From 49d8899ba9c26335e4a12e01c18028fc5e40c796 Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Sun, 30 Aug 2015 19:19:24 -0600 Subject: [PATCH] arm: Remove pxa255_idp, zipitz2 boards These boards have not been converted to generic board by the deadline. Remove them. Signed-off-by: Simon Glass --- arch/arm/Kconfig | 10 - board/pxa255_idp/Kconfig | 9 - board/pxa255_idp/MAINTAINERS | 6 - board/pxa255_idp/Makefile | 8 - board/pxa255_idp/README | 11 - board/pxa255_idp/idp_notes.txt | 46 ---- board/pxa255_idp/pxa_idp.c | 140 ------------ board/pxa255_idp/pxa_reg_calcs.out | 119 ---------- board/pxa255_idp/pxa_reg_calcs.py | 298 ------------------------- board/zipitz2/Kconfig | 9 - board/zipitz2/MAINTAINERS | 6 - board/zipitz2/Makefile | 10 - board/zipitz2/zipitz2.c | 202 ----------------- configs/pxa255_idp_defconfig | 3 - configs/zipitz2_defconfig | 7 - include/configs/pxa255_idp.h | 335 ----------------------------- include/configs/zipitz2.h | 238 -------------------- 17 files changed, 1457 deletions(-) delete mode 100644 board/pxa255_idp/Kconfig delete mode 100644 board/pxa255_idp/MAINTAINERS delete mode 100644 board/pxa255_idp/Makefile delete mode 100644 board/pxa255_idp/README delete mode 100644 board/pxa255_idp/idp_notes.txt delete mode 100644 board/pxa255_idp/pxa_idp.c delete mode 100644 board/pxa255_idp/pxa_reg_calcs.out delete mode 100644 board/pxa255_idp/pxa_reg_calcs.py delete mode 100644 board/zipitz2/Kconfig delete mode 100644 board/zipitz2/MAINTAINERS delete mode 100644 board/zipitz2/Makefile delete mode 100644 board/zipitz2/zipitz2.c delete mode 100644 configs/pxa255_idp_defconfig delete mode 100644 configs/zipitz2_defconfig delete mode 100644 include/configs/pxa255_idp.h delete mode 100644 include/configs/zipitz2.h diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index a3a6c6e6b1..e96e902ffd 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -639,10 +639,6 @@ config TARGET_PALMTREO680 select CPU_PXA select SUPPORT_SPL -config TARGET_PXA255_IDP - bool "Support pxa255_idp" - select CPU_PXA - config TARGET_VPAC270 bool "Support vpac270" select CPU_PXA @@ -652,10 +648,6 @@ config TARGET_XAENIAX bool "Support xaeniax" select CPU_PXA -config TARGET_ZIPITZ2 - bool "Support zipitz2" - select CPU_PXA - config TARGET_COLIBRI_PXA270 bool "Support colibri_pxa270" select CPU_PXA @@ -792,7 +784,6 @@ source "board/olimex/mx23_olinuxino/Kconfig" source "board/palmtreo680/Kconfig" source "board/phytec/pcm051/Kconfig" source "board/ppcag/bg0900/Kconfig" -source "board/pxa255_idp/Kconfig" source "board/samsung/smdk2410/Kconfig" source "board/sandisk/sansa_fuze_plus/Kconfig" source "board/scb9328/Kconfig" @@ -825,7 +816,6 @@ source "board/vscom/baltos/Kconfig" source "board/woodburn/Kconfig" source "board/work-microwave/work_92105/Kconfig" source "board/xaeniax/Kconfig" -source "board/zipitz2/Kconfig" source "arch/arm/Kconfig.debug" diff --git a/board/pxa255_idp/Kconfig b/board/pxa255_idp/Kconfig deleted file mode 100644 index 544831199d..0000000000 --- a/board/pxa255_idp/Kconfig +++ /dev/null @@ -1,9 +0,0 @@ -if TARGET_PXA255_IDP - -config SYS_BOARD - default "pxa255_idp" - -config SYS_CONFIG_NAME - default "pxa255_idp" - -endif diff --git a/board/pxa255_idp/MAINTAINERS b/board/pxa255_idp/MAINTAINERS deleted file mode 100644 index 24d723602c..0000000000 --- a/board/pxa255_idp/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -PXA255_IDP BOARD -M: Cliff Brake -S: Maintained -F: board/pxa255_idp/ -F: include/configs/pxa255_idp.h -F: configs/pxa255_idp_defconfig diff --git a/board/pxa255_idp/Makefile b/board/pxa255_idp/Makefile deleted file mode 100644 index 59d696741d..0000000000 --- a/board/pxa255_idp/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := pxa_idp.o diff --git a/board/pxa255_idp/README b/board/pxa255_idp/README deleted file mode 100644 index 0cc2f2ae33..0000000000 --- a/board/pxa255_idp/README +++ /dev/null @@ -1,11 +0,0 @@ -Tested: - -- MMC -- Ethernet -- BL console (on serial port connector J5) -- flash support - -Todo: - -- display support -- PCMCIA support diff --git a/board/pxa255_idp/idp_notes.txt b/board/pxa255_idp/idp_notes.txt deleted file mode 100644 index 47467485fe..0000000000 --- a/board/pxa255_idp/idp_notes.txt +++ /dev/null @@ -1,46 +0,0 @@ -Notes on the Vibren PXA255 IDP. - -Chip select usage: - -CS0 - flash -CS1 - alt flash (Mdoc or main flash) -CS2 - high speed expansion bus -CS3 - Media Q, low speed exp bus -CS4 - low speed exp bus -CS5 - low speed exp bus - - IDE: offset 0x03000000 (abs: 0x17000000) - - Eth: offset 0x03400000 (abs: 0x17400000) - - core voltage latch: offset 0x03800000 (abs: 0x17800000) - - CPLD: offset 0x03C00000 (abs: 0x17C00000) - -PCMCIA Power control - -MAX1602EE w/ code pulled high (Cirrus code) -vx = 5v -vy = 3v - - Bit pattern - PWR 3,2,1,0 -vcc vpp A1VCC A0VCC A1VPP A0VPP -===================================================== -0 0 0 0 0 0 0x0 -3 (vy) 0 1 0 1 1 0xB -3 (vy) 3 (vy) 1 0 0 1 0x9 -3 (vy) 12(12in) 1 0 1 0 0xA -5 (vx) 0 0 1 1 1 0x7 -5 (vx) 5 (vx) 0 1 0 1 0x5 -5 (vx 12(12in) 0 1 1 0 0x6 - -Display power sequencing: - -- VDD applied -- within 1sec, activate scanning signals -- wait at least 50mS - scanning signals must be active before activating DISP - -Signal mapping: -Schematic LV8V31 signal name -========================================= -LCD_ENAVLCD DISP -LCD_PWR Applies VDD to board - -Both of the above signals are controlled by the CPLD diff --git a/board/pxa255_idp/pxa_idp.c b/board/pxa255_idp/pxa_idp.c deleted file mode 100644 index 197ff3ef31..0000000000 --- a/board/pxa255_idp/pxa_idp.c +++ /dev/null @@ -1,140 +0,0 @@ -/* - * (C) Copyright 2002 - * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH - * Marius Groeger - * - * (C) Copyright 2004 - * BEC Systems - * Cliff Brake - * Support for Accelent/Vibren PXA255 IDP - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include -#include -#include - -DECLARE_GLOBAL_DATA_PTR; - -/* - * Miscelaneous platform dependent initialisations - */ - -int board_init (void) -{ - /* We have RAM, disable cache */ - dcache_disable(); - icache_disable(); - - /* arch number of Lubbock-Board */ - gd->bd->bi_arch_number = MACH_TYPE_PXA_IDP; - - /* adress of boot parameters */ - gd->bd->bi_boot_params = 0xa0000100; - - /* turn on serial ports */ - *(volatile unsigned int *)(PXA_CS5_PHYS + 0x03C0002c) = 0x13; - - /* set PWM for LCD */ - /* a value that works is 60Hz, 77% duty cycle */ - writel(readl(CKEN) | CKEN0_PWM0, CKEN); - writel(0x3f, PWM_CTRL0); - writel(0x3ff, PWM_PERVAL0); - writel(792, PWM_PWDUTY0); - - /* clear reset to AC97 codec */ - writel(readl(CKEN) | CKEN2_AC97, CKEN); - writel(GCR_COLD_RST, GCR); - - /* enable LCD backlight */ - /* *(volatile unsigned int *)(PXA_CS5_PHYS + 0x03C00030) = 0x7; */ - - /* test display */ - /* lcd_puts("This is a test\nTest #2\n"); */ - - return 0; -} - -#ifdef CONFIG_CMD_MMC -int board_mmc_init(bd_t *bis) -{ - pxa_mmc_register(0); - return 0; -} -#endif - -int board_late_init(void) -{ - setenv("stdout", "serial"); - setenv("stderr", "serial"); - return 0; -} - -int dram_init(void) -{ - pxa2xx_dram_init(); - gd->ram_size = PHYS_SDRAM_1_SIZE; - return 0; -} - -void dram_init_banksize(void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; -} - -#ifdef DEBUG_BLINKC_ENABLE - -void delay_c(void) -{ - /* reset OSCR to 0 */ - writel(0, OSCR); - while (readl(OSCR) > 0x10000) - ; - - while (readl(OSCR) < 0xd4000) - ; -} - -void blink_c(void) -{ - int led_bit = (1<<10); - - writel(led_bit, GPDR0); - writel(led_bit, GPCR0); - delay_c(); - writel(led_bit, GPSR0); - delay_c(); - writel(led_bit, GPCR0); -} - -int do_idpcmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - printf("IDPCMD started\n"); - return 0; -} - -U_BOOT_CMD(idpcmd, CONFIG_SYS_MAXARGS, 0, do_idpcmd, - "custom IDP command", - "no args at this time" -); - -#endif - -#ifdef CONFIG_CMD_NET -int board_eth_init(bd_t *bis) -{ - int rc = 0; -#ifdef CONFIG_SMC91111 - rc = smc91111_initialize(0, CONFIG_SMC91111_BASE); -#endif - return rc; -} -#endif diff --git a/board/pxa255_idp/pxa_reg_calcs.out b/board/pxa255_idp/pxa_reg_calcs.out deleted file mode 100644 index 39295fb679..0000000000 --- a/board/pxa255_idp/pxa_reg_calcs.out +++ /dev/null @@ -1,119 +0,0 @@ -gafr0_l: 0x80001005 -gafr0_u: 0xa5128012 -gafr1_l: 0x699a9558 -gafr1_u: 0xaaa5aa6a -gafr2_l: 0xaaaaaaaa -gafr2_u: 0x2 -gpcr0: 0x1800400 -gpcr1: 0x0 -gpcr2: 0x0 -gpdr0: 0xc1818440 -gpdr1: 0xfcffab82 -gpdr2: 0x1ffff -gpsr0: 0x8000 -gpsr1: 0x3f0002 -gpsr2: 0x1c000 - - -#define CONFIG_SYS_GAFR0_L_VAL 0x80001005 -#define CONFIG_SYS_GAFR0_U_VAL 0xa5128012 -#define CONFIG_SYS_GAFR1_L_VAL 0x699a9558 -#define CONFIG_SYS_GAFR1_U_VAL 0xaaa5aa6a -#define CONFIG_SYS_GAFR2_L_VAL 0xaaaaaaaa -#define CONFIG_SYS_GAFR2_U_VAL 0x2 -#define CONFIG_SYS_GPCR0_VAL 0x1800400 -#define CONFIG_SYS_GPCR1_VAL 0x0 -#define CONFIG_SYS_GPCR2_VAL 0x0 -#define CONFIG_SYS_GPDR0_VAL 0xc1818440 -#define CONFIG_SYS_GPDR1_VAL 0xfcffab82 -#define CONFIG_SYS_GPDR2_VAL 0x1ffff -#define CONFIG_SYS_GPSR0_VAL 0x8000 -#define CONFIG_SYS_GPSR1_VAL 0x3f0002 -#define CONFIG_SYS_GPSR2_VAL 0x1c000 - - -GPIO: 0, dir=0, set=0, clr=0, alt=none, desc=USER_RESET# -GPIO: 1, dir=0, set=0, clr=0, alt=gpio reset, desc=USER_RESET# -GPIO: 2, dir=0, set=0, clr=0, alt=gpio, desc=BAT_DATA -GPIO: 3, dir=0, set=0, clr=0, alt=gpio, desc=MQ_IRQ# -GPIO: 4, dir=0, set=0, clr=0, alt=gpio, desc=IRQ_ETH -GPIO: 5, dir=0, set=0, clr=0, alt=gpio, desc=IRQ_TOUCH# -GPIO: 6, dir=1, set=0, clr=0, alt=MMC clk, desc=MMC_CLK -GPIO: 7, dir=0, set=0, clr=0, alt=gpio, desc=PCC_S0_CD# -GPIO: 8, dir=0, set=0, clr=0, alt=gpio, desc=PCC_S1_CD# -GPIO: 9, dir=0, set=0, clr=0, alt=gpio, desc=MMC_CD# -GPIO: 10, dir=1, set=0, clr=1, alt=gpio, desc=GPIO_10/RTC_CLK/debug LED -GPIO: 11, dir=0, set=0, clr=0, alt=gpio, desc=3M6_CLK -GPIO: 12, dir=0, set=0, clr=0, alt=gpio, desc=GPIO_12/32K_CLK -GPIO: 13, dir=0, set=0, clr=0, alt=gpio, desc=MBGNT -GPIO: 14, dir=0, set=0, clr=0, alt=gpio, desc=MBREQ -GPIO: 15, dir=1, set=1, clr=0, alt=nCS_1, desc=CS1# -GPIO: 16, dir=1, set=0, clr=0, alt=PWM0, desc=PWM0 -GPIO: 17, dir=0, set=0, clr=0, alt=gpio, desc=IRQ_AXB -GPIO: 18, dir=0, set=0, clr=0, alt=RDY, desc=RDY -GPIO: 19, dir=0, set=0, clr=0, alt=gpio, desc=XB_DREQ1, PCC_SO_IRQ_O# -GPIO: 20, dir=0, set=0, clr=0, alt=gpio, desc=XB_DREQ0 -GPIO: 21, dir=0, set=0, clr=0, alt=gpio, desc=IRQ_IDE, PFI -GPIO: 22, dir=0, set=0, clr=0, alt=gpio, desc=Consumer IR, PCC_S1_IRQ_O# -GPIO: 23, dir=1, set=0, clr=1, alt=SSP SCLK, desc=SSP_SCLK -GPIO: 24, dir=1, set=0, clr=1, alt=SSP SFRM, desc=SSP_SFRM -GPIO: 25, dir=0, set=0, clr=0, alt=gpio, desc=SSP_TXD -GPIO: 26, dir=0, set=0, clr=0, alt=SSP RXD, desc=SSP_RXD -GPIO: 27, dir=0, set=0, clr=0, alt=gpio, desc=SSP_EXTCLK -GPIO: 28, dir=0, set=0, clr=0, alt=AC97 bitclk in, I2S bitclock out, desc=AC_BITCLK -GPIO: 29, dir=0, set=0, clr=0, alt=AC97 SDATA_IN0, desc=AUD_SDIN0 -GPIO: 30, dir=1, set=0, clr=0, alt=AC97 SDATA_OUT, desc=AC_SDOUT -GPIO: 31, dir=1, set=0, clr=0, alt=AC97 SYNC, desc=AC_SYNC -GPIO: 32, dir=0, set=0, clr=0, alt=gpio, desc=AUD_SDIN1 -GPIO: 33, dir=1, set=1, clr=0, alt=nCS_5, desc=CS5# -GPIO: 34, dir=0, set=0, clr=0, alt=FF RXD, desc=FF_RXD -GPIO: 