From 5659e7ec4b8354e736a23534063bcef4e61e450e Mon Sep 17 00:00:00 2001 From: richardbarry Date: Sun, 13 Jun 2010 13:53:05 +0000 Subject: [PATCH] Removed outdated AVR32 demo. git-svn-id: https://svn.code.sf.net/p/freertos/code/trunk@1025 1d2547de-c912-0410-9cb9-b8ca96c0e9e2 --- Demo/AVR32_UC3/ParTest/ParTest.c | 117 ------ .../CLASS/DFU/EXAMPLES/ISP/BOOT/trampoline.S | 72 ---- .../DFU/EXAMPLES/ISP/BOOT/trampoline.s82 | 91 ----- .../USB/CLASS/DFU/EXAMPLES/ISP/conf_isp.h | 119 ------ Demo/AVR32_UC3/serial/serial.c | 373 ------------------ 5 files changed, 772 deletions(-) delete mode 100644 Demo/AVR32_UC3/ParTest/ParTest.c delete mode 100644 Demo/AVR32_UC3/SERVICES/USB/CLASS/DFU/EXAMPLES/ISP/BOOT/trampoline.S delete mode 100644 Demo/AVR32_UC3/SERVICES/USB/CLASS/DFU/EXAMPLES/ISP/BOOT/trampoline.s82 delete mode 100644 Demo/AVR32_UC3/SERVICES/USB/CLASS/DFU/EXAMPLES/ISP/conf_isp.h delete mode 100644 Demo/AVR32_UC3/serial/serial.c diff --git a/Demo/AVR32_UC3/ParTest/ParTest.c b/Demo/AVR32_UC3/ParTest/ParTest.c deleted file mode 100644 index fd91e87eb..000000000 --- a/Demo/AVR32_UC3/ParTest/ParTest.c +++ /dev/null @@ -1,117 +0,0 @@ -/*This file has been prepared for Doxygen automatic documentation generation.*/ -/*! \file ********************************************************************* - * - * \brief FreeRTOS LEDs Management for AVR32 UC3. - * - * - Compiler: IAR EWAVR32 and GNU GCC for AVR32 - * - Supported devices: All AVR32 devices can be used. - * - AppNote: - * - * \author Atmel Corporation: http://www.atmel.com \n - * Support and FAQ: http://support.atmel.no/ - * - *****************************************************************************/ - -/* Copyright (c) 2007, Atmel Corporation All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * - * 3. The name of ATMEL may not be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY ATMEL ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY AND - * SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, - * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - - - -#include -#include "FreeRTOS.h" -#include "task.h" -#include "partest.h" - - -/*----------------------------------------------------------- - * Simple parallel port IO routines. - *-----------------------------------------------------------*/ - -#define partstALL_OUTPUTS_OFF ( ( unsigned portCHAR ) 0x00 ) -#if( BOARD==EVK1100 ) -# define partstMAX_OUTPUT_LED ( ( unsigned portCHAR ) 8 ) - -#elif( BOARD==EVK1101 ) -# define partstMAX_OUTPUT_LED ( ( unsigned portCHAR ) 4 ) -#endif - -static volatile unsigned portCHAR ucCurrentOutputValue = partstALL_OUTPUTS_OFF; /*lint !e956 File scope parameters okay here. */ - -/*-----------------------------------------------------------*/ - -void vParTestInitialise( void ) -{ - LED_Display( partstALL_OUTPUTS_OFF ); /* Start with all LEDs off. */ -} -/*-----------------------------------------------------------*/ - -void vParTestSetLED( unsigned portBASE_TYPE uxLED, signed portBASE_TYPE xValue ) -{ -unsigned portCHAR ucBit; - - if( uxLED >= partstMAX_OUTPUT_LED ) - { - return; - } - - ucBit = ( ( unsigned portCHAR ) 1 ) << uxLED; - - vTaskSuspendAll(); - { - if( xValue == pdTRUE ) - { - ucCurrentOutputValue |= ucBit; - } - else - { - ucCurrentOutputValue &= ~ucBit; - } - - LED_Display(ucCurrentOutputValue); - } - xTaskResumeAll(); -} -/*-----------------------------------------------------------*/ - -void vParTestToggleLED( unsigned portBASE_TYPE uxLED ) -{ -unsigned portCHAR ucBit; - - if( uxLED >= partstMAX_OUTPUT_LED ) - { - return; - } - - ucBit = ( ( unsigned portCHAR ) 1 ) << uxLED; - - vTaskSuspendAll(); - { - ucCurrentOutputValue ^= ucBit; - LED_Display(ucCurrentOutputValue); - } - xTaskResumeAll(); -} diff --git a/Demo/AVR32_UC3/SERVICES/USB/CLASS/DFU/EXAMPLES/ISP/BOOT/trampoline.S b/Demo/AVR32_UC3/SERVICES/USB/CLASS/DFU/EXAMPLES/ISP/BOOT/trampoline.S deleted file mode 100644 index 8c4651659..000000000 --- a/Demo/AVR32_UC3/SERVICES/USB/CLASS/DFU/EXAMPLES/ISP/BOOT/trampoline.S +++ /dev/null @@ -1,72 +0,0 @@ -/*This file is prepared for Doxygen automatic documentation generation.