From 337540b41c3041db70eb982019569abb5abc61b9 Mon Sep 17 00:00:00 2001 From: Kurt Zeilenga Date: Thu, 17 Sep 1998 02:22:11 +0000 Subject: [PATCH] Replaced with ldapconfig.h.in --- include/ldapconfig.h.edit | 268 -------------------------------------- 1 file changed, 268 deletions(-) delete mode 100644 include/ldapconfig.h.edit diff --git a/include/ldapconfig.h.edit b/include/ldapconfig.h.edit deleted file mode 100644 index 723bde2472..0000000000 --- a/include/ldapconfig.h.edit +++ /dev/null @@ -1,268 +0,0 @@ -/* - * Copyright (c) 1994 Regents of the University of Michigan. - * All rights reserved. - * - * Redistribution and use in source and binary forms are permitted - * provided that this notice is preserved and that due credit is given - * to the University of Michigan at Ann Arbor. The name of the University - * may not be used to endorse or promote products derived from this - * software without specific prior written permission. This software - * is provided ``as is'' without express or implied warranty. - */ - -#ifndef _CONFIG_H -#define _CONFIG_H - -/* - * config.h for LDAP -- edit this file to customize LDAP client behavior. - * NO platform-specific definitions should be placed in this file. - * Note that this is NOT used by the LDAP or LBER libraries. - */ - -/* - * SHARED DEFINITIONS - things you should change - */ - /* default ldap host */ -#define LDAPHOST "localhost" - /* default place to start searching */ -#define DEFAULT_BASE "o=Your Organization Name, c=US" - -/********************************************************************* - * * - * You probably do not need to edit anything below this point * - * * - *********************************************************************/ - -/* - * SHARED DEFINITIONS - other things you can change - */ - /* default attribute to use when sorting entries, NULL => sort by DN */ -#define SORT_ATTR NULL - /* default count of DN components to show in entry displays */ -#define DEFAULT_RDNCOUNT 2 - /* default config file locations */ -#define FILTERFILE "%ETCDIR%/ldapfilter.conf" -#define TEMPLATEFILE "%ETCDIR%/ldaptemplates.conf" -#define SEARCHFILE "%ETCDIR%/ldapsearchprefs.conf" -#define FRIENDLYFILE "%ETCDIR%/ldapfriendly" - -/* - * FINGER DEFINITIONS - */ - /* who to bind as */ -#define FINGER_BINDDN NULL - /* where to search */ -#define FINGER_BASE DEFAULT_BASE - /* banner to print */ -#define FINGER_BANNER "X.500 Finger Service...\r\n" - /* who to report errors to */ -#define FINGER_ERRORS "your local system administrator" - /* what to say if no matches are found */ -#define FINGER_NOMATCH "Search failed to find anything.\r\n" - /* what to say if the service may be unavailable */ -#define FINGER_UNAVAILABLE \ -"The X.500 service may be temporarily unavailable.\r\n\ -Please try again later.\r\n" - /* printed if a match has no email address - for disptmp default */ -#define FINGER_NOEMAIL1 "None registered in this service." -#define FINGER_NOEMAIL2 NULL -#define FINGER_NOEMAIL { FINGER_NOEMAIL1, FINGER_NOEMAIL2, NULL } - /* maximum number of matches returned */ -#define FINGER_SIZELIMIT 50 - /* max number of hits displayed in full before a list is presented */ -#define FINGER_LISTLIMIT 1 - /* what to exec for "finger @host" */ -#define FINGER_CMD "/usr/ucb/finger" - /* how to treat aliases when searching */ -#define FINGER_DEREF LDAP_DEREF_FINDING - /* attribute to use when sorting results */ -#define FINGER_SORT_ATTR SORT_ATTR - /* enable ufn support */ -#define FINGER_UFN - /* timeout for searches */ -#define FINGER_TIMEOUT 60 - /* number of DN components to show in entry displays */ -#define FINGER_RDNCOUNT DEFAULT_RDNCOUNT - -/* - * GO500 GOPHER GATEWAY DEFINITIONS - */ - /* who to bind as */ -#define GO500_BINDDN NULL - /* where to search */ -#define GO500_BASE DEFAULT_BASE - /* port on which to listen */ -#define GO500_PORT 5555 - /* how to handle aliases */ -#define GO500_DEREF LDAP_DEREF_FINDING - /* attribute to use when sorting results */ -#define GO500_SORT_ATTR SORT_ATTR - /* timeout for searches */ -#define GO500_TIMEOUT 180 - /* enable ufn support */ -#define GO500_UFN - /* - * only set and uncomment this if your hostname() does not return - * a fully qualified hostname - */ -/* #define GO500_HOSTNAME "fully.qualified.hostname.here" */ - /* number of DN components to show in entry displays */ -#define GO500_RDNCOUNT DEFAULT_RDNCOUNT - -/* - * GO500GW GOPHER GATEWAY DEFINITIONS - */ - /* who to bind as */ -#define GO500GW_BINDDN NULL - /* where