From 3e6f9e8d1e65c4da505ff78481d54a115520d3d1 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Sun, 8 Nov 2009 08:52:40 -0800 Subject: [PATCH] target.cfg: remove "-work-area-virt 0" The semantics of "-work-area-virt 0" (or phys) changed with the patch to require specifying physical or virtrual work area addresses. Specifying zero was previously a NOP. Now it means that address zero is valid. This patch addresses three related issues: - MMU-less processors should never specify work-area-virt; remove those specifications. Such processors include ARM7TDMI, Cortex-M3, and ARM966. - MMU-equipped processors *can* specify work-area-virt... but zero won't be appropriate, except in mischievous contexts (which hide null pointer exceptions). Remove those specs from those processors too. If any of those mappings is valid, someone will need to submit a patch adding it ... along with a comment saying what OS provides the mapping, and in which context. Example, say "works with Linux 2.6.30+, in kernel mode". (Note that ARM Linux doesn't map kernel memory to zero ...) - Clarify docs on that "-virt" and other work area stuff. Seems to me work-area-virt is quite problematic; not every operating system provides such static mappings; if they do, they're not in every MMU context... Signed-off-by: David Brownell --- doc/openocd.texi | 7 ++++++- tcl/board/at91sam9g20-ek.cfg | 4 ++-- tcl/board/digi_connectcore_wi-9c.cfg | 2 +- tcl/board/hitex_str9-comstick.cfg | 2 +- tcl/board/linksys_nslu2.cfg | 2 +- tcl/board/mini2440.cfg | 2 +- tcl/board/pxa255_sst.cfg | 2 +- tcl/board/str910-eval.cfg | 2 +- tcl/board/zy1000.cfg | 2 +- tcl/target/at91eb40a.cfg | 2 +- tcl/target/at91r40008.cfg | 2 +- tcl/target/at91rm9200.cfg | 2 +- tcl/target/at91sam3uXX.cfg | 2 +- tcl/target/at91sam7sx.cfg | 2 +- tcl/target/at91sam9260.cfg | 2 +- tcl/target/at91sam9260_ext_RAM_ext_flash.cfg | 2 +- tcl/target/cs351x.cfg | 2 +- tcl/target/epc9301.cfg | 2 +- tcl/target/imx27.cfg | 4 +++- tcl/target/is5114.cfg | 2 +- tcl/target/lpc1768.cfg | 2 +- tcl/target/lpc2103.cfg | 2 +- tcl/target/lpc2124.cfg | 2 +- tcl/target/lpc2129.cfg | 2 +- tcl/target/lpc2148.cfg | 2 +- tcl/target/lpc2294.cfg | 2 +- tcl/target/lpc2378.cfg | 2 +- tcl/target/lpc2478.cfg | 2 +- tcl/target/mega128.cfg | 2 +- tcl/target/omap5912.cfg | 2 +- tcl/target/pic32mx.cfg | 2 +- tcl/target/pxa270.cfg | 2 +- tcl/target/sam7se512.cfg | 2 +- tcl/target/sam7x256.cfg | 2 +- tcl/target/samsung_s3c2410.cfg | 2 +- tcl/target/samsung_s3c2440.cfg | 2 +- tcl/target/stm32.cfg | 2 +- tcl/target/str710.cfg | 2 +- tcl/target/str730.cfg | 2 +- tcl/target/str750.cfg | 2 +- tcl/target/str912.cfg | 2 +- tcl/target/tmpa900.cfg | 2 +- tcl/target/tmpa910.cfg | 2 +- tcl/target/xba_revA3.cfg | 2 +- tcl/test/syntax1.cfg | 2 +- 45 files changed, 53 insertions(+), 46 deletions(-) diff --git a/doc/openocd.texi b/doc/openocd.texi index 2ddcd041..e84f4c8b 100644 --- a/doc/openocd.texi +++ b/doc/openocd.texi @@ -3185,13 +3185,18 @@ since performing a backup slows down operations. For example, the beginning of an SRAM block is likely to be used by most build systems, but the end is often unused. -@item @code{-work-area-size} @var{size} -- specify/set the work area +@item @code{-work-area-size} @var{size} -- specify work are size, +in bytes. The same size applies regardless of whether its physical +or virtual address is being used. @item @code{-work-area-phys} @var{address} -- set the work area base @var{address} to be used when no MMU is active. @item @code{-work-area-virt} @var{address} -- set the work area base @var{address} to be used when an MMU is active. +@emph{Do not specify a value for this except on targets with an MMU.