From 489337f5138a819e9f0dd3a921ea21d0749f75e1 Mon Sep 17 00:00:00 2001 From: Holger Brunck Date: Mon, 2 May 2011 22:56:55 +0000 Subject: [PATCH] powerpc/km82xx: add mgcoge3ne and remove mgcoge2ne support This patch adds support for the MPC8247 based board mgcoge3ne. Additionaly mgcoge2ne board supprot was removed, because due to the mgcoge3ne, this board is obsolete and not longer maintained. The board is similar to mgcoge. The difference is that a NUMONYX flash is used and a different SDRAM (256MB). Also introduce CONFIG_KM_82XX to collect ppc82xx common settings and remove staticness from the common set_pin function. Signed-off-by: Holger Brunck Signed-off-by: Valentin Longchamp Acked-by: Heiko Schocher cc: Wolfgang Denk cc: Detlev Zundel --- MAINTAINERS | 2 +- board/keymile/common/common.c | 6 +-- board/keymile/common/common.h | 1 + board/keymile/km82xx/km82xx.c | 27 ++++++++++- boards.cfg | 2 +- include/configs/km82xx-common.h | 26 ----------- include/configs/mgcoge.h | 27 +++++++++++ include/configs/{mgcoge2ne.h => mgcoge3ne.h} | 47 +++++++++++++++----- 8 files changed, 96 insertions(+), 42 deletions(-) rename include/configs/{mgcoge2ne.h => mgcoge3ne.h} (62%) diff --git a/MAINTAINERS b/MAINTAINERS index e2a4ba931b..e2c48a8466 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -429,7 +429,7 @@ Heiko Schocher kmeter1 MPC8360 kmsupx5 MPC8321 mgcoge MPC8247 - mgcoge2ne MPC8247 + mgcoge3ne MPC8247 mgcoge2un ARM926EJS (Kirkwood SoC) mucmc52 MPC5200 muas3001 MPC8270 diff --git a/board/keymile/common/common.c b/board/keymile/common/common.c index dc9648934d..25a3850c46 100644 --- a/board/keymile/common/common.c +++ b/board/keymile/common/common.c @@ -22,7 +22,7 @@ */ #include -#if defined(CONFIG_MGCOGE) || defined(CONFIG_MGCOGE2NE) +#if defined(CONFIG_KM82XX) #include #endif #include @@ -398,10 +398,10 @@ int ivm_read_eeprom(void) #define DELAY_ABORT_SEQ 62 /* @200kHz 9 clocks = 44us, 62us is ok */ #define DELAY_HALF_PERIOD (500 / (CONFIG_SYS_I2C_SPEED / 1000)) -#if defined(CONFIG_MGCOGE) || defined(CONFIG_MGCOGE2NE) +#if defined(CONFIG_KM_82XX) #define SDA_MASK 0x00010000 #define SCL_MASK 0x00020000 -static void set_pin(int state, unsigned long mask) +void set_pin(int state, unsigned long mask) { ioport_t *iop = ioport_addr((immap_t *)CONFIG_SYS_IMMR, 3); diff --git a/board/keymile/common/common.h b/board/keymile/common/common.h index 6ce992ac32..cee24d43c1 100644 --- a/board/keymile/common/common.h +++ b/board/keymile/common/common.h @@ -124,6 +124,7 @@ struct bfticu_iomap { int ethernet_present(void); int ivm_read_eeprom(void); +void set_pin(int state, unsigned long mask); int set_km_env(void); int fdt_set_node_and_value(void *blob, diff --git a/board/keymile/km82xx/km82xx.c b/board/keymile/km82xx/km82xx.c index 01c0bfd29a..d453d25ac3 100644 --- a/board/keymile/km82xx/km82xx.c +++ b/board/keymile/km82xx/km82xx.c @@ -288,7 +288,7 @@ int checkboard(void) #if defined(CONFIG_MGCOGE) puts("Board: Keymile mgcoge"); #else - puts("Board: Keymile mgcoge2ne"); + puts("Board: