From 3da5981adc90e04185c972edb00187449ffc41a0 Mon Sep 17 00:00:00 2001
From: Kurt Zeilenga <kurt@openldap.org>
Date: Sat, 1 May 1999 22:11:02 +0000
Subject: [PATCH] Reorganize tree to better support multiple documents.

---
 doc/guide/LDAPwww.gif                         | Bin 2541 -> 0 bytes
 doc/guide/{ => admin}/config.sdf              |   8 +-
 .../{figure_2.gif => admin/config_local.gif}  | Bin
 .../{figure_5.gif => admin/config_repl.gif}   | Bin
 .../{figure_4.gif => admin/config_x500fe.gif} | Bin
 .../config_x500ref.gif}                       | Bin
 doc/guide/{ => admin}/dbtools.sdf             |   0
 doc/guide/{ => admin}/install.sdf             |   0
 doc/guide/{ => admin}/intro.sdf               |   2 +-
 .../{figure_1.gif => admin/intro_tree.gif}    | Bin
 doc/guide/admin/master.sdf                    |  31 +++
 doc/guide/{ => admin}/monitoringslapd.sdf     |   0
 doc/guide/{ => admin}/preamble.sdf            |   0
 doc/guide/{ => admin}/quickstart.sdf          |   0
 doc/guide/{ => admin}/referrals.sdf           |   0
 .../{figure_6.gif => admin/replication.gif}   | Bin
 doc/guide/{ => admin}/replication.sdf         |   2 +-
 doc/guide/{ => admin}/runningslapd.sdf        |   0
 doc/guide/{ => admin}/slapdconfig.sdf         |   0
 doc/guide/{ => admin}/title.sdf               |   0
 doc/guide/{ => admin}/tuning.sdf              |   0
 doc/guide/master.sdf                          |  30 ---
 doc/guide/release/autoconf-install.txt        | 183 ++++++++++++++++++
 doc/guide/release/autoconf.sdf                |   6 +
 doc/guide/{ => release}/copyright-plain.sdf   |   0
 doc/guide/{ => release}/copyright.sdf         |   0
 doc/guide/{ => release}/license-plain.sdf     |   0
 doc/guide/{ => release}/license.sdf           |   0
 28 files changed, 226 insertions(+), 36 deletions(-)
 delete mode 100644 doc/guide/LDAPwww.gif
 rename doc/guide/{ => admin}/config.sdf (86%)
 rename doc/guide/{figure_2.gif => admin/config_local.gif} (100%)
 rename doc/guide/{figure_5.gif => admin/config_repl.gif} (100%)
 rename doc/guide/{figure_4.gif => admin/config_x500fe.gif} (100%)
 rename doc/guide/{figure_3.gif => admin/config_x500ref.gif} (100%)
 rename doc/guide/{ => admin}/dbtools.sdf (100%)
 rename doc/guide/{ => admin}/install.sdf (100%)
 rename doc/guide/{ => admin}/intro.sdf (99%)
 rename doc/guide/{figure_1.gif => admin/intro_tree.gif} (100%)
 create mode 100644 doc/guide/admin/master.sdf
 rename doc/guide/{ => admin}/monitoringslapd.sdf (100%)
 rename doc/guide/{ => admin}/preamble.sdf (100%)
 rename doc/guide/{ => admin}/quickstart.sdf (100%)
 rename doc/guide/{ => admin}/referrals.sdf (100%)
 rename doc/guide/{figure_6.gif => admin/replication.gif} (100%)
 rename doc/guide/{ => admin}/replication.sdf (99%)
 rename doc/guide/{ => admin}/runningslapd.sdf (100%)
 rename doc/guide/{ => admin}/slapdconfig.sdf (100%)
 rename doc/guide/{ => admin}/title.sdf (100%)
 rename doc/guide/{ => admin}/tuning.sdf (100%)
 delete mode 100644 doc/guide/master.sdf
 create mode 100644 doc/guide/release/autoconf-install.txt
 create mode 100644 doc/guide/release/autoconf.sdf
 rename doc/guide/{ => release}/copyright-plain.sdf (100%)
 rename doc/guide/{ => release}/copyright.sdf (100%)
 rename doc/guide/{ => release}/license-plain.sdf (100%)
 rename doc/guide/{ => release}/license.sdf (100%)

