From 6ca24c64a53605fed9025d7bb7df7cf51c4d0c7d Mon Sep 17 00:00:00 2001 From: "dzu@denx.de" Date: Fri, 21 Apr 2006 18:30:47 +0200 Subject: [PATCH] Add support for BC3450 board Signed-off-by: dzu@denx.de --- CHANGELOG | 3 + MAKEALL | 8 +- Makefile | 3 + board/bc3450/Makefile | 46 ++ board/bc3450/bc3450.c | 677 ++++++++++++++++++++++++++ board/bc3450/cmd_bc3450.c | 813 ++++++++++++++++++++++++++++++++ board/bc3450/config.mk | 41 ++ board/bc3450/mt48lc16m16a2-75.h | 47 ++ board/bc3450/u-boot.lds | 124 +++++ include/configs/BC3450.h | 568 ++++++++++++++++++++++ 10 files changed, 2326 insertions(+), 4 deletions(-) create mode 100644 board/bc3450/Makefile create mode 100644 board/bc3450/bc3450.c create mode 100644 board/bc3450/cmd_bc3450.c create mode 100644 board/bc3450/config.mk create mode 100644 board/bc3450/mt48lc16m16a2-75.h create mode 100644 board/bc3450/u-boot.lds create mode 100644 include/configs/BC3450.h diff --git a/CHANGELOG b/CHANGELOG index 6edcd25a9d..c479e5da5b 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,9 @@ Changes since U-Boot 1.1.4: ====================================================================== +* Added support for BC3450 board + Patch by Stefan Strobl, 21. Oct 2005 + * Update for NC650 board: - Support rev1 and rev2 hardware - adapt to new NAND layer diff --git a/MAKEALL b/MAKEALL index d388afa909..6e620dd9ac 100755 --- a/MAKEALL +++ b/MAKEALL @@ -25,10 +25,10 @@ LIST_5xx=" \ ######################################################################### LIST_5xxx=" \ - cpci5200 EVAL5200 icecube_5100 icecube_5200 \ - lite5200b mcc200 o2dnt pf5200 \ - PM520 Total5100 Total5200 Total5200_Rev2 \ - TQM5200_auto \ + BC3450 cpci5200 EVAL5200 icecube_5100 \ + icecube_5200 lite5200b mcc200 o2dnt \ + pf5200 PM520 Total5100 Total5200 \ + Total5200_Rev2 TQM5200_auto \ " ######################################################################### diff --git a/Makefile b/Makefile index 249c9f03f6..74e94749fc 100644 --- a/Makefile +++ b/Makefile @@ -259,6 +259,9 @@ PATI_config: unconfig aev_config: unconfig @./mkconfig -a aev ppc mpc5xxx tqm5200 +BC3450_config: unconfig + @./mkconfig -a BC3450 ppc mpc5xxx bc3450 + cpci5200_config: unconfig @./mkconfig -a cpci5200 ppc mpc5xxx cpci5200 esd diff --git a/board/bc3450/Makefile b/board/bc3450/Makefile new file mode 100644 index 0000000000..4dec44fd25 --- /dev/null +++ b/board/bc3450/Makefile @@ -0,0 +1,46 @@ +# +# (C) Copyright 2003-2004 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +OBJS := $(BOARD).o cmd_bc3450.o + +$(LIB): $(OBJS) $(SOBJS) + $(AR) crv $@ $(OBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ + +-include .depend + +######################################################################### diff --git a/board/bc3450/bc3450.c b/board/bc3450/bc3450.c new file mode 100644 index 0000000000..a030b82870 --- /dev/null +++ b/board/bc3450/bc3450.c @@ -0,0 +1,677 @@ +/* + * -- Version 1.1 -- + * + * (C) Copyright 2003-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2004 + * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com. + * + * (C) Copyright 2004-2005 + * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de + * + * (C) Copyright 2006 + * Stefan Strobl, GERSYS GmbH, stefan.strobl@gersys.de + * + * History: + * 1.1 - improved SM501 init to meet spec timing + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +#ifdef CONFIG_VIDEO_SM501 +#include +#endif + +#if defined(CONFIG_MPC5200_DDR) +#include "mt46v16m16-75.h" +#else +#include "mt48lc16m16a2-75.h" +#endif + +#ifdef CONFIG_RTC_MPC5200 +#include +#endif + +#ifdef CONFIG_PS2MULT +void ps2mult_early_init(void); +#endif + +#ifndef CFG_RAMBOOT +static void sdram_start (int hi_addr) +{ + long hi_addr_bit = hi_addr ? 0x01000000 : 0; + + /* unlock mode register */ + *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000000 | + hi_addr_bit; + __asm__ volatile ("sync"); + + /* precharge all banks */ + *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | + hi_addr_bit; + __asm__ volatile ("sync"); + +#if SDRAM_DDR + /* set mode register: extended mode */ + *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_EMODE; + __asm__ volatile ("sync"); + + /* set mode register: reset DLL */ + *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE | 0x04000000; + __asm__ volatile ("sync"); +#endif + + /* precharge all banks */ + *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | + hi_addr_bit; + __asm__ volatile ("sync"); + + /* auto refresh */ + *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000004 | + hi_addr_bit; + __asm__ volatile ("sync"); + + /* set mode register */ + *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE; + __asm__ volatile ("sync"); + + /* normal operation */ + *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | hi_addr_bit; + __asm__ volatile ("sync"); +} +#endif + +/* + * ATTENTION: Although partially referenced initdram does NOT make real use + * use of CFG_SDRAM_BASE. The code does not work if CFG_SDRAM_BASE + * is something else than 0x00000000. + */ + +#if defined(CONFIG_MPC5200) +long int initdram (int board_type) +{ + ulong dramsize = 0; + ulong dramsize2 = 0; +#ifndef CFG_RAMBOOT + ulong test1, test2; + + /* setup SDRAM chip selects */ + *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001c; /* 512MB at 0x0 */ + *(vu_long *)MPC5XXX_SDRAM_CS1CFG = 0x40000000; /* disabled */ + __asm__ volatile ("sync"); + + /* setup config registers */ + *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1; + *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2; + __asm__ volatile ("sync"); + +#if SDRAM_DDR + /* set tap delay */ + *(vu_long *)MPC5XXX_CDM_PORCFG = SDRAM_TAPDELAY; + __asm__ volatile ("sync"); +#endif + + /* find RAM size using SDRAM CS0 only */ + sdram_start(0); + test1 = get_ram_size((long *)CFG_SDRAM_BASE, 0x20000000); + sdram_start(1); + test2 = get_ram_size((long *)CFG_SDRAM_BASE, 0x20000000); + if (test1 > test2) { + sdram_start(0); + dramsize = test1; + } else { + dramsize = test2; + } + + /* memory smaller than 1MB is impossible */ + if (dramsize < (1 << 20)) { + dramsize = 0; + } + + /* set SDRAM CS0 size according to the amount of RAM found */ + if (dramsize > 0) { + *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x13 + + __builtin_ffs(dramsize >> 20) - 1; + } else { + *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */ + } + + /* let SDRAM CS1 start right after CS0 */ + *(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize + 0x0000001c; /* 512MB */ + + /* find RAM size using SDRAM CS1 only */ + sdram_start(0); + test1 = get_ram_size((long *)(CFG_SDRAM_BASE + dramsize), 0x20000000); + sdram_start(1); + test2 = get_ram_size((long *)(CFG_SDRAM_BASE + dramsize), 0x20000000); + if (test1 > test2) { + sdram_start(0); + dramsize2 = test1; + } else { + dramsize2 = test2; + } + + /* memory smaller than 1MB is impossible */ + if (dramsize2 < (1 << 20)) { + dramsize2 = 