Keymile mgcoge3ne"); #endif if (ethernet_present()) puts(" with PIGGY."); @@ -314,6 +314,28 @@ int last_stage_init(void) return 0; } +#ifdef CONFIG_MGCOGE3NE +/* + * For mgcoge3ne boards, the mgcoge3un control is controlled from + * a GPIO line on the PPC CPU. If bobcatreset is set the line + * will toggle once what forces the mgocge3un part to restart + * immediately. + */ +void handle_mgcoge3un_reset(void) +{ + char *bobcatreset = getenv("bobcatreset"); + if (bobcatreset) { + if (strcmp(bobcatreset, "true") == 0) { + puts("Forcing bobcat reset\n"); + set_pin(0, 0x00000004); /* clear PD29 to reset arm */ + udelay(1000); + set_pin(1, 0x00000004); + } else + set_pin(1, 0x00000004); /* set PD29 to not reset arm */ + } +} +#endif + /* * Early board initalization. */ @@ -329,6 +351,9 @@ int board_early_init_r(void) out_8(&base->oprtl, (H_OPORTS_SCC4_ENA | H_OPORTS_SCC4_FD_ENA | H_OPORTS_FCC1_PW_DWN)); +#ifdef CONFIG_MGCOGE3NE + handle_mgcoge3un_reset(); +#endif return 0; } diff --git a/boards.cfg b/boards.cfg index e0791feae9..f0d3440c61 100644 --- a/boards.cfg +++ b/boards.cfg @@ -440,7 +440,7 @@ PQ2FADS-ZU_66MHz_lowboot powerpc mpc8260 mpc8260ads freesca PQ2FADS-ZU_lowboot powerpc mpc8260 mpc8260ads freescale - MPC8260ADS:ADSTYPE=CONFIG_SYS_PQ2FADS,SYS_TEXT_BASE=0xFF800000 VoVPN-GW_66MHz powerpc mpc8260 vovpn-gw funkwerk - VoVPN-GW:CLKIN_66MHz mgcoge powerpc mpc8260 km82xx keymile -mgcoge2ne powerpc mpc8260 km82xx keymile +mgcoge3ne powerpc mpc8260 km82xx keymile SCM powerpc mpc8260 - siemens TQM8255_AA powerpc mpc8260 tqm8260 tqc - TQM8260:MPC8255,300MHz TQM8260_AA powerpc mpc8260 tqm8260 tqc - TQM8260:MPC8260,200MHz diff --git a/include/configs/km82xx-common.h b/include/configs/km82xx-common.h index 345212ca9c..da551c9cba 100644 --- a/include/configs/km82xx-common.h +++ b/include/configs/km82xx-common.h @@ -243,13 +243,6 @@ ORxG_SCY_5_CLK |\ ORxG_TRLX) - -/* - * Bank 1 - 60x bus SDRAM - */ -#define SDRAM_MAX_SIZE 0x08000000 /* max. 128 MB */ -#define CONFIG_SYS_GLOBAL_SDRAM_LIMIT (256 << 20) /* less than 256 MB */ - #define CONFIG_SYS_MPTPR 0x1800 /* @@ -267,25 +260,6 @@ #define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_OR1 -/* - * SDRAM initialization values - */ - -#define CONFIG_SYS_OR1 ((~(CONFIG_SYS_GLOBAL_SDRAM_LIMIT-1) & ORxS_SDAM_MSK) |\ - ORxS_BPD_8 |\ - ORxS_ROWST_PBI0_A7 |\ - ORxS_NUMR_13) - -#define CONFIG_SYS_PSDMR (PSDMR_SDAM_A14_IS_A5 |\ - PSDMR_BSMA_A14_A16 |\ - PSDMR_SDA10_PBI0_A9 |\ - PSDMR_RFRC_5_CLK |\ - PSDMR_PRETOACT_2W |\ - PSDMR_ACTTORW_2W |\ - PSDMR_LDOTOPRE_1C |\ - PSDMR_WRC_1C |\ - PSDMR_CL_2) - /* * UPIO FPGA (GPIO/PIGGY) on CS3 initialization values */ diff --git a/include/configs/mgcoge.h b/include/configs/mgcoge.h index 3d2ee2490b..93a6f4a83d 100644 --- a/include/configs/mgcoge.h +++ b/include/configs/mgcoge.h @@ -32,6 +32,7 @@ #define CONFIG_MPC8247 #define CONFIG_MGCOGE #define CONFIG_HOSTNAME mgcoge +#define CONFIG_KM_82XX #define CONFIG_SYS_TEXT_BASE 0xFE000000 @@ -58,6 +59,32 @@ CONFIG_SYS_FLASH_BASE_2 } #define MTDIDS_DEFAULT "nor3=app" +/* + * Bank 1 - 60x bus SDRAM + */ +#define SDRAM_MAX_SIZE 0x08000000 /* max. 128 MB */ +#define CONFIG_SYS_GLOBAL_SDRAM_LIMIT (256 << 20) /* less than 256 MB */ + +/* SDRAM initialization values +*/ + +#define CONFIG_SYS_OR1 ((~(CONFIG_SYS_GLOBAL_SDRAM_LIMIT-1) & \ + ORxS_SDAM_MSK) |\ + ORxS_BPD_8 |\ + ORxS_ROWST_PBI0_A7 |\ + ORxS_NUMR_13) + +#define CONFIG_SYS_PSDMR (PSDMR_SDAM_A14_IS_A5 |\ + PSDMR_BSMA_A14_A16 |\ + PSDMR_SDA10_PBI0_A9 |\ + PSDMR_RFRC_5_CLK |\ + PSDMR_PRETOACT_2W |\ + PSDMR_ACTTORW_2W |\ + PSDMR_LDOTOPRE_1C |\ + PSDMR_WRC_1C |\ + PSDMR_CL_2) + + /* include further common stuff for all keymile 82xx boards */ #include "km82xx-common.h" diff --git a/include/configs/mgcoge2ne.h b/include/configs/mgcoge3ne.h similarity index 62% rename from include/configs/mgcoge2ne.h rename to include/configs/mgcoge3ne.h index 287b7175c1..f080619b19 100644 --- a/include/configs/mgcoge2ne.h +++ b/include/configs/mgcoge3ne.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2007-2010 + * (C) Copyright 2011 * Heiko Schocher, DENX Software Engineering, hs@denx.de. * * See file CREDITS for list of people who contributed to this @@ -21,16 +21,18 @@ * MA 02111-1307 USA */ -#ifndef __MGCOGE2NE -#define __MGCOGE2NE +#ifndef __MGCOGE3NE +#define __MGCOGE3NE /* * High Level Configuration Options * (easy to change) */ + #define CONFIG_MPC8247 -#define CONFIG_MGCOGE -#define CONFIG_HOSTNAME mgcoge2ne +#define CONFIG_MGCOGE3NE +#define CONFIG_HOSTNAME mgcoge3ne +#define CONFIG_KM_82XX #define CONFIG_SYS_TEXT_BASE 0xFE000000 @@ -43,22 +45,47 @@ #define CONFIG_SYS_FLASH_SIZE 32 #define CONFIG_SYS_FLASH_CFI #define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_MAX_FLASH_BANKS 3 /* max num of flash banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 512 /* +#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max num of flash banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* * max num of sects on one * chip */ #define CONFIG_SYS_FLASH_BASE_1 0x50000000 -#define CONFIG_SYS_FLASH_SIZE_1 64 -#define CONFIG_SYS_FLASH_SIZE_2 0 +#define CONFIG_SYS_FLASH_SIZE_1 128 + +#define CONFIG_SYS_FLASH_SIZE_2 0 /* dummy value to calc SYS_OR5 */ #define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE, \ CONFIG_SYS_FLASH_BASE_1 } #define MTDIDS_DEFAULT "nor2=app" +/* + * Bank 1 - 60x bus SDRAM + * mgcoge3ne has 256M. + */ +#define SDRAM_MAX_SIZE 0x10000000 /* max. 256 MB */ +#define CONFIG_SYS_GLOBAL_SDRAM_LIMIT (512 << 20) /* less than 512 MB */ + +#define CONFIG_SYS_OR1 ((~(CONFIG_SYS_GLOBAL_SDRAM_LIMIT-1) & \ + ORxS_SDAM_MSK) |\ + ORxS_BPD_4 |\ + ORxS_ROWST_PBI1_A4 |\ + ORxS_NUMR_13) + +#define CONFIG_SYS_PSDMR (PSDMR_PBI |\ + PSDMR_SDAM_A17_IS_A5 |\ + PSDMR_BSMA_A13_A15 |\ + PSDMR_SDA10_PBI1_A6 |\ + PSDMR_RFRC_5_CLK |\ + PSDMR_PRETOACT_2W |\ + PSDMR_ACTTORW_2W |\ + PSDMR_LDOTOPRE_1C |\ + PSDMR_WRC_2C |\ + PSDMR_CL_2) + /* include further common stuff for all keymile 82xx boards */ #include "km82xx-common.h" -#endif /* __MGCOGE2NE */ +#endif /* __MGCOGE3NE */ -- 2.39.5