From 3e3b956906eba9e4ad7931581ecedaad10eccce8 Mon Sep 17 00:00:00 2001 From: Peter Pearse Date: Fri, 18 May 2007 16:47:03 +0100 Subject: [PATCH] Reduce line lengths to 80 characters max. --- board/siemens/SMN42/flash.c | 3 ++- disk/part.c | 6 ++++-- drivers/enc28j60.c | 15 ++++++++++----- fs/fat/fat.c | 6 ++++-- include/configs/SMN42.h | 3 ++- include/configs/lpc2292sodimm.h | 4 +++- 6 files changed, 25 insertions(+), 12 deletions(-) mode change 100644 => 100755 board/siemens/SMN42/flash.c mode change 100644 => 100755 disk/part.c mode change 100644 => 100755 drivers/enc28j60.c mode change 100644 => 100755 fs/fat/fat.c mode change 100644 => 100755 include/configs/SMN42.h mode change 100644 => 100755 include/configs/lpc2292sodimm.h diff --git a/board/siemens/SMN42/flash.c b/board/siemens/SMN42/flash.c old mode 100644 new mode 100755 index 7d4977e026..e80df0bcf4 --- a/board/siemens/SMN42/flash.c +++ b/board/siemens/SMN42/flash.c @@ -25,7 +25,8 @@ #include #include -static unsigned long flash_addr_table[CFG_MAX_FLASH_BANKS] = CFG_FLASH_BANKS_LIST; +static unsigned long flash_addr_table[CFG_MAX_FLASH_BANKS] + = CFG_FLASH_BANKS_LIST; flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; extern int lpc2292_copy_buffer_to_flash(flash_info_t *, ulong); diff --git a/disk/part.c b/disk/part.c old mode 100644 new mode 100755 index 54de737c3b..61e6579d45 --- a/disk/part.c +++ b/disk/part.c @@ -220,7 +220,8 @@ void init_part (block_dev_desc_t * dev_desc) } -int get_partition_info (block_dev_desc_t *dev_desc, int part, disk_partition_t *info) +int get_partition_info (block_dev_desc_t *dev_desc, int part + , disk_partition_t *info) { switch (dev_desc->part_type) { #ifdef CONFIG_MAC_PARTITION @@ -326,7 +327,8 @@ void print_part (block_dev_desc_t * dev_desc) #else /* neither MAC nor DOS nor ISO partition configured */ -# error neither CONFIG_MAC_PARTITION nor CONFIG_DOS_PARTITION nor CONFIG_ISO_PARTITION configured! +# error neither CONFIG_MAC_PARTITION nor CONFIG_DOS_PARTITION +# error nor CONFIG_ISO_PARTITION configured! #endif #endif /* (CONFIG_COMMANDS & CFG_CMD_IDE) || CONFIG_COMMANDS & CFG_CMD_SCSI) */ diff --git a/drivers/enc28j60.c b/drivers/enc28j60.c old mode 100644 new mode 100755 index c2ed48573a..36b084c191 --- a/drivers/enc28j60.c +++ b/drivers/enc28j60.c @@ -548,7 +548,10 @@ static void encRx (void) m_nic_bfs (CTL_REG_ECON2, ENC_ECON2_PKTDEC); /* taken from the Linux driver */ - /* Only odd values should be written to ERXRDPTL, see errata B4 pt.13 */ rxbuf_rdpt = (next_pointer_msb << 8 | next_pointer_lsb) - 1; + /* Only odd values should be written to ERXRDPTL, + * see errata B4 pt.13 + */ + rxbuf_rdpt = (next_pointer_msb << 8 | next_pointer_lsb) - 1; if ((rxbuf_rdpt < (m_nic_read(CTL_REG_ERXSTH) << 8 | m_nic_read(CTL_REG_ERXSTL))) || (rxbuf_rdpt > (m_nic_read(CTL_REG_ERXNDH) << 8 | @@ -799,13 +802,15 @@ static void encInit (unsigned char *pEthAddr) /* enable MAC to receive frames */ /* added some bits from the Linux driver */ - m_nic_write_retry (CTL_REG_MACON1, (ENC_MACON1_MARXEN | ENC_MACON1_TXPAUS | ENC_MACON1_RXPAUS), 10); + m_nic_write_retry (CTL_REG_MACON1 + ,(ENC_MACON1_MARXEN | ENC_MACON1_TXPAUS | ENC_MACON1_RXPAUS) + ,10); /* configure pad, tx-crc and duplex */ /* added a bit from the Linux driver */ - m_nic_write_retry (CTL_REG_MACON3, - (ENC_MACON3_PADCFG0 | ENC_MACON3_TXCRCEN | ENC_MACON3_FRMLNEN), - 10); + m_nic_write_retry (CTL_REG_MACON3 + ,(ENC_MACON3_PADCFG0 | ENC_MACON3_TXCRCEN | ENC_MACON3_FRMLNEN) + ,10); /* added 4 new lines from the Linux driver */ /* Allow infinite deferals if the medium is continously busy */ diff --git a/fs/fat/fat.c b/fs/fat/fat.c old mode 100644 new mode 100755 index 084ee44459..3007608360 --- a/fs/fat/fat.c +++ b/fs/fat/fat.c @@ -59,7 +59,8 @@ int disk_read (__u32 startblock, __u32 getsize, __u8 * bufptr) if (cur_dev == NULL) return -1; if (cur_dev->block_read) { - return cur_dev->block_read (cur_dev->dev, startblock, getsize, (unsigned long *)bufptr); + return cur_dev->block_read (cur_dev->dev + , startblock, getsize, (unsigned long *)bufptr); } return -1; } @@ -996,7 +997,8 @@ file_fat_detectfs(void) memcpy (vol_label, volinfo.volume_label, 11); vol_label[11] = '\0'; volinfo.fs_type[5]='\0'; - printf("Partition %d: Filesystem: %s \"%s\"\n",cur_part,volinfo.fs_type,vol_label); + printf("Partition %d: Filesystem: %s \"%s\"\n" + ,cur_part,volinfo.fs_type,vol_label); return 0; } diff --git a/include/configs/SMN42.h b/include/configs/SMN42.h old mode 100644 new mode 100755 index 41330e9dbe..1d2f28d946 --- a/include/configs/SMN42.h +++ b/include/configs/SMN42.h @@ -134,7 +134,8 @@ #undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ -#define CFG_LOAD_ADDR 0x81000000 /* default load address for uClinux img is here*/ +#define CFG_LOAD_ADDR 0x81000000 /* default load address + * for uClinux img is here*/ #define CFG_SYS_CLK_FREQ 58982400 /* Hz */ #define CFG_HZ 2048 /* decrementer freq in Hz */ diff --git a/include/configs/lpc2292sodimm.h b/include/configs/lpc2292sodimm.h old mode 100644 new mode 100755 index d817ea8d73..30e0b10f79 --- a/include/configs/lpc2292sodimm.h +++ b/include/configs/lpc2292sodimm.h @@ -101,7 +101,9 @@ #undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ -#define CFG_LOAD_ADDR 0x00040000 /* default load address for armadillo: kernel img is here*/ +#define CFG_LOAD_ADDR 0x00040000 /* default load address for + * armadillo: kernel img is here + */ #define CFG_SYS_CLK_FREQ 58982400 /* Hz */ #define CFG_HZ 2048 /* decrementer freq in Hz */ -- 2.39.5