diff --git a/doc/guide/LDAPwww.gif b/doc/guide/LDAPwww.gif
deleted file mode 100644
index b593bc983e33da5fc43bcf60d5c098ecca348ef1..0000000000000000000000000000000000000000
GIT binary patch
literal 0
HcmV?d00001

literal 2541
zcmbu)`9IT-1Hke3#+dnFj=5vYku!x)`0%OCCPQf|G|l;$`XEQH5ZX{55|N|ksO4(T
z<Q5-Bw7DAPD09zQ(aZ-Q6~2$p-|&6?{`}!(Yj@V%!W#u50Am24uB?E^S-V^$ki9+K
z<Kshv12dgNsPVC-;rFZVWZllqefS{t?$f7*`Lz1`1+TM9AC{HTYHBLW86{0kH60zT
z%}rg;YS<OcoJQt&XI~48#d_P@&EZV<zaN~K7#kg(n4Mi5<9?Z4<nb2fS604!`zH9j
zzPY)%y}P@&y>obY2>gE;{Kx-$0iXwfGgK8{OYcgA%IcBWwa?%D1=p}Iz`rW$O;t4U
zpJKl%W<5k=@2lF?mGoulT&f`T)s+rBKJiC?fn9ysP`-KC=c&H>7o2D4MA#Ag2F6G+
zK1<KNzoGoY3qrAdp?zb;Sml*^|LOk5%88ek^bHgN`i)N@Q9X*g{&o+jK7<E04@p?J
z7K+;R7#wJRNfnk<^MZGsOqzwu?CVJubm0adp&D=8z0AC4|Gsas5;u(E33W=z1h^E?
zO}an~r-zD2zEHpe4KV(xy9+b9U&QFD>JS$Y8H~5t-S~pE>6)lfVd(HD7n0e2!Q!e;
z^VOua7Rcus^Vo1OOV;v$d}_b8&4&-pG}GZf$86oNo0n&#@^RD_P@UA2W9Au*G|Fp^
z86_*xas_uFMz)5^>qNQ*NZdeDVBgM%tCRdsUdE6RlR3zQ*k4CM;P}iH0<2ic)gu}9
zE8F$YH4LL$M9!@NLsB}`fFhY*+eP8ds3lQ7lYY+zdCIpWyNaOe7{eK{)E6`8Bi3@B
zL<lb2o4B{PO1|T1Otub@(qcY_9_8ntv!Z{+`FJQ$!Zk>;y<-|UbyXyVD1=9kKsUM&
z=x6^pYj))V@JT|3<jI)fC-~olbv>Zaf3!VTPcAah3rkA?K3VUWlaN45&NYB+7kM39
zGjhuH`60AW4^FP%i*|j|y@qhgi!E;%hQ#)kgKI--K5Aoi7Al-bwWq@qszeLz^#d)A
zlM5?-y%h`#!(PWQt68Bh46ydfUetUiJ+^CUT6%tdn|vHFktDb7H!k|BJ4dhS-{WMX
zrfYsz38V?1w$E+z2{b;o?|3ZyWwuOsImpHzW`xOi#8nWpolFgZB4te?ATw-c-35fx
zhC6+a)P5GxsWhk~AD7BL77z0+*y<Id(G+|P1>0OSVIg9p$SUA*11{M`WhDK|aw-o)
zc)VnaQJK)@qd8p&0W&ntp|LR6(7ox6BqESfd!4sb36uEZe{xbpX?e}|2YC1!?m!^W
zjR+j_`8_x;QGc|Nc;`j?E++a`Y{t7l6|{7ZNNirlbW}AlgA)aksF}hje35RD%XG|G
z<K`h+V36QILYHeL<uyiTRmCENj+HZOgU015WI>L!D!mVvHPtOsACk-z^vfnOs=b=0
z2+d)o9`e{Yjdb`TH$N?81G2r{gudx;+U#GEn;sVUA<G`CLh-Sn+>gS}akb^~oT|UA
zIo*dXyNCKSdxN(!9OrvO*LbNZuaBXn861GNfd8Q^=-AiNyq#jqW~mvsiNQ*ur^J!p
