From 38107ff9665fd77c275fa4b840e10bc61098e293 Mon Sep 17 00:00:00 2001 From: Paul Fertser Date: Sat, 10 Jan 2015 13:52:35 +0300 Subject: [PATCH] tcl/target: consolidate Kinetis configs MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit Change-Id: I75fe6b239ff435f700459e7d7040616503fa458e Signed-off-by: Paul Fertser Reviewed-on: http://openocd.zylin.com/2460 Reviewed-by: Andreas Färber Tested-by: jenkins Reviewed-by: Spencer Oliver --- tcl/target/k40.cfg | 38 ++----------------------- tcl/target/k60.cfg | 38 ++----------------------- tcl/target/kl25.cfg | 69 ++------------------------------------------- tcl/target/kl46.cfg | 48 ++----------------------------- tcl/target/klx.cfg | 62 ++++++++++++++++++++++++++++++++++++++++ tcl/target/kx.cfg | 41 +++++++++++++++++++++++++++ 6 files changed, 111 insertions(+), 185 deletions(-) create mode 100644 tcl/target/klx.cfg create mode 100644 tcl/target/kx.cfg diff --git a/tcl/target/k40.cfg b/tcl/target/k40.cfg index b0f69940..98116115 100644 --- a/tcl/target/k40.cfg +++ b/tcl/target/k40.cfg @@ -2,39 +2,5 @@ # Freescale Kinetis K40 devices # -# -# K40 devices support both JTAG and SWD transports. -# -source [find target/swj-dp.tcl] - -if { [info exists CHIPNAME] } { - set _CHIPNAME $CHIPNAME -} else { - set _CHIPNAME k40 -} - -if { [info exists ENDIAN] } { - set _ENDIAN $ENDIAN -} else { - set _ENDIAN little -} - -if { [info exists CPUTAPID] } { - set _CPUTAPID $CPUTAPID -} else { - set _CPUTAPID 0x4ba00477 -} - -set _TARGETNAME $_CHIPNAME.cpu - -swj_newdap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID - -target create $_TARGETNAME cortex_m -chain-position $_CHIPNAME.cpu - -reset_config srst_nogate - -if {![using_hla]} { - # if srst is not fitted use SYSRESETREQ to - # perform a soft reset - cortex_m reset_config sysresetreq -} +set CHIPNAME k40 +source [find target/kx.cfg] diff --git a/tcl/target/k60.cfg b/tcl/target/k60.cfg index 0e7adc4a..b9c5e3a1 100644 --- a/tcl/target/k60.cfg +++ b/tcl/target/k60.cfg @@ -2,39 +2,5 @@ # Freescale Kinetis K60 devices # -# -# K60 devices support both JTAG and SWD transports. -# -source [find target/swj-dp.tcl] - -if { [info exists CHIPNAME] } { - set _CHIPNAME $CHIPNAME -} else { - set _CHIPNAME k60 -} - -if { [info exists ENDIAN] } { - set _ENDIAN $ENDIAN -} else { - set _ENDIAN little -} - -if { [info exists CPUTAPID] } { - set _CPUTAPID $CPUTAPID -} else { - set _CPUTAPID 0x4ba00477 -} - -set _TARGETNAME $_CHIPNAME.cpu - -swj_newdap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID - -target create $_TARGETNAME cortex_m -chain-position $_CHIPNAME.cpu - -reset_config srst_nogate - -if {![using_hla]} { - # if srst is not fitted use SYSRESETREQ to - # perform a soft reset - cortex_m reset_config sysresetreq -} +set CHIPNAME k60 +source [find target/kx.cfg] diff --git a/tcl/target/kl25.cfg b/tcl/target/kl25.cfg index b75e0a56..0e716e3a 100644 --- a/tcl/target/kl25.cfg +++ b/tcl/target/kl25.cfg @@ -2,70 +2,5 @@ # Freescale Kinetis KL25 devices # -# -# KL25 devices support both JTAG and SWD transports. -# -source [find target/swj-dp.tcl] - -if { [info exists CHIPNAME] } { - set _CHIPNAME $CHIPNAME -} else { - set _CHIPNAME kl25 -} - -if { [info exists ENDIAN] } { - set _ENDIAN $ENDIAN -} else { - set _ENDIAN little -} - -# Work-area is a space in RAM used for flash programming -# By default use 4kB -if { [info exists WORKAREASIZE] } { - set _WORKAREASIZE $WORKAREASIZE -} else { - set _WORKAREASIZE 0x1000 -} - -if { [info exists CPUTAPID] } { - set _CPUTAPID $CPUTAPID -} else { - set _CPUTAPID 0x0bc11477 -} - -swj_newdap $_CHIPNAME cpu -irlen 4 -expected-id $_CPUTAPID - -set _TARGETNAME $_CHIPNAME.cpu -target create $_TARGETNAME cortex_m -endian $_ENDIAN -chain-position $_CHIPNAME.cpu - -# It is important that "kinetis mdm check_security" is called for -# 'examine-end' event and not 'eximine-start'. Calling it in 'examine-start' -# causes "kinetis mdm check_security" to fail the first time openocd -# calls it when it tries to connect after the CPU has been power-cycled. -$_CHIPNAME.cpu configure -event examine-end { - kinetis mdm check_security -} - -$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0 - -set _FLASHNAME $_CHIPNAME.flash -flash bank $_FLASHNAME kinetis 0 0 0 0 $_TARGETNAME - -# Table 5-1. Clock Summary of KL25 Sub-Family Reference Manual -# specifies up to 1MHz for VLPR mode. -adapter_khz 1000 - -reset_config srst_nogate - -if {![using_hla]} { - # if