From 4d0df9c1e94f32a9695be352fead3167fb5135c7 Mon Sep 17 00:00:00 2001 From: Andrii Tseglytskyi Date: Mon, 20 May 2013 22:42:08 +0000 Subject: [PATCH] OMAP3+: introduce generic ABB support Adaptive Body Biasing (ABB) modulates transistor bias voltages dynamically in order to optimize switching speed versus leakage. Adaptive Body-Bias ldos are present for some voltage domains starting with OMAP3630. There are three modes of operation: * Bypass - the default, it just follows the vdd voltage * Foward Body-Bias - applies voltage bias to increase transistor performance at the cost of power. Used to operate safely at high OPPs. * Reverse Body-Bias - applies voltage bias to decrease leakage and save power. Used to save power at lower OPPs. Signed-off-by: Andrii Tseglytskyi Acked-by: Nishanth Menon --- arch/arm/cpu/armv7/omap-common/Makefile | 1 + arch/arm/cpu/armv7/omap-common/abb.c | 137 ++++++++++++++++++++++++ arch/arm/cpu/armv7/omap5/Makefile | 1 + arch/arm/cpu/armv7/omap5/abb.c | 67 ++++++++++++ arch/arm/include/asm/arch-omap3/omap3.h | 7 ++ arch/arm/include/asm/arch-omap4/omap.h | 8 ++ arch/arm/include/asm/arch-omap5/omap.h | 13 +++ arch/arm/include/asm/omap_common.h | 22 ++++ 8 files changed, 256 insertions(+) create mode 100644 arch/arm/cpu/armv7/omap-common/abb.c create mode 100644 arch/arm/cpu/armv7/omap5/abb.c diff --git a/arch/arm/cpu/armv7/omap-common/Makefile b/arch/arm/cpu/armv7/omap-common/Makefile index 55e82ba369..c4b9809ad0 100644 --- a/arch/arm/cpu/armv7/omap-common/Makefile +++ b/arch/arm/cpu/armv7/omap-common/Makefile @@ -34,6 +34,7 @@ COBJS += hwinit-common.o COBJS += clocks-common.o COBJS += emif-common.o COBJS += vc.o +COBJS += abb.o endif ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TI814X),) diff --git a/arch/arm/cpu/armv7/omap-common/abb.c b/arch/arm/cpu/armv7/omap-common/abb.c new file mode 100644 index 0000000000..87d1fb82eb --- /dev/null +++ b/arch/arm/cpu/armv7/omap-common/abb.c @@ -0,0 +1,137 @@ +/* + * + * Adaptive Body Bias programming sequence for OMAP family + * + * (C) Copyright 2013 + * Texas Instruments, + * + * Andrii Tseglytskyi + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include + +__weak s8 abb_setup_ldovbb(u32 fuse, u32 ldovbb) +{ + return -1; +} + +static void abb_setup_timings(u32 setup) +{ + u32 sys_rate, sr2_cnt, clk_cycles; + + /* + * SR2_WTCNT_VALUE is the settling time for the ABB ldo after a + * transition and must be programmed with the correct time at boot. + * The value programmed into the register is the number of SYS_CLK + * clock cycles that match a given wall time profiled for the ldo. + * This value depends on: + * settling time of ldo in micro-seconds (varies per OMAP family), + * of clock cycles per SYS_CLK period (varies per OMAP family), + * the SYS_CLK frequency in MHz (varies per board) + * The formula is: + * + * ldo