the helpfile lives */ -#define GO500GW_HELPFILE "%ETCDIR%/go500gw.help" - /* port on which to listen */ -#define GO500GW_PORT 7777 - /* timeout on all searches */ -#define GO500GW_TIMEOUT 180 - /* enable ufn support */ -#define GO500GW_UFN - /* attribute to use when sorting results */ -#define GO500GW_SORT_ATTR SORT_ATTR - /* - * only set and uncomment this if your hostname() does not return - * a fully qualified hostname - */ -/* #define GO500GW_HOSTNAME "fully.qualified.hostname.here" */ - /* number of DN components to show in entry displays */ -#define GO500GW_RDNCOUNT DEFAULT_RDNCOUNT - -/* - * RCPT500 MAIL RESPONDER GATEWAY DEFINITIONS - */ - /* who to bind as */ -#define RCPT500_BINDDN NULL - /* where the helpfile lives */ -#define RCPT500_HELPFILE "%ETCDIR%/rcpt500.help" - /* maximum number of matches returned */ -#define RCPT500_SIZELIMIT 50 - /* address replies will appear to come from */ -#define RCPT500_FROM "\"X.500 Query Program\" " - /* command that will accept an RFC822 message text on standard - input, and send it. sendmail -t does this nicely. */ -#define RCPT500_PIPEMAILCMD "/usr/lib/sendmail -t" - /* where to search */ -#define RCPT500_BASE DEFAULT_BASE - /* attribute to use when sorting results */ -#define RCPT500_SORT_ATTR SORT_ATTR - /* max number of hits displayed in full before a list is presented */ -#define RCPT500_LISTLIMIT 1 - /* enable ufn support */ -#define RCPT500_UFN - /* number of DN components to show in entry displays */ -#define RCPT500_RDNCOUNT DEFAULT_RDNCOUNT - -/* - * LDAPSEARCH TOOL - */ - /* who to bind as */ -#define LDAPSEARCH_BINDDN NULL - /* search base */ -#define LDAPSEARCH_BASE DEFAULT_BASE - -/* - * LDAPMODIFY TOOL - */ - /* who to bind as */ -#define LDAPMODIFY_BINDDN NULL - /* search base */ -#define LDAPMODIFY_BASE DEFAULT_BASE - -/* - * LDAPDELETE TOOL - */ - /* who to bind as */ -#define LDAPDELETE_BINDDN NULL - /* search base */ -#define LDAPDELETE_BASE DEFAULT_BASE - -/* - * LDAPMODRDN TOOL - */ - /* who to bind as */ -#define LDAPMODRDN_BINDDN NULL - /* search base */ -#define LDAPMODRDN_BASE DEFAULT_BASE - -/* - * MAIL500 MAILER DEFINITIONS - */ - /* who to bind as */ -#define MAIL500_BINDDN NULL - /* max number of ambiguous matches reported */ -#define MAIL500_MAXAMBIGUOUS 10 - /* max subscribers allowed (size limit when searching for them ) */ -#define MAIL500_MAXGROUPMEMBERS LDAP_NO_LIMIT - /* timeout for all searches */ -#define MAIL500_TIMEOUT 180 - /* sendmail location - mail500 needs to exec this */ -#define MAIL500_SENDMAIL "/usr/lib/sendmail" - -/* - * UD DEFINITIONS - */ - /* ud configuration file */ -#define UD_CONFIG_FILE "%ETCDIR%/ud.conf" - /* default editor */ -#define UD_DEFAULT_EDITOR "/usr/ucb/vi" - /* default bbasename of user config file */ -#define UD_USER_CONFIG_FILE ".udrc" - /* default user to bind as */ -#define UD_BINDDN NULL - /* default password to bind with */ -#define UD_PASSWD NULL - /* default search base */ -#define UD_BASE DEFAULT_BASE - /* default base where groups are created */ -#define UD_WHERE_GROUPS_ARE_CREATED "" - /* default base below which all groups live */ -#define UD_WHERE_ALL_GROUPS_LIVE "" - -/* - * FAX500 DEFINITIONS - */ - /* what to bind as */ -#define FAX_BINDDN NULL - /* how long to wait for searches */ -#define FAX_TIMEOUT 180 - /* maximum number of ambiguous matches reported */ -#define FAX_MAXAMBIGUOUS 10 - /* maximum number of members allowed */ -#define FAX_MAXMEMBERS LDAP_NO_LIMIT - /* program to send mail */ -#define FAX_SENDMAIL "/usr/lib/sendmail" - -/* - * RP500 DEFINITIONS - */ - /* what to bind as */ -#define RP_BINDDN NULL - /* prefix to add to non-fully-qualified numbers */ -#define RP_PHONEPREFIX "" - -/* - * SLAPD DEFINITIONS - */ - /* location of the default slapd config file */ -#define SLAPD_DEFAULT_CONFIGFILE "%ETCDIR%/slapd.conf" - /* default sizelimit on number of entries from a search */ -#define SLAPD_DEFAULT_SIZELIMIT 500 - /* default timelimit to spend on a search */ -#define SLAPD_DEFAULT_TIMELIMIT 3600 - /* location of the slapd pid file */ -#define SLAPD_PIDFILE "%ETCDIR%/slapd.pid" - /* location of the slapd args file */ -#define SLAPD_ARGSFILE "%ETCDIR%/slapd.args" - /* dn of the special "monitor" entry */ -#define SLAPD_MONITOR_DN "cn=monitor" - /* dn of the special "config" entry */ -#define SLAPD_CONFIG_DN "cn=config" - /* minimum max ids that a single index entry can map to in ldbm */ -#define SLAPD_LDBM_MIN_MAXIDS 4000 - -#endif /* _CONFIG_H */ -- 2.39.5