From 54387ac931fa7cc92cd45c53798379af1f9adc44 Mon Sep 17 00:00:00 2001 From: wdenk Date: Wed, 8 Oct 2003 22:45:44 +0000 Subject: [PATCH] * Patch by Yuli Barcohen, 25 Sep 2003: add support for Zephyr Engineering ZPC.1900 board * Patch by Anders Larsen, 23 Sep 2003: add CMD_PORTIO to CFG_CMD_NONSTD (commands in question are only implemented for the x86 architecture) --- CHANGELOG | 7 + MAKEALL | 2 +- Makefile | 7 +- README | 8 +- board/zpc1900/Makefile | 47 +++ board/zpc1900/config.mk | 31 ++ board/zpc1900/flash.c | 818 ++++++++++++++++++++++++++++++++++++++ board/zpc1900/u-boot.lds | 122 ++++++ board/zpc1900/zpc1900.c | 308 ++++++++++++++ cpu/mpc8260/cpu.c | 3 + include/cmd_confdefs.h | 1 + include/configs/ZPC1900.h | 283 +++++++++++++ 12 files changed, 1631 insertions(+), 6 deletions(-) create mode 100644 board/zpc1900/Makefile create mode 100644 board/zpc1900/config.mk create mode 100644 board/zpc1900/flash.c create mode 100644 board/zpc1900/u-boot.lds create mode 100644 board/zpc1900/zpc1900.c create mode 100644 include/configs/ZPC1900.h diff --git a/CHANGELOG b/CHANGELOG index 54d6e88626..4020c100e0 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,13 @@ Changes for U-Boot 1.0.0: ====================================================================== +* Patch by Yuli Barcohen, 25 Sep 2003: + add support for Zephyr Engineering ZPC.1900 board + +* Patch by Anders Larsen, 23 Sep 2003: + add CMD_PORTIO to CFG_CMD_NONSTD (commands in question are only + implemented for the x86 architecture) + * Patch by Sangmoon Kim, 23 Sep 2003: fix pll_pci_to_mem_multiplier table for MPC8245 diff --git a/MAKEALL b/MAKEALL index 3a34f03abb..0e8be5d7e0 100644 --- a/MAKEALL +++ b/MAKEALL @@ -82,7 +82,7 @@ LIST_8260=" \ gw8260 hymod IPHASE4539 MPC8260ADS \ MPC8266ADS PM826 ppmc8260 RPXsuper \ rsdproto sacsng sbc8260 SCM \ - TQM8260_AC TQM8260_AD TQM8260_AE \ + TQM8260_AC TQM8260_AD TQM8260_AE ZPC1900 \ " ######################################################################### diff --git a/Makefile b/Makefile index 6d006bffaf..ededf8a273 100644 --- a/Makefile +++ b/Makefile @@ -642,6 +642,9 @@ utx8245_config: unconfig ## MPC8260 Systems ######################################################################### +atc_config: unconfig + @./mkconfig $(@:_config=) ppc mpc8260 atc + cogent_mpc8260_config: unconfig @./mkconfig $(@:_config=) ppc mpc8260 cogent @@ -765,8 +768,8 @@ TQM8265_AA_config: unconfig fi @./mkconfig -a TQM8260 ppc mpc8260 tqm8260 -atc_config: unconfig - @./mkconfig $(@:_config=) ppc mpc8260 atc +ZPC1900_config: unconfig + @./mkconfig $(@:_config=) ppc mpc8260 zpc1900 ######################################################################### ## 74xx/7xx Systems diff --git a/README b/README index 9049f3a072..131d10f757 100644 --- a/README +++ b/README @@ -239,6 +239,7 @@ Directory Hierarchy: - board/westel/ Files specific to boards manufactured by Westel Wireless - board/westel/amx860 Files specific to AMX860 boards - board/utx8245 Files specific to UTX8245 boards +- board/zpc1900 Files specific to Zephyr Engineering ZPC.1900 board Software Configuration: ======================= @@ -355,7 +356,7 @@ The following options need to be configured: CONFIG_IAD210, CONFIG_RPXlite, CONFIG_sbc8260, CONFIG_EBONY, CONFIG_sacsng, CONFIG_FPS860L, CONFIG_V37, CONFIG_ELPT860, CONFIG_CMI, - CONFIG_NETVIA, CONFIG_RBC823 + CONFIG_NETVIA, CONFIG_RBC823, CONFIG_ZPC1900 ARM based boards: ----------------- @@ -393,7 +394,7 @@ The following options need to be configured: Possible values are: CFG_8260ADS - original MPC8260ADS CFG_8266ADS - MPC8266ADS (untested) - CFG_PQ2FADS - PQ2FADS-ZU + CFG_PQ2FADS - PQ2FADS-ZU or PQ2FADS-VR - MPC824X Family Member (if CONFIG_MPC824X is defined) @@ -1943,7 +1944,8 @@ configurations; the following names are supported: GEN860T_config EBONY_config FPS860L_config ELPT860_config cmi_mpc5xx_config NETVIA_config at91rm9200dk_config omap1510inn_config MPC8260ADS_config - omap1610inn_config + omap1610inn_config ZPC1900_config + Note: for some board special configuration names may exist; check if additional information is available from the board vendor; for instance, the TQM8xxL systems run normally at 50 MHz and use a diff --git a/board/zpc1900/Makefile b/board/zpc1900/Makefile new file mode 100644 index 0000000000..cc519d1e27 --- /dev/null +++ b/board/zpc1900/Makefile @@ -0,0 +1,47 @@ + +# +# (C) Copyright 2001 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +OBJS := $(BOARD).o flash.o + +$(LIB): $(OBJS) $(SOBJS) + $(AR) crv $@ $(OBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ + +-include .depend + +######################################################################### diff --git a/board/zpc1900/config.mk b/board/zpc1900/config.mk new file mode 100644 index 0000000000..94cb419664 --- /dev/null +++ b/board/zpc1900/config.mk @@ -0,0 +1,31 @@ +# +# (C) Copyright 2001 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# Modified by, Yuli Barcohen, Arabella Software Ltd. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +# +# ZPC.1900 board +# + +TEXT_BASE = 0xFFF00000 +#TEXT_BASE = 0x03000000 diff --git a/board/zpc1900/flash.c b/board/zpc1900/flash.c new file mode 100644 index 0000000000..d515dbc372 --- /dev/null +++ b/board/zpc1900/flash.c @@ -0,0 +1,818 @@ +/* + * (C) Copyright 2002 + * Brad Kemp, Seranoa Networks, Brad.Kemp@seranoa.com + * + * Copyright (C) 2003 Arabella Software Ltd. + * Yuli Barcohen + * Modified to work with AMD flashes + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include + +#undef DEBUG_FLASH +/* + * This file implements a Common Flash Interface (CFI) driver for U-Boot. + * The width of the port and the width of the chips are determined at initialization. + * These widths are used to calculate the address for access CFI data structures. + * It has been tested on an Intel Strataflash implementation and AMD 29F016D. + * + * References + * JEDEC Standard JESD68 - Common Flash Interface (CFI) + * JEDEC Standard JEP137-A Common Flash