From 3687c4155af6ad502ca216a123cff852917dd364 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Thu, 15 Mar 2012 18:33:21 +0000 Subject: [PATCH] i.MX28: Do data transfers via DMA in MMC driver This utilizes the newly introduced bounce buffers in the MMC layer. Signed-off-by: Marek Vasut Cc: Stefano Babic Cc: Andy Fleming Cc: Fabio Estevam --- drivers/mmc/mxsmmc.c | 70 +++++++++++++++++++++++++------------------- 1 file changed, 40 insertions(+), 30 deletions(-) diff --git a/drivers/mmc/mxsmmc.c b/drivers/mmc/mxsmmc.c index 5f87a1efd6..e8bad9dc75 100644 --- a/drivers/mmc/mxsmmc.c +++ b/drivers/mmc/mxsmmc.c @@ -41,6 +41,7 @@ #include #include #include +#include struct mxsmmc_priv { int id; @@ -49,6 +50,7 @@ struct mxsmmc_priv { uint32_t *clkctrl_ssp; uint32_t buswidth; int (*mmc_is_wp)(int); + struct mxs_dma_desc *desc; }; #define MXSMMC_MAX_TIMEOUT 10000 @@ -64,8 +66,7 @@ mxsmmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data) struct mx28_ssp_regs *ssp_regs = priv->regs; uint32_t reg; int timeout; - uint32_t data_count; - uint32_t *data_ptr; + uint32_t data_count, cache_data_count; uint32_t ctrl0; debug("MMC%d: CMD%d\n", mmc->block_dev.dev, cmd->cmdidx); @@ -183,40 +184,41 @@ mxsmmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data) if (!data) return 0; - /* Process the data */ data_count = data->blocksize * data->blocks; - timeout = MXSMMC_MAX_TIMEOUT; + + if (data_count % ARCH_DMA_MINALIGN) + cache_data_count = roundup(data_count, ARCH_DMA_MINALIGN); + else + cache_data_count = data_count; + if (data->flags & MMC_DATA_READ) { - data_ptr = (uint32_t *)data->dest; - while (data_count && --timeout) { - reg = readl(&ssp_regs->hw_ssp_status); - if (!(reg & SSP_STATUS_FIFO_EMPTY)) { - *data_ptr++ = readl(&ssp_regs->hw_ssp_data); - data_count -= 4; - timeout = MXSMMC_MAX_TIMEOUT; - } else - udelay(1000); - } + priv->desc->cmd.data = MXS_DMA_DESC_COMMAND_DMA_WRITE; + priv->desc->cmd.address = (dma_addr_t)data->dest; } else { - data_ptr = (uint32_t *)data->src; - timeout *= 100; - while (data_count && --timeout) { - reg = readl(&ssp_regs->hw_ssp_status); - if (!(reg & SSP_STATUS_FIFO_FULL)) { - writel(*data_ptr++, &ssp_regs->hw_ssp_data); - data_count -= 4; - timeout = MXSMMC_MAX_TIMEOUT; - } else - udelay(1000); - } + priv->desc->cmd.data = MXS_DMA_DESC_COMMAND_DMA_READ; + priv->desc->cmd.address = (dma_addr_t)data->src; + + /* Flush data to DRAM so DMA can pick them up */ + flush_dcache_range((uint32_t)priv->desc->cmd.address, + (uint32_t)(priv->desc->cmd.address + cache_data_count)); } - if (!timeout) { - printf("MMC%d: Data timeout with command %d (status 0x%08x)!\n", - mmc->block_dev.dev, cmd->cmdidx, reg); + priv->desc->cmd.data |= MXS_DMA_DESC_IRQ | MXS_DMA_DESC_DEC_SEM | + (data_count << MXS_DMA_DESC_BYTES_OFFSET); + + + mxs_dma_desc_append(MXS_DMA_CHANNEL_AHB_APBH_SSP0, priv->desc); + if (mxs_dma_go(MXS_DMA_CHANNEL_AHB_APBH_SSP0)) { + printf("MMC%d: DMA transfer failed\n", mmc->block_dev.dev); return COMM_ERR; } + /* The data arrived into DRAM, invalidate cache over them */ + if (data->flags & MMC_DATA_READ) { + invalidate_dcache_range((uint32_t)priv->desc->cmd.address, + (uint32_t)(priv->desc->cmd.address + cache_data_count)); + } + /* Check data errors */ reg = readl(&ssp_regs->hw_ssp_status); if (reg & @@ -270,7 +272,8 @@ static int mxsmmc_init(struct mmc *mmc) /* 8 bits word length in MMC mode */ clrsetbits_le32(&ssp_regs->hw_ssp_ctrl1, SSP_CTRL1_SSP_MODE_MASK | SSP_CTRL1_WORD_LENGTH_MASK, - SSP_CTRL1_SSP_MODE_SD_MMC | SSP_CTRL1_WORD_LENGTH_EIGHT_BITS); + SSP_CTRL1_SSP_MODE_SD_MMC | SSP_CTRL1_WORD_LENGTH_EIGHT_BITS | + SSP_CTRL1_DMA_ENABLE); /* Set initial bit clock 400 KHz */ mx28_set_ssp_busclock(priv->id, 400); @@ -300,6 +303,13 @@ int mxsmmc_initialize(bd_t *bis, int id, int (*wp)(int)) return -ENOMEM; } + priv->desc = mxs_dma_desc_alloc(); + if (!priv->desc) { + free(priv); + free(mmc); + return -ENOMEM; + } + priv->mmc_is_wp = wp; priv->id = id; switch (id) { @@ -345,7 +355,7 @@ int mxsmmc_initialize(bd_t *bis, int id, int (*wp)(int)) */ mmc->f_min = 400000; mmc->f_max = mxc_get_clock(MXC_SSP0_CLK + id) * 1000 / 2; - mmc->b_max = 0; + mmc->b_max = 0x40; mmc_register(mmc); return 0; -- 2.39.5