From 5b47271c18e107408b40198420ea484b44b927a9 Mon Sep 17 00:00:00 2001 From: Mateusz Kulikowski Date: Thu, 31 Mar 2016 23:12:29 +0200 Subject: [PATCH] drivers: spmi: Add support for Qualcomm SPMI bus driver Support SPMI arbiter on Qualcomm Snapdragon devices. Signed-off-by: Mateusz Kulikowski Reviewed-by: Simon Glass Tested-by: Simon Glass --- doc/device-tree-bindings/spmi/spmi-msm.txt | 26 +++ drivers/spmi/Kconfig | 7 +- drivers/spmi/Makefile | 1 + drivers/spmi/spmi-msm.c | 189 +++++++++++++++++++++ 4 files changed, 222 insertions(+), 1 deletion(-) create mode 100644 doc/device-tree-bindings/spmi/spmi-msm.txt create mode 100644 drivers/spmi/spmi-msm.c diff --git a/doc/device-tree-bindings/spmi/spmi-msm.txt b/doc/device-tree-bindings/spmi/spmi-msm.txt new file mode 100644 index 0000000000..ae47673b76 --- /dev/null +++ b/doc/device-tree-bindings/spmi/spmi-msm.txt @@ -0,0 +1,26 @@ +Qualcomm SPMI arbiter/bus driver + +This is bus driver for Qualcomm chips that use SPMI to communicate with PMICs. + +Required properties: +- compatible: "qcom,spmi-pmic-arb" +- reg: Register block adresses and sizes for various parts of device: + 1) PMIC arbiter channel mapping base (PMIC_ARB_REG_CHNLn) + 2) SPMI write command (master) registers (PMIC_ARB_CORE_SW_DEC_CHANNELS) + 3) SPMI read command (observer) registers (PMIC_ARB_CORE_REGISTERS_OBS) + +Optional properties (if not set by parent): +- #address-cells: 0x1 - childs slave ID address +- #size-cells: 0x1 + +All PMICs should be placed as a child nodes of bus arbiter. +Automatic detection of childs is currently not supported. + +Example: + +spmi@200f000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x200f800 0x200 0x2400000 0x400000 0x2c00000 0x400000>; + #address-cells = <0x1>; + #size-cells = <0x1>; +}; diff --git a/drivers/spmi/Kconfig b/drivers/spmi/Kconfig index c70d67582d..8d25b457a6 100644 --- a/drivers/spmi/Kconfig +++ b/drivers/spmi/Kconfig @@ -8,11 +8,16 @@ config SPMI SPMI (System Power Management Interface) bus is used to connect PMIC devices on various SoCs. +config SPMI_MSM + boolean "Support Qualcomm SPMI bus" + depends on SPMI + ---help--- + Support SPMI bus implementation found on Qualcomm Snapdragon SoCs. + config SPMI_SANDBOX boolean "Support for Sandbox SPMI bus" depends on SPMI ---help--- Demo SPMI bus implementation. Emulates part of PM8916 as single slave (0) on bus. It has 4 GPIO peripherals, pid 0xC0-0xC3. - endmenu diff --git a/drivers/spmi/Makefile b/drivers/spmi/Makefile index 4ca65a99d8..c0b122097c 100644 --- a/drivers/spmi/Makefile +++ b/drivers/spmi/Makefile @@ -5,4 +5,5 @@ # obj-$(CONFIG_SPMI) += spmi-uclass.o +obj-$(CONFIG_SPMI_MSM) += spmi-msm.o obj-$(CONFIG_SPMI_SANDBOX) += spmi-sandbox.o diff --git a/drivers/spmi/spmi-msm.c b/drivers/spmi/spmi-msm.c new file mode 100644 index 0000000000..0cef505e37 --- /dev/null +++ b/drivers/spmi/spmi-msm.c @@ -0,0 +1,189 @@ +/* + * Qualcomm SPMI bus driver + * + * (C) Copyright 2015 Mateusz Kulikowski + * + * Loosely based on Little Kernel driver + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#include +#include +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +#define ARB_CHANNEL_OFFSET(n) (0x4 * (n)) +#define SPMI_CH_OFFSET(chnl) ((chnl) * 0x8000) + +#define SPMI_REG_CMD0 0x0 +#define SPMI_REG_CONFIG 0x4 +#define SPMI_REG_STATUS 0x8 +#define SPMI_REG_WDATA 0x10 +#define SPMI_REG_RDATA 0x18 + +#define SPMI_CMD_OPCODE_SHIFT 27 +#define SPMI_CMD_SLAVE_ID_SHIFT 20 +#define SPMI_CMD_ADDR_SHIFT 12 +#define SPMI_CMD_ADDR_OFFSET_SHIFT 4 +#define SPMI_CMD_BYTE_CNT_SHIFT 0 + +#define SPMI_CMD_EXT_REG_WRITE_LONG 0x00 +#define SPMI_CMD_EXT_REG_READ_LONG 0x01 + +#define SPMI_STATUS_DONE 0x1 + +#define SPMI_MAX_CHANNELS 128 +#define SPMI_MAX_SLAVES 16 +#define SPMI_MAX_PERIPH 256 + +struct msm_spmi_priv { + phys_addr_t arb_chnl; /* ARB