From 3fe3b4fb1c5adb00502276312696e38e9a7e9b5b Mon Sep 17 00:00:00 2001 From: DrEagle Date: Fri, 25 Jul 2014 21:07:30 +0200 Subject: [PATCH] ARM: kirkwood: add mvsdio driver This patch add Marvell kirkwood MVSDIO/MMC driver and enable it for Sheevaplugs and OpenRD boards. Signed-off-by: Gerald Kerma Reviewed-by: Stefan Roese Acked-by: Pantelis Antoniou --- arch/arm/cpu/arm926ejs/kirkwood/cpu.c | 9 + arch/arm/include/asm/arch-kirkwood/kirkwood.h | 1 + drivers/mmc/Makefile | 1 + drivers/mmc/mvebu_mmc.c | 361 ++++++++++++++++++ include/configs/openrd.h | 8 + include/configs/sheevaplug.h | 11 + include/mvebu_mmc.h | 278 ++++++++++++++ 7 files changed, 669 insertions(+) create mode 100644 drivers/mmc/mvebu_mmc.c create mode 100644 include/mvebu_mmc.h diff --git a/arch/arm/cpu/arm926ejs/kirkwood/cpu.c b/arch/arm/cpu/arm926ejs/kirkwood/cpu.c index da80240052..881e2de81b 100644 --- a/arch/arm/cpu/arm926ejs/kirkwood/cpu.c +++ b/arch/arm/cpu/arm926ejs/kirkwood/cpu.c @@ -13,6 +13,7 @@ #include #include #include +#include #define BUFLEN 16 @@ -377,3 +378,11 @@ int cpu_eth_init(bd_t *bis) return 0; } #endif + +#ifdef CONFIG_MVEBU_MMC +int board_mmc_init(bd_t *bis) +{ + mvebu_mmc_init(bis); + return 0; +} +#endif /* CONFIG_MVEBU_MMC */ diff --git a/arch/arm/include/asm/arch-kirkwood/kirkwood.h b/arch/arm/include/asm/arch-kirkwood/kirkwood.h index bc207f536c..3ea51d7848 100644 --- a/arch/arm/include/asm/arch-kirkwood/kirkwood.h +++ b/arch/arm/include/asm/arch-kirkwood/kirkwood.h @@ -39,6 +39,7 @@ #define KW_EGIGA0_BASE (KW_REGISTER(0x72000)) #define KW_EGIGA1_BASE (KW_REGISTER(0x76000)) #define KW_SATA_BASE (KW_REGISTER(0x80000)) +#define KW_SDIO_BASE (KW_REGISTER(0x90000)) /* Kirkwood Sata controller has two ports */ #define KW_SATA_PORT0_OFFSET 0x2000 diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile index 34febf52f0..f5be96f5e5 100644 --- a/drivers/mmc/Makefile +++ b/drivers/mmc/Makefile @@ -37,3 +37,4 @@ obj-$(CONFIG_SPL_MMC_BOOT) += fsl_esdhc_spl.o else obj-$(CONFIG_GENERIC_MMC) += mmc_write.o endif +obj-$(CONFIG_MVEBU_MMC) += mvebu_mmc.o diff --git a/drivers/mmc/mvebu_mmc.c b/drivers/mmc/mvebu_mmc.c new file mode 100644 index 0000000000..97591983d2 --- /dev/null +++ b/drivers/mmc/mvebu_mmc.c @@ -0,0 +1,361 @@ +/* + * Marvell MMC/SD/SDIO driver + * + * (C) Copyright 2012 + * Marvell Semiconductor + * Written-by: Maen Suleiman, Gerald Kerma + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRIVER_NAME "MVEBU_MMC" + +static void mvebu_mmc_write(u32 offs, u32 val) +{ + writel(val, CONFIG_SYS_MMC_BASE + (offs)); +} + +static u32 mvebu_mmc_read(u32 