From 3e79b588b5199f35016f178fc0d5d1266382097f Mon Sep 17 00:00:00 2001 From: Detlev Zundel Date: Fri, 15 Aug 2008 15:42:12 +0200 Subject: [PATCH] 85xx: Socrates: Major code update. - Update the local bus ranges in the FDT for Linux for the various devices connected to the local bus via chip-select. - Set the LCRR_DBYP bit in the LCRR for local bus frequencies lower than 66 MHz and uses I/O accessor functions consequently. - UPM data update. - Update of default environment and configuration. Use I2C multibus as we do have two I2C buses. Also enable sdram and ext2 commands. Signed-off-by: Wolfgang Grandegger Signed-off-by: Sergei Poselenov Signed-off-by: Detlev Zundel --- board/socrates/socrates.c | 82 ++++++++++++++++----------- board/socrates/upm_table.h | 32 +++++------ include/configs/socrates.h | 110 ++++++++++++++++++++++--------------- 3 files changed, 132 insertions(+), 92 deletions(-) diff --git a/board/socrates/socrates.c b/board/socrates/socrates.c index d791f1135f..63694a73d2 100644 --- a/board/socrates/socrates.c +++ b/board/socrates/socrates.c @@ -37,9 +37,8 @@ #include #include -#if defined(CFG_FPGA_BASE) #include "upm_table.h" -#endif + DECLARE_GLOBAL_DATA_PTR; extern flash_info_t flash_info[]; /* FLASH chips info */ @@ -50,6 +49,7 @@ ulong flash_get_size (ulong base, int banknum); int checkboard (void) { volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR); + char *src; int f; char *s = getenv("serial#"); @@ -79,10 +79,6 @@ int checkboard (void) * Initialize local bus. */ local_bus_init (); -#if defined(CFG_FPGA_BASE) - /* Init UPMA for FPGA access */ - upmconfig(UPMA, (uint *)UPMTableA, sizeof(UPMTableA)/sizeof(int)); -#endif return 0; } @@ -149,15 +145,34 @@ int misc_init_r (void) */ void local_bus_init (void) { - volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR); volatile ccsr_local_ecm_t *ecm = (void *)(CFG_MPC85xx_ECM_ADDR); + sys_info_t sysinfo; + uint clkdiv; + uint lbc_mhz; + uint lcrr = CFG_LBC_LCRR; + + get_sys_info (&sysinfo); + clkdiv = lbc->lcrr & 0x0f; + lbc_mhz = sysinfo.freqSystemBus / 1000000 / clkdiv; + + /* Disable PLL bypass for Local Bus Clock >= 66 MHz */ + if (lbc_mhz >= 66) + lcrr &= ~LCRR_DBYP; /* DLL Enabled */ + else + lcrr |= LCRR_DBYP; /* DLL Bypass */ + + out_be32 (&lbc->lcrr, lcrr); + asm ("sync;isync;msync"); - lbc->ltesr = 0xffffffff; /* Clear LBC error interrupts */ - lbc->lteir = 0xffffffff; /* Enable LBC error interrupts */ - ecm->eedr = 0xffffffff; /* Clear ecm errors */ - ecm->eeer = 0xffffffff; /* Enable ecm errors */ + out_be32 (&lbc->ltesr, 0xffffffff); /* Clear LBC error interrupts */ + out_be32 (&lbc->lteir, 0xffffffff); /* Enable LBC error interrupts */ + out_be32 (&ecm->eedr, 0xffffffff); /* Clear ecm errors */ + out_be32 (&ecm->eeer, 0xffffffff); /* Enable ecm errors */ + /* Init UPMA for FPGA access */ + out_be32 (&lbc->mamr, 0x44440); /* Use a customer-supplied