} +The value should normally correspond to a static mapping for the +@code{-work-area-phys} address, set up by the current operating system. @end itemize @end deffn diff --git a/tcl/board/at91sam9g20-ek.cfg b/tcl/board/at91sam9g20-ek.cfg index 00ab7faf..6e8a1934 100644 --- a/tcl/board/at91sam9g20-ek.cfg +++ b/tcl/board/at91sam9g20-ek.cfg @@ -41,8 +41,8 @@ target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNA # AT91SAM9G20 has two SRAM areas, one starting at 0x00200000 and the other starting at 0x00300000. # Both areas are 16 kB long. -$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x00200000 -work-area-size 0x4000 -work-area-backup 1 -$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x00300000 -work-area-size 0x4000 -work-area-backup 1 +#$_TARGETNAME configure -work-area-phys 0x00200000 -work-area-size 0x4000 -work-area-backup 1 +$_TARGETNAME configure -work-area-phys 0x00300000 -work-area-size 0x4000 -work-area-backup 1 # If you don't want to execute built-in boot rom code (and there are good reasons at times not to do that) in the # AT91SAM9 family, the microcontroller is a lump on a log without initialization. Because this family has diff --git a/tcl/board/digi_connectcore_wi-9c.cfg b/tcl/board/digi_connectcore_wi-9c.cfg index 58f12a68..e6d17bdd 100644 --- a/tcl/board/digi_connectcore_wi-9c.cfg +++ b/tcl/board/digi_connectcore_wi-9c.cfg @@ -114,7 +114,7 @@ $_TARGETNAME configure -event reset-init { reg cpsr 0xd3 } -$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x00000000 -work-area-size 0x1000 -work-area-backup 1 +$_TARGETNAME configure -work-area-phys 0x00000000 -work-area-size 0x1000 -work-area-backup 1 ##################### # Flash configuration diff --git a/tcl/board/hitex_str9-comstick.cfg b/tcl/board/hitex_str9-comstick.cfg index 25ff784d..e7b79616 100644 --- a/tcl/board/hitex_str9-comstick.cfg +++ b/tcl/board/hitex_str9-comstick.cfg @@ -65,7 +65,7 @@ $_TARGETNAME configure -event reset-init { flash protect 0 0 7 off } -$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x50000000 -work-area-size 16384 -work-area-backup 0 +$_TARGETNAME configure -work-area-phys 0x50000000 -work-area-size 16384 -work-area-backup 0 #flash bank flash bank str9x 0x00000000 0x00080000 0 0 0 diff --git a/tcl/board/linksys_nslu2.cfg b/tcl/board/linksys_nslu2.cfg index 52984107..e605fc19 100644 --- a/tcl/board/linksys_nslu2.cfg +++ b/tcl/board/linksys_nslu2.cfg @@ -4,5 +4,5 @@ source [find target/ixp42x.cfg] # The _TARGETNAME is set by the above. -$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x00020000 -work-area-size 0x10000 -work-area-backup 0 +$_TARGETNAME configure -work-area-phys 0x00020000 -work-area-size 0x10000 -work-area-backup 0 diff --git a/tcl/board/mini2440.cfg b/tcl/board/mini2440.cfg index 90acafa0..d17b1076 100644 --- a/tcl/board/mini2440.cfg +++ b/tcl/board/mini2440.cfg @@ -104,7 +104,7 @@ jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0x0f -expected-id $_C set _TARGETNAME [format "%s.cpu" $_CHIPNAME] target create $_TARGETNAME arm920t -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm920t -$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 1 +$_TARGETNAME configure -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 1 #reset configuration jtag_nsrst_delay 100 diff --git a/tcl/board/pxa255_sst.cfg b/tcl/board/pxa255_sst.cfg index d9f6187b..8bc691ba 100644 --- a/tcl/board/pxa255_sst.cfg +++ b/tcl/board/pxa255_sst.cfg @@ -10,7 +10,7 @@ source [find target/pxa255.cfg] # Target name is set by