offs) +{ + return readl(CONFIG_SYS_MMC_BASE + (offs)); +} + +static int mvebu_mmc_setup_data(struct mmc_data *data) +{ + u32 ctrl_reg; + + debug("%s, data %s : blocks=%d blksz=%d\n", DRIVER_NAME, + (data->flags & MMC_DATA_READ) ? "read" : "write", + data->blocks, data->blocksize); + + /* default to maximum timeout */ + ctrl_reg = mvebu_mmc_read(SDIO_HOST_CTRL); + ctrl_reg |= SDIO_HOST_CTRL_TMOUT(SDIO_HOST_CTRL_TMOUT_MAX); + mvebu_mmc_write(SDIO_HOST_CTRL, ctrl_reg); + + if (data->flags & MMC_DATA_READ) { + mvebu_mmc_write(SDIO_SYS_ADDR_LOW, (u32)data->dest & 0xffff); + mvebu_mmc_write(SDIO_SYS_ADDR_HI, (u32)data->dest >> 16); + } else { + mvebu_mmc_write(SDIO_SYS_ADDR_LOW, (u32)data->src & 0xffff); + mvebu_mmc_write(SDIO_SYS_ADDR_HI, (u32)data->src >> 16); + } + + mvebu_mmc_write(SDIO_BLK_COUNT, data->blocks); + mvebu_mmc_write(SDIO_BLK_SIZE, data->blocksize); + + return 0; +} + +static int mvebu_mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, + struct mmc_data *data) +{ + int timeout = 10; + ushort waittype = 0; + ushort resptype = 0; + ushort xfertype = 0; + ushort resp_indx = 0; + + debug("cmdidx [0x%x] resp_type[0x%x] cmdarg[0x%x]\n", + cmd->cmdidx, cmd->resp_type, cmd->cmdarg); + + udelay(10*1000); + + debug("%s: cmd %d (hw state 0x%04x)\n", DRIVER_NAME, + cmd->cmdidx, mvebu_mmc_read(SDIO_HW_STATE)); + + /* Checking if card is busy */ + while ((mvebu_mmc_read(SDIO_HW_STATE) & CARD_BUSY)) { + if (timeout == 0) { + printf("%s: card busy!\n", DRIVER_NAME); + return -1; + } + timeout--; + udelay(1000); + } + + /* Set up for a data transfer if we have one */ + if (data) { + int err = mvebu_mmc_setup_data(data); + + if (err) + return err; + } + + resptype = SDIO_CMD_INDEX(cmd->cmdidx); + + /* Analyzing resptype/xfertype/waittype for the command */ + if (cmd->resp_type & MMC_RSP_BUSY) + resptype |= SDIO_CMD_RSP_48BUSY; + else if (cmd->resp_type & MMC_RSP_136) + resptype |= SDIO_CMD_RSP_136; + else if (cmd->resp_type & MMC_RSP_PRESENT) + resptype |= SDIO_CMD_RSP_48; + else + resptype |= SDIO_CMD_RSP_NONE; + + if (cmd->resp_type & MMC_RSP_CRC) + resptype |= SDIO_CMD_CHECK_CMDCRC; + + if (cmd->resp_type & MMC_RSP_OPCODE) + resptype |= SDIO_CMD_INDX_CHECK; + + if (cmd->resp_type & MMC_RSP_PRESENT) { + resptype |= SDIO_UNEXPECTED_RESP; + waittype |= SDIO_NOR_UNEXP_RSP; + } + + if (data) { + resptype |= SDIO_CMD_DATA_PRESENT | SDIO_CMD_CHECK_DATACRC16; + xfertype |= SDIO_XFER_MODE_HW_WR_DATA_EN; + if (data->flags & MMC_DATA_READ) { + xfertype |= SDIO_XFER_MODE_TO_HOST; + waittype = SDIO_NOR_DMA_INI; + } else { + waittype |= SDIO_NOR_XFER_DONE; + } + } else { + waittype |= SDIO_NOR_CMD_DONE; + } + + /* Setting cmd arguments */ + mvebu_mmc_write(SDIO_ARG_LOW, cmd->cmdarg & 0xffff); + mvebu_mmc_write(SDIO_ARG_HI, cmd->cmdarg >> 16); + + /* Setting Xfer mode */ + mvebu_mmc_write(SDIO_XFER_MODE, xfertype); + + mvebu_mmc_write(SDIO_NOR_INTR_STATUS, ~SDIO_NOR_CARD_INT); + mvebu_mmc_write(SDIO_ERR_INTR_STATUS, SDIO_POLL_MASK); + + /* Sending command */ + mvebu_mmc_write(SDIO_CMD, resptype); + + mvebu_mmc_write(SDIO_NOR_INTR_EN, SDIO_POLL_MASK); + mvebu_mmc_write(SDIO_ERR_INTR_EN, SDIO_POLL_MASK); + + /* Waiting for completion */ + timeout = 1000000; + + while (!((mvebu_mmc_read(SDIO_NOR_INTR_STATUS)) & waittype)) { + if (mvebu_mmc_read(SDIO_NOR_INTR_STATUS) & SDIO_NOR_ERROR) { + debug("%s: error! cmdidx : %d, err reg: %04x\n", + DRIVER_NAME, cmd->cmdidx, + mvebu_mmc_read(SDIO_ERR_INTR_STATUS)); + if (mvebu_mmc_read(SDIO_ERR_INTR_STATUS) & + (SDIO_ERR_CMD_TIMEOUT | SDIO_ERR_DATA_TIMEOUT)) + return TIMEOUT; + return COMM_ERR; + } + + timeout--; + udelay(1); + if (timeout <= 0) { + printf("%s: command timed out\n", DRIVER_NAME); + return TIMEOUT; + } + } + + /* Handling response */ + if (cmd->resp_type & MMC_RSP_136) { + uint response[8]; + + for (resp_indx = 0; resp_indx < 8; resp_indx++) + response[resp_indx] + = mvebu_mmc_read(SDIO_RSP(resp_indx)); + + cmd->response[0] = ((response[0] & 0x03ff) << 22) | + ((response[1] & 0xffff) << 6) | + ((response[2] & 0xfc00) >> 10); + cmd->response[1] = ((response[2] & 0x03ff) << 22) | + ((response[3] & 0xffff) << 6) | + ((response[4] & 0xfc00) >> 10); + cmd->response[2] = ((response[4] & 0x03ff) << 22) | + ((response[5] & 0xffff) << 6) | + ((response[6] & 0xfc00) >> 10); + cmd->response[3] = ((response[6] & 0x03ff) << 22) | + ((response[7] & 0x3fff) << 8); + } else if (cmd->resp_type & MMC_RSP_PRESENT) { + uint response[3]; + + for (resp_indx = 0; resp_indx < 3; resp_indx++) + response[resp_indx] + = mvebu_mmc_read(SDIO_RSP(resp_indx)); + + cmd->response[0] = ((response[2] & 0x003f) << (8 - 8)) | + ((response[1] & 0xffff) << (14 - 8)) | + ((response[0] & 0x03ff) << (30 - 8)); + cmd->response[1] = ((response[0] & 0xfc00) >> 10); + cmd->response[2] = 0; + cmd->response[3] = 0; + } + + debug("%s: resp[0x%x] ", DRIVER_NAME, cmd->resp_type); + debug("[0x%x] ", cmd->response[0]); + debug("[0x%x] ", cmd->response[1]); + debug("[0x%x] ", cmd->response[2]); + debug("[0x%x] ", cmd->response[3]); + debug("\n"); + + return 0; +} + +static void mvebu_mmc_power_up(void) +{ + debug("%s: power up\n", DRIVER_NAME); + + /* disable interrupts */ + mvebu_mmc_write(SDIO_NOR_INTR_EN, 