zC!MW?=6$I`C+EJOwq+iYnMu)@`Lk9n88DAv)IRSKMj%qlz9I$49sD!9>t>z__qjn@
z;u1aHn&GzCA@{7SF3E{nV@J1#ozMJI1bHLML|xPj$}>sk^TEY4n~<o?FX=1jN6o!9
z!imn0rse7t|JMIbxMNl|ubQKcUP#M8Wn<@-<rr|py-ez~(j*=p(fJp_$RT``C%^P3
z%W_;g`4^D4LhDCX661X4TN6%nHbY6+d=4C-YBvtdnWw~l4S2!jX>BI=J-F<Ydv<YA
zU7@H03QM|D^ozW1%14>cBLPPZ!ZZ-RN&|N9hvNoG%bL6OeHxJhWE+;<li&x;q+~oX
z^d85BKCyN4;Y6~ism2ZpLsAQMd86%Rn0`n<m5`nvRetzH!B<8vEl2OBa)S82h@joK
zG3(LNsFwMs28X06S=5pb_vO*M?7KBdF^wd(hkUc41ZH~VY7g7cvLb=xR{wmq>bh0t
zL<WyIT7qnq0g!ueT;E{9BLjyycDdPAwaZz8_G#=ndIwfUIBYtJ-E*<^VyZ{Dzht>G
zpsYKTlwf+t(qPKwtp8Zq!n^XWtyCk(f@M2C8^tt5D<Rxu)vPa|E|%(|WxGE_Q~-%%
z0c>cx#lX1^69xh?a!Oae^_6x{DYZI<w2XDdl@7kVmQo1YQGTCj9tl*|(;}AhK0K(4
zFymRviu6w^#L46C&V;jj$j}cNs*ZF7Q!?U!kZZ`!yGy>U(#7(xgy%LIG?BPWFu9+2
z7eGA2;etFmis6b+8&Q6U64yZMPxfHuDYu4VvREj1cBi&QbzM(AvvSz0NE)?dQe{o*
z?-@@gH-Gf^y$)(}Pc)bJni~qf)JmM04=F?a@l)Jp^w!K~!nRfr=p*QBUJHz!jjg$a
zudH>ZtcQ-(AM3q-XCJKCb;21XT!yElxm}DZD*4R{=MeWM)$Yl<J|JGh7L&|r#u!p6
zzW2SlU{}FY6I!C3mK2<)7%UzgNMfIL3^kXkSk$f;?lVB4ZMD&GJ<B~Ef=5cWc%3gI
z{1Zxz&qQ~t%1G)^0N5PUrsKc>4sM|V(nt_Sjt(TW(?D8Y4!O?V*Nmh}IO4DB(8BA|
z@Hrwx(+hwayk9XaW)4QXV8j$dR!@od48~j&I6&zjv(&vIdaf}@hq8?S5slOu1}dE6
z{K0hkSYZ5i?sda}M4cGqy&#ivgqJ^*PJCCe(@@%a4lad5Bjx4*Q62uuwc^PMcydGb
zF{H1j2{7zh0|oV*OCVZu2Yi+Rp^j>>wYV}^hfe`tmH<)dSEs*5-g-Szoe(L@eHSRX
z+u{tT+B~Me<DPA3{<eMtLI)rbYE2?v4Ktt&nh<NJE^n{eU(U;tE4wCOUKqN0BmXv1
z8E-0vJaHIGO)3Cs7`4J2pN8JcQW<|E8NvE1EjV_?4br?*m+yXh>uH!OFCen%ZKuSa
z677?Vwyq%PiSr<d+L*P7pzj}O8{t=t+>mDK-#NEuR(;g-Cxe@en;L7jtAz@Wk{>rU
zcve%B!+!D@j`i=?4E<UYDI13_Thqiif9!z8i0iHGehoE{%O%=Zk+r(lTR)f5q}up;
z6!Re^`f|{-BN}eIlzeA;w38=y>FN%1%;HQ;o-F!ZnQa`)dDhpYIC{b3zzTDevTT!e
zWHc~7tRQD2GM;-dqj3z~;CB!VCj1a+w??&APRT6IYL2jtQnq}J_h~J(i4ji6PBUkJ
hL-F?Ek2$H%e_0m}1o?+QS1)vapWqy<iwXml{{w_Ts9*p9

