From 4a5a7fcac24498aa1535a467f0739e2fda5b4324 Mon Sep 17 00:00:00 2001 From: Bin Meng Date: Wed, 18 Oct 2017 18:20:53 -0700 Subject: [PATCH] x86: braswell: Fix unexpected crash during Linux kernel boot It was observed that when booting Linux kernel on Intel Cherry Hill board, unexpected crash happens quite randomly. Sometimes kernel just oops, while sometimes kernel throws MCE errors and hangs: mce: [Hardware Error]: Machine check events logged mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 4: c400000000010151 mce: [Hardware Error]: TSC 0 ADDR 130f3f2c0 mce: [Hardware Error]: PROCESSOR 0:406c3 TIME 1508160686 SOCKET 0 APIC 0 microcode 363 This looks like a hardware error per mcelog. After debugging, it seems turning off turbo mode on the processor does not expose this behavior, although U-Boot runs OK with turbo mode on. Suspect it is related to an errata of Braswell processor. To fix this, remove the Braswell cpu driver which does the turbo mode configuration, and switch to use the generic cpu-x86 driver. Also there is a configuration option in the FSP that turns on the turbo mode and that has been turned off too. Signed-off-by: Bin Meng Reviewed-by: Simon Glass --- arch/x86/cpu/braswell/Makefile | 2 +- arch/x86/cpu/braswell/cpu.c | 170 --------------------------------- arch/x86/dts/cherryhill.dts | 9 +- 3 files changed, 5 insertions(+), 176 deletions(-) delete mode 100644 arch/x86/cpu/braswell/cpu.c diff --git a/arch/x86/cpu/braswell/Makefile b/arch/x86/cpu/braswell/Makefile index ddf6d2804a..4a639b83f5 100644 --- a/arch/x86/cpu/braswell/Makefile +++ b/arch/x86/cpu/braswell/Makefile @@ -4,4 +4,4 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-y += braswell.o cpu.o early_uart.o fsp_configs.o +obj-y += braswell.o early_uart.o fsp_configs.o diff --git a/arch/x86/cpu/braswell/cpu.c b/arch/x86/cpu/braswell/cpu.c deleted file mode 100644 index 6ff9036597..0000000000 --- a/arch/x86/cpu/braswell/cpu.c +++ /dev/null @@ -1,170 +0,0 @@ -/* - * Copyright (C) 2017, Bin Meng - * - * SPDX-License-Identifier: GPL-2.0+ - * - * Derived from arch/x86/cpu/baytrail/cpu.c - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -static const unsigned int braswell_bus_freq_table[] = { - 83333333, - 100000000, - 133333333, - 116666666, - 80000000, - 93333333, - 90000000, - 88900000, - 87500000 -}; - -static unsigned int braswell_bus_freq(void) -{ - msr_t clk_info = msr_read(MSR_BSEL_CR_OVERCLOCK_CONTROL); - - if ((clk_info.lo & 0xf) < (ARRAY_SIZE(braswell_bus_freq_table))) - return braswell_bus_freq_table[clk_info.lo & 0xf]; - - return 0; -} - -static unsigned long braswell_tsc_freq(void) -{ - msr_t platform_info; - ulong bclk = braswell_bus_freq(); - - if (!bclk) - return 0; - - platform_info = msr_read(MSR_PLATFORM_INFO); - - return bclk * ((platform_info.lo >> 8) & 0xff); -} - -static int braswell_get_info(struct udevice *dev, struct cpu_info *info) -{ - info->cpu_freq = braswell_tsc_freq(); - info->features = (1 << CPU_FEAT_L1_CACHE) | (1 << CPU_FEAT_MMU); - - return 0; -} - -static int braswell_get_count(struct udevice *dev) -{ - int ecx = 0; - - /* - * Use the algorithm described in Intel 64 and IA-32 Architectures - * Software Developer's Manual Volume 3 (3A, 3B & 3C): System - * Programming Guide, Jan-2015. Section 8.9.2: Hierarchical Mapping - * of