Interface (CFI) ID Codes + * Intel Application Note 646 Common Flash Interface (CFI) and Command Sets + * Intel 290667-008 3 Volt Intel StrataFlash Memory datasheet + * + * TODO + * + * Use Primary Extended Query table (PRI) and Alternate Algorithm Query + * Table (ALT) to determine if protection is available + * + * Add support for other command sets Use the PRI and ALT to determine command set + * Verify erase and program timeouts. + */ + +#define FLASH_CMD_CFI 0x98 +#define FLASH_CMD_READ_ID 0x90 +#define FLASH_CMD_RESET 0xff +#define FLASH_CMD_BLOCK_ERASE 0x20 +#define FLASH_CMD_ERASE_CONFIRM 0xD0 +#define FLASH_CMD_WRITE 0x40 +#define FLASH_CMD_PROTECT 0x60 +#define FLASH_CMD_PROTECT_SET 0x01 +#define FLASH_CMD_PROTECT_CLEAR 0xD0 +#define FLASH_CMD_CLEAR_STATUS 0x50 +#define FLASH_CMD_WRITE_TO_BUFFER 0xE8 +#define FLASH_CMD_WRITE_BUFFER_CONFIRM 0xD0 + +#define FLASH_STATUS_DONE 0x80 +#define FLASH_STATUS_ESS 0x40 +#define FLASH_STATUS_ECLBS 0x20 +#define FLASH_STATUS_PSLBS 0x10 +#define FLASH_STATUS_VPENS 0x08 +#define FLASH_STATUS_PSS 0x04 +#define FLASH_STATUS_DPS 0x02 +#define FLASH_STATUS_R 0x01 +#define FLASH_STATUS_PROTECT 0x01 + +#define AMD_CMD_RESET 0xF0 +#define AMD_CMD_WRITE 0xA0 +#define AMD_CMD_ERASE_START 0x80 +#define AMD_CMD_ERASE_SECTOR 0x30 + +#define AMD_STATUS_TOGGLE 0x40 +#define AMD_STATUS_ERROR 0x20 + +#define FLASH_OFFSET_CFI 0x55 +#define FLASH_OFFSET_CFI_RESP 0x10 +#define FLASH_OFFSET_WTOUT 0x1F +#define FLASH_OFFSET_WBTOUT 0x20 +#define FLASH_OFFSET_ETOUT 0x21 +#define FLASH_OFFSET_CETOUT 0x22 +#define FLASH_OFFSET_WMAX_TOUT 0x23 +#define FLASH_OFFSET_WBMAX_TOUT 0x24 +#define FLASH_OFFSET_EMAX_TOUT 0x25 +#define FLASH_OFFSET_CEMAX_TOUT 0x26 +#define FLASH_OFFSET_SIZE 0x27 +#define FLASH_OFFSET_INTERFACE 0x28 +#define FLASH_OFFSET_BUFFER_SIZE 0x2A +#define FLASH_OFFSET_NUM_ERASE_REGIONS 0x2C +#define FLASH_OFFSET_ERASE_REGIONS 0x2D +#define FLASH_OFFSET_PROTECT 0x02 +#define FLASH_OFFSET_USER_PROTECTION 0x85 +#define FLASH_OFFSET_INTEL_PROTECTION 0x81 + + +#define FLASH_MAN_CFI 0x01000000 + + +typedef union { + unsigned char c; + unsigned short w; + unsigned long l; +} cfiword_t; + +typedef union { + volatile unsigned char *cp; + volatile unsigned short *wp; + volatile unsigned long *lp; +} cfiptr_t; + +#define NUM_ERASE_REGIONS 4 + +static ulong bank_base[CFG_MAX_FLASH_BANKS] = CFG_FLASH_BANKS_LIST; + +flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ + +/*----------------------------------------------------------------------- + * Functions + */ + + +static void flash_add_byte(flash_info_t *info, cfiword_t * cword, uchar c); +static void flash_make_cmd(flash_info_t * info, uchar cmd, void * cmdbuf); +static void flash_write_cmd(flash_info_t * info, int sect, uint offset, uchar cmd); +static void flash_unlock_seq(flash_info_t *info); +static int flash_isequal(flash_info_t * info, int sect, uint offset, uchar cmd); +static int flash_isset(flash_info_t * info, int sect, uint offset, uchar cmd); +static int flash_toggle(flash_info_t * info, int sect, uint offset, uchar cmd); +static int flash_detect_cfi(flash_info_t * info); +static ulong flash_get_size (ulong base, int banknum); +static int flash_write_cfiword (flash_info_t *info, ulong dest, cfiword_t cword); +static int flash_full_status_check(flash_info_t * info, ulong sector, ulong tout, char * prompt); +#ifdef CFG_FLASH_USE_BUFFER_WRITE +static int flash_write_cfibuffer(flash_info_t * info, ulong dest, uchar * cp, int len); +#endif +/*----------------------------------------------------------------------- + * create an address based on the offset and the port width + */ +inline uchar * flash_make_addr(flash_info_t * info, int sect, uint offset) +{ + return ((uchar *)(info->start[sect] + (offset * info->portwidth))); +} +/*----------------------------------------------------------------------- + * read a character at a port width address + */ +inline uchar flash_read_uchar(flash_info_t * info, uint offset) +{ + uchar *cp; + cp = flash_make_addr(info, 0, offset); + return (cp[info->portwidth - 1]); +} + +/*----------------------------------------------------------------------- + * read a short word by swapping for ppc format. + */ +ushort flash_read_ushort(flash_info_t * info, int sect, uint offset) +{ + uchar * addr; + + addr = flash_make_addr(info, sect, offset); + return ((addr[(2*info->portwidth) - 1] << 8) | addr[info->portwidth - 1]); + +} + +/*----------------------------------------------------------------------- + * read a long word by picking the least significant byte of each maiximum + * port size word. Swap for ppc format. + */ +ulong flash_read_long(flash_info_t * info, int sect, uint offset) +{ + uchar * addr; + + addr = flash_make_addr(info, sect, offset); + return ( (addr[(2*info->portwidth) - 1] << 24 ) | (addr[(info->portwidth) -1] << 16) | + (addr[(4*info->portwidth) - 1] << 8) | addr[(3*info->portwidth) - 1]); + +} + +/*----------------------------------------------------------------------- + */ +unsigned long flash_init (void) +{ + unsigned long size = 0; + int i; + + /* Init: no FLASHes known */ + for (i=0; i= CFG_FLASH_BASE) + flash_protect(FLAG_PROTECT_SET, + CFG_MONITOR_BASE, + CFG_MONITOR_BASE + monitor_flash_len - 1, + &flash_info[0]); +#endif + + return (size); +} + +/*----------------------------------------------------------------------- + */ +int flash_erase (flash_info_t *info, int s_first, int s_last) +{ + int rcode = 0; + int prot; + int sect; + + if( info->flash_id != FLASH_MAN_CFI) { + printf ("Can't erase unknown flash type - aborted\n"); + return 1; + } + if ((s_first < 0) || (s_first > s_last)) { + printf ("- no sectors to erase\n"); + return 1; + } + + prot = 0; + for (sect=s_first; sect<=s_last; ++sect) { + if (info->protect[sect]) { + prot++; + } + } + if (prot) { + printf ("- Warning: %d protected sectors will not be erased!