From 5255cc11570e14f37bde5ec199298622ace6760e Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Sun, 20 May 2012 21:12:31 -0700 Subject: [PATCH] sync with Jean's generic version. Drop support for unknown/untested chips ... as too risky. Manual chip type override accomplishes the same. Signed-off-by: Guenter Roeck --- it87.c | 176 ++++++++++++++++++++++++++++----------------------------- 1 file changed, 87 insertions(+), 89 deletions(-) diff --git a/it87.c b/it87.c index 43370af..551fbcc 100644 --- a/it87.c +++ b/it87.c @@ -20,10 +20,6 @@ * IT8728F Super I/O chip w/LPC interface * IT8758E Super I/O chip w/LPC interface * IT8782F Super I/O chip w/LPC interface - * IT8771E Super I/O chip w/LPC interface - * IT8772E Super I/O chip w/LPC interface - * IT8781F Super I/O chip w/LPC interface - * IT8782F Super I/O chip w/LPC interface * IT8783E/F Super I/O chip w/LPC interface * Sis950 A clone of the IT8705F * @@ -62,13 +58,45 @@ #include #include #include +#include + +#ifndef request_muxed_region +#if LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 28) +#define request_muxed_region(start,n,name) __request_region(&ioport_resource, (start), (n), (name)) +#else +#define IORESOURCE_MUXED 0x00400000 +#define request_muxed_region(start,n,name) __request_region(&ioport_resource, (start), (n), (name), IORESOURCE_MUXED) +#endif +#endif + +/* Red Hat EL5 includes backports of these functions, so we can't redefine + * our own. */ +#if LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 24) +#if !(defined RHEL_MAJOR && RHEL_MAJOR == 5 && RHEL_MINOR >= 5) +static inline int strict_strtoul(const char *cp, unsigned int base, + unsigned long *res) +{ + *res = simple_strtoul(cp, NULL, base); + return 0; +} + +static inline int strict_strtol(const char *cp, unsigned int base, long *res) +{ + *res = simple_strtol(cp, NULL, base); + return 0; +} +#endif +#endif -#include "compat.h" +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 39) +#define kstrtoul strict_strtoul +#define kstrtol strict_strtol +#endif #define DRVNAME "it87" -enum chips { it87, it8712, it8716, it8718, it8720, it8721, it8728, it8771, - it8772, it8781, it8782, it8783 }; +enum chips { it87, it8712, it8716, it8718, it8720, it8721, it8728, it8782, + it8783 }; static unsigned short force_id; module_param(force_id, ushort, 0); @@ -146,9 +174,6 @@ static inline void superio_exit(void) #define IT8721F_DEVID 0x8721 #define IT8726F_DEVID 0x8726 #define IT8728F_DEVID 0x8728 -#define IT8771E_DEVID 0x8771 -#define IT8772E_DEVID 0x8772 -#define IT8781F_DEVID 0x8781 #define IT8782F_DEVID 0x8782 #define IT8783E_DEVID 0x8783 #define IT87_ACT_REG 0x30 @@ -312,9 +337,7 @@ static inline int has_12mv_adc(const struct it87_data *data) * on selected inputs. */ return data->type == it8721 - || data->type == it8728 - || data->type == it8771 - || data->type == it8772; + || data->type == it8728; } static inline int has_newer_autopwm(const struct it87_data *data) @@ -322,12 +345,9 @@ static inline int has_newer_autopwm(const struct it87_data *data) /* * IT8721F and later have separate registers for the temperature * mapping and the manual duty cycle. - * [ Assume that also applies to IT8771 / IT8772 ] */ return data->type == it8721 - || data->type == it8728 - || data->type == it8771 - || data->type == it8772; + || data->type == it8728; } static int adc_lsb(const struct it87_data *data, int nr) @@ -426,9 +446,6 @@ static inline int has_16bit_fans(const struct it87_data *data) || data->type == it8720 || data->type == it8721 || data->type == it8728 - || data->type == it8771 - || data->type == it8772 - || data->type == it8781 || data->type == it8782 || data->type == it8783; } @@ -1718,15 +1735,6 @@ static int __init it87_find(unsigned short *address, case IT8728F_DEVID: sio_data->type = it8728; break; - case IT8771E_DEVID: - sio_data->type = it8771; - break; - case IT8772E_DEVID: - sio_data->type = it8772; - break; - case IT8781F_DEVID: - sio_data->type = it8781; - break; case IT8782F_DEVID: sio_data->type = it8782; break; @@ -1770,7 +1778,6 @@ static int __init it87_find(unsigned short *address, sio_data->beep_pin = superio_inb(IT87_SIO_BEEP_PIN_REG) & 0x3f; } else if (sio_data->type == it8783) { int reg25, reg27, reg2A, reg2C, regEF; - bool uart6; sio_data->skip_vid = 1; /* No VID */ @@ -1782,10 +1789,8 @@ static int __init it87_find(unsigned short *address, reg2C = superio_inb(IT87_SIO_PINX2_REG); regEF = superio_inb(IT87_SIO_SPI_REG); - uart6 = reg2C & (1 << 2); - /* Check if fan3 is there or not */ - if ((reg27 & (1 << 0)) || !uart6) + if ((reg27 & (1 << 0)) || !