*/ -/*! \file ********************************************************************* - * - * \brief AVR32 UC3 ISP trampoline. - * - * In order to be able to program a project with both BatchISP and JTAGICE mkII - * without having to take the general-purpose fuses into consideration, add this - * file to the project and change the program entry point to _trampoline. - * - * The pre-programmed ISP will be erased if JTAGICE mkII is used. - * - * - Compiler: GNU GCC for AVR32 - * - Supported devices: All AVR32UC devices can be used. - * - * \author Atmel Corporation: http://www.atmel.com \n - * Support and FAQ: http://support.atmel.no/ - * - ******************************************************************************/ - -/* Copyright (c) 2007, Atmel Corporation All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * - * 3. The name of ATMEL may not be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY ATMEL ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY AND - * SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, - * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - - -#include "../conf_isp.h" - - -//! @{ -//! \verbatim - - - // This must be linked @ 0x80000000 if it is to be run upon reset. - .section .reset, "ax", @progbits - - - .global _trampoline - .type _trampoline, @function -_trampoline: - // Jump to program start. - rjmp program_start - - .org PROGRAM_START_OFFSET -program_start: - // Jump to the C runtime startup routine. - lda.w pc, _stext - - -//! \endverbatim -//! @} diff --git a/Demo/AVR32_UC3/SERVICES/USB/CLASS/DFU/EXAMPLES/ISP/BOOT/trampoline.s82 b/Demo/AVR32_UC3/SERVICES/USB/CLASS/DFU/EXAMPLES/ISP/BOOT/trampoline.s82 deleted file mode 100644 index b9e03b143..000000000 --- a/Demo/AVR32_UC3/SERVICES/USB/CLASS/DFU/EXAMPLES/ISP/BOOT/trampoline.s82 +++ /dev/null @@ -1,91 +0,0 @@ -/*This file is prepared for Doxygen automatic documentation generation.*/ -/*! \file ********************************************************************* - * - * \brief AVR32 UC3 ISP trampoline. - * - * In order to be able to program a project with both BatchISP and JTAGICE mkII - * without having to take the general-purpose fuses into consideration, add this - * file to the project and change the program entry point to __trampoline. - * - * The pre-programmed ISP will be erased if JTAGICE mkII is used. - * - * - Compiler: IAR EWAVR32 - * - Supported devices: All AVR32UC devices can be used. - * - * \author Atmel Corporation: http://www.atmel.com \n - * Support and FAQ: http://support.atmel.no/ - * - ******************************************************************************/ - -/* Copyright (c) 2007, Atmel Corporation All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * - * 3. The name of ATMEL may not be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY ATMEL ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY AND - * SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, - * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - - -#include "../conf_isp.h" - - -//! @{ -//! \verbatim - - - RSEG SSTACK:DATA:NOROOT(2) - - - // This must be linked @ 0x80000000 if it is to be run upon reset. - RSEG RESET:CODE:NOROOT(1) - - - PUBLIC __trampoline -__trampoline: - // Jump to program start. - rjmp program_start - - ORG PROGRAM_START_OFFSET -program_start: - // Initialize the stack pointer. - lddpc sp, ??SPS - // Jump to the C runtime startup routine. - lddpc pc, ??cmain - - -// Constant data area. - - ALIGN 2 - -??SPS: - DC32 SFE(SSTACK) & ~3 - - EXTERN ?main -??cmain: - DC32 ?main - - - END - - -//! \endverbatim -//! @} diff --git a/Demo/AVR32_UC3/SERVICES/USB/CLASS/DFU/EXAMPLES/ISP/conf_isp.h b/Demo/AVR32_UC3/SERVICES/USB/CLASS/DFU/EXAMPLES/ISP/conf_isp.h deleted file mode 100644 index 05fd4dcf7..000000000 --- a/Demo/AVR32_UC3/SERVICES/USB/CLASS/DFU/EXAMPLES/ISP/conf_isp.h +++ /dev/null @@ -1,119 +0,0 @@ -/*This file is prepared for Doxygen automatic documentation generation.*/ -/*! \file ****************************************************************** - * - * \brief ISP configuration file. - * - * This file contains the possible external configuration of the ISP. - * - * - Compiler: IAR EWAVR32 and GNU GCC for AVR32 - * - Supported devices: All AVR32 devices with a USB module can be used. - * - AppNote: - * - * \author Atmel Corporation: http://www.atmel.com \n - * Support and FAQ: http://support.atmel.no/ - * - ***************************************************************************/ - -/* Copyright (c) 2007, Atmel Corporation All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * - * 3. The name of ATMEL may not be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY ATMEL ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY AND - * SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, - * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - - -#ifndef _CONF_ISP_H_ -#define _CONF_ISP_H_ - -#include -#include "compiler.h" - - -//_____ D E F I N I T I O N S ______________________________________________ - -#define PRODUCT_MANUFACTURER_ID 0x58 -#define PRODUCT_FAMILY_ID 0x20 - -#define ISP_VERSION 0x00 -#define ISP_ID0 0x00 -#define ISP_ID1 0x00 - -#define ISP_GPFB_FORCE 31 -#define ISP_GPFB_FORCE_MASK 0x80000000 -#define ISP_GPFB_FORCE_OFFSET 31 -#define ISP_GPFB_FORCE_SIZE 1 - -#define ISP_GPFB_IO_COND_EN 30 -#define ISP_GPFB_IO_COND_EN_MASK 0x40000000 -#define ISP_GPFB_IO_COND_EN_OFFSET 30 -#define ISP_GPFB_IO_COND_EN_SIZE 1 - -#define ISP_GPFB_BOD_EN 29 -#define ISP_GPFB_BOD_EN_MASK 0x20000000 -#define ISP_GPFB_BOD_EN_OFFSET 29 -#define ISP_GPFB_BOD_EN_SIZE 1 - -#define ISP_CFG (*(volatile U32 *)ISP_CFG_ADDRESS) -#define ISP_CFG_ADDRESS (AVR32_FLASHC_USER_PAGE_ADDRESS + ISP_CFG_OFFSET) -#define ISP_CFG_OFFSET 0x000001FC -#define ISP_CFG_SIZE 4 - -#define ISP_CFG_BOOT_KEY 17 -#define ISP_CFG_BOOT_KEY_MASK 0xFFFE0000 -#define ISP_CFG_BOOT_KEY_OFFSET 17 -#define ISP_CFG_BOOT_KEY_SIZE 15 -#define ISP_CFG_BOOT_KEY_VALUE 0x494F - -#define ISP_CFG_IO_COND_LEVEL 16 -#define ISP_CFG_IO_COND_LEVEL_MASK 0x00010000 -#define ISP_CFG_IO_COND_LEVEL_OFFSET 16 -#define ISP_CFG_IO_COND_LEVEL_SIZE 1 - -#define ISP_CFG_IO_COND_PIN 8 -#define ISP_CFG_IO_COND_PIN_MASK 0x0000FF00 -#define ISP_CFG_IO_COND_PIN_OFFSET 8 -#define ISP_CFG_IO_COND_PIN_SIZE 8 - -#define ISP_CFG_CRC8 0 -#define ISP_CFG_CRC8_MASK 0x000000FF -#define ISP_CFG_CRC8_OFFSET 0 -#define ISP_CFG_CRC8_SIZE 8 -#define ISP_CFG_CRC8_POLYNOMIAL 0x107 - -#define ISP_KEY (*(volatile U32 *)ISP_KEY_ADDRESS) -#define ISP_KEY_ADDRESS (AVR32_SRAM_ADDRESS + ISP_KEY_OFFSET) -#define ISP_KEY_OFFSET 0x00000000 -#define ISP_KEY_SIZE 4 -#define ISP_KEY_VALUE ('I' << 24 | 'S' << 16 | 'P' << 8 | 'K') - -#ifndef ISP_OSC - #define ISP_OSC 0 -#endif - -#define DFU_FRAME_LENGTH 2048 - -#define PROGRAM_START_ADDRESS (AVR32_FLASH_ADDRESS + PROGRAM_START_OFFSET) -#define PROGRAM_START_OFFSET 0x00002000 - - -#endif // _CONF_ISP_H_ diff --git a/Demo/AVR32_UC3/serial/serial.c b/Demo/AVR32_UC3/serial/serial.c deleted file mode 100644 index 83eb4023f..000000000 --- a/Demo/AVR32_UC3/serial/serial.c +++ /dev/null @@ -1,373 +0,0 @@ -/*This file has been prepared for Doxygen automatic documentation generation.