0); + mvebu_mmc_write(SDIO_ERR_INTR_EN, 0); + + /* SW reset */ + mvebu_mmc_write(SDIO_SW_RESET, SDIO_SW_RESET_NOW); + + mvebu_mmc_write(SDIO_XFER_MODE, 0); + + /* enable status */ + mvebu_mmc_write(SDIO_NOR_STATUS_EN, SDIO_POLL_MASK); + mvebu_mmc_write(SDIO_ERR_STATUS_EN, SDIO_POLL_MASK); + + /* enable interrupts status */ + mvebu_mmc_write(SDIO_NOR_INTR_STATUS, SDIO_POLL_MASK); + mvebu_mmc_write(SDIO_ERR_INTR_STATUS, SDIO_POLL_MASK); +} + +static void mvebu_mmc_set_clk(unsigned int clock) +{ + unsigned int m; + + if (clock == 0) { + debug("%s: clock off\n", DRIVER_NAME); + mvebu_mmc_write(SDIO_XFER_MODE, SDIO_XFER_MODE_STOP_CLK); + mvebu_mmc_write(SDIO_CLK_DIV, MVEBU_MMC_BASE_DIV_MAX); + } else { + m = MVEBU_MMC_BASE_FAST_CLOCK/(2*clock) - 1; + if (m > MVEBU_MMC_BASE_DIV_MAX) + m = MVEBU_MMC_BASE_DIV_MAX; + mvebu_mmc_write(SDIO_CLK_DIV, m & MVEBU_MMC_BASE_DIV_MAX); + } + + udelay(10*1000); +} + +static void mvebu_mmc_set_bus(unsigned int bus) +{ + u32 ctrl_reg = 0; + + ctrl_reg = mvebu_mmc_read(SDIO_HOST_CTRL); + ctrl_reg &= ~SDIO_HOST_CTRL_DATA_WIDTH_4_BITS; + + switch (bus) { + case 4: + ctrl_reg |= SDIO_HOST_CTRL_DATA_WIDTH_4_BITS; + break; + case 1: + default: + ctrl_reg |= SDIO_HOST_CTRL_DATA_WIDTH_1_BIT; + } + + /* default transfer mode */ + ctrl_reg |= SDIO_HOST_CTRL_BIG_ENDIAN; + ctrl_reg &= ~SDIO_HOST_CTRL_LSB_FIRST; + + /* default to maximum timeout */ + ctrl_reg |= SDIO_HOST_CTRL_TMOUT(SDIO_HOST_CTRL_TMOUT_MAX); + + ctrl_reg |= SDIO_HOST_CTRL_PUSH_PULL_EN; + + ctrl_reg |= SDIO_HOST_CTRL_CARD_TYPE_MEM_ONLY; + + debug("%s: ctrl 0x%04x: %s %s %s\n", DRIVER_NAME, ctrl_reg, + (ctrl_reg & SDIO_HOST_CTRL_PUSH_PULL_EN) ? + "push-pull" : "open-drain", + (ctrl_reg & SDIO_HOST_CTRL_DATA_WIDTH_4_BITS) ? + "4bit-width" : "1bit-width", + (ctrl_reg & SDIO_HOST_CTRL_HI_SPEED_EN) ? + "high-speed" : ""); + + mvebu_mmc_write(SDIO_HOST_CTRL, ctrl_reg); + udelay(10*1000); +} + +static void mvebu_mmc_set_ios(struct mmc *mmc) +{ + debug("%s: bus[%d] clock[%d]\n", DRIVER_NAME, + mmc->bus_width, mmc->clock); + mvebu_mmc_set_bus(mmc->bus_width); + mvebu_mmc_set_clk(mmc->clock); +} + +static int mvebu_mmc_initialize(struct mmc *mmc) +{ + debug("%s: mvebu_mmc_initialize", DRIVER_NAME); + + /* + * Setting host parameters + * Initial Host Ctrl : Timeout : max , Normal Speed mode, + * 4-bit data mode, Big Endian, SD memory Card, Push_pull CMD Line + */ + mvebu_mmc_write(SDIO_HOST_CTRL, + SDIO_HOST_CTRL_TMOUT(SDIO_HOST_CTRL_TMOUT_MAX) | + SDIO_HOST_CTRL_DATA_WIDTH_4_BITS | + SDIO_HOST_CTRL_BIG_ENDIAN | + SDIO_HOST_CTRL_PUSH_PULL_EN | + SDIO_HOST_CTRL_CARD_TYPE_MEM_ONLY); + + mvebu_mmc_write(SDIO_CLK_CTRL, 0); + + /* enable status */ + mvebu_mmc_write(SDIO_NOR_STATUS_EN, SDIO_POLL_MASK); + mvebu_mmc_write(SDIO_ERR_STATUS_EN, SDIO_POLL_MASK); + + /* disable interrupts */ + mvebu_mmc_write(SDIO_NOR_INTR_EN, 0); + mvebu_mmc_write(SDIO_ERR_INTR_EN, 0); + + /* SW reset */ + mvebu_mmc_write(SDIO_SW_RESET, SDIO_SW_RESET_NOW); + + udelay(10*1000); + + return 0; +} + +static const struct mmc_ops mvebu_mmc_ops = { + .send_cmd = mvebu_mmc_send_cmd, + .set_ios = mvebu_mmc_set_ios, + .init = mvebu_mmc_initialize, +}; + +static struct mmc_config mvebu_mmc_cfg = { + .name = DRIVER_NAME, + .ops = &mvebu_mmc_ops, + .f_min = MVEBU_MMC_BASE_FAST_CLOCK / MVEBU_MMC_BASE_DIV_MAX, + .f_max = MVEBU_MMC_CLOCKRATE_MAX, + .voltages = MMC_VDD_32_33 | MMC_VDD_33_34, + .host_caps = MMC_MODE_4BIT | MMC_MODE_HS, + .part_type = PART_TYPE_DOS, + .b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT, +}; + +int mvebu_mmc_init(bd_t *bis) +{ + struct mmc *mmc; + + mvebu_mmc_power_up(); + + mmc = mmc_create(&mvebu_mmc_cfg, bis); + if (mmc == NULL) + return -1; + + return 0; +} diff --git a/include/configs/openrd.h b/include/configs/openrd.h index 8fab6e63e3..3eb408f004 100644 --- a/include/configs/openrd.h +++ b/include/configs/openrd.h @@ -49,6 +49,7 @@ #define CONFIG_CMD_DHCP #define CONFIG_CMD_ENV #define CONFIG_CMD_MII +#define CONFIG_CMD_MMC #define CONFIG_CMD_NAND #define CONFIG_CMD_PING #define CONFIG_CMD_USB @@ -123,4 +124,11 @@ #define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET #endif /*CONFIG_MVSATA_IDE*/ +#ifdef CONFIG_CMD_MMC +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_MVEBU_MMC +#define CONFIG_SYS_MMC_BASE KW_SDIO_BASE +#endif /* CONFIG_CMD_MMC */ + #endif /* _CONFIG_OPENRD_BASE_H */ diff --git a/include/configs/sheevaplug.h b/include/configs/sheevaplug.h index ecc93bc539..3d6ff09cb0 100644 --- a/include/configs/sheevaplug.h +++ b/include/configs/sheevaplug.h @@ -31,6 +31,7 @@ #define CONFIG_CMD_DHCP #define CONFIG_CMD_ENV #define CONFIG_CMD_MII +#define CONFIG_CMD_MMC #define CONFIG_CMD_NAND #define CONFIG_CMD_PING #define CONFIG_CMD_USB @@ -81,6 +82,16 @@ #define CONFIG_PHY_BASE_ADR 0 #endif /* CONFIG_CMD_NET */ +/* + * SDIO/MMC Card Configuration + */ +#ifdef CONFIG_CMD_MMC +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_MVEBU_MMC +#define CONFIG_SYS_MMC_BASE KW_SDIO_BASE +#endif /* CONFIG_CMD_MMC */ + /* * File system */ diff --git a/include/mvebu_mmc.h b/include/mvebu_mmc.h new file mode 100644 index 0000000000..28d98fe148 --- /dev/null +++ b/include/mvebu_mmc.h @@ -0,0 +1,278 @@ +/* + * Marvell