(reg2C & (1 << 2))) sio_data->skip_fan |= (1 << 2); if ((reg25 & (1 << 4)) || (!(reg2A & (1 << 1)) && (regEF & (1 << 0)))) @@ -1798,11 +1803,11 @@ static int __init it87_find(unsigned short *address, sio_data->skip_pwm |= (1 << 1); /* VIN5 */ - if ((reg27 & (1 << 0)) || uart6) + if ((reg27 & (1 << 0)) || (reg2C & (1 << 2))) sio_data->skip_in |= (1 << 5); /* No VIN5 */ /* VIN6 */ - if ((reg27 & (1 << 1)) || uart6) + if (reg27 & (1 << 1)) sio_data->skip_in |= (1 << 6); /* No VIN6 */ /* @@ -1811,28 +1816,27 @@ static int __init it87_find(unsigned short *address, */ if (reg27 & (1 << 2)) { /* - * The data sheet is a bit uncear regarding the internal - * voltage divider for VCCH5V. It says - * "This bit enables and switches VIN7 (pin91) to the + * The data sheet is a bit unclear regarding the + * internal voltage divider for VCCH5V. It says + * "This bit enables and switches VIN7 (pin 91) to the * internal voltage divider for VCCH5V". * This is different to other chips, where the internal * voltage divider would connect VIN7 to an internal - * voltage source. Maybe that is the case here as well, - * but at least for now follow the data sheet and assume - * that there is no VIN7 if pin 91 is not configured as - * VIN7 input. + * voltage source. Maybe that is the case here as well. + * + * Since we don't know for sure, re-route it if that is + * not the case, and ask the user to report if the + * resulting voltage is sane. */ - sio_data->skip_in |= (1 << 7); + if (!(reg2C & (1 << 1))) { + reg2C |= (1 << 1); + superio_outb(IT87_SIO_PINX2_REG, reg2C); + pr_notice("Routing internal VCCH5V to in7.\n"); + } + pr_notice("in7 routed to internal voltage divider, with external pin disabled.\n"); + pr_notice("Please report if it displays a reasonable voltage.\n"); } - /* - * No temp3 if UART6 is enabled and the temp3 source is TEMPIN3. - * We can not read the temp3 source here, so skip_temp is - * preliminary. - */ - if (uart6) - sio_data->skip_temp |= (1 << 2); - if (reg2C & (1 << 0)) sio_data->internal |= (1 << 0); if (reg2C & (1 << 1)) @@ -1848,10 +1852,9 @@ static int __init it87_find(unsigned short *address, reg = superio_inb(IT87_SIO_GPIO3_REG); if (sio_data->type == it8721 || sio_data->type == it8728 || - sio_data->type == it8771 || sio_data->type == it8772 || - sio_data->type == it8781 || sio_data->type == it8782) { + sio_data->type == it8782) { /* - * IT8721F, IT8758E, and IT8782F don't have VID pins + * IT8721F/IT8758E, and IT8782F don't have VID pins * at all, not sure about the IT8728F. */ sio_data->skip_vid = 1; @@ -1895,9 +1898,10 @@ static int __init it87_find(unsigned short *address, * setting. So we force the internal routing in this case. * * On IT8782F, VIN7 is multiplexed with one of the UART6 pins. - * If UART6 is enabled, re-route VIN7 to the internal divider. + * If UART6 is enabled, re-route VIN7 to the internal divider + * if that is not already the case. */ - if ((sio_data->type == it8720 && !(reg & (1 << 1))) || uart6) { + if ((sio_data->type == it8720 || uart6) && !(reg & (1 << 1))) { reg |= (1 << 1); superio_outb(IT87_SIO_PINX2_REG, reg); pr_notice("Routing internal VCCH to in7\n"); @@ -1905,8 +1909,7 @@ static int __init it87_find(unsigned short *address, if (reg & (1 << 0)) sio_data->internal |= (1 << 0); if ((reg & (1 << 1)) || sio_data->type == it8721 || - sio_data->type == it8728 || sio_data->type == it8771 || - sio_data->type == it8772 ) + sio_data->type == it8728) sio_data->internal |= (1 << 1); /* @@ -1961,15 +1964,20 @@ static void it87_remove_files(struct device *dev) sysfs_remove_group(&dev->kobj, &it87_group); for (i = 0; i < 9; i++) { + if (sio_data->skip_in & (1 << i)) + continue; sysfs_remove_group(&dev->kobj, &it87_group_in[i]); if (it87_attributes_in_beep[i]) sysfs_remove_file(&dev->kobj, it87_attributes_in_beep[i]); } for (i = 0; i < 3; i++) { + if (!