From 38510a4b34a699a534121ad3cb9096cc0fd7a86e Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Sat, 12 Jul 2014 14:24:05 +0100 Subject: [PATCH] ARM: HYP/non-sec: add the option for a second-stage monitor Allow the switch to a second stage secure monitor just before switching to non-secure. This allows a resident piece of firmware to be active once the kernel has been entered (the u-boot monitor is dead anyway, its pages being reused). Signed-off-by: Marc Zyngier Acked-by: Ian Campbell --- arch/arm/cpu/armv7/nonsec_virt.S | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/arch/arm/cpu/armv7/nonsec_virt.S b/arch/arm/cpu/armv7/nonsec_virt.S index 2a43e3c81e..745670e549 100644 --- a/arch/arm/cpu/armv7/nonsec_virt.S +++ b/arch/arm/cpu/armv7/nonsec_virt.S @@ -44,10 +44,19 @@ _monitor_vectors: * ip: target PC */ _secure_monitor: +#ifdef CONFIG_ARMV7_PSCI + ldr r5, =_psci_vectors @ Switch to the next monitor + mcr p15, 0, r5, c12, c0, 1 + isb + + @ Obtain a secure stack, and configure the PSCI backend + bl psci_arch_init +#endif + mrc p15, 0, r5, c1, c1, 0 @ read SCR - bic r5, r5, #0x4e @ clear IRQ, FIQ, EA, nET bits + bic r5, r5, #0x4a @ clear IRQ, EA, nET bits orr r5, r5, #0x31 @ enable NS, AW, FW bits - + @ FIQ preserved for secure mode mov r6, #SVC_MODE @ default mode is SVC is_cpu_virt_capable r4 #ifdef CONFIG_ARMV7_VIRT -- 2.39.5