From 6cb142fa3b732a2cea257ca39ef4a7dbe81a32e1 Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Sun, 12 Mar 2006 02:12:27 +0100 Subject: [PATCH] Add missing Blackfin files. --- blackfin_config.mk | 24 + board/ezkit533/Makefile | 44 + board/ezkit533/config.mk | 26 + board/ezkit533/ezkit533.c | 71 ++ board/ezkit533/flash-defines.h | 130 +++ board/ezkit533/flash.c | 476 ++++++++ board/ezkit533/psd4256.h | 68 ++ board/ezkit533/u-boot.lds | 149 +++ board/stamp/Makefile | 68 ++ board/stamp/config.mk | 26 + board/stamp/stamp.c | 278 +++++ board/stamp/stamp.h | 57 + board/stamp/u-boot.lds | 148 +++ cpu/bf533/Makefile | 46 + cpu/bf533/bf533_serial.h | 78 ++ cpu/bf533/cache.S | 125 +++ cpu/bf533/config.mk | 27 + cpu/bf533/cplbhdlr.S | 194 ++++ cpu/bf533/cplbmgr.S | 601 ++++++++++ cpu/bf533/cpu.c | 194 ++++ cpu/bf533/cpu.h | 65 ++ cpu/bf533/flush.S | 402 +++++++ cpu/bf533/interrupt.S | 391 +++++++ cpu/bf533/interrupts.c | 165 +++ cpu/bf533/ints.c | 107 ++ cpu/bf533/serial.c | 194 ++++ cpu/bf533/start.S | 435 ++++++++ cpu/bf533/start1.S | 38 + cpu/bf533/traps.c | 73 ++ include/asm-blackfin/bitops.h | 380 +++++++ include/asm-blackfin/blackfin.h | 46 + include/asm-blackfin/blackfin_defs.h | 83 ++ include/asm-blackfin/byteorder.h | 40 + include/asm-blackfin/cplb.h | 48 + include/asm-blackfin/cplbtab.h | 572 ++++++++++ include/asm-blackfin/cpu/bf533_irq.h | 137 +++ include/asm-blackfin/cpu/bf533_rtc.h | 46 + include/asm-blackfin/cpu/bf533_serial.h | 79 ++ include/asm-blackfin/cpu/cdefBF531.h | 24 + include/asm-blackfin/cpu/cdefBF532.h | 398 +++++++ include/asm-blackfin/cpu/cdefBF533.h | 24 + include/asm-blackfin/cpu/cdefBF53x.h | 32 + include/asm-blackfin/cpu/cdef_LPBlackfin.h | 185 ++++ include/asm-blackfin/cpu/defBF531.h | 24 + include/asm-blackfin/cpu/defBF532.h | 1159 ++++++++++++++++++++ include/asm-blackfin/cpu/defBF533.h | 24 + include/asm-blackfin/cpu/defBF533_extn.h | 76 ++ include/asm-blackfin/cpu/def_LPBlackfin.h | 445 ++++++++ include/asm-blackfin/current.h | 40 + include/asm-blackfin/delay.h | 55 + include/asm-blackfin/entry.h | 385 +++++++ include/asm-blackfin/errno.h | 156 +++ include/asm-blackfin/global_data.h | 64 ++ include/asm-blackfin/hw_irq.h | 37 + include/asm-blackfin/io-kernel.h | 135 +++ include/asm-blackfin/io.h | 122 +++ include/asm-blackfin/irq.h | 142 +++ include/asm-blackfin/linkage.h | 60 + include/asm-blackfin/machdep.h | 89 ++ include/asm-blackfin/mem_init.h | 287 +++++ include/asm-blackfin/page.h | 128 +++ include/asm-blackfin/page_offset.h | 35 + include/asm-blackfin/posix_types.h | 90 ++ include/asm-blackfin/processor.h | 174 +++ include/asm-blackfin/ptrace.h | 269 +++++ include/asm-blackfin/segment.h | 46 + include/asm-blackfin/setup.h | 86 ++ include/asm-blackfin/shared_resources.h | 33 + include/asm-blackfin/string.h | 79 ++ include/asm-blackfin/system.h | 182 +++ include/asm-blackfin/traps.h | 86 ++ include/asm-blackfin/types.h | 83 ++ include/asm-blackfin/u-boot.h | 47 + include/asm-blackfin/uaccess.h | 207 ++++ include/asm-blackfin/virtconvert.h | 47 + include/configs/ezkit533.h | 188 ++++ include/configs/stamp.h | 340 ++++++ lib_blackfin/Makefile | 47 + lib_blackfin/bf533_linux.c | 91 ++ lib_blackfin/bf533_string.c | 185 ++++ lib_blackfin/blackfin_board.h | 62 ++ lib_blackfin/board.c | 282 +++++ lib_blackfin/cache.c | 41 + lib_blackfin/muldi3.c | 92 ++ rtc/bf533_rtc.c | 143 +++ 85 files changed, 13157 insertions(+) create mode 100644 blackfin_config.mk create mode 100644 board/ezkit533/Makefile create mode 100644 board/ezkit533/config.mk create mode 100644 board/ezkit533/ezkit533.c create mode 100644 board/ezkit533/flash-defines.h create mode 100644 board/ezkit533/flash.c create mode 100644 board/ezkit533/psd4256.h create mode 100644 board/ezkit533/u-boot.lds create mode 100644 board/stamp/Makefile create mode 100644 board/stamp/config.mk create mode 100644 board/stamp/stamp.c create mode 100644 board/stamp/stamp.h create mode 100644 board/stamp/u-boot.lds create mode 100644 cpu/bf533/Makefile create mode 100644 cpu/bf533/bf533_serial.h create mode 100644 cpu/bf533/cache.S create mode 100644 cpu/bf533/config.mk create mode 100644 cpu/bf533/cplbhdlr.S create mode 100644 cpu/bf533/cplbmgr.S create mode 100644 cpu/bf533/cpu.c create mode 100644 cpu/bf533/cpu.h create mode 100644 cpu/bf533/flush.S create mode 100644 cpu/bf533/interrupt.S create mode 100644 cpu/bf533/interrupts.c create mode 100644 cpu/bf533/ints.c create mode 100644 cpu/bf533/serial.c create mode 100644 cpu/bf533/start.S create mode 100644 cpu/bf533/start1.S create mode 100644 cpu/bf533/traps.c create mode 100644 include/asm-blackfin/bitops.h create mode 100644 include/asm-blackfin/blackfin.h create mode 100644 include/asm-blackfin/blackfin_defs.h create mode 100644 include/asm-blackfin/byteorder.h create mode 100644 include/asm-blackfin/cplb.h create mode 100644 include/asm-blackfin/cplbtab.h create mode 100644 include/asm-blackfin/cpu/bf533_irq.h create mode 100644 include/asm-blackfin/cpu/bf533_rtc.h create mode 100644 include/asm-blackfin/cpu/bf533_serial.h create mode 100644 include/asm-blackfin/cpu/cdefBF531.h create mode 100644 include/asm-blackfin/cpu/cdefBF532.h create mode 100644 include/asm-blackfin/cpu/cdefBF533.h create mode 100644 include/asm-blackfin/cpu/cdefBF53x.h create mode 100644 include/asm-blackfin/cpu/cdef_LPBlackfin.h create mode 100644 include/asm-blackfin/cpu/defBF531.h create mode 100644 include/asm-blackfin/cpu/defBF532.h create mode 100644 include/asm-blackfin/cpu/defBF533.h create mode 100644 include/asm-blackfin/cpu/defBF533_extn.h create mode 100644 include/asm-blackfin/cpu/def_LPBlackfin.h create mode 100644 include/asm-blackfin/current.h create mode 100644 include/asm-blackfin/delay.h create mode 100644 include/asm-blackfin/entry.h create mode 100644 include/asm-blackfin/errno.h create mode 100644 include/asm-blackfin/global_data.h create mode 100644 include/asm-blackfin/hw_irq.h create mode 100644 include/asm-blackfin/io-kernel.h create mode 100644 include/asm-blackfin/io.h create mode 100644 include/asm-blackfin/irq.h create mode 100644 include/asm-blackfin/linkage.h create mode 100644 include/asm-blackfin/machdep.h create mode 100644 include/asm-blackfin/mem_init.h create mode 100644 include/asm-blackfin/page.h create mode 100644 include/asm-blackfin/page_offset.h create mode 100644 include/asm-blackfin/posix_types.h create mode 100644 include/asm-blackfin/processor.h create mode 100644 include/asm-blackfin/ptrace.h create mode 100644 include/asm-blackfin/segment.h create mode 100644 include/asm-blackfin/setup.h create mode 100644 include/asm-blackfin/shared_resources.h create mode 100644 include/asm-blackfin/string.h create mode 100644 include/asm-blackfin/system.h create mode 100644 include/asm-blackfin/traps.h create mode 100644 include/asm-blackfin/types.h create mode 100644 include/asm-blackfin/u-boot.h create mode 100644 include/asm-blackfin/uaccess.h create mode 100644 include/asm-blackfin/virtconvert.h create mode 100644 include/configs/ezkit533.h create mode 100644 include/configs/stamp.h create mode 100644 lib_blackfin/Makefile create mode 100644 lib_blackfin/bf533_linux.c create mode 100644 lib_blackfin/bf533_string.c create mode 100644 lib_blackfin/blackfin_board.h create mode 100644 lib_blackfin/board.c create mode 100644 lib_blackfin/cache.c create mode 100644 lib_blackfin/muldi3.c create mode 100644 rtc/bf533_rtc.c diff --git a/blackfin_config.mk b/blackfin_config.mk new file mode 100644 index 0000000000..e2747aafe9 --- /dev/null +++ b/blackfin_config.mk @@ -0,0 +1,24 @@ +# +# (C) Copyright 2000-2002 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +PLATFORM_CPPFLAGS += -DCONFIG_BLACKFIN -D__blackfin__ diff --git a/board/ezkit533/Makefile b/board/ezkit533/Makefile new file mode 100644 index 0000000000..c9b3c9280f --- /dev/null +++ b/board/ezkit533/Makefile @@ -0,0 +1,44 @@ +# +# U-boot - Makefile +# +# Copyright (c) 2005 blackfin.uclinux.org +# +# (C) Copyright 2000-2004 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +OBJS = $(BOARD).o flash.o ezkit533.o + +$(LIB): .depend $(OBJS) + $(AR) crv $@ $(OBJS) + +######################################################################### + +.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ + +sinclude .depend + +######################################################################### diff --git a/board/ezkit533/config.mk b/board/ezkit533/config.mk new file mode 100644 index 0000000000..e4c089d23e --- /dev/null +++ b/board/ezkit533/config.mk @@ -0,0 +1,26 @@ +# +# (C) Copyright 2001 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +TEXT_BASE = 0x01FC0000 +PLATFORM_CPPFLAGS += -I$(TOPDIR) + diff --git a/board/ezkit533/ezkit533.c b/board/ezkit533/ezkit533.c new file mode 100644 index 0000000000..f8ee9003ad --- /dev/null +++ b/board/ezkit533/ezkit533.c @@ -0,0 +1,71 @@ +/* + * U-boot - ezkit533.c + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#if defined(CONFIG_MISC_INIT_R) +#include "psd4256.h" +#endif + +int checkboard(void) +{ + printf("CPU: ADSP BF533 Rev.: 0.%d\n", *pCHIPID >> 28); + printf("Board: ADI BF533 EZ-Kit Lite board\n"); + printf(" Support: http://blackfin.uclinux.org/\n"); + printf(" Richard Klingler \n"); + return 0; +} + +long int initdram(int board_type) +{ + DECLARE_GLOBAL_DATA_PTR; +#ifdef DEBUG + int brate; + char *tmp = getenv("baudrate"); + brate = simple_strtoul(tmp, NULL, 16); + printf("Serial Port initialized with Baud rate = %x\n",brate); + printf("SDRAM attributes:\n"); + printf("tRCD %d SCLK Cycles,tRP %d SCLK Cycles,tRAS %d SCLK Cycles" + "tWR %d SCLK Cycles,CAS Latency %d SCLK cycles \n", + 3, 3, 6, 2, 3); + printf("SDRAM Begin: 0x%x\n", CFG_SDRAM_BASE); + printf("Bank size = %d MB\n", CFG_MAX_RAM_SIZE >> 20); +#endif + gd->bd->bi_memstart = CFG_SDRAM_BASE; + gd->bd->bi_memsize = CFG_MAX_RAM_SIZE; + return CFG_MAX_RAM_SIZE; +} + +#if defined(CONFIG_MISC_INIT_R) +/* miscellaneous platform dependent initialisations */ +int misc_init_r(void) +{ + /* Set direction bits for Video en/decoder reset as output */ + *(volatile unsigned char *)(CFG_FLASH1_BASE + PSD_PORTA_DIR) = PSDA_VDEC_RST | PSDA_VENC_RST; + /* Deactivate Video en/decoder reset lines */ + *(volatile unsigned char *)(CFG_FLASH1_BASE + PSD_PORTA_DOUT) = PSDA_VDEC_RST | PSDA_VENC_RST; +} +#endif diff --git a/board/ezkit533/flash-defines.h b/board/ezkit533/flash-defines.h new file mode 100644 index 0000000000..8f9dff5de8 --- /dev/null +++ b/board/ezkit533/flash-defines.h @@ -0,0 +1,130 @@ +/* + * U-boot - flash-defines.h + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __FLASHDEFINES_H__ +#define __FLASHDEFINES_H__ + +#include + +#define V_ULONG(a) (*(volatile unsigned long *)( a )) +#define V_BYTE(a) (*(volatile unsigned char *)( a )) +#define TRUE 0x1 +#define FALSE 0x0 +#define BUFFER_SIZE 0x80000 +#define NO_COMMAND 0 +#define GET_CODES 1 +#define RESET 2 +#define WRITE 3 +#define FILL 4 +#define ERASE_ALL 5 +#define ERASE_SECT 6 +#define READ 7 +#define GET_SECTNUM 8 +#define FLASH_START_L 0x0000 +#define FLASH_START_H 0x2000 +#define FLASH_TOT_SECT 40 +#define FLASH_SIZE 0x220000 +#define FLASH_MAN_ST 2 +#define CFG_FLASH0_BASE 0x20000000 +#define RESET_VAL 0xF0 + + +asm("#define FLASH_START_L 0x0000"); +asm("#define FLASH_START_H 0x2000"); + +flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; + +int get_codes(void); +int poll_toggle_bit(long lOffset); +void reset_flash(void); +int erase_flash(void); +int erase_block_flash(int,unsigned long); +void unlock_flash(long lOffset); +int write_data(long lStart, long lCount, long lStride, int *pnData); +int FillData(long lStart, long lCount, long lStride, int *pnData); +int read_data(long lStart, long lCount, long lStride, int *pnData); +int read_flash(long nOffset, int *pnValue); +int write_flash(long nOffset, int nValue); +void get_sector_number(long lOffset, int *pnSector); +int GetSectorProtectionStatus(flash_info_t * info, int nSector); +int GetOffset(int nBlock); +int AFP_NumSectors = 40; +long AFP_SectorSize1 = 0x10000; +int AFP_SectorSize2 = 0x4000; + +#define WRITESEQ1 0x0AAA +#define WRITESEQ2 0x0554 +#define WRITESEQ3 0x0AAA +#define WRITESEQ4 0x0AAA +#define WRITESEQ5 0x0554 +#define WRITESEQ6 0x0AAA +#define WRITEDATA1 0xaa +#define WRITEDATA2 0x55 +#define WRITEDATA3 0x80 +#define WRITEDATA4 0xaa +#define WRITEDATA5 0x55 +#define WRITEDATA6 0x10 +#define PriFlashABegin 0 +#define SecFlashABegin 32 +#define SecFlashBBegin 36 +#define PriFlashAOff 0x0 +#define PriFlashBOff 0x100000 +#define SecFlashAOff 0x200000 +#define SecFlashBOff 0x280000 +#define INVALIDLOCNSTART 0x20270000 +#define INVALIDLOCNEND 0x20280000 +#define BlockEraseVal 0x30 +#define UNLOCKDATA1 0xaa +#define UNLOCKDATA2 0x55 +#define UNLOCKDATA3 0xa0 +#define GETCODEDATA1 0xaa +#define GETCODEDATA2 0x55 +#define GETCODEDATA3 0x90 +#define SecFlashASec1Off 0x200000 +#define SecFlashASec2Off 0x204000 +#define SecFlashASec3Off 0x206000 +#define SecFlashASec4Off 0x208000 +#define SecFlashAEndOff 0x210000 +#define SecFlashBSec1Off 0x280000 +#define SecFlashBSec2Off 0x284000 +#define SecFlashBSec3Off 0x286000 +#define SecFlashBSec4Off 0x288000 +#define SecFlashBEndOff 0x290000 + +#define SECT32 32 +#define SECT33 33 +#define SECT34 34 +#define SECT35 35 +#define SECT36 36 +#define SECT37 37 +#define SECT38 38 +#define SECT39 39 + +#define FLASH_SUCCESS 0 +#define FLASH_FAIL -1 + +#endif diff --git a/board/ezkit533/flash.c b/board/ezkit533/flash.c new file mode 100644 index 0000000000..0b59232644 --- /dev/null +++ b/board/ezkit533/flash.c @@ -0,0 +1,476 @@ +/* + * U-boot - flash.c Flash driver for PSD4256GV + * + * Copyright (c) 2005 blackfin.uclinux.org + * This file is based on BF533EzFlash.c