From 373a1d8c0ee150bb3680722c5b888662e0e08291 Mon Sep 17 00:00:00 2001 From: Eric Nelson Date: Tue, 31 Jan 2012 07:52:05 +0000 Subject: [PATCH] mx6q: mx6qsabrelite: Add ECSPI support to the Sabrelite platform Signed-off-by: Eric Nelson Acked-by: Dirk Behme Acked-by: Stefano Babic Acked-by: Jason Liu Tested-by: Jason Liu --- board/freescale/mx6qsabrelite/imximage.cfg | 2 +- board/freescale/mx6qsabrelite/mx6qsabrelite.c | 25 +++++++++++++++++++ include/configs/mx6qsabrelite.h | 9 +++++++ 3 files changed, 35 insertions(+), 1 deletion(-) diff --git a/board/freescale/mx6qsabrelite/imximage.cfg b/board/freescale/mx6qsabrelite/imximage.cfg index 83dee6f3b4..c389427191 100644 --- a/board/freescale/mx6qsabrelite/imximage.cfg +++ b/board/freescale/mx6qsabrelite/imximage.cfg @@ -156,7 +156,7 @@ DATA 4 0x021b0404 0x00011006 # set the default clock gate to save power DATA 4 0x020c4068 0x00C03F3F -DATA 4 0x020c406c 0x0030FC00 +DATA 4 0x020c406c 0x0030FC03 DATA 4 0x020c4070 0x0FFFC000 DATA 4 0x020c4074 0x3FF00000 DATA 4 0x020c4078 0x00FFF300 diff --git a/board/freescale/mx6qsabrelite/mx6qsabrelite.c b/board/freescale/mx6qsabrelite/mx6qsabrelite.c index a53b01f35c..97a77e841b 100644 --- a/board/freescale/mx6qsabrelite/mx6qsabrelite.c +++ b/board/freescale/mx6qsabrelite/mx6qsabrelite.c @@ -46,6 +46,10 @@ DECLARE_GLOBAL_DATA_PTR; PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ PAD_CTL_DSE_40ohm | PAD_CTL_HYS) +#define SPI_PAD_CTRL (PAD_CTL_HYS | \ + PAD_CTL_PUS_100K_DOWN | PAD_CTL_SPEED_MED | \ + PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST) + int dram_init(void) { gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE); @@ -193,6 +197,23 @@ int board_mmc_init(bd_t *bis) } #endif +#ifdef CONFIG_MXC_SPI +iomux_v3_cfg_t ecspi1_pads[] = { + /* SS1 */ + MX6Q_PAD_EIM_D19__GPIO_3_19 | MUX_PAD_CTRL(SPI_PAD_CTRL), + MX6Q_PAD_EIM_D17__ECSPI1_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL), + MX6Q_PAD_EIM_D18__ECSPI1_MOSI | MUX_PAD_CTRL(SPI_PAD_CTRL), + MX6Q_PAD_EIM_D16__ECSPI1_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL), +}; + +void setup_spi(void) +{ + gpio_direction_output(GPIO_NUMBER(3, 19), 1); + imx_iomux_v3_setup_multiple_pads(ecspi1_pads, + ARRAY_SIZE(ecspi1_pads)); +} +#endif + #define MII_1000BASET_CTRL 0x9 #define MII_EXTENDED_CTRL 0xb #define MII_EXTENDED_DATAW 0xc @@ -239,6 +260,10 @@ int board_eth_init(bd_t *bis) return ret; } +#ifdef CONFIG_MXC_SPI + setup_spi(); +#endif + return 0; } diff --git a/include/configs/mx6qsabrelite.h b/include/configs/mx6qsabrelite.h index d650ee340a..bcb1a427e3 100644 --- a/include/configs/mx6qsabrelite.h +++ b/include/configs/mx6qsabrelite.h @@ -44,6 +44,15 @@ #define CONFIG_MXC_UART #define CONFIG_MXC_UART_BASE UART2_BASE +#define CONFIG_CMD_SF +#ifdef CONFIG_CMD_SF +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_SST +#define CONFIG_MXC_SPI +#define CONFIG_SF_DEFAULT_SPEED 25000000 +#define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0) +#endif + /* MMC Configs */ #define CONFIG_FSL_ESDHC #define CONFIG_FSL_USDHC -- 2.39.5