35, dir=0, set=0, clr=0, alt=FF CTS, desc=FF_CTS -GPIO: 36, dir=0, set=0, clr=0, alt=FF DCD, desc=FF_DCD -GPIO: 37, dir=0, set=0, clr=0, alt=FF DSR, desc=FF_DSR -GPIO: 38, dir=0, set=0, clr=0, alt=FF RI, desc=FF_RI -GPIO: 39, dir=1, set=0, clr=0, alt=FF TXD, desc=FF_TXD -GPIO: 40, dir=1, set=0, clr=0, alt=FF DTR, desc=FF_DTR -GPIO: 41, dir=1, set=0, clr=0, alt=FF RTS, desc=FF_RTS -GPIO: 42, dir=0, set=0, clr=0, alt=BT RXD, desc=BT_RXD -GPIO: 43, dir=1, set=0, clr=0, alt=BT TXD, desc=BT_TXD -GPIO: 44, dir=0, set=0, clr=0, alt=BT CTS, desc=BT_CTS -GPIO: 45, dir=1, set=0, clr=0, alt=BT RTS, desc=BT_RTS -GPIO: 46, dir=0, set=0, clr=0, alt=STD RXD, desc=IR_RXD -GPIO: 47, dir=1, set=0, clr=0, alt=STD TXD, desc=IR_TXD -GPIO: 48, dir=1, set=1, clr=0, alt=nPOE, desc=PCC_OE# -GPIO: 49, dir=1, set=1, clr=0, alt=nPWE, desc=PCC_WE# -GPIO: 50, dir=1, set=1, clr=0, alt=nPIOR, desc=PCC_IOR# -GPIO: 51, dir=1, set=1, clr=0, alt=nPIOW, desc=PCC_IOW# -GPIO: 52, dir=1, set=1, clr=0, alt=nPCE[1], desc=PCC_CE1# -GPIO: 53, dir=1, set=1, clr=0, alt=nPCE[2], desc=PCC_CE2# -GPIO: 54, dir=1, set=0, clr=0, alt=nPSKSEL, desc=PCC_SCKSEL -GPIO: 55, dir=1, set=0, clr=0, alt=nPREG, desc=PCC_REG# -GPIO: 56, dir=0, set=0, clr=0, alt=nPWAIT, desc=PCC_WAIT# -GPIO: 57, dir=0, set=0, clr=0, alt=nIOIS16, desc=PCC_IOIS16# -GPIO: 58, dir=1, set=0, clr=0, alt=LDD[0], desc=LDD0 -GPIO: 59, dir=1, set=0, clr=0, alt=LDD[1], desc=LDD1 -GPIO: 60, dir=1, set=0, clr=0, alt=LDD[2], desc=LDD2 -GPIO: 61, dir=1, set=0, clr=0, alt=LDD[3], desc=LDD3 -GPIO: 62, dir=1, set=0, clr=0, alt=LDD[4], desc=LDD4 -GPIO: 63, dir=1, set=0, clr=0, alt=LDD[5], desc=LDD5 -GPIO: 64, dir=1, set=0, clr=0, alt=LDD[6], desc=LDD6 -GPIO: 65, dir=1, set=0, clr=0, alt=LDD[7], desc=LDD7 -GPIO: 66, dir=1, set=0, clr=0, alt=LDD[8], desc=LDD8 -GPIO: 67, dir=1, set=0, clr=0, alt=LDD[9], desc=LDD9 -GPIO: 68, dir=1, set=0, clr=0, alt=LDD[10], desc=LDD10 -GPIO: 69, dir=1, set=0, clr=0, alt=LDD[11], desc=LDD11 -GPIO: 70, dir=1, set=0, clr=0, alt=LDD[12], desc=LDD12 -GPIO: 71, dir=1, set=0, clr=0, alt=LDD[13], desc=LDD13 -GPIO: 72, dir=1, set=0, clr=0, alt=LDD[14], desc=LDD14 -GPIO: 73, dir=1, set=0, clr=0, alt=LDD[15], desc=LDD15 -GPIO: 74, dir=1, set=0, clr=0, alt=LCD_FCLK, desc=FCLK -GPIO: 75, dir=1, set=0, clr=0, alt=LCD_LCLK, desc=LCLK -GPIO: 76, dir=1, set=0, clr=0, alt=LCD_PCLK, desc=PCLK -GPIO: 77, dir=1, set=0, clr=0, alt=LCD_ACBIAS, desc=ACBIAS -GPIO: 78, dir=1, set=1, clr=0, alt=nCS_2, desc=CS2# -GPIO: 79, dir=1, set=1, clr=0, alt=nCS_3, desc=CS3# -GPIO: 80, dir=1, set=1, clr=0, alt=nCS_4, desc=CS4# -GPIO: 81, dir=0, set=0, clr=0, alt=gpio, desc= -GPIO: 82, dir=0, set=0, clr=0, alt=gpio, desc= -GPIO: 83, dir=0, set=0, clr=0, alt=gpio, desc= -GPIO: 84, dir=0, set=0, clr=0, alt=gpio, desc= diff --git a/board/pxa255_idp/pxa_reg_calcs.py b/board/pxa255_idp/pxa_reg_calcs.py deleted file mode 100644 index 4a721d1b04..0000000000 --- a/board/pxa255_idp/pxa_reg_calcs.py +++ /dev/null @@ -1,298 +0,0 @@ -#!/usr/bin/python - -# (C) Copyright 2004 -# BEC Systems -# Cliff Brake - -# SPDX-License-Identifier: GPL-2.0+ - -# calculations for PXA255 registers - -class gpio: - dir = '0' - set = '0' - clr = '0' - alt = '0' - desc = '' - - def __init__(self, dir=0, set=0, clr=0, alt=0, desc=''): - self.dir = dir - self.set = set - self.clr = clr - self.alt = alt - self.desc = desc - - -# the following is a dictionary of all GPIOs in the system -# the key is the GPIO number - - -pxa255_alt_func = { - 0: ['gpio', 'none', 'none', 'none'], - 1: ['gpio', 'gpio reset', 'none', 'none'], - 2: ['gpio', 'none', 'none', 'none'], - 3: ['gpio', 'none', 'none', 'none'], - 4: ['gpio', 'none', 'none', 'none'], - 5: ['gpio', 'none', 'none', 'none'], - 6: ['gpio', 'MMC clk', 'none', 'none'], - 7: ['gpio', '48MHz clock', 'none', 'none'], - 8: ['gpio', 'MMC CS0', 'none', 'none'], - 9: ['gpio', 'MMC CS1', 'none', 'none'], - 10: ['gpio', 'RTC Clock', 'none', 'none'], - 11: ['gpio', '3.6MHz', 'none', 'none'], - 12: ['gpio', '32KHz', 'none', 'none'], - 13: ['gpio', 'none', 'MBGNT', 'none'], - 14: ['gpio', 'MBREQ', 'none', 'none'], - 15: ['gpio', 'none', 'nCS_1', 'none'], - 16: ['gpio', 'none', 'PWM0', 'none'], - 17: ['gpio', 'none', 'PWM1', 'none'], - 18: ['gpio', 'RDY', 'none', 'none'], - 19: ['gpio', 'DREQ[1]', 'none', 'none'], - 20: ['gpio', 'DREQ[0]', 'none', 'none'], - 21: ['gpio', 'none', 'none', 'none'], - 22: ['gpio', 'none', 'none', 'none'], - 23: ['gpio', 'none', 'SSP SCLK', 'none'], - 24: ['gpio', 'none', 'SSP SFRM', 'none'], - 25: ['gpio', 'none', 'SSP TXD', 'none'], - 26: ['gpio', 'SSP RXD', 'none', 'none'], - 27: ['gpio', 'SSP EXTCLK', 'none', 'none'], - 28: ['gpio', 'AC97 bitclk in, I2S bitclock out', 'I2S bitclock in', 'none'], - 29: ['gpio', 'AC97 SDATA_IN0', 'I2S SDATA_IN', 'none'], - 30: ['gpio', 'I2S SDATA_OUT', 'AC97 SDATA_OUT', 'none'], - 31: ['gpio', 'I2S SYNC', 'AC97 SYNC', 'none'], - 32: ['gpio', 'AC97 SDATA_IN1', 'I2S SYSCLK', 'none'], - 33: ['gpio', 'none', 'nCS_5', 'none'], - 34: ['gpio', 'FF RXD', 'MMC CS0', 'none'], - 35: ['gpio', 'FF CTS', 'none', 'none'], - 36: ['gpio', 'FF DCD', 'none', 'none'], - 37: ['gpio', 'FF DSR', 'none', 'none'], - 38: ['gpio', 'FF RI', 'none', 'none'], - 39: ['gpio', 'MMC CS1', 'FF TXD', 'none'], - 40: ['gpio', 'none', 'FF DTR', 'none'], - 41: ['gpio', 'none', 'FF RTS', 'none'], - 42: ['gpio', 'BT RXD', 'none', 'HW RXD'], - 43: ['gpio', 'none', 'BT TXD', 'HW TXD'], - 44: ['gpio', 'BT CTS', 'none', 'HW CTS'], - 45: ['gpio', 'none', 'BT RTS', 'HW RTS'], - 46: ['gpio', 'ICP_RXD', 'STD RXD', 'none'], - 47: ['gpio', 'STD TXD', 'ICP_TXD', 'none'], - 48: ['gpio', 'HW TXD', 'nPOE', 'none'], - 49: ['gpio', 'HW RXD', 'nPWE', 'none'], - 50: ['gpio', 'HW CTS', 'nPIOR', 'none'], - 51: ['gpio', 'nPIOW', 'HW RTS', 'none'], - 52: ['gpio', 'none', 'nPCE[1]', 'none'], - 53: ['gpio', 'MMC CLK', 'nPCE[2]', 'none'], - 54: ['gpio', 'MMC CLK', 'nPSKSEL', 'none'], - 55: ['gpio', 'none', 'nPREG', 'none'], - 56: ['gpio', 'nPWAIT', 'none', 'none'], - 57: ['gpio', 'nIOIS16', 'none', 'none'], - 58: ['gpio', 'none', 'LDD[0]', 'none'], - 59: ['gpio', 'none', 'LDD[1]', 'none'], - 60: ['gpio', 'none', 'LDD[2]', 'none'], - 61: ['gpio', 'none', 'LDD[3]', 'none'], - 62: ['gpio', 'none', 'LDD[4]', 'none'], - 63: ['gpio', 'none', 'LDD[5]', 'none'], - 64: ['gpio', 'none', 'LDD[6]', 'none'], - 65: ['gpio', 'none', 'LDD[7]', 'none'], - 66: ['gpio', 'MBREQ', 'LDD[8]', 'none'], - 67: ['gpio', 'MMC CS0', 'LDD[9]', 'none'], - 68: ['gpio', 'MMC CS1', 'LDD[10]', 'none'], - 69: ['gpio', 'MMC CLK', 'LDD[11]', 'none'], - 70: ['gpio', 'RTC CLK', 'LDD[12]', 'none'], - 71: ['gpio', '3.6 MHz', 'LDD[13]', 'none'], - 72: ['gpio', '32 KHz', 'LDD[14]', 'none'], - 73: ['gpio', 'MBGNT', 'LDD[15]', 'none'], - 74: ['gpio', 'none', 'LCD_FCLK', 'none'], - 75: ['gpio', 'none', 'LCD_LCLK', 'none'], - 76: ['gpio', 'none', 'LCD_PCLK', 'none'], - 77: ['gpio', 'none', 'LCD_ACBIAS', 'none'], - 78: ['gpio', 'none', 'nCS_2', 'none'], - 79: ['gpio', 'none', 'nCS_3', 'none'], - 80: ['gpio', 'none', 'nCS_4', 'none'], - 81: ['gpio', 'NSSPSCLK', 'none', 'none'], - 82: ['gpio', 'NSSPSFRM', 'none', 'none'], - 83: ['gpio', 'NSSPTXD', 'NSSPRXD', 'none'], - 84: ['gpio', 'NSSPTXD', 'NSSPRXD', 'none'], -} - - -#def __init__(self, dir=0, set=0, clr=0, alt=0, desc=''): - -gpio_list = [] - -for i in range(0,85): - gpio_list.append(gpio()) - -#chip select GPIOs -gpio_list[18] = gpio(0, 0, 0, 1, 'RDY') -gpio_list[33] = gpio(1, 1, 0, 2, 'CS5#') -gpio_list[80] = gpio(1, 1, 0, 2, 'CS4#') -gpio_list[79] = gpio(1, 1, 0, 2, 'CS3#') -gpio_list[78] = gpio(1, 1, 0, 2, 'CS2#') -gpio_list[15] = gpio(1, 1, 0, 2, 'CS1#') -gpio_list[22] = gpio(0, 0, 0, 0, 'Consumer IR, PCC_S1_IRQ_O#') -gpio_list[21] = gpio(0, 0, 0, 0, 'IRQ_IDE, PFI') -gpio_list[19] = gpio(0, 0, 0, 0, 'XB_DREQ1, PCC_SO_IRQ_O#') -gpio_list[20] = gpio(0, 0, 0, 0, 'XB_DREQ0') -gpio_list[20] = gpio(0, 0, 0, 0, 'XB_DREQ0') -gpio_list[17] = gpio(0, 0, 0, 0, 'IRQ_AXB') -gpio_list[16] = gpio(1, 0, 0, 2, 'PWM0') - -# PCMCIA stuff -gpio_list[57] = gpio(0, 0, 0, 1, 'PCC_IOIS16#') -gpio_list[56] = gpio(0, 0, 0, 1, 'PCC_WAIT#') -gpio_list[55] = gpio(1, 0, 0, 2, 'PCC_REG#') -gpio_list[54] = gpio(1, 0, 0, 2, 'PCC_SCKSEL') -gpio_list[53] = gpio(1, 1, 0, 2, 'PCC_CE2#') -gpio_list[52] = gpio(1, 1, 0, 2, 'PCC_CE1#') -gpio_list[51] = gpio(1, 1, 0, 1, 'PCC_IOW#') -gpio_list[50] = gpio(1, 1, 0, 2, 'PCC_IOR#') -gpio_list[49] = gpio(1, 1, 0, 2, 'PCC_WE#') -gpio_list[48] = gpio(1, 1, 0, 2, 'PCC_OE#') - -# SSP port -gpio_list[26] = gpio(0, 0, 0, 1, 'SSP_RXD') -gpio_list[25] = gpio(0, 0, 0, 0, 'SSP_TXD') -gpio_list[24] = gpio(1, 0, 1, 2, 'SSP_SFRM') -gpio_list[23] = gpio(1, 0, 1, 2, 'SSP_SCLK') -gpio_list[27] = gpio(0, 0, 0, 0, 'SSP_EXTCLK') - -# audio codec -gpio_list[32] = gpio(0, 0, 0, 0, 'AUD_SDIN1') -gpio_list[31] = gpio(1, 0, 0, 2, 'AC_SYNC') -gpio_list[30] = gpio(1, 0, 0, 2, 'AC_SDOUT') -gpio_list[29] = gpio(0, 0, 0, 1, 'AUD_SDIN0') -gpio_list[28] = gpio(0, 0, 0, 1, 'AC_BITCLK') - -# serial ports -gpio_list[39] = gpio(1, 0, 0, 2, 'FF_TXD') -gpio_list[34] = gpio(0, 0, 0, 1, 'FF_RXD') -gpio_list[41] = gpio(1, 0, 0, 2, 'FF_RTS') -gpio_list[35] = gpio(0, 0, 0, 1, 'FF_CTS') -gpio_list[40] = gpio(1, 0, 0, 2, 'FF_DTR') -gpio_list[37] = gpio(0, 0, 0, 1, 'FF_DSR') -gpio_list[38] = gpio(0, 0, 0, 1, 'FF_RI') -gpio_list[36] = gpio(0, 0, 0, 1, 'FF_DCD') - -gpio_list[43] = gpio(1, 0, 0, 2, 'BT_TXD') -gpio_list[42] = gpio(0, 0, 0, 1, 'BT_RXD') -gpio_list[45] = gpio(1, 0, 0, 2, 'BT_RTS') -gpio_list[44] = gpio(0, 0, 0, 1, 'BT_CTS') - -gpio_list[47] = gpio(1, 0, 0, 1, 'IR_TXD') -gpio_list[46] = gpio(0, 0, 0, 2, 'IR_RXD') - -# misc GPIO signals -gpio_list[14] = gpio(0, 0, 0, 0, 'MBREQ') -gpio_list[13] = gpio(0, 0, 0, 0, 'MBGNT') -gpio_list[12] = gpio(0, 0, 0, 0, 'GPIO_12/32K_CLK') -gpio_list[11] = gpio(0, 0, 0, 0, '3M6_CLK') -gpio_list[10] = gpio(1, 0, 1, 0, 'GPIO_10/RTC_CLK/debug LED') -gpio_list[9] = gpio(0, 0, 0, 0, 'MMC_CD#') -gpio_list[8] = gpio(0, 0, 0, 0, 'PCC_S1_CD#') -gpio_list[7] = gpio(0, 0, 0, 0, 'PCC_S0_CD#') -gpio_list[6] = gpio(1, 0, 0, 1, 'MMC_CLK') -gpio_list[5] = gpio(0, 0, 0, 0, 'IRQ_TOUCH#') -gpio_list[4] = gpio(0, 0, 0, 0, 'IRQ_ETH') -gpio_list[3] = gpio(0, 0, 0, 0, 'MQ_IRQ#') -gpio_list[2] = gpio(0, 0, 0, 0, 'BAT_DATA') -gpio_list[1] = gpio(0, 0, 0, 1, 'USER_RESET#') -gpio_list[0] = gpio(0, 0, 0, 1, 'USER_RESET#') - -# LCD GPIOs -gpio_list[58] = gpio(1, 0, 0, 2, 'LDD0') -gpio_list[59] = gpio(1, 0, 0, 2, 'LDD1') -gpio_list[60] = gpio(1, 0, 0, 2, 'LDD2') -gpio_list[61] = gpio(1, 0, 0, 2, 'LDD3') -gpio_list[62] = gpio(1, 0, 0, 2, 'LDD4') -gpio_list[63] = gpio(1, 0, 0, 2, 'LDD5') -gpio_list[64] = gpio(1, 0, 0, 2, 'LDD6') -gpio_list[65] = gpio(1, 0, 0, 2, 'LDD7') -gpio_list[66] = gpio(1, 0, 0, 2, 'LDD8') -gpio_list[67] = gpio(1, 0, 0, 2, 'LDD9') -gpio_list[68] = gpio(1, 0, 0, 2, 'LDD10') -gpio_list[69] = gpio(1, 0, 0, 2, 'LDD11') -gpio_list[70] = gpio(1, 0, 0, 2, 'LDD12') -gpio_list[71] = gpio(1, 0, 0, 2, 'LDD13') -gpio_list[72] = gpio(1, 0, 0, 2, 'LDD14') -gpio_list[73] = gpio(1, 0, 0, 2, 'LDD15') -gpio_list[74] = gpio(1, 0, 0, 2, 'FCLK') -gpio_list[75] = gpio(1, 0, 0, 2, 'LCLK') -gpio_list[76] = gpio(1, 0, 0, 2, 'PCLK') -gpio_list[77] = gpio(1, 0, 0, 2, 'ACBIAS') - -# calculate