From 3c945542dad99b1ec4a324ad6b69b8de8829827b Mon Sep 17 00:00:00 2001 From: Xiangfu Liu Date: Wed, 12 Oct 2011 12:24:06 +0800 Subject: [PATCH] MIPS: Jz4740: Add qi_lb60 board support Add support for the qi_lb60 (a.k.a QI Ben NanoNote) clamshell device from Qi hardware: http://en.qi-hardware.com/wiki/Ben_NanoNote http://en.qi-hardware.com/wiki/Main_Page http://en.wikipedia.org/wiki/Qi_hardware This Jz4740-based clamshell device does not use NOR flash to boot. The initial bring-up assumes that U-Boot is directly loaded into SDRAM using USB boot tool, and starts from 0x80100000. About USB boot tool ------------------- Jz4740 is one of the XBurst processors with USB boot functionality supported. The CPU can boot from a small ROM in the LSI, initialize CPU and USB module, then wait for USB commands from the USB host. We can send 8 KB binary data to the CPU cache using USB boot tool. USB boot tool is available to the public at Ingenic website. Also there is an alternative Debian package named xburst-tools. Signed-off-by: Xiangfu Liu Acked-by: Daniel Signed-off-by: Shinya Kuribayashi --- MAINTAINERS | 4 + MAKEALL | 4 +- board/qi/qi_lb60/Makefile | 45 ++++++++ board/qi/qi_lb60/config.mk | 31 ++++++ board/qi/qi_lb60/qi_lb60.c | 104 ++++++++++++++++++ board/qi/qi_lb60/u-boot.lds | 61 +++++++++++ boards.cfg | 1 + include/configs/qi_lb60.h | 211 ++++++++++++++++++++++++++++++++++++ 8 files changed, 460 insertions(+), 1 deletion(-) create mode 100644 board/qi/qi_lb60/Makefile create mode 100644 board/qi/qi_lb60/config.mk create mode 100644 board/qi/qi_lb60/qi_lb60.c create mode 100644 board/qi/qi_lb60/u-boot.lds create mode 100644 include/configs/qi_lb60.h diff --git a/MAINTAINERS b/MAINTAINERS index 3ab38fa984..bb95e6df93 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -928,6 +928,10 @@ Stefan Roese vct_xxx MIPS32 4Kc +Xiangfu Liu + + qi_lb60 MIPS32 (XBurst Jz4740 SoC) + ######################################################################### # Nios-II Systems: # # # diff --git a/MAKEALL b/MAKEALL index 52bc355c93..f582f8be15 100755 --- a/MAKEALL +++ b/MAKEALL @@ -400,7 +400,9 @@ LIST_mips=" \ ## MIPS Systems (little endian) ######################################################################### -LIST_mips4kc_el="" +LIST_mips4kc_el=" \ + qi_lb60 \ +" LIST_mips5kc_el="" diff --git a/board/qi/qi_lb60/Makefile b/board/qi/qi_lb60/Makefile new file mode 100644 index 0000000000..2f5b4be2be --- /dev/null +++ b/board/qi/qi_lb60/Makefile @@ -0,0 +1,45 @@ +# +# (C) Copyright 2006 +# Ingenic Semiconductor, +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).o + +COBJS := $(BOARD).o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(call cmd_link_o_target, $(OBJS)) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/qi/qi_lb60/config.mk b/board/qi/qi_lb60/config.mk new file mode 100644 index 