value */ + upmconfig (UPMA, (uint *)UPMTableA, sizeof(UPMTableA)/sizeof(int)); } #if defined(CONFIG_PCI) @@ -197,9 +212,14 @@ void pci_init_board (void) #ifdef CONFIG_BOARD_EARLY_INIT_R int board_early_init_r (void) { -#ifdef CONFIG_PS2MULT - ps2mult_early_init(); -#endif /* CONFIG_PS2MULT */ + volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR); + + /* set and reset the GPIO pin 2 which will reset the W83782G chip */ + out_8((unsigned char*)&gur->gpoutdr, 0x3F ); + out_be32((unsigned int*)&gur->gpiocr, 0x200 ); /* enable GPOut */ + udelay(200); + out_8( (unsigned char*)&gur->gpoutdr, 0x1F ); + return (0); } #endif /* CONFIG_BOARD_EARLY_INIT_R */ @@ -208,31 +228,27 @@ int board_early_init_r (void) void ft_board_setup(void *blob, bd_t *bd) { - u32 val[4]; - int rc; + u32 val[12]; + int rc, i = 0; ft_cpu_setup(blob, bd); - /* Fixup NOR mapping */ - val[0] = 0; /* chip select number */ - val[1] = 0; /* always 0 */ - val[2] = gd->bd->bi_flashstart; - val[3] = gd->bd->bi_flashsize; + /* Fixup NOR FLASH mapping */ + val[i++] = 0; /* chip select number */ + val[i++] = 0; /* always 0 */ + val[i++] = gd->bd->bi_flashstart; + val[i++] = gd->bd->bi_flashsize; - rc = fdt_find_and_setprop(blob, "/localbus", "ranges", - val, sizeof(val), 1); - if (rc) - printf("Unable to update property NOR mapping, err=%s\n", - fdt_strerror(rc)); + /* Fixup FPGA mapping */ + val[i++] = 3; /* chip select number */ + val[i++] = 0; /* always 0 */ + val[i++] = CFG_FPGA_BASE; + val[i++] = CFG_FPGA_SIZE; -#if defined (CFG_FPGA_BASE) - memset(val, 0, sizeof(val)); - val[0] = CFG_FPGA_BASE; - rc = fdt_find_and_setprop(blob, "/localbus/fpga", "virtual-reg", - val, sizeof(val), 1); + rc = fdt_find_and_setprop(blob, "/localbus", "ranges", + val, i * sizeof(u32), 1); if (rc) - printf("Unable to update property \"fpga\", err=%s\n", + printf("Unable to update localbus ranges, err=%s\n", fdt_strerror(rc)); -#endif } #endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ diff --git a/board/socrates/upm_table.h b/board/socrates/upm_table.h index ea64a59a0c..ed8f887cb0 100644 --- a/board/socrates/upm_table.h +++ b/board/socrates/upm_table.h @@ -34,22 +34,22 @@ /* UPM Table Configuration Code for FPGA access */ static const unsigned int UPMTableA[] = { - 0x00fcfc00, 0x00fcfc00, 0x00fcfc00, 0x00fcfc00, /* Words 0 to 3 */ - 0x00fcfc00, 0x00fcfc00, 0x00fcfc00, 0x00fcfc05, /* Words 4 to 7 */ - 0x00fcfc00, 0x00fcfc00, 0x00fcfc04, 0x00fcfc04, /* Words 8 to 11 */ - 0x00fcfc04, 0x00fcfc04, 0x00fcfc04, 0x00fcfc04, /* Words 12 to 15 */ - 0x00fcfc04, 0x00fcfc04, 0x00fcfc00, 0xfffffc00, /* Words 16 to 19 */ - 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, /* Words 20 to 23 */ - 0x0ffffc00, 0x0ffffc00, 0x0ffffc00, 0x00f3fc04, /* Words 24 to 27 */ - 0x0ffffc00, 0xfffffc01, 0xfffffc00, 0xfffffc01, /* Words 28 to 31 */ - 0x0ffffc00, 0x00f3fc04, 0x00f3fc04, 0x00f3fc04, /* Words 