registers -pxa_regs = { - 'gpdr0':0, 'gpdr1':0, 'gpdr2':0, - 'gpsr0':0, 'gpsr1':0, 'gpsr2':0, - 'gpcr0':0, 'gpcr1':0, 'gpcr2':0, - 'gafr0_l':0, 'gafr0_u':0, - 'gafr1_l':0, 'gafr1_u':0, - 'gafr2_l':0, 'gafr2_u':0, -} - -# U-boot define names -uboot_reg_names = { - 'gpdr0':'CONFIG_SYS_GPDR0_VAL', 'gpdr1':'CONFIG_SYS_GPDR1_VAL', 'gpdr2':'CONFIG_SYS_GPDR2_VAL', - 'gpsr0':'CONFIG_SYS_GPSR0_VAL', 'gpsr1':'CONFIG_SYS_GPSR1_VAL', 'gpsr2':'CONFIG_SYS_GPSR2_VAL', - 'gpcr0':'CONFIG_SYS_GPCR0_VAL', 'gpcr1':'CONFIG_SYS_GPCR1_VAL', 'gpcr2':'CONFIG_SYS_GPCR2_VAL', - 'gafr0_l':'CONFIG_SYS_GAFR0_L_VAL', 'gafr0_u':'CONFIG_SYS_GAFR0_U_VAL', - 'gafr1_l':'CONFIG_SYS_GAFR1_L_VAL', 'gafr1_u':'CONFIG_SYS_GAFR1_U_VAL', - 'gafr2_l':'CONFIG_SYS_GAFR2_L_VAL', 'gafr2_u':'CONFIG_SYS_GAFR2_U_VAL', -} - -# bit mappings - -bit_mappings = [ - -{ 'gpio':(0,32), 'shift':1, 'regs':{'dir':'gpdr0', 'set':'gpsr0', 'clr':'gpcr0'} }, -{ 'gpio':(32,64), 'shift':1, 'regs':{'dir':'gpdr1', 'set':'gpsr1', 'clr':'gpcr1'} }, -{ 'gpio':(64,85), 'shift':1, 'regs':{'dir':'gpdr2', 'set':'gpsr2', 'clr':'gpcr2'} }, -{ 'gpio':(0,16), 'shift':2, 'regs':{'alt':'gafr0_l'} }, -{ 'gpio':(16,32), 'shift':2, 'regs':{'alt':'gafr0_u'} }, -{ 'gpio':(32,48), 'shift':2, 'regs':{'alt':'gafr1_l'} }, -{ 'gpio':(48,64), 'shift':2, 'regs':{'alt':'gafr1_u'} }, -{ 'gpio':(64,80), 'shift':2, 'regs':{'alt':'gafr2_l'} }, -{ 'gpio':(80,85), 'shift':2, 'regs':{'alt':'gafr2_u'} }, - -] - -def stuff_bits(bit_mapping, gpio_list): - gpios = range( bit_mapping['gpio'][0], bit_mapping['gpio'][1]) - - for gpio in gpios: - for reg in bit_mapping['regs'].keys(): - value = eval( 'gpio_list[gpio].%s' % (reg) ) - if ( value ): - # we have a high bit - bit_shift = (gpio - bit_mapping['gpio'][0]) * bit_mapping['shift'] - bit = value << (bit_shift) - pxa_regs[bit_mapping['regs'][reg]] |= bit - -for i in bit_mappings: - stuff_bits(i, gpio_list) - -# now print out all regs -registers = pxa_regs.keys() -registers.sort() -for reg in registers: - print '%s: 0x%x' % (reg, pxa_regs[reg]) - -# print define to past right into U-Boot source code - -print -print - -for reg in registers: - print '#define %s 0x%x' % (uboot_reg_names[reg], pxa_regs[reg]) - -# print all GPIOS -print -print - -for i in range(len(gpio_list)): - gpio_i = gpio_list[i] - alt_func_desc = pxa255_alt_func[i][gpio_i.alt] - print 'GPIO: %i, dir=%i, set=%i, clr=%i, alt=%s, desc=%s' % (i, gpio_i.dir, gpio_i.set, gpio_i.clr, alt_func_desc, gpio_i.desc) - - diff --git a/board/zipitz2/Kconfig b/board/zipitz2/Kconfig deleted file mode 100644 index c6635040a3..0000000000 --- a/board/zipitz2/Kconfig +++ /dev/null @@ -1,9 +0,0 @@ -if TARGET_ZIPITZ2 - -config SYS_BOARD - default "zipitz2" - -config SYS_CONFIG_NAME - default "zipitz2" - -endif diff --git a/board/zipitz2/MAINTAINERS b/board/zipitz2/MAINTAINERS deleted file mode 100644 index 55b0f6406c..0000000000 --- a/board/zipitz2/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -ZIPITZ2 BOARD -M: Marek Vasut -S: Maintained -F: board/zipitz2/ -F: include/configs/zipitz2.h -F: configs/zipitz2_defconfig diff --git a/board/zipitz2/Makefile b/board/zipitz2/Makefile deleted file mode 100644 index 855f6bcda8..0000000000 --- a/board/zipitz2/Makefile +++ /dev/null @@ -1,10 +0,0 @@ -# -# Copyright (C) 2009 -# Marek Vasut -# -# Heavily based on pxa255_idp platform -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := zipitz2.o diff --git a/board/zipitz2/zipitz2.c b/board/zipitz2/zipitz2.c deleted file mode 100644 index 90bba6a5fc..0000000000 --- a/board/zipitz2/zipitz2.c +++ /dev/null @@ -1,202 +0,0 @@ -/* - * Copyright (C) 2009 - * Marek Vasut - * - * Heavily based on pxa255_idp platform - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -DECLARE_GLOBAL_DATA_PTR; - -#ifdef CONFIG_CMD_SPI -void lcd_start(void); -#else -inline void lcd_start(void) {}; -#endif - -/* - * Miscelaneous platform dependent initialisations - */ - -int board_init (void) -{ - /* We have RAM, disable cache */ - dcache_disable(); - icache_disable(); - - /* arch number of Z2 */ - gd->bd->bi_arch_number = MACH_TYPE_ZIPIT2; - - /* adress of boot parameters */ - gd->bd->bi_boot_params = 0xa0000100; - - /* Enable LCD */ - lcd_start(); - - return 0; -} - -int dram_init(void) -{ - pxa2xx_dram_init(); - gd->ram_size = PHYS_SDRAM_1_SIZE; - return 0; -} - -void dram_init_banksize(void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; -} - -#ifdef CONFIG_CMD_MMC -int board_mmc_init(bd_t *bis) -{ - pxa_mmc_register(0); - return 0; -} -#endif - -#ifdef CONFIG_CMD_SPI - -struct { - unsigned char reg; - unsigned short data; - unsigned char mdelay; -} lcd_data[] = { - { 0x07, 0x0000, 0 }, - { 0x13, 0x0000, 10 }, - { 0x11, 0x3004, 0 }, - { 0x14, 0x200F, 0 }, - { 0x10, 0x1a20, 0 }, - { 0x13, 0x0040, 50 }, - { 0x13, 0x0060, 0 }, - { 0x13, 0x0070, 200 }, - { 0x01, 0x0127, 0 }, - { 0x02, 0x0700, 0 }, - { 0x03, 0x1030, 0 }, - { 0x08, 0x0208, 0 }, - { 0x0B, 0x0620, 0 }, - { 0x0C, 0x0110, 0 }, - { 0x30, 0x0120, 0 }, - { 0x31, 0x0127, 0 }, - { 0x32, 0x0000, 0 }, - { 0x33, 0x0503, 0 }, - { 0x34, 0x0727, 0 }, - { 0x35, 0x0124, 0 }, - { 0x36, 0x0706, 0 }, - { 0x37, 0x0701, 0 }, - { 0x38, 0x0F00, 0 }, - { 0x39, 0x0F00, 0 }, - { 0x40, 0x0000, 0 }, - { 0x41, 0x0000, 0 }, - { 0x42, 0x013f, 0 }, - { 0x43, 0x0000, 0 }, - { 0x44, 0x013f, 0 }, - { 0x45, 0x0000, 0 }, - { 0x46, 0xef00, 0 }, - { 0x47, 0x013f, 0 }, - { 0x48, 0x0000, 0 }, - { 0x07, 0x0015, 30 }, - { 0x07, 0x0017, 0 }, - { 0x20, 0x0000, 0 }, - { 0x21, 0x0000, 0 }, - { 0x22, 0x0000, 0 }, -}; - -void zipitz2_spi_sda(int set) -{ - /* GPIO 13 */ - if (set) - writel((1 << 13), GPSR0); - else - writel((1 << 13), GPCR0); -} - -void zipitz2_spi_scl(int set) -{ - /* GPIO 22 */ - if (set) - writel((1 << 22), GPCR0); - else - writel((1 << 22), GPSR0); -} - -unsigned char zipitz2_spi_read(void) -{ - /* GPIO 40 */ - return !!