MMC/SD/SDIO driver + * + * (C) Copyright 2012 + * Marvell Semiconductor + * Written-by: Maen Suleiman, Gerald Kerma + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __MVEBU_MMC_H__ +#define __MVEBU_MMC_H__ + +/* needed for the mmc_cfg definition */ +#include + +#define MMC_BLOCK_SIZE 512 + +/* + * Clock rates + */ + +#define MVEBU_MMC_CLOCKRATE_MAX 50000000 +#define MVEBU_MMC_BASE_DIV_MAX 0x7ff +#define MVEBU_MMC_BASE_FAST_CLOCK CONFIG_SYS_TCLK +#define MVEBU_MMC_BASE_FAST_CLK_100 100000000 +#define MVEBU_MMC_BASE_FAST_CLK_200 200000000 + +/* SDIO register */ +#define SDIO_SYS_ADDR_LOW 0x000 +#define SDIO_SYS_ADDR_HI 0x004 +#define SDIO_BLK_SIZE 0x008 +#define SDIO_BLK_COUNT 0x00c +#define SDIO_ARG_LOW 0x010 +#define SDIO_ARG_HI 0x014 +#define SDIO_XFER_MODE 0x018 +#define SDIO_CMD 0x01c +#define SDIO_RSP(i) (0x020 + ((i)<<2)) +#define SDIO_RSP0 0x020 +#define SDIO_RSP1 0x024 +#define SDIO_RSP2 0x028 +#define SDIO_RSP3 0x02c +#define SDIO_RSP4 0x030 +#define SDIO_RSP5 0x034 +#define SDIO_RSP6 0x038 +#define SDIO_RSP7 0x03c +#define SDIO_BUF_DATA_PORT 0x040 +#define SDIO_RSVED 0x044 +#define SDIO_HW_STATE 0x048 +#define SDIO_PRESENT_STATE0 0x048 +#define SDIO_PRESENT_STATE1 0x04c +#define SDIO_HOST_CTRL 0x050 +#define SDIO_BLK_GAP_CTRL 0x054 +#define SDIO_CLK_CTRL 0x058 +#define SDIO_SW_RESET 0x05c +#define SDIO_NOR_INTR_STATUS 0x060 +#define SDIO_ERR_INTR_STATUS 0x064 +#define SDIO_NOR_STATUS_EN 0x068 +#define SDIO_ERR_STATUS_EN 0x06c +#define SDIO_NOR_INTR_EN 0x070 +#define SDIO_ERR_INTR_EN 0x074 +#define SDIO_AUTOCMD12_ERR_STATUS 0x078 +#define SDIO_CURR_BYTE_LEFT 0x07c +#define SDIO_CURR_BLK_LEFT 0x080 +#define SDIO_AUTOCMD12_ARG_LOW 0x084 +#define SDIO_AUTOCMD12_ARG_HI 0x088 +#define SDIO_AUTOCMD12_INDEX 0x08c +#define SDIO_AUTO_RSP(i) (0x090 + ((i)<<2)) +#define SDIO_AUTO_RSP0 0x090 +#define SDIO_AUTO_RSP1 0x094 +#define SDIO_AUTO_RSP2 0x098 +#define SDIO_CLK_DIV 0x128 + +#define WINDOW_CTRL(i) (0x108 + ((i) << 3)) +#define WINDOW_BASE(i) (0x10c + ((i) << 3)) + +/* SDIO_PRESENT_STATE */ +#define CARD_BUSY (1 << 1) +#define CMD_INHIBIT (1 << 0) +#define CMD_TXACTIVE (1 << 8) +#define CMD_RXACTIVE (1 << 9) +#define CMD_AUTOCMD12ACTIVE (1 << 14) +#define CMD_BUS_BUSY (CMD_AUTOCMD12ACTIVE | \ + CMD_RXACTIVE | \ + CMD_TXACTIVE | \ + CMD_INHIBIT | \ + CARD_BUSY) + +/* + * SDIO_CMD + */ + +#define SDIO_CMD_RSP_NONE (0 << 0) +#define SDIO_CMD_RSP_136 (1 << 0) +#define SDIO_CMD_RSP_48 (2 << 0) +#define SDIO_CMD_RSP_48BUSY (3 << 0) + +#define SDIO_CMD_CHECK_DATACRC16 (1 << 2) +#define SDIO_CMD_CHECK_CMDCRC (1 << 3) +#define SDIO_CMD_INDX_CHECK (1 << 4) +#define SDIO_CMD_DATA_PRESENT (1 << 5) +#define SDIO_UNEXPECTED_RESP (1 << 7) + +#define SDIO_CMD_INDEX(x) ((x) << 8) + +/* + * SDIO_XFER_MODE + */ + +#define SDIO_XFER_MODE_STOP_CLK (1 << 5) +#define SDIO_XFER_MODE_HW_WR_DATA_EN (1 << 1) +#define SDIO_XFER_MODE_AUTO_CMD12 (1 << 2) +#define SDIO_XFER_MODE_INT_CHK_EN (1 << 3) +#define SDIO_XFER_MODE_TO_HOST (1 << 4) +#define SDIO_XFER_MODE_DMA (0 << 6) + +/* + * SDIO_HOST_CTRL + */ + +#define SDIO_HOST_CTRL_PUSH_PULL_EN (1 << 0) + +#define SDIO_HOST_CTRL_CARD_TYPE_MEM_ONLY (0 << 1) +#define SDIO_HOST_CTRL_CARD_TYPE_IO_ONLY (1 << 1) +#define SDIO_HOST_CTRL_CARD_TYPE_IO_MEM_COMBO (2 << 1) +#define SDIO_HOST_CTRL_CARD_TYPE_IO_MMC (3 << 1) +#define SDIO_HOST_CTRL_CARD_TYPE_MASK (3 << 1) + +#define SDIO_HOST_CTRL_BIG_ENDIAN (1 << 3) +#define SDIO_HOST_CTRL_LSB_FIRST (1 << 4) +#define SDIO_HOST_CTRL_DATA_WIDTH_1_BIT (0 << 9) +#define SDIO_HOST_CTRL_DATA_WIDTH_4_BITS (1 << 9) +#define SDIO_HOST_CTRL_HI_SPEED_EN (1 << 10) + +#define SDIO_HOST_CTRL_TMOUT_MAX 0xf +#define SDIO_HOST_CTRL_TMOUT_MASK (0xf << 11) +#define SDIO_HOST_CTRL_TMOUT(x) ((x) << 11) +#define SDIO_HOST_CTRL_TMOUT_EN (1 << 15) + +/* + * SDIO_SW_RESET + */ + +#define SDIO_SW_RESET_NOW (1 << 8) + +/* + * Normal interrupt status bits + */ + +#define SDIO_NOR_ERROR (1 << 15) +#define SDIO_NOR_UNEXP_RSP (1 << 14) +#define SDIO_NOR_AUTOCMD12_DONE (1 << 13) +#define SDIO_NOR_SUSPEND_ON (1 << 12) +#define SDIO_NOR_LMB_FF_8W_AVAIL (1 << 11) +#define SDIO_NOR_LMB_FF_8W_FILLED (1 << 10) +#define SDIO_NOR_READ_WAIT_ON (1 << 9) +#define SDIO_NOR_CARD_INT (1 << 8) +#define SDIO_NOR_READ_READY (1 << 5) +#define SDIO_NOR_WRITE_READY (1 << 4) +#define SDIO_NOR_DMA_INI (1 << 3) +#define SDIO_NOR_BLK_GAP_EVT (1 << 2) +#define SDIO_NOR_XFER_DONE (1 << 1) +#define SDIO_NOR_CMD_DONE (1 << 0) + +/* + * Error status bits + */ + +#define SDIO_ERR_CRC_STATUS (1 << 14) +#define SDIO_ERR_CRC_STARTBIT (1 << 13) +#define SDIO_ERR_CRC_ENDBIT (1 << 12) +#define SDIO_ERR_RESP_TBIT (1 << 11) +#define SDIO_ERR_XFER_SIZE (1 << 10) +#define SDIO_ERR_CMD_STARTBIT (1 << 9) +#define SDIO_ERR_AUTOCMD12 (1 << 8) +#define SDIO_ERR_DATA_ENDBIT (1 << 6) +#define SDIO_ERR_DATA_CRC (1 << 5) +#define SDIO_ERR_DATA_TIMEOUT (1 << 4) +#define SDIO_ERR_CMD_INDEX (1 << 3) +#define SDIO_ERR_CMD_ENDBIT (1 << 2) +#define SDIO_ERR_CMD_CRC (1 << 1) +#define SDIO_ERR_CMD_TIMEOUT (1 << 0) +/* enable all for polling */ +#define SDIO_POLL_MASK 0xffff + +/* + * CMD12 error status bits + */ + +#define SDIO_AUTOCMD12_ERR_NOTEXE (1 << 0) +#define SDIO_AUTOCMD12_ERR_TIMEOUT (1 << 1) +#define