From 6b9d19d3675a82ccc501fd7cba036c5b04d04590 Mon Sep 17 00:00:00 2001 From: Tobias Diedrich Date: Mon, 1 Aug 2016 15:57:20 +0200 Subject: [PATCH] flash: Add support for Atheros (ath79) SPI interface Supported SoCs: AR71xx, AR724x, AR91xx, AR93xx, QCA9558 Extended and revised version of my original patch submitted by Dmytro here: http://openocd.zylin.com/#/c/3390 This driver is using pure SPI mode, so the flash base address is not used except some flash commands (e.g. "flash program") need it to distinguish the banks. Example config with all 3 chip selects: flash bank flash0 ath79 0 0 0 0 $_TARGETNAME cs0 flash bank flash1 ath79 0x10000000 0 0 0 $_TARGETNAME cs1 flash bank flash2 ath79 0x20000000 0 0 0 $_TARGETNAME cs2 Example usage: > flash probe flash0 Found flash device 'win w25q128fv' (ID 0x001840ef) flash 'ath79' found at 0x00000000 > flash probe flash1 No SPI flash found > flash probe flash2 No SPI flash found > flash banks > flash read_bank flash0 /tmp/test.bin 0x00000000 0x1000 reading 4096 bytes from flash @0x00000000 wrote 4096 bytes to file /tmp/test.bin from flash bank 0 at offset 0x00000000 in 28.688066s (0.139 KiB/s) Change-Id: I5feb697722c07e83a9c1b361a9db7b06bc699aa8 Signed-off-by: Tobias Diedrich Reviewed-on: http://openocd.zylin.com/3612 Tested-by: jenkins Reviewed-by: Dmytro Reviewed-by: Paul Fertser --- README | 2 +- doc/openocd.texi | 39 ++ src/flash/nor/Makefile.am | 1 + src/flash/nor/ath79.c | 903 ++++++++++++++++++++++++++++++++++++++ src/flash/nor/drivers.c | 2 + src/target/mips32_pracc.h | 2 + 6 files changed, 948 insertions(+), 1 deletion(-) create mode 100644 src/flash/nor/ath79.c diff --git a/README b/README index 581082e6..f2d704b4 100644 --- a/README +++ b/README @@ -123,7 +123,7 @@ XScale, Intel Quark. Flash drivers ------------- -ADUC702x, AT91SAM, AVR, CFI, DSP5680xx, EFM32, EM357, FM3, FM4, Kinetis, +ADUC702x, AT91SAM, ATH79, AVR, CFI, DSP5680xx, EFM32, EM357, FM3, FM4, Kinetis, LPC8xx/LPC1xxx/LPC2xxx/LPC541xx, LPC2900, LPCSPIFI, Marvell QSPI, Milandr, NIIET, NuMicro, PIC32mx, PSoC4, SiM3x, Stellaris, STM32, STMSMI, STR7x, STR9x, nRF51; NAND controllers of AT91SAM9, LPC3180, LPC32xx, diff --git a/doc/openocd.texi b/doc/openocd.texi index 373eacbb..59d2d4f1 100644 --- a/doc/openocd.texi +++ b/doc/openocd.texi @@ -4999,6 +4999,45 @@ flash bank $_FLASHNAME mrvlqspi 0x0 0 0 0 $_TARGETNAME 0x46010000 @end deffn +@deffn {Flash Driver} ath79 +@cindex Atheros ath79 SPI driver +@cindex ath79 +Members of ATH79 SoC family from Atheros include a SPI interface with 3 +chip selects. +On reset a SPI flash connected to the first chip select (CS0) is made +directly read-accessible in the CPU address space (up to 16MBytes) +and is usually used to store the bootloader and operating system. +Normal OpenOCD commands like @command{mdw} can be used to display +the flash content while it is in memory-mapped mode (only the first +4MBytes are accessible without additional configuration on reset). + +The setup command only requires the @var{base} parameter in order +to identify the memory bank. The actual value for the base address +is not otherwise used by the driver. However the mapping is passed +to gdb. Thus for the memory mapped flash (chipselect CS0) the base +address should be the actual memory mapped base address. For unmapped +chipselects (CS1 and CS2) care should be taken to use a base address +that does not overlap with real memory regions. +Additional information, like flash size, are detected automatically. +An optional additional parameter sets the chipselect for the bank, +with the default CS0. +CS1 and CS2 require additional GPIO