From 4ff9aea9d6b5602683a920951ef896996438af62 Mon Sep 17 00:00:00 2001 From: "Ira W. Snyder" Date: Fri, 22 Aug 2008 11:00:14 -0700 Subject: [PATCH] mpc83xx: add PCISLAVE support to 83XX_GENERIC_PCI setup code This adds a helper function to unlock the PCI configuration bit, so that any extra PCI setup (such as outbound windows, etc.) can be done after using the 83XX_GENERIC_PCI code to set up the PCI bus. Signed-off-by: Ira W. Snyder Signed-off-by: Kim Phillips --- cpu/mpc83xx/pci.c | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) diff --git a/cpu/mpc83xx/pci.c b/cpu/mpc83xx/pci.c index adabf7aac7..c3ec5f87ee 100644 --- a/cpu/mpc83xx/pci.c +++ b/cpu/mpc83xx/pci.c @@ -167,6 +167,32 @@ void mpc83xx_pci_init(int num_buses, struct pci_region **reg, int warmboot) pci_init_bus(i, reg[i]); } +#ifdef CONFIG_PCISLAVE + +#define PCI_FUNCTION_CONFIG 0x44 +#define PCI_FUNCTION_CFG_LOCK 0x20 + +/* + * Unlock the configuration bit so that the host system can begin booting + * + * This should be used after you have: + * 1) Called mpc83xx_pci_init() + * 2) Set up your inbound translation windows to the appropriate size + */ +void mpc83xx_pcislave_unlock(int bus) +{ + struct pci_controller *hose = &pci_hose[bus]; + u32 dev; + u16 reg16; + + /* Unlock configuration lock in PCI function configuration register */ + dev = PCI_BDF(hose->first_busno, 0, 0); + pci_hose_read_config_word (hose, dev, PCI_FUNCTION_CONFIG, ®16); + reg16 &= ~(PCI_FUNCTION_CFG_LOCK); + pci_hose_write_config_word (hose, dev, PCI_FUNCTION_CONFIG, reg16); +} +#endif + #if defined(CONFIG_OF_LIBFDT) void ft_pci_setup(void *blob, bd_t *bd) { -- 2.39.5