originally written by Analog Devices, Inc. + * + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include "flash-defines.h" + +void flash_reset(void) +{ + reset_flash(); +} + +unsigned long flash_get_size(ulong baseaddr, flash_info_t * info, + int bank_flag) +{ + int id = 0, i = 0; + static int FlagDev = 1; + + id = get_codes(); + if(FlagDev) { +#ifdef DEBUG + printf("Device ID of the Flash is %x\n", id); +#endif + FlagDev = 0; + } + info->flash_id = id; + + switch (bank_flag) { + case 0: + for (i = PriFlashABegin; i < SecFlashABegin; i++) + info->start[i] = (baseaddr + (i * AFP_SectorSize1)); + info->size = 0x200000; + info->sector_count = 32; + break; + case 1: + info->start[0] = baseaddr + SecFlashASec1Off; + info->start[1] = baseaddr + SecFlashASec2Off; + info->start[2] = baseaddr + SecFlashASec3Off; + info->start[3] = baseaddr + SecFlashASec4Off; + info->size = 0x10000; + info->sector_count = 4; + break; + case 2: + info->start[0] = baseaddr + SecFlashBSec1Off; + info->start[1] = baseaddr + SecFlashBSec2Off; + info->start[2] = baseaddr + SecFlashBSec3Off; + info->start[3] = baseaddr + SecFlashBSec4Off; + info->size = 0x10000; + info->sector_count = 4; + break; + } + return (info->size); +} + +unsigned long flash_init(void) +{ + unsigned long size_b0, size_b1, size_b2; + int i; + + size_b0 = size_b1 = size_b2 = 0; +#ifdef DEBUG + printf("Flash Memory Start 0x%x\n", CFG_FLASH_BASE); + printf("Memory Map for the Flash\n"); + printf("0x20000000 - 0x200FFFFF Flash A Primary (1MB)\n"); + printf("0x20100000 - 0x201FFFFF Flash B Primary (1MB)\n"); + printf("0x20200000 - 0x2020FFFF Flash A Secondary (64KB)\n"); + printf("0x20280000 - 0x2028FFFF Flash B Secondary (64KB)\n"); + printf("Please type command flinfo for information on Sectors \n"); +#endif + for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) { + flash_info[i].flash_id = FLASH_UNKNOWN; + } + + size_b0 = flash_get_size(CFG_FLASH0_BASE, &flash_info[0], 0); + size_b1 = flash_get_size(CFG_FLASH0_BASE, &flash_info[1], 1); + size_b2 = flash_get_size(CFG_FLASH0_BASE, &flash_info[2], 2); + + if (flash_info[0].flash_id == FLASH_UNKNOWN || size_b0 == 0) { + printf("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n", + size_b0, size_b0 >> 20); + } + + (void)flash_protect(FLAG_PROTECT_SET,CFG_FLASH0_BASE,(flash_info[0].start[2] - 1),&flash_info[0]); + + return (size_b0 + size_b1 + size_b2); +} + +void flash_print_info(flash_info_t * info) +{ + int i; + + if (info->flash_id == FLASH_UNKNOWN) { + printf("missing or unknown FLASH type\n"); + return; + } + + switch (info->flash_id) { + case FLASH_PSD4256GV: + printf("ST Microelectronics "); + break; + default: + printf("Unknown Vendor "); + break; + } + for (i = 0; i < info->sector_count; ++i) { + if ((i % 5) == 0) + printf("\n "); + printf(" %08lX%s", + info->start[i], + info->protect[i] ? " (RO)" : " "); + } + printf("\n"); + return; +} + +int flash_erase(flash_info_t * info, int s_first, int s_last) +{ + int cnt = 0,i; + int prot,sect; + + prot = 0; + for (sect = s_first; sect <= s_last; ++sect) { + if (info->protect[sect]) + prot++; + } + + if (prot) + printf ("- Warning: %d protected sectors will not be erased!\n", prot); + else + printf ("\n"); + + cnt = s_last - s_first + 1; + + if (cnt == FLASH_TOT_SECT) { + printf("Erasing flash, Please Wait \n"); + if(erase_flash() < 0) { + printf("Erasing flash failed \n"); + return FLASH_FAIL; + } + } else { + printf("Erasing Flash locations, Please Wait\n"); + for (i = s_first; i <= s_last; i++) { + if (info->protect[i] == 0) { /* not protected */ + if(erase_block_flash(i, info->start[i]) < 0) { + printf("Error Sector erasing \n"); + return FLASH_FAIL; + } + } + } + } + return FLASH_SUCCESS; +} + +int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt) +{ + int ret; + + ret = write_data(addr, cnt, 1, (int *) src); + if(ret == FLASH_FAIL) + return ERR_NOT_ERASED; + return FLASH_SUCCESS; +} + + +int write_data(long lStart, long lCount, long lStride, int *pnData) +{ + long i = 0; + int j = 0; + unsigned long ulOffset = lStart - CFG_FLASH_BASE; + int d; + int iShift = 0; + int iNumWords = 2; + int nLeftover = lCount % 4; + int nSector = 0; + + for (i = 0; (i < lCount / 4) && (i < BUFFER_SIZE); i++) { + for (iShift = 0, j = 0; (j < iNumWords); + j++, ulOffset += (lStride * 2)) { + if ((ulOffset >= INVALIDLOCNSTART) + && (ulOffset < INVALIDLOCNEND)) { + printf("Invalid locations, Try writing to another location \n"); + return FLASH_FAIL; + } + get_sector_number(ulOffset, &nSector); + read_flash(ulOffset,&d); + if(d != 0xffff) { + printf("Flash not erased at offset 0x%x Please erase to reprogram \n",ulOffset); + return FLASH_FAIL; + } + unlock_flash(ulOffset); + if(write_flash(ulOffset, (pnData[i] >> iShift)) < 0) { + printf("Error programming the flash \n"); + return FLASH_FAIL; + } + iShift += 16; + } + } + if (nLeftover > 0) { + if ((ulOffset >= INVALIDLOCNSTART) + && (ulOffset < INVALIDLOCNEND)) + return FLASH_FAIL; + get_sector_number(ulOffset, &nSector); + read_flash(ulOffset,&d); + if(d != 0xffff) { + printf("Flash already programmed. Please erase to reprogram \n"); + printf("uloffset = 0x%x \t d = 0x%x\n",ulOffset,d); + return FLASH_FAIL; + } + unlock_flash(ulOffset); + if(write_flash(ulOffset, pnData[i]) < 0) { + printf("Error programming the flash \n"); + return FLASH_FAIL; + } + } + return FLASH_SUCCESS; +} + +int read_data(long ulStart, long lCount, long lStride, int *pnData) +{ + long i = 0; + int j = 0; + long ulOffset = ulStart; + int iShift = 0; + int iNumWords = 2; + int nLeftover = lCount % 4; + int nHi, nLow; + int nSector = 0; + + for (i = 0; (i < lCount / 4) && (i < BUFFER_SIZE); i++) { + for (iShift = 0, j = 0; j < iNumWords; j += 2) { + if ((ulOffset >= INVALIDLOCNSTART) + && (ulOffset < INVALIDLOCNEND)) + return FLASH_FAIL; + + get_sector_number(ulOffset, &nSector); + read_flash(ulOffset, &nLow); + ulOffset += (lStride * 2); + read_flash(ulOffset, &nHi); + ulOffset += (lStride * 2); + pnData[i] = (nHi << 16) | nLow; + } + } + if (nLeftover > 0) { + if ((ulOffset >= INVALIDLOCNSTART) + && (ulOffset < INVALIDLOCNEND)) + return FLASH_FAIL; + + get_sector_number(ulOffset, &nSector); + read_flash(ulOffset, &pnData[i]); + } + return FLASH_SUCCESS; +} + +int write_flash(long nOffset, int nValue) +{ + long addr; + + addr = (CFG_FLASH_BASE + nOffset); + asm("ssync;"); + *(unsigned volatile short *) addr = nValue; + asm("ssync;"); + if(poll_toggle_bit(nOffset) < 0) + return FLASH_FAIL; + return FLASH_SUCCESS; +} + +int read_flash(long nOffset, int *pnValue) +{ + int nValue = 0x0; + long addr = (CFG_FLASH_BASE + nOffset); + + if (nOffset != 0x2) + reset_flash(); + asm("ssync;"); + nValue = *(volatile unsigned short *) addr; + asm("ssync;"); + *pnValue = nValue; + return TRUE; +} + +int poll_toggle_bit(long lOffset) +{ + unsigned int u1,u2; + unsigned long timeout = 0xFFFFFFFF; + volatile unsigned long *FB = (volatile unsigned long *)(0x20000000 + lOffset); + while(1) { + if(timeout < 0) + break; + u1 = *(volatile unsigned short *)FB; + u2 = *(volatile unsigned short *)FB; + if((u1 & 0x0040) == (u2 & 0x0040)) + return FLASH_SUCCESS; + if((u2 & 0x0020) == 0x0000) + continue; + u1 = *(volatile unsigned short *)FB; + if((u2 & 0x0040) == (u1 & 0x0040)) + return FLASH_SUCCESS; + else { + reset_flash(); + return FLASH_FAIL; + } + timeout--; + } + printf("Time out occured \n"); + if(timeout <0) return FLASH_FAIL; +} + +void reset_flash(void) +{ + write_flash(WRITESEQ1, RESET_VAL); + /* Wait for 10 micro seconds */ + udelay(10); +} + +int erase_flash(void) +{ + write_flash(WRITESEQ1, WRITEDATA1); + write_flash(WRITESEQ2, WRITEDATA2); + write_flash(WRITESEQ3, WRITEDATA3); + write_flash(WRITESEQ4, WRITEDATA4); + write_flash(WRITESEQ5, WRITEDATA5); + write_flash(WRITESEQ6, WRITEDATA6); + + if(poll_toggle_bit(0x0000) < 0) + return FLASH_FAIL; + + write_flash(SecFlashAOff + WRITESEQ1, WRITEDATA1); + write_flash(SecFlashAOff + WRITESEQ2, WRITEDATA2); + write_flash(SecFlashAOff + WRITESEQ3, WRITEDATA3); + write_flash(SecFlashAOff + WRITESEQ4, WRITEDATA4); + write_flash(SecFlashAOff + WRITESEQ5, WRITEDATA5); + write_flash(SecFlashAOff + WRITESEQ6, WRITEDATA6); + + if(poll_toggle_bit(SecFlashASec1Off) < 0) + return FLASH_FAIL; + + write_flash(PriFlashBOff + WRITESEQ1, WRITEDATA1); + write_flash(PriFlashBOff + WRITESEQ2, WRITEDATA2); + write_flash(PriFlashBOff + WRITESEQ3, WRITEDATA3); + write_flash(PriFlashBOff + WRITESEQ4, WRITEDATA4); + write_flash(PriFlashBOff + WRITESEQ5, WRITEDATA5); + write_flash(PriFlashBOff + WRITESEQ6, WRITEDATA6); + + if(poll_toggle_bit(PriFlashBOff) <0) + return FLASH_FAIL; + + write_flash(SecFlashBOff + WRITESEQ1, WRITEDATA1); + write_flash(SecFlashBOff + WRITESEQ2, WRITEDATA2); + write_flash(SecFlashBOff + WRITESEQ3, WRITEDATA3); + write_flash(SecFlashBOff + WRITESEQ4, WRITEDATA4); + write_flash(SecFlashBOff + WRITESEQ5, WRITEDATA5); + write_flash(SecFlashBOff + WRITESEQ6, WRITEDATA6); + + if(poll_toggle_bit(SecFlashBOff) < 0) + return FLASH_FAIL; + + return FLASH_SUCCESS; +} + +int erase_block_flash(int nBlock, unsigned long address) +{ + long ulSectorOff = 0x0; + + if ((nBlock < 0) || (nBlock > AFP_NumSectors)) + return FALSE; + + ulSectorOff = (address - CFG_FLASH_BASE); + + write_flash((WRITESEQ1 | ulSectorOff), WRITEDATA1); + write_flash((WRITESEQ2 | ulSectorOff), WRITEDATA2); + write_flash((WRITESEQ3 | ulSectorOff), WRITEDATA3); + write_flash((WRITESEQ4 | ulSectorOff), WRITEDATA4); + write_flash((WRITESEQ5 | ulSectorOff), WRITEDATA5); + + write_flash(ulSectorOff, BlockEraseVal); + + if(poll_toggle_bit(ulSectorOff) < 0) + return FLASH_FAIL; + + return FLASH_SUCCESS; +} + +void unlock_flash(long ulOffset) +{ + unsigned long ulOffsetAddr = ulOffset; + ulOffsetAddr &= 0xFFFF0000; + + write_flash((WRITESEQ1 | ulOffsetAddr), UNLOCKDATA1); + write_flash((WRITESEQ2 | ulOffsetAddr), UNLOCKDATA2); + write_flash((WRITESEQ3 | ulOffsetAddr), UNLOCKDATA3); +} + +int get_codes() +{ + int dev_id = 0; + + write_flash(WRITESEQ1, GETCODEDATA1); + write_flash(WRITESEQ2, GETCODEDATA2); + write_flash(WRITESEQ3, GETCODEDATA3); + + read_flash(0x0002, &dev_id); + dev_id &= 0x00FF; + + reset_flash(); + + return dev_id; +} + +void get_sector_number(long ulOffset, int *pnSector) +{ + int nSector = 0; + + if (ulOffset >= SecFlashAOff) { + if ((ulOffset < SecFlashASec1Off) + && (ulOffset < SecFlashASec2Off)) { + nSector = SECT32; + } else if ((ulOffset >= SecFlashASec2Off) + && (ulOffset < SecFlashASec3Off)) { + nSector = SECT33; + } else if ((ulOffset >= SecFlashASec3Off) + && (ulOffset < SecFlashASec4Off)) { + nSector = SECT34; + } else if ((ulOffset >= SecFlashASec4Off) + && (ulOffset < SecFlashAEndOff)) { + nSector = SECT35; + } + } else if (ulOffset >= SecFlashBOff) { + if ((ulOffset < SecFlashBSec1Off) + && (ulOffset < SecFlashBSec2Off)) { + nSector = SECT36; + } + if ((ulOffset < SecFlashBSec2Off) + && (ulOffset < SecFlashBSec3Off)) { + nSector = SECT37; + } + if ((ulOffset < SecFlashBSec3Off) + && (ulOffset < SecFlashBSec4Off)) { + nSector = SECT38; + } + if ((ulOffset < SecFlashBSec4Off) + && (ulOffset < SecFlashBEndOff)) { + nSector = SECT39; + } + } else if ((ulOffset >= PriFlashAOff) && (ulOffset < SecFlashAOff)) { + nSector = ulOffset & 0xffff0000; + nSector = ulOffset >> 16; + nSector = nSector & 0x000ff; + } + + if ((nSector >= 0) && (nSector < AFP_NumSectors)) { + *pnSector = nSector; + } +} diff --git a/board/ezkit533/psd4256.h b/board/ezkit533/psd4256.h new file mode 100644 index 0000000000..9ae678babb --- /dev/null +++ b/board/ezkit533/psd4256.h @@ -0,0 +1,68 @@ +/* + * U-boot - psd4256.h + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * Flash A/B Port A configuration registers. + * Addresses are offset values to CFG_FLASH1_BASE + * for Flash A and CFG_FLASH2_BASE for Flash B. + */ + +#define PSD_PORTA_DIN 0x070000 +#define PSD_PORTA_DOUT 0x070004 +#define PSD_PORTA_DIR 0x070006 + +/* + * Flash A/B Port B configuration registers + * Addresses are offset values to CFG_FLASH1_BASE + * for Flash A and CFG_FLASH2_BASE for Flash B. + */ + +#define PSD_PORTB_DIN 0x070001 +#define PSD_PORTB_DOUT 0x070005 +#define PSD_PORTB_DIR 0x070007 + +/* + * Flash A Port A Bit definitions + */ + +#define PSDA_PPICLK1 0x20 /* PPI Clock select bit 1 */ +#define PSDA_PPICLK0 0x10 /* PPI Clock select bit 0 */ +#define PSDA_VDEC_RST 0x08 /* Video decoder reset, 0 = RESET */ +#define PSDA_VENC_RST 0x04 /* Video encoder reset, 0 = RESET */ +#define PSDA_CODEC_RST 0x01 /* Codec reset, 0 = RESET */ + +/* + * Flash A Port B Bit definitions + */ + +#define PSDA_LED9 0x20 /* LED 9, 1 = LED ON */ +#define PSDA_LED8 0x10 /* LED 8, 1 = LED ON */ +#define PSDA_LED7 0x08 /* LED 7, 1 = LED ON */ +#define PSDA_LED6 0x04 /* LED 6, 1 = LED ON */ +#define PSDA_LED5 0x02 /* LED 5, 1 = LED ON */ +#define PSDA_LED4 0x01 /* LED 4, 1 = LED ON */ + diff --git a/board/ezkit533/u-boot.lds b/board/ezkit533/u-boot.lds new file mode 100644 index 0000000000..f58b489d80 --- /dev/null +++ b/board/ezkit533/u-boot.lds @@ -0,0 +1,149 @@ +/* + * U-boot - u-boot.lds + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(bfin) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + /* WARNING - the following is hand-optimized to fit within */ + /* the sector before the environment sector. If it throws */ + /* an error during compilation remove an object here to get */ + /* it linked after the configuration sector. */ + + cpu/bf533/start.o (.text) + cpu/bf533/start1.o (.text) + cpu/bf533/traps.o (.text) + cpu/bf533/interrupt.o (.text) + cpu/bf533/serial.o (.text) + common/dlmalloc.o (.text) + lib_generic/vsprintf.o (.text) + lib_generic/crc32.o (.text) + lib_generic/zlib.o (.text) + board/ezkit533/ezkit533.o (.text) + + . = DEFINED(env_offset) ? env_offset : .; + common/environment.o (.text) + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + *(.rodata.str1.4) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } + _end = . ; + PROVIDE (end = .); +} + diff --git a/board/stamp/Makefile b/board/stamp/Makefile new file mode 100644 index 0000000000..ab97e1b484 --- /dev/null +++ b/board/stamp/Makefile @@ -0,0 +1,68 @@ +# +# U-boot - Makefile +# +# Copyright (c) 2005 blackfin.uclinux.org +# +# (C) Copyright 2000-2004 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +# +# (C) Copyright 2001 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +OBJS = $(BOARD).o stamp.o +SOBJS = + +$(LIB): .depend $(OBJS) + $(AR) crv $@ $(OBJS) + +######################################################################### + +.