From 57578b4ea3de4aa86c08ad1ab27ab3a704597534 Mon Sep 17 00:00:00 2001 From: oharboe Date: Wed, 19 Aug 2009 06:30:08 +0000 Subject: [PATCH] David Brownell Clean up some Cortex-M3 reset handling. - AIRCR_SYSRESETREQ is generic; use it on any system where SRST won't fly, not just on Stellaris-based ones. - Reformat and improve comments about the Stellaris quirk; and xref the only public docs (an email) about the issue. It seems that *most* Stellaris chips have this problem. Tempest parts aren't yet in general sampling; and if rev B silicon for earlier chips exists, it's not very visible yet. git-svn-id: svn://svn.berlios.de/openocd/trunk@2595 b42882b7-edfa-0310-969c-e2dbd0fdcd60 --- src/target/cortex_m3.c | 56 +++++++++++++++++++++++++++++------------- 1 file changed, 39 insertions(+), 17 deletions(-) diff --git a/src/target/cortex_m3.c b/src/target/cortex_m3.c index 62615743..ea20dfd1 100644 --- a/src/target/cortex_m3.c +++ b/src/target/cortex_m3.c @@ -760,11 +760,14 @@ int cortex_m3_assert_reset(target_t *target) target_state_name(target)); enum reset_types jtag_reset_config = jtag_get_reset_config(); + + /* + * We can reset Cortex-M3 targets using just the NVIC without + * requiring SRST, getting a SoC reset (or a core-only reset) + * instead of a system reset. + */ if (!(jtag_reset_config & RESET_HAS_SRST)) - { - LOG_ERROR("Can't assert SRST"); - return ERROR_FAIL; - } + assert_srst = 0; /* Enable debug requests */ mem_ap_read_atomic_u32(swjdp, DCB_DHCSR, &cortex_m3->dcb_dhcsr); @@ -794,15 +797,21 @@ int cortex_m3_assert_reset(target_t *target) mem_ap_write_atomic_u32(swjdp, DCB_DEMCR, TRCENA | VC_HARDERR | VC_BUSERR | VC_CORERESET); } - /* following hack is to handle luminary reset - * when srst is asserted the luminary device seesm to also clear the debug registers - * which does not match the armv7 debug TRM */ - + /* + * When nRST is asserted on most Stellaris devices, it clears some of + * the debug state. The ARMv7M and Cortex-M3 TRMs say that's wrong; + * and OpenOCD depends on those TRMs. So we won't use SRST on those + * chips. (Only power-on reset should affect debug state, beyond a + * few specified bits; not the chip's nRST input, wired to SRST.) + * + * REVISIT current errata specs don't seem to cover this issue. + * Do we have more details than this email? + * https://lists.berlios.de/pipermail + * /openocd-development/2008-August/003065.html + */ if (strcmp(target->variant, "lm3s") == 0) { - /* get revision of lm3s target, only early silicon has this issue - * Fury Rev B, DustDevil Rev B, Tempest all ok */ - + /* Check for silicon revisions with the issue. */ uint32_t did0; if (target_read_u32(target, 0x400fe000, &did0) == ERROR_OK) @@ -816,10 +825,16 @@ int cortex_m3_assert_reset(target_t *target) case 1: case 3: - /* only Fury/DustDevil rev A suffer reset problems */ + /* Fury and DustDevil rev A have + * this nRST problem. It should + * be fixed in rev B silicon. + */ if (((did0 >> 8) & 0xff) == 0) assert_srst = 0; break; + case 4: + /* Tempest should be fine. */ + break; } } } @@ -838,13 +853,20 @@ int cortex_m3_assert_reset(target_t *target) } else { - /* this causes the luminary device to reset using the watchdog */ - mem_ap_write_atomic_u32(swjdp, NVIC_AIRCR, AIRCR_VECTKEY | AIRCR_SYSRESETREQ); - LOG_DEBUG("Using Luminary Reset: SYSRESETREQ"); + /* Use a standard Cortex-M3 software reset mechanism. + * SYSRESETREQ will reset SoC peripherals outside the + * core, like watchdog timers, if the SoC wires it up + * correctly. Else VECRESET can reset just the core. + */ + mem_ap_write_atomic_u32(swjdp, NVIC_AIRCR, + AIRCR_VECTKEY | AIRCR_SYSRESETREQ); + LOG_DEBUG("Using Cortex-M3 SYSRESETREQ"); { - /* I do not know why this is necessary, but it fixes strange effects - * (step/resume cause a NMI after reset) on LM3S6918 -- Michael Schwingen */ + /* I do not know why this is necessary, but it + * fixes strange effects (step/resume cause NMI + * after reset) on LM3S6918 -- Michael Schwingen + */ uint32_t tmp; mem_ap_read_atomic_u32(swjdp, NVIC_AIRCR, &tmp); } -- 2.39.5