diff --git a/doc/guide/config.sdf b/doc/guide/admin/config.sdf
similarity index 86%
rename from doc/guide/config.sdf
rename to doc/guide/admin/config.sdf
index 2d7399fbc4..c91acf56c0 100644
--- a/doc/guide/config.sdf
+++ b/doc/guide/admin/config.sdf
@@ -14,7 +14,7 @@ In this configuration, you run a {{I:slapd}} which provides directory service
 for your local domain only. It does not interact with other directory
 servers in any way. This configuration is shown in Figure 2.
 
-!import "figure_2.gif"; align="center"; title="Local service via slapd configuration"
+!import "config_local.gif"; align="center"; title="Local service via slapd configuration"
 FT: Figure 2: Local service via slapd configuration.
 
 Use this configuration if you are just starting out (it's the one the
@@ -32,7 +32,7 @@ X.500 world (you don't have to run the ldapd yourself - you can just
 point to somebody else who does and doesn't mind you pointing to
 their service). This configuration is shown in Figure 3.
 
-!import "figure_3.gif"; align="center"; title="Local service via slapd + X.500 referrals configuration"
+!import "config_x500ref.gif"; align="center"; title="Local service via slapd + X.500 referrals configuration"
 FT: Figure 3: Local service via slapd + X.500 referrals configuration
 
 Use this configuration if you want to provide local service but still want
@@ -50,7 +50,7 @@ rest of the X.500 world. LDAP clients gain access to the directory
 through an ldapd which runs at your site. This configuration is shown
 in Figure 4.
 
-!import "figure_4.gif"; align="center"; title="Local service via X.500 and ldapd configuration"
+!import "config_x500fe.gif"; align="center"; title="Local service via X.500 and ldapd configuration"
 FT: Figure 4: Local service via X.500 and ldapd configuration
 
 Use this configuration if you are already running an X.500 service.
@@ -65,7 +65,7 @@ The slurpd daemon is used to propagate changes from a master slapd
 to one or more slave slapds. An example master-slave configuration
 is shown in figure 5.
 
-!import "figure_5.gif"; align="center"; title="Master slapd with two slaves replicated with slurpd"
+!import "config_repl.gif"; align="center"; title="Master slapd with two slaves replicated with slurpd"
 FT: Figure 5: Master slapd with two slaves replicated with slurpd
 
 This configuration can be used in conjunction with the first two
diff --git a/doc/guide/figure_2.gif b/doc/guide/admin/config_local.gif
similarity index 100%
rename from doc/guide/figure_2.gif
rename to doc/guide/admin/config_local.gif
diff --git a/doc/guide/figure_5.gif b/doc/guide/admin/config_repl.gif
similarity index 100%
rename from doc/guide/figure_5.gif
rename to doc/guide/admin/config_repl.gif
diff --git a/doc/guide/figure_4.gif b/doc/guide/admin/config_x500fe.gif
similarity index 100%
rename from doc/guide/figure_4.gif
rename to doc/guide/admin/config_x500fe.gif
diff --git a/doc/guide/figure_3.gif b/doc/guide/admin/config_x500ref.gif
similarity index 100%
rename from doc/guide/figure_3.gif
rename to doc/guide/admin/config_x500ref.gif
diff --git a/doc/guide/dbtools.sdf b/doc/guide/admin/dbtools.sdf
similarity index 100%
rename from doc/guide/dbtools.sdf
rename to doc/guide/admin/dbtools.sdf
diff --git a/doc/guide/install.sdf b/doc/guide/admin/install.sdf
similarity index 100%
rename from doc/guide/install.sdf
rename to doc/guide/admin/install.sdf
diff --git a/doc/guide/intro.sdf b/doc/guide/admin/intro.sdf
similarity index 99%
rename from doc/guide/intro.sdf
rename to doc/guide/admin/intro.sdf
index 27da553be1..24dbcc54bd 100644
--- a/doc/guide/intro.sdf
+++ b/doc/guide/admin/intro.sdf
@@ -69,7 +69,7 @@ think of. Figure 1 shows an example LDAP directory tree, which should help
 make things clear.
 
 
-!import "figure_1.gif"; align="center"; title="An example LDAP directory tree"
+!import "intro_tree.gif"; align="center"; title="An example LDAP directory tree"
 FT: Figure 1: An example LDAP directory tree.
 