0; + } + + /* set SDRAM CS1 size according to the amount of RAM found */ + if (dramsize2 > 0) { + *(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize + | (0x13 + __builtin_ffs(dramsize2 >> 20) - 1); + } else { + *(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */ + } + +#else /* CFG_RAMBOOT */ + + /* retrieve size of memory connected to SDRAM CS0 */ + dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF; + if (dramsize >= 0x13) { + dramsize = (1 << (dramsize - 0x13)) << 20; + } else { + dramsize = 0; + } + + /* retrieve size of memory connected to SDRAM CS1 */ + dramsize2 = *(vu_long *)MPC5XXX_SDRAM_CS1CFG & 0xFF; + if (dramsize2 >= 0x13) { + dramsize2 = (1 << (dramsize2 - 0x13)) << 20; + } else { + dramsize2 = 0; + } + +#endif /* CFG_RAMBOOT */ + + return dramsize; +} + +#elif defined(CONFIG_MGT5100) + +long int initdram (int board_type) +{ + ulong dramsize = 0; +#ifndef CFG_RAMBOOT + ulong test1, test2; + + /* setup and enable SDRAM chip selects */ + *(vu_long *)MPC5XXX_SDRAM_START = 0x00000000; + *(vu_long *)MPC5XXX_SDRAM_STOP = 0x0000ffff; /* 2G */ + *(vu_long *)MPC5XXX_ADDECR |= (1 << 22); /* Enable SDRAM */ + __asm__ volatile ("sync"); + + /* setup config registers */ + *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1; + *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2; + + /* address select register */ + *(vu_long *)MPC5XXX_SDRAM_XLBSEL = SDRAM_ADDRSEL; + __asm__ volatile ("sync"); + + /* find RAM size */ + sdram_start(0); + test1 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x80000000); + sdram_start(1); + test2 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x80000000); + if (test1 > test2) { + sdram_start(0); + dramsize = test1; + } else { + dramsize = test2; + } + + /* set SDRAM end address according to size */ + *(vu_long *)MPC5XXX_SDRAM_STOP = ((dramsize - 1) >> 15); + +#else /* CFG_RAMBOOT */ + + /* Retrieve amount of SDRAM available */ + dramsize = ((*(vu_long *)MPC5XXX_SDRAM_STOP + 1) << 15); + +#endif /* CFG_RAMBOOT */ + + return dramsize; +} + +#else +#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined +#endif + +int checkboard (void) +{ +#if defined (CONFIG_TQM5200) + puts ("Board: TQM5200 (TQ-Components GmbH)\n"); +#endif + +#if defined (CONFIG_BC3450) + puts ("Dev: GERSYS BC3450\n"); +#endif + + return 0; +} + +void flash_preinit(void) +{ + /* + * Now, when we are in RAM, enable flash write + * access for detection process. + * Note that CS_BOOT cannot be cleared when + * executing in flash. + */ +#if defined(CONFIG_MGT5100) + *(vu_long *)MPC5XXX_ADDECR &= ~(1 << 25); /* disable CS_BOOT */ + *(vu_long *)MPC5XXX_ADDECR |= (1 << 16); /* enable CS0 */ +#endif + *(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */ +} + + +#ifdef CONFIG_PCI +static struct pci_controller hose; + +extern void pci_mpc5xxx_init(struct pci_controller *); + +void pci_init_board(void) +{ + pci_mpc5xxx_init(&hose); +} +#endif + +#if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) +#define GPIO_PSC1_4 0x01000000UL + +void init_ide_reset (void) +{ + debug ("init_ide_reset\n"); + + /* Configure PSC1_4 as GPIO output for ATA reset */ + *(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_PSC1_4; + *(vu_long *) MPC5XXX_WU_GPIO_DIR |= GPIO_PSC1_4; +} + +void ide_set_reset (int idereset) +{ + debug ("ide_reset(%d)\n", idereset); + + if (idereset) { + *(vu_long *) MPC5XXX_WU_GPIO_DATA &= ~GPIO_PSC1_4; + } else { + *(vu_long *) MPC5XXX_WU_GPIO_DATA |= GPIO_PSC1_4; + } +} +#endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */ + +#ifdef CONFIG_POST +/* + * Reads GPIO pin PSC6_3. A keypress is reported, if PSC6_3 is low. If PSC6_3 + * is left open, no keypress is detected. + */ +int post_hotkeys_pressed(void) +{ + struct mpc5xxx_gpio *gpio; + + gpio = (struct mpc5xxx_gpio*) MPC5XXX_GPIO; + + /* + * Configure PSC6_1 and PSC6_3 as GPIO. PSC6 then couldn't be used in + * CODEC or UART mode. Consumer IrDA should still be possible. + */ + gpio->port_config &= ~(0x07000000); + gpio->port_config |= 0x03000000; + + /* Enable GPIO for GPIO_IRDA_1 (IR_USB_CLK pin) = PSC6_3 */ + gpio->simple_gpioe |= 0x20000000; + + /* Configure GPIO_IRDA_1 as input */ + gpio->simple_ddr &= ~(0x20000000); + + return ((gpio->simple_ival & 0x20000000) ? 0 : 1); +} +#endif + +#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER) + +void post_word_store (ulong a) +{ + volatile ulong *save_addr = + (volatile ulong *)(MPC5XXX_SRAM + MPC5XXX_SRAM_POST_SIZE); + + *save_addr = a; +} + +ulong post_word_load (void) +{ + volatile ulong *save_addr = + (volatile ulong *)(MPC5XXX_SRAM + MPC5XXX_SRAM_POST_SIZE); + + return *save_addr; +} +#endif /* CONFIG_POST || CONFIG_LOGBUFFER*/ + + +#ifdef CONFIG_BOARD_EARLY_INIT_R +int board_early_init_r (void) +{ +#ifdef CONFIG_RTC_MPC5200 + struct rtc_time t; + + /* set to Wed Dec 31 19:00:00 1969 */ + t.tm_sec = t.tm_min = 0; + t.tm_hour = 19; + t.tm_mday = 31; + t.tm_mon = 12; + t.tm_year = 1969; + t.tm_wday = 3; + + rtc_set(&t); +#endif /* CONFIG_RTC_MPC5200 */ + +#ifdef CONFIG_PS2MULT + ps2mult_early_init(); +#endif /* CONFIG_PS2MULT */ + return (0); +} +#endif /* CONFIG_BOARD_EARLY_INIT_R */ + + +int last_stage_init (void) +{ + /* + * auto scan for really existing devices and re-set chip select + * configuration. + */ + u16 save, tmp; + int restore; + + /* + * Check for SRAM and SRAM size + */ + + /* save original SRAM content */ + save = *(volatile u16 *)CFG_CS2_START; + restore = 1; + + /* write test pattern to SRAM */ + *(volatile u16 *)CFG_CS2_START = 0xA5A5; + __asm__ volatile ("sync"); + /* + * Put a different pattern on the data lines: otherwise they may float + * long enough to read back what we wrote. + */ + tmp = *(volatile u16 *)CFG_FLASH_BASE; + if (tmp == 0xA5A5) + puts ("!! possible error in SRAM detection\n"); + + if (*(volatile u16 *)CFG_CS2_START != 0xA5A5) { + /* no SRAM at all, disable cs */ + *(vu_long *)MPC5XXX_ADDECR &= ~(1 << 18); + *(vu_long *)MPC5XXX_CS2_START = 0x0000FFFF; + *(vu_long *)MPC5XXX_CS2_STOP = 0x0000FFFF; + restore = 0; + __asm__ volatile ("sync"); + } else if (*(volatile u16 *)(CFG_CS2_START + (1<<19)) == 0xA5A5) { + /* make sure that we access a mirrored address */ + *(volatile u16 *)CFG_CS2_START = 0x1111; + __asm__ volatile ("sync"); + if (*(volatile u16 *)(CFG_CS2_START + (1<<19)) == 0x1111) { + /* SRAM size = 512 kByte */ + *(vu_long *)MPC5XXX_CS2_STOP = STOP_REG(CFG_CS2_START, + 0x80000); + __asm__ volatile ("sync"); + puts ("SRAM: 512 kB\n"); + } + else + puts ("!! possible error in SRAM detection\n"); + } else { + puts ("SRAM: 1 MB\n"); + } + /* restore origianl SRAM content */ + if (restore) { + *(volatile u16 *)CFG_CS2_START = save; + __asm__ volatile ("sync"); + } + + /* + * Check for Grafic Controller + */ + + /* save origianl FB content */ + save = *(volatile u16 *)CFG_CS1_START; + restore = 1; + + /* write test pattern to FB memory */ + *(volatile u16 *)CFG_CS1_START = 0xA5A5; + __asm__ volatile ("sync"); + /* + * Put a different pattern on the data lines: otherwise they may float + * long enough to read back what we wrote. + */ + tmp = *(volatile u16 *)CFG_FLASH_BASE; + if (tmp == 0xA5A5) + puts ("!! possible error in grafic controller detection\n"); + + if (*(volatile u16 *)CFG_CS1_START != 0xA5A5) { + /* no grafic controller at all, disable cs */ + *(vu_long *)MPC5XXX_ADDECR &= ~(1 << 17); + *(vu_long *)MPC5XXX_CS1_START = 0x0000FFFF; + *(vu_long *)MPC5XXX_CS1_STOP = 0x0000FFFF; + restore = 0; + __asm__ volatile ("sync"); + } else { + puts ("VGA: SMI501 (Voyager) with 8 MB\n"); + } + /* restore origianl FB content */ + if (restore) { + *(volatile u16 *)CFG_CS1_START = save; + __asm__ volatile ("sync"); + } + + return 0; +} + +#ifdef CONFIG_VIDEO_SM501 + +#define DISPLAY_WIDTH 640 +#define DISPLAY_HEIGHT 480 + +#ifdef CONFIG_VIDEO_SM501_8BPP +#error CONFIG_VIDEO_SM501_8BPP not supported. +#endif /* CONFIG_VIDEO_SM501_8BPP */ + +#ifdef CONFIG_VIDEO_SM501_16BPP +#error CONFIG_VIDEO_SM501_16BPP not supported. +#endif /* CONFIG_VIDEO_SM501_16BPP */ + +#ifdef CONFIG_VIDEO_SM501_32BPP +static const SMI_REGS init_regs [] = +{ +#if defined (CONFIG_BC3450_FP) && !defined (CONFIG_BC3450_CRT) + /* FP only */ + {0x00004, 0x0}, + {0x00048, 0x00021807}, + {0x0004C, 0x091a0a01}, + {0x00054, 0x1}, + {0x00040, 0x00021807}, + {0x00044, 0x091a0a01}, + {0x00054, 0x0}, + {0x80000, 0x01013106}, + {0x80004, 0xc428bb17}, + {0x80000, 0x03013106}, + {0x8000C, 0x00000000}, + {0x80010, 0x0a000a00}, + {0x80014, 0x02800000}, + {0x80018, 0x01e00000}, + {0x8001C, 0x00000000}, + {0x80020, 0x01e00280}, + {0x80024, 0x02fa027f}, + {0x80028, 0x004a028b}, + {0x8002C, 0x020c01df}, + {0x80030, 0x000201e9}, + {0x80200, 0x00010200}, + {0x80000, 0x0f013106}, +#elif defined (CONFIG_BC3450_CRT) && !defined (CONFIG_BC3450_FP) + /* CRT only */ + {0x00004, 0x0}, + {0x00048, 0x00021807}, + {0x0004C, 0x10090a01}, + {0x00054, 0x1}, + {0x00040, 0x00021807}, + {0x00044, 0x10090a01}, + {0x00054, 0x0}, + {0x80200, 0x00010000}, + {0x80204, 0x0}, + {0x80208, 0x0A000A00}, + {0x8020C, 0x02fa027f}, + {0x80210, 0x004a028b}, + {0x80214, 0x020c01df}, + {0x80218, 0x000201e9}, + {0x80200, 0x00013306}, +#else /* panel + CRT */ + {0x00004, 0x0}, + {0x00048, 0x00021807}, + {0x0004C, 0x091a0a01}, + {0x00054, 0x1}, + {0x00040, 0x00021807}, + {0x00044, 0x091a0a01}, + {0x00054, 0x0}, + {0x80000, 0x0f013106}, + {0x80004, 0xc428bb17}, + {0x8000C, 0x00000000}, + {0x80010, 0x0a000a00}, + {0x80014, 0x02800000}, + {0x80018, 0x01e00000}, + {0x8001C, 0x00000000}, + {0x80020, 0x01e00280}, + {0x80024, 0x02fa027f}, + {0x80028, 0x004a028b}, + {0x8002C, 0x020c01df}, + {0x80030, 0x000201e9}, + {0x80200, 0x00010000}, +#endif + {0, 0} +}; +#endif /* CONFIG_VIDEO_SM501_32BPP */ + +#ifdef CONFIG_CONSOLE_EXTRA_INFO +/* + * Return text to be printed besides the logo. + */ +void video_get_info_str (int line_number, char *info) +{ + if (line_number == 1) { +#if defined (CONFIG_TQM5200) + strcpy (info, " Board: TQM5200 (TQ-Components GmbH)"); +#else +#error No supported board selected +#endif /* CONFIG_TQM5200 */ + +#if defined (CONFIG_BC3450) + } else if (line_number == 2) { + strcpy (info, " Dev: GERSYS BC3450"); +#endif /* CONFIG_BC3450 */ + } + else { + info [0] = '\0'; + } +} +#endif + +/* + * Returns SM501 register base address. First thing called in the + * driver. Checks if SM501 is physically present. + */ +unsigned int board_video_init (void) +{ + u16 save, tmp; + int restore, ret; + + /* + * Check for Grafic Controller + */ + + /* save origianl FB content */ + save = *(volatile u16 *)CFG_CS1_START; + restore = 1; + + /* write test pattern to FB memory */ + *(volatile u16 *)CFG_CS1_START = 0xA5A5; + __asm__ volatile ("sync"); + /* + * Put a different pattern on the data lines: otherwise they may float + * long enough to read back what we wrote. + */ + tmp = *(volatile u16 *)CFG_FLASH_BASE; + if (tmp == 0xA5A5) + puts ("!! possible error in grafic controller detection\n"); + + if (*(volatile u16 *)CFG_CS1_START != 0xA5A5) { + /* no grafic controller found */ + restore = 0; + ret = 0; + } else { + ret = SM501_MMIO_BASE; + } + + if (restore) { + *(volatile u16 *)CFG_CS1_START = save; + __asm__ volatile ("sync"); + } + return ret; +} + +/* + * Returns SM501 framebuffer address + */ +unsigned int board_video_get_fb (void) +{ + return SM501_FB_BASE; +} + +/* + * Called after initializing the SM501 and before clearing the screen. + */ +void board_validate_screen (unsigned int base) +{ +} + +/* + * Return a pointer to the initialization sequence. + */ +const SMI_REGS *board_get_regs (void) +{ + return init_regs; +} + +int board_get_width (void) +{ + return DISPLAY_WIDTH; +} + +int board_get_height (void) +{ + return DISPLAY_HEIGHT; +} + +#endif /* CONFIG_VIDEO_SM501 */ diff --git a/board/bc3450/cmd_bc3450.c b/board/bc3450/cmd_bc3450.c new file mode 100644 index 0000000000..1442b68df1 --- /dev/null +++ b/board/bc3450/cmd_bc3450.c @@ -0,0 +1,813 @@ +/* + * (C) Copyright 2005 + * Stefan Strobl, GERSYS GmbH, stefan.strobl@gersys.de + * + * (C) Copyright 2005 + * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include + +/* + * BC3450 specific commands + */ +#if (CONFIG_COMMANDS & CFG_CMD_BSP) + +#undef DEBUG +#ifdef DEBUG +# define dprintf(fmt,args...) printf(fmt, ##args) +#else +# define dprintf(fmt,args...) +#endif + +/* + * Definitions for DS1620 chip + */ +#define THERM_START_CONVERT 0xee +#define THERM_RESET 0xaf +#define THERM_READ_CONFIG 0xac +#define THERM_READ_TEMP 0xaa +#define THERM_READ_TL 0xa2 +#define THERM_READ_TH 0xa1 +#define THERM_WRITE_CONFIG 0x0c +#define THERM_WRITE_TL 0x02 +#define THERM_WRITE_TH 0x01 + +#define CFG_CPU 2 +#define CFG_1SHOT 1 +#define CFG_STANDALONE 0 + +struct therm { + int hi; + int lo; +}; + +/* + * SM501 Register + */ +#define SM501_GPIO_CTRL_LOW 0x00000008UL /* gpio pins 0..31 */ +#define SM501_GPIO_CTRL_HIGH 0x0000000CUL /* gpio pins 32..63 */ +#define SM501_POWER_MODE0_GATE 0x00000040UL +#define SM501_POWER_MODE1_GATE 0x00000048UL +#define POWER_MODE_GATE_GPIO_PWM_I2C 0x00000040UL +#define SM501_GPIO_DATA_LOW 0x00010000UL +#define SM501_GPIO_DATA_HIGH 0x00010004UL +#define SM501_GPIO_DATA_DIR_LOW 0x00010008UL +#define SM501_GPIO_DATA_DIR_HIGH 0x0001000CUL +#define SM501_PANEL_DISPLAY_CONTROL 0x00080000UL +#define SM501_CRT_DISPLAY_CONTROL 0x00080200UL + +/* SM501 CRT Display Control Bits */ +#define SM501_CDC_SEL (1 << 9) +#define SM501_CDC_TE (1 << 8) +#define SM501_CDC_E (1 << 2) + +/* SM501 Panel Display Control Bits */ +#define SM501_PDC_FPEN (1 << 27) +#define SM501_PDC_BIAS (1 << 26) +#define SM501_PDC_DATA (1 << 25) +#define SM501_PDC_VDDEN (1 << 24) + +/* SM501 GPIO Data LOW Bits */ +#define SM501_GPIO24 0x01000000 +#define SM501_GPIO25 0x02000000 +#define SM501_GPIO26 0x04000000 +#define SM501_GPIO27 0x08000000 +#define SM501_GPIO28 0x10000000 +#define SM501_GPIO29 