\n", + prot); + } else { + printf ("\n"); + } + + + for (sect = s_first; sect<=s_last; sect++) { + if (info->protect[sect] == 0) { /* not protected */ +#ifdef INTEL_COMMANDS + flash_write_cmd(info, sect, 0, FLASH_CMD_CLEAR_STATUS); + flash_write_cmd(info, sect, 0, FLASH_CMD_BLOCK_ERASE); + flash_write_cmd(info, sect, 0, FLASH_CMD_ERASE_CONFIRM); +#else + flash_unlock_seq(info); + flash_write_cmd(info, sect, 0x555, AMD_CMD_ERASE_START); + flash_unlock_seq(info); + flash_write_cmd(info, sect, 0, AMD_CMD_ERASE_SECTOR); +#endif + + if(flash_full_status_check(info, sect, info->erase_blk_tout, "erase")) { + rcode = 1; + } else + printf("."); + } + } + printf (" done\n"); + return rcode; +} + +/*----------------------------------------------------------------------- + */ +void flash_print_info (flash_info_t *info) +{ + int i; + + if (info->flash_id != FLASH_MAN_CFI) { + printf ("missing or unknown FLASH type\n"); + return; + } + + printf("CFI conformant FLASH (%d x %d)", + (info->portwidth << 3 ), (info->chipwidth << 3 )); + printf (" Size: %ld MB in %d Sectors\n", + info->size >> 20, info->sector_count); + printf(" Erase timeout %ld ms, write timeout %ld ms, buffer write timeout %ld ms, buffer size %d\n", + info->erase_blk_tout, info->write_tout, info->buffer_write_tout, info->buffer_size); + + printf (" Sector Start Addresses:"); + for (i=0; isector_count; ++i) { + if ((i % 5) == 0) + printf ("\n"); + printf (" %08lX%5s", + info->start[i], + info->protect[i] ? " (RO)" : " " + ); + } + printf ("\n"); + return; +} + +/*----------------------------------------------------------------------- + * Copy memory to flash, returns: + * 0 - OK + * 1 - write timeout + * 2 - Flash not erased + */ +int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) +{ + ulong wp; + ulong cp; + int aln; + cfiword_t cword; + int i, rc; + + /* get lower aligned address */ + wp = (addr & ~(info->portwidth - 1)); + + /* handle unaligned start */ + if((aln = addr - wp) != 0) { + cword.l = 0; + cp = wp; + for(i=0;iportwidth) && (cnt > 0) ; i++) { + flash_add_byte(info, &cword, *src++); + cnt--; + cp++; + } + for(; (cnt == 0) && (i < info->portwidth); ++i, ++cp) + flash_add_byte(info, &cword, (*(uchar *)cp)); + if((rc = flash_write_cfiword(info, wp, cword)) != 0) + return rc; + wp = cp; + } + +#ifdef CFG_FLASH_USE_BUFFER_WRITE + while(cnt >= info->portwidth) { + i = info->buffer_size > cnt? cnt: info->buffer_size; + if((rc = flash_write_cfibuffer(info, wp, src,i)) != ERR_OK) + return rc; + wp += i; + src += i; + cnt -=i; + } +#else + /* handle the aligned part */ + while(cnt >= info->portwidth) { + cword.l = 0; + for(i = 0; i < info->portwidth; i++) { + flash_add_byte(info, &cword, *src++); + } + if((rc = flash_write_cfiword(info, wp, cword)) != 0) + return rc; + wp += info->portwidth; + cnt -= info->portwidth; + } +#endif /* CFG_FLASH_USE_BUFFER_WRITE */ + if (cnt == 0) { + return (0); + } + + /* + * handle unaligned tail bytes + */ + cword.l = 0; + for (i=0, cp=wp; (iportwidth) && (cnt>0); ++i, ++cp) { + flash_add_byte(info, &cword, *src++); + --cnt; + } + for (; iportwidth; ++i, ++cp) { + flash_add_byte(info, & cword, (*(uchar *)cp)); + } + + return flash_write_cfiword(info, wp, cword); +} + +/*----------------------------------------------------------------------- + */ +#ifdef CFG_FLASH_PROTECTION + +int flash_real_protect(flash_info_t *info, long sector, int prot) +{ + int retcode = 0; + + flash_write_cmd(info, sector, 0, FLASH_CMD_CLEAR_STATUS); + flash_write_cmd(info, sector, 0, FLASH_CMD_PROTECT); + if(prot) + flash_write_cmd(info, sector, 0, FLASH_CMD_PROTECT_SET); + else + flash_write_cmd(info, sector, 0, FLASH_CMD_PROTECT_CLEAR); + + if((retcode = flash_full_status_check(info, sector, info->erase_blk_tout, + prot?"protect":"unprotect")) == 0) { + + info->protect[sector] = prot; + /* Intel's unprotect unprotects all locking */ + if(prot == 0) { + int i; + for(i = 0 ; isector_count; i++) { + if(info->protect[i]) + flash_real_protect(info, i, 1); + } + } + } + + return retcode; +} + +#endif /* CFG_FLASH_PROTECTION */ +/*----------------------------------------------------------------------- + * wait for XSR.7 to be set. Time out with an error if it does not. + * This routine does not set the flash to read-array mode. + */ +static int flash_status_check(flash_info_t * info, ulong sector, ulong tout, char * prompt) +{ + ulong start; + + /* Wait for command completion */ + start = get_timer (0); + while ( +#ifdef INTEL_COMMANDS + !flash_isset(info, sector, 0, FLASH_STATUS_DONE) +#else + flash_toggle(info, sector, 0, AMD_STATUS_TOGGLE) +#endif + ) { + if (get_timer(start) > info->erase_blk_tout) { + printf("Flash %s timeout at address %lx\n", prompt, info->start[sector]); +#ifdef INTEL_COMMANDS + flash_write_cmd(info, sector, 0, FLASH_CMD_RESET); +#else + flash_write_cmd(info, sector, 0, AMD_CMD_RESET); +#endif + return ERR_TIMOUT; + } + } + return ERR_OK; +} +/*----------------------------------------------------------------------- + * Wait for XSR.7 to be set, if it times out print an error, otherwise do a full status check. + * This routine sets the flash to read-array mode. + */ +static int flash_full_status_check(flash_info_t * info, ulong sector, ulong tout, char * prompt) +{ + int retcode; + retcode = flash_status_check(info, sector, tout, prompt); +#ifdef INTEL_COMMANDS + if((retcode == ERR_OK) && !flash_isequal(info,sector, 0, FLASH_STATUS_DONE)) { + retcode = ERR_INVAL; + printf("Flash %s error at address %lx\n", prompt,info->start[sector]); + if(flash_isset(info, sector, 0, FLASH_STATUS_ECLBS | FLASH_STATUS_PSLBS)){ + printf("Command Sequence Error.\n"); + } else if(flash_isset(info, sector, 0, FLASH_STATUS_ECLBS)){ + printf("Block Erase Error.\n"); + retcode = ERR_NOT_ERASED; + } else if (flash_isset(info, sector, 0, FLASH_STATUS_PSLBS)) { + printf("Locking Error\n"); + } + if(flash_isset(info, sector, 0, FLASH_STATUS_DPS)){ + printf("Block locked.\n"); + retcode = ERR_PROTECTED; + } + if(flash_isset(info, sector, 0, FLASH_STATUS_VPENS)) + printf("Vpp Low Error.