From 33f70625d7a9f6392fa7d549d696e5955543fa69 Mon Sep 17 00:00:00 2001 From: Robert Jordens Date: Thu, 28 Sep 2017 14:40:47 +0200 Subject: [PATCH] sayma_amc: add Sayma AMC board definition Change-Id: I4a3dc5fe2d81b6906099af8cc1a360b3cf4a6b80 Signed-off-by: Robert Jordens Reviewed-on: http://openocd.zylin.com/4237 Tested-by: jenkins Reviewed-by: Matthias Welwarsky --- tcl/board/sayma_amc.cfg | 45 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 45 insertions(+) create mode 100644 tcl/board/sayma_amc.cfg diff --git a/tcl/board/sayma_amc.cfg b/tcl/board/sayma_amc.cfg new file mode 100644 index 00000000..5d338ed8 --- /dev/null +++ b/tcl/board/sayma_amc.cfg @@ -0,0 +1,45 @@ +# Sayma AMC is an FPGA board for the µTCA AMC format +# The board is open hardware (CERN OHL) and the gateware and software +# running on it are open source (ARTIQ, LGPLv3+). +# +# https://github.com/m-labs/sinara/wiki/Sayma +# +# It contains a Xilinx Kintex Ultrascale 040 FPGA (xcku040). +# There is a SCANSTA112SM JTAG router on the board which is configured to +# automatically add devices to the JTAG svcan chain when they are added. +# Sayma AMC is usually combined with Sayma RTM (rear transition module) +# which features an Artix 7 FPGA. + +interface ftdi +ftdi_device_desc "Quad RS232-HS" +ftdi_vid_pid 0x0403 0x6011 +ftdi_channel 0 +# Use this to distinguish multiple boards by topology +#ftdi_location 5:1 +# sampling on falling edge generally seems to work and accelerates things but +# is not fully tested +#ftdi_tdo_sample_edge falling +# EN_USB_JTAG on ADBUS7: out, high +# USB_nTRST on ADBUS4: out, high, but R46 is DNP +ftdi_layout_init 0x0098 0x008b +#ftdi_layout_signal EN_USB -data 0x0080 +#ftdi_layout_signal nTRST -data 0x0010 +reset_config none + +adapter_khz 5000 + +transport select jtag + +# Add the RTM Artix to the chain. Note that this changes the PLD numbering. +# Unfortunately openocd TAPs can't be disabled after they have been added and +# before `init`. +#source [find cpld/xilinx-xc7.cfg] + +set CHIP XCKU040 +source [find cpld/xilinx-xcu.cfg] + +set XILINX_USER1 0x02 +set XILINX_USER2 0x03 +set JTAGSPI_IR $XILINX_USER1 +source [find cpld/jtagspi.cfg] +flash bank xcu.spi1 jtagspi 0 0 0 0 xcu.proxy $XILINX_USER2 -- 2.39.5