0000000000..858e6a2f9d --- /dev/null +++ b/board/qi/qi_lb60/config.mk @@ -0,0 +1,31 @@ +# +# (C) Copyright 2006 Qi Hardware, Inc. +# Author: Xiangfu Liu +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +# +# Qi Hardware, Inc. Ben NanoNote (QI_LB60) +# + +ifndef TEXT_BASE +# ROM version +# TEXT_BASE = 0x88000000 + +# RAM version +TEXT_BASE = 0x80100000 +endif diff --git a/board/qi/qi_lb60/qi_lb60.c b/board/qi/qi_lb60/qi_lb60.c new file mode 100644 index 0000000000..3583d01c76 --- /dev/null +++ b/board/qi/qi_lb60/qi_lb60.c @@ -0,0 +1,104 @@ +/* + * Authors: Xiangfu Liu + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 3 of the License, or (at your option) any later version. + */ + +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +static void gpio_init(void) +{ + unsigned int i; + + /* Initialize NAND Flash Pins */ + __gpio_as_nand(); + + /* Initialize SDRAM pins */ + __gpio_as_sdram_16bit_4720(); + + /* Initialize LCD pins */ + __gpio_as_lcd_18bit(); + + /* Initialize MSC pins */ + __gpio_as_msc(); + + /* Initialize Other pins */ + for (i = 0; i < 7; i++) { + __gpio_as_input(GPIO_KEYIN_BASE + i); + __gpio_enable_pull(GPIO_KEYIN_BASE + i); + } + + for (i = 0; i < 8; i++) { + __gpio_as_output(GPIO_KEYOUT_BASE + i); + __gpio_clear_pin(GPIO_KEYOUT_BASE + i); + } + + __gpio_as_input(GPIO_KEYIN_8); + __gpio_enable_pull(GPIO_KEYIN_8); + + /* enable the TP4, TP5 as UART0 */ + __gpio_jtag_to_uart0(); + + __gpio_as_output(GPIO_AUDIO_POP); + __gpio_set_pin(GPIO_AUDIO_POP); + + __gpio_as_output(GPIO_LCD_CS); + __gpio_clear_pin(GPIO_LCD_CS); + + __gpio_as_output(GPIO_AMP_EN); + __gpio_clear_pin(GPIO_AMP_EN); + + __gpio_as_output(GPIO_SDPW_EN); + __gpio_disable_pull(GPIO_SDPW_EN); + __gpio_clear_pin(GPIO_SDPW_EN); + + __gpio_as_input(GPIO_SD_DETECT); + __gpio_disable_pull(GPIO_SD_DETECT); + + __gpio_as_input(GPIO_USB_DETECT); + __gpio_enable_pull(GPIO_USB_DETECT); +} + +static void cpm_init(void) +{ + struct jz4740_cpm *cpm = (struct jz4740_cpm *)JZ4740_CPM_BASE; + uint32_t reg = readw(&cpm->clkgr); + + reg |= CPM_CLKGR_IPU | + CPM_CLKGR_CIM | + CPM_CLKGR_I2C | + CPM_CLKGR_SSI | + CPM_CLKGR_UART1 | + CPM_CLKGR_SADC | + CPM_CLKGR_UHC | + CPM_CLKGR_UDC | + CPM_CLKGR_AIC1; + + writew(reg, &cpm->clkgr); +} + +int board_early_init_f(void) +{ + gpio_init(); + cpm_init(); + calc_clocks(); /* calc the clocks */ + rtc_init(); /* init rtc on any reset */ + + return 0; +} + +/* U-Boot common routines */ +int checkboard(void) +{ + printf("Board: Qi LB60 (Ingenic XBurst Jz4740 SoC, Speed %ld MHz)\n", + gd->cpu_clk / 1000000); + + return 0; +} diff --git a/board/qi/qi_lb60/u-boot.lds b/board/qi/qi_lb60/u-boot.lds new file mode 100644 index 0000000000..7317652569 --- /dev/null +++ b/board/qi/qi_lb60/u-boot.lds @@ -0,0 +1,61 @@ +/* + * (C) Copyright 2006 + * Ingenic Semiconductor, + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-tradlittlemips", "elf32-tradlittlemips", "elf32-tradlittlemips") + +OUTPUT_ARCH(mips) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + + . = ALIGN(4); + .text : + { + *(.text*) + } + + . = ALIGN(4); + .