32 to 35 */ - 0x00f3fc04, 0x00f3fc04, 0x00f3fc04, 0x00f3fc04, /* Words 36 to 39 */ - 0x00f3fc04, 0x0ffffc00, 0xfffffc00, 0xfffffc00, /* Words 40 to 43 */ - 0xfffffc01, 0xfffffc00, 0xfffffc00, 0xfffffc01, /* Words 44 to 47 */ - 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, /* Words 48 to 51 */ - 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, /* Words 52 to 55 */ - 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, /* Words 56 to 59 */ - 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01 /* Words 60 to 63 */ + 0x00fcec00, 0x00fcec00, 0x00fcec00, 0x00fcec00, /* Words 0 to 3 */ + 0x00fcec00, 0x00fcfc00, 0x00fcfc00, 0x00fcec05, /* Words 4 to 7 */ + 0x00fcec00, 0x00fcec00, 0x00fcec04, 0x00fcec04, /* Words 8 to 11 */ + 0x00fcec04, 0x00fcec04, 0x00fcec04, 0x00fcec04, /* Words 12 to 15 */ + 0x00fcec04, 0x00fcec04, 0x0fffec00, 0xffffec00, /* Words 16 to 19 */ + 0xffffec00, 0xffffec00, 0xffffec00, 0xffffec01, /* Words 20 to 23 */ + 0x00ffec00, 0x00ffec00, 0x00f3ec00, 0x0fffec00, /* Words 24 to 27 */ + 0x0ffffc04, 0xffffec00, 0xffffec00, 0xffffec01, /* Words 28 to 31 */ + 0x00ffec00, 0x00ffec00, 0x00f3ec04, 0x00f3ec04, /* Words 32 to 35 */ + 0x00f3ec04, 0x00f3ec04, 0x00f3ec04, 0x00f3ec04, /* Words 36 to 39 */ + 0x00f3ec04, 0x00f3ec04, 0x0fffec00, 0xffffec00, /* Words 40 to 43 */ + 0xffffec00, 0xffffec00, 0xffffec00, 0xffffec01, /* Words 44 to 47 */ + 0xffffec00, 0xffffec00, 0xffffec00, 0xffffec00, /* Words 48 to 51 */ + 0xffffec00, 0xffffec00, 0xffffec00, 0xffffec00, /* Words 52 to 55 */ + 0xffffec00, 0xffffec00, 0xffffec00, 0xffffec01, /* Words 56 to 59 */ + 0xffffec00, 0xffffec00, 0xffffec00, 0xffffec01 /* Words 60 to 63 */ }; #endif diff --git a/include/configs/socrates.h b/include/configs/socrates.h index 5cc4213deb..197ed78d5d 100644 --- a/include/configs/socrates.h +++ b/include/configs/socrates.h @@ -45,6 +45,7 @@ #define CONFIG_TSEC_ENET /* tsec ethernet support */ #define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */ +#define CONFIG_BOARD_EARLY_INIT_R 1 /* Call board_early_init_r */ #define CONFIG_FSL_LAW 1 /* Use common FSL init code */ @@ -141,13 +142,12 @@ #define CFG_FLASH_BASE CFG_LBC_FLASH_BASE /* start of FLASH */ #define CFG_BR0_PRELIM 0xfe001001 /* port size 16bit */ -#define CFG_OR0_PRELIM 0xfe000ff7 /* 32MB Flash */ +#define CFG_OR0_PRELIM 0xfe000030 /* 32MB Flash */ #define CFG_BR1_PRELIM 0xfc001001 /* port size 16bit */ -#define CFG_OR1_PRELIM 0xfe000ff7 /* 32MB Flash */ +#define CFG_OR1_PRELIM 0xfe000030 /* 32MB Flash */ #define CFG_FLASH_CFI /* flash is CFI compat. */ #define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver*/ -#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector */ #define CFG_MAX_FLASH_BANKS 2 /* number of banks */ #define CFG_MAX_FLASH_SECT 256 /* sectors per device */ @@ -157,7 +157,7 @@ #define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */ -#define CFG_LBC_LCRR 0x00030008 /* LB clock ratio reg */ +#define CFG_LBC_LCRR 0x00030004 /* LB clock ratio reg */ #define CFG_LBC_LBCR 0x00000000 /* LB config reg */ #define CFG_LBC_LSRT 0x20000000 /* LB sdram refresh timer */ #define CFG_LBC_MRTPR 0x20000000 /* LB refresh timer presc.