 
diff --git a/doc/guide/figure_1.gif b/doc/guide/admin/intro_tree.gif
similarity index 100%
rename from doc/guide/figure_1.gif
rename to doc/guide/admin/intro_tree.gif
diff --git a/doc/guide/admin/master.sdf b/doc/guide/admin/master.sdf
new file mode 100644
index 0000000000..9c85a69cc0
--- /dev/null
+++ b/doc/guide/admin/master.sdf
@@ -0,0 +1,31 @@
+# Copyright 1999, The OpenLDAP Foundation, All Rights Reserved.
+# COPYING RESTRICTIONS APPLY, see COPYRIGHT.
+#
+# SDF master file for the OpenLDAP Administrator's guide
+# master.sdf 
+
+# title information
+!include "title.sdf"
+
+# Document copyright, publishing info, acknowledgements, preface
+!include "preamble.sdf"; plain
+
+# Chapters
+!include "intro.sdf"; chapter
+!include "quickstart.sdf"; chapter
+!include "config.sdf"; chapter
+!include "install.sdf"; chapter
+!include "slapdconfig.sdf"; chapter
+!include "runningslapd.sdf"; chapter
+!include "monitoringslapd.sdf"; chapter
+!include "dbtools.sdf"; chapter
+!include "tuning.sdf"; chapter
+!include "referrals.sdf"; chapter
+!include "replication.sdf"; chapter
+
+# Appendices 
+!include "../release/autoconf.sdf"; appendix
+
+# Software Copyright/License
+!include "../release/copyright.sdf"; appendix
+!include "../release/license.sdf"; appendix
diff --git a/doc/guide/monitoringslapd.sdf b/doc/guide/admin/monitoringslapd.sdf
similarity index 100%
rename from doc/guide/monitoringslapd.sdf
rename to doc/guide/admin/monitoringslapd.sdf
diff --git a/doc/guide/preamble.sdf b/doc/guide/admin/preamble.sdf
similarity index 100%
rename from doc/guide/preamble.sdf
rename to doc/guide/admin/preamble.sdf
diff --git a/doc/guide/quickstart.sdf b/doc/guide/admin/quickstart.sdf
similarity index 100%
rename from doc/guide/quickstart.sdf
rename to doc/guide/admin/quickstart.sdf
diff --git a/doc/guide/referrals.sdf b/doc/guide/admin/referrals.sdf
similarity index 100%
rename from doc/guide/referrals.sdf
rename to doc/guide/admin/referrals.sdf
diff --git a/doc/guide/figure_6.gif b/doc/guide/admin/replication.gif
similarity index 100%
rename from doc/guide/figure_6.gif
rename to doc/guide/admin/replication.gif
diff --git a/doc/guide/replication.sdf b/doc/guide/admin/replication.sdf
similarity index 99%
rename from doc/guide/replication.sdf
rename to doc/guide/admin/replication.sdf
index a915227c7f..660536e7e9 100644
--- a/doc/guide/replication.sdf
+++ b/doc/guide/admin/replication.sdf
@@ -381,7 +381,7 @@ X.500 DSA, slurpd runs on the master slapd host, and
 sends changes to an ldapd which acts as a gateway to
 the X.500 DSA:
 
-!import "figure_1.gif"; align="center"; title="Replication from slapd to an X.500 DSA"
+!import "replication.gif"; align="center"; title="Replication from slapd to an X.500 DSA"
 FT: Figure 6: Replication from slapd to an X.500 DSA
 