srst is not fitted use SYSRESETREQ to - # perform a soft reset - cortex_m reset_config sysresetreq -} - -$_TARGETNAME configure -event reset-init { - # Table 5-1. Clock Summary of KL25 Sub-Family Reference Manual - # specifies up to 24MHz for run mode; Table 17 of Sub-Family Data - # Sheet rev4 lists 25MHz as the maximum frequency. - adapter_khz 24000 -} +set CHIPNAME kl25 +source [find target/klx.cfg] diff --git a/tcl/target/kl46.cfg b/tcl/target/kl46.cfg index 074f26aa..70ea273e 100644 --- a/tcl/target/kl46.cfg +++ b/tcl/target/kl46.cfg @@ -2,49 +2,5 @@ # Freescale Kinetis KL46 devices # -# -# KL46 devices supports SWD transport only. -# -source [find target/swj-dp.tcl] - -if { [info exists CHIPNAME] } { - set _CHIPNAME $CHIPNAME -} else { - set _CHIPNAME kl46 -} - -if { [info exists ENDIAN] } { - set _ENDIAN $ENDIAN -} else { - set _ENDIAN little -} - -# Work-area is a space in RAM used for flash programming -# By default use 4kB -if { [info exists WORKAREASIZE] } { - set _WORKAREASIZE $WORKAREASIZE -} else { - set _WORKAREASIZE 0x1000 -} - -if { [info exists CPUTAPID] } { - set _CPUTAPID $CPUTAPID -} else { - set _CPUTAPID 0x0bc11477 -} - -swj_newdap $_CHIPNAME cpu -irlen 4 -expected-id $_CPUTAPID - -set _TARGETNAME $_CHIPNAME.cpu -target create $_TARGETNAME cortex_m -endian $_ENDIAN -chain-position $_CHIPNAME.cpu - -$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0 - -set _FLASHNAME $_CHIPNAME.flash -flash bank $_FLASHNAME kinetis 0 0 0 0 $_TARGETNAME - -if {![using_hla]} { - # if srst is not fitted use SYSRESETREQ to - # perform a soft reset - cortex_m reset_config sysresetreq -} +set CHIPNAME kl46 +source [find target/klx.cfg] diff --git a/tcl/target/klx.cfg b/tcl/target/klx.cfg new file mode 100644 index 00000000..d2d2c284 --- /dev/null +++ b/tcl/target/klx.cfg @@ -0,0 +1,62 @@ +# +# Freescale Kinetis KL series devices +# + +source [find target/swj-dp.tcl] + +if { [info exists CHIPNAME] } { + set _CHIPNAME $CHIPNAME +} else { + set _CHIPNAME klx +} + +# Work-area is a space in RAM used for flash programming +# By default use 4kB +if { [info exists WORKAREASIZE] } { + set _WORKAREASIZE $WORKAREASIZE +} else { + set _WORKAREASIZE 0x1000 +} + +if { [info exists CPUTAPID] } { + set _CPUTAPID $CPUTAPID +} else { + set _CPUTAPID 0x0bc11477 +} + +swj_newdap $_CHIPNAME cpu -irlen 4 -expected-id $_CPUTAPID + +set _TARGETNAME $_CHIPNAME.cpu +target create $_TARGETNAME cortex_m -chain-position $_CHIPNAME.cpu + +# It is important that "kinetis mdm check_security" is called for +# 'examine-end' event and not 'eximine-start'. Calling it in 'examine-start' +# causes "kinetis mdm check_security" to fail the first time openocd +# calls it when it tries to connect after the CPU has been power-cycled. +$_CHIPNAME.cpu configure -event examine-end { + kinetis mdm check_security +} + +$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0 + +set _FLASHNAME $_CHIPNAME.flash +flash bank $_FLASHNAME kinetis 0 0 0 0 $_TARGETNAME + +# Table 5-1. Clock Summary of KL25 Sub-Family Reference Manual +# specifies up to 1MHz for VLPR mode. +adapter_khz 1000 + +reset_config srst_nogate + +if {![using_hla]} { + # if srst is not fitted use SYSRESETREQ to + # perform a soft reset + cortex_m reset_config sysresetreq +} + +$_TARGETNAME configure -event reset-init { + # Table 5-1. Clock Summary of KL25 Sub-Family Reference Manual + # specifies up to 24MHz for run mode; Table 17 of Sub-Family Data + # Sheet rev4 lists 25MHz as the maximum frequency. + adapter_khz 24000 +} diff --git a/tcl/target/kx.cfg b/tcl/target/kx.cfg new file mode 100644 index 00000000..93b2b581 --- /dev/null +++ b/tcl/target/kx.cfg @@ -0,0 +1,41 @@ +# +# Freescale Kinetis Kx series devices +# + +source [find target/swj-dp.tcl] + +if { [info exists CHIPNAME] } { + set _CHIPNAME $CHIPNAME +} else { + set _CHIPNAME kx +} + +if { [info exists ENDIAN] } { + set _ENDIAN $ENDIAN +} else { + set _ENDIAN little +} + +if { [info exists CPUTAPID] } { + set _CPUTAPID $CPUTAPID +} else { + if { [using_jtag] } { + set _CPUTAPID 0x4ba00477 + } { + set _CPUTAPID 0x2ba01477 + } +} + +set _TARGETNAME $_CHIPNAME.cpu + +swj_newdap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID + +target create $_TARGETNAME cortex_m -chain-position $_CHIPNAME.cpu + +reset_config srst_nogate + +if {![using_hla]} { + # if srst is not fitted use SYSRESETREQ to + # perform a soft reset + cortex_m reset_config sysresetreq +} -- 2.39.5