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) } + + . = ALIGN(4); + .data : { *(.data*) } + + . = .; + _gp = ALIGN(16) + 0x7ff0; + + __got_start = .; + .got : { *(.got) } + __got_end = .; + + .sdata : { *(.sdata*) } + + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + uboot_end_data = .; + num_got_entries = (__got_end - __got_start) >> 2; + + . = ALIGN(4); + .sbss : { *(.sbss*) } + .bss : { *(.bss*) . = ALIGN(4); } + uboot_end = .; +} diff --git a/boards.cfg b/boards.cfg index 65482aca1f..d3d610d691 100644 --- a/boards.cfg +++ b/boards.cfg @@ -302,6 +302,7 @@ vct_platinumavc mips mips32 vct microna vct_platinumavc_small mips mips32 vct micronas - vct:VCT_PLATINUMAVC,VCT_SMALL_IMAGE vct_platinumavc_onenand mips mips32 vct micronas - vct:VCT_PLATINUMAVC,VCT_ONENAND vct_platinumavc_onenand_small mips mips32 vct micronas - vct:VCT_PLATINUMAVC,VCT_ONENAND,VCT_SMALL_IMAGE +qi_lb60 mips xburst qi_lb60 qi nios2-generic nios2 nios2 nios2-generic altera PCI5441 nios2 nios2 pci5441 psyent PK1C20 nios2 nios2 pk1c20 psyent diff --git a/include/configs/qi_lb60.h b/include/configs/qi_lb60.h new file mode 100644 index 0000000000..f989595d0e --- /dev/null +++ b/include/configs/qi_lb60.h @@ -0,0 +1,211 @@ +/* + * Authors: Xiangfu Liu + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 3 of the License, or (at your option) any later version. + */ + +#ifndef __CONFIG_QI_LB60_H +#define __CONFIG_QI_LB60_H + +#define CONFIG_MIPS32 /* MIPS32 CPU core */ +#define CONFIG_JZSOC /* Jz SoC */ +#define CONFIG_JZ4740 /* Jz4740 SoC */ +#define CONFIG_NAND_JZ4740 + +#define CONFIG_SYS_CPU_SPEED 336000000 /* CPU clock: 336 MHz */ +#define CONFIG_SYS_EXTAL 12000000 /* EXTAL freq: 12 MHz */ +#define CONFIG_SYS_HZ (CONFIG_SYS_EXTAL / 256) /* incrementer freq */ +#define CONFIG_SYS_MIPS_TIMER_FREQ CONFIG_SYS_CPU_SPEED + +#define CONFIG_SYS_UART_BASE JZ4740_UART0_BASE /* Base of the UART channel */ +#define CONFIG_BAUDRATE 57600 +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +#define CONFIG_SKIP_LOWLEVEL_INIT +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_SYS_NO_FLASH +#define CONFIG_SYS_FLASH_BASE 0 /* init flash_base as 0 */ +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAUL) +#define CONFIG_BOOTDELAY 0 +#define CONFIG_BOOTARGS "mem=32M console=tty0 console=ttyS0,57600n8 ubi.mtd=2 rootfstype=ubifs root=ubi0:rootfs rw rootwait" +#define CONFIG_BOOTCOMMAND "nand read 0x80600000 0x400000 0x200000;bootm" + +/* + * Command line configuration. + */ +#define CONFIG_CMD_BOOTD /* bootd */ +#define CONFIG_CMD_CONSOLE /* coninfo */ +#define CONFIG_CMD_ECHO /* echo arguments */ + +#define CONFIG_CMD_LOADB /* loadb */ +#define CONFIG_CMD_LOADS /* loads */ +#define CONFIG_CMD_MEMORY /* md mm nm mw cp cmp crc base loop mtest */ +#define CONFIG_CMD_MISC /* Misc functions like sleep etc*/ +#define CONFIG_CMD_RUN /* run command in env variable */ +#define CONFIG_CMD_SAVEENV /* saveenv */ +#define CONFIG_CMD_SETGETDCR /* DCR support on 4xx */ +#define CONFIG_CMD_SOURCE /* "source" command support */ +#define CONFIG_CMD_NAND + +/* + * Serial download configuration + */ +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_LONGHELP +#define CONFIG_SYS_PROMPT "NanoNote# " +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) + +#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) +#define CONFIG_SYS_BOOTPARAMS_LEN (128 * 1024) + +#define CONFIG_SYS_SDRAM_BASE 0x80000000 /* Cached addr */ +#define CONFIG_SYS_INIT_SP_OFFSET 0x400000 +#define CONFIG_SYS_LOAD_ADDR 0x80600000 +#define CONFIG_SYS_MEMTEST_START 0x80100000 +#define CONFIG_SYS_MEMTEST_END 0x80800000 + +/* + * Environment + */ +#define CONFIG_ENV_IS_IN_NAND /* use NAND for environment vars */ + +#define CONFIG_SYS_NAND_5_ADDR_CYCLE +/* + * if board nand flash is 1GB, set to 1 + * if board nand flash is 2GB, set to 2 + * for change the PAGE_SIZE and BLOCK_SIZE + * will delete when there is no 1GB flash + */ +#define NANONOTE_NAND_SIZE 2 + +#define CONFIG_SYS_NAND_PAGE_SIZE (2048 * NANONOTE_NAND_SIZE) +#define CONFIG_SYS_NAND_BLOCK_SIZE (256 * NANONOTE_NAND_SIZE << 10) +/* nand bad block was marked at this page in a block, start from 0 */ +#define CONFIG_SYS_NAND_BADBLOCK_PAGE 127 +#define CONFIG_SYS_NAND_PAGE_COUNT 128 +#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0 +/* ECC offset position in oob area, default value is 6 if it isn't defined */ +#define CONFIG_SYS_NAND_ECC_POS (6 * NANONOTE_NAND_SIZE) +#define CONFIG_SYS_NAND_ECCSIZE 512 +#define CONFIG_SYS_NAND_ECCBYTES 9 +#define CONFIG_SYS_NAND_ECCSTEPS \ + (CONFIG_SYS_NAND_PAGE_SIZE / CONFIG_SYS_NAND_ECCSIZE) +#define CONFIG_SYS_NAND_ECCTOTAL \ + (CONFIG_SYS_NAND_ECCBYTES * CONFIG_SYS_NAND_ECCSTEPS) +#define CONFIG_SYS_NAND_ECCPOS \ + {12, 13, 14, 15, 16, 17, 18, 19,\ + 20, 21, 22, 23, 24, 25, 26, 27, \ + 28, 29, 30, 31, 32, 33, 34, 35, \ + 36, 37, 38, 39, 40, 41, 42, 43, \ + 44, 45, 46, 47, 48, 49, 50, 51, \ + 52, 53, 54, 55, 56, 57, 58, 59, \ + 60, 61, 62, 63, 64, 65, 66, 67, \ + 68, 69, 70, 71, 72, 73, 74, 75, \ + 76, 77, 78, 79, 80, 81, 82, 83} + +#define CONFIG_SYS_NAND_OOBSIZE 128 +#define CONFIG_SYS_NAND_BASE 0xB8000000 +#define CONFIG_SYS_ONENAND_BASE CONFIG_SYS_NAND_BASE +#define NAND_MAX_CHIPS 1 +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_SELECT_DEVICE 1 /* nand driver supports mutipl.