From 52b2601696638dcc7b1041fac587605691ec5d82 Mon Sep 17 00:00:00 2001 From: Asen Dimov Date: Fri, 9 Dec 2011 10:56:55 +0000 Subject: [PATCH] pm9263: init serial console before relocation The early messages can be seen on the debug console. Signed-off-by: Asen Chavdarov Dimov --- board/ronetix/pm9263/pm9263.c | 22 ++++++++++++++-------- include/configs/pm9263.h | 1 + 2 files changed, 15 insertions(+), 8 deletions(-) diff --git a/board/ronetix/pm9263/pm9263.c b/board/ronetix/pm9263/pm9263.c index 59cca87a9b..1266114aee 100644 --- a/board/ronetix/pm9263/pm9263.c +++ b/board/ronetix/pm9263/pm9263.c @@ -336,22 +336,28 @@ void lcd_show_board_info(void) #endif /* CONFIG_LCD */ -int board_init(void) +int board_early_init_f(void) { struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - /* Enable Ctrlc */ - console_init_f(); - - writel((1 << ATMEL_ID_PIOA) | - (1 << ATMEL_ID_PIOCDE) | - (1 << ATMEL_ID_PIOB), + /* Enable clocks for all PIOs */ + writel((1 << ATMEL_ID_PIOA) | (1 << ATMEL_ID_PIOB) | + (1 << ATMEL_ID_PIOCDE), &pmc->pcer); + at91_seriald_hw_init(); + + return 0; +} + +int board_init(void) +{ + /* arch number of AT91SAM9263EK-Board */ + gd->bd->bi_arch_number = MACH_TYPE_PM9263; + /* adress of boot parameters */ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; - at91_seriald_hw_init(); #ifdef CONFIG_CMD_NAND pm9263_nand_hw_init(); #endif diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h index 374be27396..32c596241a 100644 --- a/include/configs/pm9263.h +++ b/include/configs/pm9263.h @@ -172,6 +172,7 @@ #undef CONFIG_SKIP_LOWLEVEL_INIT #define CONFIG_USER_LOWLEVEL_INIT 1 +#define CONFIG_BOARD_EARLY_INIT_F /* * Hardware drivers -- 2.39.5