(readl(GPLR1) & (1 << 8)); -} - -int spi_cs_is_valid(unsigned int bus, unsigned int cs) -{ - /* Always valid */ - return 1; -} - -void spi_cs_activate(struct spi_slave *slave) -{ - /* GPIO 88 low */ - writel((1 << 24), GPCR2); -} - -void spi_cs_deactivate(struct spi_slave *slave) -{ - /* GPIO 88 high */ - writel((1 << 24), GPSR2); - -} - -void lcd_start(void) -{ - int i; - unsigned char reg[3] = { 0x74, 0x00, 0 }; - unsigned char data[3] = { 0x76, 0, 0 }; - unsigned char dummy[3] = { 0, 0, 0 }; - - /* PWM2 AF */ - writel(readl(GAFR0_L) | 0x00800000, GAFR0_L); - /* Enable clock to all PWM */ - writel(readl(CKEN) | 0x3, CKEN); - /* Configure PWM2 */ - writel(0x4f, PWM_CTRL2); - writel(0x2ff, PWM_PWDUTY2); - writel(792, PWM_PERVAL2); - - /* Toggle the reset pin to reset the LCD */ - writel((1 << 19), GPSR0); - udelay(100000); - writel((1 << 19), GPCR0); - udelay(20000); - writel((1 << 19), GPSR0); - udelay(20000); - - /* Program the LCD init sequence */ - for (i = 0; i < sizeof(lcd_data) / sizeof(lcd_data[0]); i++) { - reg[0] = 0x74; - reg[1] = 0x0; - reg[2] = lcd_data[i].reg; - spi_xfer(NULL, 24, reg, dummy, SPI_XFER_BEGIN | SPI_XFER_END); - - data[0] = 0x76; - data[1] = lcd_data[i].data >> 8; - data[2] = lcd_data[i].data & 0xff; - spi_xfer(NULL, 24, data, dummy, SPI_XFER_BEGIN | SPI_XFER_END); - - if (lcd_data[i].mdelay) - udelay(lcd_data[i].mdelay * 1000); - } - - writel((1 << 11), GPSR0); -} -#endif diff --git a/configs/pxa255_idp_defconfig b/configs/pxa255_idp_defconfig deleted file mode 100644 index c7be4e9b33..0000000000 --- a/configs/pxa255_idp_defconfig +++ /dev/null @@ -1,3 +0,0 @@ -CONFIG_ARM=y -CONFIG_TARGET_PXA255_IDP=y -# CONFIG_CMD_SETEXPR is not set diff --git a/configs/zipitz2_defconfig b/configs/zipitz2_defconfig deleted file mode 100644 index 2977ccc8dd..0000000000 --- a/configs/zipitz2_defconfig +++ /dev/null @@ -1,7 +0,0 @@ -CONFIG_ARM=y -CONFIG_TARGET_ZIPITZ2=y -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NET is not set -# CONFIG_CMD_NFS is not set -CONFIG_SYS_PROMPT="$ " diff --git a/include/configs/pxa255_idp.h b/include/configs/pxa255_idp.h deleted file mode 100644 index 332d79f89f..0000000000 --- a/include/configs/pxa255_idp.h +++ /dev/null @@ -1,335 +0,0 @@ -/* - * (C) Copyright 2002 - * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH - * Marius Groeger - * - * Copied from lubbock.h - * - * (C) Copyright 2004 - * BEC Systems - * Cliff Brake - * Configuation settings for the Accelent/Vibren PXA255 IDP - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#include - -/* - * If we are developing, we might want to start U-Boot from RAM - * so we MUST NOT initialize critical regs like mem-timing ... - */ -#undef CONFIG_SKIP_LOWLEVEL_INIT /* define for developing */ -#define CONFIG_SYS_TEXT_BASE 0x0 - -/* - * define the following to enable debug blinks. A debug blink function - * must be defined in memsetup.S - */ -#undef DEBUG_BLINK_ENABLE -#undef DEBUG_BLINKC_ENABLE - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_CPU_PXA25X 1 /* This is an PXA250 CPU */ - -#undef CONFIG_LCD -#ifdef CONFIG_LCD -#define CONFIG_PXA_LCD -#define CONFIG_SHARP_LM8V31 -#endif - -#define CONFIG_MMC 1 -#define CONFIG_DOS_PARTITION 1 -#define CONFIG_BOARD_LATE_INIT - -/* we will never enable dcache, because we have to setup MMU first */ -#define CONFIG_SYS_DCACHE_OFF - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) - -/* - * PXA250 IDP memory map information - */ - -#define IDP_CS5_ETH_OFFSET 0x03400000 - - -/* - * Hardware drivers - */ -#define CONFIG_SMC91111 -#define CONFIG_SMC91111_BASE (PXA_CS5_PHYS + IDP_CS5_ETH_OFFSET + 0x300) -#define CONFIG_SMC_USE_32_BIT 1 -/* #define CONFIG_SMC_USE_IOFUNCS */ - -/* the following has to be set high -- suspect something is wrong with - * with the tftp timeout routines. FIXME!!! - */ -#define CONFIG_NET_RETRY_COUNT 100 - -/* - * select serial console configuration - */ -#define CONFIG_PXA_SERIAL -#define CONFIG_FFUART 1 /* we use FFUART on LUBBOCK */ -#define CONFIG_CONS_INDEX 3 - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_BAUDRATE 115200 - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#define CONFIG_CMD_FAT -#define CONFIG_CMD_DHCP - -#define CONFIG_BOOTDELAY 3 -#define CONFIG_BOOTCOMMAND "bootm 40000" -#define CONFIG_BOOTARGS "root=/dev/mtdblock2 rootfstype=cramfs console=ttyS0,115200" - -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -/* #define CONFIG_INITRD_TAG 1 */ - -/* - * Current memory map for Vibren supplied Linux images: - * - * Flash: - * 0 - 0x3ffff (size = 0x40000): bootloader - * 0x40000 - 0x13ffff (size = 0x100000): kernel - * 0x140000 - 0x1f3ffff (size = 0x1e00000): jffs - * - * RAM: - * 0xa0008000 - kernel is loaded - * 0xa3000000 - Uboot runs (48MB into RAM) - * - */ - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "prog_boot_mmc=" \ - "mw.b 0xa0000000 0xff 0x40000; " \ - "if mmcinit && " \ - "fatload mmc 0 0xa0000000 u-boot.bin; " \ - "then " \ - "protect off 0x0 0x3ffff; " \ - "erase 0x0 0x3ffff; " \ - "cp.b 0xa0000000 0x0 0x40000; " \ - "reset;" \ - "fi\0" \ - "prog_uzImage_mmc=" \ - "mw.b 0xa0000000 0xff 0x100000; " \ - "if mmcinit && " \ - "fatload mmc 0 0xa0000000 uzImage; " \ - "then " \ - "protect off 0x40000 0xfffff; " \ - "erase 0x40000 0xfffff; " \ - "cp.b 0xa0000000 0x40000 0x100000; " \ - "fi\0" \ - "prog_jffs_mmc=" \ - "mw.b 0xa0000000 0xff 0x1e00000; " \ - "if mmcinit && " \ - "fatload mmc 0 0xa0000000 root.jffs; " \ - "then " \ - "protect off 0x140000 0x1f3ffff; " \ - "erase 0x140000 0x1f3ffff; " \ - "cp.b 0xa0000000 0x140000 0x1e00000; " \ - "fi\0" \ - "boot_mmc=" \ - "if mmcinit && " \ - "fatload mmc 0 0xa1000000 uzImage && " \ - "then " \ - "bootm 0xa1000000; " \ - "fi\0" \ - "prog_boot_net=" \ - "mw.b 0xa0000000 0xff 0x100000; " \ - "if bootp 0xa0000000 u-boot.bin; " \ - "then " \ - "protect off 0x0 0x3ffff; " \ - "erase 0x0 0x3ffff; " \ - "cp.b 0xa0000000 0x0 0x40000; " \ - "reset; " \ - "fi\0" \ - "prog_uzImage_net=" \ - "mw.b 0xa0000000 0xff 0x100000; " \ - "if bootp 0xa0000000 uzImage; " \ - "then " \ - "protect off 0x40000 0xfffff; " \ - "erase 0x40000 0xfffff; " \ - "cp.b 0xa0000000 0x40000 0x100000; " \ - "fi\0" \ - "prog_jffs_net=" \ - "mw.b 0xa0000000 0xff 0x1e00000; " \ - "if bootp 0xa0000000 root.jffs; " \ - "then " \ - "protect off 0x140000 0x1f3ffff; " \ - "erase 0x140000 0x1f3ffff; " \ - "cp.b 0xa0000000 0x140000 0x1e00000; " \ - "fi\0" - - -/* "erase_env=" */ -/* "protect off" */ - - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ -#endif - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_HUSH_PARSER 1 - -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#undef CONFIG_SYS_PROMPT -#ifdef CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT "$ " /* Monitor Command Prompt */ -#else -#endif -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_DEVICE_NULLDEV 1 - -#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0xa0800000 /* default load address */ - -#define CONFIG_SYS_CPUSPEED 0x161 /* set core clock to 400/200/100 MHz */ - -#define RTC 1 /* enable 32KHz osc */ - -#ifdef CONFIG_MMC -#define CONFIG_GENERIC_MMC -#define CONFIG_PXA_MMC_GENERIC -#define CONFIG_CMD_MMC -#define CONFIG_SYS_MMC_BASE 0xF0000000 -#endif - -/* - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ -#define PHYS_SDRAM_2 0xa4000000 /* SDRAM Bank #2 */ -#define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 MB */ -#define PHYS_SDRAM_3 0xa8000000 /* SDRAM Bank #3 */ -#define PHYS_SDRAM_3_SIZE 0x00000000 /* 0 MB */ -#define PHYS_SDRAM_4 0xac000000 /* SDRAM Bank #4 */ -#define PHYS_SDRAM_4_SIZE 0x00000000 /* 0 MB */ - -#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ -#define PHYS_FLASH_2 0x04000000 /* Flash Bank #2 */ -#define PHYS_FLASH_SIZE 0x02000000 /* 32 MB */ -#define PHYS_FLASH_BANK_SIZE 0x02000000 /* 32 MB Banks */ -#define PHYS_FLASH_SECT_SIZE 0x00040000 /* 256 KB sectors (x2) */ - -#define CONFIG_SYS_DRAM_BASE 0xa0000000 -#define CONFIG_SYS_DRAM_SIZE 0x04000000 - -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR 0xfffff800 - -/* - * GPIO settings - */ - -#define CONFIG_SYS_GAFR0_L_VAL 0x80001005 -#define CONFIG_SYS_GAFR0_U_VAL 0xa5128012 -#define CONFIG_SYS_GAFR1_L_VAL 0x699a9558 -#define CONFIG_SYS_GAFR1_U_VAL 0xaaa5aa6a -#define CONFIG_SYS_GAFR2_L_VAL 0xaaaaaaaa -#define CONFIG_SYS_GAFR2_U_VAL 0x2 -#define CONFIG_SYS_GPCR0_VAL 0x1800400 -#define CONFIG_SYS_GPCR1_VAL 0x0 -#define CONFIG_SYS_GPCR2_VAL 0x0 -#define CONFIG_SYS_GPDR0_VAL 0xc1818440 -#define CONFIG_SYS_GPDR1_VAL 0xfcffab82 -#define CONFIG_SYS_GPDR2_VAL 0x1ffff -#define CONFIG_SYS_GPSR0_VAL 0x8000 -#define CONFIG_SYS_GPSR1_VAL 0x3f0002 -#define CONFIG_SYS_GPSR2_VAL 0x1c000 - -#define CONFIG_SYS_PSSR_VAL 0x20 - -#define CONFIG_SYS_CCCR CCCR_L27|CCCR_M2|CCCR_N10 -#define CONFIG_SYS_CKEN 0x0 - -/* - * Memory settings - */ -#define CONFIG_SYS_MSC0_VAL 0x29DCA4D2 -#define CONFIG_SYS_MSC1_VAL 0x43AC494C -#define CONFIG_SYS_MSC2_VAL 0x39D449D4 -#define CONFIG_SYS_MDCNFG_VAL 0x090009C9 -#define CONFIG_SYS_MDREFR_VAL 0x0085C017 -#define CONFIG_SYS_MDMRS_VAL 0x00220022 -#define CONFIG_SYS_FLYCNFG_VAL 0x00000000 -#define CONFIG_SYS_SXCNFG_VAL 0x00000000 - -/* - * PCMCIA and CF Interfaces - */ -#define CONFIG_SYS_MECR_VAL 0x00000003 -#define CONFIG_SYS_MCMEM0_VAL 0x00014405 -#define CONFIG_SYS_MCMEM1_VAL 0x00014405 -#define CONFIG_SYS_MCATT0_VAL 0x00014405 -#define CONFIG_SYS_MCATT1_VAL 0x00014405 -#define CONFIG_SYS_MCIO0_VAL 0x00014405 -#define CONFIG_SYS_MCIO1_VAL 0x00014405 - -/* - * FLASH and environment organization - */ -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_FLASH_CFI_DRIVER 1 - -#define CONFIG_SYS_MONITOR_BASE 0 -#define CONFIG_SYS_MONITOR_LEN PHYS_FLASH_SECT_SIZE - -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ - -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 - -/* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (25*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (25*CONFIG_SYS_HZ) /* Timeout for Flash Write */ - -/* put cfg at end of flash for now */ -#define CONFIG_ENV_IS_IN_FLASH 1 - /* Addr of Environment Sector */ -#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + PHYS_FLASH_SIZE - 0x40000) -#define CONFIG_ENV_SIZE PHYS_FLASH_SECT_SIZE /* Total Size of Environment Sector */ -#define CONFIG_ENV_SECT_SIZE (PHYS_FLASH_SECT_SIZE / 16) - -#endif /* __CONFIG_H */ diff --git a/include/configs/zipitz2.h b/include/configs/zipitz2.h deleted file mode 100644 index 0199190eb8..0000000000 --- a/include/configs/zipitz2.h +++ /dev/null @@ -1,238 +0,0 @@ -/* - * Aeronix Zipit Z2 configuration file - * - * Copyright (C) 2009-2010 Marek Vasut - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Board Configuration Options - */ -#define CONFIG_CPU_PXA27X 1 /* Marvell PXA270 CPU */ -#define CONFIG_ZIPITZ2 1 /* Zipit Z2 board */ -#define CONFIG_SYS_TEXT_BASE 0x0 - -#undef CONFIG_BOARD_LATE_INIT -#undef CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_PREBOOT - -/* - * Environment settings - */ -#define CONFIG_ENV_OVERWRITE -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_ADDR 0x40000 -#define CONFIG_ENV_SIZE 0x20000 - -/* we will never enable dcache, because we have to setup MMU first */ -#define CONFIG_SYS_DCACHE_OFF - -#define CONFIG_SYS_MALLOC_LEN (128*1024) -#define CONFIG_ARCH_CPU_INIT - -#define CONFIG_BOOTCOMMAND \ - "if mmc rescan && ext2load mmc 0 0xa0000000 boot/uboot.script ;"\ - "then " \ - "source 0xa0000000; " \ - "else " \ - "bootm 0x60000; " \ - "fi; " -#define CONFIG_BOOTARGS \ - "console=tty0 console=ttyS2,115200 fbcon=rotate:3" -#define CONFIG_TIMESTAMP -#define CONFIG_BOOTDELAY 2 /* Autoboot delay */ -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_SYS_TEXT_BASE 0x0 -#define CONFIG_LZMA /* LZMA compression support */ - -/* - * Serial Console Configuration - * STUART - the lower serial port on Colibri board - */ -#define CONFIG_PXA_SERIAL -#define CONFIG_STUART 1 -#define CONFIG_CONS_INDEX 2 -#define CONFIG_BAUDRATE 115200 - -/* - * Bootloader Components Configuration - */ -#define CONFIG_CMD_ENV -#define CONFIG_CMD_MMC -#define CONFIG_CMD_SPI - -/* - * MMC Card Configuration - */ -#ifdef CONFIG_CMD_MMC -#define CONFIG_MMC -#define CONFIG_GENERIC_MMC -#define CONFIG_PXA_MMC_GENERIC -#define CONFIG_SYS_MMC_BASE 0xF0000000 -#define CONFIG_CMD_FAT -#define CONFIG_CMD_EXT2 -#define CONFIG_DOS_PARTITION -#endif - -/* - * SPI and LCD - */ -#ifdef CONFIG_CMD_SPI -#define CONFIG_SOFT_SPI -#define CONFIG_LCD -#define CONFIG_PXA_LCD -#define CONFIG_LMS283GF05 -#define CONFIG_VIDEO_LOGO -#define CONFIG_CMD_BMP -#define CONFIG_SPLASH_SCREEN -#define CONFIG_SPLASH_SCREEN_ALIGN -#define CONFIG_VIDEO_BMP_GZIP -#define CONFIG_VIDEO_BMP_RLE8 -#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (2 << 20) - -#define SPI_DELAY udelay(10) -#define SPI_SDA(val) zipitz2_spi_sda(val) -#define SPI_SCL(val) zipitz2_spi_scl(val) -#define SPI_READ zipitz2_spi_read() -#ifndef __ASSEMBLY__ -void zipitz2_spi_sda(int); -void zipitz2_spi_scl(int); -unsigned char zipitz2_spi_read(void); -#endif -#endif - -/* - * KGDB - */ -#ifdef CONFIG_CMD_KGDB -#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#endif - -/* - * HUSH Shell Configuration - */ -#define CONFIG_SYS_HUSH_PARSER 1 - -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_DEVICE_NULLDEV 1 - -/* - * Clock Configuration - */ -#define CONFIG_SYS_CPUSPEED 0x190 /* standard setting for 312MHz; L=16, N=1.5, A=0, SDCLK!=SystemBus */ - -/* - * SRAM Map - */ -#define PHYS_SRAM 0x5c000000 /* SRAM Bank #1 */ -#define PHYS_SRAM_SIZE 0x00040000 /* 256k */ - -/* - * DRAM Map - */ -#define CONFIG_NR_DRAM_BANKS 1 /* We have 1 bank of DRAM */ -#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */ - -#define CONFIG_SYS_DRAM_BASE 0xa0000000 /* CS0 */ -#define CONFIG_SYS_DRAM_SIZE 0x02000000 /* 32 MB DRAM */ - -#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_DRAM_BASE - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR (GENERATED_GBL_DATA_SIZE + PHYS_SRAM + 2048) - -/* - * NOR FLASH - */ -#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ -#define PHYS_FLASH_SIZE 0x00800000 /* 8 MB */ -#define PHYS_FLASH_SECT_SIZE 0x00010000 /* 64 KB sectors */ -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 - -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_FLASH_CFI_DRIVER 1 -#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT - -#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1 -#define CONFIG_SYS_MONITOR_LEN PHYS_FLASH_SECT_SIZE - -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_MAX_FLASH_SECT 256 - -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 - -#define CONFIG_SYS_FLASH_ERASE_TOUT 240000 -#define CONFIG_SYS_FLASH_WRITE_TOUT 240000 -#define CONFIG_SYS_FLASH_LOCK_TOUT 240000 -#define CONFIG_SYS_FLASH_UNLOCK_TOUT 240000 -#define CONFIG_SYS_FLASH_PROTECTION - -/* - * GPIO settings - */ -#define CONFIG_SYS_GAFR0_L_VAL 0x02000140 -#define CONFIG_SYS_GAFR0_U_VAL 0x59188000 -#define CONFIG_SYS_GAFR1_L_VAL 0x63900002 -#define CONFIG_SYS_GAFR1_U_VAL 0xaaa03950 -#define CONFIG_SYS_GAFR2_L_VAL 0x0aaaaaaa -#define CONFIG_SYS_GAFR2_U_VAL 0x29000308 -#define CONFIG_SYS_GAFR3_L_VAL 0x54000000 -#define CONFIG_SYS_GAFR3_U_VAL 0x000000d5 -#define CONFIG_SYS_GPCR0_VAL 0x00000000 -#define CONFIG_SYS_GPCR1_VAL 0x00000020 -#define CONFIG_SYS_GPCR2_VAL 0x00000000 -#define CONFIG_SYS_GPCR3_VAL 0x00000000 -#define CONFIG_SYS_GPDR0_VAL 0xdafcee00 -#define CONFIG_SYS_GPDR1_VAL 0xffa3aaab -#define CONFIG_SYS_GPDR2_VAL 0x8fe9ffff -#define CONFIG_SYS_GPDR3_VAL 0x001b1f8a -#define CONFIG_SYS_GPSR0_VAL 0x06080400 -#define CONFIG_SYS_GPSR1_VAL 0x007f0000 -#define CONFIG_SYS_GPSR2_VAL 0x032a0000 -#define CONFIG_SYS_GPSR3_VAL 0x00000180 - -#define CONFIG_SYS_PSSR_VAL 0x30 - -/* - * Clock settings - */ -#define CONFIG_SYS_CKEN 0x00511220 -#define CONFIG_SYS_CCCR 0x00000190 - -/* - * Memory settings - */ -#define CONFIG_SYS_MSC0_VAL 0x2ffc38f8 -#define CONFIG_SYS_MSC1_VAL 0x0000ccd1 -#define CONFIG_SYS_MSC2_VAL 0x0000b884 -#define CONFIG_SYS_MDCNFG_VAL 0x08000ba9 -#define CONFIG_SYS_MDREFR_VAL 0x2011a01e -#define CONFIG_SYS_MDMRS_VAL 0x00000000 -#define CONFIG_SYS_FLYCNFG_VAL 0x00010001 -#define CONFIG_SYS_SXCNFG_VAL 0x40044004 - -/* - * PCMCIA and CF Interfaces - */ -#define CONFIG_SYS_MECR_VAL 0x00000001 -#define CONFIG_SYS_MCMEM0_VAL 0x00014307 -#define CONFIG_SYS_MCMEM1_VAL 0x00014307 -#define CONFIG_SYS_MCATT0_VAL 0x0001c787 -#define CONFIG_SYS_MCATT1_VAL 0x0001c787 -#define CONFIG_SYS_MCIO0_VAL 0x0001430f -#define CONFIG_SYS_MCIO1_VAL 0x0001430f - -#endif /* __CONFIG_H */ -- 2.39.5