0x20000000 +#define SM501_GPIO30 0x40000000 +#define SM501_GPIO31 0x80000000 + +/* SM501 GPIO Data HIGH Bits */ +#define SM501_GPIO46 0x00004000 +#define SM501_GPIO47 0x00008000 +#define SM501_GPIO48 0x00010000 +#define SM501_GPIO49 0x00020000 +#define SM501_GPIO50 0x00040000 +#define SM501_GPIO51 0x00080000 + +/* BC3450 GPIOs @ SM501 Data LOW */ +#define DIP (SM501_GPIO24 | SM501_GPIO25 | SM501_GPIO26 | SM501_GPIO27) +#define DS1620_DQ SM501_GPIO29 /* I/O */ +#define DS1620_CLK SM501_GPIO30 /* High active O/P */ +#define DS1620_RES SM501_GPIO31 /* Low active O/P */ +/* BC3450 GPIOs @ SM501 Data HIGH */ +#define BUZZER SM501_GPIO47 /* Low active O/P */ +#define DS1620_TLOW SM501_GPIO48 /* High active I/P */ +#define PWR_OFF SM501_GPIO49 /* Low active O/P */ +#define FP_DATA_TRI SM501_GPIO50 /* High active O/P */ + + +/* + * Initialise GPIO on SM501 + * + * This function may be called from several other functions. + * Yet, the initialisation sequence is executed only the first + * time the function is called. + */ +int sm501_gpio_init(void) +{ + static int init_done = 0; + + if(init_done) { +/* dprintf("sm501_gpio_init: nothing to be done.\n"); */ + return 1; + } + + /* enable SM501 GPIO control (in both power modes) */ + *(vu_long *) (SM501_MMIO_BASE + SM501_POWER_MODE0_GATE) |= POWER_MODE_GATE_GPIO_PWM_I2C; + *(vu_long *) (SM501_MMIO_BASE + SM501_POWER_MODE1_GATE) |= POWER_MODE_GATE_GPIO_PWM_I2C; + + /* set up default O/Ps */ + *(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_LOW) &= ~(DS1620_RES | DS1620_CLK); + *(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_LOW) |= DS1620_DQ; + *(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_HIGH) &= ~(FP_DATA_TRI); + *(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_HIGH) |= (BUZZER | PWR_OFF); + + /* configure directions for SM501 GPIO pins */ + *(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_CTRL_LOW) &= ~(0xFF << 24); + *(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_CTRL_HIGH) &= ~(0x3F << 14); + *(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_DIR_LOW) &= ~(DIP | DS1620_DQ); + *(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_DIR_LOW) |= (DS1620_RES | DS1620_CLK); + *(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_DIR_HIGH) &= ~DS1620_TLOW; + *(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_DIR_HIGH) |= (PWR_OFF | BUZZER | FP_DATA_TRI); + + init_done = 1; +/* dprintf("sm501_gpio_init: done.\n"); */ + return 0; +} + + +/* + * dip - read Config Inputs + * + * read and prints the dip switch + * and/or external config inputs (4bits) 0...0x0F + */ +int cmd_dip (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + vu_long rc = 0; + + sm501_gpio_init(); + + /* read dip switch */ + rc = *(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_LOW); + rc = ~rc; + rc &= DIP; + rc = (int)(rc >> 24); + + /* plausibility check */ + if (rc > 0x0F) + return -1; + + printf ("0x%x\n", rc); + return 0; +} + +U_BOOT_CMD( + dip , 1, 1, cmd_dip, + "dip - read dip switch and config inputs\n", + "\n" + " - prints the state of the dip switch and/or\n" + " external configuration inputs as hex value.\n" + " - \"Config 1\" is the LSB\n" + ); + + +/* + * buz - turns Buzzer on/off + */ +#ifdef CONFIG_BC3450_BUZZER +static int cmd_buz (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + if (argc != 2) { + printf ("Usage:\nspecify one argument: \"on\" or \"off\"\n"); + return 1; + } + + sm501_gpio_init(); + + if (strncmp (argv[1], "on", 2) == 0) { + *(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_HIGH) &= ~(BUZZER); + return 0; + } + else if (strncmp (argv[1], "off", 3) == 0) { + *(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_HIGH) |= BUZZER; + return 0; + } + printf ("Usage:\nspecify one argument: \"on\" or \"off\"\n"); + return 1; +} + +U_BOOT_CMD( + buz , 2, 1, cmd_buz, + "buz - turns buzzer on/off\n", + "\n" + "buz \n" + " - turns the buzzer on or off\n" + ); +#endif /* CONFIG_BC3450_BUZZER */ + + +/* + * fp - front panel commands + */ +static int cmd_fp (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + sm501_gpio_init(); + + if (strncmp (argv[1], "on", 2) == 0) { + /* turn on VDD first */ + *(vu_long *)(SM501_MMIO_BASE + SM501_PANEL_DISPLAY_CONTROL) |= SM501_PDC_VDDEN; + udelay(1000); + /* then put data on */ + *(vu_long *)(SM501_MMIO_BASE + SM501_PANEL_DISPLAY_CONTROL) |= SM501_PDC_DATA; + /* wait some time and enable backlight */ + udelay(1000); + *(vu_long *)(SM501_MMIO_BASE + SM501_PANEL_DISPLAY_CONTROL) |= SM501_PDC_BIAS; + udelay(1000); + *(vu_long *)(SM501_MMIO_BASE + SM501_PANEL_DISPLAY_CONTROL) |= SM501_PDC_FPEN; + return 0; + } + else if (strncmp (argv[1], "off", 3) == 0) { + /* turn off the backlight first */ + *(vu_long *)(SM501_MMIO_BASE + SM501_PANEL_DISPLAY_CONTROL) &= ~SM501_PDC_FPEN; + udelay(1000); + *(vu_long *)(SM501_MMIO_BASE + SM501_PANEL_DISPLAY_CONTROL) &= ~SM501_PDC_BIAS; + udelay(200000); + /* wait some time, then remove data */ + *(vu_long *)(SM501_MMIO_BASE + SM501_PANEL_DISPLAY_CONTROL) &= ~SM501_PDC_DATA; + udelay(1000); + /* and remove VDD last */ + *(vu_long *)(SM501_MMIO_BASE + SM501_PANEL_DISPLAY_CONTROL) &= ~SM501_PDC_VDDEN; + return 0; + } + else if (strncmp (argv[1], "bl", 2) == 0) { + /* turn on/off backlight only */ + if (strncmp (argv[2], "on", 2) == 0) { + *(vu_long *)(SM501_MMIO_BASE + SM501_PANEL_DISPLAY_CONTROL) |= SM501_PDC_BIAS; + udelay(1000); + *(vu_long *)(SM501_MMIO_BASE + SM501_PANEL_DISPLAY_CONTROL) |= SM501_PDC_FPEN; + return 0; + } + else if (strncmp (argv[2], "off", 3) == 0) { + *(vu_long *)(SM501_MMIO_BASE + SM501_PANEL_DISPLAY_CONTROL) &= ~SM501_PDC_FPEN; + udelay(1000); + *(vu_long *)(SM501_MMIO_BASE + SM501_PANEL_DISPLAY_CONTROL) &= ~SM501_PDC_BIAS; + return 0; + } + } +#ifdef CONFIG_BC3450_CRT + else if (strncmp (argv[1], "crt", 3) == 0) { + /* enables/disables the crt output (debug only) */ + if(strncmp (argv[2], "on", 2) == 0) { + *(vu_long *)(SM501_MMIO_BASE + SM501_CRT_DISPLAY_CONTROL) |= + (SM501_CDC_TE | SM501_CDC_E); + *(vu_long *)(SM501_MMIO_BASE + SM501_CRT_DISPLAY_CONTROL) &= + ~SM501_CDC_SEL; + return 0; + } + else if (strncmp (argv[2], "off", 3) == 0) { + *(vu_long *)(SM501_MMIO_BASE + SM501_CRT_DISPLAY_CONTROL) &= + ~(SM501_CDC_TE | SM501_CDC_E); + *(vu_long *)(SM501_MMIO_BASE + SM501_CRT_DISPLAY_CONTROL) |= + SM501_CDC_SEL; + return 0; + } + } +#endif /* CONFIG_BC3450_CRT */ + printf("Usage:%s\n", cmdtp->help); + return 1; +} + +U_BOOT_CMD( + fp , 3, 1, cmd_fp, + "fp - front panes access functions\n", + "\n" + "fp bl \n" + " - turns the CCFL backlight of the display on/off\n" + "fp \n" + " - turns the whole display on/off\n" +#ifdef CONFIG_BC3450_CRT + "fp crt \n" + " - enables/disables the crt output (debug only)\n" +#endif /* CONFIG_BC3450_CRT */ + ); + + +/* + * temp - DS1620 thermometer + */ +/* GERSYS BC3450 specific functions */ +static inline void bc_ds1620_set_clk(int