setup before they can be used +since the alternate function must be enabled on the GPIO pin +CS1/CS2 is routed to on the given SoC. + +@example +flash bank $_FLASHNAME ath79 0 0 0 0 $_TARGETNAME + +# When using multiple chipselects the base should be different for each, +# otherwise the write_image command is not able to distinguish the +# banks. +flash bank flash0 ath79 0x00000000 0 0 0 $_TARGETNAME cs0 +flash bank flash1 ath79 0x10000000 0 0 0 $_TARGETNAME cs1 +flash bank flash2 ath79 0x20000000 0 0 0 $_TARGETNAME cs2 +@end example + +@end deffn + @subsection Internal Flash (Microcontrollers) @deffn {Flash Driver} aduc702x diff --git a/src/flash/nor/Makefile.am b/src/flash/nor/Makefile.am index 727e4f2f..5a992fee 100644 --- a/src/flash/nor/Makefile.am +++ b/src/flash/nor/Makefile.am @@ -15,6 +15,7 @@ NOR_DRIVERS = \ %D%/at91samd.c \ %D%/at91sam3.c \ %D%/at91sam7.c \ + %D%/ath79.c \ %D%/atsamv.c \ %D%/avrf.c \ %D%/cfi.c \ diff --git a/src/flash/nor/ath79.c b/src/flash/nor/ath79.c new file mode 100644 index 00000000..05430850 --- /dev/null +++ b/src/flash/nor/ath79.c @@ -0,0 +1,903 @@ +/*************************************************************************** + * Copyright (C) 2015 by Tobias Diedrich * + * * + * * + * based on the stmsmi code written by Antonio Borneo * + * * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this program; if not, write to the * + * Free Software Foundation, Inc. * + * * + ***************************************************************************/ +/* + * Driver for the Atheros AR7xxx/AR9xxx SPI flash interface. + * + * Since no SPI mode register is present, presumably only + * SPI "mode 3" (CPOL=1 and CPHA=1) is supported. + * + * The SPI interface supports up to 3 chip selects, however the SPI flash + * used for booting the system must be connected to CS0. + * + * On boot, the first 4MiB of flash space are memory-mapped into the + * area bf000000 - bfffffff (4 copies), so the MIPS bootstrap + * vector bfc00000 is mapped to the beginning of the flash. + * + * By writing a 1 to the REMAP_DISABLE bit in the SPI_CONTROL register, + * the full area of 16MiB is mapped. + * + * By writing a 0 to the SPI_FUNCTION_SELECT register (write-only dword + * register @bf000000), memory mapping is disabled and the SPI registers + * are exposed to the CPU instead: + * bf000000 SPI_FUNCTION_SELECT + * bf000004 SPI_CONTROL + * bf000008 SPI_IO_CONTROL + * bf00000c SPI_READ_DATA + * + * When not memory-mapped, the SPI interface is essentially bitbanged + * using SPI_CONTROL and SPI_IO_CONTROL with the only hardware-assistance + * being the 32bit read-only shift-register SPI_READ_DATA. + */ + +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + +#include "imp.h" +#include "spi.h" +#include +#include +#include +#include +#include +#include + +#define BITS_PER_BYTE 8 + +#define ATH79_REG_FS 0 +#define ATH79_REG_CLOCK 4 +#define ATH79_REG_WRITE 8 +#define ATH79_REG_DATA 12 + +#define ATH79_SPI_CS_ALLHI 0x70000 +#define ATH79_SPI_CS0_HI 0x10000 +#define ATH79_SPI_CS1_HI 0x20000 +#define ATH79_SPI_CS2_HI 0x40000 +#define ATH79_SPI_CE_HI 0x00100 +#define ATH79_SPI_DO_HI 0x00001 + +#define ATH79_XFER_FINAL 0x00000001 +#define ATH79_XFER_PARTIAL 0x00000000 + +/* Timeout in ms */ +#define ATH79_MAX_TIMEOUT (3000) + +struct ath79_spi_ctx { + uint8_t *page_buf; + int pre_deselect; + int post_deselect; +}; + +struct ath79_flash_bank { + int probed; + int chipselect; + uint32_t io_base; + const struct flash_device *dev; + struct ath79_spi_ctx spi; +}; + +struct ath79_target { + char *name; + uint32_t tap_idcode; + uint32_t io_base; +}; + +static const