From 28cf4e463be1e79da9c8140a2429ad09f40c316e Mon Sep 17 00:00:00 2001 From: Ben Nahill Date: Fri, 19 Apr 2013 11:10:04 -0400 Subject: [PATCH] stm32w: Added sample target configuration for STM32W108 with STLink-V2 As requested, here is the target configuration that I'm using for an STLink-V2-attached STM32W108C8. For some reason, it only seems to work with "reset_config trst_only". Change-Id: Icbff4f83343e1f505d8afdfc53ff6f8b7496cac9 Signed-off-by: Ben Nahill Reviewed-on: http://openocd.zylin.com/1347 Tested-by: jenkins Reviewed-by: Freddie Chopin --- tcl/target/stm32w108_stlink.cfg | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) create mode 100644 tcl/target/stm32w108_stlink.cfg diff --git a/tcl/target/stm32w108_stlink.cfg b/tcl/target/stm32w108_stlink.cfg new file mode 100644 index 00000000..c28b9b99 --- /dev/null +++ b/tcl/target/stm32w108_stlink.cfg @@ -0,0 +1,23 @@ +# +# STM32W108xx stlink pseudo target +# + +if { [info exists CHIPNAME] == 0 } { + set CHIPNAME stm32w108 +} + +if { [info exists CPUTAPID] == 0 } { + set CPUTAPID 0x1ba01477 +} + +if { [info exists WORKAREASIZE] == 0 } { + # 4k -- This should work for all chips, though perhaps not optimally + set WORKAREASIZE 0x1000 +} + +source [find target/stm32_stlink.cfg] + +# Use the flash driver from the EM357 +set _FLASHNAME $_CHIPNAME.flash +# 64k (0x10000) of flash +flash bank $_FLASHNAME em357 0x08000000 0x10000 0 0 $_TARGETNAME -- 2.39.5