From 5c18a1cf3e56e0177388258696be4a17a672e9d0 Mon Sep 17 00:00:00 2001 From: Przemyslaw Marczak Date: Tue, 10 Sep 2013 11:34:49 +0200 Subject: [PATCH] arm:goni:mmc: Add sd card detection and initialization. This change allow to use sd card on Goni the same like mmc 0. SD card is mmc dev 1, so it can be used like this: "fatls mmc 1:2". SD card is inited even if eMMC initialization fails. Signed-off-by: Przemyslaw Marczak Signed-off-by: Kyungmin Park CC: Minkyu Kang Acked-by: Jaehoon Chung Signed-off-by: Minkyu Kang --- board/samsung/goni/goni.c | 33 +++++++++++++++++++++++++++++++-- 1 file changed, 31 insertions(+), 2 deletions(-) diff --git a/board/samsung/goni/goni.c b/board/samsung/goni/goni.c index c05801d3fe..4ddff04f41 100644 --- a/board/samsung/goni/goni.c +++ b/board/samsung/goni/goni.c @@ -68,7 +68,7 @@ int checkboard(void) #ifdef CONFIG_GENERIC_MMC int board_mmc_init(bd_t *bis) { - int i; + int i, ret, ret_sd = 0; /* MASSMEMORY_EN: XMSMDATA7: GPJ2[7] output high */ s5p_gpio_direction_output(&s5pc110_gpio->j2, 7, 1); @@ -91,7 +91,36 @@ int board_mmc_init(bd_t *bis) s5p_gpio_set_drv(&s5pc110_gpio->g0, i, GPIO_DRV_4X); } - return s5p_mmc_init(0, 4); + ret = s5p_mmc_init(0, 4); + if (ret) + error("MMC: Failed to init MMC:0.\n"); + + /* + * SD card (T_FLASH) detect and init + * T_FLASH_DETECT: EINT28: GPH3[4] input mode + */ + s5p_gpio_cfg_pin(&s5pc110_gpio->h3, 4, GPIO_INPUT); + s5p_gpio_set_pull(&s5pc110_gpio->h3, 4, GPIO_PULL_UP); + + if (!s5p_gpio_get_value(&s5pc110_gpio->h3, 4)) { + for (i = 0; i < 7; i++) { + if (i == 2) + continue; + + /* GPG2[0:6] special function 2 */ + s5p_gpio_cfg_pin(&s5pc110_gpio->g2, i, 0x2); + /* GPG2[0:6] pull disable */ + s5p_gpio_set_pull(&s5pc110_gpio->g2, i, GPIO_PULL_NONE); + /* GPG2[0:6] drv 4x */ + s5p_gpio_set_drv(&s5pc110_gpio->g2, i, GPIO_DRV_4X); + } + + ret_sd = s5p_mmc_init(2, 4); + if (ret_sd) + error("MMC: Failed to init SD card (MMC:2).\n"); + } + + return ret & ret_sd; } #endif -- 2.39.5