From 67ee3dd35e20953e9e271d01a4ba4c4b417ec961 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 21 Mar 2012 05:42:45 +0000 Subject: [PATCH] mx53: Make PLL2 to be the parent of UART clock Change the parent UART clock to be PLL2, so that U-boot can also boot a Freescale 2.6.35 kernel for mx53. FSL kernel and U-boot changed the UART parent from PLL3 to PLL2 to avoid conflicts with IPU clocks, so that the video resolution can be changed without affecting the UART clock. On a 2.6.35 kernel the serial console is messed up after IPU driver is loaded and this patch fixes this problem. Tested on a mx53loco board booting a FSL kernel and also a mainline kernel. Reported-by: Otavio Salvador Signed-off-by: Fabio Estevam Acked-by: Otavio Salvador --- arch/arm/cpu/armv7/mx5/lowlevel_init.S | 20 +++++++++++++++++--- 1 file changed, 17 insertions(+), 3 deletions(-) diff --git a/arch/arm/cpu/armv7/mx5/lowlevel_init.S b/arch/arm/cpu/armv7/mx5/lowlevel_init.S index 01f6d759b9..74ab753a4a 100644 --- a/arch/arm/cpu/armv7/mx5/lowlevel_init.S +++ b/arch/arm/cpu/armv7/mx5/lowlevel_init.S @@ -284,10 +284,24 @@ ldr r1, =0x00C30321 str r1, [r0, #CLKCTL_CSCDR1] #elif defined(CONFIG_MX53) + /* Switch peripheral to PLL2 */ + ldr r0, =CCM_BASE_ADDR + ldr r1, =0x00808145 + orr r1, r1, #(2 << 10) + orr r1, r1, #(0 << 16) + orr r1, r1, #(1 << 19) + str r1, [r0, #CLKCTL_CBCDR] + + ldr r1, =0x00016154 + str r1, [r0, #CLKCTL_CBCMR] + /* Change uart clk parent to pll2*/ + ldr r1, [r0, #CLKCTL_CSCMR1] + and r1, r1, #0xfcffffff + orr r1, r1, #0x01000000 + str r1, [r0, #CLKCTL_CSCMR1] ldr r1, [r0, #CLKCTL_CSCDR1] - orr r1, r1, #0x3f - eor r1, r1, #0x3f - orr r1, r1, #0x21 + and r1, r1, #0xffffffc0 + orr r1, r1, #0x0a str r1, [r0, #CLKCTL_CSCDR1] #endif /* make sure divider effective */ -- 2.39.5