\n"); + } + flash_write_cmd(info, sector, 0, FLASH_CMD_RESET); +#endif + return retcode; +} +/*----------------------------------------------------------------------- + */ +static void flash_add_byte(flash_info_t *info, cfiword_t * cword, uchar c) +{ + switch(info->portwidth) { + case FLASH_CFI_8BIT: + cword->c = c; + break; + case FLASH_CFI_16BIT: + cword->w = (cword->w << 8) | c; + break; + case FLASH_CFI_32BIT: + cword->l = (cword->l << 8) | c; + } +} + + +/*----------------------------------------------------------------------- + * make a proper sized command based on the port and chip widths + */ +static void flash_make_cmd(flash_info_t * info, uchar cmd, void * cmdbuf) +{ + int i; + uchar *cp = (uchar *)cmdbuf; + for(i=0; i< info->portwidth; i++) + *cp++ = ((i+1) % info->chipwidth) ? '\0':cmd; +} + +/* + * Write a proper sized command to the correct address + */ +static void flash_write_cmd(flash_info_t * info, int sect, uint offset, uchar cmd) +{ + + volatile cfiptr_t addr; + cfiword_t cword; + addr.cp = flash_make_addr(info, sect, offset); + flash_make_cmd(info, cmd, &cword); + switch(info->portwidth) { + case FLASH_CFI_8BIT: + *addr.cp = cword.c; + break; + case FLASH_CFI_16BIT: + *addr.wp = cword.w; + break; + case FLASH_CFI_32BIT: + *addr.lp = cword.l; + break; + } +} + +static void flash_unlock_seq(flash_info_t *info) +{ + flash_write_cmd(info, 0, 0x555, 0xAA); + flash_write_cmd(info, 0, 0x2AA, 0x55); +} +/*----------------------------------------------------------------------- + */ +static int flash_isequal(flash_info_t * info, int sect, uint offset, uchar cmd) +{ + cfiptr_t cptr; + cfiword_t cword; + int retval; + cptr.cp = flash_make_addr(info, sect, offset); + flash_make_cmd(info, cmd, &cword); + switch(info->portwidth) { + case FLASH_CFI_8BIT: + retval = (cptr.cp[0] == cword.c); + break; + case FLASH_CFI_16BIT: + retval = (cptr.wp[0] == cword.w); + break; + case FLASH_CFI_32BIT: + retval = (cptr.lp[0] == cword.l); + break; + default: + retval = 0; + break; + } + return retval; +} +/*----------------------------------------------------------------------- + */ +static int flash_isset(flash_info_t * info, int sect, uint offset, uchar cmd) +{ + cfiptr_t cptr; + cfiword_t cword; + int retval; + cptr.cp = flash_make_addr(info, sect, offset); + flash_make_cmd(info, cmd, &cword); + switch(info->portwidth) { + case FLASH_CFI_8BIT: + retval = ((cptr.cp[0] & cword.c) == cword.c); + break; + case FLASH_CFI_16BIT: + retval = ((cptr.wp[0] & cword.w) == cword.w); + break; + case FLASH_CFI_32BIT: + retval = ((cptr.lp[0] & cword.l) == cword.l); + break; + default: + retval = 0; + break; + } + return retval; +} + +/*----------------------------------------------------------------------- + */ +static int flash_toggle(flash_info_t * info, int sect, uint offset, uchar cmd) +{ + cfiptr_t cptr; + cfiword_t cword; + int retval; + cptr.cp = flash_make_addr(info, sect, offset); + flash_make_cmd(info, cmd, &cword); + switch(info->portwidth) { + case FLASH_CFI_8BIT: + retval = ((cptr.cp[0] & cword.c) != (cptr.cp[0] & cword.c)); + break; + case FLASH_CFI_16BIT: + retval = ((cptr.wp[0] & cword.w) != (cptr.wp[0] & cword.w)); + break; + case FLASH_CFI_32BIT: + retval = ((cptr.lp[0] & cword.l) != (cptr.lp[0] & cword.l)); + break; + default: + retval = 0; + break; + } + return retval; +} + +/*----------------------------------------------------------------------- + * detect if flash is compatible with the Common Flash Interface (CFI) + * http://www.jedec.org/download/search/jesd68.pdf + * +*/ +static int flash_detect_cfi(flash_info_t * info) +{ + + for(info->portwidth=FLASH_CFI_8BIT; info->portwidth <= FLASH_CFI_32BIT; + info->portwidth <<= 1) { + for(info->chipwidth =FLASH_CFI_BY8; + info->chipwidth <= info->portwidth; + info->chipwidth <<= 1) { + flash_write_cmd(info, 0, 0, FLASH_CMD_RESET); + flash_write_cmd(info, 0, FLASH_OFFSET_CFI, FLASH_CMD_CFI); + if(flash_isequal(info, 0, FLASH_OFFSET_CFI_RESP,'Q') && + flash_isequal(info, 0, FLASH_OFFSET_CFI_RESP + 1, 'R') && + flash_isequal(info, 0, FLASH_OFFSET_CFI_RESP + 2, 'Y')) + return 1; + } + } + return 0; +} +/* + * The following code cannot be run from FLASH! + * + */ +static ulong flash_get_size (ulong base, int banknum) +{ + flash_info_t * info = &flash_info[banknum]; + int i, j; + int sect_cnt; + unsigned long sector; + unsigned long tmp; + int size_ratio; + uchar num_erase_regions; + int erase_region_size; + int erase_region_count; + + info->start[0] = base; + + if(flash_detect_cfi(info)){ + size_ratio = info->portwidth / info->chipwidth; + num_erase_regions = flash_read_uchar(info, FLASH_OFFSET_NUM_ERASE_REGIONS); +#ifdef DEBUG_FLASH + printf("found %d erase regions\n", num_erase_regions); +#endif + sect_cnt = 0; + sector = base; + for(i = 0 ; i < num_erase_regions; i++) { + if(i > NUM_ERASE_REGIONS) { + printf("%d erase regions found, only %d used\n", + num_erase_regions, NUM_ERASE_REGIONS); + break; + } + tmp = flash_read_long(info, 0, FLASH_OFFSET_ERASE_REGIONS); + erase_region_size = (tmp & 0xffff)? ((tmp & 0xffff) * 256): 128; + tmp >>= 16; + erase_region_count = (tmp & 0xffff) +1; + for(j = 0; j< erase_region_count; j++) { + info->start[sect_cnt] = sector; + sector += (erase_region_size * size_ratio); + info->protect[sect_cnt] = flash_isset(info, sect_cnt, FLASH_OFFSET_PROTECT, FLASH_STATUS_PROTECT); + sect_cnt++; + } + } + + info->sector_count = sect_cnt; + /* multiply the size by the number of chips */ + info->size = (1 << flash_read_uchar(info, FLASH_OFFSET_SIZE)) * size_ratio; + info->buffer_size = (1 << flash_read_ushort(info, 0, FLASH_OFFSET_BUFFER_SIZE)); + tmp = 1 << flash_read_uchar(info, FLASH_OFFSET_ETOUT); + info->erase_blk_tout = (tmp * (1 << flash_read_uchar(info, FLASH_OFFSET_EMAX_TOUT))); + tmp = 1 << flash_read_uchar(info, FLASH_OFFSET_WBTOUT); + info->buffer_write_tout = (tmp * (1 << flash_read_uchar(info, FLASH_OFFSET_WBMAX_TOUT))); + tmp = 1 << flash_read_uchar(info, FLASH_OFFSET_WTOUT); + info->write_tout = (tmp * (1 << flash_read_uchar(info, FLASH_OFFSET_WMAX_TOUT)))/ 