From 40c7f9b0de4e300370adfc704128fa0f79a143b6 Mon Sep 17 00:00:00 2001 From: Ed Swarthout Date: Fri, 27 Jul 2007 01:50:48 -0500 Subject: [PATCH] 85xx allow debugger to configure ddr. Only check for mpc8548 rev 1 when compiled for 8548. Signed-off-by: Ed Swarthout Acked-by: Andy Fleming --- cpu/mpc85xx/spd_sdram.c | 48 ++++++++++++++++++++++++++++++++++++++--- 1 file changed, 45 insertions(+), 3 deletions(-) diff --git a/cpu/mpc85xx/spd_sdram.c b/cpu/mpc85xx/spd_sdram.c index 3777f49adc..d98455401a 100644 --- a/cpu/mpc85xx/spd_sdram.c +++ b/cpu/mpc85xx/spd_sdram.c @@ -1,5 +1,5 @@ /* - * Copyright 2004 Freescale Semiconductor. + * Copyright 2004, 2007 Freescale Semiconductor. * (C) Copyright 2003 Motorola Inc. * Xianghua Xiao (X.Xiao@motorola.com) * @@ -173,7 +173,6 @@ spd_sdram(void) { volatile immap_t *immap = (immap_t *)CFG_IMMR; volatile ccsr_ddr_t *ddr = &immap->im_ddr; - volatile ccsr_gur_t *gur = &immap->im_gur; spd_eeprom_t spd; unsigned int n_ranks; unsigned int rank_density; @@ -189,7 +188,7 @@ spd_sdram(void) unsigned int max_data_rate, effective_data_rate; unsigned int busfreq; unsigned sdram_cfg; - unsigned int memsize; + unsigned int memsize = 0; unsigned char caslat, caslat_ctrl; unsigned int trfc, trfc_clk, trfc_low, trfc_high; unsigned int trcd_clk; @@ -204,6 +203,46 @@ spd_sdram(void) unsigned int mode_caslat; unsigned char sdram_type; unsigned char d_init; + unsigned int bnds; + + /* + * Skip configuration if already configured. + * memsize is determined from last configured chip select. + */ + if (ddr->cs0_config & 0x80000000) { + debug(" cs0 already configured, bnds=%x\n",ddr->cs0_bnds); + bnds = 0xfff & ddr->cs0_bnds; + if (bnds < 0xff) { /* do not add if at top of 4G */ + memsize = (bnds + 1) << 4; + } + } + if (ddr->cs1_config & 0x80000000) { + debug(" cs1 already configured, bnds=%x\n",ddr->cs1_bnds); + bnds = 0xfff & ddr->cs1_bnds; + if (bnds < 0xff) { /* do not add if at top of 4G */ + memsize = (bnds + 1) << 4; /* assume ordered bnds */ + } + } + if (ddr->cs2_config & 0x80000000) { + debug(" cs2 already configured, bnds=%x\n",ddr->cs2_bnds); + bnds = 0xfff & ddr->cs2_bnds; + if (bnds < 0xff) { /* do not add if at top of 4G */ + memsize = (bnds + 1) << 4; + } + } + if (ddr->cs3_config & 0x80000000) { + debug(" cs3 already configured, bnds=%x\n",ddr->cs3_bnds); + bnds = 0xfff & ddr->cs3_bnds; + if (bnds < 0xff) { /* do not add if at top of 4G */ + memsize = (bnds + 1) << 4; + } + } + + if (memsize) { + printf(" Reusing current %dMB configuration\n",memsize); + memsize = setup_laws_and_tlbs(memsize); + return memsize << 20; + } /* * Read SPD information. @@ -262,6 +301,7 @@ spd_sdram(void) return 0; } +#ifdef CONFIG_MPC8548 /* * Adjust DDR II IO voltage biasing. * Only 8548 rev 1 needs the fix @@ -269,9 +309,11 @@ spd_sdram(void) if ((SVR_VER(get_svr()) == SVR_8548_E) && (SVR_MJREV(get_svr()) == 1) && (spd.mem_type == SPD_MEMTYPE_DDR2)) { + volatile ccsr_gur_t *gur = &immap->im_gur; gur->ddrioovcr = (0x80000000 /* Enable */ | 0x10000000);/* VSEL to 1.8V */ } +#endif /* * Determine the size of each Rank in bytes. -- 2.39.5