struct ath79_target target_devices[] = { + /* name, tap_idcode, io_base */ + { "ATH79", 0x00000001, 0xbf000000 }, + { NULL, 0, 0 } +}; + +static const uint32_t ath79_chipselects[] = { + (~ATH79_SPI_CS0_HI & ATH79_SPI_CS_ALLHI), + (~ATH79_SPI_CS1_HI & ATH79_SPI_CS_ALLHI), + (~ATH79_SPI_CS2_HI & ATH79_SPI_CS_ALLHI), +}; + +static void ath79_pracc_addn(struct pracc_queue_info *ctx, + const uint32_t *instr, + int n) +{ + for (int i = 0; i < n; i++) + pracc_add(ctx, 0, instr[i]); +} + +static int ath79_spi_bitbang_codegen(struct ath79_flash_bank *ath79_info, + struct pracc_queue_info *ctx, + uint8_t *data, int len, + int partial_xfer) +{ + uint32_t cs_high = ATH79_SPI_CS_ALLHI; + uint32_t cs_low = ath79_chipselects[ath79_info->chipselect]; + uint32_t clock_high = cs_low | ATH79_SPI_CE_HI; + uint32_t clock_low = cs_low; + uint32_t pracc_out = 0; + uint32_t io_base = ath79_info->io_base; + + const uint32_t preamble1[] = { + /* $15 = MIPS32_PRACC_BASE_ADDR */ + MIPS32_LUI(15, PRACC_UPPER_BASE_ADDR), + /* $1 = io_base */ + MIPS32_LUI(1, UPPER16(io_base)), + }; + ath79_pracc_addn(ctx, preamble1, ARRAY_SIZE(preamble1)); + if (ath79_info->spi.pre_deselect) { + /* Clear deselect flag so we don't deselect again if + * this is a partial xfer. + */ + ath79_info->spi.pre_deselect = 0; + const uint32_t pre_deselect[] = { + /* [$1 + FS] = 1 (enable flash io register access) */ + MIPS32_LUI(2, UPPER16(1)), + MIPS32_ORI(2, 2, LOWER16(1)), + MIPS32_SW(2, ATH79_REG_FS, 1), + /* deselect flash just in case */ + /* $2 = SPI_CS_DIS */ + MIPS32_LUI(2, UPPER16(cs_high)), + MIPS32_ORI(2, 2, LOWER16(cs_high)), + /* [$1 + WRITE] = $2 */ + MIPS32_SW(2, ATH79_REG_WRITE, 1), + }; + ath79_pracc_addn(ctx, pre_deselect, ARRAY_SIZE(pre_deselect)); + } + const uint32_t preamble2[] = { + /* t0 = CLOCK_LOW + 0-bit */ + MIPS32_LUI(8, UPPER16((clock_low + 0))), + MIPS32_ORI(8, 8, LOWER16((clock_low + 0))), + /* t1 = CLOCK_LOW + 1-bit */ + MIPS32_LUI(9, UPPER16((clock_low + 1))), + MIPS32_ORI(9, 9, LOWER16((clock_low + 1))), + /* t2 = CLOCK_HIGH + 0-bit */ + MIPS32_LUI(10, UPPER16((clock_high + 0))), + MIPS32_ORI(10, 10, LOWER16((clock_high + 0))), + /* t3 = CLOCK_HIGH + 1-bit */ + MIPS32_LUI(11, UPPER16((clock_high + 1))), + MIPS32_ORI(11, 11, LOWER16((clock_high + 1))), + }; + ath79_pracc_addn(ctx, preamble2, ARRAY_SIZE(preamble2)); + + for (int i = 0; i < len; i++) { + uint8_t x = data[i]; + + /* Generate bitbang code for one byte, highest bit first .*/ + for (int j = BITS_PER_BYTE - 1; j >= 0; j--) { + int bit = ((x >> j) & 1); + + if (bit) { + /* [$1 + WRITE] = t1 */ + pracc_add(ctx, 0, + MIPS32_SW(9, ATH79_REG_WRITE, 1)); + /* [$1 + WRITE] = t3 */ + pracc_add(ctx, 0, + MIPS32_SW(11, ATH79_REG_WRITE, 1)); + } else { + /* [$1 + WRITE] = t0 */ + pracc_add(ctx, 0, + MIPS32_SW(8, ATH79_REG_WRITE, 1)); + /* [$1 + WRITE] = t2 */ + pracc_add(ctx, 0, + MIPS32_SW(10, ATH79_REG_WRITE, 1)); + } + } + if (i % 4 == 3) { + /* $3 = [$1 + DATA] */ + pracc_add(ctx, 0, MIPS32_LW(3, ATH79_REG_DATA, 1)); + /* [OUTi] = $3 */ + pracc_add(ctx, MIPS32_PRACC_PARAM_OUT + pracc_out, + MIPS32_SW(3, PRACC_OUT_OFFSET + + pracc_out, 15)); + pracc_out += 4; + } + } + if (len & 3) { /* not a multiple of 4 bytes */ + /* $3 = [$1 + DATA] */ + pracc_add(ctx, 0, MIPS32_LW(3, ATH79_REG_DATA, 1)); + /* [OUTi] = $3 */ + pracc_add(ctx, MIPS32_PRACC_PARAM_OUT + pracc_out, + MIPS32_SW(3, PRACC_OUT_OFFSET + pracc_out, 15)); + pracc_out += 4; + } + + if (ath79_info->spi.post_deselect && !partial_xfer) { + const uint32_t post_deselect[] = { + /* $2 = SPI_CS_DIS */ + MIPS32_LUI(2, UPPER16(cs_high)), + MIPS32_ORI(2, 2, LOWER16(cs_high)), + /* [$1 + WRITE] = $2 */ + MIPS32_SW(2, ATH79_REG_WRITE, 1), + + /* [$1 + FS] = 0 (disable flash io register access) */ + MIPS32_XORI(2, 2, 0), + MIPS32_SW(2, ATH79_REG_FS, 1), + }; + ath79_pracc_addn(ctx, post_deselect, ARRAY_SIZE(post_deselect)); + } + + /* common pracc epilogue */ + /* jump to start */ + pracc_add(ctx, 0, MIPS32_B(NEG16(ctx->code_count + 1))); + /* restore $15 from DeSave */ + pracc_add(ctx, 0, MIPS32_MFC0(15, 31, 0)); + + return pracc_out / 4; +} + +static int ath79_spi_bitbang_chunk(struct flash_bank *bank, + uint8_t *data, int len, int *transferred) +{ + struct target *target = bank->target; + struct ath79_flash_bank *ath79_info = bank->driver_priv; + struct mips32_common *mips32 = target_to_mips32(target); + struct mips_ejtag *ejtag_info = &mips32->ejtag_info; + int pracc_words; + + /* + * These constants must match the worst case in the above code + * generator function ath79_spi_bitbang_codegen. + */ + const int pracc_pre_post = 26; + const int pracc_loop_byte = 8 * 2 + 2; + + struct pracc_queue_info ctx = { + .max_code = PRACC_MAX_INSTRUCTIONS + }; + int max_len = (ctx.max_code - pracc_pre_post) / pracc_loop_byte; + int to_xfer = len > max_len ? max_len : len; + int partial_xfer = len != to_xfer; + int padded_len = (to_xfer + 3) & ~3; + uint32_t *out = malloc(padded_len); + + if (!out) { + LOG_ERROR("not enough memory"); + return ERROR_FAIL; + } + + *transferred = 0; + pracc_queue_init(&ctx); + if (ctx.retval != ERROR_OK) + goto exit; + + LOG_DEBUG("ath79_spi_bitbang_bytes(%p, %08x, %p, %d)", + target, ath79_info->io_base, data, len); + + LOG_DEBUG("max code %d => max len %d. to_xfer %d", + ctx.max_code, max_len, to_xfer); + + pracc_words = ath79_spi_bitbang_codegen( + ath79_info, &ctx, data, to_xfer, partial_xfer); + + LOG_DEBUG("Assembled %d instructions, %d stores", + ctx.code_count, ctx.store_count); + + ctx.retval = mips32_pracc_queue_exec(ejtag_info, &ctx, out); + if (ctx.retval != ERROR_OK) + goto exit; + + if (to_xfer & 3) { /* Not a multiple of 4 bytes. */ + /* + * Need to realign last word since we didn't shift the + * full 32 bits. + */ + int missed_bytes = 4 - (to_xfer & 3); + + out[pracc_words - 1] <<= BITS_PER_BYTE * missed_bytes; + } + + /* + * pracc reads return uint32_t in host endianness, convert to + * target endianness. + * Since we know the ATH79 target is big endian and the SPI + * shift register has the bytes in highest to lowest bit order, + * this will ensure correct memory byte order regardless of host + * endianness. + */ + target_buffer_set_u32_array(target, (uint8_t *)out, pracc_words, out); + + if (LOG_LEVEL_IS(LOG_LVL_DEBUG)) { + for (int i = 0; i < to_xfer; i++) { + LOG_DEBUG("bitbang %02x => %02x", + data[i], ((uint8_t *)out)[i]); + } + } + memcpy(data, out, to_xfer); + *transferred = to_xfer; + +exit: + pracc_queue_free(&ctx); + free(out); + return ctx.retval; +} + +static void ath79_spi_bitbang_prepare(struct flash_bank *bank) +{ + struct ath79_flash_bank *ath79_info = bank->driver_priv; + + ath79_info->spi.pre_deselect = 1; +} + +static int ath79_spi_bitbang_bytes(struct flash_bank *bank, + uint8_t *data, int len, uint32_t flags) +{ + struct ath79_flash_bank *ath79_info = bank->driver_priv; + int retval; + int transferred; + + ath79_info->spi.post_deselect = !!