1000; + info->flash_id = FLASH_MAN_CFI; + } + + flash_write_cmd(info, 0, 0, FLASH_CMD_RESET); + return(info->size); +} + + +/*----------------------------------------------------------------------- + */ +static int flash_write_cfiword (flash_info_t *info, ulong dest, cfiword_t cword) +{ + + cfiptr_t ctladdr; + cfiptr_t cptr; + int flag; + + ctladdr.cp = flash_make_addr(info, 0, 0); + cptr.cp = (uchar *)dest; + + + /* Check if Flash is (sufficiently) erased */ + switch(info->portwidth) { + case FLASH_CFI_8BIT: + flag = ((cptr.cp[0] & cword.c) == cword.c); + break; + case FLASH_CFI_16BIT: + flag = ((cptr.wp[0] & cword.w) == cword.w); + break; + case FLASH_CFI_32BIT: + flag = ((cptr.lp[0] & cword.l) == cword.l); + break; + default: + return 2; + } + if(!flag) + return 2; + + /* Disable interrupts which might cause a timeout here */ + flag = disable_interrupts(); + +#ifdef INTEL_COMMANDS + flash_write_cmd(info, 0, 0, FLASH_CMD_CLEAR_STATUS); + flash_write_cmd(info, 0, 0, FLASH_CMD_WRITE); +#else + flash_unlock_seq(info); + flash_write_cmd(info, 0, 0x555, AMD_CMD_WRITE); +#endif + + switch(info->portwidth) { + case FLASH_CFI_8BIT: + cptr.cp[0] = cword.c; + break; + case FLASH_CFI_16BIT: + cptr.wp[0] = cword.w; + break; + case FLASH_CFI_32BIT: + cptr.lp[0] = cword.l; + break; + } + + /* re-enable interrupts if necessary */ + if(flag) + enable_interrupts(); + + return flash_full_status_check(info, 0, info->write_tout, "write"); +} + +#ifdef CFG_FLASH_USE_BUFFER_WRITE + +/* loop through the sectors from the highest address + * when the passed address is greater or equal to the sector address + * we have a match + */ +static int find_sector(flash_info_t *info, ulong addr) +{ + int sector; + for(sector = info->sector_count - 1; sector >= 0; sector--) { + if(addr >= info->start[sector]) + break; + } + return sector; +} + +static int flash_write_cfibuffer(flash_info_t * info, ulong dest, uchar * cp, int len) +{ + + int sector; + int cnt; + int retcode; + volatile cfiptr_t src; + volatile cfiptr_t dst; + + src.cp = cp; + dst.cp = (uchar *)dest; + sector = find_sector(info, dest); + flash_write_cmd(info, sector, 0, FLASH_CMD_CLEAR_STATUS); + flash_write_cmd(info, sector, 0, FLASH_CMD_WRITE_TO_BUFFER); + if((retcode = flash_status_check(info, sector, info->buffer_write_tout, + "write to buffer")) == ERR_OK) { + switch(info->portwidth) { + case FLASH_CFI_8BIT: + cnt = len; + break; + case FLASH_CFI_16BIT: + cnt = len >> 1; + break; + case FLASH_CFI_32BIT: + cnt = len >> 2; + break; + default: + return ERR_INVAL; + break; + } + flash_write_cmd(info, sector, 0, (uchar)cnt-1); + while(cnt-- > 0) { + switch(info->portwidth) { + case FLASH_CFI_8BIT: + *dst.cp++ = *src.cp++; + break; + case FLASH_CFI_16BIT: + *dst.wp++ = *src.wp++; + break; + case FLASH_CFI_32BIT: + *dst.lp++ = *src.lp++; + break; + default: + return ERR_INVAL; + break; + } + } + flash_write_cmd(info, sector, 0, FLASH_CMD_WRITE_BUFFER_CONFIRM); + retcode = flash_full_status_check(info, sector, info->buffer_write_tout, + "buffer write"); + } + flash_write_cmd(info, sector, 0, FLASH_CMD_CLEAR_STATUS); + return retcode; +} +#endif /* CFG_USE_FLASH_BUFFER_WRITE */ diff --git a/board/zpc1900/u-boot.lds b/board/zpc1900/u-boot.lds new file mode 100644 index 0000000000..d6f35f31e0 --- /dev/null +++ b/board/zpc1900/u-boot.lds @@ -0,0 +1,122 @@ +/* + * (C) Copyright 2001 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Modified by Yuli Barcohen + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc) +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + cpu/mpc8260/start.o (.text) + *(.text) + *(.fixup) + *(.got1) + . = ALIGN(16); + *(.rodata) + *(.rodata1) + *(.rodata.str1.4) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x0FFF) & 0xFFFFF000; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2; + __fixup_entries = (. - _FIXUP_TABLE_) >> 2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(4096); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(4096); + __init_end = .; + + __bss_start = .; + .bss : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } + _end = . ; + PROVIDE (end = .); +} +ENTRY(_start) diff --git a/board/zpc1900/zpc1900.c b/board/zpc1900/zpc1900.c new file mode 100644 index 0000000000..6d16a0d192 --- /dev/null +++ b/board/zpc1900/zpc1900.c @@ -0,0 +1,308 @@ +/* + * (C) Copyright 2001-2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2003 Arabella Software Ltd. + * Yuli Barcohen + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include + +/* + * I/O Port configuration table + * + * if conf is 1, then that port pin will be configured at boot time + * according to the five values podr/pdir/ppar/psor/pdat for that entry + */ + +const iop_conf_t iop_conf_tab[4][32] = { + + /* Port A */ + { /* conf ppar psor pdir podr pdat */ + /* PA31 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 TxENB */ + /* PA30 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 TxClav */ + /* PA29 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 TxSOC */ + /* PA28 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 RxENB */ + /* PA27 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 RxSOC */ + /* PA26 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 RxClav */ + /* PA25 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[0] */ + /* PA24 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[1] */ + /* PA23 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[2] */ + /* PA22 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[3] */ + /* PA21 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[4] */ + /* PA20 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[5] */ + /* PA19 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[6] */ + /* PA18 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[7] */ + /* PA17 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[7] */ + /* PA16 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[6] */ + /* PA15 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[5] */ + /* PA14 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[4] */ + /* PA13 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[3] */ + /* PA12 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[2] */ + /* PA11 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[1] */ + /* PA10 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[0] */ + /* PA9 */ { 0, 1, 1, 1, 0, 0 }, /* SMC2 TXD */ + /* PA8 */ { 0, 1, 1, 0, 0, 0 }, /* SMC2 RXD */ + /* PA7 */ { 0, 0, 0, 0, 0, 0 }, /* PA7 */ + /* PA6 */ { 0, 0, 0, 0, 0, 0 }, /* PA6 */ + /* PA5 */ { 0, 0, 0, 0, 0, 0 }, /* PA5 */ + /* PA4 */ { 0, 0, 0, 0, 0, 0 }, /* PA4 */ + /* PA3 */ { 0, 0, 0, 0, 0, 0 }, /* PA3 */ + /* PA2 */ { 0, 0, 0, 0, 0, 0 }, /* PA2 */ + /* PA1 */ { 0, 0, 0, 0, 0, 0 }, /* PA1 */ + /* PA0 */ { 0, 0, 0, 0, 0, 0 } /* PA0 */ + }, + + /* Port B */ + { /* conf ppar psor pdir podr pdat */ + /* PB31 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TX_ER */ + /* PB30 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_DV */ + /* PB29 */ { 1, 1, 1, 1, 0, 0 }, /* FCC2 MII TX_EN */ + /* PB28 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_ER */ + /* PB27 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII COL */ + /* PB26 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII CRS */ + /* PB25 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[3] */ + /* PB24 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[2] */ + /* PB23 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[1] */ + /* PB22 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[0] */ + /* PB21 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[0] */ + /* PB20 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[1] */ + /* PB19 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[2] */ + /* PB18 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[3] */ + /* PB17 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RX_DIV */ + /* PB16 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RX_ERR */ + /* PB15 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TX_ERR */ + /* PB14 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TX_EN */ + /* PB13 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:COL */ + /* PB12 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:CRS */ + /* PB11 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RXD */ + /* PB10 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RXD */ + /* PB9 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RXD */ + /* PB8 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RXD */ + /* PB7 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TXD */ + /* PB6 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TXD */ + /* PB5 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TXD */ + /* PB4 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TXD */ + /* PB3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ + /* PB2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ + /* PB1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ + /* PB0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */ + }, + + /* Port C */ + { /* conf ppar psor pdir podr pdat */ + /* PC31 */ { 0, 0, 0, 0, 0, 0 }, /* PC31 */ + /* PC30 */ { 0, 0, 0, 0, 0, 0 }, /* PC30 */ + /* PC29 */ { 0, 1, 1, 0, 0, 0 }, /* SCC1 EN CLSN */ + /* PC28 */ { 0, 0, 0, 0, 0, 0 }, /* PC28 */ + /* PC27 */ { 0, 0, 0, 0, 0, 0 }, /* PC27 */ + /* PC26 */ { 0, 0, 0, 0, 0, 0 }, /* PC26 */ + /* PC25 */ { 0, 0, 0, 0, 0, 0 }, /* PC25 */ + /* PC24 */ { 0, 0, 0, 0, 0, 0 }, /* PC24 */ + /* PC23 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN RXCLK */ + /* PC22 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN TXCLK */ + /* PC21 */ { 0, 0, 0, 0, 0, 0 }, /* PC21 */ + /* PC20 */ { 0, 0, 0, 0, 0, 0 }, /* PC20 */ + /* PC19 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII Rx Clock (CLK13) */ + /* PC18 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII Tx Clock (CLK14) */ + /* PC17 */ { 0, 0, 0, 0, 0, 0 }, /* PC17 */ + /* PC16 */ { 0, 0, 0, 0, 0, 0 }, /* PC16 */ + /* PC15 */ { 0, 0, 0, 0, 0, 0 }, /* PC15 */ + /* PC14 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN RENA */ + /* PC13 */ { 0, 0, 0, 0, 0, 0 }, /* PC13 */ + /* PC12 */ { 0, 0, 0, 0, 0, 0 }, /* PC12 */ + /* PC11 */ { 0, 0, 0, 0, 0, 0 }, /* PC11 */ + /* PC10 */ { 1, 0, 0, 1, 0, 0 }, /* LXT972 MDC */ + /* PC9 */ { 1, 0, 0, 0, 0, 0 }, /* LXT972 MDIO */ + /* PC8 */ { 0, 0, 0, 0, 0, 0 }, /* PC8 */ + /* PC7 */ { 0, 0, 0, 0, 0, 0 }, /* PC7 */ + /* PC6 */ { 0, 0, 0, 0, 0, 0 }, /* PC6 */ + /* PC5 */ { 0, 0, 0, 0, 0, 0 }, /* PC5 */ + /* PC4 */ { 0, 0, 0, 0, 0, 0 }, /* PC4 */ + /* PC3 */ { 0, 0, 0, 0, 0, 0 }, /* PC3 */ + /* PC2 */ { 0, 0, 0, 0, 0, 0 }, /* PC2 */ + /* PC1 */ { 0, 0, 0, 0, 0, 0 }, /* PC1 */ + /* PC0 */ { 0, 0, 0, 0, 0, 0 }, /* PC0 */ + }, + + /* Port D */ + { /* conf ppar psor pdir podr pdat */ + /* PD31 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN RxD */ + /* PD30 */ { 0, 1, 1, 1, 0, 0 }, /* SCC1 EN TxD */ + /* PD29 */ { 0, 1, 0, 1, 0, 0 }, /* SCC1 EN TENA */ + /* PD28 */ { 0, 0, 0, 0, 0, 0 }, /* PD28 */ + /* PD27 */ { 0, 0, 0, 0, 0, 0 }, /* PD27 */ + /* PD26 */ { 0, 0, 0, 0, 0, 0 }, /* PD26 */ + /* PD25 */ { 0, 0, 0, 0, 0, 0 }, /* PD25 */ + /* PD24 */ { 0, 0, 0, 0, 0, 0 }, /* PD24 */ + /* PD23 */ { 0, 0, 0, 0, 0, 0 }, /* PD23 */ + /* PD22 */ { 0, 0, 0, 0, 0, 0 }, /* PD22 */ + /* PD21 */ { 0, 0, 0, 0, 0, 0 }, /* PD21 */ + /* PD20 */ { 0, 0, 0, 0, 0, 0 }, /* PD20 */ + /* PD19 */ { 0, 0, 0, 0, 0, 0 }, /* PD19 */ + /* PD18 */ { 0, 0, 0, 0, 0, 0 }, /* PD18 */ + /* PD17 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXPRTY */ + /* PD16 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXPRTY */ + /* PD15 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SDA */ + /* PD14 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SCL */ + /* PD13 */ { 0, 0, 0, 0, 0, 0 }, /* PD13 */ + /* PD12 */ { 0, 0, 0, 0, 0, 0 }, /* PD12 */ + /* PD11 */ { 0, 0, 0, 0, 0, 0 }, /* PD11 */ + /* PD10 */ { 0, 0, 0, 0, 0, 