From 5a6f0495db71ef1c05a912cd87e52e3d62e641a3 Mon Sep 17 00:00:00 2001 From: Diego Herranz Date: Thu, 3 Aug 2017 07:37:41 +0100 Subject: [PATCH] tcl/interface/ftdi: improve minimodule config - Tested on a real FT2232H MiniModule, so warning removed. - Every pin initially set to high impedance except TCK, TDI, TDO and TMS: Safest values given it's an evaluation board and the rest of pins might be connected to something else. - Reset is now initially de-asserted (it was asserted which is not recommended). - nRST pin choice is arbitrary so comment added (wondering if it should be an "echo"). - "-oe" option added to NRST signal so it can be set as high impedance (tri-stated). Change-Id: I967ab0c7bbccf72dbf6d6d78b3180b74e016e0d6 Signed-off-by: Diego Herranz Reviewed-on: http://openocd.zylin.com/4185 Tested-by: jenkins Reviewed-by: Spencer Oliver --- tcl/interface/ftdi/minimodule.cfg | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) diff --git a/tcl/interface/ftdi/minimodule.cfg b/tcl/interface/ftdi/minimodule.cfg index 57249dfc..7df096d9 100644 --- a/tcl/interface/ftdi/minimodule.cfg +++ b/tcl/interface/ftdi/minimodule.cfg @@ -4,14 +4,13 @@ # http://www.ftdichip.com/Support/Documents/DataSheets/Modules/DS_FT2232H_Mini_Module.pdf # -echo "WARNING!" -echo "This file was not tested with real interface, it is based on code in ft2232.c." -echo "Please report your experience with this file to openocd-devel mailing list," -echo "so it could be marked as working or fixed." - interface ftdi ftdi_device_desc "FT2232H MiniModule" ftdi_vid_pid 0x0403 0x6010 -ftdi_layout_init 0x0018 0x05fb -ftdi_layout_signal nSRST -data 0x0020 +# Every pin set as high impedance except TCK, TDI, TDO and TMS +ftdi_layout_init 0x0008 0x000b + +# nSRST defined on pin CN2-13 of the MiniModule (pin ADBUS5 [AD5] on the FT2232H chip) +# This choice is arbitrary. Use other GPIO pin if desired. +ftdi_layout_signal nSRST -data 0x0020 -oe 0x0020 -- 2.39.5