settling time (in micro-seconds) + * SR2_WTCNT_VALUE = ------------------------------------------ + * (# system clock cycles) * (sys_clk period) + * + * Put another way: + * + * SR2_WTCNT_VALUE = settling time / (# SYS_CLK cycles / SYS_CLK rate)) + * + * To avoid dividing by zero multiply both "# clock cycles" and + * "settling time" by 10 such that the final result is the one we want. + */ + + /* calculate SR2_WTCNT_VALUE */ + sys_rate = DIV_ROUND(V_OSCK, 1000000); + clk_cycles = DIV_ROUND(OMAP_ABB_CLOCK_CYCLES * 10, sys_rate); + sr2_cnt = DIV_ROUND(OMAP_ABB_SETTLING_TIME * 10, clk_cycles); + + setbits_le32(setup, + sr2_cnt << (ffs(OMAP_ABB_SETUP_SR2_WTCNT_VALUE_MASK) - 1)); +} + +void abb_setup(u32 fuse, u32 ldovbb, u32 setup, u32 control, + u32 txdone, u32 txdone_mask, u32 opp) +{ + u32 abb_type_mask, opp_sel_mask; + + /* sanity check */ + if (!setup || !control || !txdone) + return; + + /* setup ABB only in case of Fast or Slow OPP */ + switch (opp) { + case OMAP_ABB_FAST_OPP: + abb_type_mask = OMAP_ABB_SETUP_ACTIVE_FBB_SEL_MASK; + opp_sel_mask = OMAP_ABB_CONTROL_FAST_OPP_SEL_MASK; + break; + case OMAP_ABB_SLOW_OPP: + abb_type_mask = OMAP_ABB_SETUP_ACTIVE_RBB_SEL_MASK; + opp_sel_mask = OMAP_ABB_CONTROL_SLOW_OPP_SEL_MASK; + break; + default: + return; + } + + /* + * For some OMAP silicons additional setup for LDOVBB register is + * required. This is determined by data retrieved from corresponding + * OPP EFUSE register. Data, which is retrieved from EFUSE - is + * ABB enable/disable flag and VSET value, which must be copied + * to LDOVBB register. If function call fails - return quietly, + * it means no ABB is required for such silicon. + * + * For silicons, which don't require LDOVBB setup "fuse" and + * "ldovbb" offsets are not defined. ABB will be initialized in + * the common way for them. + */ + if (fuse && ldovbb) { + if (abb_setup_ldovbb(fuse, ldovbb)) + return; + } + + /* clear ABB registers */ + writel(0, setup); + writel(0, control); + + /* configure timings, based on oscillator value */ + abb_setup_timings(setup); + + /* clear pending interrupts before setup */ + setbits_le32(txdone, txdone_mask); + + /* select ABB type */ + setbits_le32(setup, abb_type_mask | OMAP_ABB_SETUP_SR2EN_MASK); + + /* initiate ABB ldo change */ + setbits_le32(control, opp_sel_mask | OMAP_ABB_CONTROL_OPP_CHANGE_MASK); + + /* wait until transition complete */ + if (!wait_on_value(txdone_mask, txdone_mask, (void *)txdone, LDELAY)) + puts("Error: ABB txdone is not set\n"); + + /* clear ABB tranxdone */ + setbits_le32(txdone, txdone_mask); +} diff --git a/arch/arm/cpu/armv7/omap5/Makefile b/arch/arm/cpu/armv7/omap5/Makefile index ce00e2c3c5..6ff8dbb4eb 100644 --- a/arch/arm/cpu/armv7/omap5/Makefile +++ b/arch/arm/cpu/armv7/omap5/Makefile @@ -30,6 +30,7 @@ COBJS += emif.o COBJS += sdram.o COBJS += prcm-regs.o COBJS += hw_data.o +COBJS += abb.