channel mapping base */ + phys_addr_t spmi_core; /* SPMI core */ + phys_addr_t spmi_obs; /* SPMI observer */ + /* SPMI channel map */ + uint8_t channel_map[SPMI_MAX_SLAVES][SPMI_MAX_PERIPH]; +}; + +static int msm_spmi_write(struct udevice *dev, int usid, int pid, int off, + uint8_t val) +{ + struct msm_spmi_priv *priv = dev_get_priv(dev); + unsigned channel; + uint32_t reg = 0; + + if (usid >= SPMI_MAX_SLAVES) + return -EIO; + if (pid >= SPMI_MAX_PERIPH) + return -EIO; + + channel = priv->channel_map[usid][pid]; + + /* Disable IRQ mode for the current channel*/ + writel(0x0, priv->spmi_core + SPMI_CH_OFFSET(channel) + + SPMI_REG_CONFIG); + + /* Write single byte */ + writel(val, priv->spmi_core + SPMI_CH_OFFSET(channel) + SPMI_REG_WDATA); + + /* Prepare write command */ + reg |= SPMI_CMD_EXT_REG_WRITE_LONG << SPMI_CMD_OPCODE_SHIFT; + reg |= (usid << SPMI_CMD_SLAVE_ID_SHIFT); + reg |= (pid << SPMI_CMD_ADDR_SHIFT); + reg |= (off << SPMI_CMD_ADDR_OFFSET_SHIFT); + reg |= 1; /* byte count */ + + /* Send write command */ + writel(reg, priv->spmi_core + SPMI_CH_OFFSET(channel) + SPMI_REG_CMD0); + + /* Wait till CMD DONE status */ + reg = 0; + while (!reg) { + reg = readl(priv->spmi_core + SPMI_CH_OFFSET(channel) + + SPMI_REG_STATUS); + } + + if (reg ^ SPMI_STATUS_DONE) { + printf("SPMI write failure.\n"); + return -EIO; + } + + return 0; +} + +static int msm_spmi_read(struct udevice *dev, int usid, int pid, int off) +{ + struct msm_spmi_priv *priv = dev_get_priv(dev); + unsigned channel; + uint32_t reg = 0; + + if (usid >= SPMI_MAX_SLAVES) + return -EIO; + if (pid >= SPMI_MAX_PERIPH) + return -EIO; + + channel = priv->channel_map[usid][pid]; + + /* Disable IRQ mode for the current channel*/ + writel(0x0, priv->spmi_obs + SPMI_CH_OFFSET(channel) + SPMI_REG_CONFIG); + + /* Prepare read command */ + reg |= SPMI_CMD_EXT_REG_READ_LONG << SPMI_CMD_OPCODE_SHIFT; + reg |= (usid << SPMI_CMD_SLAVE_ID_SHIFT); + reg |= (pid << SPMI_CMD_ADDR_SHIFT); + reg |= (off << SPMI_CMD_ADDR_OFFSET_SHIFT); + reg |= 1; /* byte count */ + + /* Request read */ + writel(reg, priv->spmi_obs + SPMI_CH_OFFSET(channel) + SPMI_REG_CMD0); + + /* Wait till CMD DONE status */ + reg = 0; + while (!reg) { + reg = readl(priv->spmi_obs + SPMI_CH_OFFSET(channel) + + SPMI_REG_STATUS); + } + + if (reg ^ SPMI_STATUS_DONE) { + printf("SPMI read failure.\n"); + return -EIO; + } + + /* Read the data */ + return readl(priv->spmi_obs + SPMI_CH_OFFSET(channel) + + SPMI_REG_RDATA) & 0xFF; +} + +static struct dm_spmi_ops msm_spmi_ops = { + .read = msm_spmi_read, + .write = msm_spmi_write, +}; + +static int msm_spmi_probe(struct udevice *dev) +{ + struct udevice *parent = dev->parent; + struct msm_spmi_priv *priv = dev_get_priv(dev); + int i; + + priv->arb_chnl = dev_get_addr(dev); + priv->spmi_core = fdtdec_get_addr_size_auto_parent(gd->fdt_blob, + parent->of_offset, + dev->of_offset, + "reg", 1, NULL); + priv->spmi_obs = fdtdec_get_addr_size_auto_parent(gd->fdt_blob, + parent->of_offset, + dev->of_offset, "reg", + 2, NULL); + if (priv->arb_chnl == FDT_ADDR_T_NONE || + priv->spmi_core == FDT_ADDR_T_NONE || + priv->spmi_obs == FDT_ADDR_T_NONE) + return -EINVAL; + + /* Scan peripherals connected to each SPMI channel */ + for (i = 0; i < SPMI_MAX_CHANNELS ; i++) { + uint32_t periph = readl(priv->arb_chnl + ARB_CHANNEL_OFFSET(i)); + uint8_t slave_id = (periph & 0xf0000) >> 16; + uint8_t pid = (periph & 0xff00) >> 8; + + priv->channel_map[slave_id][pid] = i; + } + return 0; +} + +static const struct udevice_id msm_spmi_ids[] = { + { .compatible = "qcom,spmi-pmic-arb" }, + { } +}; + +U_BOOT_DRIVER(msm_spmi) = { + .name = "msm_spmi", + .id = UCLASS_SPMI, + .of_match = msm_spmi_ids, + .ops = &msm_spmi_ops, + .probe = msm_spmi_probe, + .priv_auto_alloc_size = sizeof(struct msm_spmi_priv), +}; -- 2.39.5