From 3b0c3821d6401106cc873a6c27a8ee31a8d466a4 Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Fri, 1 Jun 2018 09:38:20 -0600 Subject: [PATCH] binman: Add support for outputing a map file It is useful to be able to see a list of regions in each image produced by binman. Add a -m option to output this information in a '.map' file alongside the image file. Signed-off-by: Simon Glass --- tools/binman/README | 20 +++++++++++++++++++- tools/binman/bsection.py | 9 +++++++++ tools/binman/cmdline.py | 2 ++ tools/binman/control.py | 2 ++ tools/binman/entry.py | 13 +++++++++++++ tools/binman/etype/section.py | 9 +++++++++ tools/binman/ftest.py | 31 ++++++++++++++++++++++++++----- tools/binman/image.py | 8 ++++++++ 8 files changed, 88 insertions(+), 6 deletions(-) diff --git a/tools/binman/README b/tools/binman/README index f3a979e217..64e529f06b 100644 --- a/tools/binman/README +++ b/tools/binman/README @@ -548,6 +548,25 @@ At present this feature is only supported in SPL. In principle it is possible to fill in such symbols in U-Boot proper, as well. +Map files +--------- + +The -m option causes binman to output a .map file for each image that it +generates. This shows the position and size of each entry. For example: + + Position Size Name + 00000000 00000010 section@0 + 00000000 00000004 u-boot + 00000010 00000010 section@1 + 00000000 00000004 u-boot + +This shows a hierarchical image with two sections, each with a single entry. The +positions of the sections are absolute hex byte offsets within the image. The +positions of the entries are relative to their respective sections. The size of +each entry is also shown, in bytes (hex). The indentation shows the entries +nested inside their sections. + + Code coverage ------------- @@ -628,7 +647,6 @@ Some ideas: 'Access to binman entry positions at run time' above - Use of-platdata to make the information available to code that is unable to use device tree (such as a very small SPL image) -- Write an image map to a text file - Allow easy building of images by specifying just the board name - Produce a full Python binding for libfdt (for upstream) - Add an option to decode an image into the constituent binaries diff --git a/tools/binman/bsection.py b/tools/binman/bsection.py index 331f806d9a..e0960d4078 100644 --- a/tools/binman/bsection.py +++ b/tools/binman/bsection.py @@ -301,3 +301,12 @@ class Section(object): def GetEntries(self): return self._entries + + def WriteMap(self, fd, indent): + """Write a map of the section to a .map file + + Args: + fd: File to write the map to + """ + for entry in self._entries.values(): + entry.WriteMap(fd, indent) diff --git a/tools/binman/cmdline.py b/tools/binman/cmdline.py index e9e0434ab3..bf63919eb7 100644 --- a/tools/binman/cmdline.py +++ b/tools/binman/cmdline.py @@ -30,6 +30,8 @@ def ParseArgs(argv): help='Add a path to a directory to use for input files') parser.add_option('-H', '--full-help', action='store_true', default=False, help='Display the README file') + parser.add_option('-m', '--map', action='store_true', + default=False, help='Output a map file for each image') parser.add_option('-O', '--outdir', type='string', action='store', help='Path to directory to use for intermediate and ' 'output files') diff --git a/tools/binman/control.py b/tools/binman/control.py index bc8ed8e37a..9243472906 100644 --- a/tools/binman/control.py +++ b/tools/binman/control.py @@ -112,6 +112,8 @@ def Binman(options, args): image.ProcessEntryContents() image.WriteSymbols() image.BuildImage() + if options.map: + image.WriteMap() finally: tools.FinaliseOutputDir() finally: diff --git a/tools/binman/entry.py b/tools/binman/entry.py index 8b46fbb5fa..3811d33e42 100644 --- a/tools/binman/entry.py +++ b/tools/binman/entry.py @@ -4,6 +4,8 @@ # Base class for all entries # +from __future__ import print_function + # importlib was introduced in Python 2.7 but there was a report of it not # working in 2.7.12, so we work around this: # http://lists.denx.de/pipermail/u-boot/2016-October/269729.html @@ -50,6 +52,7 @@ class Entry(object): self.section = section self.etype = etype self._node = node + self.name = node and node.name or 'none' self.pos = None self.size = None self.contents_size = 0 @@ -229,3 +232,13 @@ class Entry(object): this function and raise if there is a problem. """ pass + + def WriteMap(self, fd, indent): + """Write a map of the entry to a .map file + + Args: + fd: File to write the map to + indent: Curent indent level of map (0=none, 1=one level, etc.) + """ + print('%s%08x %08x %s' % (' ' * indent, self.pos, self.size, + self.name), file=fd) diff --git a/tools/binman/etype/section.py b/tools/binman/etype/section.py index 4e2f686eea..139fcad51a 100644 --- a/tools/binman/etype/section.py +++ b/tools/binman/etype/section.py @@ -48,3 +48,12 @@ class Entry_section(Entry): def CheckPosition(self): self._section.CheckEntries() + + def WriteMap(self, fd, indent): + """Write a map of the section to a .map file + + Args: + fd: File to write the map to + """ + super(Entry_section, self).WriteMap(fd, indent) + self._section.WriteMap(fd, indent + 1) diff --git a/tools/binman/ftest.py b/tools/binman/ftest.py index 9e12df5d79..61bbb53f8c 100644 --- a/tools/binman/ftest.py +++ b/tools/binman/ftest.py @@ -146,16 +146,19 @@ class TestFunctional(unittest.TestCase): # options.verbosity = tout.DEBUG return control.Binman(options, args) - def _DoTestFile(self, fname, debug=False): + def _DoTestFile(self, fname, debug=False, map=False): """Run binman with a given test file Args: fname: Device-tree source filename to use (e.g. 05_simple.dts) debug: True to enable debugging output + map: True to output map files for the images """ args = ['-p', '-I', self._indir, '-d', self.TestFile(fname)] if debug: args.append('-D') + if map: + args.append('-m') return self._DoBinman(*args) def _SetupDtb(self, fname, outfile='u-boot.dtb'): @@ -180,7 +183,7 @@ class TestFunctional(unittest.TestCase): TestFunctional._MakeInputFile(outfile, data) return data - def _DoReadFileDtb(self, fname, use_real_dtb=False): + def _DoReadFileDtb(self, fname, use_real_dtb=False, map=False): """Run binman and return the resulting image This runs binman with a given test file and then reads the resulting @@ -195,11 +198,13 @@ class TestFunctional(unittest.TestCase): the u-boot-dtb entry. Normally this is not needed and the test contents (the U_BOOT_DTB_DATA string) can be used. But in some test we need the real contents. + map: True to output map files for the images Returns: Tuple: Resulting image contents Device tree contents + Map data showing contents of image (or None if none) """ dtb_data = None # Use the compiled test file as the u-boot-dtb input @@ -207,15 +212,21 @@ class TestFunctional(unittest.TestCase): dtb_data = self._SetupDtb(fname) try: - retcode = self._DoTestFile(fname) + retcode = self._DoTestFile(fname, map=map) self.assertEqual(0, retcode) # Find the (only) image, read it and return its contents image = control.images['image'] fname = tools.GetOutputFilename('image.bin') self.assertTrue(os.path.exists(fname)) + if map: + map_fname = tools.GetOutputFilename('image.map') + with open(map_fname) as fd: + map_data = fd.read() + else: + map_data = None with open(fname) as fd: - return fd.read(), dtb_data + return fd.read(), dtb_data, map_data finally: # Put the test file back if use_real_dtb: @@ -815,7 +826,7 @@ class TestFunctional(unittest.TestCase): """Test that we can cope with an image without microcode (e.g. qemu)""" with open(self.TestFile('u_boot_no_ucode_ptr')) as fd: TestFunctional._MakeInputFile('u-boot', fd.read()) - data, dtb = self._DoReadFileDtb('44_x86_optional_ucode.dts', True) + data, dtb, _ = self._DoReadFileDtb('44_x86_optional_ucode.dts', True) # Now check the device tree has no microcode self.assertEqual(U_BOOT_NODTB_DATA, data[:len(U_BOOT_NODTB_DATA)]) @@ -929,5 +940,15 @@ class TestFunctional(unittest.TestCase): expected = U_BOOT_DATA + '!' * 12 + U_BOOT_DATA + 'a' * 12 + '&' * 8 self.assertEqual(expected, data) + def testMap(self): + """Tests outputting a map of the images""" + _, _, map_data = self._DoReadFileDtb('55_sections.dts', map=True) + self.assertEqual('''Position Size Name +00000000 00000010 section@0 + 00000000 00000004 u-boot +00000010 00000010 section@1 + 00000000 00000004 u-boot +''', map_data) + if __name__ == "__main__": unittest.main() diff --git a/tools/binman/image.py b/tools/binman/image.py index 74bc46fd30..835b66c99f 100644 --- a/tools/binman/image.py +++ b/tools/binman/image.py @@ -98,3 +98,11 @@ class Image: def GetEntries(self): return self._section.GetEntries() + + def WriteMap(self): + """Write a map of the image to a .map file""" + filename = '%s.map' % self._name + fname = tools.GetOutputFilename(filename) + with open(fname, 'w') as fd: + print('%8s %8s %s' % ('Position', 'Size', 'Name'), file=fd) + self._section.WriteMap(fd, 0) -- 2.39.5