 Note that the X.500 DSA must be a read-only copy. Since
diff --git a/doc/guide/runningslapd.sdf b/doc/guide/admin/runningslapd.sdf
similarity index 100%
rename from doc/guide/runningslapd.sdf
rename to doc/guide/admin/runningslapd.sdf
diff --git a/doc/guide/slapdconfig.sdf b/doc/guide/admin/slapdconfig.sdf
similarity index 100%
rename from doc/guide/slapdconfig.sdf
rename to doc/guide/admin/slapdconfig.sdf
diff --git a/doc/guide/title.sdf b/doc/guide/admin/title.sdf
similarity index 100%
rename from doc/guide/title.sdf
rename to doc/guide/admin/title.sdf
diff --git a/doc/guide/tuning.sdf b/doc/guide/admin/tuning.sdf
similarity index 100%
rename from doc/guide/tuning.sdf
rename to doc/guide/admin/tuning.sdf
diff --git a/doc/guide/master.sdf b/doc/guide/master.sdf
deleted file mode 100644
index 62471e9586..0000000000
--- a/doc/guide/master.sdf
+++ /dev/null
@@ -1,30 +0,0 @@
-# Copyright 1999, The OpenLDAP Foundation, All Rights Reserved.
-# COPYING RESTRICTIONS APPLY, see COPYRIGHT.
-#
-# master.sdf 
-# SDF master file for the OpenLDAP Administrator's guide
-
-# title information
-!include "title.sdf"
-
-# Document copyright, publishing info, acknowledgements, preface
-!include "preamble.sdf"; plain
-
-# Chapters
-!include "intro.sdf"
-!include "quickstart.sdf"
-!include "config.sdf"
-!include "install.sdf"
-!include "slapdconfig.sdf"
-!include "runningslapd.sdf"
-!include "monitoringslapd.sdf"
-!include "dbtools.sdf"
-!include "tuning.sdf"
-!include "referrals.sdf"
-!include "replication.sdf"
-
-# Appendices 
-
-# Software Copyright/License
-!include "copyright.sdf"; appendix
-!include "license.sdf"; appendix
diff --git a/doc/guide/release/autoconf-install.txt b/doc/guide/release/autoconf-install.txt
new file mode 100644
index 0000000000..50dbe439d0
--- /dev/null
+++ b/doc/guide/release/autoconf-install.txt
@@ -0,0 +1,183 @@
+Basic Installation
+==================
+
+   These are generic installation instructions.
+
+   The `configure' shell script attempts to guess correct values for
+various system-dependent variables used during compilation.  It uses
+those values to create a `Makefile' in each directory of the package.
+It may also create one or more `.h' files containing system-dependent
+definitions.  Finally, it creates a shell script `config.status' that
+you can run in the future to recreate the current configuration, a file
+`config.cache' that saves the results of its tests to speed up
+reconfiguring, and a file `config.log' containing compiler output
+(useful mainly for debugging `configure').
+
+   If you need to do unusual things to compile the package, please try
+to figure out how `configure' could check whether to do them, and mail
+diffs or instructions to the address given in the `README' so they can
+be considered for the next release.  If at some point `config.cache'
+contains results you don't want to keep, you may remove or edit it.
+
+   The file `configure.in' is used to create `configure' by a program
+called `autoconf'.  You only need `configure.in' if you want to change
+it or regenerate `configure' using a newer version of `autoconf'.
+
+The simplest way to compile this package is:
+
+  1. `cd' to the directory containing the package's source code and type
+     `./configure' to configure the package for your system.  If you're
+     using `csh' on an old version of System V, you might need to type
+     `sh ./configure' instead to prevent `csh' from trying to execute
+     `configure' itself.
+
+     Running `configure' takes awhile.  While running, it prints some
+     messages telling which features it is checking for.
+
+  2. Type `make' to compile the package.
+
+  3. Optionally, type `make check' to run any self-tests that come with
+     the package.
+
+  4. Type `make install' to install the programs and any data files and
+     documentation.
+
+  5. You can remove the program binaries and object files from the
+     source code directory by typing `make clean'.  To also remove the
+     files that `configure' created (so you can compile the package for
+     a different kind of computer), type `make distclean'.  There is
+     also a `make maintainer-clean' target, but that is intended mainly
+     for the package's developers.  If you use it, you may have to get
+     all sorts of other programs in order to regenerate files that came
+     with the distribution.
+
+Compilers and Options
+=====================
+
+   Some systems require unusual options for compilation or linking that
+the `configure' script does not know about.  You can give `configure'
+initial values for variables by setting them in the environment.  Using
+a Bourne-compatible shell, you can do that on the command line like
+this:
+     CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure
+
+Or on systems that have the `env' program, you can do it like this:
+     env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure
+
+Compiling For Multiple Architectures
+====================================
+
+   You can compile the package for more than one kind of computer at the
+same time, by placing the object files for each architecture in their
+own directory.  To do this, you must use a version of `make' that
+supports the `VPATH' variable, such as GNU `make'.  `cd' to the
+directory where you want the object files and executables to go and run
+the `configure' script.  `configure' automatically checks for the
+source code in the directory that `configure' is in and in `..'.