clk) +{ + if(clk) + *(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_LOW) |= DS1620_CLK; + else + *(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_LOW) &= ~DS1620_CLK; +} + +static inline void bc_ds1620_set_data(int dat) +{ + if(dat) + *(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_LOW) |= DS1620_DQ; + else + *(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_LOW) &= ~DS1620_DQ; +} + +static inline int bc_ds1620_get_data(void) +{ + vu_long rc; + rc = *(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_LOW); + rc &= DS1620_DQ; + if(rc != 0) + rc = 1; + return (int)rc; +} + +static inline void bc_ds1620_set_data_dir(int dir) +{ + if(dir) /* in */ + *(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_DIR_LOW) &= ~DS1620_DQ; + else /* out */ + *(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_DIR_LOW) |= DS1620_DQ; +} + +static inline void bc_ds1620_set_reset(int res) +{ + if(res) + *(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_LOW) |= DS1620_RES; + else + *(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_LOW) &= ~DS1620_RES; +} + +/* hardware independent functions */ +static void ds1620_send_bits(int nr, int value) +{ + int i; + + for (i = 0; i < nr; i++) { + bc_ds1620_set_data(value & 1); + bc_ds1620_set_clk(0); + udelay(1); + bc_ds1620_set_clk(1); + udelay(1); + + value >>= 1; + } +} + +static unsigned int ds1620_recv_bits(int nr) +{ + unsigned int value = 0, mask = 1; + int i; + + bc_ds1620_set_data(0); + + for (i = 0; i < nr; i++) { + bc_ds1620_set_clk(0); + udelay(1); + + if (bc_ds1620_get_data()) + value |= mask; + + mask <<= 1; + + bc_ds1620_set_clk(1); + udelay(1); + } + + return value; +} + +static void ds1620_out(int cmd, int bits, int value) +{ + bc_ds1620_set_clk(1); + bc_ds1620_set_data_dir(0); + + bc_ds1620_set_reset(0); + udelay(1); + bc_ds1620_set_reset(1); + + udelay(1); + + ds1620_send_bits(8, cmd); + if (bits) + ds1620_send_bits(bits, value); + + udelay(1); + + /* go stand alone */ + bc_ds1620_set_data_dir(1); + bc_ds1620_set_reset(0); + bc_ds1620_set_clk(0); + + udelay(10000); +} + +static unsigned int ds1620_in(int cmd, int bits) +{ + unsigned int value; + + bc_ds1620_set_clk(1); + bc_ds1620_set_data_dir(0); + + bc_ds1620_set_reset(0); + udelay(1); + bc_ds1620_set_reset(1); + + udelay(1); + + ds1620_send_bits(8, cmd); + + bc_ds1620_set_data_dir(1); + value = ds1620_recv_bits(bits); + + /* go stand alone */ + bc_ds1620_set_data_dir(1); + bc_ds1620_set_reset(0); + bc_ds1620_set_clk(0); + + return value; +} + +static int cvt_9_to_int(unsigned int val) +{ + if (val & 0x100) + val |= 0xfffffe00; + + return val; +} + +/* set thermostate thresholds */ +static void ds1620_write_state(struct therm *therm) +{ + ds1620_out(THERM_WRITE_TL, 9, therm->lo); + ds1620_out(THERM_WRITE_TH, 9, therm->hi); + ds1620_out(THERM_START_CONVERT, 0, 0); +} + +static int cmd_temp (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + int i; + struct therm therm; + + sm501_gpio_init(); + + /* print temperature */ + if (argc == 1) { + i = cvt_9_to_int(ds1620_in(THERM_READ_TEMP, 9)); + printf("%d.%d C\n", i >> 1, i & 1 ? 5 : 0); + return 0; + } + + /* set to default operation */ + if (strncmp (argv[1], "set", 3) == 0) { + if(strncmp (argv[2], "default", 3) == 0) { + therm.hi = +88; + therm.lo = -20; + therm.hi <<= 1; + therm.lo <<= 1; + ds1620_write_state(&therm); + ds1620_out(THERM_WRITE_CONFIG, 8, CFG_STANDALONE); + return 0; + } + } + + printf ("Usage:%s\n", cmdtp->help); + return 1; +} + +U_BOOT_CMD( + temp , 3, 1, cmd_temp, + "temp - print current temperature\n", + "\n" + "temp\n" + " - print current temperature\n" +); + +#ifdef CONFIG_BC3450_CAN +/* + * Initialise CAN interface + * + * return 1 on CAN initialization failure + * return 0 if no failure + */ +int can_init(void) +{ + static int init_done = 0; + int i; + struct mpc5xxx_mscan *can1 = + (struct mpc5xxx_mscan *)(CFG_MBAR + 0x0900); + struct mpc5xxx_mscan *can2 = + (struct mpc5xxx_mscan *)(CFG_MBAR + 0x0980); + + /* GPIO configuration of the CAN pins is done in BC3450.h */ + + if (!init_done) { + /* init CAN 1 */ + can1->canctl1 |= 0x80; /* CAN enable */ + udelay(100); + + i = 0; + can1->canctl0 |= 0x02; /* sleep mode */ + /* wait until sleep mode reached */ + while (!(can1->canctl1 & 0x02)) { + udelay(10); + i++; + if (i == 10) { + printf ("%s: CAN1 initialize error, " + "can not enter sleep mode!\n", + __FUNCTION__); + return 1; + } + } + i = 0; + can1->canctl0 = 0x01; /* enter init mode */ + /* wait until init mode reached */ + while (!(can1->canctl1 & 0x01)) { + udelay(10); + i++; + if (i == 10) { + printf ("%s: CAN1 initialize error, " + "can not enter init mode!\n", + __FUNCTION__); + return 1; + } + } + can1->canctl1 = 0x80; + can1->canctl1 |= 0x40; + can1->canbtr0 = 0x0F; + can1->canbtr1 = 0x7F; + can1->canidac &= ~(0x30); + can1->canidar1 = 0x00; + can1->canidar3 = 0x00; + can1->canidar5 = 0x00; + can1->canidar7 = 0x00; + can1->canidmr0 = 0xFF; + can1->canidmr1 = 0xFF; + can1->canidmr2 = 0xFF; + can1->canidmr3 = 0xFF; + can1->canidmr4 = 0xFF; + can1->canidmr5 = 0xFF; + can1->canidmr6 = 0xFF; + can1->canidmr7 = 0xFF; + + i = 0; + can1->canctl0 &= ~(0x01); /* leave init mode */ + can1->canctl0 &= ~(0x02); + /* wait until init and sleep mode left */ + while ((can1->canctl1 & 0x01) || (can1->canctl1 & 0x02)) { + udelay(10); + i++; + if (i == 10) { + printf ("%s: CAN1 initialize error, " + "can not leave init/sleep mode!\n", + __FUNCTION__); + return 1; + } + } + + /* init CAN 2 */ + can2->canctl1 |= 0x80; /* CAN enable */ + udelay(100); + + i = 0; + can2->canctl0 |= 0x02; /* sleep mode */ + /* wait until sleep mode reached */ + while (!(can2->canctl1 & 0x02)) { + udelay(10); + i++; + if (i == 10) { + printf ("%s: CAN2 initialize error, " + "can not enter sleep mode!\n", + __FUNCTION__); + return 1; + } + } + i = 0; + can2->canctl0 = 0x01; /* enter init mode */ + /* wait until init mode reached */ + while (!(can2->canctl1 & 0x01)) { + udelay(10); + i++; + if (i == 10) { + printf ("%s: CAN2 initialize error, " + "can not enter init mode!\n", + __FUNCTION__); + return 1; + } + } + can2->canctl1 = 0x80; + can2->canctl1 |= 0x40; + can2->canbtr0 = 0x0F; + can2->canbtr1 = 0x7F; + can2->canidac &= ~(0x30); + can2->canidar1 = 0x00; + can2->canidar3 = 0x00; + can2->canidar5 = 0x00; + can2->canidar7 = 0x00; + can2->canidmr0 = 0xFF; + can2->canidmr1 = 0xFF; + can2->canidmr2 = 0xFF; + can2->canidmr3 = 0xFF; + can2->canidmr4 = 0xFF; + can2->canidmr5 = 0xFF; + can2->canidmr6 = 0xFF; + can2->canidmr7 = 0xFF; + can2->canctl0 &= ~(0x01); /* leave init mode */ + can2->canctl0 &= ~(0x02); + + i = 0; + /* wait until init mode left */ + while ((can2->canctl1 & 0x01) || (can2->canctl1 & 0x02)) { + udelay(10); + i++; + if (i == 10) { + printf ("%s: CAN2 initialize error, " + "can not leave init/sleep mode!