From 54afb5002514f88c41f3d462d1e14715a40f4107 Mon Sep 17 00:00:00 2001 From: Vikas Manocha Date: Thu, 2 Jul 2015 18:29:40 -0700 Subject: [PATCH] stv0991: configure clock & pad muxing for qspi stv0991 has cadence qspi controller for flash interfacing, this patch configures the device pads & clock for the controller. Signed-off-by: Vikas Manocha Reviewed-by: Jagannadh Teki --- arch/arm/cpu/armv7/stv0991/clock.c | 4 +++- arch/arm/cpu/armv7/stv0991/pinmux.c | 5 +++++ arch/arm/include/asm/arch-stv0991/stv0991_cgu.h | 15 +++++++++++++++ arch/arm/include/asm/arch-stv0991/stv0991_creg.h | 9 +++++++++ .../arm/include/asm/arch-stv0991/stv0991_periph.h | 2 ++ board/st/stv0991/stv0991.c | 8 ++++++++ 6 files changed, 42 insertions(+), 1 deletion(-) diff --git a/arch/arm/cpu/armv7/stv0991/clock.c b/arch/arm/cpu/armv7/stv0991/clock.c index 70b8a8d984..26c0d3637d 100644 --- a/arch/arm/cpu/armv7/stv0991/clock.c +++ b/arch/arm/cpu/armv7/stv0991/clock.c @@ -33,7 +33,9 @@ void clock_setup(int peripheral) /* Clock selection for ethernet tx_clk & rx_clk*/ writel((readl(&stv0991_cgu_regs->eth_ctrl) & ETH_CLK_MASK) | ETH_CLK_CTRL, &stv0991_cgu_regs->eth_ctrl); - + break; + case QSPI_CLOCK_CFG: + writel(QSPI_CLK_CTRL, &stv0991_cgu_regs->qspi_freq); break; default: break; diff --git a/arch/arm/cpu/armv7/stv0991/pinmux.c b/arch/arm/cpu/armv7/stv0991/pinmux.c index 1d086a235d..24c67faaea 100644 --- a/arch/arm/cpu/armv7/stv0991/pinmux.c +++ b/arch/arm/cpu/armv7/stv0991/pinmux.c @@ -55,6 +55,11 @@ int stv0991_pinmux_config(int peripheral) ETH_M_VDD_CFG, &stv0991_creg->vdd_pad1); break; + case QSPI_CS_CLK_PAD: + writel((readl(&stv0991_creg->mux13) & FLASH_CS_NC_MASK) | + CFG_FLASH_CS_NC, &stv0991_creg->mux13); + writel((readl(&stv0991_creg->mux13) & FLASH_CLK_MASK) | + CFG_FLASH_CLK, &stv0991_creg->mux13); default: break; } diff --git a/arch/arm/include/asm/arch-stv0991/stv0991_cgu.h b/arch/arm/include/asm/arch-stv0991/stv0991_cgu.h index ddcbb57a92..f0045f3e04 100644 --- a/arch/arm/include/asm/arch-stv0991/stv0991_cgu.h +++ b/arch/arm/include/asm/arch-stv0991/stv0991_cgu.h @@ -113,4 +113,19 @@ struct stv0991_cgu_regs { #define ETH_CLK_CTRL (ETH_CLK_RX_EXT_PHY << RX_CLK_SHIFT \ | ETH_CLK_TX_EXT_PHY) +/* CGU qspi clock */ +#define DIV_HCLK1_SHIFT 9 +#define DIV_CRYP_SHIFT 6 +#define MDIV_QSPI_SHIFT 3 + +#define CLK_QSPI_OSC 0 +#define CLK_QSPI_MCLK 1 +#define CLK_QSPI_PLL1 2 +#define CLK_QSPI_PLL2 3 + +#define QSPI_CLK_CTRL (3 << DIV_HCLK1_SHIFT \ + | 1 << DIV_CRYP_SHIFT \ + | 0 << MDIV_QSPI_SHIFT \ + | CLK_QSPI_OSC) + #endif diff --git a/arch/arm/include/asm/arch-stv0991/stv0991_creg.h b/arch/arm/include/asm/arch-stv0991/stv0991_creg.h index c804eb5e4c..737c95253b 100644 --- a/arch/arm/include/asm/arch-stv0991/stv0991_creg.h +++ b/arch/arm/include/asm/arch-stv0991/stv0991_creg.h @@ -49,6 +49,15 @@ struct stv0991_creg { u32 vdd_comp1; /* offset 0x400 */ }; +/* CREG MUX 13 register */ +#define FLASH_CS_NC_SHIFT 4 +#define FLASH_CS_NC_MASK ~(7 << FLASH_CS_NC_SHIFT) +#define CFG_FLASH_CS_NC (0 << FLASH_CS_NC_SHIFT) + +#define FLASH_CLK_SHIFT 0 +#define FLASH_CLK_MASK ~(7 << FLASH_CLK_SHIFT) +#define CFG_FLASH_CLK (0 << FLASH_CLK_SHIFT) + /* CREG MUX 12 register */ #define GPIOC_30_MUX_SHIFT 24 #define GPIOC_30_MUX_MASK ~(1 << GPIOC_30_MUX_SHIFT) diff --git a/arch/arm/include/asm/arch-stv0991/stv0991_periph.h b/arch/arm/include/asm/arch-stv0991/stv0991_periph.h index f728c83cb7..725da838b8 100644 --- a/arch/arm/include/asm/arch-stv0991/stv0991_periph.h +++ b/arch/arm/include/asm/arch-stv0991/stv0991_periph.h @@ -18,6 +18,7 @@ enum periph_id { UART_GPIOC_30_31 = 0, UART_GPIOB_16_17, ETH_GPIOB_10_31_C_0_4, + QSPI_CS_CLK_PAD, PERIPH_ID_I2C0, PERIPH_ID_I2C1, PERIPH_ID_I2C2, @@ -39,6 +40,7 @@ enum periph_id { enum periph_clock { UART_CLOCK_CFG = 0, ETH_CLOCK_CFG, + QSPI_CLOCK_CFG, }; #endif /* __ASM_ARM_ARCH_PERIPH_H */ diff --git a/board/st/stv0991/stv0991.c b/board/st/stv0991/stv0991.c index 09f973f403..add1ce1a79 100644 --- a/board/st/stv0991/stv0991.c +++ b/board/st/stv0991/stv0991.c @@ -55,12 +55,20 @@ int board_eth_enable(void) return 0; } +int board_qspi_enable(void) +{ + stv0991_pinmux_config(QSPI_CS_CLK_PAD); + clock_setup(QSPI_CLOCK_CFG); + return 0; +} + /* * Miscellaneous platform dependent initialisations */ int board_init(void) { board_eth_enable(); + board_qspi_enable(); return 0; } -- 2.39.5