(data->has_temp & (1 << i))) + continue; sysfs_remove_group(&dev->kobj, &it87_group_temp[i]); - sysfs_remove_file(&dev->kobj, - it87_attributes_temp_beep[i]); + if (sio_data->beep_pin) + sysfs_remove_file(&dev->kobj, + it87_attributes_temp_beep[i]); } for (i = 0; i < 5; i++) { if (!(data->has_fan & (1 << i))) @@ -2010,27 +2018,22 @@ static int __devinit it87_probe(struct platform_device *pdev) "it8720", "it8721", "it8728", - "it8771", - "it8772", - "it8781", "it8782", "it8783", }; res = platform_get_resource(pdev, IORESOURCE_IO, 0); - if (!request_region(res->start, IT87_EC_EXTENT, DRVNAME)) { + if (!devm_request_region(&pdev->dev, res->start, IT87_EC_EXTENT, + DRVNAME)) { dev_err(dev, "Failed to request region 0x%lx-0x%lx\n", (unsigned long)res->start, (unsigned long)(res->start + IT87_EC_EXTENT - 1)); - err = -EBUSY; - goto ERROR0; + return -EBUSY; } data = devm_kzalloc(&pdev->dev, sizeof(struct it87_data), GFP_KERNEL); - if (!data) { - err = -ENOMEM; - goto ERROR1; - } + if (!data) + return -ENOMEM; data->addr = res->start; data->type = sio_data->type; @@ -2039,10 +2042,8 @@ static int __devinit it87_probe(struct platform_device *pdev) /* Now, we do the remaining detection. */ if ((it87_read_value(data, IT87_REG_CONFIG) & 0x80) - || it87_read_value(data, IT87_REG_CHIPID) != 0x90) { - err = -ENODEV; - goto ERROR1; - } + || it87_read_value(data, IT87_REG_CHIPID) != 0x90) + return -ENODEV; platform_set_drvdata(pdev, data); @@ -2059,8 +2060,7 @@ static int __devinit it87_probe(struct platform_device *pdev) data->in_scaled |= (1 << 7); /* in7 is VSB */ if (sio_data->internal & (1 << 2)) data->in_scaled |= (1 << 8); /* in8 is Vbat */ - } else if (sio_data->type == it8781 || sio_data->type == it8782 || - sio_data->type == it8783) { + } else if (sio_data->type == it8782 || sio_data->type == it8783) { if (sio_data->internal & (1 << 0)) data->in_scaled |= (1 << 3); /* in3 is VCC5V */ if (sio_data->internal & (1 << 1)) @@ -2068,14 +2068,20 @@ static int __devinit it87_probe(struct platform_device *pdev) } data->has_temp = 0x07; - if (sio_data->skip_temp && - !(it87_read_value(data, IT87_REG_TEMP_EXTRA) & 0x80)) - data->has_temp &= ~sio_data->skip_temp; + if (sio_data->skip_temp & (1 << 2)) { + if (sio_data->type == it8782 + && !(it87_read_value(data, IT87_REG_TEMP_EXTRA) & 0x80)) + data->has_temp &= ~(1 << 2); + } /* Initialize the IT87 chip */ it87_init_device(pdev); /* Register sysfs hooks */ + err = sysfs_create_group(&dev->kobj, &it87_group); + if (err) + return err; + for (i = 0; i < 9; i++) { if (sio_data->skip_in & (1 << i)) continue; @@ -2104,10 +2110,6 @@ static int __devinit it87_probe(struct platform_device *pdev) } } - err = sysfs_create_group(&dev->kobj, &it87_group); - if (err) - goto ERROR4; - /* Do not create fan files for disabled fans */ fan_group = it87_get_fan_group(data); fan_beep_need_rw = 1; @@ -2187,9 +2189,6 @@ static int __devinit it87_probe(struct platform_device *pdev) ERROR4: it87_remove_files(dev); -ERROR1: - release_region(res->start, IT87_EC_EXTENT); -ERROR0: return err; } @@ -2200,7 +2199,6 @@ static int __devexit it87_remove(struct platform_device *pdev) hwmon_device_unregister(data->hwmon_dev); it87_remove_files(&pdev->dev); - release_region(data->addr, IT87_EC_EXTENT); return 0; } @@ -2363,8 +2361,8 @@ static void __devinit it87_init_device(struct platform_device *pdev) tmp | 0x07); } /* IT8705F, IT8782F, and IT8783E/F only support three fans. */ - if (data->type != it87 && data->type != it8781 && - data->type != it8782 && data->type != it8783) { + if (data->type != it87 && data->type != it8782 && + data->type != it8783) { if (tmp & (1 << 4)) data->has_fan |= (1 << 3); /* fan4 enabled */ if (tmp & (1 << 5)) -- 2.39.5