From 504b9f1a5fa1c3c7efc8349907703986dcd4ed8a Mon Sep 17 00:00:00 2001 From: Philipp Tomsich Date: Wed, 29 Mar 2017 21:20:28 +0200 Subject: [PATCH] rockchip: spl: rk3399: disable DDR security regions for SPL The RK3399 hangs during DMA of the Designware MMC controller, when performing DMA-based transactions in SPL due to the DDR security settings left behind by the BootROM (i.e. accesses to the first MB of DRAM are restricted... however, the DMA is likely to target this first MB, as it transfers from/to the stack). System security is not affected, as the final security configuration is performed by the ATF, which is executed after the SPL stage. With this fix in place, we can now drop 'fifo-mode' in the DTS for the RK3399-Q7 (Puma). Signed-off-by: Philipp Tomsich Reviewed-by: Kever Yang Acked-by: Simon Glass --- arch/arm/mach-rockchip/rk3399-board-spl.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/arch/arm/mach-rockchip/rk3399-board-spl.c b/arch/arm/mach-rockchip/rk3399-board-spl.c index 4f84ec10a5..f5465294c4 100644 --- a/arch/arm/mach-rockchip/rk3399-board-spl.c +++ b/arch/arm/mach-rockchip/rk3399-board-spl.c @@ -157,6 +157,7 @@ void secure_timer_init(void) } #define GRF_EMMCCORE_CON11 0xff77f02c +#define SGRF_DDR_RGN_CON16 0xff330040 void board_init_f(ulong dummy) { struct udevice *pinctrl; @@ -201,6 +202,17 @@ void board_init_f(ulong dummy) hang(); } + /* + * Disable DDR security regions. + * + * As we are entered from the BootROM, the region from + * 0x0 through 0xfffff (i.e. the first MB of memory) will + * be protected. This will cause issues with the DW_MMC + * driver, which tries to DMA from/to the stack (likely) + * located in this range. + */ + rk_clrsetreg(SGRF_DDR_RGN_CON16, 0x1FF, 0); + secure_timer_init(); ret = uclass_get_device(UCLASS_PINCTRL, 0, &pinctrl); @@ -238,6 +250,7 @@ void spl_board_init(void) #ifdef CONFIG_ROCKCHIP_SPL_BACK_TO_BROM back_to_bootrom(); #endif + return; err: printf("spl_board_init: Error %d\n", ret); -- 2.39.5