above -$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x4000000 -work-area-size 0x4000 -work-area-backup 0 +$_TARGETNAME configure -work-area-phys 0x4000000 -work-area-size 0x4000 -work-area-backup 0 # flash bank [options] flash bank cfi 0x00000000 0x80000 2 2 $_TARGETNAME jedec_probe diff --git a/tcl/board/str910-eval.cfg b/tcl/board/str910-eval.cfg index e98c1c74..fa872a9b 100644 --- a/tcl/board/str910-eval.cfg +++ b/tcl/board/str910-eval.cfg @@ -39,7 +39,7 @@ jtag newtap $_CHIPNAME bs -irlen 5 -ircapture 0x1 -irmask 0x1 -expected-id $_ set _TARGETNAME [format "%s.cpu" $_CHIPNAME] target create $_TARGETNAME arm966e -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm966e -$_TARGETNAME configure -work-area-phys 0x50000000 -work-area-virt 0x50000000 -work-area-size 16384 -work-area-backup 1 +$_TARGETNAME configure -work-area-phys 0x50000000 -work-area-size 16384 -work-area-backup 1 $_TARGETNAME configure -event reset-init { # We can increase speed now that we know the target is halted. diff --git a/tcl/board/zy1000.cfg b/tcl/board/zy1000.cfg index 2e13ecbb..54bb7bb7 100644 --- a/tcl/board/zy1000.cfg +++ b/tcl/board/zy1000.cfg @@ -63,7 +63,7 @@ $_TARGETNAME configure -event reset-init { # required for usable performance. Used for lots of # other things than flash programming. -$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x00020000 -work-area-size 0x20000 -work-area-backup 0 +$_TARGETNAME configure -work-area-phys 0x00020000 -work-area-size 0x20000 -work-area-backup 0 jtag_khz 16000 diff --git a/tcl/target/at91eb40a.cfg b/tcl/target/at91eb40a.cfg index 064a3b56..8b3a9ec1 100644 --- a/tcl/target/at91eb40a.cfg +++ b/tcl/target/at91eb40a.cfg @@ -46,7 +46,7 @@ flash bank ecosflash 0x01000000 0x200000 2 2 0 ecos/at91eb40a.elf # required for usable performance. Used for lots of # other things than flash programming. -$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x00030000 -work-area-size 0x10000 -work-area-backup 0 +$_TARGETNAME configure -work-area-phys 0x00030000 -work-area-size 0x10000 -work-area-backup 0 $_TARGETNAME configure -event reset-init { puts "Running reset init script for AT91EB40A" diff --git a/tcl/target/at91r40008.cfg b/tcl/target/at91r40008.cfg index eb6cabaa..e8710f7f 100644 --- a/tcl/target/at91r40008.cfg +++ b/tcl/target/at91r40008.cfg @@ -43,7 +43,7 @@ $_TARGETNAME configure -event gdb-flash-erase-start { mww 0xffe00020 0x00000001 } -$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x3C000 -work-area-size 0x4000 -work-area-backup 0 +$_TARGETNAME configure -work-area-phys 0x3C000 -work-area-size 0x4000 -work-area-backup 0 flash bank cfi 0x10000000 0x400000 2 2 $_TARGETNAME diff --git a/tcl/target/at91rm9200.cfg b/tcl/target/at91rm9200.cfg index e20db520..e2972d72 100644 --- a/tcl/target/at91rm9200.cfg +++ b/tcl/target/at91rm9200.cfg @@ -42,7 +42,7 @@ set _TARGETNAME $_CHIPNAME.cpu target create $_TARGETNAME arm920t -endian $_ENDIAN -chain-position $_TARGETNAME # AT91RM9200 has a 16K block of sram @ 0x0020.0000 -$_TARGETNAME configure -work-area-virt 0x00200000 -work-area-phys 0x00200000 \ +$_TARGETNAME configure -work-area-phys 0x00200000 \ -work-area-size 0x4000 -work-area-backup 1 # This chip has a DCC ... use it diff --git a/tcl/target/at91sam3uXX.cfg b/tcl/target/at91sam3uXX.cfg index d54d3a4d..985e052a 100644 --- a/tcl/target/at91sam3uXX.cfg +++ b/tcl/target/at91sam3uXX.cfg @@ -33,7 +33,7 @@ set _TARGETNAME $_CHIPNAME.cpu target create $_TARGETNAME cortex_m3 -endian $_ENDIAN -chain-position $_TARGETNAME # 16K is plenty, the smallest chip has this much -$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x20000000 -work-area-size 16384 -work-area-backup 0 +$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size 16384 -work-area-backup 0 reset_config srst_only diff --git a/tcl/target/at91sam7sx.cfg b/tcl/target/at91sam7sx.cfg index 5cde979d..2a7f90c5 100644 --- a/tcl/target/at91sam7sx.cfg +++ b/tcl/target/at91sam7sx.cfg @@ -46,7 +46,7 @@ $_TARGETNAME configure -event reset-init { sleep 100 } -$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x00200000 -work-area-size 0x4000 -work-area-backup 0 +$_TARGETNAME configure -work-area-phys 0x00200000 -work-area-size 0x4000 -work-area-backup 0 #flash bank [ ] flash bank at91sam7 0 0 0 0 0 0 0 0 0 0 0 0 18432 diff --git a/tcl/target/at91sam9260.cfg b/tcl/target/at91sam9260.cfg index a6eaa76e..df08d10d 100644 --- a/tcl/target/at91sam9260.cfg +++ b/tcl/target/at91sam9260.cfg @@ -39,6 +39,6 @@ set _TARGETNAME $_CHIPNAME.cpu target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm926ejs # Internal sram1 memory -$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x00300000 -work-area-size 0x1000 -work-area-backup 1 +$_TARGETNAME configure -work-area-phys 0x00300000 -work-area-size 0x1000 -work-area-backup 1 diff --git a/tcl/target/at91sam9260_ext_RAM_ext_flash.cfg b/tcl/target/at91sam9260_ext_RAM_ext_flash.cfg index 2548962c..de7e9ab2 100644 --- a/tcl/target/at91sam9260_ext_RAM_ext_flash.cfg +++ b/tcl/target/at91sam9260_ext_RAM_ext_flash.cfg @@ -47,7 +47,7 @@ target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNA $_TARGETNAME invoke-event halted # Internal sram1 memory -$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x00300000 -work-area-size 0x1000 -work-area-backup 1 +$_TARGETNAME configure -work-area-phys 0x00300000 -work-area-size 0x1000 -work-area-backup 1 scan_chain $_TARGETNAME configure -event reset-deassert-post {at91sam_init} diff --git a/tcl/target/cs351x.cfg b/tcl/target/cs351x.cfg index 237754ba..243f9639 100644 --- a/tcl/target/cs351x.cfg +++ b/tcl/target/cs351x.cfg @@ -24,7 +24,7 @@ target create $_TARGETNAME fa526 -endian $_ENDIAN -chain-position $_TARGETNAME - # There is 16K of SRAM on this chip # FIXME: flash programming is not working by using this work area. So comment this out for now. -#$_TARGETNAME configure -work-area-virt 0x00000000 -work-area-phys 0x00000000 -work-area-size 0x4000 -work-area-backup 1 +#$_TARGETNAME configure -work-area-phys 0x00000000 -work-area-size 0x4000 -work-area-backup 1 # This chip has a DCC ... use it arm7_9 dcc_downloads enable diff --git a/tcl/target/epc9301.cfg b/tcl/target/epc9301.cfg index 2b4155fb..eaf4ee96 100644 --- a/tcl/target/epc9301.cfg +++ b/tcl/target/epc9301.cfg @@ -24,7 +24,7 @@ jtag_nsrst_delay 100 jtag_ntrst_delay 100 set _TARGETNAME $_CHIPNAME.cpu -target create $_TARGETNAME arm920t -endian $_ENDIAN -chain-position $_TARGETNAME -work-area-virt 0 -work-area-phys 0x80014000 -work-area-size 0x1000 -work-area-backup 1 +target create $_TARGETNAME arm920t -endian $_ENDIAN -chain-position $_TARGETNAME -work-area-phys 0x80014000 -work-area-size 0x1000 -work-area-backup 1 #flash configuration #flash bank [driver_options ...] diff --git a/tcl/target/imx27.cfg b/tcl/target/imx27.cfg index 837ea614..4a93a675 100644 --- a/tcl/target/imx27.cfg +++ b/tcl/target/imx27.cfg @@ -40,7 +40,9 @@ jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_C # Create the GDB Target. set _TARGETNAME $_CHIPNAME.cpu target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm926ejs -$_TARGETNAME configure -work-area-virt 0xffff4c00 -work-area-phys 0xffff4c00 -work-area-size 0x8000 -work-area-backup 1 +# REVISIT what operating environment sets up this virtual address mapping? +$_TARGETNAME configure -work-area-virt 0xffff4c00 -work-area-phys 0xffff4c00 \ + -work-area-size 0x8000 -work-area-backup 1 # Internal to the chip, there is 45K of SRAM # diff --git a/tcl/target/is5114.cfg b/tcl/target/is5114.cfg index 8c153347..091bfc2f 100644 --- a/tcl/target/is5114.cfg +++ b/tcl/target/is5114.cfg @@ -46,4 +46,4 @@ $_TARGETNAME configure -event reset-init { # We can increase speed now that we know the target is halted. jtag_rclk 3000 } -$_TARGETNAME configure -work-area-phys 0x50000000 -work-area-virt 0x50000000 -work-area-size 16384 -work-area-backup 1 +$_TARGETNAME configure -work-area-phys 0x50000000 -work-area-size 16384 -work-area-backup 1 diff --git a/tcl/target/lpc1768.cfg b/tcl/target/lpc1768.cfg index 63ec1bb3..9f6bcffc 100644 --- a/tcl/target/lpc1768.cfg +++ b/tcl/target/lpc1768.cfg @@ -31,7 +31,7 @@ set _TARGETNAME $_CHIPNAME.cpu target create $_TARGETNAME cortex_m3 -endian $_ENDIAN -chain-position $_TARGETNAME # LPC1768 has 32kB of SRAM on its main system bus (so-called Local On-Chip SRAM) -$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x10000000 -work-area-size 0x8000 -work-area-backup 0 +$_TARGETNAME configure -work-area-phys 0x10000000 -work-area-size 0x8000 -work-area-backup 0 $_TARGETNAME configure -event reset-init { # Force target into ARM state diff --git a/tcl/target/lpc2103.cfg b/tcl/target/lpc2103.cfg index 1a880761..0aadee8e 100644 --- a/tcl/target/lpc2103.cfg +++ b/tcl/target/lpc2103.cfg @@ -31,7 +31,7 @@ set _TARGETNAME $_CHIPNAME.cpu target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi-s_r4 # 8kB of internal SRAM -$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-size 0x2000 -work-area-backup 0 +$_TARGETNAME configure -work-area-phys 0x40000000 -work-area-size 0x2000 -work-area-backup 0 # 32kB of internal Flash, core clocked with 12MHz crystal # flash bank lpc2000 0 0 [calc_checksum] diff --git a/tcl/target/lpc2124.cfg b/tcl/target/lpc2124.cfg index 61d411b5..471286b8 100644 --- a/tcl/target/lpc2124.cfg +++ b/tcl/target/lpc2124.cfg @@ -35,7 +35,7 @@ jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CP set _TARGETNAME $_CHIPNAME.cpu target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi-s_r4 -$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0 +$_TARGETNAME configure -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0 #flash bank diff --git a/tcl/target/lpc2129.cfg b/tcl/target/lpc2129.cfg index 5438fc3c..a686a471 100644 --- a/tcl/target/lpc2129.cfg +++ b/tcl/target/lpc2129.cfg @@ -35,7 +35,7 @@ jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CP set _TARGETNAME $_CHIPNAME.cpu target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi-s_r4 -$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0 +$_TARGETNAME configure -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0 #flash bank flash bank lpc2000 0x0 0x40000 0 0 $_TARGETNAME lpc2000_v1 14765 calc_checksum diff --git a/tcl/target/lpc2148.cfg b/tcl/target/lpc2148.cfg index b5023437..ce672c88 100644 --- a/tcl/target/lpc2148.cfg +++ b/tcl/target/lpc2148.cfg @@ -35,7 +35,7 @@ jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CP set _TARGETNAME $_CHIPNAME.cpu target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi-s_r4 -$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0 +$_TARGETNAME configure -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0 $_TARGETNAME configure -event reset-init { # Force target into ARM state diff --git a/tcl/target/lpc2294.cfg b/tcl/target/lpc2294.cfg index 08fbf581..a34940ed 