From 2d0c3d6b168854260aa2e80852d3d618aa3347e9 Mon Sep 17 00:00:00 2001 From: Andre Przywara Date: Wed, 4 Jul 2018 14:16:38 +0100 Subject: [PATCH] sunxi: DT: H3: update board .dts files from Linux Update the .dts file for the various boards with an Allwinner H3 SoC. This is as of v4.18-rc3, exactly Linux commit: commit 721afaa2aeb860067decdddadc84ed16f42f2048 (HEAD) Merge: 7c00e8ae041b 87815dda5593 Author: Linus Torvalds Date: Mon Jun 11 17:57:38 2018 -0700 Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc This also includes the OrangePi Zero .dts, which technically has an Allwinner H2+ SoC. Signed-off-by: Andre Przywara Acked-by: Maxime Ripard Acked-by: Jagan Teki --- arch/arm/dts/sun8i-h2-plus-orangepi-zero.dts | 51 ++++++- arch/arm/dts/sun8i-h3-bananapi-m2-plus.dts | 90 ++++++++---- arch/arm/dts/sun8i-h3-libretech-all-h3-cc.dts | 3 +- arch/arm/dts/sun8i-h3-nanopi-m1-plus.dts | 78 ++++++++++ arch/arm/dts/sun8i-h3-nanopi-m1.dts | 42 ++++++ arch/arm/dts/sun8i-h3-nanopi-neo-air.dts | 26 +++- arch/arm/dts/sun8i-h3-nanopi-neo.dts | 17 +++ arch/arm/dts/sun8i-h3-nanopi.dtsi | 11 +- arch/arm/dts/sun8i-h3-orangepi-2.dts | 88 +++++++---- arch/arm/dts/sun8i-h3-orangepi-lite.dts | 53 ++++--- arch/arm/dts/sun8i-h3-orangepi-one.dts | 114 +++++++++++--- arch/arm/dts/sun8i-h3-orangepi-pc-plus.dts | 9 +- arch/arm/dts/sun8i-h3-orangepi-pc.dts | 139 +++++++++++++++--- arch/arm/dts/sun8i-h3-orangepi-plus.dts | 29 ++-- arch/arm/dts/sun8i-h3-orangepi-plus2e.dts | 15 +- 15 files changed, 604 insertions(+), 161 deletions(-) diff --git a/arch/arm/dts/sun8i-h2-plus-orangepi-zero.dts b/arch/arm/dts/sun8i-h2-plus-orangepi-zero.dts index 7c38264246..0bc031fe4c 100644 --- a/arch/arm/dts/sun8i-h2-plus-orangepi-zero.dts +++ b/arch/arm/dts/sun8i-h2-plus-orangepi-zero.dts @@ -49,7 +49,6 @@ #include #include -#include / { model = "Xunlong Orange Pi Zero"; @@ -58,6 +57,7 @@ aliases { serial0 = &uart0; /* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */ + ethernet0 = &emac; ethernet1 = &xr819; }; @@ -92,9 +92,14 @@ wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; + post-power-on-delay-ms = <200>; }; }; +&ehci0 { + status = "okay"; +}; + &ehci1 { status = "okay"; }; @@ -109,8 +114,7 @@ &mmc0 { vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ - cd-inverted; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ status = "okay"; }; @@ -130,17 +134,56 @@ }; }; +&ohci0 { + status = "okay"; +}; + &ohci1 { status = "okay"; }; +&spi0 { + /* Disable SPI NOR by default: it optional on Orange Pi Zero boards */ + status = "disabled"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mxicy,mx25l1606e", "winbond,w25q128"; + reg = <0>; + spi-max-frequency = <40000000>; + }; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; status = "okay"; }; +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + status = "disabled"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + status = "disabled"; +}; + +&usb_otg { + dr_mode = "peripheral"; + status = "okay"; +}; + &usbphy { - /* USB VBUS is always on */ + /* + * USB Type-A port VBUS is always on. However, MicroUSB VBUS can only + * power up the board; when it's used as OTG port, this VBUS is + * always off even if the board is powered via GPIO pins. + */ status = "okay"; + usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ }; diff --git a/arch/arm/dts/sun8i-h3-bananapi-m2-plus.dts b/arch/arm/dts/sun8i-h3-bananapi-m2-plus.dts index 124ec472d1..30540dc8e0 100644 --- a/arch/arm/dts/sun8i-h3-bananapi-m2-plus.dts +++ b/arch/arm/dts/sun8i-h3-bananapi-m2-plus.dts @@ -46,13 +46,13 @@ #include #include -#include / { model = "Banana Pi BPI-M2-Plus"; compatible = "sinovoip,bpi-m2-plus", "allwinner,sun8i-h3"; aliases { + ethernet0 = &emac; serial0 = &uart0; serial1 = &uart1; }; @@ -61,10 +61,20 @@ stdout-path = "serial0:115200n8"; }; + connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; - pinctrl-0 = <&pwr_led_bpi_m2p>; pwr_led { label = "bananapi-m2-plus:red:pwr"; @@ -76,7 +86,6 @@ gpio_keys { compatible = "gpio-keys"; pinctrl-names = "default"; - pinctrl-0 = <&sw_r_bpi_m2p>; sw4 { label = "power"; @@ -85,14 +94,27 @@ }; }; + reg_gmac_3v3: gmac-3v3 { + compatible = "regulator-fixed"; + regulator-name = "gmac-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100000>; + enable-active-high; + gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; + }; + wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; pinctrl-names = "default"; - pinctrl-0 = <&wifi_en_bpi_m2p>; reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ }; }; +&de { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -105,6 +127,33 @@ status = "okay"; }; +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_rgmii_pins>; + phy-supply = <®_gmac_3v3>; + phy-handle = <&ext_rgmii_phy>; + phy-mode = "rgmii"; + + status = "okay"; +}; + +&external_mdio { + ext_rgmii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; +}; + +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &ir { pinctrl-names = "default"; pinctrl-0 = <&ir_pins_a>; @@ -114,8 +163,7 @@ &mmc0 { vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ - cd-inverted; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ status = "okay"; }; @@ -127,7 +175,7 @@ non-removable; status = "okay"; - brcmf: bcrmf@1 { + brcmf: wifi@1 { reg = <1>; compatible = "brcm,bcm4329-fmac"; interrupt-parent = <&pio>; @@ -158,27 +206,9 @@ status = "okay"; }; -&r_pio { - pwr_led_bpi_m2p: led_pins@0 { - allwinner,pins = "PL10"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; - }; - - sw_r_bpi_m2p: key_pins@0 { - allwinner,pins = "PL3"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; - }; - - wifi_en_bpi_m2p: wifi_en_pin { - allwinner,pins = "PL7"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; - }; +®_usb0_vbus { + gpio = <&pio 3 11 GPIO_ACTIVE_HIGH>; /* PD11 */ + status = "okay"; }; &uart0 { @@ -199,6 +229,8 @@ }; &usbphy { - /* USB VBUS is on as long as VCC-IO is on */ + usb0_id_det-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ + usb0_vbus-supply = <®_usb0_vbus>; + /* USB host VBUS is on as long as VCC-IO is on */ status = "okay"; }; diff --git a/arch/arm/dts/sun8i-h3-libretech-all-h3-cc.dts b/arch/arm/dts/sun8i-h3-libretech-all-h3-cc.dts index 50f2fb30d2..a8b2f0f1c1 100644 --- a/arch/arm/dts/sun8i-h3-libretech-all-h3-cc.dts +++ b/arch/arm/dts/sun8i-h3-libretech-all-h3-cc.dts @@ -1,6 +1,7 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (C) 2017 Chen-Yu Tsai + * + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ /dts-v1/; diff --git a/arch/arm/dts/sun8i-h3-nanopi-m1-plus.dts b/arch/arm/dts/sun8i-h3-nanopi-m1-plus.dts index 8ddd1b2cc0..65cba10508 100644 --- a/arch/arm/dts/sun8i-h3-nanopi-m1-plus.dts +++ b/arch/arm/dts/sun8i-h3-nanopi-m1-plus.dts @@ -45,6 +45,28 @@ / { model = "FriendlyArm NanoPi M1 Plus"; compatible = "friendlyarm,nanopi-m1-plus", "allwinner,sun8i-h3"; + + aliases { + serial1 = &uart3; + ethernet0 = &emac; + ethernet1 = &sdio_wifi; + }; + + reg_gmac_3v3: gmac-3v3 { + compatible = "regulator-fixed"; + regulator-name = "gmac-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100000>; + enable-active-high; + gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; + }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ + }; }; &ehci1 { @@ -55,6 +77,56 @@ status = "okay"; }; +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_rgmii_pins>; + phy-supply = <®_gmac_3v3>; + phy-handle = <&ext_rgmii_phy>; + phy-mode = "rgmii"; + + status = "okay"; +}; + +&external_mdio { + ext_rgmii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <7>; + }; +}; + +&ir { + pinctrl-names = "default"; + pinctrl-0 = <&ir_pins_a>; + status = "okay"; +}; + +&mmc1 { + vmmc-supply = <®_vcc3v3>; + vqmmc-supply = <®_vcc3v3>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; + + sdio_wifi: sdio_wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&pio>; + interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */ + interrupt-names = "host-wake"; + }; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_8bit_pins>; + vmmc-supply = <®_vcc3v3>; + vqmmc-supply = <®_vcc3v3>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + &ohci1 { status = "okay"; }; @@ -62,3 +134,9 @@ &ohci2 { status = "okay"; }; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>, <&uart3_rts_cts_pins>; + status = "okay"; +}; diff --git a/arch/arm/dts/sun8i-h3-nanopi-m1.dts b/arch/arm/dts/sun8i-h3-nanopi-m1.dts index ec63d104b4..9412668bb8 100644 --- a/arch/arm/dts/sun8i-h3-nanopi-m1.dts +++ b/arch/arm/dts/sun8i-h3-nanopi-m1.dts @@ -45,6 +45,25 @@ / { model = "FriendlyArm NanoPi M1"; compatible = "friendlyarm,nanopi-m1", "allwinner,sun8i-h3"; + + aliases { + ethernet0 = &emac; + }; + + connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; +}; + +&de { + status = "okay"; }; &ehci1 { @@ -55,6 +74,29 @@ status = "okay"; }; +&emac { + phy-handle = <&int_mii_phy>; + phy-mode = "mii"; + allwinner,leds-active-low; + status = "okay"; +}; + +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&ir { + pinctrl-names = "default"; + pinctrl-0 = <&ir_pins_a>; + status = "okay"; +}; + &ohci1 { status = "okay"; }; diff --git a/arch/arm/dts/sun8i-h3-nanopi-neo-air.dts b/arch/arm/dts/sun8i-h3-nanopi-neo-air.dts index 4208a6a638..6246d3eff3 100644 --- a/arch/arm/dts/sun8i-h3-nanopi-neo-air.dts +++ b/arch/arm/dts/sun8i-h3-nanopi-neo-air.dts @@ -45,7 +45,6 @@ #include "sunxi-common-regulators.dtsi" #include -#include / { model = "FriendlyARM NanoPi NEO Air"; @@ -73,16 +72,37 @@ gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; /* PA10 */ }; }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ + }; }; &mmc0 { vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ - cd-inverted; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ status = "okay"; }; +&mmc1 { + vmmc-supply = <®_vcc3v3>; + vqmmc-supply = <®_vcc3v3>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; + + brcmf: bcrmf@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&pio>; + interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */ + interrupt-names = "host-wake"; + }; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; diff --git a/arch/arm/dts/sun8i-h3-nanopi-neo.dts b/arch/arm/dts/sun8i-h3-nanopi-neo.dts index 78f6c24952..9f33f6fae5 100644 --- a/arch/arm/dts/sun8i-h3-nanopi-neo.dts +++ b/arch/arm/dts/sun8i-h3-nanopi-neo.dts @@ -47,9 +47,26 @@ compatible = "friendlyarm,nanopi-neo", "allwinner,sun8i-h3"; }; +&ehci0 { + status = "okay"; +}; + &emac { phy-handle = <&int_mii_phy>; phy-mode = "mii"; allwinner,leds-active-low; status = "okay"; }; + +&ohci0 { + status = "okay"; +}; + +&usb_otg { + status = "okay"; + dr_mode = "peripheral"; +}; + +&usbphy { + usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ +}; diff --git a/arch/arm/dts/sun8i-h3-nanopi.dtsi b/arch/arm/dts/sun8i-h3-nanopi.dtsi index 8b1b250bda..f110ee3822 100644 --- a/arch/arm/dts/sun8i-h3-nanopi.dtsi +++ b/arch/arm/dts/sun8i-h3-nanopi.dtsi @@ -81,7 +81,7 @@ pinctrl-names = "default"; pinctrl-0 = <&sw_r_npi>; - k1@0 { + k1 { label = "k1"; linux,code = ; gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; @@ -95,8 +95,7 @@ &mmc0 { bus-width = <4>; - cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; status = "okay"; vmmc-supply = <®_vcc3v3>; }; @@ -106,19 +105,19 @@ }; &pio { - leds_npi: led_pins@0 { + leds_npi: led_pins { pins = "PA10"; function = "gpio_out"; }; }; &r_pio { - leds_r_npi: led_pins@0 { + leds_r_npi: led_pins { pins = "PL10"; function = "gpio_out"; }; - sw_r_npi: key_pins@0 { + sw_r_npi: key_pins { pins = "PL3"; function = "gpio_in"; }; diff --git a/arch/arm/dts/sun8i-h3-orangepi-2.dts b/arch/arm/dts/sun8i-h3-orangepi-2.dts index b8320d2dd8..f1fc6bdca8 100644 --- a/arch/arm/dts/sun8i-h3-orangepi-2.dts +++ b/arch/arm/dts/sun8i-h3-orangepi-2.dts @@ -46,7 +46,6 @@ #include #include -#include / { model = "Xunlong Orange Pi 2"; @@ -63,6 +62,17 @@ stdout-path = "serial0:115200n8"; }; + connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -106,6 +116,19 @@ }; }; +&codec { + allwinner,pa-gpios = <&pio 0 16 GPIO_ACTIVE_HIGH>; /* PA16 */ + allwinner,audio-routing = + "Speaker", "LINEOUT", + "MIC1", "Mic", + "Mic", "MBIAS"; + status = "okay"; +}; + +&de { + status = "okay"; +}; + &ehci1 { status = "okay"; }; @@ -117,6 +140,16 @@ status = "okay"; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &ir { pinctrl-names = "default"; pinctrl-0 = <&ir_pins_a>; @@ -126,8 +159,7 @@ &mmc0 { vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ - cd-inverted; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ status = "okay"; }; @@ -148,34 +180,26 @@ }; &pio { - leds_opc: led_pins@0 { - allwinner,pins = "PA15"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + leds_opc: led_pins { + pins = "PA15"; + function = "gpio_out"; }; }; &r_pio { - leds_r_opc: led_pins@0 { - allwinner,pins = "PL10"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + leds_r_opc: led_pins { + pins = "PL10"; + function = "gpio_out"; }; - sw_r_opc: key_pins@0 { - allwinner,pins = "PL3", "PL4"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; + sw_r_opc: key_pins { + pins = "PL3", "PL4"; + function = "gpio_in"; }; - wifi_pwrseq_pin_orangepi: wifi_pwrseq_pin@0 { - allwinner,pins = "PL7"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + wifi_pwrseq_pin_orangepi: wifi_pwrseq_pin { + pins = "PL7"; + function = "gpio_out"; }; }; @@ -190,8 +214,22 @@ status = "okay"; }; -&usb1_vbus_pin_a { - allwinner,pins = "PG13"; +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + status = "disabled"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + status = "disabled"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; + status = "disabled"; }; &usbphy { diff --git a/arch/arm/dts/sun8i-h3-orangepi-lite.dts b/arch/arm/dts/sun8i-h3-orangepi-lite.dts index b9b2b78cd9..476ae8e387 100644 --- a/arch/arm/dts/sun8i-h3-orangepi-lite.dts +++ b/arch/arm/dts/sun8i-h3-orangepi-lite.dts @@ -46,7 +46,6 @@ #include #include -#include / { model = "Xunlong Orange Pi Lite"; @@ -62,6 +61,17 @@ stdout-path = "serial0:115200n8"; }; + connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -92,6 +102,10 @@ }; }; +&de { + status = "okay"; +}; + &ehci1 { status = "okay"; }; @@ -100,6 +114,16 @@ status = "okay"; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &ir { pinctrl-names = "default"; pinctrl-0 = <&ir_pins_a>; @@ -109,8 +133,7 @@ &mmc0 { vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ - cd-inverted; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ status = "okay"; }; @@ -138,27 +161,21 @@ }; &pio { - leds_opc: led_pins@0 { - allwinner,pins = "PA15"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + leds_opc: led_pins { + pins = "PA15"; + function = "gpio_out"; }; }; &r_pio { - leds_r_opc: led_pins@0 { - allwinner,pins = "PL10"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + leds_r_opc: led_pins { + pins = "PL10"; + function = "gpio_out"; }; - sw_r_opc: key_pins@0 { - allwinner,pins = "PL3"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; + sw_r_opc: key_pins { + pins = "PL3"; + function = "gpio_in"; }; }; diff --git a/arch/arm/dts/sun8i-h3-orangepi-one.dts b/arch/arm/dts/sun8i-h3-orangepi-one.dts index 16e602be1e..245fd658de 100644 --- a/arch/arm/dts/sun8i-h3-orangepi-one.dts +++ b/arch/arm/dts/sun8i-h3-orangepi-one.dts @@ -46,7 +46,6 @@ #include #include -#include / { model = "Xunlong Orange Pi One"; @@ -61,6 +60,17 @@ stdout-path = "serial0:115200n8"; }; + connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -89,6 +99,35 @@ gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; }; }; + + reg_vdd_cpux: vdd-cpux-regulator { + compatible = "regulator-gpio"; + regulator-name = "vdd-cpux"; + regulator-type = "voltage"; + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-ramp-delay = <50>; /* 4ms */ + + gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ + enable-active-high; + gpios-states = <0x1>; + states = <1100000 0x0 + 1300000 0x1>; + }; +}; + +&cpu0 { + cpu-supply = <®_vdd_cpux>; +}; + +&de { + status = "okay"; +}; + +&ehci0 { + status = "okay"; }; &ehci1 { @@ -102,11 +141,24 @@ status = "okay"; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &mmc0 { vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ - cd-inverted; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ + status = "okay"; +}; + +&ohci0 { status = "okay"; }; @@ -115,37 +167,61 @@ }; &pio { - leds_opc: led_pins@0 { - allwinner,pins = "PA15"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + leds_opc: led_pins { + pins = "PA15"; + function = "gpio_out"; }; }; &r_pio { - leds_r_opc: led_pins@0 { - allwinner,pins = "PL10"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + leds_r_opc: led_pins { + pins = "PL10"; + function = "gpio_out"; }; - sw_r_opc: key_pins@0 { - allwinner,pins = "PL3"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; + sw_r_opc: key_pins { + pins = "PL3"; + function = "gpio_in"; }; }; +®_usb0_vbus { + gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */ + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; status = "okay"; }; +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + status = "disabled"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + status = "disabled"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; + status = "disabled"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + &usbphy { - /* USB VBUS is always on */ + /* USB Type-A port's VBUS is always on */ + usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ + usb0_vbus-supply = <®_usb0_vbus>; status = "okay"; }; diff --git a/arch/arm/dts/sun8i-h3-orangepi-pc-plus.dts b/arch/arm/dts/sun8i-h3-orangepi-pc-plus.dts index 4653cac49b..71fb732089 100644 --- a/arch/arm/dts/sun8i-h3-orangepi-pc-plus.dts +++ b/arch/arm/dts/sun8i-h3-orangepi-pc-plus.dts @@ -53,6 +53,11 @@ }; }; +&emac { + /* LEDs changed to active high on the plus */ + /delete-property/ allwinner,leds-active-low; +}; + &mmc1 { vmmc-supply = <®_vcc3v3>; bus-width = <4>; @@ -80,7 +85,7 @@ &mmc2_8bit_pins { /* Increase drive strength for DDR modes */ - allwinner,drive = ; + drive-strength = <40>; /* eMMC is missing pull-ups */ - allwinner,pull = ; + bias-pull-up; }; diff --git a/arch/arm/dts/sun8i-h3-orangepi-pc.dts b/arch/arm/dts/sun8i-h3-orangepi-pc.dts index 3ae8f7c00e..4624033412 100644 --- a/arch/arm/dts/sun8i-h3-orangepi-pc.dts +++ b/arch/arm/dts/sun8i-h3-orangepi-pc.dts @@ -46,7 +46,6 @@ #include #include -#include / { model = "Xunlong Orange Pi PC"; @@ -61,6 +60,17 @@ stdout-path = "serial0:115200n8"; }; + connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -91,6 +101,26 @@ }; }; +&codec { + allwinner,audio-routing = + "Line Out", "LINEOUT", + "MIC1", "Mic", + "Mic", "MBIAS"; + status = "okay"; +}; + +&de { + status = "okay"; +}; + +&cpu0 { + cpu-supply = <®_vdd_cpux>; +}; + +&ehci0 { + status = "okay"; +}; + &ehci1 { status = "okay"; }; @@ -103,6 +133,23 @@ status = "okay"; }; +&emac { + phy-handle = <&int_mii_phy>; + phy-mode = "mii"; + allwinner,leds-active-low; + status = "okay"; +}; + +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &ir { pinctrl-names = "default"; pinctrl-0 = <&ir_pins_a>; @@ -112,8 +159,11 @@ &mmc0 { vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ - cd-inverted; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ + status = "okay"; +}; + +&ohci0 { status = "okay"; }; @@ -130,44 +180,85 @@ }; &pio { - leds_opc: led_pins@0 { - allwinner,pins = "PA15"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + leds_opc: led_pins { + pins = "PA15"; + function = "gpio_out"; + }; +}; + +&r_i2c { + status = "okay"; + + reg_vdd_cpux: regulator@65 { + compatible = "silergy,sy8106a"; + reg = <0x65>; + regulator-name = "vdd-cpux"; + silergy,fixed-microvolt = <1200000>; + /* + * The datasheet uses 1.1V as the minimum value of VDD-CPUX, + * however both the Armbian DVFS table and the official one + * have operating points with voltage under 1.1V, and both + * DVFS table are known to work properly at the lowest + * operating point. + * + * Use 1.0V as the minimum voltage instead. + */ + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + regulator-always-on; }; }; &r_pio { - leds_r_opc: led_pins@0 { - allwinner,pins = "PL10"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + leds_r_opc: led_pins { + pins = "PL10"; + function = "gpio_out"; }; - sw_r_opc: key_pins@0 { - allwinner,pins = "PL3"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; + sw_r_opc: key_pins { + pins = "PL3"; + function = "gpio_in"; }; }; +®_usb0_vbus { + gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */ + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; status = "okay"; }; -&usbphy { - /* USB VBUS is always on */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + status = "disabled"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + status = "disabled"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; + status = "disabled"; +}; + +&usb_otg { + dr_mode = "otg"; status = "okay"; }; -&emac { - phy-handle = <&int_mii_phy>; - phy-mode = "mii"; - allwinner,leds-active-low; +&usbphy { + usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ + usb0_vbus-supply = <®_usb0_vbus>; + /* VBUS on USB host ports are always on */ status = "okay"; }; diff --git a/arch/arm/dts/sun8i-h3-orangepi-plus.dts b/arch/arm/dts/sun8i-h3-orangepi-plus.dts index 136e4414a4..b403e5d787 100644 --- a/arch/arm/dts/sun8i-h3-orangepi-plus.dts +++ b/arch/arm/dts/sun8i-h3-orangepi-plus.dts @@ -47,10 +47,12 @@ model = "Xunlong Orange Pi Plus / Plus 2"; compatible = "xunlong,orangepi-plus", "allwinner,sun8i-h3"; + aliases { + ethernet0 = &emac; + }; + reg_gmac_3v3: gmac-3v3 { compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&gmac_power_pin_orangepi>; regulator-name = "gmac-3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -77,11 +79,13 @@ }; &emac { - /* The Orange Pi Plus uses an external phy */ pinctrl-names = "default"; pinctrl-0 = <&emac_rgmii_pins>; phy-supply = <®_gmac_3v3>; + phy-handle = <&ext_rgmii_phy>; phy-mode = "rgmii"; + + status = "okay"; }; &external_mdio { @@ -103,24 +107,15 @@ &mmc2_8bit_pins { /* Increase drive strength for DDR modes */ - allwinner,drive = ; + drive-strength = <40>; /* eMMC is missing pull-ups */ - allwinner,pull = ; + bias-pull-up; }; &pio { - gmac_power_pin_orangepi: gmac_power_pin@0 { - allwinner,pins = "PD6"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; - }; - - usb3_vbus_pin_a: usb3_vbus_pin@0 { - allwinner,pins = "PG11"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + usb3_vbus_pin_a: usb3_vbus_pin { + pins = "PG11"; + function = "gpio_out"; }; }; diff --git a/arch/arm/dts/sun8i-h3-orangepi-plus2e.dts b/arch/arm/dts/sun8i-h3-orangepi-plus2e.dts index 51aaf49b6d..6dbf7b2e0c 100644 --- a/arch/arm/dts/sun8i-h3-orangepi-plus2e.dts +++ b/arch/arm/dts/sun8i-h3-orangepi-plus2e.dts @@ -53,24 +53,22 @@ reg_gmac_3v3: gmac-3v3 { compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&gmac_power_pin_orangepi>; regulator-name = "gmac-3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; startup-delay-us = <100000>; enable-active-high; - gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; + gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* PD6 */ }; }; &emac { - /* The Orange Pi Plus 2E uses an external gbit phy */ pinctrl-names = "default"; pinctrl-0 = <&emac_rgmii_pins>; phy-supply = <®_gmac_3v3>; phy-handle = <&ext_rgmii_phy>; phy-mode = "rgmii"; + status = "okay"; }; &external_mdio { @@ -79,12 +77,3 @@ reg = <1>; }; }; - -&pio { - gmac_power_pin_orangepi: gmac_power_pin@0 { - allwinner,pins = "PD6"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; - }; -}; -- 2.39.5