*/ -/*! \file ********************************************************************* - * - * \brief FreeRTOS Serial Port management example for AVR32 UC3. - * - * - Compiler: IAR EWAVR32 and GNU GCC for AVR32 - * - Supported devices: All AVR32 devices can be used. - * - AppNote: - * - * \author Atmel Corporation: http://www.atmel.com \n - * Support and FAQ: http://support.atmel.no/ - * - *****************************************************************************/ - -/* Copyright (c) 2007, Atmel Corporation All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * - * 3. The name of ATMEL may not be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY ATMEL ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY AND - * SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, - * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - - -/* - BASIC INTERRUPT DRIVEN SERIAL PORT DRIVER FOR USART. -*/ - -/* Scheduler includes. */ -#include "FreeRTOS.h" -#include "queue.h" -#include "task.h" - -/* Demo application includes. */ -#include "serial.h" -#include -#include "board.h" -#include "gpio.h" - -/*-----------------------------------------------------------*/ - -/* Constants to setup and access the USART. */ -#define serINVALID_COMPORT_HANDLER ( ( xComPortHandle ) 0 ) -#define serINVALID_QUEUE ( ( xQueueHandle ) 0 ) -#define serHANDLE ( ( xComPortHandle ) 1 ) -#define serNO_BLOCK ( ( portTickType ) 0 ) - -/*-----------------------------------------------------------*/ - -/* Queues used to hold received characters, and characters waiting to be -transmitted. */ -static xQueueHandle xRxedChars; -static xQueueHandle xCharsForTx; - -/*-----------------------------------------------------------*/ - -/* Forward declaration. */ -static void vprvSerialCreateQueues( unsigned portBASE_TYPE uxQueueLength, - xQueueHandle *pxRxedChars, - xQueueHandle *pxCharsForTx ); - -/*-----------------------------------------------------------*/ - -#if __GNUC__ - __attribute__((__noinline__)) -#elif __ICCAVR32__ - #pragma optimize = no_inline -#endif - -static portBASE_TYPE prvUSART_ISR_NonNakedBehaviour( void ) -{ - /* Now we can declare the local variables. */ - signed portCHAR cChar; - portBASE_TYPE xHigherPriorityTaskWoken = pdFALSE; - unsigned portLONG ulStatus; - volatile avr32_usart_t *usart = serialPORT_USART; - portBASE_TYPE retstatus; - - /* What caused the interrupt? */ - ulStatus = usart->csr & usart->imr; - - if (ulStatus & AVR32_USART_CSR_TXRDY_MASK) - { - /* The interrupt was caused by the THR becoming empty. Are there any - more characters to transmit? - Because FreeRTOS is not supposed to run with nested interrupts, put all OS - calls in a critical section . */ - portENTER_CRITICAL(); - retstatus = xQueueReceiveFromISR( xCharsForTx, &cChar, &xHigherPriorityTaskWoken ); - portEXIT_CRITICAL(); - - if (retstatus == pdTRUE) - { - /* A character was retrieved from the queue so can be sent to the - THR now. */ - usart->thr = cChar; - } - else - { - /* Queue empty, nothing to send so turn off the Tx interrupt. */ - usart->idr = AVR32_USART_IDR_TXRDY_MASK; - } - } - - if (ulStatus & AVR32_USART_CSR_RXRDY_MASK) - { - /* The interrupt was caused by the receiver getting data. */ - cChar = usart->rhr; //TODO - - /* Because FreeRTOS is not supposed to run with nested interrupts, put