0 }, /* PD10 */ + /* PD9 */ { 1, 1, 0, 1, 0, 0 }, /* SMC1 TXD */ + /* PD8 */ { 1, 1, 0, 0, 0, 0 }, /* SMC1 RXD */ + /* PD7 */ { 0, 0, 0, 0, 0, 0 }, /* PD7 */ + /* PD6 */ { 0, 0, 0, 0, 0, 0 }, /* PD6 */ + /* PD5 */ { 0, 0, 0, 0, 0, 0 }, /* PD5 */ + /* PD4 */ { 0, 0, 0, 0, 0, 0 }, /* PD4 */ + /* PD3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ + /* PD2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ + /* PD1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ + /* PD0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */ + } +}; + +#ifdef CFG_NVRAM_ACCESS_ROUTINE +void *nvram_read(void *dest, long src, size_t count) +{ + return memcpy(dest, (const void *)src, count); +} + +void nvram_write(long dest, const void *src, size_t count) +{ + vu_char *p1 = (vu_char *)(CFG_EEPROM + 0x1555); + vu_char *p2 = (vu_char *)(CFG_EEPROM + 0x0AAA); + vu_char *d = (vu_char *)dest; + const uchar *s = (const uchar *)src; + + /* Unprotect the EEPROM */ + *p1 = 0xAA; + *p2 = 0x55; + *p1 = 0x80; + *p1 = 0xAA; + *p2 = 0x55; + *p1 = 0x20; + udelay(10000); + + /* Write the data to the EEPROM */ + while (count--) { + *d++ = *s++; + while (*(d - 1) != *(s - 1)) + /* wait */; + } + + /* Protect the EEPROM */ + *p1 = 0xAA; + *p2 = 0x55; + *p1 = 0xA0; + udelay(10000); +} +#endif /* CFG_NVRAM_ACCESS_ROUTINE */ + +long int initdram(int board_type) +{ + vu_char *bcsr = (vu_char *)CFG_BCSR; + volatile immap_t *immap = (immap_t *)CFG_IMMR; + volatile memctl8260_t *memctl = &immap->im_memctl; + vu_char *ramaddr; + uchar c = 0xFF; + long int msize = CFG_SDRAM_SIZE; + uint psdmr = CFG_PSDMR; + int i; + + if (bcsr[4] & BCSR_PCI_MODE) { /* PCI mode selected by JP9 */ + immap->im_clkrst.car_sccr |= M826X_SCCR_PCI_MODE_EN; + immap->im_siu_conf.sc_siumcr = + (immap->im_siu_conf.sc_siumcr & ~SIUMCR_LBPC11) + | SIUMCR_LBPC01; + } + +#ifndef CFG_RAMBOOT + immap->im_siu_conf.sc_ppc_acr = 0x03; + immap->im_siu_conf.sc_ppc_alrh = 0x30126745; + immap->im_siu_conf.sc_tescr1 = 0x00004000; + + memctl->memc_mptpr = CFG_MPTPR; + +#ifdef CFG_LSDRAM_BASE + /* + Initialise local bus SDRAM only if the pins + are configured as local bus pins and not as PCI. + */ + if ((immap->im_siu_conf.sc_siumcr & SIUMCR_LBPC11) == SIUMCR_LBPC00) { + memctl->memc_lsrt = CFG_LSRT; + memctl->memc_or4 = 0xFFC01480; + memctl->memc_br4 = CFG_LSDRAM_BASE | 0x00001861; + memctl->memc_lsdmr = CFG_LSDMR | PSDMR_OP_PREA; + ramaddr = (vu_char *)CFG_LSDRAM_BASE; + *ramaddr = c; + memctl->memc_lsdmr = CFG_LSDMR | PSDMR_OP_CBRR; + for (i = 0; i < 8; i++) + *ramaddr = c; + memctl->memc_lsdmr = CFG_LSDMR | PSDMR_OP_MRW; + *ramaddr = c; + memctl->memc_lsdmr = CFG_LSDMR | PSDMR_RFEN; + } +#endif /* CFG_LSDRAM_BASE */ + + /* Initialise 60x bus SDRAM */ + memctl->memc_psrt = CFG_PSRT; + memctl->memc_or2 = 0xFC0028C0; + memctl->memc_br2 = CFG_SDRAM_BASE | 0x00000041; + /* + * The mode data for Mode Register Write command must appear on + * the address lines during a mode-set cycle. It is driven by + * the memory controller, in single PowerQUICC II mode, + * according to PSDMR[CL] and PSDMR[BL] fields. In + * 60x-compatible mode, software must drive the correct value on + * the address lines. BL=0 because for 64-bit port size burst + * length must be 4. + */ + ramaddr = (vu_char *)(CFG_SDRAM_BASE | + ((psdmr & PSDMR_CL_MSK) << 7) | 0x10); + memctl->memc_psdmr = psdmr | PSDMR_OP_PREA; /* Precharge all banks */ + *ramaddr = c; + memctl->memc_psdmr = psdmr | PSDMR_OP_CBRR; /* CBR refresh */ + for (i = 0; i < 8; i++) + *ramaddr = c; + memctl->memc_psdmr = psdmr | PSDMR_OP_MRW; /* Mode Register write */ + *ramaddr = c; + memctl->memc_psdmr = psdmr | PSDMR_RFEN; /* Refresh enable */ + *ramaddr = c; +#endif /* CFG_RAMBOOT */ + + /* Return total 60x bus SDRAM size */ + return msize * 1024 * 1024; +} + +int checkboard(void) +{ + vu_char *bcsr = (vu_char *)CFG_BCSR; + + printf("Board: Zephyr ZPC.1900 Rev. %c\n", bcsr[2] + 0x40); + return 0; +} diff --git a/cpu/mpc8260/cpu.c b/cpu/mpc8260/cpu.c index 2736702595..f4f5279d45 100644 --- a/cpu/mpc8260/cpu.c +++ b/cpu/mpc8260/cpu.c @@ -119,6 +119,9 @@ int checkcpu (void) case 0x0062: printf ("B.1 4K25A"); break; + case 0x0064: + printf ("C.0 5K25A"); + break; case 0x0A00: printf ("0.0 0K49M"); break; diff --git a/include/cmd_confdefs.h b/include/cmd_confdefs.h index d7f1fd4fed..ebea56b844 100644 --- a/include/cmd_confdefs.h +++ b/include/cmd_confdefs.h @@ -120,6 +120,7 @@ CFG_CMD_PCI | \ CFG_CMD_PCMCIA | \ CFG_CMD_PING | \ + CFG_CMD_PORTIO | \ CFG_CMD_REGINFO | \ CFG_CMD_SAVES | \ CFG_CMD_SCSI | \ diff --git a/include/configs/ZPC1900.h b/include/configs/ZPC1900.h new file mode 100644 index 0000000000..a46b9fa2a8 --- /dev/null +++ b/include/configs/ZPC1900.h @@ -0,0 +1,283 @@ +/* + * Copyright (C) 2003 Arabella Software Ltd. + * Yuli Barcohen + * + * U-Boot configuration for Zephyr Engineering ZPC.1900 board. + * This port was developed and tested on Revision C board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#define CONFIG_MPC8260 1 /* This is an MPC8260 CPU */ +#define CONFIG_ZPC1900 1 /* ...on Zephyr ZPC.1900 board */ +#define CPU_ID_STR "MPC8265" + +#undef DEBUG + +#undef CONFIG_BOARD_PRE_INIT /* Don't call board_pre_init */ + +/* Allow serial number (serial) and MAC address (ethaddr) to be overwritten */ +#define CONFIG_ENV_OVERWRITE + +/* + * Select serial console configuration + * + * If either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then + * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4 + * for SCC). + */ +#define CONFIG_CONS_ON_SMC /* Console is on SMC */ +#undef CONFIG_CONS_ON_SCC /* It's not on SCC */ +#undef CONFIG_CONS_NONE /* It's not on external UART */ +#define CONFIG_CONS_INDEX 1 /* SMC1 is used for console */ + +/* + * Select ethernet configuration + * + * If either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, + * then CONFIG_ETHER_INDEX must be set to the channel number (1-4 for + * SCC, 1-3 for FCC) + * + * If CONFIG_ETHER_NONE is defined, then either the ethernet