*/ +#define CONFIG_NAND_SPL_TEXT_BASE 0x80000000 + +/* + * IPL (Initial Program Loader, integrated inside CPU) + * Will load first 8k from NAND (SPL) into cache and execute it from there. + * + * SPL (Secondary Program Loader) + * Will load special U-Boot version (NUB) from NAND and execute it. This SPL + * has to fit into 8kByte. It sets up the CPU and configures the SDRAM + * controller and the NAND controller so that the special U-Boot image can be + * loaded from NAND to SDRAM. + * + * NUB (NAND U-Boot) + * This NAND U-Boot (NUB) is a special U-Boot version which can be started + * from RAM. Therefore it mustn't (re-)configure the SDRAM controller. + * + */ +#define CONFIG_SYS_NAND_U_BOOT_DST 0x80100000 /* Load NUB to this addr */ +#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST +/* Start NUB from this addr*/ + +/* + * Define the partitioning of the NAND chip (only RAM U-Boot is needed here) + */ +#define CONFIG_SYS_NAND_U_BOOT_OFFS (256 << 10) /* Offset to RAM U-Boot image */ +#define CONFIG_SYS_NAND_U_BOOT_SIZE (512 << 10) /* Size of RAM U-Boot image */ + +#define CONFIG_ENV_SIZE (4 << 10) +#define CONFIG_ENV_OFFSET \ + (CONFIG_SYS_NAND_BLOCK_SIZE + CONFIG_SYS_NAND_U_BOOT_SIZE) +#define CONFIG_ENV_OFFSET_REDUND \ + (CONFIG_ENV_OFFSET + CONFIG_SYS_NAND_BLOCK_SIZE) + +#define CONFIG_SYS_TEXT_BASE 0x80100000 +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE + +/* + * SDRAM Info. + */ +#define CONFIG_NR_DRAM_BANKS 1 + +/* + * Cache Configuration + */ +#define CONFIG_SYS_DCACHE_SIZE 16384 +#define CONFIG_SYS_ICACHE_SIZE 16384 +#define CONFIG_SYS_CACHELINE_SIZE 32 + +/* + * GPIO definition + */ +#define GPIO_LCD_CS (2 * 32 + 21) +#define GPIO_AMP_EN (3 * 32 + 4) + +#define GPIO_SDPW_EN (3 * 32 + 2) +#define GPIO_SD_DETECT (3 * 32 + 0) + +#define GPIO_BUZZ_PWM (3 * 32 + 27) +#define GPIO_USB_DETECT (3 * 32 + 28) + +#define GPIO_AUDIO_POP (1 * 32 + 29) +#define GPIO_COB_TEST (1 * 32 + 30) + +#define GPIO_KEYOUT_BASE (2 * 32 + 10) +#define GPIO_KEYIN_BASE (3 * 32 + 18) +#define GPIO_KEYIN_8 (3 * 32 + 26) + +#define GPIO_SD_CD_N GPIO_SD_DETECT /* SD Card insert detect */ +#define GPIO_SD_VCC_EN_N GPIO_SDPW_EN /* SD Card Power Enable */ + +#define SPEN GPIO_LCD_CS /* LCDCS :Serial command enable */ +#define SPDA (2 * 32 + 22) /* LCDSCL:Serial command clock input */ +#define SPCK (2 * 32 + 23) /* LCDSDA:Serial command data input */ + +/* SDRAM paramters */ +#define SDRAM_BW16 1 /* Data bus width: 0-32bit, 1-16bit */ +#define SDRAM_BANK4 1 /* Banks each chip: 0-2bank, 1-4bank */ +#define SDRAM_ROW 13 /* Row address: 11 to 13 */ +#define SDRAM_COL 9 /* Column address: 8 to 12 */ +#define SDRAM_CASL 2 /* CAS latency: 2 or 3 */ + +/* SDRAM Timings, unit: ns */ +#define SDRAM_TRAS 45 /* RAS# Active Time */ +#define SDRAM_RCD 20 /* RAS# to CAS# Delay */ +#define SDRAM_TPC 20 /* RAS# Precharge Time */ +#define SDRAM_TRWL 7 /* Write Latency Time */ +#define SDRAM_TREF 15625 /* Refresh period: 8192 cycles/64ms */ + +#endif -- 2.39.5