From 67801c061f2b1cdc597076bf79387f0cc9737a13 Mon Sep 17 00:00:00 2001 From: Spencer Oliver Date: Thu, 8 Nov 2012 16:09:33 +0000 Subject: [PATCH] docs: update docs to include info on TI ICDI Change-Id: I3009920f512f76901d187318ee50284db34ab6f7 Signed-off-by: Spencer Oliver Reviewed-on: http://openocd.zylin.com/924 Tested-by: jenkins --- doc/openocd.texi | 27 ++++++++++++++++++--------- 1 file changed, 18 insertions(+), 9 deletions(-) diff --git a/doc/openocd.texi b/doc/openocd.texi index f2b2ffe9..5d1ef4ad 100644 --- a/doc/openocd.texi +++ b/doc/openocd.texi @@ -456,6 +456,11 @@ The simplest solution is to get linux to ignore the ST-LINK using one of the fol @item add "options usb-storage quirks=483:3744:i" to /etc/modprobe.conf @end itemize +@section USB TI/Stellaris ICDI based +Texas Instruments has an adapter called @b{ICDI}. +It is not to be confused with the FTDI based adapters that were originally fitted to their +evaluation boards. This is the adapter fitted to the Stellaris LaunchPad. + @section USB Other @itemize @bullet @item @b{USBprog} @@ -2804,27 +2809,31 @@ which are not currently documented here. @end quotation @end deffn -@deffn {Interface Driver} {stlink} -ST Micro ST-LINK adapter. +@deffn {Interface Driver} {hla} +This is a driver that supports multiple High Level Adapters. +This type of adapter does not expose some of the lower level api's +that OpenOCD would normally use to access the target. + +Currently supported adapters include the ST STLINK and TI ICDI. -@deffn {Config Command} {stlink_device_desc} description +@deffn {Config Command} {hla_device_desc} description Currently Not Supported. @end deffn -@deffn {Config Command} {stlink_serial} serial +@deffn {Config Command} {hla_serial} serial Currently Not Supported. @end deffn -@deffn {Config Command} {stlink_layout} (@option{sg}|@option{usb}) -Specifies the stlink layout to use. +@deffn {Config Command} {hla_layout} (@option{stlink}|@option{icdi}) +Specifies the adapter layout to use. @end deffn -@deffn {Config Command} {stlink_vid_pid} vid pid -The vendor ID and product ID of the STLINK device. +@deffn {Config Command} {hla_vid_pid} vid pid +The vendor ID and product ID of the device. @end deffn @deffn {Config Command} {stlink_api} api_level -Manually sets the stlink api used, valid options are 1 or 2. +Manually sets the stlink api used, valid options are 1 or 2. (@b{STLINK Only}). @end deffn @end deffn -- 2.39.5