From 54e3316ffa46bd81e55216cd5aa5f087e9de9f8f Mon Sep 17 00:00:00 2001 From: Chris Packham Date: Sun, 3 Jun 2018 16:21:27 +1200 Subject: [PATCH] ARM: kirkwood: SBx81LIFKW: Enable network hardware The SBx81LIFKW boards connect to the internal chassis management network via a Marvell 88e6097 L2 switch. The chassis connections are direct serdes on ports 8 and 9 with a RGMII interface on port 10 connected to the CPU MAC. For debugging purposes ports 0 and 1 are also taken out to headers on the board. Because the debug interfaces are sometimes connected to with straight ribbon cables we need to run them at 10Mbps. Signed-off-by: Chris Packham Reviewed-by: Stefan Roese Signed-off-by: Stefan Roese --- board/alliedtelesis/SBx81LIFKW/sbx81lifkw.c | 14 ++++++++++++-- configs/SBx81LIFKW_defconfig | 6 ++++++ include/configs/SBx81LIFKW.h | 5 ----- 3 files changed, 18 insertions(+), 7 deletions(-) diff --git a/board/alliedtelesis/SBx81LIFKW/sbx81lifkw.c b/board/alliedtelesis/SBx81LIFKW/sbx81lifkw.c index 3cacdc8372..e58bbf07ef 100644 --- a/board/alliedtelesis/SBx81LIFKW/sbx81lifkw.c +++ b/board/alliedtelesis/SBx81LIFKW/sbx81lifkw.c @@ -164,9 +164,15 @@ int board_init(void) return 0; } -#ifdef CONFIG_MV88E61XX_SWITCH -/* Configure and enable Switch and PHY */ +#ifdef CONFIG_RESET_PHY_R +/* automatically defined by kirkwood config.h */ void reset_phy(void) +{ +} +#endif + +#ifdef CONFIG_MV88E61XX_SWITCH +int mv88e61xx_hw_reset(struct phy_device *phydev) { /* Ensure the 88e6097 gets at least 10ms Reset */ @@ -174,6 +180,10 @@ void reset_phy(void) mdelay(20); kw_gpio_set_value(MV88E6097_RESET, 1); mdelay(20); + + phydev->advertising = ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full; + + return 0; } #endif diff --git a/configs/SBx81LIFKW_defconfig b/configs/SBx81LIFKW_defconfig index ec9df1ac69..348f861a14 100644 --- a/configs/SBx81LIFKW_defconfig +++ b/configs/SBx81LIFKW_defconfig @@ -14,6 +14,7 @@ CONFIG_CMD_I2C=y CONFIG_CMD_SF=y CONFIG_CMD_DHCP=y CONFIG_BOOTP_NTPSERVER=y +CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_SNTP=y CONFIG_OF_CONTROL=y @@ -29,5 +30,10 @@ CONFIG_I2C_MUX_PCA954x=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_STMICRO=y # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set +CONFIG_PHYLIB=y +CONFIG_MV88E61XX_SWITCH=y +CONFIG_MV88E61XX_CPU_PORT=10 +CONFIG_MV88E61XX_PHY_PORTS=0x003 +CONFIG_MV88E61XX_FIXED_PORTS=0x300 CONFIG_SPI=y CONFIG_KIRKWOOD_SPI=y diff --git a/include/configs/SBx81LIFKW.h b/include/configs/SBx81LIFKW.h index 756eaa47fa..bcc2c201d2 100644 --- a/include/configs/SBx81LIFKW.h +++ b/include/configs/SBx81LIFKW.h @@ -103,15 +103,10 @@ #define CONFIG_NETCONSOLE /* include NetConsole support */ #define CONFIG_NET_MULTI /* specify more that one ports available */ #define CONFIG_MII /* expose smi over miiphy interface */ -#define CONFIG_PHYLIB #define CONFIG_MVGBE /* Enable kirkwood Gbe Controller Driver */ #define CONFIG_MVGBE_PORTS {1, 0} /* enable a single port */ #define CONFIG_PHY_BASE_ADR 0x01 #define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */ -#define CONFIG_RESET_PHY_R /* use reset_phy() to init switch */ -#define CONFIG_MV88E61XX_SWITCH /* Enable MV88E61XX switch driver */ -#define CONFIG_MV88E61XX_PHY_PORTS 0x303 /* Pt0,1,8,9 */ -#define CONFIG_MV88E61XX_CPU_PORT 10 /* 10(CPU) */ #endif /* CONFIG_CMD_NET */ /* -- 2.39.5