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ + +sinclude .depend + +######################################################################### diff --git a/board/stamp/config.mk b/board/stamp/config.mk new file mode 100644 index 0000000000..4ec82cb776 --- /dev/null +++ b/board/stamp/config.mk @@ -0,0 +1,26 @@ +# +# (C) Copyright 2001 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +TEXT_BASE = 0x07FC0000 +PLATFORM_CPPFLAGS += -I$(TOPDIR) + diff --git a/board/stamp/stamp.c b/board/stamp/stamp.c new file mode 100644 index 0000000000..8485f58c5c --- /dev/null +++ b/board/stamp/stamp.c @@ -0,0 +1,278 @@ +/* + * U-boot - stamp.c STAMP board specific routines + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include "stamp.h" + +#define STATUS_LED_OFF 0 +#define STATUS_LED_ON 1 + +#ifdef CONFIG_SHOW_BOOT_PROGRESS +# define SHOW_BOOT_PROGRESS(arg) show_boot_progress(arg) +#else +# define SHOW_BOOT_PROGRESS(arg) +#endif + +int checkboard(void) +{ + printf("CPU: ADSP BF533 Rev.: 0.%d\n", *pCHIPID >> 28); + printf("Board: ADI BF533 Stamp board\n"); + printf(" Support: http://blackfin.uclinux.org/\n"); + printf(" Richard Klingler \n"); + return 0; +} + +long int initdram(int board_type) +{ + DECLARE_GLOBAL_DATA_PTR; +#ifdef DEBUG + printf("SDRAM attributes:\n"); + printf(" tRCD:%d Cycles; tRP:%d Cycles; tRAS:%d Cycles; tWR:%d Cycles; " + "CAS Latency:%d cycles\n", (SDRAM_tRCD >> 15), (SDRAM_tRP >> 11), + (SDRAM_tRAS >> 6), ( SDRAM_tWR >> 19), (SDRAM_CL >> 2 )); + printf("SDRAM Begin: 0x%x\n", CFG_SDRAM_BASE); + printf("Bank size = %d MB\n", 128); +#endif + gd->bd->bi_memstart = CFG_SDRAM_BASE; + gd->bd->bi_memsize = CFG_MAX_RAM_SIZE; + return (gd->bd->bi_memsize); +} + +void swap_to(int device_id) +{ + + if (device_id == ETHERNET) + { + *pFIO_DIR = PF0; + asm("ssync;"); + *pFIO_FLAG_S = PF0; + asm("ssync;"); + } + else if (device_id == FLASH) + { + *pFIO_DIR = (PF4 | PF3 | PF2 | PF1 | PF0); + *pFIO_FLAG_S = (PF4 | PF3 | PF2 ); + *pFIO_MASKA_D = (PF8 | PF6 | PF5); + *pFIO_MASKB_D = (PF7); + *pFIO_POLAR = (PF8 | PF6 | PF5 ); + *pFIO_EDGE = (PF8 | PF7 | PF6 | PF5); + *pFIO_INEN = (PF8 | PF7 | PF6 | PF5); + *pFIO_FLAG_D = (PF4 | PF3 | PF2 ); + asm("ssync;"); + } + else { + printf("Unknown bank to switch\n"); + } + + return; +} + +#if defined(CONFIG_MISC_INIT_R) +/* miscellaneous platform dependent initialisations */ +int misc_init_r(void) +{ + int i; + int cf_stat = 0; + + /* Check whether CF card is inserted */ + *pFIO_EDGE = FIO_EDGE_CF_BITS; + *pFIO_POLAR = FIO_POLAR_CF_BITS; + for (i=0; i < 0x300 ; i++) asm("nop;"); + + if ( (*pFIO_FLAG_S) & CF_STAT_BITS) + { + cf_stat = 0; + } + else + { + cf_stat = 1; + } + + *pFIO_EDGE = FIO_EDGE_BITS; + *pFIO_POLAR = FIO_POLAR_BITS; + + + if (cf_stat) + { + printf ("Booting from COMPACT flash\n"); + + /* Set cycle time for CF */ + *(volatile unsigned long *) ambctl1 = CF_AMBCTL1VAL; + + for (i=0; i < 0x1000 ; i++) asm("nop;"); + for (i=0; i < 0x1000 ; i++) asm("nop;"); + for (i=0; i < 0x1000 ; i++) asm("nop;"); + + serial_setbrg(); + ide_init(); + + setenv ("bootargs", ""); + setenv ("bootcmd", "fatload ide 0:1 0x1000000 uImage-stamp;bootm 0x1000000;bootm 0x20100000" ); + } + else + { + printf ("Booting from FLASH\n"); + } + + return 1; +} +#endif + +#ifdef CONFIG_STAMP_CF + +void cf_outb(unsigned char val, volatile unsigned char* addr) +{ + /* + * Set PF1 PF0 respectively to 0 1 to divert address + * to the expansion memory banks + */ + *pFIO_FLAG_S = CF_PF0; + *pFIO_FLAG_C = CF_PF1; + asm("ssync;"); + + *(addr) = val; + asm("ssync;"); + + /* Setback PF1 PF0 to 0 0 to address external + * memory banks */ + *(volatile unsigned short *) pFIO_FLAG_C = CF_PF1_PF0; + asm("ssync;"); +} + +unsigned char cf_inb(volatile unsigned char *addr) +{ + volatile unsigned char c; + + *pFIO_FLAG_S = CF_PF0; + *pFIO_FLAG_C = CF_PF1; + asm("ssync;"); + + c = *(addr); + asm("ssync;"); + + *pFIO_FLAG_C = CF_PF1_PF0; + asm("ssync;"); + + return c; +} + +void cf_insw(unsigned short *sect_buf, unsigned short *addr, int words) +{ + int i; + + *pFIO_FLAG_S = CF_PF0; + *pFIO_FLAG_C = CF_PF1; + asm("ssync;"); + + for (i = 0;i < words; i++) + { + *(sect_buf + i) = *(addr); + asm("ssync;"); + } + + *pFIO_FLAG_C = CF_PF1_PF0; + asm("ssync;"); +} + +void cf_outsw(unsigned short *addr, unsigned short *sect_buf, int words) +{ + int i; + + *pFIO_FLAG_S = CF_PF0; + *pFIO_FLAG_C = CF_PF1; + asm("ssync;"); + + for (i = 0;i < words; i++) + { + *(addr) = *(sect_buf + i); + asm("ssync;"); + } + + *pFIO_FLAG_C = CF_PF1_PF0; + asm("ssync;"); +} +#endif + +void stamp_led_set(int LED1, int LED2, int LED3) +{ + *pFIO_INEN &= ~( PF2 | PF3 | PF4); + *pFIO_DIR |= ( PF2 | PF3 | PF4); + + if(LED1 == STATUS_LED_OFF) + *pFIO_FLAG_S = PF2; + else + *pFIO_FLAG_C = PF2; + if(LED2 == STATUS_LED_OFF) + *pFIO_FLAG_S = PF3; + else + *pFIO_FLAG_C = PF3; + if(LED3 == STATUS_LED_OFF) + *pFIO_FLAG_S = PF4; + else + *pFIO_FLAG_C = PF4; + asm("ssync;"); +} + +void show_boot_progress(int status) +{ + switch(status){ + case 1: + stamp_led_set(STATUS_LED_OFF,STATUS_LED_OFF,STATUS_LED_ON); + break; + case 2: + stamp_led_set(STATUS_LED_OFF,STATUS_LED_ON,STATUS_LED_OFF); + break; + case 3: + stamp_led_set(STATUS_LED_OFF,STATUS_LED_ON,STATUS_LED_ON); + break; + case 4: + stamp_led_set(STATUS_LED_ON,STATUS_LED_OFF,STATUS_LED_OFF); + break; + case 5: + case 6: + stamp_led_set(STATUS_LED_ON,STATUS_LED_OFF,STATUS_LED_ON); + break; + case 7: + case 8: + stamp_led_set(STATUS_LED_ON,STATUS_LED_ON,STATUS_LED_OFF); + break; + case 9: + case 10: + case 11: + case 12: + case 13: + case 14: + case 15: + stamp_led_set(STATUS_LED_OFF,STATUS_LED_OFF,STATUS_LED_OFF); + break; + default: + stamp_led_set(STATUS_LED_ON,STATUS_LED_ON,STATUS_LED_ON); + break; + } +} + diff --git a/board/stamp/stamp.h b/board/stamp/stamp.h new file mode 100644 index 0000000000..7bc33b4147 --- /dev/null +++ b/board/stamp/stamp.h @@ -0,0 +1,57 @@ +/* + * U-boot - stamp.h + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __STAMP_H__ +#define __STAMP_H__ + +extern void init_Flags(void); + +extern volatile unsigned long *ambctl0; +extern volatile unsigned long *ambctl1; +extern volatile unsigned long *amgctl; + +extern unsigned long pll_div_fact; +extern void serial_setbrg(void); +extern void pll_set(int vco, int crystal_frq, int pll_div); + +/* Definitions used in Compact Flash Boot support */ +#define FIO_EDGE_CF_BITS 0x0000 +#define FIO_POLAR_CF_BITS 0x0000 +#define FIO_EDGE_BITS 0x1E0 +#define FIO_POLAR_BITS 0x160 + +/* Compact flash status bits in status register */ +#define CF_STAT_BITS 0x00000060 + +/* CF Flags used to switch between expansion and external + * memory banks + */ +#define CF_PF0 0x0001 +#define CF_PF1 0x0002 +#define CF_PF1_PF0 0x0003 + +#endif diff --git a/board/stamp/u-boot.lds b/board/stamp/u-boot.lds new file mode 100644 index 0000000000..ad6886f8e1 --- /dev/null +++ b/board/stamp/u-boot.lds @@ -0,0 +1,148 @@ +/* + * U-boot - u-boot.lds + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(bfin) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + /* WARNING - the following is hand-optimized to fit within */ + /* the sector before the environment sector. If it throws */ + /* an error during compilation remove an object here to get */ + /* it linked after the configuration sector. */ + + cpu/bf533/start.o (.text) + cpu/bf533/start1.o (.text) + cpu/bf533/traps.o (.text) + cpu/bf533/interrupt.o (.text) + cpu/bf533/serial.o (.text) + common/dlmalloc.o (.text) + lib_generic/vsprintf.o (.text) + lib_generic/crc32.o (.text) + lib_generic/zlib.o (.text) + + . = DEFINED(env_offset) ? env_offset : .; + common/environment.o (.text) + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + *(.rodata.str1.4) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } + _end = . ; + PROVIDE (end = .); +} + diff --git a/cpu/bf533/Makefile b/cpu/bf533/Makefile new file mode 100644 index 0000000000..c63a8f6d01 --- /dev/null +++ b/cpu/bf533/Makefile @@ -0,0 +1,46 @@ +# U-boot - Makefile +# +# Copyright (c) 2005 blackfin.uclinux.org +# +# (C) Copyright 2000-2004 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = lib$(CPU).a + +START = start.o start1.o interrupt.o cache.o cplbhdlr.o cplbmgr.o flush.o +OBJS = cpu.o traps.o ints.o serial.o interrupts.o + +all: .depend $(START) $(LIB) + +$(LIB): $(OBJS) + $(AR) crv $@ $(OBJS) + +######################################################################### + +.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@ + +sinclude .depend + +######################################################################### diff --git a/cpu/bf533/bf533_serial.h b/cpu/bf533/bf533_serial.h new file mode 100644 index 0000000000..ec63a5e00a --- /dev/null +++ b/cpu/bf533/bf533_serial.h @@ -0,0 +1,78 @@ +/* + * U-boot - bf533_serial.h Serial Driver defines + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * This file is based on + * bf533_serial.h: Definitions for the BlackFin BF533 DSP serial driver. + * Copyright (C) 2003 Bas Vermeulen + * BuyWays B.V. (www.buyways.nl) + * + * Based heavily on: + * blkfinserial.h: Definitions for the BlackFin DSP serial driver. + * + * Copyright (C) 2001 Tony Z. Kou tonyko@arcturusnetworks.com + * Copyright (C) 2001 Arcturus Networks Inc. + * + * Based on code from 68328serial.c which was: + * Copyright (C) 1995 David S. Miller + * Copyright (C) 1998 Kenneth Albanowski + * Copyright (C) 1998, 1999 D. Jeff Dionne + * Copyright (C) 1999 Vladimir Gurevich + * + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _Bf533_SERIAL_H +#define _Bf533_SERIAL_H + +#include +#include + +#define SYNC_ALL __asm__ __volatile__ ("ssync;\n") +#define ACCESS_LATCH *pUART_LCR |= UART_LCR_DLAB; +#define ACCESS_PORT_IER *pUART_LCR &= (~UART_LCR_DLAB); + +void serial_setbrg(void); +static void local_put_char(char ch); +void calc_baud(void); +void serial_setbrg(void); +int serial_init(void); +void serial_putc(const char c); +int serial_tstc(void); +int serial_getc(void); +void serial_puts(const char *s); +static void local_put_char(char ch); + +extern int get_clock(void); +int baud_table[5] = {9600, 19200, 38400, 57600, 115200}; + +struct { + unsigned char dl_high; + unsigned char dl_low; +} hw_baud_table[5]; + +#ifdef CONFIG_STAMP +extern unsigned long pll_div_fact; +#endif + +#endif diff --git a/cpu/bf533/cache.S b/cpu/bf533/cache.S new file mode 100644 index 0000000000..1822d1f329 --- /dev/null +++ b/cpu/bf533/cache.S @@ -0,0 +1,125 @@ + + +#define ASSEMBLY +#include +#include + +.text +.align 2 +ENTRY(blackfin_icache_flush_range) + R2 = -32; + R2 = R0 & R2; + P0 = R2; + P1 = R1; + CSYNC; +1: + IFLUSH[P0++]; + CC = P0 < P1(iu); + IF CC JUMP 1b(bp); + IFLUSH[P0]; + SSYNC; + RTS; + +ENTRY(blackfin_dcache_flush_range) + R2 = -32; + R2 = R0 & R2; + P0 = R2; + P1 = R1; + CSYNC; +1: + FLUSH[P0++]; + CC = P0 < P1(iu); + IF CC JUMP 1b(bp); + FLUSH[P0]; + SSYNC; + RTS; + +ENTRY(_icache_invalidate) +ENTRY(invalidate_entire_icache) + [--SP] = ( R7:5); + + P0.L = (IMEM_CONTROL & 0xFFFF); + P0.H = (IMEM_CONTROL >> 16); + R7 = [P0]; + + /* Clear the IMC bit , All valid bits in the instruction + * cache are set to the invalid state + */ + BITCLR(R7,IMC_P); + CLI R6; + SSYNC; /* SSYNC required before invalidating cache. */ + .align 8; + [P0] = R7; + SSYNC; + STI R6; + + /* Configures the instruction cache agian */ + R6 = (IMC | ENICPLB); + R7 = R7 | R6; + + CLI R6; + SSYNC; /* SSYNC required before writing to IMEM_CONTROL. */ + .align 8; + [P0] = R7; + SSYNC; + STI R6; + + ( R7:5) = [SP++]; + RTS; + +/* Invalidate the Entire Data cache by + * clearing DMC[1:0] bits + */ +ENTRY(invalidate_entire_dcache) +ENTRY(_dcache_invalidate) + [--SP] = ( R7:6); + + P0.L = (DMEM_CONTROL & 0xFFFF); + P0.H = (DMEM_CONTROL >> 16); + R7 = [P0]; + + /* Clear the DMC[1:0] bits, All valid bits in the data + * cache are set to the invalid state + */ + BITCLR(R7,DMC0_P); + BITCLR(R7,DMC1_P); + CLI R6; + SSYNC; /* SSYNC required before writing to DMEM_CONTROL. */ + .align 8; + [P0] = R7; + SSYNC; + STI R6; + + /* Configures the data cache again */ + + R6 = (ACACHE_BCACHE | ENDCPLB | PORT_PREF0); + R7 = R7 | R6; + + CLI R6; + SSYNC; /* SSYNC required before writing to DMEM_CONTROL. */ + .align 8; + [P0] = R7; + SSYNC; + STI R6; + + ( R7:6) = [SP++]; + RTS; + +ENTRY(blackfin_dcache_invalidate_range) + R2 = -32; + R2 = R0 & R2; + P0 = R2; + P1 = R1; + CSYNC; +1: + FLUSHINV[P0++]; + CC = P0 < P1 (iu); + IF CC JUMP 1b (bp); + + /* If the data crosses a cache line, then we'll be pointing to + ** the last cache line, but won't have flushed/invalidated it yet, so do + ** one more. + */ + FLUSHINV[P0]; + SSYNC; + RTS; diff --git a/cpu/bf533/config.mk b/cpu/bf533/config.mk new file mode 100644 index 0000000000..a9d529ecd8 --- /dev/null +++ b/cpu/bf533/config.mk @@ -0,0 +1,27 @@ +# U-boot - config.mk +# +# Copyright (c) 2005 blackfin.uclinux.org +# +# (C) Copyright 2000-2004 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +PLATFORM_RELFLAGS += -ffixed-P5 diff --git a/cpu/bf533/cplbhdlr.S b/cpu/bf533/cplbhdlr.S new file mode 100644 index 0000000000..b5abbbcbb6 --- /dev/null +++ b/cpu/bf533/cplbhdlr.S @@ -0,0 +1,194 @@ +/* Copyright (C) 2003 Analog Devices, Inc. All Rights Reserved. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. + * + * Blackfin BF533/2.6 support : LG Soft India + */ + + +/* Include an exception handler to invoke the CPLB manager + */ + +#include +#include +#include + + +.text + +.globl _cplb_hdr; +.type _cplb_hdr, STT_FUNC; +.extern _cplb_mgr; +.type _cplb_mgr, STT_FUNC; +.extern __unknown_exception_occurred; +.type __unknown_exception_occurred, STT_FUNC; +.extern __cplb_miss_all_locked; +.type __cplb_miss_all_locked, STT_FUNC; +.extern __cplb_miss_without_replacement; +.type __cplb_miss_without_replacement, STT_FUNC; +.extern __cplb_protection_violation; +.type __cplb_protection_violation, STT_FUNC; +.extern panic_pv; + +.align 2; + +ENTRY(_cplb_hdr) + SSYNC; + [--SP] = ( R7:0, P5:0 ); + [--SP] = ASTAT; + [--SP] = SEQSTAT; + [--SP] = I0; + [--SP] = I1; + [--SP] = I2; + [--SP] = I3; + [--SP] = LT0; + [--SP] = LB0; + [--SP] = LC0; + [--SP] = LT1; + [--SP] = LB1; + [--SP] = LC1; + R2 = SEQSTAT; + + /*Mask the contents of SEQSTAT and leave only EXCAUSE in R2*/ + R2 <<= 26; + R2 >>= 26; + + R1 = 0x23; /* Data access CPLB protection violation */ + CC = R2 == R1; + IF !CC JUMP not_data_write; + R0 = 2; /* is a write to data space*/ + JUMP is_icplb_miss; + +not_data_write: + R1 = 0x2C; /* CPLB miss on an instruction fetch */ + CC = R2 == R1; + R0 = 0; /* is_data_miss == False*/ + IF CC JUMP is_icplb_miss; + + R1 = 0x26; + CC = R2 == R1; + IF !CC JUMP unknown; + + R0 = 1; /* is_data_miss == True*/ + +is_icplb_miss: + +#if ( defined (CONFIG_BLKFIN_CACHE) || defined (CONFIG_BLKFIN_DCACHE)) +#if ( defined (CONFIG_BLKFIN_CACHE) && !defined (CONFIG_BLKFIN_DCACHE)) + R1 = CPLB_ENABLE_ICACHE; +#endif +#if ( !defined (CONFIG_BLKFIN_CACHE) && defined (CONFIG_BLKFIN_DCACHE)) + R1 = CPLB_ENABLE_DCACHE; +#endif +#if ( defined (CONFIG_BLKFIN_CACHE) && defined (CONFIG_BLKFIN_DCACHE)) + R1 = CPLB_ENABLE_DCACHE | CPLB_ENABLE_ICACHE; +#endif +#else + R1 = 0; +#endif + + [--SP] = RETS; + CALL _cplb_mgr; + RETS = [SP++]; + CC = R0 == 0; + IF !CC JUMP not_replaced; + LC1 = [SP++]; + LB1 = [SP++]; + LT1 = [SP++]; + LC0 = [SP++]; + LB0 = [SP++]; + LT0 = [SP++]; + I3 = [SP++]; + I2 = [SP++]; + I1 = [SP++]; + I0 = [SP++]; + SEQSTAT = [SP++]; + ASTAT = [SP++]; + ( R7:0, P5:0 ) = [SP++]; + RTS; + +unknown: + [--SP] = RETS; + CALL __unknown_exception_occurred; + RETS = [SP++]; + JUMP unknown; +not_replaced: + CC = R0 == CPLB_NO_UNLOCKED; + IF !CC JUMP next_check; + [--SP] = RETS; + CALL __cplb_miss_all_locked; + RETS = [SP++]; +next_check: + CC = R0 == CPLB_NO_ADDR_MATCH; + IF !CC JUMP next_check2; + [--SP] = RETS; + CALL __cplb_miss_without_replacement; + RETS = [SP++]; + JUMP not_replaced; +next_check2: + CC = R0 == CPLB_PROT_VIOL; + IF !CC JUMP strange_return_from_cplb_mgr; + [--SP] = RETS; + CALL __cplb_protection_violation; + RETS = [SP++]; + JUMP not_replaced; +strange_return_from_cplb_mgr: + IDLE; + CSYNC; + JUMP strange_return_from_cplb_mgr; + +/************************************ + * Diagnostic exception handlers + */ + +__cplb_miss_all_locked: + sp += -12; + R0 = CPLB_NO_UNLOCKED; + call panic_bfin; + SP += 12; + RTS; + + __cplb_miss_without_replacement: + sp += -12; + R0 = CPLB_NO_ADDR_MATCH; + call panic_bfin; + SP += 12; + RTS; + +__cplb_protection_violation: + sp += -12; + R0 = CPLB_PROT_VIOL; + call panic_bfin; + SP += 12; + RTS; + +__unknown_exception_occurred: + + /* This function is invoked by the default exception + * handler, if it does not recognise the kind of + * exception that has occurred. In other words, the + * default handler only handles some of the system's + * exception types, and it does not expect any others + * to occur. If your application is going to be using + * other kinds of exceptions, you must replace the + * default handler with your own, that handles all the + * exceptions you will use. + * + * Since there's nothing we can do, we just loop here + * at what we hope is a suitably informative label. + */ + + IDLE; +do_not_know_what_to_do: + CSYNC; + JUMP __unknown_exception_occurred; + + RTS; +.__unknown_exception_occurred.end: +.global __unknown_exception_occurred; +.type __unknown_exception_occurred, STT_FUNC; + +panic_bfin: + RTS; + diff --git a/cpu/bf533/cplbmgr.S b/cpu/bf533/cplbmgr.S new file mode 100644 index 0000000000..fc3e3a8832 --- /dev/null +++ b/cpu/bf533/cplbmgr.S @@ -0,0 +1,601 @@ +/*This file is subject to the terms and conditions of the GNU General Public + * License. + * + * Blackfin BF533/2.6 support : LG Soft India + * Modification: Dec 07 2004 + * 1. Correction in icheck_lock. Valid lock entries were + * geting victimized, for instruction cplb replacement. + * 2. Setup loop's are modified as now toolchain support's P Indexed + * addressing + * :LG Soft India + * + */ + +/* Usage: int _cplb_mgr(is_data_miss,int enable_cache) + * is_data_miss==2 => Mark as Dirty, write to the clean data page + * is_data_miss==1 => Replace a data CPLB. + * is_data_miss==0 => Replace an instruction CPLB. + * + * Returns: + * CPLB_RELOADED => Successfully updated CPLB table. + * CPLB_NO_UNLOCKED => All CPLBs are locked, so cannot be evicted.This indicates + * that the CPLBs in the configuration tablei are badly + * configured, as this should never occur. + * CPLB_NO_ADDR_MATCH => The address being accessed, that triggered the exception, + * is not covered by any of the CPLBs in the configuration + * table. The application isi presumably misbehaving. + * CPLB_PROT_VIOL => The address being accessed, that triggered thei exception, + * was not a first-write to a clean Write Back Data page, + * and so presumably is a genuine violation of the page's + * protection attributes. The application is misbehaving. + */ +#define ASSEMBLY + +#include +#include +#include +#include + +.text + +.align 2; +ENTRY(_cplb_mgr) + + [--SP]=( R7:0,P5:0 ); + + CC = R0 == 2; + IF CC JUMP dcplb_write; + + CC = R0 == 0; + IF !CC JUMP dcplb_miss_compare; + + /* ICPLB Miss Exception. We need to choose one of the + * currently-installed CPLBs, and replace it with one + * from the configuration table. + */ + + P4.L = (ICPLB_FAULT_ADDR & 0xFFFF); + P4.H = (ICPLB_FAULT_ADDR >> 16); + + P1 = 16; + P5.L = page_size_table; + P5.H = page_size_table; + + P0.L = (ICPLB_DATA0 & 0xFFFF); + P0.H = (ICPLB_DATA0 >> 16); + R4 = [P4]; /* Get faulting address*/ + R6 = 64; /* Advance past the fault address, which*/ + R6 = R6 + R4; /* we'll use if we find a match*/ + R3 = ((16 << 8) | 2); /* Extract mask, bits 16 and 17.*/ + + R5 = 0; +isearch: + + R1 = [P0-0x100]; /* Address for this CPLB */ + + R0 = [P0++]; /* Info for this CPLB*/ + CC = BITTST(R0,0); /* Is the CPLB valid?*/ + IF !CC JUMP nomatch; /* Skip it, if not.*/ + CC = R4 < R1(IU); /* If fault address less than page start*/ + IF CC JUMP nomatch; /* then skip this one.*/ + R2 = EXTRACT(R0,R3.L) (Z); /* Get page size*/ + P1 = R2; + P1 = P5 + (P1<<2); /* index into page-size table*/ + R2 = [P1]; /* Get the page size*/ + R1 = R1 + R2; /* and add to page start, to get page end*/ + CC = R4 < R1(IU); /* and see whether fault addr is in page.*/ + IF !CC R4 = R6; /* If so, advance the address and finish loop.*/ + IF !CC JUMP isearch_done; +nomatch: + /* Go around again*/ + R5 += 1; + CC = BITTST(R5, 4); /* i.e CC = R5 >= 16*/ + IF !CC JUMP isearch; + +isearch_done: + I0 = R4; /* Fault address we'll search for*/ + + /* set up pointers */ + P0.L = (ICPLB_DATA0 & 0xFFFF); + P0.H = (ICPLB_DATA0 >> 16); + + /* The replacement procedure for ICPLBs */ + + P4.L = (IMEM_CONTROL & 0xFFFF); + P4.H = (IMEM_CONTROL >> 16); + + /* disable cplbs */ + R5 = [P4]; /* Control Register*/ + BITCLR(R5,ENICPLB_P); + CLI R1; + SSYNC; /* SSYNC required before writing to IMEM_CONTROL. */ + .align 8; + [P4] = R5; + SSYNC; + STI R1; + + R1 = -1; /* end point comparison */ + R3 = 16; /* counter */ + + /* Search through CPLBs for first non-locked entry */ + /* Overwrite it by moving everyone else up by 1 */ +icheck_lock: + R0 = [P0++]; + R3 = R3 + R1; + CC = R3 == R1; + IF CC JUMP all_locked; + CC = BITTST(R0, 0); /* an invalid entry is good */ + IF !CC JUMP ifound_victim; + CC = BITTST(R0,1); /* but a locked entry isn't */ + IF CC JUMP icheck_lock; + +ifound_victim: +#ifdef CONFIG_CPLB_INFO + R7 = [P0 - 0x104]; + P2.L = ipdt_table; + P2.H = ipdt_table; + P3.L = ipdt_swapcount_table; + P3.H = ipdt_swapcount_table; + P3 += -4; +icount: + R2 = [P2]; /* address from config table */ + P2 += 8; + P3 += 8; + CC = R2==-1; + IF CC JUMP icount_done; + CC = R7==R2; + IF !CC JUMP icount; + R7 = [P3]; + R7 += 1; + [P3] = R7; + CSYNC; +icount_done: +#endif + LC0=R3; + LSETUP(is_move,ie_move) LC0; +is_move: + R0 = [P0]; + [P0 - 4] = R0; + R0 = [P0 - 0x100]; + [P0-0x104] = R0; +ie_move:P0+=4; + + /* We've made space in the ICPLB table, so that ICPLB15 + * is now free to be overwritten. Next, we have to determine + * which CPLB we need to install, from the configuration + * table. This is a matter of getting the start-of-page + * addresses and page-lengths from the config table, and + * determining whether the fault address falls within that + * range. + */ + + P2.L = ipdt_table; + P2.H = ipdt_table; +#ifdef CONFIG_CPLB_INFO + P3.L = ipdt_swapcount_table; + P3.H = ipdt_swapcount_table; + P3 += -8; +#endif + P0.L = page_size_table; + P0.H = page_size_table; + + /* Retrieve our fault address (which may have been advanced + * because the faulting instruction crossed a page boundary). + */ + + R0 = I0; + + /* An extraction pattern, to get the page-size bits from + * the CPLB data entry. Bits 16-17, so two bits at posn 16. + */ + + R1 = ((16<<8)|2); +inext: R4 = [P2++]; /* address from config table */ + R2 = [P2++]; /* data from config table */ +#ifdef CONFIG_CPLB_INFO + P3 += 8; +#endif + + CC = R4 == -1; /* End of config table*/ + IF CC JUMP no_page_in_table; + + /* See if failed address > start address */ + CC = R4 <= R0(IU); + IF !CC JUMP inext; + + /* extract page size (17:16)*/ + R3 = EXTRACT(R2, R1.L) (Z); + + /* add page size to addr to get range */ + + P5 = R3; + P5 = P0 + (P5 << 2); /* scaled, for int access*/ + R3 = [P5]; + R3 = R3 + R4; + + /* See if failed address < (start address + page size) */ + CC = R0 < R3(IU); + IF !CC JUMP inext; + + /* We've found a CPLB in the config table that covers + * the faulting address, so install this CPLB into the + * last entry of the table. + */ + + P1.L = (ICPLB_DATA15 & 0xFFFF); /*ICPLB_DATA15*/ + P1.H = (ICPLB_DATA15 >> 16); + [P1] = R2; + [P1-0x100] = R4; +#ifdef CONFIG_CPLB_INFO + R3 = [P3]; + R3 += 1; + [P3] = R3; +#endif + + /* P4 points to IMEM_CONTROL, and R5 contains its old + * value, after we disabled ICPLBS. Re-enable them. + */ + + BITSET(R5,ENICPLB_P); + CLI R2; + SSYNC; /* SSYNC required before writing to IMEM_CONTROL. */ + .align 8; + [P4] = R5; + SSYNC; + STI R2; + + ( R7:0,P5:0 ) = [SP++]; + R0 = CPLB_RELOADED; + RTS; + +/* FAILED CASES*/ +no_page_in_table: + ( R7:0,P5:0 ) = [SP++]; + R0 = CPLB_NO_ADDR_MATCH; + RTS; +all_locked: + ( R7:0,P5:0 ) = [SP++]; + R0 = CPLB_NO_UNLOCKED; + RTS; +prot_violation: + ( R7:0,P5:0 ) = [SP++]; + R0 = CPLB_PROT_VIOL; + RTS; + +dcplb_write: + + /* if a DCPLB is marked as write-back (CPLB_WT==0), and + * it is clean (CPLB_DIRTY==0), then a write to the + * CPLB's page triggers a protection violation. We have to + * mark the CPLB as dirty, to indicate that there are + * pending writes associated with the CPLB. + */ + + P4.L = (DCPLB_STATUS & 0xFFFF); + P4.H = (DCPLB_STATUS >> 16); + P3.L = (DCPLB_DATA0 & 0xFFFF); + P3.H = (DCPLB_DATA0 >> 16); + R5 = [P4]; + + /* A protection violation can be caused by more than just writes + * to a clean WB page, so we have to ensure that: + * - It's a write + * - to a clean WB page + * - and is allowed in the mode the access occurred. + */ + + CC = BITTST(R5, 16); /* ensure it was a write*/ + IF !CC JUMP prot_violation; + + /* to check the rest, we have to retrieve the DCPLB.*/ + + /* The low half of DCPLB_STATUS is a bit mask*/ + + R2 = R5.L (Z); /* indicating which CPLB triggered the event.*/ + R3 = 30; /* so we can use this to determine the offset*/ + R2.L = SIGNBITS R2; + R2 = R2.L (Z); /* into the DCPLB table.*/ + R3 = R3 - R2; + P4 = R3; + P3 = P3 + (P4<<2); + R3 = [P3]; /* Retrieve the CPLB*/ + + /* Now we can check whether it's a clean WB page*/ + + CC = BITTST(R3, 14); /* 0==WB, 1==WT*/ + IF CC JUMP prot_violation; + CC = BITTST(R3, 7); /* 0 == clean, 1 == dirty*/ + IF CC JUMP prot_violation; + + /* Check whether the write is allowed in the mode that was active.*/ + + R2 = 1<<3; /* checking write in user mode*/ + CC = BITTST(R5, 17); /* 0==was user, 1==was super*/ + R5 = CC; + R2 <<= R5; /* if was super, check write in super mode*/ + R2 = R3 & R2; + CC = R2 == 0; + IF CC JUMP prot_violation; + + /* It's a genuine write-to-clean-page.*/ + + BITSET(R3, 7); /* mark as dirty*/ + [P3] = R3; /* and write back.*/ + CSYNC; + ( R7:0,P5:0 ) = [SP++]; + R0 = CPLB_RELOADED; + RTS; + +dcplb_miss_compare: + + /* Data CPLB Miss event. We need to choose a CPLB to + * evict, and then locate a new CPLB to install from the + * config table, that covers the faulting address. + */ + + P1.L = (DCPLB_DATA15 & 0xFFFF); + P1.H = (DCPLB_DATA15 >> 16); + + P4.L = (DCPLB_FAULT_ADDR & 0xFFFF); + P4.H = (DCPLB_FAULT_ADDR >> 16); + R4 = [P4]; + I0 = R4; + + /* The replacement procedure for DCPLBs*/ + + R6 = R1; /* Save for later*/ + + /* Turn off CPLBs while we work.