routines + * must be defined elsewhere (as for the console), or CFG_CMD_NET must + * be removed from CONFIG_COMMANDS to remove support for networking. + */ +#undef CONFIG_ETHER_ON_SCC /* Ethernet is not on SCC */ +#define CONFIG_ETHER_ON_FCC /* Ethernet is on FCC */ +#undef CONFIG_ETHER_NONE /* No external Ethernet */ + +#ifdef CONFIG_ETHER_ON_FCC + +#define CONFIG_ETHER_INDEX 2 /* FCC2 is used for Ethernet */ + +#if (CONFIG_ETHER_INDEX == 2) +/* + * - Rx clock is CLK13 + * - Tx clock is CLK14 + * - Select bus for bd/buffers (see 28-13) + * - Full duplex + */ +# define CFG_CMXFCR_MASK (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK) +# define CFG_CMXFCR_VALUE (CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14) +# define CFG_CPMFCR_RAMTYPE 0 +# define CFG_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB) + +#endif /* CONFIG_ETHER_INDEX */ + +#define CONFIG_MII /* MII PHY management */ +#define CONFIG_BITBANGMII /* Bit-banged MDIO interface */ +/* + * GPIO pins used for bit-banged MII communications + */ +#define MDIO_PORT 2 /* Port C */ +#define MDIO_ACTIVE (iop->pdir |= 0x00400000) +#define MDIO_TRISTATE (iop->pdir &= ~0x00400000) +#define MDIO_READ ((iop->pdat & 0x00400000) != 0) + +#define MDIO(bit) if(bit) iop->pdat |= 0x00400000; \ + else iop->pdat &= ~0x00400000 + +#define MDC(bit) if(bit) iop->pdat |= 0x00200000; \ + else iop->pdat &= ~0x00200000 + +#define MIIDELAY udelay(1) + +#endif /* CONFIG_ETHER_ON_FCC */ + +#ifndef CONFIG_8260_CLKIN +#define CONFIG_8260_CLKIN 66666666 /* in Hz */ +#endif + +#define CONFIG_BAUDRATE 9600 + +#define CONFIG_COMMANDS (CFG_CMD_ALL & ~( \ + CFG_CMD_BEDBUG | \ + CFG_CMD_BMP | \ + CFG_CMD_BSP | \ + CFG_CMD_DATE | \ + CFG_CMD_DOC | \ + CFG_CMD_DTT | \ + CFG_CMD_EEPROM | \ + CFG_CMD_ELF | \ + CFG_CMD_FAT | \ + CFG_CMD_FDC | \ + CFG_CMD_FDOS | \ + CFG_CMD_HWFLOW | \ + CFG_CMD_I2C | \ + CFG_CMD_IDE | \ + CFG_CMD_JFFS2 | \ + CFG_CMD_KGDB | \ + CFG_CMD_MMC | \ + CFG_CMD_NAND | \ + CFG_CMD_PCI | \ + CFG_CMD_PCMCIA | \ + CFG_CMD_SCSI | \ + CFG_CMD_SPI | \ + CFG_CMD_USB | \ + CFG_CMD_VFD ) ) + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include + +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ +#define CONFIG_BOOTCOMMAND "dhcp;bootm" /* autoboot command */ +#define CONFIG_BOOTARGS "root=/dev/nfs rw ip=:::::eth0:dhcp" + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#undef CONFIG_KGDB_ON_SMC /* define if kgdb on SMC */ +#define CONFIG_KGDB_ON_SCC /* define if kgdb on SCC */ +#undef CONFIG_KGDB_NONE /* define if kgdb on something else */ +#define CONFIG_KGDB_INDEX 2 /* which serial channel for kgdb */ +#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port at */ +#endif + +#define CONFIG_BZIP2 /* include support for bzip2 compressed images */ +#undef CONFIG_WATCHDOG /* disable platform specific watchdog */ + +/* + * Miscellaneous configurable options + */ +#define CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x00100000 /* memtest works on */ +#define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ + +#define CFG_LOAD_ADDR 0x100000 /* default load address */ + +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } + +#define CFG_FLASH_BASE 0xFFE00000 +#define CFG_FLASH_CFI +#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks */ +#define CFG_MAX_FLASH_SECT 32 /* max num of sects on one chip */ + +#define CFG_DEFAULT_IMMR 0x0F010000 + +#define CFG_IMMR 0xF0000000 +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_SDRAM_SIZE 64 +#define CFG_FLSIMM_BASE 0xFC000000 +#define CFG_LSDRAM_BASE 0xFE000000 +#define CFG_BCSR 0xFEA00000 +#define CFG_EEPROM 0xFEB00000 + +#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } + +#define BCSR_PCI_MODE 0x01 + +#define CFG_INIT_RAM_ADDR CFG_IMMR +#define CFG_INIT_RAM_END 0x4000 /* End of used area in DPRAM */ +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +/* Hard reset configuration word */ +#define CFG_HRCW_MASTER (HRCW_EBM | HRCW_BPS01 |\ + HRCW_L2CPC10 | HRCW_DPPC00 | HRCW_ISB010 |\ + HRCW_APPC10 |\ + HRCW_MODCK_H0101 \ + ) /* 0x14820205 */ +/* No slaves */ +#define CFG_HRCW_SLAVE1 0 +#define CFG_HRCW_SLAVE2 0 +#define CFG_HRCW_SLAVE3 0 +#define CFG_HRCW_SLAVE4 0 +#define CFG_HRCW_SLAVE5 0 +#define CFG_HRCW_SLAVE6 0 +#define CFG_HRCW_SLAVE7 0 + +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#define CFG_MONITOR_BASE TEXT_BASE +#if (CFG_MONITOR_BASE < CFG_FLASH_BASE) +#define CFG_RAMBOOT +#endif + +#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +#define CFG_MALLOC_LEN (4096 << 10) /* Reserve 4 MB for malloc() */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +#if !defined(CFG_ENV_IS_IN_FLASH) && !defined(CFG_ENV_IS_IN_NVRAM) +#define CFG_ENV_IS_IN_NVRAM 1 +#endif + +#ifdef CFG_ENV_IS_IN_FLASH +# define CFG_ENV_SECT_SIZE 0x10000 +# define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_ENV_SECT_SIZE) +#else +# define CFG_ENV_ADDR (CFG_EEPROM + 0x400) +# define CFG_ENV_SIZE 0x200 +# define CFG_NVRAM_ACCESS_ROUTINE +#endif + +#define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + +#define CFG_HID0_INIT 0 +#define CFG_HID0_FINAL (HID0_ICE | HID0_IFEM | HID0_ABE ) + +#define CFG_HID2 0 + +#define CFG_SIUMCR 0x42200000 +#define CFG_SYPCR 0xFFFFFFC3 +#define CFG_BCR 0x90400000 +#define CFG_SCCR SCCR_DFBRG01 + +#define CFG_RMR RMR_CSRE +#define CFG_TMCNTSC (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE) +#define CFG_PISCR (PISCR_PS|PISCR_PTF|PISCR_PTE) +#define CFG_RCCR 0 + +#define CFG_PSDMR 0x014EB45A +#define CFG_PSRT 0x0C +#define CFG_LSDMR 0x008AB552 +#define CFG_LSRT 0x0E +#define CFG_MPTPR 0x4000 + +#define CFG_BR0_PRELIM CFG_FLASH_BASE | 0x00000801 +#define CFG_OR0_PRELIM 0xFFE00856 +#define CFG_BR5_PRELIM CFG_EEPROM | 0x00000801 +#define CFG_OR5_PRELIM 0xFFFF03F6 +#define CFG_BR6_PRELIM CFG_FLSIMM_BASE | 0x00000801 +#define CFG_OR6_PRELIM 0xFE000856 +#define CFG_BR7_PRELIM CFG_BCSR | 0x00000801 +#define CFG_OR7_PRELIM 0xFFFF83F6 + +#define CFG_RESET_ADDRESS 0xC0000000 + +#endif /* __CONFIG_H */ -- 2.39.5