\n", + __FUNCTION__); + return 1; + } + } + init_done = 1; + } + return 0; +} + +/* + * Do CAN test + * by sending message between CAN1 and CAN2 + * + * return 1 on CAN failure + * return 0 if no failure + */ +int do_can(char *argv[]) +{ + int i; + struct mpc5xxx_mscan *can1 = + (struct mpc5xxx_mscan *)(CFG_MBAR + 0x0900); + struct mpc5xxx_mscan *can2 = + (struct mpc5xxx_mscan *)(CFG_MBAR + 0x0980); + + /* send a message on CAN1 */ + can1->cantbsel = 0x01; + can1->cantxfg.idr[0] = 0x55; + can1->cantxfg.idr[1] = 0x00; + can1->cantxfg.idr[1] &= ~0x8; + can1->cantxfg.idr[1] &= ~0x10; + can1->cantxfg.dsr[0] = 0xCC; + can1->cantxfg.dlr = 1; + can1->cantxfg.tbpr = 0; + can1->cantflg = 0x01; + + i = 0; + while ((can1->cantflg & 0x01) == 0) { + i++; + if (i == 10) { + printf ("%s: CAN1 send timeout, " + "can not send message!\n", + __FUNCTION__); + return 1; + } + udelay(1000); + } + udelay(1000); + + i = 0; + while (!(can2->canrflg & 0x01)) { + i++; + if (i == 10) { + printf ("%s: CAN2 receive timeout, " + "no message received!\n", + __FUNCTION__); + return 1; + } + udelay(1000); + } + + if (can2->canrxfg.dsr[0] != 0xCC) { + printf ("%s: CAN2 receive error, " + "data mismatch!\n", + __FUNCTION__); + return 1; + } + + /* send a message on CAN2 */ + can2->cantbsel = 0x01; + can2->cantxfg.idr[0] = 0x55; + can2->cantxfg.idr[1] = 0x00; + can2->cantxfg.idr[1] &= ~0x8; + can2->cantxfg.idr[1] &= ~0x10; + can2->cantxfg.dsr[0] = 0xCC; + can2->cantxfg.dlr = 1; + can2->cantxfg.tbpr = 0; + can2->cantflg = 0x01; + + i = 0; + while ((can2->cantflg & 0x01) == 0) { + i++; + if (i == 10) { + printf ("%s: CAN2 send error, " + "can not send message!\n", + __FUNCTION__); + return 1; + } + udelay(1000); + } + udelay(1000); + + i = 0; + while (!(can1->canrflg & 0x01)) { + i++; + if (i == 10) { + printf ("%s: CAN1 receive timeout, " + "no message received!\n", + __FUNCTION__); + return 1; + } + udelay(1000); + } + + if (can1->canrxfg.dsr[0] != 0xCC) { + printf ("%s: CAN1 receive error 0x%02x\n", + __FUNCTION__, (can1->canrxfg.dsr[0])); + return 1; + } + + return 0; +} +#endif /* CONFIG_BC3450_CAN */ + +/* + * test - BC3450 HW test routines + */ +int cmd_test(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ +#ifdef CONFIG_BC3450_CAN + int rcode; + can_init(); +#endif /* CONFIG_BC3450_CAN */ + + sm501_gpio_init(); + + if (argc != 2) { + printf ("Usage:%s\n", cmdtp->help); + return 1; + } + + if (strncmp (argv[1], "unit-off", 8) == 0) { + printf ("waiting 2 seconds...\n"); + udelay(2000000); + *(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_HIGH) &= ~PWR_OFF; + return 0; + } +#ifdef CONFIG_BC3450_CAN + else if (strncmp (argv[1], "can", 2) == 0) { + rcode = do_can (argv); + if (simple_strtoul(argv[2], NULL, 10) == 2) { + if (rcode == 0) + printf ("OK\n"); + else + printf ("Error\n"); + } + return rcode; + } +#endif /* CONFIG_BC3450_CAN */ + + printf ("Usage:%s\n", cmdtp->help); + return 1; +} + +U_BOOT_CMD( + test , 2, 1, cmd_test, + "test - unit test routines\n", + "\n" +#ifdef CONFIG_BC3450_CAN + "test can\n" + " - connect CAN1 (X8) with CAN2 (X9) for this test\n" +#endif /* CONFIG_BC3450_CAN */ + "test unit-off\n" + " - turns off the BC3450 unit\n" + " WARNING: Unsaved environment variables will be lost!\n" + ); +#endif /* CFG_CMD_BSP */ diff --git a/board/bc3450/config.mk b/board/bc3450/config.mk new file mode 100644 index 0000000000..47e9955789 --- /dev/null +++ b/board/bc3450/config.mk @@ -0,0 +1,41 @@ +# +# (C) Copyright 2004 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +# +# BC3450 board: +# +# Valid values for TEXT_BASE are: +# +# 0xFC000000 boot low (standard configuration with room for max 64 MByte +# Flash ROM) +# 0x00100000 boot from RAM (for testing only) +# + +ifndef TEXT_BASE +## Standard: boot low +TEXT_BASE = 0xFC000000 +## For testing: boot from RAM +# TEXT_BASE = 0x00100000 +endif + +PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board diff --git a/board/bc3450/mt48lc16m16a2-75.h b/board/bc3450/mt48lc16m16a2-75.h new file mode 100644 index 0000000000..3f1e1691bb --- /dev/null +++ b/board/bc3450/mt48lc16m16a2-75.h @@ -0,0 +1,47 @@ +/* + * (C) Copyright 2004 + * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#define SDRAM_DDR 0 /* is SDR */ + +#if defined(CONFIG_MPC5200) +/* Settings for XLB = 132 MHz */ +#define SDRAM_MODE 0x00CD0000 +/* #define SDRAM_MODE 0x008D0000 */ /* CAS latency 2 */ +#define SDRAM_CONTROL 0x504F0000 +#define SDRAM_CONFIG1 0xD2322800 +/* #define SDRAM_CONFIG1 0xD2222800 */ /* CAS latency 2 */ +/*#define SDRAM_CONFIG1 0xD7322800 */ /* SDRAM controller bug workaround */ +#define SDRAM_CONFIG2 0x8AD70000 +/*#define SDRAM_CONFIG2 0xDDD70000 */ /* SDRAM controller bug workaround */ + +#elif defined(CONFIG_MGT5100) +/* Settings for XLB = 66 MHz */ +#define SDRAM_MODE 0x008D0000 +#define SDRAM_CONTROL 0x504F0000 +#define SDRAM_CONFIG1 0xC2222600 +#define SDRAM_CONFIG2 0x88B70004 +#define SDRAM_ADDRSEL 0x02000000 + +#else +#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined +#endif diff --git a/board/bc3450/u-boot.lds b/board/bc3450/u-boot.lds new file mode 100644 index 0000000000..93b98a8f5c --- /dev/null +++ b/board/bc3450/u-boot.lds @@ -0,0 +1,124 @@ +/* + * (C) Copyright 2003-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + cpu/mpc5xxx/start.o (.text) + *(.text) + *(.fixup) + *(.got1) + . = ALIGN(16); + *(.rodata) + *(.rodata1) + *(.rodata.str1.4) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x0FFF) & 0xFFFFF000; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2; + __fixup_entries = (. - _FIXUP_TABLE_) >> 2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(4096); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(4096); + __init_end = .; + + __bss_start = .; + .bss : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } + _end = . ; + PROVIDE (end = .); +} diff --git a/include/configs/BC3450.h b/include/configs/BC3450.h new file mode 100644 index 0000000000..a79de4094e --- /dev/null +++ b/include/configs/BC3450.h @@ -0,0 +1,568 @@ +/* + * -- Version 1.1 -- + * + * (C) Copyright 2003-2005 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2004-2005 + * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de + * + * (C) Copyright 2005 + * Stefan Strobl, GERSYS GmbH, stefan.strobl@gersys.de. + * + * History: + * 1.1 - add define CONFIG_ZERO_BOOTDELAY_CHECK + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + */ +#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ +#define CONFIG_MPC5200 1 /* (more precisely a MPC5200 CPU) */ +#define CONFIG_TQM5200 1 /* ... on a TQM5200 module */ + +#define CONFIG_BC3450 1 /* ... on a BC3450 mainboard */ +#define CONFIG_BC3450_PS2 1 /* + a PS/2 converter onboard */ +#define CONFIG_BC3450_IDE 1 /* + IDE drives (Compact Flash) */ +#define CONFIG_BC3450_USB 1 /* + USB support */ +# define CONFIG_FAT 1 /* + FAT support */ +# define CONFIG_EXT2 1 /* + EXT2 support */ +#undef CONFIG_BC3450_BUZZER /* + Buzzer onboard */ +#undef CONFIG_BC3450_CAN /* + CAN transceiver */ +#undef CONFIG_BC3450_DS1340 /* + a RTC DS1340 onboard */ +#undef CONFIG_BC3450_DS3231 /* + a RTC DS3231 onboard tbd */ +#undef CONFIG_BC3450_AC97 /* + AC97 on PSC2, tbd */ +#define CONFIG_BC3450_FP 1 /* + enable FP O/P */ +#undef CONFIG_BC3450_CRT /* + enable CRT O/P (Debug only!) */ + +#define CFG_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */ + +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + +/* + * Serial console configuration + */ +#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ +#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } + +/* + * AT-PS/2 Multiplexer + */ +#ifdef CONFIG_BC3450_PS2 +# define CONFIG_PS2KBD /* AT-PS/2 Keyboard */ +# define CONFIG_PS2MULT /* .. on PS/2 Multiplexer */ +# define CONFIG_PS2SERIAL 6 /* .. on PSC6 */ +# define CONFIG_PS2MULT_DELAY (CFG_HZ/2) /* Initial delay */ +# define CONFIG_BOARD_EARLY_INIT_R +#endif /* CONFIG_BC3450_PS2 */ + +/* + * PCI Mapping: + * 0x40000000 - 0x4fffffff - PCI Memory + * 0x50000000 - 0x50ffffff - PCI IO Space + */ +# define CONFIG_PCI 1 +# define CONFIG_PCI_PNP 1 +/* #define CONFIG_PCI_SCAN_SHOW 1 */ + +#define CONFIG_PCI_MEM_BUS 0x40000000 +#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS +#define CONFIG_PCI_MEM_SIZE 0x10000000 + +#define CONFIG_PCI_IO_BUS 0x50000000 +#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS +#define CONFIG_PCI_IO_SIZE 0x01000000 + +#define CONFIG_NET_MULTI 1 +/*#define CONFIG_EEPRO100 XXX - FIXME: conflicts when CONFIG_MII is enabled */ +#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ +#define CONFIG_NS8382X 1 + +#ifdef CONFIG_PCI +# define ADD_PCI_CMD CFG_CMD_PCI +#else +# define ADD_PCI_CMD 0 +#endif + +/* + * Video console + */ +# define CONFIG_VIDEO +# define CONFIG_VIDEO_SM501 +# define CONFIG_VIDEO_SM501_32BPP +# define CONFIG_CFB_CONSOLE +# define CONFIG_VIDEO_LOGO +# define CONFIG_VGA_AS_SINGLE_DEVICE +# define CONFIG_CONSOLE_EXTRA_INFO /* display Board/Device-Infos */ +# define CONFIG_VIDEO_SW_CURSOR +# define CONFIG_SPLASH_SCREEN +# define CFG_CONSOLE_IS_IN_ENV + +#ifdef CONFIG_VIDEO +# define ADD_BMP_CMD CFG_CMD_BMP +#else +# define ADD_BMP_CMD 0 +#endif + +/* + * Partitions + */ +#define CONFIG_MAC_PARTITION +#define CONFIG_DOS_PARTITION +#define CONFIG_ISO_PARTITION + +/* + * USB + */ +#ifdef CONFIG_BC3450_USB +# define CONFIG_USB_OHCI +# define ADD_USB_CMD CFG_CMD_USB +# define CONFIG_USB_STORAGE +#else /* !CONFIG_BC3450_USB */ +# define ADD_USB_CMD 0 +#endif /* CONFIG_BC3450_USB */ + +/* + * POST support + */ +#define CONFIG_POST (CFG_POST_MEMORY | \ + CFG_POST_CPU | \ + CFG_POST_I2C) + +#ifdef CONFIG_POST +# define CFG_CMD_POST_DIAG CFG_CMD_DIAG +/* preserve space for the post_word at end of on-chip SRAM */ +# define MPC5XXX_SRAM_POST_SIZE MPC5XXX_SRAM_SIZE-4 +#else +# define CFG_CMD_POST_DIAG 0 +#endif /* CONFIG_POST */ + +/* + * IDE + */ +#ifdef CONFIG_BC3450_IDE +# define ADD_IDE_CMD CFG_CMD_IDE +#else +# define ADD_IDE_CMD 0 +#endif /* CONFIG_BC3450_IDE */ + +/* + * Filesystem support + */ +#if defined (CONFIG_BC3450_IDE) || defined (CONFIG_BC3450_USB) +#ifdef CONFIG_FAT +# define ADD_FAT_CMD CFG_CMD_FAT +#else +# define ADD_FAT_CMD 0 +#endif /* CONFIG_FAT */ + +#ifdef CONFIG_EXT2 +# define ADD_EXT2_CMD CFG_CMD_EXT2 +#else +# define ADD_EXT2_CMD 0 +#endif /* CONFIG_EXT2 */ +#endif /* CONFIG_BC3450_IDE / _USB */ + +/* + * Supported commands + */ +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ + ADD_BMP_CMD | \ + ADD_IDE_CMD | \ + ADD_FAT_CMD | \ + ADD_EXT2_CMD | \ + ADD_PCI_CMD | \ + ADD_USB_CMD | \ + CFG_CMD_ASKENV | \ + CFG_CMD_DATE | \ + CFG_CMD_DHCP | \ + CFG_CMD_ECHO | \ + CFG_CMD_EEPROM | \ + CFG_CMD_I2C | \ + CFG_CMD_JFFS2 | \ + CFG_CMD_MII | \ + CFG_CMD_NFS | \ + CFG_CMD_PING | \ + CFG_CMD_POST_DIAG | \ + CFG_CMD_REGINFO | \ + CFG_CMD_SNTP | \ + CFG_CMD_BSP) + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include + +#define CONFIG_TIMESTAMP /* display image timestamps */ + +#if (TEXT_BASE == 0xFC000000) /* Boot low */ +# define CFG_LOWBOOT 1 +#endif + +/* + * Autobooting + */ +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ +#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ + +#define CONFIG_PREBOOT "echo;" \ + "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ + "echo;" + +#undef CONFIG_BOOTARGS + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "ipaddr=192.168.1.10\0" \ + "serverip=192.168.1.3\0" \ + "netmask=255.255.255.0\0" \ + "hostname=bc3450\0" \ + "rootpath=/opt/eldk/ppc_6xx\0" \ + "kernel_addr=fc0a0000\0" \ + "ramdisk_addr=fc1c0000\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$(serverip):$(rootpath)\0" \ + "ideargs=setenv bootargs root=/dev/hda2 ro\0" \ + "addip=setenv bootargs $(bootargs) " \ + "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)" \ + ":$(hostname):$(netdev):off panic=1\0" \ + "addcons=setenv bootargs $(bootargs) " \ + "console=ttyS0,$(baudrate) console=tty0\0" \ + "flash_self=run ramargs addip addcons;" \ + "bootm $(kernel_addr) $(ramdisk_addr)\0" \ + "flash_nfs=run nfsargs addip addcons; bootm $(kernel_addr)\0" \ + "net_nfs=tftp 200000 $(bootfile); " \ + "run nfsargs addip addcons; bootm\0" \ + "ide_nfs=run nfsargs addip addcons; " \ + "disk 200000 0:1; bootm\0" \ + "ide_ide=run ideargs addip addcons; " \ + "disk 200000 0:1; bootm\0" \ + "usb_self=run usbload; run ramargs addip addcons; " \ + "bootm 200000 400000\0" \ + "usbload=usb reset; usb scan; usbboot 200000 0:1; " \ + "usbboot 400000 0:2\0" \ + "bootfile=uImage\0" \ + "load=tftp 200000 $(u-boot)\0" \ + "u-boot=u-boot.bin\0" \ + "update=protect off FC000000 FC05FFFF;" \ + "erase FC000000 FC05FFFF;" \ + "cp.b 200000 FC000000 $(filesize);" \ + "protect on FC000000 FC05FFFF\0" \ + "" + +#define CONFIG_BOOTCOMMAND "run flash_self" + +/* + * IPB Bus clocking configuration. + */ +#define CFG_IPBSPEED_133 /* define for 133MHz speed */ + +/* + * PCI Bus clocking configuration + * + * Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if + * CFG_IPBSPEED_133 is defined. This is because a PCI Clock of 66 MHz yet + * hasn't been tested with a IPB Bus Clock of 66 MHz. + */ +#if defined(CFG_IPBSPEED_133) +# define CFG_PCISPEED_66 /* define for 66MHz speed */ +#endif + +/* + * I2C configuration + */ +#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ +#define CFG_I2C_MODULE 2 /* Select I2C module #2 */ + +/* + * I2C clock frequency + * + * Please notice, that the resulting clock frequency could differ from the + * configured value. This is because the I2C clock is derived from system + * clock over a frequency divider with only a few divider values. U-boot + * calculates the best approximation for CFG_I2C_SPEED. However the calculated + * approximation allways lies below the configured value, never above. + */ +#define CFG_I2C_SPEED 100000 /* 100 kHz */ +#define CFG_I2C_SLAVE 0x7F + +/* + * EEPROM configuration for I²C EEPROM M24C32 + * M24C64 should work also. For