From 6705d81e90ed4466d6e4f445104826096da0c521 Mon Sep 17 00:00:00 2001 From: wdenk Date: Mon, 2 Aug 2004 23:22:59 +0000 Subject: [PATCH] * Patch by Andreas Engel, 12 Jul 2004: Replaced hardcoded PL011 clock frequency with config variable. Fixed wrong CONFIG_CMD_DFL doc. * Patch by Thomas Viehweger, 09 Jun 2004: make it possible to remove chpart when there is only one partition --- CHANGELOG | 7 ++++ README | 60 ++++++++++++++++++++++++++++------ common/cmd_jffs2.c | 7 ++-- drivers/serial_pl010.c | 7 ++-- drivers/serial_pl011.c | 24 ++++---------- include/configs/integratorap.h | 1 + include/configs/integratorcp.h | 2 ++ include/configs/versatile.h | 3 ++ 8 files changed, 75 insertions(+), 36 deletions(-) diff --git a/CHANGELOG b/CHANGELOG index 4470f8c3dd..7a9fc1fcde 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,13 @@ Changes since U-Boot 1.1.1: ====================================================================== +* Patch by Andreas Engel, 12 Jul 2004: + Replaced hardcoded PL011 clock frequency with config variable. + Fixed wrong CONFIG_CMD_DFL doc. + +* Patch by Thomas Viehweger, 09 Jun 2004: + make it possible to remove chpart when there is only one partition + * Add support for console over UDP (compatible to Ingo Molnar's netconsole patch under Linux) diff --git a/README b/README index 0d6eac95f3..570b668a8b 100644 --- a/README +++ b/README @@ -380,6 +380,27 @@ The following options need to be configured: expect it to be in bytes, others in MB. Define CONFIG_MEMSIZE_IN_BYTES to make it in bytes. +- Serial Ports: + CFG_PL010_SERIAL + + Define this if you want support for Amba PrimeCell PL010 UARTs. + + CFG_PL011_SERIAL + + Define this if you want support for Amba PrimeCell PL011 UARTs. + + CONFIG_PL011_CLOCK + + If you have Amba PrimeCell PL011 UARTs, set this variable to + the clock speed of the UARTs. + + CONFIG_PL01x_PORTS + + If you have Amba PrimeCell PL010 or PL011 UARTs on your board, + define this to a list of base addresses for each (supported) + port. See e.g. include/configs/versatile.h + + - Console Interface: Depending on board, define exactly one serial port (like CONFIG_8xx_CONS_SMC1, CONFIG_8xx_CONS_SMC2, @@ -541,22 +562,23 @@ The following options need to be configured: CFG_CMD_ASKENV * ask for env variable CFG_CMD_AUTOSCRIPT Autoscript Support CFG_CMD_BDI bdinfo - CFG_CMD_BEDBUG Include BedBug Debugger + CFG_CMD_BEDBUG * Include BedBug Debugger CFG_CMD_BMP * BMP support + CFG_CMD_BSP * Board specific commands CFG_CMD_BOOTD bootd - CFG_CMD_CACHE icache, dcache + CFG_CMD_CACHE * icache, dcache CFG_CMD_CONSOLE coninfo CFG_CMD_DATE * support for RTC, date/time... - CFG_CMD_DHCP DHCP support + CFG_CMD_DHCP * DHCP support CFG_CMD_DIAG * Diagnostics CFG_CMD_DOC * Disk-On-Chip Support - CFG_CMD_DTT Digital Therm and Thermostat + CFG_CMD_DTT * Digital Therm and Thermostat CFG_CMD_ECHO * echo arguments CFG_CMD_EEPROM * EEPROM read/write support - CFG_CMD_ELF bootelf, bootvx + CFG_CMD_ELF * bootelf, bootvx CFG_CMD_ENV saveenv CFG_CMD_FDC * Floppy Disk Support - CFG_CMD_FAT FAT partition support + CFG_CMD_FAT * FAT partition support CFG_CMD_FDOS * Dos diskette Support CFG_CMD_FLASH flinfo, erase, protect CFG_CMD_FPGA FPGA device initialization support @@ -567,7 +589,7 @@ The following options need to be configured: CFG_CMD_IMLS List all found images CFG_CMD_IMMAP * IMMR dump support CFG_CMD_IRQ * irqinfo - CFG_CMD_ITEST * Integer/string test of 2 values + CFG_CMD_ITEST Integer/string test of 2 values CFG_CMD_JFFS2 * JFFS2 Support CFG_CMD_KGDB * kgdb CFG_CMD_LOADB loadb @@ -575,8 +597,8 @@ The following options need to be configured: CFG_CMD_MEMORY md, mm, nm, mw, cp, cmp, crc, base, loop, loopw, mtest CFG_CMD_MISC Misc functions like sleep etc - CFG_CMD_MMC MMC memory mapped support - CFG_CMD_MII MII utility commands + CFG_CMD_MMC * MMC memory mapped support + CFG_CMD_MII * MII utility commands CFG_CMD_NAND * NAND support CFG_CMD_NET bootp, tftpboot, rarpboot CFG_CMD_PCI * pciinfo @@ -585,7 +607,7 @@ The following options need to be configured: CFG_CMD_PORTIO * Port I/O CFG_CMD_REGINFO * Register dump CFG_CMD_RUN run command in env variable - CFG_CMD_SAVES save S record dump + CFG_CMD_SAVES * save S record dump CFG_CMD_SCSI * SCSI Support CFG_CMD_SDRAM * print SDRAM configuration information CFG_CMD_SETGETDCR Support for DCR Register access (4xx only) @@ -783,6 +805,24 @@ The following options need to be configured: enabled with CFG_CMD_MMC. The MMC driver also works with the FAT fs. This is enabled with CFG_CMD_FAT. +- Journaling Flash filesystem support: + CONFIG_JFFS2_NAND, CONFIG_JFFS2_NAND_OFF, CONFIG_JFFS2_NAND_SIZE, + CONFIG_JFFS2_NAND_DEV + Define these for a default partition on a NAND device + + CFG_JFFS2_FIRST_SECTOR, + CFG_JFFS2_FIRST_BANK, CFG_JFFS2_NUM_BANKS + Define these for a default partition on a NOR device + + CFG_JFFS_CUSTOM_PART + Define this to create an own partition. You have to provide a + function struct part_info* jffs2_part_info(int part_num) + + If you define only one JFFS2 partition you may also want to + #define CFG_JFFS_SINGLE_PART 1 + to disable the command chpart. This is the default when you + have not defined a custom partition + - Keyboard Support: CONFIG_ISA_KEYBOARD diff --git a/common/cmd_jffs2.c b/common/cmd_jffs2.c index e49b74d615..f7a5f9ebfd 100644 --- a/common/cmd_jffs2.c +++ b/common/cmd_jffs2.c @@ -47,6 +47,8 @@ static int part_num=0; #ifndef CFG_JFFS_CUSTOM_PART +#define CFG_JFFS_SINGLE_PART 1 + static struct part_info part; #ifndef CONFIG_JFFS2_NAND @@ -80,9 +82,6 @@ jffs2_part_info(int part_num) flash_info[CFG_JFFS2_FIRST_BANK].start[0]; #endif - /* unused in current jffs2 loader */ - part.erasesize = 0; - /* Mark the struct as ready */ part.usr_priv=(void*)1; @@ -230,6 +229,7 @@ do_jffs2_fsinfo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) return 0; } +#ifndef CFG_JFFS_SINGLE_PART int do_jffs2_chpart(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { @@ -257,6 +257,7 @@ do_jffs2_chpart(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) return 0; } +#endif /* CFG_JFFS_SINGLE_PART */ /***************************************************/ diff --git a/drivers/serial_pl010.c b/drivers/serial_pl010.c index 7ff4b85c35..417b6aeda6 100644 --- a/drivers/serial_pl010.c +++ b/drivers/serial_pl010.c @@ -38,13 +38,10 @@ #define IO_READ(addr) (*(volatile unsigned int *)(addr)) /* Integrator AP has two UARTs, we use the first one, at 38400-8-N-1 */ -#define NUM_PORTS 2 #define CONSOLE_PORT CONFIG_CONS_INDEX #define baudRate CONFIG_BAUDRATE -static volatile unsigned char *const