100644 --- a/tcl/target/lpc2294.cfg +++ b/tcl/target/lpc2294.cfg @@ -28,7 +28,7 @@ jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CP set _TARGETNAME $_CHIPNAME.cpu target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi-s_r4 -$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0 +$_TARGETNAME configure -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0 #flash configuration #flash bank lpc2000 0 0 diff --git a/tcl/target/lpc2378.cfg b/tcl/target/lpc2378.cfg index 34b9963f..7f716f3d 100644 --- a/tcl/target/lpc2378.cfg +++ b/tcl/target/lpc2378.cfg @@ -31,7 +31,7 @@ set _TARGETNAME $_CHIPNAME.cpu target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi-s_r4 # LPC2378 has 32kB of SRAM on its main system bus (so-called Local On-Chip SRAM) -$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-size 0x8000 -work-area-backup 0 +$_TARGETNAME configure -work-area-phys 0x40000000 -work-area-size 0x8000 -work-area-backup 0 $_TARGETNAME configure -event reset-init { # Force target into ARM state diff --git a/tcl/target/lpc2478.cfg b/tcl/target/lpc2478.cfg index bf33ae0e..e78afa1a 100644 --- a/tcl/target/lpc2478.cfg +++ b/tcl/target/lpc2478.cfg @@ -31,7 +31,7 @@ set _TARGETNAME $_CHIPNAME.cpu target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi-s_r4 # LPC2478 has 64kB of SRAM on its main system bus (so-called Local On-Chip SRAM) -$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-size 0x10000 -work-area-backup 0 +$_TARGETNAME configure -work-area-phys 0x40000000 -work-area-size 0x10000 -work-area-backup 0 $_TARGETNAME configure -event reset-init { # Force target into ARM state diff --git a/tcl/target/mega128.cfg b/tcl/target/mega128.cfg index 6c0ad859..e444889e 100644 --- a/tcl/target/mega128.cfg +++ b/tcl/target/mega128.cfg @@ -20,7 +20,7 @@ jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CP set _TARGETNAME $_CHIPNAME.cpu target create $_TARGETNAME avr -endian $_ENDIAN -chain-position $_TARGETNAME -#$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x20000000 -work-area-size 16384 -work-area-backup 0 +#$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size 16384 -work-area-backup 0 flash bank avr 0 0 0 0 0 diff --git a/tcl/target/omap5912.cfg b/tcl/target/omap5912.cfg index b578457b..d825df7f 100644 --- a/tcl/target/omap5912.cfg +++ b/tcl/target/omap5912.cfg @@ -48,5 +48,5 @@ proc omap5912_reset {} { } # omap5912 lcd frame buffer as working area -$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x20000000 \ +$_TARGETNAME configure -work-area-phys 0x20000000 \ -work-area-size 0x3e800 -work-area-backup 0 diff --git a/tcl/target/pic32mx.cfg b/tcl/target/pic32mx.cfg index daa54eb9..6127a540 100644 --- a/tcl/target/pic32mx.cfg +++ b/tcl/target/pic32mx.cfg @@ -31,7 +31,7 @@ jtag newtap $_CHIPNAME cpu -irlen 5 -ircapture 0x1 -irmask 0x1f -expected-id $_ set _TARGETNAME $_CHIPNAME.cpu target create $_TARGETNAME mips_m4k -endian $_ENDIAN -chain-position $_TARGETNAME -$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0xa0000000 -work-area-size 16384 -work-area-backup 0 +$_TARGETNAME configure -work-area-phys 0xa0000000 -work-area-size 16384 -work-area-backup 0 flash bank pic32mx 0xbd000000 0 0 0 0 flash bank pic32mx 0xbfc00000 0 0 0 0 diff --git a/tcl/target/pxa270.cfg b/tcl/target/pxa270.cfg index 84fc2f77..6ca057ca 100644 --- a/tcl/target/pxa270.cfg +++ b/tcl/target/pxa270.cfg @@ -41,4 +41,4 @@ jtag newtap $_CHIPNAME cpu -irlen 7 -ircapture 0x1 -irmask 0x7f -expected-id $_C target create $_TARGETNAME xscale -endian $_ENDIAN -chain-position $_TARGETNAME -variant pxa27x # maps to PXA internal