From 58aecca7b331c203aa79d05987d1e7691cd1617b Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" Date: Wed, 8 Jan 2014 11:22:01 -0500 Subject: [PATCH] Update URLs and names in amdm37x.cfg, no functional changes. * openocd.berlios.de -> openocd.sourceforge.net * Update link to AM/DM37x Technical Reference Manual (ver R) * "ICEpick" is properly spelled "ICEPick" according to TI Change-Id: Ie04458e82c97ef766ec03bd9b9f27edadf5d1cb2 Signed-off-by: Robert P. J. Day Reviewed-on: http://openocd.zylin.com/1856 Tested-by: jenkins Reviewed-by: Spencer Oliver --- tcl/target/amdm37x.cfg | 32 ++++++++++++++++---------------- 1 file changed, 16 insertions(+), 16 deletions(-) diff --git a/tcl/target/amdm37x.cfg b/tcl/target/amdm37x.cfg index ab2ccab1..6004070f 100644 --- a/tcl/target/amdm37x.cfg +++ b/tcl/target/amdm37x.cfg @@ -4,8 +4,8 @@ # Copyright (C) 2009 by David Brownell # Copyright (C) 2009 by Magnus Lundin # -# TI AM/DM37x -# http://www.ti.com/litv/pdf/sprugn4b +# TI AM/DM37x Technical Reference Manual (Version R) +# http://www.ti.com/lit/ug/sprugn4r/sprugn4r.pdf # # This script is based on the AM3517 initialization. It should be considered # preliminary since it needs more complete testing and only the basic @@ -28,11 +28,11 @@ if { [info exists CHIPTYPE] } { switch $CHIPTYPE { dm37x { - # Primary TAP: ICEpick-C (JTAG route controller) and boundary scan + # Primary TAP: ICEPick-C (JTAG route controller) and boundary scan set _JRC_TAPID "-expected-id 0x2b89102f -expected-id 0x1b89102f -expected-id 0x0b89102f" } am35x { - # Primary TAP: ICEpick-C (JTAG route controller) and boundary scan + # Primary TAP: ICEPick-C (JTAG route controller) and boundary scan set _JRC_TAPID "-expected-id 0x0b7ae02f" } default { @@ -50,20 +50,20 @@ adapter_khz 10 ############################################################################### # JTAG setup # The OpenOCD commands are described in the TAP Declaration section -# http://openocd.berlios.de/doc/html/TAP-Declaration.html +# http://openocd.sourceforge.net/doc/html/TAP-Declaration.html ############################################################################### -# The AM/DM37x has an ICEpick module in it like many of TI's other devices. More -# can be read about this module in sprugn4b under chapter 27: "Debug and +# The AM/DM37x has an ICEPick module in it like many of TI's other devices. More +# can be read about this module in sprugn4r in chapter 27: "Debug and # Emulation". The module is used to route the JTAG chain to the various # subsystems in the chip. source [find target/icepick.cfg] # The TAP order should be described from the TDO connection in OpenOCD to the # TDI pin. The OpenOCD FAQ describes this in more detail: -# http://openocd.berlios.de/doc/html/FAQ.html +# http://openocd.sourceforge.net/doc/html/FAQ.html -# From SPRUGN4B CH27 the available secondary TAPs are in this order from TDO: +# From SPRUGN4R CH27 the available secondary TAPs are in this order from TDO: # # Device | TAP number # ---------|------------ @@ -77,9 +77,9 @@ source [find target/icepick.cfg] ###### # Start of Chain Description -# The Secondary TAPs all have enable functions defined for use with the ICEpick +# The Secondary TAPs all have enable functions defined for use with the ICEPick # Only the DAP is enabled. The AM37xx does not have the Sequencer or DSP but -# the TAP numbers for ICEpick do not change. +# the TAP numbers for ICEPick do not change. # # TODO: A disable function should also be added. ###### @@ -93,26 +93,26 @@ jtag configure $_CHIPNAME.dap -event tap-enable \ # These taps are only present in the DM37x series. if { $CHIPTYPE == "dm37x" } { # Secondary TAP: Sequencer (ARM968) it is not in the chain by default - # The ICEpick can be used to enable it in the chain. + # The ICEPick can be used to enable it in the chain. jtag newtap $_CHIPNAME arm2 -irlen 4 -ircapture 0x1 -irmask 0x0f -disable jtag configure $_CHIPNAME.arm2 -event tap-enable \ "icepick_c_tapenable $_CHIPNAME.jrc 2" # Secondary TAP: C64x+ DSP - it is not in the chain by default (-disable) - # The ICEpick can be used to enable it in the chain. + # The ICEPick can be used to enable it in the chain. jtag newtap $_CHIPNAME dsp -irlen 38 -ircapture 0x25 -irmask 0x3f -disable jtag configure $_CHIPNAME.dsp -event tap-enable \ "icepick_c_tapenable $_CHIPNAME.jrc 1" } # Secondary TAP: D2D it is not in the chain by default (-disable) -# The ICEpick can be used to enable it in the chain. +# The ICEPick can be used to enable it in the chain. # This IRLEN is probably incorrect - not sure where the documentation is. jtag newtap $_CHIPNAME d2d -irlen 4 -ircapture 0x1 -irmask 0x0f -disable jtag configure $_CHIPNAME.d2d -event tap-enable \ "icepick_c_tapenable $_CHIPNAME.jrc 0" -# Primary TAP: ICEpick - it is closest to TDI so last in the chain +# Primary TAP: ICEPick - it is closest to TDI so last in the chain eval "jtag newtap $_CHIPNAME jrc -irlen 6 -ircapture 0x1 -irmask 0x3f $_JRC_TAPID" ###### @@ -136,7 +136,7 @@ jtag configure $_CHIPNAME.jrc -event setup "jtag tapenable $_CHIPNAME.dap" ############################################################################### # Target Setup: # This section is described in the OpenOCD documentation under CPU Configuration -# http://openocd.berlios.de/doc/html/CPU-Configuration.html +# http://openocd.sourceforge.net/doc/html/CPU-Configuration.html ############################################################################### # Create the CPU target to be used with GDB: Cortex-A8, using DAP -- 2.39.5