From 5d9b7cdd2b2a4759740e35b23aade517b8b3a548 Mon Sep 17 00:00:00 2001 From: Stefan Mahr Date: Fri, 3 Jun 2011 11:10:34 +0200 Subject: [PATCH] mips: add nor flash write from memory block --- src/flash/nor/cfi.c | 240 ++++++++++++++++++++++++++++++++++++++++++++ src/target/mips32.h | 6 +- 2 files changed, 245 insertions(+), 1 deletion(-) diff --git a/src/flash/nor/cfi.c b/src/flash/nor/cfi.c index 954dbc21..3f1fbabe 100644 --- a/src/flash/nor/cfi.c +++ b/src/flash/nor/cfi.c @@ -31,6 +31,7 @@ #include #include #include +#include #include #include @@ -1278,6 +1279,12 @@ static int cfi_intel_write_block(struct flash_bank *bank, uint8_t *buffer, uint32_t target_code_size; int retval = ERROR_OK; + /* todo: if ( (!is_armv7m(target_to_armv7m(target)) && (!is_arm(target_to_arm(target)) ) */ + if (strncmp(target_type_name(target),"mips_m4k",8) == 0) + { + LOG_ERROR("Your target has no flash block write support yet."); + return ERROR_TARGET_RESOURCE_NOT_AVAILABLE; + } cfi_intel_clear_status_register(bank); @@ -1454,6 +1461,234 @@ cleanup: return retval; } +static int cfi_spansion_write_block_mips(struct flash_bank *bank, uint8_t *buffer, + uint32_t address, uint32_t count) +{ + struct cfi_flash_bank *cfi_info = bank->driver_priv; + struct cfi_spansion_pri_ext *pri_ext = cfi_info->pri_ext; + struct target *target = bank->target; + struct reg_param reg_params[10]; + struct mips32_algorithm mips32_info; + struct working_area *source; + uint32_t buffer_size = 32768; + uint32_t status; + int retval = ERROR_OK; + + /* input parameters - */ + /* 4 A0 = source address */ + /* 5 A1 = destination address */ + /* 6 A2 = number of writes */ + /* 7 A3 = flash write command */ + /* 8 T0 = constant to mask DQ7 bits (also used for Dq5 with shift) */ + /* output parameters - */ + /* 9 T1 = 0x80 ok 0x00 bad */ + /* temp registers - */ + /* 10 T2 = value read from flash to test status */ + /* 11 T3 = holding register */ + /* unlock registers - */ + /* 12 T4 = unlock1_addr */ + /* 13 T5 = unlock1_cmd */ + /* 14 T6 = unlock2_addr */ + /* 15 T7 = unlock2_cmd */ + + static const uint32_t mips_word_16_code[] = { + /* start: */ + MIPS32_LHU(9,0,4), /* lhu $t1, ($a0) ; out = &saddr */ + MIPS32_ADDI(4,4,2), /* addi $a0, $a0, 2 ; saddr += 2 */ + MIPS32_SH(13,0,12), /* sh $t5, ($t4) ; *fl_unl_addr1 = fl_unl_cmd1 */ + MIPS32_SH(15,0,14), /* sh $t7, ($t6) ; *fl_unl_addr2 = fl_unl_cmd2 */ + MIPS32_SH(7,0,12), /* sh $a3, ($t4) ; *fl_unl_addr1 = fl_write_cmd */ + MIPS32_SH(9,0,5), /* sh $t1, ($a1) ; *daddr = out */ + MIPS32_NOP, /* nop */ + /* busy: */ + MIPS32_LHU(10,0,5), /* lhu $t2, ($a1) ; temp1 = *daddr */ + MIPS32_XOR(11,9,10), /* xor $t3, $a0, $t2 ; temp2 = out ^ temp1; */ + MIPS32_AND(11,8,11), /* and $t3, $t0, $t3 ; temp2 = temp2 & DQ7mask */ + MIPS32_BNE(11,8, 13), /* bne $t3, $t0, cont ; if (temp2 != DQ7mask) goto cont */ + MIPS32_NOP, /* nop */ + + MIPS32_SRL(10,8,2), /* srl $t2,$t0,2 ; temp1 = DQ7mask >> 2 */ + MIPS32_AND(11,10,11), /* and $t3, $t2, $t3 ; temp2 = temp2 & temp1 */ + MIPS32_BNE(11,10, NEG16(8)), /* bne $t3, $t2, busy ; if (temp2 != temp1) goto busy */ + MIPS32_NOP, /* nop */ + + MIPS32_LHU(10,0,5), /* lhu $t2, ($a1) ; temp1 = *daddr */ + MIPS32_XOR(11,9,10), /* xor $t3, $a0, $t2 ; temp2 = out ^ temp1; */ + MIPS32_AND(11,8,11), /* and $t3, $t0, $t3 ; temp2 = temp2 & DQ7mask */ + MIPS32_BNE(11,8, 4), /* bne $t3, $t0, cont ; if (temp2 != DQ7mask) goto cont */ + MIPS32_NOP, /* nop */ + + MIPS32_XOR(9,9,9), /* xor $t1, $t1, $t1 ; out = 0 */ + MIPS32_BEQ(9,0, 11), /* beq $t1, $zero, done ; if (out == 0) goto done */ + MIPS32_NOP, /* nop */ + /* cont: */ + MIPS32_ADDI(6,6,NEG16(1)), /* addi, $a2, $a2, -1 ; numwrites-- */ + MIPS32_BNE(6,0, 5), /* bne $a2, $zero, cont2 ; if (numwrite != 0) goto cont2 */ + MIPS32_NOP, /* nop */ + + MIPS32_LUI(9,0), /* lui $t1, 0 */ + MIPS32_ORI(9,9,0x80), /* ori $t1, $t1, 0x80 ; out = 0x80 */ + + MIPS32_B(4), /* b done ; goto done */ + MIPS32_NOP, /* nop */ + /* cont2: */ + MIPS32_ADDI(5,5,2), /* addi $a0, $a0, 2 ; daddr += 2 */ + MIPS32_B(NEG16(33)), /* b start ; goto start */ + MIPS32_NOP, /* nop */ + /* done: */ + /*MIPS32_B(NEG16(1)), */ /* b done ; goto done */ + MIPS32_SDBBP, /* sdbbp ; break(); */ + /*MIPS32_B(NEG16(33)), */ /* b start ; goto start */ + /* MIPS32_NOP, */ + }; + + mips32_info.common_magic = MIPS32_COMMON_MAGIC; + mips32_info.isa_mode = MIPS32_ISA_MIPS32; + + int target_code_size = 0; + const uint32_t *target_code_src = NULL; + + switch (bank->bus_width) + { + case 2 : + /* Check for DQ5 support */ + if( cfi_info->status_poll_mask & (1 << 5) ) + { + target_code_src = mips_word_16_code; + target_code_size = sizeof(mips_word_16_code); + } + else + { + LOG_ERROR("Need DQ5 support"); + return ERROR_TARGET_RESOURCE_NOT_AVAILABLE; + //target_code_src = mips_word_16_code_dq7only; + //target_code_size = sizeof(mips_word_16_code_dq7only); + } + break; + default: + LOG_ERROR("Unsupported bank buswidth %d, can't do block memory writes", bank->bus_width); + return ERROR_TARGET_RESOURCE_NOT_AVAILABLE; + } + + /* flash write code */ + if (!cfi_info->write_algorithm) + { + uint8_t *target_code; + + /* convert bus-width dependent algorithm code to correct endiannes */ + target_code = malloc(target_code_size); + if (target_code == NULL) + { + LOG_ERROR("Out of memory"); + return ERROR_FAIL; + } + cfi_fix_code_endian(target, target_code, target_code_src, target_code_size / 4); + + /* allocate working area */ + retval = target_alloc_working_area(target, target_code_size, + &cfi_info->write_algorithm); + if (retval != ERROR_OK) + { + free(target_code); + return retval; + } + + /* write algorithm code to working area */ + if ((retval = target_write_buffer(target, cfi_info->write_algorithm->address, + target_code_size, target_code)) != ERROR_OK) + { + free(target_code); + return retval; + } + + free(target_code); + } + /* the following code still assumes target code is fixed 24*4 bytes */ + + while (target_alloc_working_area_try(target, buffer_size, &source) != ERROR_OK) + { + buffer_size /= 2; + if (buffer_size <= 256) + { + /* if we already allocated the writing code, but failed to get a + * buffer, free the algorithm */ + if (cfi_info->write_algorithm) + target_free_working_area(target, cfi_info->write_algorithm); + + LOG_WARNING("not enough working area available, can't do block memory writes"); + return ERROR_TARGET_RESOURCE_NOT_AVAILABLE; + } + }; + + init_reg_param(®_params[0], "a0", 32, PARAM_OUT); + init_reg_param(®_params[1], "a1", 32, PARAM_OUT); + init_reg_param(®_params[2], "a2", 32, PARAM_OUT); + init_reg_param(®_params[3], "a3", 32, PARAM_OUT); + init_reg_param(®_params[4], "t0", 32, PARAM_OUT); + init_reg_param(®_params[5], "t1", 32, PARAM_IN); + init_reg_param(®_params[6], "t4", 32, PARAM_OUT); + init_reg_param(®_params[7], "t5", 32, PARAM_OUT); + init_reg_param(®_params[8], "t6", 32, PARAM_OUT); + init_reg_param(®_params[9], "t7", 32, PARAM_OUT); + + while (count > 0) + { + uint32_t thisrun_count = (count > buffer_size) ? buffer_size : count; + + retval = target_write_buffer(target, source->address, thisrun_count, buffer); + if (retval != ERROR_OK) + { + break; + } + + buf_set_u32(reg_params[0].value, 0, 32, source->address); + buf_set_u32(reg_params[1].value, 0, 32, address); + buf_set_u32(reg_params[2].value, 0, 32, thisrun_count / bank->bus_width); + buf_set_u32(reg_params[3].value, 0, 32, cfi_command_val(bank, 0xA0)); + buf_set_u32(reg_params[4].value, 0, 32, cfi_command_val(bank, 0x80)); + buf_set_u32(reg_params[6].value, 0, 32, flash_address(bank, 0, pri_ext->_unlock1)); + buf_set_u32(reg_params[7].value, 0, 32, 0xaaaaaaaa); + buf_set_u32(reg_params[8].value, 0, 32, flash_address(bank, 0, pri_ext->_unlock2)); + buf_set_u32(reg_params[9].value, 0, 32, 0x55555555); + + retval = target_run_algorithm(target, 0, NULL, 10, reg_params, + cfi_info->write_algorithm->address, + cfi_info->write_algorithm->address + ((target_code_size) - 4), + 10000, &mips32_info); + if (retval != ERROR_OK) + { + break; + } + + status = buf_get_u32(reg_params[5].value, 0, 32); + if (status != 0x80) + { + LOG_ERROR("flash write block failed status: 0x%" PRIx32 , status); + retval = ERROR_FLASH_OPERATION_FAILED; + break; + } + + buffer += thisrun_count; + address += thisrun_count; + count -= thisrun_count; + } + + target_free_all_working_areas(target); + + destroy_reg_param(®_params[0]); + destroy_reg_param(®_params[1]); + destroy_reg_param(®_params[2]); + destroy_reg_param(®_params[3]); + destroy_reg_param(®_params[4]); + destroy_reg_param(®_params[5]); + destroy_reg_param(®_params[6]); + destroy_reg_param(®_params[7]); + destroy_reg_param(®_params[8]); + destroy_reg_param(®_params[9]); + + return retval; +} + static int cfi_spansion_write_block(struct flash_bank *bank, uint8_t *buffer, uint32_t address, uint32_t count) { @@ -1637,6 +1872,11 @@ static int cfi_spansion_write_block(struct flash_bank *bank, uint8_t *buffer, 0xeafffffe /* b 8204 */ }; + if (strncmp(target_type_name(target),"mips_m4k",8) == 0) + { + return cfi_spansion_write_block_mips(bank,buffer,address,count); + } + if (is_armv7m(target_to_armv7m(target))) /* Cortex-M3 target */ { armv4_5_info.common_magic = ARMV7M_COMMON_MAGIC; diff --git a/src/target/mips32.h b/src/target/mips32.h index 0d544a40..4f0f0ef0 100644 --- a/src/target/mips32.h +++ b/src/target/mips32.h @@ -110,6 +110,8 @@ struct mips32_algorithm #define MIPS32_OP_SH 0x29 #define MIPS32_OP_SW 0x2B #define MIPS32_OP_ORI 0x0D +#define MIPS32_OP_XOR 0x26 +#define MIPS32_OP_SRL 0x03 #define MIPS32_COP0_MF 0x00 #define MIPS32_COP0_MT 0x04 @@ -135,10 +137,12 @@ struct mips32_algorithm #define MIPS32_MFHI(reg) MIPS32_R_INST(0, 0, 0, reg, 0, MIPS32_OP_MFHI) #define MIPS32_MTLO(reg) MIPS32_R_INST(0, reg, 0, 0, 0, MIPS32_OP_MTLO) #define MIPS32_MTHI(reg) MIPS32_R_INST(0, reg, 0, 0, 0, MIPS32_OP_MTHI) -#define MIPS32_ORI(src, tar, val) MIPS32_I_INST(MIPS32_OP_ORI, src, tar, val) +#define MIPS32_ORI(tar, src, val) MIPS32_I_INST(MIPS32_OP_ORI, src, tar, val) #define MIPS32_SB(reg, off, base) MIPS32_I_INST(MIPS32_OP_SB, base, reg, off) #define MIPS32_SH(reg, off, base) MIPS32_I_INST(MIPS32_OP_SH, base, reg, off) #define MIPS32_SW(reg, off, base) MIPS32_I_INST(MIPS32_OP_SW, base, reg, off) +#define MIPS32_XOR(reg, val1, val2) MIPS32_R_INST(0, val1, val2, reg, 0, MIPS32_OP_XOR) +#define MIPS32_SRL(reg, src, off) MIPS32_R_INST(0, 0, src, reg, off, MIPS32_OP_SRL) /* ejtag specific instructions */ #define MIPS32_DRET 0x4200001F -- 2.39.5