port[NUM_PORTS] = { - (void *) (CFG_SERIAL0), - (void *) (CFG_SERIAL1) -}; +static volatile unsigned char *const port[] = CONFIG_PL01x_PORTS; +#define NUM_PORTS (sizeof(port)/sizeof(port[0])) static void pl010_putc (int portnum, char c); diff --git a/drivers/serial_pl011.c b/drivers/serial_pl011.c index 0e132268c8..4d35fe5e9e 100644 --- a/drivers/serial_pl011.c +++ b/drivers/serial_pl011.c @@ -41,14 +41,11 @@ * IntegratorCP has two UARTs, use the first one, at 38400-8-N-1 * Versatile PB has four UARTs. */ -#define NUM_PORTS 2 + #define CONSOLE_PORT CONFIG_CONS_INDEX #define baudRate CONFIG_BAUDRATE -static volatile unsigned char *const port[NUM_PORTS] = { - (void *) (CFG_SERIAL0), - (void *) (CFG_SERIAL1) -}; - +static volatile unsigned char *const port[] = CONFIG_PL01x_PORTS; +#define NUM_PORTS (sizeof(port)/sizeof(port[0])) static void pl011_putc (int portnum, char c); static int pl011_getc (int portnum); @@ -73,20 +70,11 @@ int serial_init (void) ** IBRD = UART_CLK / (16 * BAUD_RATE) ** FBRD = ROUND((64 * MOD(UART_CLK,(16 * BAUD_RATE))) / (16 * BAUD_RATE)) */ -#ifdef CONFIG_VERSATILE temp = 16 * baudRate; - divider = 24000000 / temp; - remainder = 24000000 % temp; + divider = CONFIG_PL011_CLOCK / temp; + remainder = CONFIG_PL011_CLOCK % temp; temp = (8 * remainder) / baudRate; fraction = (temp >> 1) + (temp & 1); -#endif -#ifdef CONFIG_INTEGRATOR - temp = 16 * baudRate; - divider = 14745600 / temp; - remainder = 14745600 % temp; - temp = (8 * remainder) / baudRate; - fraction = (temp >> 1) + (temp & 1); -#endif IO_WRITE (port[CONSOLE_PORT] + UART_PL011_IBRD, divider); IO_WRITE (port[CONSOLE_PORT] + UART_PL011_FBRD, fraction); @@ -104,7 +92,7 @@ int serial_init (void) (UART_PL011_CR_UARTEN | UART_PL011_CR_TXE | UART_PL011_CR_RXE)); - return (0); + return 0; } void serial_putc (const char c) diff --git a/include/configs/integratorap.h b/include/configs/integratorap.h index 1f0792f820..2674b52bf5 100644 --- a/include/configs/integratorap.h +++ b/include/configs/integratorap.h @@ -60,6 +60,7 @@ #define CFG_PL010_SERIAL #define CONFIG_CONS_INDEX 0 #define CONFIG_BAUDRATE 38400 +#define CONFIG_PL01x_PORTS { (void *) (CFG_SERIAL0), (void *) (CFG_SERIAL1) } #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } #define CFG_SERIAL0 0x16000000 #define CFG_SERIAL1 0x17000000 diff --git a/include/configs/integratorcp.h b/include/configs/integratorcp.h index eb814e7d67..136974846c 100644 --- a/include/configs/integratorcp.h +++ b/include/configs/integratorcp.h @@ -66,6 +66,8 @@ * NS16550 Configuration */ #define CFG_PL011_SERIAL +#define CONFIG_PL011_CLOCK 14745600 +#define CONFIG_PL01x_PORTS { (void *)CFG_SERIAL0, (void *)CFG_SERIAL1 } #define CONFIG_CONS_INDEX 0 #define CONFIG_BAUDRATE 38400 #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } diff --git a/include/configs/versatile.h b/include/configs/versatile.h index 8df0e46a90..49d72518f5 100644 --- a/include/configs/versatile.h +++ b/include/configs/versatile.h @@ -87,7 +87,10 @@ * NS16550 Configuration */ #define CFG_PL011_SERIAL +#define CONFIG_PL011_CLOCK 24000000 +#define CONFIG_PL01x_PORTS { (void *)CFG_SERIAL0, (void *)CFG_SERIAL1 } #define CONFIG_CONS_INDEX 0 + #define CONFIG_BAUDRATE 38400 #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } #define CFG_SERIAL0 0x101F1000 -- 2.39.5