+
+   If you have to use a `make' that does not supports the `VPATH'
+variable, you have to compile the package for one architecture at a time
+in the source code directory.  After you have installed the package for
+one architecture, use `make distclean' before reconfiguring for another
+architecture.
+
+Installation Names
+==================
+
+   By default, `make install' will install the package's files in
+`/usr/local/bin', `/usr/local/man', etc.  You can specify an
+installation prefix other than `/usr/local' by giving `configure' the
+option `--prefix=PATH'.
+
+   You can specify separate installation prefixes for
+architecture-specific files and architecture-independent files.  If you
+give `configure' the option `--exec-prefix=PATH', the package will use
+PATH as the prefix for installing programs and libraries.
+Documentation and other data files will still use the regular prefix.
+
+   In addition, if you use an unusual directory layout you can give
+options like `--bindir=PATH' to specify different values for particular
+kinds of files.  Run `configure --help' for a list of the directories
+you can set and what kinds of files go in them.
+
+   If the package supports it, you can cause programs to be installed
+with an extra prefix or suffix on their names by giving `configure' the
+option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
+
+Optional Features
+=================
+
+   Some packages pay attention to `--enable-FEATURE' options to
+`configure', where FEATURE indicates an optional part of the package.
+They may also pay attention to `--with-PACKAGE' options, where PACKAGE
+is something like `gnu-as' or `x' (for the X Window System).  The
+`README' should mention any `--enable-' and `--with-' options that the
+package recognizes.
+
+   For packages that use the X Window System, `configure' can usually
+find the X include and library files automatically, but if it doesn't,
+you can use the `configure' options `--x-includes=DIR' and
+`--x-libraries=DIR' to specify their locations.
+
+Specifying the System Type
+==========================
+
+   There may be some features `configure' can not figure out
+automatically, but needs to determine by the type of host the package
+will run on.  Usually `configure' can figure that out, but if it prints
+a message saying it can not guess the host type, give it the
+`--host=TYPE' option.  TYPE can either be a short name for the system
+type, such as `sun4', or a canonical name with three fields:
+     CPU-COMPANY-SYSTEM
+
+See the file `config.sub' for the possible values of each field.  If
+`config.sub' isn't included in this package, then this package doesn't
+need to know the host type.
+
+   If you are building compiler tools for cross-compiling, you can also
+use the `--target=TYPE' option to select the type of system they will
+produce code for and the `--build=TYPE' option to select the type of
+system on which you are compiling the package.
+
+Sharing Defaults
+================
+
+   If you want to set default values for `configure' scripts to share,
+you can create a site shell script called `config.site' that gives
+default values for variables like `CC', `cache_file', and `prefix'.
+`configure' looks for `PREFIX/share/config.site' if it exists, then
+`PREFIX/etc/config.site' if it exists.  Or, you can set the
+`CONFIG_SITE' environment variable to the location of the site script.
+A warning: not all `configure' scripts look for a site script.
+
+Operation Controls
+==================
+
+   `configure' recognizes the following options to control how it
+operates.
+
+`--cache-file=FILE'
+     Use and save the results of the tests in FILE instead of
+     `./config.cache'.  Set FILE to `/dev/null' to disable caching, for
+     debugging `configure'.
+
+`--help'
+     Print a summary of the options to `configure', and exit.
+
+`--quiet'
+`--silent'
+`-q'
+     Do not print messages saying which checks are being made.  To
+     suppress all normal output, redirect it to `/dev/null' (any error
+     messages will still be shown).
+
+`--srcdir=DIR'
+     Look for the package's source code in directory DIR.  Usually
+     `configure' can determine that directory automatically.
+
+`--version'
+     Print the version of Autoconf used to generate the `configure'
+     script, and exit.
+
+`configure' also accepts some other, not widely useful, options.
+
diff --git a/doc/guide/release/autoconf.sdf b/doc/guide/release/autoconf.sdf
new file mode 100644
index 0000000000..f5c41f0cf1
--- /dev/null
+++ b/doc/guide/release/autoconf.sdf
@@ -0,0 +1,6 @@
+#
+# Generic Autoconf INSTALL
+#
+
+H1: General Configure Instructions
+!include "autoconf-install.txt" ; verbatim
diff --git a/doc/guide/copyright-plain.sdf b/doc/guide/release/copyright-plain.sdf
similarity index 100%
rename from doc/guide/copyright-plain.sdf
rename to doc/guide/release/copyright-plain.sdf
diff --git a/doc/guide/copyright.sdf b/doc/guide/release/copyright.sdf
similarity index 100%
rename from doc/guide/copyright.sdf
rename to doc/guide/release/copyright.sdf
diff --git a/doc/guide/license-plain.sdf b/doc/guide/release/license-plain.sdf
similarity index 100%
rename from doc/guide/license-plain.sdf
rename to doc/guide/release/license-plain.sdf
diff --git a/doc/guide/license.sdf b/doc/guide/release/license.sdf
similarity index 100%
rename from doc/guide/license.sdf
rename to doc/guide/release/license.sdf
-- 
2.39.5