RAM. If you are using a PXA255 # you must initialize SDRAM or leave this option off -$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x5c000000 -work-area-size 0x10000 -work-area-backup 0 +$_TARGETNAME configure -work-area-phys 0x5c000000 -work-area-size 0x10000 -work-area-backup 0 diff --git a/tcl/target/sam7se512.cfg b/tcl/target/sam7se512.cfg index 4b1d85bf..0f1e4126 100644 --- a/tcl/target/sam7se512.cfg +++ b/tcl/target/sam7se512.cfg @@ -32,7 +32,7 @@ jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CP set _TARGETNAME $_CHIPNAME.cpu target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi -$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x00200000 -work-area-size 0x4000 -work-area-backup 0 +$_TARGETNAME configure -work-area-phys 0x00200000 -work-area-size 0x4000 -work-area-backup 0 #flash bank [ ] flash bank at91sam7 0 0 0 0 0 0 0 0 0 0 0 0 18432 diff --git a/tcl/target/sam7x256.cfg b/tcl/target/sam7x256.cfg index 12f30305..c3f7cd9c 100644 --- a/tcl/target/sam7x256.cfg +++ b/tcl/target/sam7x256.cfg @@ -43,7 +43,7 @@ $_TARGETNAME configure -event reset-init { sleep 100 } -$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x00200000 -work-area-size 0x4000 -work-area-backup 0 +$_TARGETNAME configure -work-area-phys 0x00200000 -work-area-size 0x4000 -work-area-backup 0 #flash bank [ ] flash bank at91sam7 0 0 0 0 0 0 0 0 0 0 0 0 18432 diff --git a/tcl/target/samsung_s3c2410.cfg b/tcl/target/samsung_s3c2410.cfg index e845eb59..9682c4c1 100644 --- a/tcl/target/samsung_s3c2410.cfg +++ b/tcl/target/samsung_s3c2410.cfg @@ -28,7 +28,7 @@ jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CP set _TARGETNAME $_CHIPNAME.cpu target create $_TARGETNAME arm920t -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm920t -$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x30800000 -work-area-size 0x20000 -work-area-backup 0 +$_TARGETNAME configure -work-area-phys 0x30800000 -work-area-size 0x20000 -work-area-backup 0 # speed up memory downloads arm7_9 fast_memory_access enable diff --git a/tcl/target/samsung_s3c2440.cfg b/tcl/target/samsung_s3c2440.cfg index f9263a52..d3b665ff 100644 --- a/tcl/target/samsung_s3c2440.cfg +++ b/tcl/target/samsung_s3c2440.cfg @@ -29,7 +29,7 @@ jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0x0f -expected-id $_C set _TARGETNAME $_CHIPNAME.cpu target create $_TARGETNAME arm920t -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm920t -$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x200000 -work-area-size 0x4000 -work-area-backup 1 +$_TARGETNAME configure -work-area-phys 0x200000 -work-area-size 0x4000 -work-area-backup 1 #reset configuration reset_config trst_and_srst diff --git a/tcl/target/stm32.cfg b/tcl/target/stm32.cfg index 97d76789..619824c5 100644 --- a/tcl/target/stm32.cfg +++ b/tcl/target/stm32.cfg @@ -63,7 +63,7 @@ jtag newtap $_CHIPNAME bs -irlen 5 -expected-id $_BSTAPID1 \ set _TARGETNAME $_CHIPNAME.cpu target create $_TARGETNAME cortex_m3 -endian $_ENDIAN -chain-position $_TARGETNAME -$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0 +$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0 flash bank stm32x 0 0 0 0 $_TARGETNAME diff --git a/tcl/target/str710.cfg b/tcl/target/str710.cfg index 215d12bb..8e5d36f0 100644 --- a/tcl/target/str710.cfg +++ b/tcl/target/str710.cfg @@ -36,7 +36,7 @@ $_TARGETNAME configure -event gdb-flash-erase-start { flash protect 1 0 1 off } -$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x2000C000 -work-area-size 0x4000 -work-area-backup 0 +$_TARGETNAME configure -work-area-phys 0x2000C000 -work-area-size 