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) diff --git a/arch/arm/cpu/armv7/omap5/abb.c b/arch/arm/cpu/armv7/omap5/abb.c new file mode 100644 index 0000000000..92470becc0 --- /dev/null +++ b/arch/arm/cpu/armv7/omap5/abb.c @@ -0,0 +1,67 @@ +/* + * + * Adaptive Body Bias programming sequence for OMAP5 family + * + * (C) Copyright 2013 + * Texas Instruments, + * + * Andrii Tseglytskyi + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +/* + * Setup LDOVBB for OMAP5. + * On OMAP5+ some ABB settings are fused. They are handled + * in the following way: + * + * 1. corresponding EFUSE register contains ABB enable bit + * and VSET value + * 2. If ABB enable bit is set to 1, than ABB should be + * enabled, otherwise ABB should be disabled + * 3. If ABB is enabled, than VSET value should be copied + * to corresponding MUX control register + */ +s8 abb_setup_ldovbb(u32 fuse, u32 ldovbb) +{ + u32 vset; + + /* + * ABB parameters must be properly fused + * otherwise ABB should be disabled + */ + vset = readl(fuse); + if (!(vset & OMAP5_ABB_FUSE_ENABLE_MASK)) + return -1; + + /* prepare VSET value for LDOVBB mux register */ + vset &= OMAP5_ABB_FUSE_VSET_MASK; + vset >>= ffs(OMAP5_ABB_FUSE_VSET_MASK) - 1; + vset <<= ffs(OMAP5_ABB_LDOVBBMPU_VSET_OUT_MASK) - 1; + vset |= OMAP5_ABB_LDOVBBMPU_MUX_CTRL_MASK; + + /* setup LDOVBB using fused value */ + clrsetbits_le32(ldovbb, OMAP5_ABB_LDOVBBMPU_VSET_OUT_MASK, vset); + + return 0; +} diff --git a/arch/arm/include/asm/arch-omap3/omap3.h b/arch/arm/include/asm/arch-omap3/omap3.h index 2b5e9aeae1..c57599a938 100644 --- a/arch/arm/include/asm/arch-omap3/omap3.h +++ b/arch/arm/include/asm/arch-omap3/omap3.h @@ -253,4 +253,11 @@ struct gpio { #define OMAP3_EMU_HAL_START_HAL_CRITICAL 4 +/* ABB settings */ +#define OMAP_ABB_SETTLING_TIME 30 +#define OMAP_ABB_CLOCK_CYCLES 8 + +/* ABB tranxdone mask */ +#define OMAP_ABB_MPU_TXDONE_MASK (0x1 << 26) + #endif diff --git a/arch/arm/include/asm/arch-omap4/omap.h b/arch/arm/include/asm/arch-omap4/omap.h index e9a6ffeb83..55a07605b8 100644 --- a/arch/arm/include/asm/arch-omap4/omap.h +++ b/arch/arm/include/asm/arch-omap4/omap.h @@ -143,4 +143,12 @@ struct s32ktimer { #define NON_SECURE_SRAM_END 0x4030E000 /* Not inclusive */ /* base address for indirect vectors (internal boot mode) */ #define SRAM_ROM_VECT_BASE 0x4030D000 + +/* ABB settings */ +#define OMAP_ABB_SETTLING_TIME 50 +#define OMAP_ABB_CLOCK_CYCLES 16 + +/* ABB tranxdone mask */ +#define OMAP_ABB_MPU_TXDONE_MASK (0x1 << 7) + #endif diff --git a/arch/arm/include/asm/arch-omap5/omap.h b/arch/arm/include/asm/arch-omap5/omap.h index 4f43a903d8..1c1a64bd23 100644 --- a/arch/arm/include/asm/arch-omap5/omap.h +++ b/arch/arm/include/asm/arch-omap5/omap.h @@ -215,6 +215,19 @@ struct s32ktimer { #define SRCODE_OVERRIDE_SEL_XS_SHIFT 0 #define