all OS - calls in a critical section . */ - portENTER_CRITICAL(); - xQueueSendFromISR(xRxedChars, &cChar, &xHigherPriorityTaskWoken); - portEXIT_CRITICAL(); - } - - /* The return value will be used by portEXIT_SWITCHING_ISR() to know if it - should perform a vTaskSwitchContext(). */ - return ( xHigherPriorityTaskWoken ); -} -/*-----------------------------------------------------------*/ - -/* - * USART interrupt service routine. - */ -#if __GNUC__ - __attribute__((__naked__)) -#elif __ICCAVR32__ - #pragma shadow_registers = full // Naked. -#endif - -static void vUSART_ISR( void ) -{ - /* This ISR can cause a context switch, so the first statement must be a - call to the portENTER_SWITCHING_ISR() macro. This must be BEFORE any - variable declarations. */ - portENTER_SWITCHING_ISR(); - - prvUSART_ISR_NonNakedBehaviour(); - - /* Exit the ISR. If a task was woken by either a character being received - or transmitted then a context switch will occur. */ - portEXIT_SWITCHING_ISR(); -} -/*-----------------------------------------------------------*/ - - -/* - * Init the serial port for the Minimal implementation. - */ -xComPortHandle xSerialPortInitMinimal( unsigned portLONG ulWantedBaud, unsigned portBASE_TYPE uxQueueLength ) -{ -static const gpio_map_t USART_GPIO_MAP = -{ - { serialPORT_USART_RX_PIN, serialPORT_USART_RX_FUNCTION }, - { serialPORT_USART_TX_PIN, serialPORT_USART_TX_FUNCTION } -}; - -xComPortHandle xReturn = serHANDLE; -volatile avr32_usart_t *usart = serialPORT_USART; -int cd; /* USART Clock Divider. */ - - /* Create the rx and tx queues. */ - vprvSerialCreateQueues( uxQueueLength, &xRxedChars, &xCharsForTx ); - - /* Configure USART. */ - if( ( xRxedChars != serINVALID_QUEUE ) && - ( xCharsForTx != serINVALID_QUEUE ) && - ( ulWantedBaud != ( unsigned portLONG ) 0 ) ) - { - portENTER_CRITICAL(); - { - /** - ** Reset USART. - **/ - /* Disable all USART interrupt sources to begin... */ - usart->idr = 0xFFFFFFFF; - - /* Reset mode and other registers that could cause unpredictable - behaviour after reset */ - usart->mr = 0; /* Reset Mode register. */ - usart->rtor = 0; /* Reset Receiver Time-out register. */ - usart->ttgr = 0; /* Reset Transmitter Timeguard register. */ - - /* Shutdown RX and TX, reset status bits, reset iterations in CSR, reset NACK - and turn off DTR and RTS */ - usart->cr = AVR32_USART_CR_RSTRX_MASK | - AVR32_USART_CR_RSTTX_MASK | - AVR32_USART_CR_RXDIS_MASK | - AVR32_USART_CR_TXDIS_MASK | - AVR32_USART_CR_RSTSTA_MASK | - AVR32_USART_CR_RSTIT_MASK | - AVR32_USART_CR_RSTNACK_MASK | - AVR32_USART_CR_DTRDIS_MASK | - AVR32_USART_CR_RTSDIS_MASK; - - /** - ** Configure USART. - **/ - /* Enable USART RXD & TXD pins. */ - gpio_enable_module( USART_GPIO_MAP, sizeof( USART_GPIO_MAP ) / sizeof( USART_GPIO_MAP[0] ) ); - - /* Set the USART baudrate to be as close as possible to the wanted baudrate. */ - /* - * ** BAUDRATE CALCULATION ** - * - * Selected Clock Selected Clock - * baudrate = ---------------- or baudrate = ---------------- - * 16 x CD 8 x CD - * - * (with 16x oversampling) (with 8x oversampling) - */ - - if( ulWantedBaud < ( configCPU_CLOCK_HZ / 16 ) ) - { - /* Use 8x oversampling */ - usart->mr |= (1<brgr = (cd << AVR32_USART_BRGR_CD_OFFSET); - } - else - { - /* Use 16x oversampling */ - usart->mr &= ~(1< 65535 ) - { - /* Baudrate is too low */ - return serINVALID_COMPORT_HANDLER; - } - } - - usart->brgr = (cd << AVR32_USART_BRGR_CD_OFFSET); - - /* Set the USART Mode register: Mode=Normal(0), Clk selection=MCK(0), - CHRL=8, SYNC=0(asynchronous), PAR=None, NBSTOP=1, CHMODE=0, MSBF=0, - MODE9=0, CKLO=0, OVER(previously done when setting the baudrate), - other