(flags & ATH79_XFER_FINAL); + + do { + transferred = 0; + retval = ath79_spi_bitbang_chunk( + bank, data, len, &transferred); + if (retval != ERROR_OK) + return retval; + + data += transferred; + len -= transferred; + } while (len > 0); + + return ERROR_OK; +} + +FLASH_BANK_COMMAND_HANDLER(ath79_flash_bank_command) +{ + struct ath79_flash_bank *ath79_info; + int chipselect = 0; + + LOG_DEBUG("%s", __func__); + + if (CMD_ARGC < 6 || CMD_ARGC > 7) + return ERROR_COMMAND_SYNTAX_ERROR; + + if (CMD_ARGC == 7) { + if (strcmp(CMD_ARGV[6], "cs0") == 0) + chipselect = 0; /* default */ + else if (strcmp(CMD_ARGV[6], "cs1") == 0) + chipselect = 1; + else if (strcmp(CMD_ARGV[6], "cs2") == 0) + chipselect = 2; + else { + LOG_ERROR("Unknown arg: %s", CMD_ARGV[6]); + return ERROR_COMMAND_SYNTAX_ERROR; + } + } + + ath79_info = calloc(1, sizeof(struct ath79_flash_bank)); + if (!ath79_info) { + LOG_ERROR("not enough memory"); + return ERROR_FAIL; + } + + ath79_info->chipselect = chipselect; + bank->driver_priv = ath79_info; + + return ERROR_OK; +} + +/* Read the status register of the external SPI flash chip. */ +static int read_status_reg(struct flash_bank *bank, uint32_t *status) +{ + uint8_t spi_bytes[] = {SPIFLASH_READ_STATUS, 0}; + int retval; + + /* Send SPI command "read STATUS" */ + ath79_spi_bitbang_prepare(bank); + retval = ath79_spi_bitbang_bytes( + bank, spi_bytes, sizeof(spi_bytes), + ATH79_XFER_FINAL); + + *status = spi_bytes[1]; + + return retval; +} + +/* check for WIP (write in progress) bit in status register */ +/* timeout in ms */ +static int wait_till_ready(struct flash_bank *bank, int timeout) +{ + uint32_t status; + int retval; + long long endtime; + + endtime = timeval_ms() + timeout; + do { + /* read flash status register */ + retval = read_status_reg(bank, &status); + if (retval != ERROR_OK) + return retval; + + if ((status & SPIFLASH_BSY_BIT) == 0) + return ERROR_OK; + alive_sleep(1); + } while (timeval_ms() < endtime); + + LOG_ERROR("timeout"); + return ERROR_FAIL; +} + +/* Send "write enable" command to SPI flash chip. */ +static int ath79_write_enable(struct flash_bank *bank) +{ + uint32_t status; + int retval; + + uint8_t spi_bytes[] = {SPIFLASH_WRITE_ENABLE}; + + /* Send SPI command "write enable" */ + ath79_spi_bitbang_prepare(bank); + retval = ath79_spi_bitbang_bytes( + bank, spi_bytes, sizeof(spi_bytes), + ATH79_XFER_FINAL); + if (retval != ERROR_OK) + return retval; + + /* read flash status register */ + retval = read_status_reg(bank, &status); + if (retval != ERROR_OK) + return retval; + + /* Check write enabled */ + if ((status & SPIFLASH_WE_BIT) == 0) { + LOG_ERROR("Cannot enable write to flash. Status=0x%08" PRIx32, + status); + return ERROR_FAIL; + } + + return ERROR_OK; +} + +static int erase_command(struct flash_bank *bank, int sector) +{ + struct ath79_flash_bank *ath79_info = bank->driver_priv; + uint32_t offset = bank->sectors[sector].offset; + + uint8_t spi_bytes[] = { + ath79_info->dev->erase_cmd, + offset >> 16, + offset >> 8, + offset + }; + + /* bitbang command */ + ath79_spi_bitbang_prepare(bank); + return ath79_spi_bitbang_bytes( + bank, spi_bytes, sizeof(spi_bytes), + ATH79_XFER_FINAL); +} + +static int ath79_erase_sector(struct flash_bank *bank, int sector) +{ + int retval = ath79_write_enable(bank); + + if (retval != ERROR_OK) + return retval; + + /* send SPI command "block erase" */ + retval = erase_command(bank, sector); + if (retval != ERROR_OK) + return retval; + + /* poll WIP for end of self timed Sector Erase cycle */ + return wait_till_ready(bank, ATH79_MAX_TIMEOUT); +} + +static int ath79_erase(struct flash_bank *bank, int first, int last) +{ + struct target *target = bank->target; + struct ath79_flash_bank *ath79_info = bank->driver_priv; + int retval = ERROR_OK; + int sector; + + LOG_DEBUG("%s: from sector %d to sector %d", __func__, first, last); + + if (target->state != TARGET_HALTED) { + LOG_ERROR("Target not halted"); + return