From 695c6c09603547edcfc78f18c1efd23c7ccb10dd Mon Sep 17 00:00:00 2001 From: zwelch Date: Sun, 7 Jun 2009 23:35:29 +0000 Subject: [PATCH] David Brownell : Let disabled targets be ignored during normal operation: - In target_examine(), ignore disabled TAPs - Reset handling must not poke at them either: * fail $target_name arp_* operations on disabled TAPs * in startup.tcl, don't even issue the arp_* wait ops ZW: removed superfluous braces from the patch to target.c. git-svn-id: svn://svn.berlios.de/openocd/trunk@2100 b42882b7-edfa-0310-969c-e2dbd0fdcd60 --- src/helper/startup.tcl | 28 +++++++++++++++++++++++----- src/target/target.c | 22 +++++++++++++++++++--- 2 files changed, 42 insertions(+), 8 deletions(-) diff --git a/src/helper/startup.tcl b/src/helper/startup.tcl index a6b50aa3..228caeda 100644 --- a/src/helper/startup.tcl +++ b/src/helper/startup.tcl @@ -164,6 +164,11 @@ proc ocd_process_reset { MODE } { return -error "Invalid mode: $MODE, must be one of: halt, init, or run"; } + # Target event handlers *might* change which TAPs are enabled + # or disabled, so we fire all of them. But don't issue any + # of the "arp_*" commands, which may issue JTAG transactions, + # unless we know the underlying TAP is active. + foreach t [ target names ] { # New event script. $t invoke-event reset-start @@ -172,16 +177,20 @@ proc ocd_process_reset { MODE } { # Init the tap controller. jtag arp_init-reset - # Examine all targets. + # Examine all targets on enabled taps. foreach t [ target names ] { - $t arp_examine + if {[jtag tapisenabled [$t cget -chain-position]]} { + $t arp_examine + } } # Let the C code know we are asserting reset. foreach t [ target names ] { $t invoke-event reset-assert-pre # C code needs to know if we expect to 'halt' - $t arp_reset assert $halt + if {[jtag tapisenabled [$t cget -chain-position]]} { + $t arp_reset assert $halt + } $t invoke-event reset-assert-post } @@ -189,14 +198,19 @@ proc ocd_process_reset { MODE } { foreach t [ target names ] { $t invoke-event reset-deassert-pre # Again, de-assert code needs to know.. - $t arp_reset deassert $halt + if {[jtag tapisenabled [$t cget -chain-position]]} { + $t arp_reset deassert $halt + } $t invoke-event reset-deassert-post } # Pass 1 - Now try to halt. if { $halt } { foreach t [target names] { - + if {[jtag tapisenabled [$t cget -chain-position]] == 0} { + continue + } + # Wait upto 1 second for target to halt. Why 1sec? Cause # the JTAG tap reset signal might be hooked to a slow # resistor/capacitor circuit - and it might take a while @@ -217,6 +231,10 @@ proc ocd_process_reset { MODE } { #Pass 2 - if needed "init" if { 0 == [string compare init $MODE] } { foreach t [target names] { + if {[jtag tapisenabled [$t cget -chain-position]] == 0} { + continue + } + set err [catch "$t arp_waitstate halted 5000"] # Did it halt? if { $err == 0 } { diff --git a/src/target/target.c b/src/target/target.c index d6726492..1c32fdbb 100644 --- a/src/target/target.c +++ b/src/target/target.c @@ -479,12 +479,14 @@ int target_examine_one(struct target_s *target) int target_examine(void) { int retval = ERROR_OK; - target_t *target = all_targets; - while (target) + target_t *target; + + for (target = all_targets; target; target = target->next) { + if (!target->tap->enabled) + continue; if ((retval = target_examine_one(target)) != ERROR_OK) return retval; - target = target->next; } return retval; } @@ -3734,6 +3736,8 @@ static int tcl_target_func( Jim_Interp *interp, int argc, Jim_Obj *const *argv ) Jim_WrongNumArgs( goi.interp, 2, argv, "[no parameters]"); return JIM_ERR; } + if (!target->tap->enabled) + goto err_tap_disabled; e = target->type->examine( target ); if( e != ERROR_OK ){ Jim_SetResult_sprintf( interp, "examine-fails: %d", e ); @@ -3745,6 +3749,8 @@ static int tcl_target_func( Jim_Interp *interp, int argc, Jim_Obj *const *argv ) Jim_WrongNumArgs( goi.interp, 2, argv, "[no parameters]"); return JIM_ERR; } + if (!target->tap->enabled) + goto err_tap_disabled; if( !(target_was_examined(target)) ){ e = ERROR_TARGET_NOT_EXAMINED; } else { @@ -3772,6 +3778,8 @@ static int tcl_target_func( Jim_Interp *interp, int argc, Jim_Obj *const *argv ) if( e != JIM_OK ){ return e; } + if (!target->tap->enabled) + goto err_tap_disabled; /* determine if we should halt or not. */ target->reset_halt = !!a; /* When this happens - all workareas are invalid. */ @@ -3789,6 +3797,8 @@ static int tcl_target_func( Jim_Interp *interp, int argc, Jim_Obj *const *argv ) Jim_WrongNumArgs( goi.interp, 0, argv, "halt [no parameters]"); return JIM_ERR; } + if (!target->tap->enabled) + goto err_tap_disabled; target->type->halt( target ); return JIM_OK; case TS_CMD_WAITSTATE: @@ -3806,6 +3816,8 @@ static int tcl_target_func( Jim_Interp *interp, int argc, Jim_Obj *const *argv ) if( e != JIM_OK ){ return e; } + if (!target->tap->enabled) + goto err_tap_disabled; e = target_wait_state( target, n->value, a ); if( e != ERROR_OK ){ Jim_SetResult_sprintf( goi.interp, @@ -3861,6 +3873,10 @@ static int tcl_target_func( Jim_Interp *interp, int argc, Jim_Obj *const *argv ) return JIM_OK; } return JIM_ERR; + +err_tap_disabled: + Jim_SetResult_sprintf(interp, "[TAP is disabled]"); + return JIM_ERR; } static int target_create( Jim_GetOptInfo *goi ) -- 2.39.5