From 31a649234ee4051e96cf45285cdf2dbfa668d30c Mon Sep 17 00:00:00 2001 From: wdenk Date: Sat, 28 Aug 2004 21:09:14 +0000 Subject: [PATCH] * Add automatic update support for LWMON board * Enable MSDOS/VFAT filesystem support for LWMON board * Clear Block Lock-Bits when erasing flash on LWMON board. * Fix return code of "fatload" command * Disable debugging for TQM5200 board --- CHANGELOG | 8 ++++++++ Makefile | 4 ++-- board/lwmon/flash.c | 21 +++++++++++++++++++++ common/cmd_fat.c | 15 ++++++++------- include/configs/TQM5200.h | 4 +--- include/configs/lwmon.h | 27 ++++++++++++++++++--------- 6 files changed, 58 insertions(+), 21 deletions(-) diff --git a/CHANGELOG b/CHANGELOG index e7d1e73f94..64fee4a2a9 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,14 @@ Changes since U-Boot 1.1.1: ====================================================================== +* Add automatic update support for LWMON board + +* Clear Block Lock-Bits when erasing flash on LWMON board. + +* Fix return code of "fatload" command + +* Enable MSDOS/VFAT filesystem support for LWMON board + * Patch by Martin Krause, 03 Aug 2004: change timing for SM501 graphics controller on TQM5200 module diff --git a/Makefile b/Makefile index 1bf8a6557e..f9557057c7 100644 --- a/Makefile +++ b/Makefile @@ -315,12 +315,12 @@ MiniFAP_config: unconfig @[ -z "$(findstring AB,$@)" ] || \ { echo "#define CONFIG_TQM5200_AB" >>include/config.h ; \ echo "... with 64 MB Flash, 64 MB SDRAM, 32 kB EEPROM, 512 kB SRAM" ; \ - echo "... with Grafic Controller"; \ + echo "... with Graphics Controller"; \ } @[ -z "$(findstring AC,$@)" ] || \ { echo "#define CONFIG_TQM5200_AC" >>include/config.h ; \ echo "... with 4 MB Flash, 128 MB SDRAM" ; \ - echo "... with Grafic Controller"; \ + echo "... with Graphics Controller"; \ } @./mkconfig -a TQM5200 ppc mpc5xxx tqm5200 diff --git a/board/lwmon/flash.c b/board/lwmon/flash.c index 4004865c31..b894887c93 100644 --- a/board/lwmon/flash.c +++ b/board/lwmon/flash.c @@ -403,6 +403,26 @@ int flash_erase (flash_info_t *info, int s_first, int s_last) /* Disable interrupts which might cause a timeout here */ flag = disable_interrupts(); + *addr = 0x00600060; /* clear lock bit setup */ + *addr = 0x00D000D0; /* clear lock bit confirm */ + + udelay (1000); + /* This takes awfully long - up to 50 ms and more */ + while (((status = *addr) & 0x00800080) != 0x00800080) { + if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) { + printf ("Timeout\n"); + *addr = 0x00FF00FF; /* reset to read mode */ + return 1; + } + + /* show that we're waiting */ + if ((now - last) > 1000) { /* every second */ + putc ('.'); + last = now; + } + udelay (1000); /* to trigger the watchdog */ + } + *addr = 0x00500050; /* clear status register */ *addr = 0x00200020; /* erase setup */ *addr = 0x00D000D0; /* erase confirm */ @@ -427,6 +447,7 @@ int flash_erase (flash_info_t *info, int s_first, int s_last) putc ('.'); last = now; } + udelay (1000); /* to trigger the watchdog */ } *addr = 0x00FF00FF; /* reset to read mode */ diff --git a/common/cmd_fat.c b/common/cmd_fat.c index 150a2ea67c..6844c103f2 100644 --- a/common/cmd_fat.c +++ b/common/cmd_fat.c @@ -86,7 +86,7 @@ int do_fat_fsload (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) if (argc < 5) { printf ("usage: fatload [bytes]\n"); - return (0); + return 1; } dev = (int)simple_strtoul (argv[2], &ep, 16); dev_desc=get_dev(argv[1],dev); @@ -114,14 +114,15 @@ int do_fat_fsload (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) if(size==-1) { printf("\n** Unable to read \"%s\" from %s %d:%d **\n",argv[4],argv[1],dev,part); - } else { - printf ("\n%ld bytes read\n", size); - - sprintf(buf, "%lX", size); - setenv("filesize", buf); + return 1; } - return size; + printf ("\n%ld bytes read\n", size); + + sprintf(buf, "%lX", size); + setenv("filesize", buf); + + return 0; } diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h index 1f83aa53d5..7d39f2299b 100644 --- a/include/configs/TQM5200.h +++ b/include/configs/TQM5200.h @@ -27,8 +27,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#define DEBUG 1 - /* * High Level Configuration Options * (easy to change) @@ -64,7 +62,7 @@ */ #define CONFIG_PCI 0 #define CONFIG_PCI_PNP 1 -#define CONFIG_PCI_SCAN_SHOW 1 +/* #define CONFIG_PCI_SCAN_SHOW 1 */ #define CONFIG_PCI_MEM_BUS 0x40000000 #define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS diff --git a/include/configs/lwmon.h b/include/configs/lwmon.h index a76ec23652..74186a86ee 100644 --- a/include/configs/lwmon.h +++ b/include/configs/lwmon.h @@ -78,12 +78,24 @@ #define CONFIG_BOOTCOMMAND "run flash_self" +/* + * Keyboard commands: + * # = 0x28 = ENTER : enable bootmessages on LCD + * 2 = 0x3A+0x3C = F1 + F3 : enable update mode + * 3 = 0x3C+0x3F = F3 + F6 : enable test mode + */ #define CONFIG_EXTRA_ENV_SETTINGS \ "kernel_addr=40080000\0" \ "ramdisk_addr=40280000\0" \ - "magic_keys=#3\0" \ + "magic_keys=#23\0" \ "key_magic#=28\0" \ "key_cmd#=setenv addfb setenv 'bootargs $bootargs console=tty0'\0" \ + "key_magic2=3A+3C\0" \ + "key_cmd2=echo *** Entering Update Mode ***;" \ + "if fatload ide 0:3 10000 update.scr;" \ + "then autoscr 10000;" \ + "else echo *** UPDATE FAILED ***;" \ + "fi\0" \ "key_magic3=3C+3F\0" \ "key_cmd3=echo *** Entering Test Mode ***;" \ "setenv add_misc 'setenv bootargs $bootargs testmode'\0" \ @@ -153,6 +165,7 @@ CFG_CMD_ASKENV | \ CFG_CMD_DHCP | \ CFG_CMD_DATE | \ + CFG_CMD_FAT | \ CFG_CMD_I2C | \ CFG_CMD_EEPROM | \ CFG_CMD_IDE | \ @@ -276,18 +289,12 @@ */ #define CFG_FLASH_BUFFER_SIZE (2*32) -#if 1 -/* Put environment in flash which is much faster to boot */ +/* Put environment in flash which is much faster to boot than using the EEPROM */ #define CFG_ENV_IS_IN_FLASH 1 #define CFG_ENV_ADDR 0x40040000 /* Address of Environment Sector */ #define CFG_ENV_SIZE 0x2000 /* Total Size of Environment */ #define CFG_ENV_SECT_SIZE 0x40000 /* we have BIG sectors only :-( */ -#else -/* Environment in EEPROM */ -#define CFG_ENV_IS_IN_EEPROM 1 -#define CFG_ENV_OFFSET 0 -#define CFG_ENV_SIZE 2048 -#endif + /*----------------------------------------------------------------------- * I2C/EEPROM Configuration */ @@ -488,6 +495,8 @@ /* Offset for alternate registers */ #define CFG_ATA_ALT_OFFSET 0x0100 +#define CONFIG_SUPPORT_VFAT /* enable VFAT support */ + /*----------------------------------------------------------------------- * *----------------------------------------------------------------------- -- 2.39.5