ERROR_TARGET_NOT_HALTED; + } + + if ((first < 0) || (last < first) || (last >= bank->num_sectors)) { + LOG_ERROR("Flash sector invalid"); + return ERROR_FLASH_SECTOR_INVALID; + } + + if (!ath79_info->probed) { + LOG_ERROR("Flash bank not probed"); + return ERROR_FLASH_BANK_NOT_PROBED; + } + + for (sector = first; sector <= last; sector++) { + if (bank->sectors[sector].is_protected) { + LOG_ERROR("Flash sector %d protected", sector); + return ERROR_FAIL; + } + } + + for (sector = first; sector <= last; sector++) { + retval = ath79_erase_sector(bank, sector); + if (retval != ERROR_OK) + break; + keep_alive(); + } + + return retval; +} + +static int ath79_protect(struct flash_bank *bank, int set, + int first, int last) +{ + int sector; + + for (sector = first; sector <= last; sector++) + bank->sectors[sector].is_protected = set; + return ERROR_OK; +} + +static int ath79_write_page(struct flash_bank *bank, const uint8_t *buffer, + uint32_t address, uint32_t len) +{ + struct ath79_flash_bank *ath79_info = bank->driver_priv; + uint8_t spi_bytes[] = { + SPIFLASH_PAGE_PROGRAM, + address >> 16, + address >> 8, + address, + }; + int retval; + uint32_t i; + + if (address & 0xff) { + LOG_ERROR("ath79_write_page: unaligned write address: %08x", + address); + return ERROR_FAIL; + } + if (!ath79_info->spi.page_buf) { + LOG_ERROR("ath79_write_page: page buffer not initialized"); + return ERROR_FAIL; + } + if (len > ath79_info->dev->pagesize) { + LOG_ERROR("ath79_write_page: len bigger than page size %d: %d", + ath79_info->dev->pagesize, len); + return ERROR_FAIL; + } + + for (i = 0; i < len; i++) { + if (buffer[i] != 0xff) + break; + } + if (i == len) /* all 0xff, no need to program. */ + return ERROR_OK; + + LOG_INFO("writing %d bytes to flash page @0x%08x", len, address); + + memcpy(ath79_info->spi.page_buf, buffer, len); + + /* unlock writes */ + retval = ath79_write_enable(bank); + if (retval != ERROR_OK) + return retval; + + /* bitbang command */ + ath79_spi_bitbang_prepare(bank); + retval = ath79_spi_bitbang_bytes( + bank, spi_bytes, sizeof(spi_bytes), + ATH79_XFER_PARTIAL); + if (retval != ERROR_OK) + return retval; + + /* write data */ + return ath79_spi_bitbang_bytes( + bank, ath79_info->spi.page_buf, len, + ATH79_XFER_FINAL); +} + +static int ath79_write_buffer(struct flash_bank *bank, const uint8_t *buffer, + uint32_t address, uint32_t len) +{ + struct ath79_flash_bank *ath79_info = bank->driver_priv; + const uint32_t page_size = ath79_info->dev->pagesize; + int retval; + + LOG_DEBUG("%s: address=0x%08" PRIx32 " len=0x%08" PRIx32, + __func__, address, len); + + while (len > 0) { + int page_len = len > page_size ? page_size : len; + + retval = ath79_write_page( + bank, buffer, address, page_len); + if (retval != ERROR_OK) + return retval; + + buffer += page_size; + address += page_size; + len -= page_len; + } + + return ERROR_OK; +} + +static int ath79_write(struct flash_bank *bank, const uint8_t *buffer, + uint32_t offset, uint32_t count) +{ + struct target *target = bank->target; + int sector; + + LOG_DEBUG("%s: offset=0x%08" PRIx32 " count=0x%08" PRIx32, + __func__, offset, count); + + if (offset < bank->base || offset >= bank->base + bank->size) { + LOG_ERROR("Start address out of range"); + return ERROR_FAIL; + } + + offset -= bank->base; + + if (target->state != TARGET_HALTED) { + LOG_ERROR("Target not halted"); + return ERROR_TARGET_NOT_HALTED; + } + + if (offset + count > bank->size) { + LOG_WARNING("Write pasts end of flash. Extra data discarded."); + count = bank->size - offset; + } + + /* Check sector protection */ + for (sector = 0; sector < bank->num_sectors; sector++) { + /* Start