other EEPROMs config should be verified. + * + * The TQM5200 module may hold an EEPROM at address 0x50. + */ +#define CFG_I2C_EEPROM_ADDR 0x50 /* 1010000x (TQM) */ +#define CFG_I2C_EEPROM_ADDR_LEN 2 +#define CFG_EEPROM_PAGE_WRITE_BITS 5 /* =32 Bytes per write */ +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 70 + +/* + * RTC configuration + */ +#if defined (CONFIG_BC3450_DS1340) && !defined (CONFIG_BC3450_DS3231) +# define CONFIG_RTC_M41T11 1 +# define CFG_I2C_RTC_ADDR 0x68 +#else +# define CONFIG_RTC_MPC5200 1 /* use MPC5200 internal RTC */ +# define CONFIG_BOARD_EARLY_INIT_R +#endif + +/* + * Flash configuration + */ +#define CFG_FLASH_BASE TEXT_BASE /* 0xFC000000 */ + +/* use CFI flash driver if no module variant is spezified */ +#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */ +#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */ +#define CFG_FLASH_BANKS_LIST { CFG_BOOTCS_START } +#define CFG_FLASH_EMPTY_INFO +#define CFG_FLASH_SIZE 0x04000000 /* 64 MByte */ +#define CFG_MAX_FLASH_SECT 512 /* max num of sects on one chip */ +#undef CFG_FLASH_USE_BUFFER_WRITE /* not supported yet for AMD */ + +#if !defined(CFG_LOWBOOT) +#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x00760000 + 0x00800000) +#else /* CFG_LOWBOOT */ +#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x00060000) +#endif /* CFG_LOWBOOT */ +#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks + (= chip selects) */ +#define CFG_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */ + +/* Dynamic MTD partition support */ +#define CONFIG_JFFS2_CMDLINE +#define MTDIDS_DEFAULT "nor0=TQM5200-0" +#define MTDPARTS_DEFAULT "mtdparts=TQM5200-0:640k(firmware)," \ + "1408k(kernel)," \ + "2m(initrd)," \ + "4m(small-fs)," \ + "16m(big-fs)," \ + "8m(misc)" + +/* + * Environment settings + */ +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_SIZE 0x10000 +#define CFG_ENV_SECT_SIZE 0x20000 +#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR + CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) + +/* + * Memory map + */ +#define CFG_MBAR 0xF0000000 +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_DEFAULT_MBAR 0x80000000 + +/* Use ON-Chip SRAM until RAM will be available */ +#define CFG_INIT_RAM_ADDR MPC5XXX_SRAM +#ifdef CONFIG_POST +/* preserve space for the post_word at end of on-chip SRAM */ +# define CFG_INIT_RAM_END MPC5XXX_SRAM_POST_SIZE +#else +# define CFG_INIT_RAM_END MPC5XXX_SRAM_SIZE +#endif /*CONFIG_POST*/ + +#define CFG_GBL_DATA_SIZE 128 /* Bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +#define CFG_MONITOR_BASE TEXT_BASE +#if (CFG_MONITOR_BASE < CFG_FLASH_BASE) +# define CFG_RAMBOOT 1 +#endif + +#define CFG_MONITOR_LEN (384 << 10) /* Reserve 384 kB for Monitor */ +#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/* + * Ethernet configuration + * + * Define CONFIG_FEC10MBIT to force FEC at 10MBIT + */ +#define CONFIG_MPC5xxx_FEC 1 +#undef CONFIG_FEC_10MBIT +#define CONFIG_PHY_ADDR 0x00 + +/* + * GPIO configuration on BC3450 + * + * PSC1: UART1 (Service-UART) [0x xxxxxxx4] + * PSC2: UART2 [0x xxxxxx4x] + * or: AC/97 if CONFIG_BC3450_AC97 [0x xxxxxx2x] + * PSC3: USB2 [0x xxxxx1xx] + * USB: UART4(ext.)/UART5(int.) [0x xxxx2xxx] + * (this has to match + * CONFIG_USB_CONFIG which is + * used by usb_ohci.c to set + * the USB ports) + * Eth: 10/100Mbit Ethernet [0x xxx0xxxx] + * (this is reset to '5' + * in FEC driver: fec.c) + * PSC6: UART6 (int. to PS/2 contr.) [0x xx5xxxxx] + * ATA/CS: ??? [0x x1xxxxxx] + * FIXME! UM Fig 2-10 suggests [0x x0xxxxxx] + * CS1: Use Pin gpio_wkup_6 as second + * SDRAM chip select (mem_cs1) + * Timer: CAN2 / SPI + * I2C: CAN1 / I²C2 [0x bxxxxxxx] + */ +#ifdef CONFIG_BC3450_AC97 +# define CFG_GPS_PORT_CONFIG 0xb1502124 +#else /* PSC2=UART2 */ +# define CFG_GPS_PORT_CONFIG 0xb1502144 +#endif + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max no of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Arg. Buffer Size */ + +#define CFG_ALT_MEMTEST /* Enable an alternative, */ + /* more extensive mem test */ + +#define CFG_MEMTEST_START 0x00100000 /* memtest works on */ +#define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ + +#define CFG_LOAD_ADDR 0x100000 /* default load address */ + +#define CFG_HZ 1000 /* dec freq: 1ms ticks */ + +/* + * Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined, + * which is normally part of the default commands (CFV_CMD_DFL) + */ +#define CONFIG_LOOPW + +/* + * Various low-level settings + */ +#if defined(CONFIG_MPC5200) +# define CFG_HID0_INIT HID0_ICE | HID0_ICFI +# define CFG_HID0_FINAL HID0_ICE +#else +# define CFG_HID0_INIT 0 +# define CFG_HID0_FINAL 0 +#endif + +#define CFG_BOOTCS_START CFG_FLASH_BASE +#define CFG_BOOTCS_SIZE CFG_FLASH_SIZE +#ifdef CFG_PCISPEED_66 +# define CFG_BOOTCS_CFG 0x0008DF30 /* for pci_clk = 66 MHz */ +#else +# define CFG_BOOTCS_CFG 0x0004DF30 /* for pci_clk = 33 MHz */ +#endif +#define CFG_CS0_START CFG_FLASH_BASE +#define CFG_CS0_SIZE CFG_FLASH_SIZE + +/* automatic configuration of chip selects */ +#ifdef CONFIG_TQM5200 +# define CONFIG_LAST_STAGE_INIT +#endif /* CONFIG_TQM5200 */ + +/* + * SRAM - Do not map below 2 GB in address space, because this area is used + * for SDRAM autosizing. + */ +#ifdef CONFIG_TQM5200 +# define CFG_CS2_START 0xE5000000 +# define CFG_CS2_SIZE 0x100000 /* 1 MByte */ +# define CFG_CS2_CFG 0x0004D930 +#endif /* CONFIG_TQM5200 */ + +/* + * Grafic controller - Do not map below 2 GB in address space, because this + * area is used for SDRAM autosizing. + */ +#ifdef CONFIG_TQM5200 +# define SM501_FB_BASE 0xE0000000 +# define CFG_CS1_START (SM501_FB_BASE) +# define CFG_CS1_SIZE 0x4000000 /* 64 MByte */ +# define CFG_CS1_CFG 0x8F48FF70 +# define SM501_MMIO_BASE CFG_CS1_START + 0x03E00000 +#endif /* CONFIG_TQM5200 */ + +#define CFG_CS_BURST 0x00000000 +#define CFG_CS_DEADCYCLE 0x33333311 /* 1 dead cycle for */ + /* flash and SM501 */ + +#define CFG_RESET_ADDRESS 0xff000000 + +/* + * USB stuff + */ +#define CONFIG_USB_CLOCK 0x0001BBBB +#define CONFIG_USB_CONFIG 0x00002000 /* we're using Port 2 */ + +/* + * IDE/ATA stuff Supports IDE harddisk + */ +#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */ + +#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ +#undef CONFIG_IDE_LED /* LED for ide not supported */ + +#define CONFIG_IDE_RESET /* reset for ide supported */ +#define CONFIG_IDE_PREINIT + +#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */ +#define CFG_IDE_MAXDEVICE 2 /* max. 2 drives per IDE bus */ + +#define CFG_ATA_IDE0_OFFSET 0x0000 + +#define CFG_ATA_BASE_ADDR MPC5XXX_ATA + +/* Offset for data I/O */ +#define CFG_ATA_DATA_OFFSET (0x0060) + +/* Offset for normal register accesses */ +#define CFG_ATA_REG_OFFSET (CFG_ATA_DATA_OFFSET) + +/* Offset for alternate registers */ +#define CFG_ATA_ALT_OFFSET (0x005C) + +/* Interval between registers */ +#define CFG_ATA_STRIDE 4 + +#endif /* __CONFIG_H */ -- 2.39.5