From 593243d3a2aed5a05ead6dc6369b1bd08010d8bc Mon Sep 17 00:00:00 2001 From: "Ye.Li" Date: Thu, 6 Nov 2014 16:29:02 +0800 Subject: [PATCH] imx: imx6q/dlsabreauto: Add PMIC Pfuze100 support Add the pfuze100 initialization in power_init_board for imx6q/dl sabreauto board. Signed-off-by: Ye.Li --- board/freescale/mx6qsabreauto/mx6qsabreauto.c | 15 +++++++++++++++ include/configs/mx6qsabreauto.h | 6 ++++++ 2 files changed, 21 insertions(+) diff --git a/board/freescale/mx6qsabreauto/mx6qsabreauto.c b/board/freescale/mx6qsabreauto/mx6qsabreauto.c index b36b70de05..59387ffaaa 100644 --- a/board/freescale/mx6qsabreauto/mx6qsabreauto.c +++ b/board/freescale/mx6qsabreauto/mx6qsabreauto.c @@ -28,6 +28,8 @@ #include #include #include +#include +#include "../common/pfuze.h" DECLARE_GLOBAL_DATA_PTR; @@ -57,6 +59,8 @@ DECLARE_GLOBAL_DATA_PTR; PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST) +#define I2C_PMIC 1 + int dram_init(void) { gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE); @@ -508,6 +512,17 @@ int board_spi_cs_gpio(unsigned bus, unsigned cs) } #endif +int power_init_board(void) +{ + struct pmic *p; + + p = pfuze_common_init(I2C_PMIC); + if (!p) + return -ENODEV; + + return 0; +} + #ifdef CONFIG_CMD_BMODE static const struct boot_mode board_boot_modes[] = { /* 4 bit bus width */ diff --git a/include/configs/mx6qsabreauto.h b/include/configs/mx6qsabreauto.h index 559937a712..51042ca72e 100644 --- a/include/configs/mx6qsabreauto.h +++ b/include/configs/mx6qsabreauto.h @@ -74,4 +74,10 @@ #define CONFIG_APBH_DMA_BURST #define CONFIG_APBH_DMA_BURST8 +/* PMIC */ +#define CONFIG_POWER +#define CONFIG_POWER_I2C +#define CONFIG_POWER_PFUZE100 +#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08 + #endif /* __MX6QSABREAUTO_CONFIG_H */ -- 2.39.5