CPUID Extended Topology Leaf. - */ - while (1) { - struct cpuid_result leaf_b; - - leaf_b = cpuid_ext(0xb, ecx); - - /* - * Braswell doesn't have hyperthreading so just determine the - * number of cores by from level type (ecx[15:8] == * 2) - */ - if ((leaf_b.ecx & 0xff00) == 0x0200) - return leaf_b.ebx & 0xffff; - - ecx++; - } - - return 0; -} - -static void braswell_set_max_freq(void) -{ - msr_t perf_ctl; - msr_t msr; - - /* Enable speed step */ - msr = msr_read(MSR_IA32_MISC_ENABLES); - msr.lo |= (1 << 16); - msr_write(MSR_IA32_MISC_ENABLES, msr); - - /* Enable Burst Mode */ - msr = msr_read(MSR_IA32_MISC_ENABLES); - msr.hi = 0; - msr_write(MSR_IA32_MISC_ENABLES, msr); - - /* - * Set guaranteed ratio [21:16] from IACORE_TURBO_RATIOS to - * bits [15:8] of the PERF_CTL - */ - msr = msr_read(MSR_IACORE_TURBO_RATIOS); - perf_ctl.lo = (msr.lo & 0x3f0000) >> 8; - - /* - * Set guaranteed vid [22:16] from IACORE_TURBO_VIDS to - * bits [7:0] of the PERF_CTL - */ - msr = msr_read(MSR_IACORE_TURBO_VIDS); - perf_ctl.lo |= (msr.lo & 0x7f0000) >> 16; - - perf_ctl.hi = 0; - msr_write(MSR_IA32_PERF_CTL, perf_ctl); -} - -static int braswell_probe(struct udevice *dev) -{ - debug("Init Braswell core\n"); - - /* - * On Braswell the turbo disable bit is actually scoped at the - * building-block level, not package. For non-BSP cores that are - * within a building block, enable turbo. The cores within the BSP's - * building block will just see it already enabled and move on. - */ - if (lapicid()) - turbo_enable(); - - /* Dynamic L2 shrink enable and threshold, clear SINGLE_PCTL bit 11 */ - msr_clrsetbits_64(MSR_PMG_CST_CONFIG_CONTROL, 0x3f080f, 0xe0008), - msr_clrsetbits_64(MSR_POWER_MISC, - ENABLE_ULFM_AUTOCM_MASK | ENABLE_INDP_AUTOCM_MASK, 0); - - /* Disable C1E */ - msr_clrsetbits_64(MSR_POWER_CTL, 2, 0); - msr_setbits_64(MSR_POWER_MISC, 0x44); - - /* Set this core to max frequency ratio */ - braswell_set_max_freq(); - - return 0; -} - -static const struct udevice_id braswell_ids[] = { - { .compatible = "intel,braswell-cpu" }, - { } -}; - -static const struct cpu_ops braswell_ops = { - .get_desc = cpu_x86_get_desc, - .get_info = braswell_get_info, - .get_count = braswell_get_count, - .get_vendor = cpu_x86_get_vendor, -}; - -U_BOOT_DRIVER(cpu_x86_braswell_drv) = { - .name = "cpu_x86_braswell", - .id = UCLASS_CPU, - .of_match = braswell_ids, - .bind = cpu_x86_bind, - .probe = braswell_probe, - .ops = &braswell_ops, -}; diff --git a/arch/x86/dts/cherryhill.dts b/arch/x86/dts/cherryhill.dts index 1ccb605991..840a669956 100644 --- a/arch/x86/dts/cherryhill.dts +++ b/arch/x86/dts/cherryhill.dts @@ -37,28 +37,28 @@ cpu@0 { device_type = "cpu"; - compatible = "intel,braswell-cpu"; + compatible = "cpu-x86"; reg = <0>; intel,apic-id = <0>; }; cpu@1 { device_type = "cpu"; - compatible = "intel,braswell-cpu"; + compatible = "cpu-x86"; reg = <1>; intel,apic-id = <2>; }; cpu@2 { device_type = "cpu"; - compatible = "intel,braswell-cpu"; + compatible = "cpu-x86"; reg = <2>; intel,apic-id = <4>; }; cpu@3 { device_type = "cpu"; - compatible = "intel,braswell-cpu"; + compatible = "cpu-x86"; reg = <3>; intel,apic-id = <6>; }; @@ -194,7 +194,6 @@ fsp,pmic-i2c-bus = <0>; fsp,enable-isp; fsp,isp-pci-dev-config = ; - fsp,turbo-mode; fsp,pnp-settings = ; fsp,sd-detect-chk; }; -- 2.39.5