From 2d83476a4c1c9911d158a3f8a4312d354bc1bdb7 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Tue, 23 Oct 2007 14:03:17 +0200 Subject: [PATCH] ppc4xx: Change 4xx_enet & miiphy to use out_be32() and friends This patch changes all in32/out32 calls to use the recommended in_be32/ out_be32 macros instead. Signed-off-by: Stefan Roese --- cpu/ppc4xx/4xx_enet.c | 118 +++++++++++++++++++++--------------------- cpu/ppc4xx/miiphy.c | 29 ++++++----- 2 files changed, 74 insertions(+), 73 deletions(-) diff --git a/cpu/ppc4xx/4xx_enet.c b/cpu/ppc4xx/4xx_enet.c index 67b3a24d2f..6ab04e73d5 100644 --- a/cpu/ppc4xx/4xx_enet.c +++ b/cpu/ppc4xx/4xx_enet.c @@ -81,6 +81,7 @@ #include #include #include +#include #include #include #include @@ -221,7 +222,7 @@ static void ppc_4xx_eth_halt (struct eth_device *dev) unsigned long mfr; #endif - out32 (EMAC_IER + hw_p->hw_addr, 0x00000000); /* disable emac interrupts */ + out_be32((void *)EMAC_IER + hw_p->hw_addr, 0x00000000); /* disable emac interrupts */ /* 1st reset MAL channel */ /* Note: writing a 0 to a channel has no effect */ @@ -250,7 +251,7 @@ static void ppc_4xx_eth_halt (struct eth_device *dev) mtsdr(sdr_mfr, mfr); #endif - out32 (EMAC_M0 + hw_p->hw_addr, EMAC_M0_SRST); + out_be32((void *)EMAC_M0 + hw_p->hw_addr, EMAC_M0_SRST); #if defined(CONFIG_440SPE) || \ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ @@ -353,8 +354,8 @@ int ppc_4xx_eth_setup_bridge(int devnum, bd_t * bis) /* Ensure we setup mdio for this devnum and ONLY this devnum */ zmiifer |= (ZMII_FER_MDI) << ZMII_FER_V(devnum); - out32 (ZMII_FER, zmiifer); - out32 (RGMII_FER, rmiifer); + out_be32(ZMII_FER, zmiifer); + out_be32(RGMII_FER, rmiifer); return ((int)pfc1); } @@ -372,31 +373,31 @@ int ppc_4xx_eth_setup_bridge(int devnum, bd_t * bis) switch (pfc1) { case SDR0_PFC1_SELECT_CONFIG_2: /* 1 x GMII port */ - out32 (ZMII_FER, 0x00); - out32 (RGMII_FER, 0x00000037); + out_be32((void *)ZMII_FER, 0x00); + out_be32((void *)RGMII_FER, 0x00000037); bis->bi_phymode[0] = BI_PHYMODE_GMII; bis->bi_phymode[1] = BI_PHYMODE_NONE; break; case SDR0_PFC1_SELECT_CONFIG_4: /* 2 x RGMII ports */ - out32 (ZMII_FER, 0x00); - out32 (RGMII_FER, 0x00000055); + out_be32((void *)ZMII_FER, 0x00); + out_be32((void *)RGMII_FER, 0x00000055); bis->bi_phymode[0] = BI_PHYMODE_RGMII; bis->bi_phymode[1] = BI_PHYMODE_RGMII; break; case SDR0_PFC1_SELECT_CONFIG_6: /* 2 x SMII ports */ - out32 (ZMII_FER, - ((ZMII_FER_SMII) << ZMII_FER_V(0)) | - ((ZMII_FER_SMII) << ZMII_FER_V(1))); - out32 (RGMII_FER, 0x00000000); + out_be32((void *)ZMII_FER, + ((ZMII_FER_SMII) << ZMII_FER_V(0)) | + ((ZMII_FER_SMII) << ZMII_FER_V(1))); + out_be32((void *)RGMII_FER, 0x00000000); bis->bi_phymode[0] = BI_PHYMODE_SMII; bis->bi_phymode[1] = BI_PHYMODE_SMII; break; case SDR0_PFC1_SELECT_CONFIG_1_2: /* only 1 x MII supported */ - out32 (ZMII_FER, (ZMII_FER_MII) << ZMII_FER_V(0)); - out32 (RGMII_FER, 0x00000000); + out_be32((void *)ZMII_FER, (ZMII_FER_MII) << ZMII_FER_V(0)); + out_be32((void *)RGMII_FER, 0x00000000); bis->bi_phymode[0] = BI_PHYMODE_MII; bis->bi_phymode[1] = BI_PHYMODE_NONE; break; @@ -405,9 +406,9 @@ int ppc_4xx_eth_setup_bridge(int devnum, bd_t * bis) } /* Ensure we setup mdio for this devnum and ONLY this devnum */ - zmiifer = in32 (ZMII_FER); + zmiifer = in_be32((void *)ZMII_FER); zmiifer |= (ZMII_FER_MDI) << ZMII_FER_V(devnum); - out32 (ZMII_FER, zmiifer); + out_be32((void *)ZMII_FER, zmiifer); return ((int)0x0); } @@ -425,7 +426,7 @@ int ppc_4xx_eth_setup_bridge(int devnum, bd_t * bis) switch (1) { case 1: /* 2 x RGMII ports */ - out32 (RGMII_FER, 0x00000055); + out_be32((void *)RGMII_FER, 0x00000055); bis->bi_phymode[0] = BI_PHYMODE_RGMII; bis->bi_phymode[1] = BI_PHYMODE_RGMII; break; @@ -437,9 +438,9 @@ int ppc_4xx_eth_setup_bridge(int devnum, bd_t * bis) } /* Ensure we setup mdio for this devnum and ONLY this devnum */ - gmiifer = in32(RGMII_FER); + gmiifer = in_be32((void *)RGMII_FER); gmiifer |= (1 << (19-devnum)); - out32 (RGMII_FER, gmiifer); + out_be32((void *)RGMII_FER, gmiifer); return ((int)0x0); } @@ -535,27 +536,27 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis) /* NOTE: Therefore, disable all other EMACS, since we handle */ /* NOTE: only one emac at a time */ reg = 0; - out32 (ZMII_FER, 0); + out_be32((void *)ZMII_FER, 0); udelay (100); #if defined(CONFIG_440EP) || defined(CONFIG_440GR) - out32 (ZMII_FER, (ZMII_FER_RMII | ZMII_FER_MDI) << ZMII_FER_V (devnum)); + out_be32((void *)ZMII_FER, (ZMII_FER_RMII | ZMII_FER_MDI) << ZMII_FER_V (devnum)); #elif defined(CONFIG_440GX) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX) ethgroup = ppc_4xx_eth_setup_bridge(devnum, bis); #elif defined(CONFIG_440GP) /* set RMII mode */ - out32 (ZMII_FER, ZMII_RMII | ZMII_MDI0); + out_be32((void *)ZMII_FER, ZMII_RMII | ZMII_MDI0); #else if ((devnum == 0) || (devnum == 1)) { - out32 (ZMII_FER, (ZMII_FER_SMII | ZMII_FER_MDI) << ZMII_FER_V (devnum)); + out_be32((void *)ZMII_FER, (ZMII_FER_SMII | ZMII_FER_MDI) << ZMII_FER_V (devnum)); } else { /* ((devnum == 2) || (devnum == 3)) */ - out32 (ZMII_FER, ZMII_FER_MDI << ZMII_FER_V (devnum)); - out32 (RGMII_FER, ((RGMII_FER_RGMII << RGMII_FER_V (2)) | - (RGMII_FER_RGMII << RGMII_FER_V (3)))); + out_be32((void *)ZMII_FER, ZMII_FER_MDI << ZMII_FER_V (devnum)); + out_be32((void *)RGMII_FER, ((RGMII_FER_RGMII << RGMII_FER_V (2)) | + (RGMII_FER_RGMII << RGMII_FER_V (3)))); } #endif - out32 (ZMII_SSR, ZMII_SSR_SP << ZMII_SSR_V(devnum)); + out_be32((void *)ZMII_SSR, ZMII_SSR_SP << ZMII_SSR_V(devnum)); #endif /* defined(CONFIG_440) && !defined(CONFIG_440SP) */ #if defined(CONFIG_405EX) ethgroup = ppc_4xx_eth_setup_bridge(devnum, bis); @@ -573,11 +574,10 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis) mtsdr(sdr_mfr, mfr); #endif - out32 (EMAC_M0 + hw_p->hw_addr, EMAC_M0_SRST); - __asm__ volatile ("eieio"); + out_be32((void *)EMAC_M0 + hw_p->hw_addr, EMAC_M0_SRST); failsafe = 1000; - while ((in32 (EMAC_M0 + hw_p->hw_addr) & (EMAC_M0_SRST)) && failsafe) { + while ((in_be32((void *)EMAC_M0 + hw_p->hw_addr) & (EMAC_M0_SRST)) && failsafe) { udelay (1000); failsafe--; } @@ -610,7 +610,7 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis) else mode_reg |= EMAC_M1_OBCI_GT100; - out32 (EMAC_M1 + hw_p->hw_addr, mode_reg); + out_be32((void *)EMAC_M1 + hw_p->hw_addr, mode_reg); #endif /* defined(CONFIG_440GX) || defined(CONFIG_440SP) */ /* wait for PHY to complete auto negotiation */ @@ -768,11 +768,11 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis) #endif /* Set ZMII/RGMII speed according to the phy link speed */ - reg = in32 (ZMII_SSR); + reg = in_be32(ZMII_SSR); if ( (speed == 100) || (speed == 1000) ) - out32 (ZMII_SSR, reg | (ZMII_SSR_SP << ZMII_SSR_V (devnum))); + out_be32(ZMII_SSR, reg | (ZMII_SSR_SP << ZMII_SSR_V (devnum))); else - out32 (ZMII_SSR, reg & (~(ZMII_SSR_SP << ZMII_SSR_V (devnum)))); + out_be32(ZMII_SSR, reg & (~(ZMII_SSR_SP << ZMII_SSR_V (devnum)))); if ((devnum == 2) || (devnum == 3)) { if (speed == 1000) @@ -785,7 +785,7 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis) printf("Error in RGMII Speed\n"); return -1; } - out32 (RGMII_SSR, reg); + out_be32(RGMII_SSR, reg); } #endif /* defined(CONFIG_440) && !defined(CONFIG_440SP) */ @@ -801,7 +801,7 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis) printf("Error in RGMII Speed\n"); return -1; } - out32 (RGMII_SSR, reg); + out_be32((void *)RGMII_SSR, reg); #endif /* set the Mal configuration reg */ @@ -912,7 +912,7 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis) reg = reg << 8; reg |= dev->enetaddr[1]; - out32 (EMAC_IAH + hw_p->hw_addr, reg); + out_be32((void *)EMAC_IAH + hw_p->hw_addr, reg); reg = 0x00000000; reg |= dev->enetaddr[2]; /* set low address */ @@ -923,7 +923,7 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis) reg = reg << 8; reg |= dev->enetaddr[5]; - out32 (EMAC_IAL + hw_p->hw_addr, reg); + out_be32((void *)EMAC_IAL + hw_p->hw_addr, reg); switch (devnum) { case 1: @@ -984,10 +984,10 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis) mtdcr (malrxcasr, (MAL_TXRX_CASR >> hw_p->devnum)); /* set transmit enable & receive enable */ - out32 (EMAC_M0 + hw_p->hw_addr, EMAC_M0_TXE | EMAC_M0_RXE); + out_be32((void *)EMAC_M0 + hw_p->hw_addr, EMAC_M0_TXE | EMAC_M0_RXE); /* set receive fifo to 4k and tx fifo to 2k */ - mode_reg = in32 (EMAC_M1 + hw_p->hw_addr); + mode_reg = in_be32((void *)EMAC_M1 + hw_p->hw_addr); mode_reg |= EMAC_M1_RFS_4K | EMAC_M1_TX_FIFO_2K; /* set speed */ @@ -1008,39 +1008,39 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis) if (duplex == FULL) mode_reg = mode_reg | 0x80000000 | EMAC_M1_IST; - out32 (EMAC_M1 + hw_p->hw_addr, mode_reg); + out_be32((void *)EMAC_M1 + hw_p->hw_addr, mode_reg); /* Enable broadcast and indvidual address */ /* TBS: enabling runts as some misbehaved nics will send runts */ - out32 (EMAC_RXM + hw_p->hw_addr, EMAC_RMR_BAE | EMAC_RMR_IAE); + out_be32((void *)EMAC_RXM + hw_p->hw_addr, EMAC_RMR_BAE | EMAC_RMR_IAE); /* we probably need to set the tx mode1 reg? maybe at tx time */ /* set transmit request threshold register */ - out32 (EMAC_TRTR + hw_p->hw_addr, 0x18000000); /* 256 byte threshold */ + out_be32((void *)EMAC_TRTR + hw_p->hw_addr, 0x18000000); /* 256 byte threshold */ /* set receive low/high water mark register */ #if defined(CONFIG_440) /* 440s has a 64 byte burst length */ - out32 (EMAC_RX_HI_LO_WMARK + hw_p->hw_addr, 0x80009000); + out_be32((void *)EMAC_RX_HI_LO_WMARK + hw_p->hw_addr, 0x80009000); #else /* 405s have a 16 byte burst length */ - out32 (EMAC_RX_HI_LO_WMARK + hw_p->hw_addr, 0x0f002000); + out_be32((void *)EMAC_RX_HI_LO_WMARK + hw_p->hw_addr, 0x0f002000); #endif /* defined(CONFIG_440) */ - out32 (EMAC_TXM1 + hw_p->hw_addr, 0xf8640000); + out_be32((void *)EMAC_TXM1 + hw_p->hw_addr, 0xf8640000); /* Set fifo limit entry in tx mode 0 */ - out32 (EMAC_TXM0 + hw_p->hw_addr, 0x00000003); + out_be32((void *)EMAC_TXM0 + hw_p->hw_addr, 0x00000003); /* Frame gap set */ - out32 (EMAC_I_FRAME_GAP_REG + hw_p->hw_addr, 0x00000008); + out_be32((void *)EMAC_I_FRAME_GAP_REG + hw_p->hw_addr, 0x00000008); /* Set EMAC IER */ hw_p->emac_ier = EMAC_ISR_PTLE | EMAC_ISR_BFCS | EMAC_ISR_ORE | EMAC_ISR_IRE; if (speed == _100BASET) hw_p->emac_ier = hw_p->emac_ier | EMAC_ISR_SYE; - out32 (EMAC_ISR + hw_p->hw_addr, 0xffffffff); /* clear pending interrupts */ - out32 (EMAC_IER + hw_p->hw_addr, hw_p->emac_ier); + out_be32((void *)EMAC_ISR + hw_p->hw_addr, 0xffffffff); /* clear pending interrupts */ + out_be32((void *)EMAC_IER + hw_p->hw_addr, hw_p->emac_ier); if (hw_p->first_init == 0) { /* @@ -1098,8 +1098,8 @@ static int ppc_4xx_eth_send (struct eth_device *dev, volatile void *ptr, __asm__ volatile ("eieio"); - out32 (EMAC_TXM0 + hw_p->hw_addr, - in32 (EMAC_TXM0 + hw_p->hw_addr) | EMAC_TXM0_GNP0); + out_be32((void *)EMAC_TXM0 + hw_p->hw_addr, + in_be32((void *)EMAC_TXM0 + hw_p->hw_addr) | EMAC_TXM0_GNP0); #ifdef INFO_4XX_ENET hw_p->stats.pkts_tx++; #endif @@ -1109,7 +1109,7 @@ static int ppc_4xx_eth_send (struct eth_device *dev, volatile void *ptr, *-----------------------------------------------------------------------*/ time_start = get_timer (0); while (1) { - temp_txm0 = in32 (EMAC_TXM0 + hw_p->hw_addr); + temp_txm0 = in_be32((void *)EMAC_TXM0 + hw_p->hw_addr); /* loop until either TINT turns on or 3 seconds elapse */ if ((temp_txm0 & EMAC_TXM0_GNP0) != 0) { /* transmit is done, so now check for errors @@ -1218,7 +1218,7 @@ int enetInt (struct eth_device *dev) /* port by port dispatch of emac interrupts */ if (hw_p->devnum == 0) { if (UIC_ETH0 & my_uicmsr_ethx) { /* look for EMAC errors */ - emac_isr = in32 (EMAC_ISR + hw_p->hw_addr); + emac_isr = in_be32((void *)EMAC_ISR + hw_p->hw_addr); if ((hw_p->emac_ier & emac_isr) != 0) { emac_err (dev, emac_isr); serviced = 1; @@ -1237,7 +1237,7 @@ int enetInt (struct eth_device *dev) #if !defined(CONFIG_440SP) if (hw_p->devnum == 1) { if (UIC_ETH1 & my_uicmsr_ethx) { /* look for EMAC errors */ - emac_isr = in32 (EMAC_ISR + hw_p->hw_addr); + emac_isr = in_be32((void *)EMAC_ISR + hw_p->hw_addr); if ((hw_p->emac_ier & emac_isr) != 0) { emac_err (dev, emac_isr); serviced = 1; @@ -1255,7 +1255,7 @@ int enetInt (struct eth_device *dev) #if defined (CONFIG_440GX) if (hw_p->devnum == 2) { if (UIC_ETH2 & my_uic2msr) { /* look for EMAC errors */ - emac_isr = in32 (EMAC_ISR + hw_p->hw_addr); + emac_isr = in_be32((void *)EMAC_ISR + hw_p->hw_addr); if ((hw_p->emac_ier & emac_isr) != 0) { emac_err (dev, emac_isr); serviced = 1; @@ -1273,7 +1273,7 @@ int enetInt (struct eth_device *dev) if (hw_p->devnum == 3) { if (UIC_ETH3 & my_uic2msr) { /* look for EMAC errors */ - emac_isr = in32 (EMAC_ISR + hw_p->hw_addr); + emac_isr = in_be32((void *)EMAC_ISR + hw_p->hw_addr); if ((hw_p->emac_ier & emac_isr) != 0) { emac_err (dev, emac_isr); serviced = 1; @@ -1385,7 +1385,7 @@ int enetInt (struct eth_device *dev) /* port by port dispatch of emac interrupts */ if ((SEL_UIC_DEF(hw_p->devnum) & my_uicmsr) != 0) { /* look for EMAC errors */ - emac_isr = in32 (EMAC_ISR + hw_p->hw_addr); + emac_isr = in_be32((void *)EMAC_ISR + hw_p->hw_addr); if ((hw_p->emac_ier & emac_isr) != 0) { emac_err (dev, emac_isr); serviced = 1; @@ -1459,7 +1459,7 @@ static void emac_err (struct eth_device *dev, unsigned long isr) EMAC_4XX_HW_PST hw_p = dev->priv; printf ("EMAC%d error occured.... ISR = %lx\n", hw_p->devnum, isr); - out32 (EMAC_ISR + hw_p->hw_addr, isr); + out_be32((void *)EMAC_ISR + hw_p->hw_addr, isr); } /*-----------------------------------------------------------------------------+ diff --git a/cpu/ppc4xx/miiphy.c b/cpu/ppc4xx/miiphy.c index 2c675e9be6..98ba0a7b35 100644 --- a/cpu/ppc4xx/miiphy.c +++ b/cpu/ppc4xx/miiphy.c @@ -44,6 +44,7 @@ #include #include +#include #include #include #include @@ -113,7 +114,7 @@ unsigned int miiphy_getemac_offset (void) unsigned long eoffset; /* Need to find out which mdi port we're using */ - zmii = in32 (ZMII_FER); + zmii = in_be32((void *)ZMII_FER); if (zmii & (ZMII_FER_MDI << ZMII_FER_V (0))) { /* using port 0 */ @@ -131,12 +132,12 @@ unsigned int miiphy_getemac_offset (void) /* None of the mdi ports are enabled! */ /* enable port 0 */ zmii |= ZMII_FER_MDI << ZMII_FER_V (0); - out32 (ZMII_FER, zmii); + out_be32((void *)ZMII_FER, zmii); eoffset = 0; /* need to soft reset port 0 */ - zmii = in32 (EMAC_M0); + zmii = in_be32((void *)EMAC_M0); zmii |= EMAC_M0_SRST; - out32 (EMAC_M0, zmii); + out_be32((void *)EMAC_M0, zmii); } return (eoffset); @@ -146,7 +147,7 @@ unsigned int miiphy_getemac_offset (void) unsigned long rgmii; int devnum = 1; - rgmii = in32(RGMII_FER); + rgmii = in_be32((void *)RGMII_FER); if (rgmii & (1 << (19 - devnum))) return 0x100; #endif @@ -169,11 +170,11 @@ int emac4xx_miiphy_read (char *devname, unsigned char addr, i = 0; /* see if it is ready for sec */ - while ((in32 (EMAC_STACR + emac_reg) & EMAC_STACR_OC) == EMAC_STACR_OC_MASK) { + while ((in_be32((void *)EMAC_STACR + emac_reg) & EMAC_STACR_OC) == EMAC_STACR_OC_MASK) { udelay (7); if (i > 5) { #ifdef ET_DEBUG - sta_reg = in32 (EMAC_STACR + emac_reg); + sta_reg = in_be32((void *)EMAC_STACR + emac_reg); printf ("read : EMAC_STACR=0x%0x\n", sta_reg); /* test-only */ printf ("read err 1\n"); #endif @@ -203,12 +204,12 @@ int emac4xx_miiphy_read (char *devname, unsigned char addr, #endif sta_reg = sta_reg | (addr << 5); /* Phy address */ sta_reg = sta_reg | EMAC_STACR_OC_MASK; /* new IBM emac v4 */ - out32 (EMAC_STACR + emac_reg, sta_reg); + out_be32((void *)EMAC_STACR + emac_reg, sta_reg); #ifdef ET_DEBUG printf ("a2: write: EMAC_STACR=0x%0x\n", sta_reg); /* test-only */ #endif - sta_reg = in32 (EMAC_STACR + emac_reg); + sta_reg = in_be32((void *)EMAC_STACR + emac_reg); #ifdef ET_DEBUG printf ("a21: read : EMAC_STACR=0x%0x\n", sta_reg); /* test-only */ #endif @@ -219,7 +220,7 @@ int emac4xx_miiphy_read (char *devname, unsigned char addr, return -1; } i++; - sta_reg = in32 (EMAC_STACR + emac_reg); + sta_reg = in_be32((void *)EMAC_STACR + emac_reg); #ifdef ET_DEBUG printf ("a22: read : EMAC_STACR=0x%0x\n", sta_reg); /* test-only */ #endif @@ -250,7 +251,7 @@ int emac4xx_miiphy_write (char *devname, unsigned char addr, /* see if it is ready for 1000 nsec */ i = 0; - while ((in32 (EMAC_STACR + emac_reg) & EMAC_STACR_OC) == EMAC_STACR_OC_MASK) { + while ((in_be32((void *)EMAC_STACR + emac_reg) & EMAC_STACR_OC) == EMAC_STACR_OC_MASK) { if (i > 5) return -1; udelay (7); @@ -281,11 +282,11 @@ int emac4xx_miiphy_write (char *devname, unsigned char addr, sta_reg = sta_reg | EMAC_STACR_OC_MASK; /* new IBM emac v4 */ memcpy (&sta_reg, &value, 2); /* put in data */ - out32 (EMAC_STACR + emac_reg, sta_reg); + out_be32((void *)EMAC_STACR + emac_reg, sta_reg); /* wait for completion */ i = 0; - sta_reg = in32 (EMAC_STACR + emac_reg); + sta_reg = in_be32((void *)EMAC_STACR + emac_reg); #ifdef ET_DEBUG printf ("a31: read : EMAC_STACR=0x%0x\n", sta_reg); /* test-only */ #endif @@ -294,7 +295,7 @@ int emac4xx_miiphy_write (char *devname, unsigned char addr, if (i > 5) return -1; i++; - sta_reg = in32 (EMAC_STACR + emac_reg); + sta_reg = in_be32((void *)EMAC_STACR + emac_reg); #ifdef ET_DEBUG printf ("a32: read : EMAC_STACR=0x%0x\n", sta_reg); /* test-only */ #endif -- 2.39.5