*/ @@ -171,8 +171,20 @@ #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET -#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256kB for Mon*/ -#define CFG_MALLOC_LEN (256 * 1024) /* Reserved for malloc */ +#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256kB for Mon */ +#define CFG_MALLOC_LEN (4 << 20) /* Reserve 4 MB for malloc */ + +/* FPGA and NAND */ +#define CFG_FPGA_BASE 0xc0000000 +#define CFG_FPGA_SIZE 0x00100000 /* 1 MB */ +#define CFG_HMI_BASE 0xc0010000 +#define CFG_BR3_PRELIM 0xc0001881 /* UPMA, 32-bit */ +#define CFG_OR3_PRELIM 0xfff00000 /* 1 MB */ + +#define CFG_NAND_BASE (CFG_FPGA_BASE + 0x70) +#define CFG_MAX_NAND_DEVICE 1 +#define NAND_MAX_CHIPS 1 +#define CONFIG_CMD_NAND /* Serial Port */ @@ -204,11 +216,14 @@ #define CONFIG_FSL_I2C /* Use FSL common I2C driver */ #define CONFIG_HARD_I2C /* I2C with hardware support */ #undef CONFIG_SOFT_I2C /* I2C bit-banged */ -#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CFG_I2C_SPEED 102124 /* I2C speed and slave address */ #define CFG_I2C_SLAVE 0x7F -#define CFG_I2C_NOPROBES {0x48} /* Don't probe these addrs */ #define CFG_I2C_OFFSET 0x3000 +#define CONFIG_I2C_MULTI_BUS +#define CONFIG_I2C_CMD_TREE +#define CFG_I2C2_OFFSET 0x3100 + /* I2C RTC */ #define CONFIG_RTC_RX8025 /* Use Epson rx8025 rtc via i2c */ #define CFG_I2C_RTC_ADDR 0x32 /* at address 0x32 */ @@ -302,18 +317,18 @@ #define CONFIG_CMD_DTT #undef CONFIG_CMD_EEPROM #define CONFIG_CMD_I2C +#define CONFIG_CMD_SDRAM #define CONFIG_CMD_MII #define CONFIG_CMD_NFS #define CONFIG_CMD_PING #define CONFIG_CMD_SNTP #define CONFIG_CMD_USB - +#define CONFIG_CMD_EXT2 /* EXT2 Support */ #if defined(CONFIG_PCI) #define CONFIG_CMD_PCI #endif - #undef CONFIG_WATCHDOG /* watchdog disabled */ /* @@ -357,50 +372,69 @@ #define CONFIG_LOADADDR 200000 /* default addr for tftp & bootm*/ -#define CONFIG_BOOTDELAY 5 /* -1 disables auto-boot */ +#define CONFIG_BOOTDELAY 1 /* -1 disables auto-boot */ #define CONFIG_PREBOOT "echo;" \ - "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \ + "echo Welcome on the ABB Socrates Board;" \ "echo" #undef CONFIG_BOOTARGS /* the boot command will set bootargs */ #define CONFIG_EXTRA_ENV_SETTINGS \ - "bootfile=$hostname/uImage\0" \ "netdev=eth0\0" \ "consdev=ttyS0\0" \ - "hostname=socrates\0" \ + "uboot_file=/home/tftp/syscon3/u-boot.bin\0" \ + "bootfile=/home/tftp/syscon3/uImage\0" \ + "fdt_file=/home/tftp/syscon3/socrates.dtb\0" \ + "initrd_file=/home/tftp/syscon3/uinitrd.gz\0" \ + "uboot_addr=FFFA0000\0" \ + "kernel_addr=FE000000\0" \ + "fdt_addr=FE1E0000\0" \ + "ramdisk_addr=FE200000\0" \ + "fdt_addr_r=B00000\0" \ + "kernel_addr_r=200000\0" \ + "ramdisk_addr_r=400000\0" \ + "rootpath=/opt/eldk/ppc_85xxDP\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ "nfsargs=setenv bootargs root=/dev/nfs rw " \ "nfsroot=$serverip:$rootpath\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addcons=setenv bootargs $bootargs " \ + "console=$consdev,$baudrate\0" \ "addip=setenv bootargs $bootargs " \ "ip=$ipaddr:$serverip:$gatewayip:$netmask" \ ":$hostname:$netdev:off panic=1\0" \ - "addcons=setenv bootargs $bootargs " \ - "console=$consdev,$baudrate\0" \ - "flash_self=run ramargs addip addcons;" \ + "boot_nor=run ramargs addcons;" \ "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ - "flash_nfs=run nfsargs addip addcons;" \ - "bootm ${kernel_addr} - ${fdt_addr}\0" \ "net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \ "tftp ${fdt_addr_r} ${fdt_file}; " \ "run nfsargs addip addcons;" \ "bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \ - "fdt_file=$hostname/socrates.dtb\0" \ - "fdt_addr_r=B00000\0" \ - "fdt_addr=FC1E0000\0" \ - "rootpath=/opt/eldk/ppc_85xxDP\0" \ - "kernel_addr=FC000000\0" \ - "kernel_addr_r=200000\0" \ - "ramdisk_addr=FC200000\0" \ - "ramdisk_addr_r=400000\0" \ - "load=tftp 100000 $hostname/u-boot.bin\0" \ - "update=protect off fffc0000 ffffffff;era fffc0000 ffffffff;" \ - "cp.b 100000 fffc0000 40000;" \ + "update_uboot=tftp 100000 ${uboot_file};" \ + "protect off fffa0000 ffffffff;" \ + "era fffa0000 ffffffff;" \ + "cp.b 100000 fffa0000 ${filesize};" \ + "setenv filesize;saveenv\0" \ + "update_kernel=tftp 100000 ${bootfile};" \ + "era fe000000 fe1dffff;" \ + "cp.b 100000 fe000000 ${filesize};" \ "setenv filesize;saveenv\0" \ - "upd=run load update\0" \ + "update_fdt=tftp 100000 ${fdt_file};" \ + "era fe1e0000 fe1fffff;" \ + "cp.b 100000 fe1e0000 ${filesize};" \ + "setenv filesize;saveenv\0" \ + "update_initrd=tftp 100000 ${initrd_file};" \ + "era fe200000 fe9fffff;" \ + "cp.b 100000 fe200000 ${filesize};" \ + "setenv filesize;saveenv\0" \ + "clean_data=era fea00000 fff5ffff\0" \ + "usbargs=setenv bootargs root=/dev/sda1 rw\0" \ + "load_usb=usb start;" \ + "ext2load usb 0:1 ${kernel_addr_r} /boot/uImage\0" \ + "boot_usb=run load_usb usbargs addcons;" \ + "bootm ${kernel_addr_r} - ${fdt_addr};" \ + "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ "" -#define CONFIG_BOOTCOMMAND "run flash_self" +#define CONFIG_BOOTCOMMAND "run boot_nor" /* pass open firmware flat tree */ #define CONFIG_OF_LIBFDT 1 @@ -417,14 +451,4 @@ #define CONFIG_DOS_PARTITION 1 #define CONFIG_USB_STORAGE 1 -/* FPGA and NAND */ -#define CFG_FPGA_BASE 0xc0000000 -#define CFG_BR3_PRELIM 0xc0001881 /* UPMA, 32-bit */ -#define CFG_OR3_PRELIM 0xfff00000 /* 1 MB */ - -#define CFG_NAND_BASE (CFG_FPGA_BASE + 0x70) -#define CFG_MAX_NAND_DEVICE 1 -#define NAND_MAX_CHIPS 1 -#define CONFIG_CMD_NAND - #endif /* __CONFIG_H */ -- 2.39.2