offset in or before this sector? */ + /* End offset in or behind this sector? */ + struct flash_sector *bs = &bank->sectors[sector]; + + if ((offset < (bs->offset + bs->size)) && + ((offset + count - 1) >= bs->offset) && + bs->is_protected) { + LOG_ERROR("Flash sector %d protected", sector); + return ERROR_FAIL; + } + } + + return ath79_write_buffer(bank, buffer, offset, count); +} + +static int ath79_read_buffer(struct flash_bank *bank, uint8_t *buffer, + uint32_t address, uint32_t len) +{ + uint8_t spi_bytes[] = { + SPIFLASH_READ, + address >> 16, + address >> 8, + address, + }; + int retval; + + LOG_DEBUG("%s: address=0x%08" PRIx32 " len=0x%08" PRIx32, + __func__, address, len); + + if (address & 0xff) { + LOG_ERROR("ath79_read_buffer: unaligned read address: %08x", + address); + return ERROR_FAIL; + } + + LOG_INFO("reading %d bytes from flash @0x%08x", len, address); + + /* bitbang command */ + ath79_spi_bitbang_prepare(bank); + retval = ath79_spi_bitbang_bytes( + bank, spi_bytes, sizeof(spi_bytes), ATH79_XFER_PARTIAL); + if (retval != ERROR_OK) + return retval; + + /* read data */ + return ath79_spi_bitbang_bytes( + bank, buffer, len, ATH79_XFER_FINAL); +} + +static int ath79_read(struct flash_bank *bank, uint8_t *buffer, + uint32_t offset, uint32_t count) +{ + struct target *target = bank->target; + + LOG_DEBUG("%s: offset=0x%08" PRIx32 " count=0x%08" PRIx32, + __func__, offset, count); + + if (offset < bank->base || offset >= bank->base + bank->size) { + LOG_ERROR("Start address out of range"); + return ERROR_FAIL; + } + + offset -= bank->base; + + if (target->state != TARGET_HALTED) { + LOG_ERROR("Target not halted"); + return ERROR_TARGET_NOT_HALTED; + } + + if (offset + count > bank->size) { + LOG_WARNING("Reads past end of flash. Extra data discarded."); + count = bank->size - offset; + } + + return ath79_read_buffer(bank, buffer, offset, count); +} + +/* Return ID of flash device */ +static int read_flash_id(struct flash_bank *bank, uint32_t *id) +{ + struct target *target = bank->target; + int retval; + uint8_t spi_bytes[] = {SPIFLASH_READ_ID, 0, 0, 0}; + + if (target->state != TARGET_HALTED) { + LOG_ERROR("Target not halted"); + return ERROR_TARGET_NOT_HALTED; + } + + /* Send SPI command "read ID" */ + ath79_spi_bitbang_prepare(bank); + retval = ath79_spi_bitbang_bytes( + bank, spi_bytes, sizeof(spi_bytes), ATH79_XFER_FINAL); + if (retval != ERROR_OK) + return retval; + + *id = (spi_bytes[1] << 0) + | (spi_bytes[2] << 8) + | (spi_bytes[3] << 16); + + if (*id == 0xffffff) { + LOG_ERROR("No SPI flash found"); + return ERROR_FAIL; + } + + return ERROR_OK; +} + +static int ath79_probe(struct flash_bank *bank) +{ + struct target *target = bank->target; + struct ath79_flash_bank *ath79_info = bank->driver_priv; + struct flash_sector *sectors; + uint32_t id = 0; /* silence uninitialized warning */ + const struct ath79_target *target_device; + int retval; + + if (ath79_info->probed) { + free(bank->sectors); + free(ath79_info->spi.page_buf); + } + ath79_info->probed = 0; + + for (target_device = target_devices; target_device->name; + ++target_device) + if (target_device->tap_idcode == target->tap->idcode) + break; + if (!target_device->name) { + LOG_ERROR("Device ID 0x%" PRIx32 " is not known", + target->tap->idcode); + return ERROR_FAIL; + } + + ath79_info->io_base = target_device->io_base; + + LOG_DEBUG("Found device %s at address 0x%" PRIx32, + target_device->name, bank->base); + + retval = read_flash_id(bank, &id); + if (retval != ERROR_OK) + return retval; + + ath79_info->dev = NULL; + for (const struct flash_device *p = flash_devices; p->name; p++) + if (p->device_id == id) { + ath79_info->dev = p; + break; + } + + if (!ath79_info->dev) { + LOG_ERROR("Unknown flash device (ID 0x%08" PRIx32 ")", id); + return ERROR_FAIL; + } + + LOG_INFO("Found flash device \'%s\' (ID 0x%08" PRIx32 ")", + ath79_info->dev->name, ath79_info->dev->device_id); + + /* Set correct size value */ + bank->size = ath79_info->dev->size_in_bytes; + + /* create and fill sectors array */ + bank->num_sectors = + ath79_info->dev->size_in_bytes / ath79_info->dev->sectorsize; + sectors = calloc(1, sizeof(struct flash_sector) * bank->num_sectors); + if (!sectors) { + LOG_ERROR("not enough memory"); + return ERROR_FAIL; + } + ath79_info->spi.page_buf = malloc(ath79_info->dev->pagesize); + if (!ath79_info->spi.page_buf) { + LOG_ERROR("not enough memory"); + free(sectors); + return ERROR_FAIL; + } + + for (int sector = 0; sector < bank->num_sectors; sector++) { + sectors[sector].offset = sector * ath79_info->dev->sectorsize; + sectors[sector].size = ath79_info->dev->sectorsize; + sectors[sector].is_erased = 0; + sectors[sector].is_protected = 1; + } + + bank->sectors = sectors; + ath79_info->probed = 1; + return ERROR_OK; +} + +static int ath79_auto_probe(struct flash_bank *bank) +{ + struct ath79_flash_bank *ath79_info = bank->driver_priv; + + if (ath79_info->probed) + return ERROR_OK; + return ath79_probe(bank); +} + +static int ath79_flash_blank_check(struct flash_bank *bank) +{ + /* Not implemented */ + return ERROR_OK; +} + +static int ath79_protect_check(struct flash_bank *bank) +{ + /* Not implemented */ + return ERROR_OK; +} + +static int get_ath79_info(struct flash_bank *bank, char *buf, int buf_size) +{ + struct ath79_flash_bank *ath79_info = bank->driver_priv; + + if (!ath79_info->probed) { + snprintf(buf, buf_size, + "\nATH79 flash bank not probed yet\n"); + return ERROR_OK; + } + + snprintf(buf, buf_size, "\nATH79 flash information:\n" + " Device \'%s\' (ID 0x%08" PRIx32 ")\n", + ath79_info->dev->name, ath79_info->dev->device_id); + + return ERROR_OK; +} + +struct flash_driver ath79_flash = { + .name = "ath79", + .flash_bank_command = ath79_flash_bank_command, + .erase = ath79_erase, + .protect = ath79_protect, + .write = ath79_write, + .read = ath79_read, + .probe = ath79_probe, + .auto_probe = ath79_auto_probe, + .erase_check = ath79_flash_blank_check, + .protect_check = ath79_protect_check, + .info = get_ath79_info, +}; diff --git a/src/flash/nor/drivers.c b/src/flash/nor/drivers.c index 56a5cb24..4ad1d92b 100644 --- a/src/flash/nor/drivers.c +++ b/src/flash/nor/drivers.c @@ -28,6 +28,7 @@ extern struct flash_driver at91sam4_flash; extern struct flash_driver at91sam4l_flash; extern struct flash_driver at91sam7_flash; extern struct flash_driver at91samd_flash; +extern struct flash_driver ath79_flash; extern struct flash_driver atsamv_flash; extern struct flash_driver avr_flash; extern struct flash_driver cfi_flash; @@ -80,6 +81,7 @@ static struct flash_driver *flash_drivers[] = { &at91sam4l_flash, &at91sam7_flash, &at91samd_flash, + &ath79_flash, &atsamv_flash, &avr_flash, &cfi_flash, diff --git a/src/target/mips32_pracc.h b/src/target/mips32_pracc.h index fe9f814a..b8b93c64 100644 --- a/src/target/mips32_pracc.h +++ b/src/target/mips32_pracc.h @@ -34,6 +34,8 @@ #define MIPS32_PRACC_PARAM_OUT 0xFF202000 #define PRACC_UPPER_BASE_ADDR (MIPS32_PRACC_BASE_ADDR >> 16) +#define PRACC_MAX_CODE (MIPS32_PRACC_PARAM_OUT - MIPS32_PRACC_TEXT) +#define PRACC_MAX_INSTRUCTIONS (PRACC_MAX_CODE / 4) #define PRACC_OUT_OFFSET (MIPS32_PRACC_PARAM_OUT - MIPS32_PRACC_BASE_ADDR) #define MIPS32_FASTDATA_HANDLER_SIZE 0x80 -- 2.39.5