0x4000 -work-area-backup 0 #flash bank str7x 0 0 flash bank str7x 0x40000000 0x00040000 0 0 0 STR71x diff --git a/tcl/target/str730.cfg b/tcl/target/str730.cfg index d9e9ecf1..fe70802b 100644 --- a/tcl/target/str730.cfg +++ b/tcl/target/str730.cfg @@ -40,7 +40,7 @@ $_TARGETNAME configure -event gdb-flash-erase-start { flash protect 0 0 7 off } -$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0 +$_TARGETNAME configure -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0 #flash bank flash bank str7x 0x20000000 0x00040000 0 0 0 STR3x diff --git a/tcl/target/str750.cfg b/tcl/target/str750.cfg index 74f26642..22d87f87 100644 --- a/tcl/target/str750.cfg +++ b/tcl/target/str750.cfg @@ -43,7 +43,7 @@ $_TARGETNAME configure -event gdb-flash-erase-start { flash protect 1 0 1 off } -$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0 +$_TARGETNAME configure -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0 #flash bank flash bank str7x 0x20000000 0x00040000 0 0 0 STR75x diff --git a/tcl/target/str912.cfg b/tcl/target/str912.cfg index b8f8f1ac..0dd68483 100644 --- a/tcl/target/str912.cfg +++ b/tcl/target/str912.cfg @@ -60,7 +60,7 @@ $_TARGETNAME configure -event reset-init { flash protect 0 0 7 off } -$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x50000000 -work-area-size 16384 -work-area-backup 0 +$_TARGETNAME configure -work-area-phys 0x50000000 -work-area-size 16384 -work-area-backup 0 #flash bank str9x 0 0 flash bank str9x 0x00000000 0x00080000 0 0 0 diff --git a/tcl/target/tmpa900.cfg b/tcl/target/tmpa900.cfg index 719c9769..80adc652 100644 --- a/tcl/target/tmpa900.cfg +++ b/tcl/target/tmpa900.cfg @@ -52,5 +52,5 @@ target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNA #working_area 0 0xf8004000 0xc000 nobackup # Internal sram1 memory -$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0xf8004000 -work-area-size 0x8000 \ +$_TARGETNAME configure -work-area-phys 0xf8004000 -work-area-size 0x8000 \ -work-area-backup 0 diff --git a/tcl/target/tmpa910.cfg b/tcl/target/tmpa910.cfg index 4a0ec71b..4af5e4e8 100644 --- a/tcl/target/tmpa910.cfg +++ b/tcl/target/tmpa910.cfg @@ -52,5 +52,5 @@ target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNA #working_area 0 0xf8004000 0xc000 nobackup # Internal sram1 memory -$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0xf8004000 -work-area-size 0xc000 \ +$_TARGETNAME configure -work-area-phys 0xf8004000 -work-area-size 0xc000 \ -work-area-backup 0 diff --git a/tcl/target/xba_revA3.cfg b/tcl/target/xba_revA3.cfg index e1c88705..9d258a52 100644 --- a/tcl/target/xba_revA3.cfg +++ b/tcl/target/xba_revA3.cfg @@ -76,7 +76,7 @@ $_TARGETNAME configure -event reset-init { flash probe 0 } -$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x20010000 -work-area-size 0x8060 -work-area-backup 0 +$_TARGETNAME configure -work-area-phys 0x20010000 -work-area-size 0x8060 -work-area-backup 0 flash bank cfi 0x50000000 0x400000 2 2 $_TARGETNAME diff --git a/tcl/test/syntax1.cfg b/tcl/test/syntax1.cfg index 93beefca..40a7c1db 100644 --- a/tcl/test/syntax1.cfg +++ b/tcl/test/syntax1.cfg @@ -16,7 +16,7 @@ jtag newtap lpc2148 one -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id 0x4f1f0 #daemon_startup reset set _TARGETNAME [format "%s.cpu" lpc2148] -target create lpc2148.cpu arm7tdmi -endian little -work-area-size 0x4000 -work-area-phys 0x40000000 -work-area-virt 0 -work-area-backup 0 +target create lpc2148.cpu arm7tdmi -endian little -work-area-size 0x4000 -work-area-phys 0x40000000 -work-area-backup 0 $_TARGETNAME configure -event reset-init { soft_reset_halt -- 2.39.5