SDIO_AUTOCMD12_ERR_CRC (1 << 2) +#define SDIO_AUTOCMD12_ERR_ENDBIT (1 << 3) +#define SDIO_AUTOCMD12_ERR_INDEX (1 << 4) +#define SDIO_AUTOCMD12_ERR_RESP_T_BIT (1 << 5) +#define SDIO_AUTOCMD12_ERR_RESP_STARTBIT (1 << 6) + +#define MMC_RSP_PRESENT (1 << 0) +/* 136 bit response */ +#define MMC_RSP_136 (1 << 1) +/* expect valid crc */ +#define MMC_RSP_CRC (1 << 2) +/* card may send busy */ +#define MMC_RSP_BUSY (1 << 3) +/* response contains opcode */ +#define MMC_RSP_OPCODE (1 << 4) + +#define MMC_BUSMODE_OPENDRAIN 1 +#define MMC_BUSMODE_PUSHPULL 2 + +#define MMC_BUS_WIDTH_1 0 +#define MMC_BUS_WIDTH_4 2 +#define MMC_BUS_WIDTH_8 3 + +/* Can the host do 4 bit transfers */ +#define MMC_CAP_4_BIT_DATA (1 << 0) +/* Can do MMC high-speed timing */ +#define MMC_CAP_MMC_HIGHSPEED (1 << 1) +/* Can do SD high-speed timing */ +#define MMC_CAP_SD_HIGHSPEED (1 << 2) +/* Can signal pending SDIO IRQs */ +#define MMC_CAP_SDIO_IRQ (1 << 3) +/* Talks only SPI protocols */ +#define MMC_CAP_SPI (1 << 4) +/* Needs polling for card-detection */ +#define MMC_CAP_NEEDS_POLL (1 << 5) +/* Can the host do 8 bit transfers */ +#define MMC_CAP_8_BIT_DATA (1 << 6) + +/* Nonremovable e.g. eMMC */ +#define MMC_CAP_NONREMOVABLE (1 << 8) +/* Waits while card is busy */ +#define MMC_CAP_WAIT_WHILE_BUSY (1 << 9) +/* Allow erase/trim commands */ +#define MMC_CAP_ERASE (1 << 10) +/* can support DDR mode at 1.8V */ +#define MMC_CAP_1_8V_DDR (1 << 11) +/* can support DDR mode at 1.2V */ +#define MMC_CAP_1_2V_DDR (1 << 12) +/* Can power off after boot */ +#define MMC_CAP_POWER_OFF_CARD (1 << 13) +/* CMD14/CMD19 bus width ok */ +#define MMC_CAP_BUS_WIDTH_TEST (1 << 14) +/* Host supports UHS SDR12 mode */ +#define MMC_CAP_UHS_SDR12 (1 << 15) +/* Host supports UHS SDR25 mode */ +#define MMC_CAP_UHS_SDR25 (1 << 16) +/* Host supports UHS SDR50 mode */ +#define MMC_CAP_UHS_SDR50 (1 << 17) +/* Host supports UHS SDR104 mode */ +#define MMC_CAP_UHS_SDR104 (1 << 18) +/* Host supports UHS DDR50 mode */ +#define MMC_CAP_UHS_DDR50 (1 << 19) +/* Host supports Driver Type A */ +#define MMC_CAP_DRIVER_TYPE_A (1 << 23) +/* Host supports Driver Type C */ +#define MMC_CAP_DRIVER_TYPE_C (1 << 24) +/* Host supports Driver Type D */ +#define MMC_CAP_DRIVER_TYPE_D (1 << 25) +/* CMD23 supported. */ +#define MMC_CAP_CMD23 (1 << 30) +/* Hardware reset */ +#define MMC_CAP_HW_RESET (1 << 31) + +struct mvebu_mmc_cfg { + u32 mvebu_mmc_base; + u32 mvebu_mmc_clk; + u8 max_bus_width; + struct mmc_config cfg; +}; + +/* + * Functions prototypes + */ + +int mvebu_mmc_init(bd_t *bis); + +#endif /* __MVEBU_MMC_H__ */ -- 2.39.5