fields not used in this mode. */ - usart->mr |= ((8-5) << AVR32_USART_MR_CHRL_OFFSET ) | - ( 4 << AVR32_USART_MR_PAR_OFFSET ) | - ( 1 << AVR32_USART_MR_NBSTOP_OFFSET); - - /* Write the Transmit Timeguard Register */ - usart->ttgr = 0; - - - /* Register the USART interrupt handler to the interrupt controller and - enable the USART interrupt. */ - INTC_register_interrupt((__int_handler)&vUSART_ISR, serialPORT_USART_IRQ, INT1); - - /* Enable USART interrupt sources (but not Tx for now)... */ - usart->ier = AVR32_USART_IER_RXRDY_MASK; - - /* Enable receiver and transmitter... */ - usart->cr |= AVR32_USART_CR_TXEN_MASK | AVR32_USART_CR_RXEN_MASK; - } - portEXIT_CRITICAL(); - } - else - { - xReturn = serINVALID_COMPORT_HANDLER; - } - - return xReturn; -} -/*-----------------------------------------------------------*/ - -signed portBASE_TYPE xSerialGetChar( xComPortHandle pxPort, signed portCHAR *pcRxedChar, portTickType xBlockTime ) -{ - /* The port handle is not required as this driver only supports UART0. */ - ( void ) pxPort; - - /* Get the next character from the buffer. Return false if no characters - are available, or arrive before xBlockTime expires. */ - if( xQueueReceive( xRxedChars, pcRxedChar, xBlockTime ) ) - { - return pdTRUE; - } - else - { - return pdFALSE; - } -} -/*-----------------------------------------------------------*/ - -void vSerialPutString( xComPortHandle pxPort, const signed portCHAR * const pcString, unsigned portSHORT usStringLength ) -{ -signed portCHAR *pxNext; - - /* NOTE: This implementation does not handle the queue being full as no - block time is used! */ - - /* The port handle is not required as this driver only supports UART0. */ - ( void ) pxPort; - - /* Send each character in the string, one at a time. */ - pxNext = ( signed portCHAR * ) pcString; - while( *pxNext ) - { - xSerialPutChar( pxPort, *pxNext, serNO_BLOCK ); - pxNext++; - } -} -/*-----------------------------------------------------------*/ - -signed portBASE_TYPE xSerialPutChar( xComPortHandle pxPort, signed portCHAR cOutChar, portTickType xBlockTime ) -{ -volatile avr32_usart_t *usart = serialPORT_USART; - - /* Place the character in the queue of characters to be transmitted. */ - if( xQueueSend( xCharsForTx, &cOutChar, xBlockTime ) != pdPASS ) - { - return pdFAIL; - } - - /* Turn on the Tx interrupt so the ISR will remove the character from the - queue and send it. This does not need to be in a critical section as - if the interrupt has already removed the character the next interrupt - will simply turn off the Tx interrupt again. */ - usart->ier = (1 << AVR32_USART_IER_TXRDY_OFFSET); - - return pdPASS; -} -/*-----------------------------------------------------------*/ - -void vSerialClose( xComPortHandle xPort ) -{ - /* Not supported as not required by the demo application. */ -} -/*-----------------------------------------------------------*/ - -/*###########################################################*/ - -/* - * Create the rx and tx queues. - */ -static void vprvSerialCreateQueues( unsigned portBASE_TYPE uxQueueLength, xQueueHandle *pxRxedChars, xQueueHandle *pxCharsForTx ) -{ - /* Create the queues used to hold Rx and Tx characters. */ - xRxedChars = xQueueCreate( uxQueueLength, ( unsigned portBASE_TYPE ) sizeof( signed portCHAR ) ); - xCharsForTx = xQueueCreate( uxQueueLength + 1, ( unsigned portBASE_TYPE ) sizeof( signed portCHAR ) ); - - /* Pass back a reference to the queues so the serial API file can - post/receive characters. */ - *pxRxedChars = xRxedChars; - *pxCharsForTx = xCharsForTx; -} -/*-----------------------------------------------------------*/ -- 2.39.5