SRCODE_OVERRIDE_SEL_XS_MASK (1 << 0) +/* ABB settings */ +#define OMAP_ABB_SETTLING_TIME 50 +#define OMAP_ABB_CLOCK_CYCLES 16 + +/* ABB tranxdone mask */ +#define OMAP_ABB_MPU_TXDONE_MASK (0x1 << 7) + +/* ABB efuse masks */ +#define OMAP5_ABB_FUSE_VSET_MASK (0x1F << 24) +#define OMAP5_ABB_FUSE_ENABLE_MASK (0x1 << 29) +#define OMAP5_ABB_LDOVBBMPU_MUX_CTRL_MASK (0x1 << 10) +#define OMAP5_ABB_LDOVBBMPU_VSET_OUT_MASK (0x1f << 0) + #ifndef __ASSEMBLY__ struct srcomp_params { s8 divide_factor; diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h index ee7b188d3a..f8f3719bd6 100644 --- a/arch/arm/include/asm/omap_common.h +++ b/arch/arm/include/asm/omap_common.h @@ -242,6 +242,8 @@ struct prcm_regs { u32 cm_l3init_fsusb_clkctrl; u32 cm_l3init_ocp2scp1_clkctrl; + u32 prm_irqstatus_mpu_2; + /* cm2.l4per */ u32 cm_l4per_clkstctrl; u32 cm_l4per_dynamicdep; @@ -328,6 +330,8 @@ struct prcm_regs { u32 prm_sldo_mpu_ctrl; u32 prm_sldo_mm_setup; u32 prm_sldo_mm_ctrl; + u32 prm_abbldo_mpu_setup; + u32 prm_abbldo_mpu_ctrl; u32 cm_div_m4_dpll_core; u32 cm_div_m5_dpll_core; @@ -350,6 +354,7 @@ struct prcm_regs { struct omap_sys_ctrl_regs { u32 control_status; + u32 control_std_fuse_opp_vdd_mpu_2; u32 control_core_mmr_lock1; u32 control_core_mmr_lock2; u32 control_core_mmr_lock3; @@ -419,6 +424,7 @@ struct omap_sys_ctrl_regs { u32 control_port_emif2_sdram_config; u32 control_emif1_sdram_config_ext; u32 control_emif2_sdram_config_ext; + u32 control_wkup_ldovbb_mpu_voltage_ctrl; u32 control_smart1nopmio_padconf_0; u32 control_smart1nopmio_padconf_1; u32 control_padconf_mode; @@ -545,6 +551,9 @@ void enable_non_essential_clocks(void); void scale_vcores(struct vcores_data const *); u32 get_offset_code(u32 volt_offset, struct pmic_data *pmic); void do_scale_vcore(u32 vcore_reg, u32 volt_mv, struct pmic_data *pmic); +void abb_setup(u32 fuse, u32 ldovbb, u32 setup, u32 control, + u32 txdone, u32 txdone_mask, u32 opp); +s8 abb_setup_ldovbb(u32 fuse, u32 ldovbb); /* Max value for DPLL multiplier M */ #define OMAP_DPLL_MAX_N 127 @@ -555,6 +564,19 @@ void do_scale_vcore(u32 vcore_reg, u32 volt_mv, struct pmic_data *pmic); #define OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL 2 #define OMAP_INIT_CONTEXT_UBOOT_AFTER_CH 3 +/* ABB */ +#define OMAP_ABB_NOMINAL_OPP 0 +#define OMAP_ABB_FAST_OPP 1 +#define OMAP_ABB_SLOW_OPP 3 +#define OMAP_ABB_CONTROL_FAST_OPP_SEL_MASK (0x1 << 0) +#define OMAP_ABB_CONTROL_SLOW_OPP_SEL_MASK (0x1 << 1) +#define OMAP_ABB_CONTROL_OPP_CHANGE_MASK (0x1 << 2) +#define OMAP_ABB_CONTROL_SR2_IN_TRANSITION_MASK (0x1 << 6) +#define OMAP_ABB_SETUP_SR2EN_MASK (0x1 << 0) +#define OMAP_ABB_SETUP_ACTIVE_FBB_SEL_MASK (0x1 << 2) +#define OMAP_ABB_SETUP_ACTIVE_RBB_SEL_MASK (0x1 << 1) +#define OMAP_ABB_SETUP_SR2_WTCNT_VALUE_MASK (0xff << 8) + static inline u32 omap_revision(void) { extern u32 *const omap_si_rev; -- 2.39.5