From 5051ff5fb0ad44fae480f6af9f2c501f10dd065d Mon Sep 17 00:00:00 2001 From: "Ye.Li" Date: Thu, 6 Nov 2014 16:28:59 +0800 Subject: [PATCH] imx: mx6sabre common: Factorize the Pfuze init function Since the Pfuze initializations are similar on various mx6 SABRE boards. Factorize the initialization to a common function in file board/freescale/common/pfuze.c. So that all SABRE boards BSP can share the function. Signed-off-by: Ye.Li --- board/freescale/common/Makefile | 1 + board/freescale/common/pfuze.c | 54 +++++++++++++++++++++++++++++++++ board/freescale/common/pfuze.h | 12 ++++++++ 3 files changed, 67 insertions(+) create mode 100644 board/freescale/common/pfuze.c create mode 100644 board/freescale/common/pfuze.h diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile index 32b5a3b70c..25a1bc1a0f 100644 --- a/board/freescale/common/Makefile +++ b/board/freescale/common/Makefile @@ -53,6 +53,7 @@ obj-$(CONFIG_P5040DS) += ics307_clk.o obj-$(CONFIG_VSC_CROSSBAR) += vsc3316_3308.o obj-$(CONFIG_IDT8T49N222A) += idt8t49n222a_serdes_clk.o obj-$(CONFIG_ZM7300) += zm7300.o +obj-$(CONFIG_POWER_PFUZE100) += pfuze.o # deal with common files for P-series corenet based devices obj-$(CONFIG_P2041RDB) += p_corenet/ diff --git a/board/freescale/common/pfuze.c b/board/freescale/common/pfuze.c new file mode 100644 index 0000000000..2cd1794429 --- /dev/null +++ b/board/freescale/common/pfuze.c @@ -0,0 +1,54 @@ +/* + * Copyright 2014 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include + +struct pmic *pfuze_common_init(unsigned char i2cbus) +{ + struct pmic *p; + int ret; + unsigned int reg; + + ret = power_pfuze100_init(i2cbus); + if (ret) + return NULL; + + p = pmic_get("PFUZE100"); + ret = pmic_probe(p); + if (ret) + return NULL; + + pmic_reg_read(p, PFUZE100_DEVICEID, ®); + printf("PMIC: PFUZE100 ID=0x%02x\n", reg); + + /* Set SW1AB stanby volage to 0.975V */ + pmic_reg_read(p, PFUZE100_SW1ABSTBY, ®); + reg &= ~SW1x_STBY_MASK; + reg |= SW1x_0_975V; + pmic_reg_write(p, PFUZE100_SW1ABSTBY, reg); + + /* Set SW1AB/VDDARM step ramp up time from 16us to 4us/25mV */ + pmic_reg_read(p, PUZE_100_SW1ABCONF, ®); + reg &= ~SW1xCONF_DVSSPEED_MASK; + reg |= SW1xCONF_DVSSPEED_4US; + pmic_reg_write(p, PUZE_100_SW1ABCONF, reg); + + /* Set SW1C standby voltage to 0.975V */ + pmic_reg_read(p, PFUZE100_SW1CSTBY, ®); + reg &= ~SW1x_STBY_MASK; + reg |= SW1x_0_975V; + pmic_reg_write(p, PFUZE100_SW1CSTBY, reg); + + /* Set SW1C/VDDSOC step ramp up time from 16us to 4us/25mV */ + pmic_reg_read(p, PFUZE100_SW1CCONF, ®); + reg &= ~SW1xCONF_DVSSPEED_MASK; + reg |= SW1xCONF_DVSSPEED_4US; + pmic_reg_write(p, PFUZE100_SW1CCONF, reg); + + return p; +} diff --git a/board/freescale/common/pfuze.h b/board/freescale/common/pfuze.h new file mode 100644 index 0000000000..7a4126cca0 --- /dev/null +++ b/board/freescale/common/pfuze.h @@ -0,0 +1,12 @@ +/* + * Copyright 2014 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __PFUZE_BOARD_HELPER__ +#define __PFUZE_BOARD_HELPER__ + +struct pmic *pfuze_common_init(unsigned char i2cbus); + +#endif -- 2.39.5