*/ + P4.L = (DMEM_CONTROL & 0xFFFF); + P4.H = (DMEM_CONTROL >> 16); + R5 = [P4]; + BITCLR(R5,ENDCPLB_P); + CLI R0; + SSYNC; /* SSYNC required before writing to DMEM_CONTROL. */ + .align 8; + [P4] = R5; + SSYNC; + STI R0; + + /* Start looking for a CPLB to evict. Our order of preference + * is: invalid CPLBs, clean CPLBs, dirty CPLBs. Locked CPLBs + * are no good. + */ + + I1.L = (DCPLB_DATA0 & 0xFFFF); + I1.H = (DCPLB_DATA0 >> 16); + P1 = 3; + P2 = 16; + I2.L = dcplb_preference; + I2.H = dcplb_preference; + LSETUP(sdsearch1, edsearch1) LC0 = P1; +sdsearch1: + R0 = [I2++]; /* Get the bits we're interested in*/ + P0 = I1; /* Go back to start of table*/ + LSETUP (sdsearch2, edsearch2) LC1 = P2; +sdsearch2: + R1 = [P0++]; /* Fetch each installed CPLB in turn*/ + R2 = R1 & R0; /* and test for interesting bits.*/ + CC = R2 == 0; /* If none are set, it'll do.*/ + IF !CC JUMP skip_stack_check; + + R2 = [P0 - 0x104]; /* R2 - PageStart */ + P3.L = page_size_table; /* retrive end address */ + P3.H = page_size_table; /* retrive end address */ + R3 = 0x2; /* 0th - position, 2 bits -length */ + nop; /*Anamoly 05000209*/ + R7 = EXTRACT(R1,R3.l); + R7 = R7 << 2; /* Page size index offset */ + P5 = R7; + P3 = P3 + P5; + R7 = [P3]; /* page size in 1K bytes */ + + R7 = R7 << 0xA; /* in bytes * 1024*/ + R7 = R2 + R7; /* R7 - PageEnd */ + R4 = SP; /* Test SP is in range */ + + CC = R7 < R4; /* if PageEnd < SP */ + IF CC JUMP dfound_victim; + R3 = 0x284; /* stack length from start of trap till the point */ + /* 20 stack locations for future modifications */ + R4 = R4 + R3; + CC = R4 < R2; /* if SP + stacklen < PageStart */ + IF CC JUMP dfound_victim; +skip_stack_check: + +edsearch2: NOP; +edsearch1: NOP; + + /* If we got here, we didn't find a DCPLB we considered + * replacable, which means all of them were locked. + */ + + JUMP all_locked; +dfound_victim: + +#ifdef CONFIG_CPLB_INFO + R1 = [P0 - 0x104]; + P2.L = dpdt_table; + P2.H = dpdt_table; + P3.L = dpdt_swapcount_table; + P3.H = dpdt_swapcount_table; + P3 += -4; +dicount: + R2 = [P2]; + P2 += 8; + P3 += 8; + CC = R2==-1; + IF CC JUMP dicount_done; + CC = R1==R2; + IF !CC JUMP dicount; + R1 = [P3]; + R1 += 1; + [P3] = R1; + CSYNC; +dicount_done: +#endif + + /* Clean down the hardware loops*/ + R2 = 0; + LC1 = R2; + LC0 = R2; + + /* There's a suitable victim in [P0-4] (because we've + * advanced already). If it's a valid dirty write-back + * CPLB, we need to flush the pending writes first. + */ + + CC = BITTST(R1, 0); /* Is it valid?*/ + IF !CC JUMP Ddoverwrite;/* nope.*/ + CC = BITTST(R1, 7); /* Is it dirty?*/ + IF !CC JUMP Ddoverwrite (BP); /* Nope.*/ + CC = BITTST(R1, 14); /* Is it Write-Through?*/ + IF CC JUMP Ddoverwrite; /* Yep*/ + + /* This is a dirty page, so we need to flush all writes + * that are pending on the page. + */ + + /* Retrieve the page start address*/ + R0 = [P0 - 0x104]; + [--sp] = rets; + CALL dcplb_flush; /* R0==CPLB addr, R1==CPLB data*/ + rets = [sp++]; +Ddoverwrite: + + /* [P0-4] is a suitable victim CPLB, so we want to + * overwrite it by moving all the following CPLBs + * one space closer to the start. + */ + + R1.L = ((DCPLB_DATA15+4) & 0xFFFF); /*DCPLB_DATA15+4*/ + R1.H = ((DCPLB_DATA15+4) >> 16); + R0 = P0; + + /* If the victim happens to be in DCPLB15, + * we don't need to move anything. + */ + + CC = R1 == R0; + IF CC JUMP de_moved; + R1 = R1 - R0; + R1 >>= 2; + P1 = R1; + LSETUP(ds_move, de_move) LC0=P1; +ds_move: + R0 = [P0++]; /* move data */ + [P0 - 8] = R0; + R0 = [P0-0x104] /* move address */ +de_move: [P0-0x108] = R0; + + /* We've now made space in DCPLB15 for the new CPLB to be + * installed. The next stage is to locate a CPLB in the + * config table that covers the faulting address. + */ + +de_moved:NOP; + R0 = I0; /* Our faulting address */ + + P2.L = dpdt_table; + P2.H = dpdt_table; +#ifdef CONFIG_CPLB_INFO + P3.L = dpdt_swapcount_table; + P3.H = dpdt_swapcount_table; + P3 += -8; +#endif + + P1.L = page_size_table; + P1.H = page_size_table; + + /* An extraction pattern, to retrieve bits 17:16.*/ + + R1 = (16<<8)|2; +dnext: R4 = [P2++]; /* address */ + R2 = [P2++]; /* data */ +#ifdef CONFIG_CPLB_INFO + P3 += 8; +#endif + + CC = R4 == -1; + IF CC JUMP no_page_in_table; + + /* See if failed address > start address */ + CC = R4 <= R0(IU); + IF !CC JUMP dnext; + + /* extract page size (17:16)*/ + R3 = EXTRACT(R2, R1.L) (Z); + + /* add page size to addr to get range */ + + P5 = R3; + P5 = P1 + (P5 << 2); + R3 = [P5]; + R3 = R3 + R4; + + /* See if failed address < (start address + page size) */ + CC = R0 < R3(IU); + IF !CC JUMP dnext; + + /* We've found the CPLB that should be installed, so + * write it into CPLB15, masking off any caching bits + * if necessary. + */ + + P1.L = (DCPLB_DATA15 & 0xFFFF); + P1.H = (DCPLB_DATA15 >> 16); + + /* If the DCPLB has cache bits set, but caching hasn't + * been enabled, then we want to mask off the cache-in-L1 + * bit before installing. Moreover, if caching is off, we + * also want to ensure that the DCPLB has WT mode set, rather + * than WB, since WB pages still trigger first-write exceptions + * even when not caching is off, and the page isn't marked as + * cachable. Finally, we could mark the page as clean, not dirty, + * but we choose to leave that decision to the user; if the user + * chooses to have a CPLB pre-defined as dirty, then they always + * pay the cost of flushing during eviction, but don't pay the + * cost of first-write exceptions to mark the page as dirty. + */ + +#ifdef CONFIG_BLKFIN_WT + BITSET(R6, 14); /* Set WT*/ +#endif + + [P1] = R2; + [P1-0x100] = R4; +#ifdef CONFIG_CPLB_INFO + R3 = [P3]; + R3 += 1; + [P3] = R3; +#endif + + /* We've installed the CPLB, so re-enable CPLBs. P4 + * points to DMEM_CONTROL, and R5 is the value we + * last wrote to it, when we were disabling CPLBs. + */ + + BITSET(R5,ENDCPLB_P); + CLI R2; + .align 8; + [P4] = R5; + SSYNC; + STI R2; + + ( R7:0,P5:0 ) = [SP++]; + R0 = CPLB_RELOADED; + RTS; + +.data +.align 4; +page_size_table: +.byte4 0x00000400; /* 1K */ +.byte4 0x00001000; /* 4K */ +.byte4 0x00100000; /* 1M */ +.byte4 0x00400000; /* 4M */ + +.align 4; +dcplb_preference: +.byte4 0x00000001; /* valid bit */ +.byte4 0x00000082; /* dirty+lock bits */ +.byte4 0x00000002; /* lock bit */ diff --git a/cpu/bf533/cpu.c b/cpu/bf533/cpu.c new file mode 100644 index 0000000000..2c139f547d --- /dev/null +++ b/cpu/bf533/cpu.c @@ -0,0 +1,194 @@ +/* + * U-boot - cpu.c CPU specific functions + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include + +#define SSYNC() asm("ssync;") +#define CACHE_ON 1 +#define CACHE_OFF 0 + +/* Data Attibutes*/ + +#define SDRAM_IGENERIC (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID) +#define SDRAM_IKERNEL (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_LOCK) +#define L1_IMEMORY (PAGE_SIZE_1MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_LOCK) +#define SDRAM_INON_CHBL (PAGE_SIZE_4MB | CPLB_USER_RD | CPLB_VALID) + +#define ANOMALY_05000158 0x200 +#define SDRAM_DGENERIC (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_SUPV_WR | CPLB_USER_RD | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158) +#define SDRAM_DNON_CHBL (PAGE_SIZE_4MB | CPLB_WT | CPLB_L1_AOW | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158) +#define SDRAM_DKERNEL (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_USER_RD | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_VALID | CPLB_LOCK | ANOMALY_05000158) +#define L1_DMEMORY (PAGE_SIZE_4KB | CPLB_L1_CHBL | CPLB_L1_AOW | CPLB_WT | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158) +#define SDRAM_EBIU (PAGE_SIZE_4MB | CPLB_WT | CPLB_L1_AOW | CPLB_USER_RD | CPLB_USER_WR | CPLB_SUPV_WR | CPLB_VALID | ANOMALY_05000158) + +static unsigned int icplb_table[16][2]={ + {0xFFA00000, L1_IMEMORY}, + {0x00000000, SDRAM_IKERNEL}, /*SDRAM_Page1*/ + {0x00400000, SDRAM_IKERNEL}, /*SDRAM_Page1*/ + {0x07C00000, SDRAM_IKERNEL}, /*SDRAM_Page14*/ + {0x00800000, SDRAM_IGENERIC}, /*SDRAM_Page2*/ + {0x00C00000, SDRAM_IGENERIC}, /*SDRAM_Page2*/ + {0x01000000, SDRAM_IGENERIC}, /*SDRAM_Page4*/ + {0x01400000, SDRAM_IGENERIC}, /*SDRAM_Page5*/ + {0x01800000, SDRAM_IGENERIC}, /*SDRAM_Page6*/ + {0x01C00000, SDRAM_IGENERIC}, /*SDRAM_Page7*/ + {0x02000000, SDRAM_IGENERIC}, /*SDRAM_Page8*/ + {0x02400000, SDRAM_IGENERIC}, /*SDRAM_Page9*/ + {0x02800000, SDRAM_IGENERIC}, /*SDRAM_Page10*/ + {0x02C00000, SDRAM_IGENERIC}, /*SDRAM_Page11*/ + {0x03000000, SDRAM_IGENERIC}, /*SDRAM_Page12*/ + {0x03400000, SDRAM_IGENERIC}, /*SDRAM_Page13*/ +}; + +static unsigned int dcplb_table[16][2]={ + {0xFFA00000,L1_DMEMORY}, + {0x00000000,SDRAM_DKERNEL}, /*SDRAM_Page1*/ + {0x00400000,SDRAM_DKERNEL}, /*SDRAM_Page1*/ + {0x07C00000,SDRAM_DKERNEL}, /*SDRAM_Page15*/ + {0x00800000,SDRAM_DGENERIC}, /*SDRAM_Page2*/ + {0x00C00000,SDRAM_DGENERIC}, /*SDRAM_Page3*/ + {0x01000000,SDRAM_DGENERIC}, /*SDRAM_Page4*/ + {0x01400000,SDRAM_DGENERIC}, /*SDRAM_Page5*/ + {0x01800000,SDRAM_DGENERIC}, /*SDRAM_Page6*/ + {0x01C00000,SDRAM_DGENERIC}, /*SDRAM_Page7*/ + {0x02000000,SDRAM_DGENERIC}, /*SDRAM_Page8*/ + {0x02400000,SDRAM_DGENERIC}, /*SDRAM_Page9*/ + {0x02800000,SDRAM_DGENERIC}, /*SDRAM_Page10*/ + {0x02C00000,SDRAM_DGENERIC}, /*SDRAM_Page11*/ + {0x03000000,SDRAM_DGENERIC}, /*SDRAM_Page12*/ + {0x20000000,SDRAM_EBIU}, /*For Network */ +}; + + + + + +int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + __asm__ __volatile__ + ("cli r3;" + "P0 = %0;" + "JUMP (P0);" + : + : "r" (L1_ISRAM) + ); + + return 0; +} + +/* These functions are just used to satisfy the linker */ +int cpu_init(void) +{ + return 0; +} + +int cleanup_before_linux(void) +{ + return 0; +} + +void icache_enable(void) +{ + unsigned int *I0,*I1; + int i; + + I0 = (unsigned int *)ICPLB_ADDR0; + I1 = (unsigned int *)ICPLB_DATA0; + + for(i=0;i<16;i++){ + *I0++ = icplb_table[i][0]; + *I1++ = icplb_table[i][1]; + } + cli(); + SSYNC(); + *(unsigned int *)IMEM_CONTROL = IMC | ENICPLB; + SSYNC(); + sti(); +} + +void icache_disable(void) +{ + cli(); + SSYNC(); + *(unsigned int *)IMEM_CONTROL &= ~(IMC | ENICPLB); + SSYNC(); + sti(); +} + +int icache_status(void) +{ + unsigned int value; + value = *(unsigned int *)IMEM_CONTROL; + + if( value & (IMC|ENICPLB) ) + return CACHE_ON; + else + return CACHE_OFF; +} + +void dcache_enable(void) +{ + unsigned int *I0,*I1; + unsigned int temp; + int i; + I0 = (unsigned int *)DCPLB_ADDR0; + I1 = (unsigned int *)DCPLB_DATA0; + + for(i=0;i<16;i++){ + *I0++ = dcplb_table[i][0]; + *I1++ = dcplb_table[i][1]; + } + cli(); + temp = *(unsigned int *)DMEM_CONTROL; + SSYNC(); + *(unsigned int *)DMEM_CONTROL = ACACHE_BCACHE |ENDCPLB |PORT_PREF0|temp; + SSYNC(); + sti(); +} + + +void dcache_disable(void) +{ + cli(); + SSYNC(); + *(unsigned int *)DMEM_CONTROL &= ~(ACACHE_BCACHE |ENDCPLB |PORT_PREF0); + SSYNC(); + sti(); +} + +int dcache_status(void) +{ + unsigned int value; + value = *(unsigned int *)DMEM_CONTROL; + if( value & (ENDCPLB)) + return CACHE_ON; + else + return CACHE_OFF; +} diff --git a/cpu/bf533/cpu.h b/cpu/bf533/cpu.h new file mode 100644 index 0000000000..7ec33878ea --- /dev/null +++ b/cpu/bf533/cpu.h @@ -0,0 +1,65 @@ +/* + * U-boot - cpu.h + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _CPU_H_ +#define _CPU_H_ + +#include + +#define INTERNAL_IRQS (32) +#define NUM_IRQ_NODES 16 +#define DEF_INTERRUPT_FLAGS 1 +#define MAX_TIM_LOAD 0xFFFFFFFF + +void blackfin_irq_panic(int reason, struct pt_regs * reg); +extern void dump(struct pt_regs * regs); +void display_excp(void); +asmlinkage void evt_nmi(void); +asmlinkage void evt_exception(void); +asmlinkage void trap(void); +asmlinkage void evt_ivhw(void); +asmlinkage void evt_rst(void); +asmlinkage void evt_timer(void); +asmlinkage void evt_evt7(void); +asmlinkage void evt_evt8(void); +asmlinkage void evt_evt9(void); +asmlinkage void evt_evt10(void); +asmlinkage void evt_evt11(void); +asmlinkage void evt_evt12(void); +asmlinkage void evt_evt13(void); +asmlinkage void evt_soft_int1(void); +asmlinkage void evt_system_call(void); +void blackfin_irq_panic(int reason, struct pt_regs * regs); +void blackfin_free_irq(unsigned int irq, void *dev_id); +void call_isr(int irq, struct pt_regs * fp); +void blackfin_do_irq(int vec, struct pt_regs *fp); +void blackfin_init_IRQ(void); +void blackfin_enable_irq(unsigned int irq); +void blackfin_disable_irq(unsigned int irq); +extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); +int blackfin_request_irq(unsigned int irq, + void (*handler)(int, void *, struct pt_regs *), + unsigned long flags,const char *devname,void *dev_id); +void timer_init(void); +#endif diff --git a/cpu/bf533/flush.S b/cpu/bf533/flush.S new file mode 100644 index 0000000000..1f9ec9899e --- /dev/null +++ b/cpu/bf533/flush.S @@ -0,0 +1,402 @@ +/* Copyright (C) 2003 Analog Devices, Inc. All Rights Reserved. + * Copyright (C) 2004 LG SOft India. All Rights Reserved. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. + * + * Blackfin BF533/2.6 support : LG Soft India + */ +#define ASSEMBLY + +#include +#include +#include + +.text + +/* This is an external function being called by the user + * application through __flush_cache_all. Currently this function + * serves the purpose of flushing all the pending writes in + * in the instruction cache. + */ + +ENTRY(flush_instruction_cache) + [--SP] = ( R7:6, P5:4 ); + LINK 12; + SP += -12; + P5.H = (ICPLB_ADDR0 >> 16); + P5.L = (ICPLB_ADDR0 & 0xFFFF); + P4.H = (ICPLB_DATA0 >> 16); + P4.L = (ICPLB_DATA0 & 0xFFFF); + R7 = CPLB_VALID | CPLB_L1_CHBL; + R6 = 16; +inext: R0 = [P5++]; + R1 = [P4++]; + [--SP] = RETS; + CALL icplb_flush; /* R0 = page, R1 = data*/ + RETS = [SP++]; +iskip: R6 += -1; + CC = R6; + IF CC JUMP inext; + SSYNC; + SP += 12; + UNLINK; + ( R7:6, P5:4 ) = [SP++]; + RTS; + +/* This is an internal function to flush all pending + * writes in the cache associated with a particular ICPLB. + * + * R0 - page's start address + * R1 - CPLB's data field. + */ + +.align 2 +ENTRY(icplb_flush) + [--SP] = ( R7:0, P5:0 ); + [--SP] = LC0; + [--SP] = LT0; + [--SP] = LB0; + [--SP] = LC1; + [--SP] = LT1; + [--SP] = LB1; + + /* If it's a 1K or 4K page, then it's quickest to + * just systematically flush all the addresses in + * the page, regardless of whether they're in the + * cache, or dirty. If it's a 1M or 4M page, there + * are too many addresses, and we have to search the + * cache for lines corresponding to the page. + */ + + CC = BITTST(R1, 17); /* 1MB or 4MB */ + IF !CC JUMP iflush_whole_page; + + /* We're only interested in the page's size, so extract + * this from the CPLB (bits 17:16), and scale to give an + * offset into the page_size and page_prefix tables. + */ + + R1 <<= 14; + R1 >>= 30; + R1 <<= 2; + + /* We can also determine the sub-bank used, because this is + * taken from bits 13:12 of the address. + */ + + R3 = ((12<<8)|2); /* Extraction pattern */ + nop; /*Anamoly 05000209*/ + R4 = EXTRACT(R0, R3.L) (Z); /* Extract bits*/ + R3.H = R4.L << 0 ; /* Save in extraction pattern for later deposit.*/ + + + /* So: + * R0 = Page start + * R1 = Page length (actually, offset into size/prefix tables) + * R3 = sub-bank deposit values + * + * The cache has 2 Ways, and 64 sets, so we iterate through + * the sets, accessing the tag for each Way, for our Bank and + * sub-bank, looking for dirty, valid tags that match our + * address prefix. + */ + + P5.L = (ITEST_COMMAND & 0xFFFF); + P5.H = (ITEST_COMMAND >> 16); + P4.L = (ITEST_DATA0 & 0xFFFF); + P4.H = (ITEST_DATA0 >> 16); + + P0.L = page_prefix_table; + P0.H = page_prefix_table; + P1 = R1; + R5 = 0; /* Set counter*/ + P0 = P1 + P0; + R4 = [P0]; /* This is the address prefix*/ + + /* We're reading (bit 1==0) the tag (bit 2==0), and we + * don't care about which double-word, since we're only + * fetching tags, so we only have to set Set, Bank, + * Sub-bank and Way. + */ + + P2 = 4; + LSETUP (ifs1, ife1) LC1 = P2; +ifs1: P0 = 32; /* iterate over all sets*/ + LSETUP (ifs0, ife0) LC0 = P0; +ifs0: R6 = R5 << 5; /* Combine set*/ + R6.H = R3.H << 0 ; /* and sub-bank*/ + [P5] = R6; /* Issue Command*/ + SSYNC; /* CSYNC will not work here :(*/ + R7 = [P4]; /* and read Tag.*/ + CC = BITTST(R7, 0); /* Check if valid*/ + IF !CC JUMP ifskip; /* and skip if not.*/ + + /* Compare against the page address. First, plant bits 13:12 + * into the tag, since those aren't part of the returned data. + */ + + R7 = DEPOSIT(R7, R3); /* set 13:12*/ + R1 = R7 & R4; /* Mask off lower bits*/ + CC = R1 == R0; /* Compare against page start.*/ + IF !CC JUMP ifskip; /* Skip it if it doesn't match.*/ + + /* Tag address matches against page, so this is an entry + * we must flush. + */ + + R7 >>= 10; /* Mask off the non-address bits*/ + R7 <<= 10; + P3 = R7; + IFLUSH [P3]; /* And flush the entry*/ +ifskip: +ife0: R5 += 1; /* Advance to next Set*/ +ife1: NOP; + +ifinished: + SSYNC; /* Ensure the data gets out to mem.*/ + + /*Finished. Restore context.*/ + LB1 = [SP++]; + LT1 = [SP++]; + LC1 = [SP++]; + LB0 = [SP++]; + LT0 = [SP++]; + LC0 = [SP++]; + ( R7:0, P5:0 ) = [SP++]; + RTS; + +iflush_whole_page: + /* It's a 1K or 4K page, so quicker to just flush the + * entire page. + */ + + P1 = 32; /* For 1K pages*/ + P2 = P1 << 2; /* For 4K pages*/ + P0 = R0; /* Start of page*/ + CC = BITTST(R1, 16); /* Whether 1K or 4K*/ + IF CC P1 = P2; + P1 += -1; /* Unroll one iteration*/ + SSYNC; + IFLUSH [P0++]; /* because CSYNC can't end loops.*/ + LSETUP (isall, ieall) LC0 = P1; +isall:IFLUSH [P0++]; +ieall: NOP; + SSYNC; + JUMP ifinished; + +/* This is an external function being called by the user + * application through __flush_cache_all. Currently this function + * serves the purpose of flushing all the pending writes in + * in the data cache. + */ + +ENTRY(flush_data_cache) + [--SP] = ( R7:6, P5:4 ); + LINK 12; + SP += -12; + P5.H = (DCPLB_ADDR0 >> 16); + P5.L = (DCPLB_ADDR0 & 0xFFFF); + P4.H = (DCPLB_DATA0 >> 16); + P4.L = (DCPLB_DATA0 & 0xFFFF); + R7 = CPLB_VALID | CPLB_L1_CHBL | CPLB_DIRTY (Z); + R6 = 16; +next: R0 = [P5++]; + R1 = [P4++]; + CC = BITTST(R1, 14); /* Is it write-through?*/ + IF CC JUMP skip; /* If so, ignore it.*/ + R2 = R1 & R7; /* Is it a dirty, cached page?*/ + CC = R2; + IF !CC JUMP skip; /* If not, ignore it.*/ + [--SP] = RETS; + CALL dcplb_flush; /* R0 = page, R1 = data*/ + RETS = [SP++]; +skip: R6 += -1; + CC = R6; + IF CC JUMP next; + SSYNC; + SP += 12; + UNLINK; + ( R7:6, P5:4 ) = [SP++]; + RTS; + +/* This is an internal function to flush all pending + * writes in the cache associated with a particular DCPLB. + * + * R0 - page's start address + * R1 - CPLB's data field. + */ + +.align 2 +ENTRY(dcplb_flush) + [--SP] = ( R7:0, P5:0 ); + [--SP] = LC0; + [--SP] = LT0; + [--SP] = LB0; + [--SP] = LC1; + [--SP] = LT1; + [--SP] = LB1; + + /* If it's a 1K or 4K page, then it's quickest to + * just systematically flush all the addresses in + * the page, regardless of whether they're in the + * cache, or dirty. If it's a 1M or 4M page, there + * are too many addresses, and we have to search the + * cache for lines corresponding to the page. + */ + + CC = BITTST(R1, 17); /* 1MB or 4MB */ + IF !CC JUMP dflush_whole_page; + + /* We're only interested in the page's size, so extract + * this from the CPLB (bits 17:16), and scale to give an + * offset into the page_size and page_prefix tables. + */ + + R1 <<= 14; + R1 >>= 30; + R1 <<= 2; + + /* The page could be mapped into Bank A or Bank B, depending + * on (a) whether both banks are configured as cache, and + * (b) on whether address bit A[x] is set. x is determined + * by DCBS in DMEM_CONTROL + */ + + R2 = 0; /* Default to Bank A (Bank B would be 1)*/ + + P0.L = (DMEM_CONTROL & 0xFFFF); + P0.H = (DMEM_CONTROL >> 16); + + R3 = [P0]; /* If Bank B is not enabled as cache*/ + CC = BITTST(R3, 2); /* then Bank A is our only option.*/ + IF CC JUMP bank_chosen; + + R4 = 1<<14; /* If DCBS==0, use A[14].*/ + R5 = R4 << 7; /* If DCBS==1, use A[23];*/ + CC = BITTST(R3, 4); + IF CC R4 = R5; /* R4 now has either bit 14 or bit 23 set.*/ + R5 = R0 & R4; /* Use it to test the Page address*/ + CC = R5; /* and if that bit is set, we use Bank B,*/ + R2 = CC; /* else we use Bank A.*/ + R2 <<= 23; /* The Bank selection's at posn 23.*/ + +bank_chosen: + + /* We can also determine the sub-bank used, because this is + * taken from bits 13:12 of the address. + */ + + R3 = ((12<<8)|2); /* Extraction pattern */ + nop; /*Anamoly 05000209*/ + R4 = EXTRACT(R0, R3.L) (Z); /* Extract bits*/ + R3.H = R4.L << 0 ; /* Save in extraction pattern for later deposit.*/ + + /* So: + * R0 = Page start + * R1 = Page length (actually, offset into size/prefix tables) + * R2 = Bank select mask + * R3 = sub-bank deposit values + * + * The cache has 2 Ways, and 64 sets, so we iterate through + * the sets, accessing the tag for each Way, for our Bank and + * sub-bank, looking for dirty, valid tags that match our + * address prefix. + */ + + P5.L = (DTEST_COMMAND & 0xFFFF); + P5.H = (DTEST_COMMAND >> 16); + P4.L = (DTEST_DATA0 & 0xFFFF); + P4.H = (DTEST_DATA0 >> 16); + + P0.L = page_prefix_table; + P0.H = page_prefix_table; + P1 = R1; + R5 = 0; /* Set counter*/ + P0 = P1 + P0; + R4 = [P0]; /* This is the address prefix*/ + + + /* We're reading (bit 1==0) the tag (bit 2==0), and we + * don't care about which double-word, since we're only + * fetching tags, so we only have to set Set, Bank, + * Sub-bank and Way. + */ + + P2 = 2; + LSETUP (fs1, fe1) LC1 = P2; +fs1: P0 = 64; /* iterate over all sets*/ + LSETUP (fs0, fe0) LC0 = P0; +fs0: R6 = R5 << 5; /* Combine set*/ + R6.H = R3.H << 0 ; /* and sub-bank*/ + R6 = R6 | R2; /* and Bank. Leave Way==0 at first.*/ + BITSET(R6,14); + [P5] = R6; /* Issue Command*/ + SSYNC; + R7 = [P4]; /* and read Tag.*/ + CC = BITTST(R7, 0); /* Check if valid*/ + IF !CC JUMP fskip; /* and skip if not.*/ + CC = BITTST(R7, 1); /* Check if dirty*/ + IF !CC JUMP fskip; /* and skip if not.*/ + + /* Compare against the page address. First, plant bits 13:12 + * into the tag, since those aren't part of the returned data. + */ + + R7 = DEPOSIT(R7, R3); /* set 13:12*/ + R1 = R7 & R4; /* Mask off lower bits*/ + CC = R1 == R0; /* Compare against page start.*/ + IF !CC JUMP fskip; /* Skip it if it doesn't match.*/ + + /* Tag address matches against page, so this is an entry + * we must flush. + */ + + R7 >>= 10; /* Mask off the non-address bits*/ + R7 <<= 10; + P3 = R7; + SSYNC; + FLUSHINV [P3]; /* And flush the entry*/ +fskip: +fe0: R5 += 1; /* Advance to next Set*/ +fe1: BITSET(R2, 26); /* Go to next Way.*/ + +dfinished: + SSYNC; /* Ensure the data gets out to mem.*/ + + /*Finished. Restore context.*/ + LB1 = [SP++]; + LT1 = [SP++]; + LC1 = [SP++]; + LB0 = [SP++]; + LT0 = [SP++]; + LC0 = [SP++]; + ( R7:0, P5:0 ) = [SP++]; + RTS; + +dflush_whole_page: + + /* It's a 1K or 4K page, so quicker to just flush the + * entire page. + */ + + P1 = 32; /* For 1K pages*/ + P2 = P1 << 2; /* For 4K pages*/ + P0 = R0; /* Start of page*/ + CC = BITTST(R1, 16); /* Whether 1K or 4K*/ + IF CC P1 = P2; + P1 += -1; /* Unroll one iteration*/ + SSYNC; + FLUSHINV [P0++]; /* because CSYNC can't end loops.*/ + LSETUP (eall, eall) LC0 = P1; +eall: FLUSHINV [P0++]; + SSYNC; + JUMP dfinished; + +.align 4; +page_prefix_table: +.byte4 0xFFFFFC00; /* 1K */ +.byte4 0xFFFFF000; /* 4K */ +.byte4 0xFFF00000; /* 1M */ +.byte4 0xFFC00000; /* 4M */ +.page_prefix_table.end: diff --git a/cpu/bf533/interrupt.S b/cpu/bf533/interrupt.S new file mode 100644 index 0000000000..b4d2579c44 --- /dev/null +++ b/cpu/bf533/interrupt.S @@ -0,0 +1,391 @@ +/* + * U-boot - interrupt.S Processing of interrupts and exception handling + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * This file is based on interrupt.S + * + * Copyright (C) 2003 Metrowerks, Inc. + * Copyright (C) 2002 Arcturus Networks Ltd. Ted Ma + * Copyright (C) 1998 D. Jeff Dionne , + * Kenneth Albanowski , + * The Silver Hammer Group, Ltd. + * + * (c) 1995, Dionne & Associates + * (c) 1995, DKG Display Tech. + * + * This file is also based on exception.asm + * (C) Copyright 2001-2005 - Analog Devices, Inc. All rights reserved. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#define ASSEMBLY + +#include +#include +#include +#include + +.global blackfin_irq_panic; + +.text +.align 2 + +#ifndef CONFIG_KGDB +.global evt_emulation +evt_emulation: + SAVE_CONTEXT + r0 = IRQ_EMU; + r1 = seqstat; + sp += -12; + call blackfin_irq_panic; + sp += 12; + rte; +#endif + +.global evt_nmi +evt_nmi: + SAVE_CONTEXT + r0 = IRQ_NMI; + r1 = RETN; + sp += -12; + call blackfin_irq_panic; + sp += 12; + +_evt_nmi_exit: + rtn; + +.global trap +trap: + [--sp] = r0; + [--sp] = r1; + [--sp] = p0; + [--sp] = p1; + [--sp] = astat; + r0 = seqstat; + R0 <<= 26; + R0 >>= 26; + p0 = r0; + p1.l = EVTABLE; + p1.h = EVTABLE; + p0 = p1 + (p0 << 1); + r1 = W[p0] (Z); + p1 = r1; + jump (pc + p1); + +.global _EVENT1 +_EVENT1: + RAISE 14; + JUMP.S _EXIT; + +.global _EVENT2 +_EVENT2: + RAISE 14; + JUMP.S _EXIT; + +.global _EVENT3 +_EVENT3: + RAISE 14; + JUMP.S _EXIT; + +.global _EVENT4 +_EVENT4: + RAISE 14; + JUMP.S _EXIT; + +.global _EVENT5 +_EVENT5: + RAISE 14; + JUMP.S _EXIT; + +.global _EVENT6 +_EVENT6: + RAISE 14; + JUMP.S _EXIT; + +.global _EVENT7 +_EVENT7: + RAISE 15; + JUMP.S _EXIT; + +.global _EVENT8 +_EVENT8: + RAISE 14; + JUMP.S _EXIT; + +.global _EVENT9 +_EVENT9: + RAISE 14; + JUMP.S _EXIT; + +.global _EVENT10 +_EVENT10: + RAISE 14; + JUMP.S _EXIT; + +.global _EVENT11 +_EVENT11: + RAISE 14; + JUMP.S _EXIT; + +.global _EVENT12 +_EVENT12: + RAISE 14; + JUMP.S _EXIT; + +.global _EVENT13 +_EVENT13: + RAISE 14; + JUMP.S _EXIT; + +.global _EVENT14 +_EVENT14: +/* RAISE 14; */ + CALL _cplb_hdr; + JUMP.S _EXIT; + +.global _EVENT19 +_EVENT19: + RAISE 14; + JUMP.S _EXIT; + +.global _EVENT20 +_EVENT20: + RAISE 14; + JUMP.S _EXIT; + +.global _EVENT21 +_EVENT21: + RAISE 14; + JUMP.S _EXIT; + +.global _EXIT +_EXIT: + ASTAT = [sp++]; + p1 = [sp++]; + p0 = [sp++]; + r1 = [sp++]; + r0 = [sp++]; + RTX; + +EVTABLE: + .byte2 0x0000; + .byte2 0x0000; + .byte2 0x0000; + .byte2 0x0000; + .byte2 0x0000; + .byte2 0x0000; + .byte2 0x0000; + .byte2 0x0000; + .byte2 0x0000; + .byte2 0x0000; + .byte2 0x0000; + .byte2 0x0000; + .byte2 0x0000; + .byte2 0x0000; + .byte2 0x0000; + .byte2 0x0000; + .byte2 0x003E; + .byte2 0x0042; + .byte4 0x0000; + .byte4 0x0000; + .byte4 0x0000; + .byte4 0x0000; + .byte4 0x0000; + .byte4 0x0000; + .byte4 0x0000; + .byte2 0x0000; + .byte2 0x001E; + .byte2 0x0022; + .byte2 0x0032; + .byte2 0x002e; + .byte2 0x0002; + .byte2 0x0036; + .byte2 0x002A; + .byte2 0x001A; + .byte2 0x0016; + .byte2 0x000A; + .byte2 0x000E; + .byte2 0x0012; + .byte2 0x0006; + .byte2 0x0026; + +.global evt_rst +evt_rst: + SAVE_CONTEXT + r0 = IRQ_RST; + r1 = RETN; + sp += -12; + call do_reset; + sp += 12; + +_evt_rst_exit: + rtn; + +irq_panic: + r0 = IRQ_EVX; + r1 = sp; + sp += -12; + call blackfin_irq_panic; + sp += 12; + +.global evt_ivhw +evt_ivhw: + SAVE_CONTEXT + RAISE 14; + +_evt_ivhw_exit: + rti; + +.global evt_timer +evt_timer: + SAVE_CONTEXT + r0 = IRQ_CORETMR; + sp += -12; + /* Polling method used now. */ + /* call timer_int; */ + sp += 12; + RESTORE_CONTEXT + rti; + nop; + +.global evt_evt7 +evt_evt7: + SAVE_CONTEXT + r0 = 7; + sp += -12; + call process_int; + sp += 12; + +evt_evt7_exit: + RESTORE_CONTEXT + rti; + +.global evt_evt8 +evt_evt8: + SAVE_CONTEXT + r0 = 8; + sp += -12; + call process_int; + sp += 12; + +evt_evt8_exit: + RESTORE_CONTEXT + rti; + +.global evt_evt9 +evt_evt9: + SAVE_CONTEXT + r0 = 9; + sp += -12; + call process_int; + sp += 12; + +evt_evt9_exit: + RESTORE_CONTEXT + rti; + +.global evt_evt10 +evt_evt10: + SAVE_CONTEXT + r0 = 10; + sp += -12; + call process_int; + sp += 12; + +evt_evt10_exit: + RESTORE_CONTEXT + rti; + +.global evt_evt11 +evt_evt11: + SAVE_CONTEXT + r0 = 11; + sp += -12; + call process_int; + sp += 12; + +evt_evt11_exit: + RESTORE_CONTEXT + rti; + +.global evt_evt12 +evt_evt12: + SAVE_CONTEXT + r0 = 12; + sp += -12; + call process_int; + sp += 12; +evt_evt12_exit: + RESTORE_CONTEXT + rti; + +.global evt_evt13 +evt_evt13: + SAVE_CONTEXT + r0 = 13; + sp += -12; + call process_int; + sp += 12; + +evt_evt13_exit: + RESTORE_CONTEXT + rti; + +.global evt_system_call +evt_system_call: + [--sp] = r0; + [--SP] = RETI; + r0 = [sp++]; + r0 += 2; + [--sp] = r0; + RETI = [SP++]; + r0 = [SP++]; + SAVE_CONTEXT + sp += -12; + call display_excp; + sp += 12; + RESTORE_CONTEXT + RTI; + +evt_system_call_exit: + rti; + +.global evt_soft_int1 +evt_soft_int1: + [--sp] = r0; + [--SP] = RETI; + r0 = [sp++]; + r0 += 2; + [--sp] = r0; + RETI = [SP++]; + r0 = [SP++]; + SAVE_CONTEXT + sp += -12; + call display_excp; + sp += 12; + RESTORE_CONTEXT + RTI; + +evt_soft_int1_exit: + rti; diff --git a/cpu/bf533/interrupts.c b/cpu/bf533/interrupts.c new file mode 100644 index 0000000000..df1a25ec75 --- /dev/null +++ b/cpu/bf533/interrupts.c @@ -0,0 +1,165 @@ +/* + * U-boot - interrupts.c Interrupt related routines + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * This file is based on interrupts.c + * Copyright 1996 Roman Zippel + * Copyright 1999 D. Jeff Dionne + * Copyright 2000-2001 Lineo, Inc. D. Jefff Dionne + * Copyright 2002 Arcturus Networks Inc. MaTed + * Copyright 2003 Metrowerks/Motorola + * Copyright 2003 Bas Vermeulen , + * BuyWays B.V. (www.buyways.nl) + * + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include "cpu.h" + +static ulong timestamp; +static ulong last_time; +static int int_flag; + +int irq_flags; /* needed by asm-blackfin/system.h */ + +/* Functions just to satisfy the linker */ + +/* + * This function is derived from PowerPC code (read timebase as long long). + * On BF533 it just returns the timer value. + */ +unsigned long long get_ticks(void) +{ + return get_timer(0); +} + +/* + * This function is derived from PowerPC code (timebase clock frequency). + * On BF533 it returns the number of timer ticks per second. + */ +ulong get_tbclk (void) +{ + ulong tbclk; + + tbclk = CFG_HZ; + return tbclk; +} + +void enable_interrupts(void) +{ + restore_flags(int_flag); +} + +int disable_interrupts(void) +{ + save_and_cli(int_flag); + return 1; +} + +int interrupt_init(void) +{ + return (0); +} + +void udelay(unsigned long usec) +{ + unsigned long delay, start, stop; + unsigned long cclk; + cclk = (CONFIG_CCLK_HZ); + + while ( usec > 1 ) { + /* + * how many clock ticks to delay? + * - request(in useconds) * clock_ticks(Hz) / useconds/second + */ + if (usec < 1000) { + delay = (usec * (cclk/244)) >> 12 ; + usec = 0; + } else { + delay = (1000 * (cclk/244)) >> 12 ; + usec -= 1000; + } + + asm volatile (" %0 = CYCLES;": "=g"(start)); + do { + asm volatile (" %0 = CYCLES; ": "=g"(stop)); + } while (stop - start < delay); + } + + return; +} + +void timer_init(void) +{ + *pTCNTL = 0x1; + *pTSCALE = 0x0; + *pTCOUNT = MAX_TIM_LOAD; + *pTPERIOD = MAX_TIM_LOAD; + *pTCNTL = 0x7; + asm("CSYNC;"); + + timestamp = 0; + last_time = 0; +} + +/* Any network command or flash + * command is started get_timer shall + * be called before TCOUNT gets reset, + * to implement the accurate timeouts. + * + * How ever milliconds doesn't return + * the number that has been elapsed from + * the last reset. + * + * As get_timer is used in the u-boot + * only for timeouts this should be + * sufficient + */ +ulong get_timer(ulong base) +{ + ulong milisec; + + /* Number of clocks elapsed */ + ulong clocks = (MAX_TIM_LOAD - (*pTCOUNT)); + + /* Find if the TCOUNT is reset + timestamp gives the number of times + TCOUNT got reset */ + if(clocks < last_time) + timestamp++; + last_time = clocks; + + /* Get the number of milliseconds */ + milisec = clocks/(CONFIG_CCLK_HZ / 1000); + + /* Find the number of millisonds + that got elapsed before this TCOUNT + cycle */ + milisec += timestamp * (MAX_TIM_LOAD/(CONFIG_CCLK_HZ / 1000)); + + return (milisec - base); +} diff --git a/cpu/bf533/ints.c b/cpu/bf533/ints.c new file mode 100644 index 0000000000..859f4b2f09 --- /dev/null +++ b/cpu/bf533/ints.c @@ -0,0 +1,107 @@ +/* + * U-boot - ints.c Interrupt related routines + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * This file is based on ints.c + * + * Apr18 2003, Changed by HuTao to support interrupt cascading for Blackfin + * drivers + * + * Copyright 1996 Roman Zippel + * Copyright 1999 D. Jeff Dionne + * Copyright 2000-2001 Lineo, Inc. D. Jefff Dionne + * Copyright 2002 Arcturus Networks Inc. MaTed + * Copyright 2003 Metrowerks/Motorola + * + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "cpu.h" + +void blackfin_irq_panic(int reason, struct pt_regs *regs) +{ + printf("\n\nException: IRQ 0x%x entered\n", reason); + printf("code=[0x%x], ", (unsigned int) (regs->seqstat & 0x3f)); + printf("stack frame=0x%x, ", (unsigned int) regs); + printf("bad PC=0x%04x\n", (unsigned int) regs->pc); + dump(regs); + printf("Unhandled IRQ or exceptions!\n"); + printf("Please reset the board \n"); +} + +void blackfin_init_IRQ(void) +{ + *(unsigned volatile long *) (SIC_IMASK) = SIC_UNMASK_ALL; + cli(); +#ifndef CONFIG_KGDB + *(unsigned volatile long *) (EVT_EMULATION_ADDR) = 0x0; +#endif + *(unsigned volatile long *) (EVT_NMI_ADDR) = + (unsigned volatile long) evt_nmi; + *(unsigned volatile long *) (EVT_EXCEPTION_ADDR) = + (unsigned volatile long) trap; + *(unsigned volatile long *) (EVT_HARDWARE_ERROR_ADDR) = + (unsigned volatile long) evt_ivhw; + *(unsigned volatile long *) (EVT_RESET_ADDR) = + (unsigned volatile long) evt_rst; + *(unsigned volatile long *) (EVT_TIMER_ADDR) = + (unsigned volatile long) evt_timer; + *(unsigned volatile long *) (EVT_IVG7_ADDR) = + (unsigned volatile long) evt_evt7; + *(unsigned volatile long *) (EVT_IVG8_ADDR) = + (unsigned volatile long) evt_evt8; + *(unsigned volatile long *) (EVT_IVG9_ADDR) = + (unsigned volatile long) evt_evt9; + *(unsigned volatile long *) (EVT_IVG10_ADDR) = + (unsigned volatile long) evt_evt10; + *(unsigned volatile long *) (EVT_IVG11_ADDR) = + (unsigned volatile long) evt_evt11; + *(unsigned volatile long *) (EVT_IVG12_ADDR) = + (unsigned volatile long) evt_evt12; + *(unsigned volatile long *) (EVT_IVG13_ADDR) = + (unsigned volatile long) evt_evt13; + *(unsigned volatile long *) (EVT_IVG14_ADDR) = + (unsigned volatile long) evt_system_call; + *(unsigned volatile long *) (EVT_IVG15_ADDR) = + (unsigned volatile long) evt_soft_int1; + *(volatile unsigned long *) ILAT = 0; + asm("csync;"); + sti(); + *(volatile unsigned long *) IMASK = 0xffbf; + asm("csync;"); +} + +void display_excp(void) +{ + printf("Exception!\n"); +} diff --git a/cpu/bf533/serial.c b/cpu/bf533/serial.c new file mode 100644 index 0000000000..8f0cd1649d --- /dev/null +++ b/cpu/bf533/serial.c @@ -0,0 +1,194 @@ +/* + * U-boot - serial.c Serial driver for BF533 + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * This file is based on + * bf533_serial.c: Serial driver for BlackFin BF533 DSP internal UART. + * Copyright (c) 2003 Bas Vermeulen , + * BuyWays B.V. (www.buyways.nl) + * + * Based heavily on blkfinserial.c + * blkfinserial.c: Serial driver for BlackFin DSP internal USRTs. + * Copyright(c) 2003 Metrowerks + * Copyright(c) 2001 Tony Z. Kou + * Copyright(c) 2001-2002 Arcturus Networks Inc. + * + * Based on code from 68328 version serial driver imlpementation which was: + * Copyright (C) 1995 David S. Miller + * Copyright (C) 1998 Kenneth Albanowski + * Copyright (C) 1998, 1999 D. Jeff Dionne + * Copyright (C) 1999 Vladimir Gurevich + * + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include "bf533_serial.h" + +unsigned long pll_div_fact; + +void calc_baud(void) +{ + unsigned char i; + int temp; + + for(i = 0; i < sizeof(baud_table)/sizeof(int); i++) { + temp = CONFIG_SCLK_HZ/(baud_table[i]*8); + if ( temp && 0x1 == 1 ) { + temp++; + } + temp = temp/2; + hw_baud_table[i].dl_high = (temp >> 8)& 0xFF; + hw_baud_table[i].dl_low = (temp) & 0xFF; + } +} + +void serial_setbrg(void) +{ + int i; + DECLARE_GLOBAL_DATA_PTR; + + calc_baud(); + + for (i = 0; i < sizeof(baud_table) / sizeof(int); i++) { + if (gd->baudrate == baud_table[i]) + break; + } + + /* Enable UART */ + *pUART_GCTL |= UART_GCTL_UCEN; + asm("ssync;"); + + /* Set DLAB in LCR to Access DLL and DLH */ + ACCESS_LATCH; + asm("ssync;"); + + *pUART_DLL = hw_baud_table[i].dl_low; + asm("ssync;"); + *pUART_DLH = hw_baud_table[i].dl_high; + asm("ssync;"); + + /* Clear DLAB in LCR to Access THR RBR IER */ + ACCESS_PORT_IER; + asm("ssync;"); + + /* Enable ERBFI and ELSI interrupts + * to poll SIC_ISR register*/ + *pUART_IER = UART_IER_ELSI | UART_IER_ERBFI | UART_IER_ETBEI; + asm("ssync;"); + + /* Set LCR to Word Lengh 8-bit word select */ + *pUART_LCR = UART_LCR_WLS8; + asm("ssync;"); + + return; +} + +int serial_init(void) +{ + serial_setbrg(); + return (0); +} + +void serial_putc(const char c) +{ + if ((*pUART_LSR) & UART_LSR_TEMT) + { + if (c == '\n') + serial_putc('\r'); + + local_put_char(c); + } + + while (!((*pUART_LSR) & UART_LSR_TEMT)) + SYNC_ALL; + + return; +} + +int serial_tstc(void) +{ + if (*pUART_LSR & UART_LSR_DR) + return 1; + else + return 0; +} + +int serial_getc(void) +{ + unsigned short uart_lsr_val, uart_rbr_val; + unsigned long isr_val; + int ret; + + /* Poll for RX Interrupt */ + while (!((isr_val = *(volatile unsigned long *)SIC_ISR) & IRQ_UART_RX_BIT)); + asm("csync;"); + + uart_lsr_val = *pUART_LSR; /* Clear status bit */ + uart_rbr_val = *pUART_RBR; /* getc() */ + + if (isr_val & IRQ_UART_ERROR_BIT) { + ret = -1; + } + else + { + ret = uart_rbr_val & 0xff; + } + + return ret; +} + +void serial_puts(const char *s) +{ + while (*s) { + serial_putc(*s++); + } +} + +static void local_put_char(char ch) +{ + int flags = 0; + unsigned long isr_val; + + save_and_cli(flags); + + /* Poll for TX Interruput */ + while (!((isr_val = *pSIC_ISR) & IRQ_UART_TX_BIT)); + asm("csync;"); + + *pUART_THR = ch; /* putc() */ + + if (isr_val & IRQ_UART_ERROR_BIT) { + printf("?"); + } + + restore_flags(flags); + + return ; +} diff --git a/cpu/bf533/start.S b/cpu/bf533/start.S new file mode 100644 index 0000000000..7414d8873d --- /dev/null +++ b/cpu/bf533/start.S @@ -0,0 +1,435 @@ +/* + * U-boot - start.S Startup file of u-boot for BF533 + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * This file is based on head.S + * Copyright (c) 2003 Metrowerks/Motorola + * Copyright (C) 1998 D. Jeff Dionne , + * Kenneth Albanowski , + * The Silver Hammer Group, Ltd. + * (c) 1995, Dionne & Associates + * (c) 1995, DKG Display Tech. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * Note: A change in this file subsequently requires a change in + * board/$(board_name)/config.mk for a valid u-boot.bin + */ + +#define ASSEMBLY + +#include +#include +#include +#include + +#if (CONFIG_CCLK_DIV == 1) +#define CONFIG_CCLK_ACT_DIV CCLK_DIV1 +#endif +#if (CONFIG_CCLK_DIV == 2) +#define CONFIG_CCLK_ACT_DIV CCLK_DIV2 +#endif +#if (CONFIG_CCLK_DIV == 4) +#define CONFIG_CCLK_ACT_DIV CCLK_DIV4 +#endif +#if (CONFIG_CCLK_DIV == 8) +#define CONFIG_CCLK_ACT_DIV CCLK_DIV8 +#endif +#ifndef CONFIG_CCLK_ACT_DIV +#define CONFIG_CCLK_ACT_DIV CONFIG_CCLK_DIV_not_defined_properly +#endif + +.global _stext; +.global __bss_start; +.global start; +.global _start; +.global _rambase; +.global _ramstart; +.global _ramend; +.global _bf533_data_dest; +.global _bf533_data_size; +.global edata; +.global _initialize; +.global _exit; +.global flashdataend; + +.text +_start: +start: +_stext: + + R0 = 0x30; + SYSCFG = R0; + SSYNC; + + /* As per HW reference manual DAG registers, + * DATA and Address resgister shall be zero'd + * in initialization, after a reset state + */ + r1 = 0; /* Data registers zero'd */ + r2 = 0; + r3 = 0; + r4 = 0; + r5 = 0; + r6 = 0; + r7 = 0; + + p0 = 0; /* Address registers zero'd */ + p1 = 0; + p2 = 0; + p3 = 0; + p4 = 0; + p5 = 0; + + i0 = 0; /* DAG Registers zero'd */ + i1 = 0; + i2 = 0; + i3 = 0; + m0 = 0; + m1 = 0; + m3 = 0; + m3 = 0; + l0 = 0; + l1 = 0; + l2 = 0; + l3 = 0; + b0 = 0; + b1 = 0; + b2 = 0; + b3 = 0; + + /* Set loop counters to zero, to make sure that + * hw loops are disabled. + */ + lc0 = 0; + lc1 = 0; + + SSYNC; + + /* Check soft reset status */ + p0.h = SWRST >> 16; + p0.l = SWRST & 0xFFFF; + r0.l = w[p0]; + + cc = bittst(r0, 15); + if !cc jump no_soft_reset; + + /* Clear Soft reset */ + r0 = 0x0000; + w[p0] = r0; + ssync; + +no_soft_reset: + nop; + + /* Clear EVT registers */ + p0.h = (EVT_EMULATION_ADDR >> 16); + p0.l = (EVT_EMULATION_ADDR & 0xFFFF); + p0 += 8; + p1 = 14; + r1 = 0; + LSETUP(4,4) lc0 = p1; + [ p0 ++ ] = r1; + + /* + * Set PLL_CTL + * - [14:09] = MSEL[5:0] : CLKIN / VCO multiplication factors + * - [8] = BYPASS : BYPASS the PLL, run CLKIN into CCLK/SCLK + * - [7] = output delay (add 200ps of delay to mem signals) + * - [6] = input delay (add 200ps of input delay to mem signals) + * - [5] = PDWN : 1=All Clocks off + * - [3] = STOPCK : 1=Core Clock off + * - [1] = PLL_OFF : 1=Disable Power to PLL + * - [0] = DF : 1=Pass CLKIN/2 to PLL / 0=Pass CLKIN to PLL + * all other bits set to zero + */ + + r0 = CONFIG_VCO_MULT; /* Load the VCO multiplier */ + r0 = r0 << 9; /* Shift it over */ + r1 = CONFIG_CLKIN_HALF; /* Do we need to divide CLKIN by 2? */ + r0 = r1 | r0; + r1 = CONFIG_PLL_BYPASS; /* Bypass the PLL? */ + r1 = r1 << 8; /* Shift it over */ + r0 = r1 | r0; /* add them all together */ + + p0.h = (PLL_CTL >> 16); + p0.l = (PLL_CTL & 0xFFFF); /* Load the address */ + cli r2; /* Disable interrupts */ + w[p0] = r0; /* Set the value */ + idle; /* Wait for the PLL to stablize */ + sti r2; /* Enable interrupts */ + ssync; + + /* + * Turn on the CYCLES COUNTER + */ + r2 = SYSCFG; + BITSET (r2,1); + SYSCFG = r2; + + /* Configure SCLK & CCLK Dividers */ + r0 = CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV; + p0.h = (PLL_DIV >> 16); + p0.l = (PLL_DIV & 0xFFFF); + w[p0] = r0; + ssync; + +wait_for_pll_stab: + p0.h = (PLL_STAT >> 16); + p0.l = (PLL_STAT & 0xFFFF); + r0.l = w[p0]; + cc = bittst(r0,5); + if !cc jump wait_for_pll_stab; + + /* Configure SDRAM if SDRAM is already not enabled */ + p0.l = (EBIU_SDSTAT & 0xFFFF); + p0.h = (EBIU_SDSTAT >> 16); + r0.l = w[p0]; + cc = bittst(r0, 3); + if !cc jump skip_sdram_enable; + + /* SDRAM initialization */ + p0.l = (EBIU_SDGCTL & 0xFFFF); + p0.h = (EBIU_SDGCTL >> 16); /* SDRAM Memory Global Control Register */ + r0.h = (mem_SDGCTL >> 16); + r0.l = (mem_SDGCTL & 0xFFFF); + [p0] = r0; + ssync; + + p0.l = (EBIU_SDBCTL & 0xFFFF); + p0.h = (EBIU_SDBCTL >> 16); /* SDRAM Memory Bank Control Register */ + r0 = mem_SDBCTL; + w[p0] = r0.l; + ssync; + + p0.l = (EBIU_SDRRC & 0xFFFF); + p0.h = (EBIU_SDRRC >> 16); /* SDRAM Refresh Rate Control Register */ + r0 = mem_SDRRC; + w[p0] = r0.l; + ssync; + +skip_sdram_enable: + nop; + +#ifndef CFG_NO_FLASH + /* relocate into to RAM */ + p1.l = (CFG_FLASH_BASE & 0xffff); + p1.h = (CFG_FLASH_BASE >> 16); + p2.l = (CFG_MONITOR_BASE & 0xffff); + p2.h = (CFG_MONITOR_BASE >> 16); + r0.l = (CFG_MONITOR_LEN & 0xffff); + r0.h = (CFG_MONITOR_LEN >> 16); +loop1: + r1 = [p1]; + [p2] = r1; + p3=0x4; + p1=p1+p3; + p2=p2+p3; + r2=0x4; + r0=r0-r2; + cc=r0==0x0; + if !cc jump loop1; +#endif + /* + * configure STACK + */ + r0.h = (CONFIG_STACKBASE >> 16); + r0.l = (CONFIG_STACKBASE & 0xFFFF); + sp = r0; + fp = sp; + + /* + * This next section keeps the processor in supervisor mode + * during kernel boot. Switches to user mode at end of boot. + * See page 3-9 of Hardware Reference manual for documentation. + */ + + /* To keep ourselves in the supervisor mode */ + p0.l = (EVT_IVG15_ADDR & 0xFFFF); + p0.h = (EVT_IVG15_ADDR >> 16); + + p1.l = _real_start; + p1.h = _real_start; + [p0] = p1; + + p0.l = (IMASK & 0xFFFF); + p0.h = (IMASK >> 16); + r0 = IVG15_POS; + [p0] = r0; + raise 15; + p0.l = WAIT_HERE; + p0.h = WAIT_HERE; + reti = p0; + rti; + +WAIT_HERE: + jump WAIT_HERE; + +.global _real_start; +_real_start: + [ -- sp ] = reti; + +#ifdef CONFIG_EZKIT533 + p0.l = (WDOG_CTL & 0xFFFF); + p0.h = (WDOG_CTL >> 16); + r0 = WATCHDOG_DISABLE(z); + w[p0] = r0; +#endif + + /* Code for initializing Async mem banks */ + p2.h = (EBIU_AMBCTL1 >> 16); + p2.l = (EBIU_AMBCTL1 & 0xFFFF); + r0.h = (AMBCTL1VAL >> 16); + r0.l = (AMBCTL1VAL & 0xFFFF); + [p2] = r0; + ssync; + + p2.h = (EBIU_AMBCTL0 >> 16); + p2.l = (EBIU_AMBCTL0 & 0xFFFF); + r0.h = (AMBCTL0VAL >> 16); + r0.l = (AMBCTL0VAL & 0xFFFF); + [p2] = r0; + ssync; + + p2.h = (EBIU_AMGCTL >> 16); + p2.l = (EBIU_AMGCTL & 0xffff); + r0 = AMGCTLVAL; + w[p2] = r0; + ssync; + + /* DMA reset code to Hi of L1 SRAM */ +copy: + P1.H = hi(SYSMMR_BASE); /* P1 Points to the beginning of SYSTEM MMR Space */ + P1.L = lo(SYSMMR_BASE); + + R0.H = reset_start; /* Source Address (high) */ + R0.L = reset_start; /* Source Address (low) */ + R1.H = reset_end; + R1.L = reset_end; + R2 = R1 - R0; /* Count */ + R1.H = hi(L1_ISRAM); /* Destination Address (high) */ + R1.L = lo(L1_ISRAM); /* Destination Address (low) */ + R3.L = DMAEN; /* Source DMAConfig Value (8-bit words) */ + R4.L = (DI_EN | WNR | DMAEN); /* Destination DMAConfig Value (8-bit words) */ + +DMA: + R6 = 0x1 (Z); + W[P1+OFFSET_(MDMA_S0_X_MODIFY)] = R6; /* Source Modify = 1 */ + W[P1+OFFSET_(MDMA_D0_X_MODIFY)] = R6; /* Destination Modify = 1 */ + + [P1+OFFSET_(MDMA_S0_START_ADDR)] = R0; /* Set Source Base Address */ + W[P1+OFFSET_(MDMA_S0_X_COUNT)] = R2; /* Set Source Count */ + /* Set Source DMAConfig = DMA Enable, + Memory Read, 8-Bit Transfers, 1-D DMA, Flow - Stop */ + W[P1+OFFSET_(MDMA_S0_CONFIG)] = R3; + + [P1+OFFSET_(MDMA_D0_START_ADDR)] = R1; /* Set Destination Base Address */ + W[P1+OFFSET_(MDMA_D0_X_COUNT)] = R2; /* Set Destination Count */ + /* Set Destination DMAConfig = DMA Enable, + Memory Write, 8-Bit Transfers, 1-D DMA, Flow - Stop, IOC */ + W[P1+OFFSET_(MDMA_D0_CONFIG)] = R4; + + IDLE; /* Wait for DMA to Complete */ + + R0 = 0x1; + W[P1+OFFSET_(MDMA_D0_IRQ_STATUS)] = R0; /* Write 1 to clear DMA interrupt */ + + /* DMA reset code to DATA BANK A which uses this port + * to avoid following problem + * " Data from a Data Cache fill can be corrupoted after or during + * instruction DMA if certain core stalls exist" + */ + +copy_as_data: + R0.H = reset_start; /* Source Address (high) */ + R0.L = reset_start; /* Source Address (low) */ + R1.H = reset_end; + R1.L = reset_end; + R2 = R1 - R0; /* Count */ + R1.H = hi(DATA_BANKA_SRAM); /* Destination Address (high) */ + R1.L = lo(DATA_BANKA_SRAM); /* Destination Address (low) */ + R3.L = DMAEN; /* Source DMAConfig Value (8-bit words) */ + R4.L = (DI_EN | WNR | DMAEN); /* Destination DMAConfig Value (8-bit words) */ + +DMA_DATA: + R6 = 0x1 (Z); + W[P1+OFFSET_(MDMA_S0_X_MODIFY)] = R6; /* Source Modify = 1 */ + W[P1+OFFSET_(MDMA_D0_X_MODIFY)] = R6; /* Destination Modify = 1 */ + + [P1+OFFSET_(MDMA_S0_START_ADDR)] = R0; /* Set Source Base Address */ + W[P1+OFFSET_(MDMA_S0_X_COUNT)] = R2; /* Set Source Count */ + /* Set Source DMAConfig = DMA Enable, + Memory Read, 8-Bit Transfers, 1-D DMA, Flow - Stop */ + W[P1+OFFSET_(MDMA_S0_CONFIG)] = R3; + + [P1+OFFSET_(MDMA_D0_START_ADDR)] = R1; /* Set Destination Base Address */ + W[P1+OFFSET_(MDMA_D0_X_COUNT)] = R2; /* Set Destination Count */ + /* Set Destination DMAConfig = DMA Enable, + Memory Write, 8-Bit Transfers, 1-D DMA, Flow - Stop, IOC */ + W[P1+OFFSET_(MDMA_D0_CONFIG)] = R4; + + IDLE; /* Wait for DMA to Complete */ + + R0 = 0x1; + W[P1+OFFSET_(MDMA_D0_IRQ_STATUS)] = R0; /* Write 1 to clear DMA interrupt */ + +copy_end: nop; + + /* Initialize BSS Section with 0 s */ + p1.l = __bss_start; + p1.h = __bss_start; + p2.l = _end; + p2.h = _end; + r1 = p1; + r2 = p2; + r3 = r2 - r1; + r3 = r3 >> 2; + p3 = r3; + lsetup (_clear_bss, _clear_bss_end ) lc1 = p3; + CC = p2<=p1; + if CC jump _clear_bss_skip; + r0 = 0; +_clear_bss: +_clear_bss_end: + [p1++] = r0; +_clear_bss_skip: + + p0.l = _start1; + p0.h = _start1; + jump (p0); + +reset_start: + p0.h = WDOG_CNT >> 16; + p0.l = WDOG_CNT & 0xffff; + r0 = 0x0010; + w[p0] = r0; + p0.h = WDOG_CTL >> 16; + p0.l = WDOG_CTL & 0xffff; + r0 = 0x0000; + w[p0] = r0; +reset_wait: + jump reset_wait; + +reset_end: nop; + +_exit: + jump.s _exit; diff --git a/cpu/bf533/start1.S b/cpu/bf533/start1.S new file mode 100644 index 0000000000..6f48124055 --- /dev/null +++ b/cpu/bf533/start1.S @@ -0,0 +1,38 @@ +/* + * U-boot - start1.S Code running out of RAM after relocation + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#define ASSEMBLY +#include +#include +#include + +.global start1; +.global _start1; + +.text +_start1: +start1: + sp += -12; + call board_init_f; + sp += 12; diff --git a/cpu/bf533/traps.c b/cpu/bf533/traps.c new file mode 100644 index 0000000000..37470d583e --- /dev/null +++ b/cpu/bf533/traps.c @@ -0,0 +1,73 @@ +/* + * U-boot - traps.c Routines related to interrupts and exceptions + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * This file is based on + * No original Copyright holder listed, + * Probabily original (C) Roman Zippel (assigned DJD, 1999) + * + * Copyright 2003 Metrowerks - for Blackfin + * Copyright 2000-2001 Lineo, Inc. D. Jeff Dionne + * Copyright 1999-2000 D. Jeff Dionne, + * + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include "cpu.h" + +void init_IRQ(void) +{ + blackfin_init_IRQ(); + return; +} + +void process_int(unsigned long vec, struct pt_regs *fp) +{ + return; +} + +void dump(struct pt_regs *fp) +{ + printf("PC: %08lx\n", fp->pc); + printf("SEQSTAT: %08lx SP: %08lx\n", (long) fp->seqstat, + (long) fp); + printf("R0: %08lx R1: %08lx R2: %08lx R3: %08lx\n", + fp->r0, fp->r1, fp->r2, fp->r3); + printf("R4: %08lx R5: %08lx R6: %08lx R7: %08lx\n", + fp->r4, fp->r5, fp->r6, fp->r7); + printf("P0: %08lx P1: %08lx P2: %08lx P3: %08lx\n", + fp->p0, fp->p1, fp->p2, fp->p3); + printf("P4: %08lx P5: %08lx FP: %08lx\n", fp->p4, fp->p5, + fp->fp); + printf("A0.w: %08lx A0.x: %08lx A1.w: %08lx A1.x: %08lx\n", + fp->a0w, fp->a0x, fp->a1w, fp->a1x); + printf("\n"); +} diff --git a/include/asm-blackfin/bitops.h b/include/asm-blackfin/bitops.h new file mode 100644 index 0000000000..65d2c25345 --- /dev/null +++ b/include/asm-blackfin/bitops.h @@ -0,0 +1,380 @@ +/* + * U-boot - bitops.h Routines for bit operations + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _BLACKFIN_BITOPS_H +#define _BLACKFIN_BITOPS_H + +/* + * Copyright 1992, Linus Torvalds. + */ + +#include +#include +#include + +#ifdef __KERNEL__ +/* + * Function prototypes to keep gcc -Wall happy + */ + +/* + * The __ functions are not atomic + */ + +/* + * ffz = Find First Zero in word. Undefined if no zero exists, + * so code should check against ~0UL first.. + */ +static __inline__ unsigned long ffz(unsigned long word) +{ + unsigned long result = 0; + + while (word & 1) { + result++; + word >>= 1; + } + return result; +} + +static __inline__ void set_bit(int nr, volatile void *addr) +{ + int *a = (int *) addr; + int mask; + unsigned long flags; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + save_and_cli(flags); + *a |= mask; + restore_flags(flags); +} + +static __inline__ void __set_bit(int nr, volatile void *addr) +{ + int *a = (int *) addr; + int mask; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + *a |= mask; +} + +/* + * clear_bit() doesn't provide any barrier for the compiler. + */ +#define smp_mb__before_clear_bit() barrier() +#define smp_mb__after_clear_bit() barrier() + +static __inline__ void clear_bit(int nr, volatile void *addr) +{ + int *a = (int *) addr; + int mask; + unsigned long flags; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + save_and_cli(flags); + *a &= ~mask; + restore_flags(flags); +} + +static __inline__ void change_bit(int nr, volatile void *addr) +{ + int mask, flags; + unsigned long *ADDR = (unsigned long *) addr; + + ADDR += nr >> 5; + mask = 1 << (nr & 31); + save_and_cli(flags); + *ADDR ^= mask; + restore_flags(flags); +} + +static __inline__ void __change_bit(int nr, volatile void *addr) +{ + int mask; + unsigned long *ADDR = (unsigned long *) addr; + + ADDR += nr >> 5; + mask = 1 << (nr & 31); + *ADDR ^= mask; +} + +static __inline__ int test_and_set_bit(int nr, volatile void *addr) +{ + int mask, retval; + volatile unsigned int *a = (volatile unsigned int *) addr; + unsigned long flags; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + save_and_cli(flags); + retval = (mask & *a) != 0; + *a |= mask; + restore_flags(flags); + + return retval; +} + +static __inline__ int __test_and_set_bit(int nr, volatile void *addr) +{ + int mask, retval; + volatile unsigned int *a = (volatile unsigned int *) addr; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + retval = (mask & *a) != 0; + *a |= mask; + return retval; +} + +static __inline__ int test_and_clear_bit(int nr, volatile void *addr) +{ + int mask, retval; + volatile unsigned int *a = (volatile unsigned int *) addr; + unsigned long flags; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + save_and_cli(flags); + retval = (mask & *a) != 0; + *a &= ~mask; + restore_flags(flags); + + return retval; +} + +static __inline__ int __test_and_clear_bit(int nr, volatile void *addr) +{ + int mask, retval; + volatile unsigned int *a = (volatile unsigned int *) addr; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + retval = (mask & *a) != 0; + *a &= ~mask; + return retval; +} + +static __inline__ int test_and_change_bit(int nr, volatile void *addr) +{ + int mask, retval; + volatile unsigned int *a = (volatile unsigned int *) addr; + unsigned long flags; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + save_and_cli(flags); + retval = (mask & *a) != 0; + *a ^= mask; + restore_flags(flags); + + return retval; +} + +static __inline__ int __test_and_change_bit(int nr, volatile void *addr) +{ + int mask, retval; + volatile unsigned int *a = (volatile unsigned int *) addr; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + retval = (mask & *a) != 0; + *a ^= mask; + return retval; +} + +/* + * This routine doesn't need to be atomic. + */ +static __inline__ int __constant_test_bit(int nr, + const volatile void *addr) +{ + return ((1UL << (nr & 31)) & + (((const volatile unsigned int *) addr)[nr >> 5])) != 0; +} + +static __inline__ int __test_bit(int nr, volatile void *addr) +{ + int *a = (int *) addr; + int mask; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + return ((mask & *a) != 0); +} + +#define test_bit(nr,addr) \ +(__builtin_constant_p(nr) ? \ + __constant_test_bit((nr),(addr)) : \ + __test_bit((nr),(addr))) + +#define find_first_zero_bit(addr, size) \ + find_next_zero_bit((addr), (size), 0) + +static __inline__ int find_next_zero_bit(void *addr, int size, int offset) +{ + unsigned long *p = ((unsigned long *) addr) + (offset >> 5); + unsigned long result = offset & ~31UL; + unsigned long tmp; + + if (offset >= size) + return size; + size -= result; + offset &= 31UL; + if (offset) { + tmp = *(p++); + tmp |= ~0UL >> (32 - offset); + if (size < 32) + goto found_first; + if (~tmp) + goto found_middle; + size -= 32; + result += 32; + } + while (size & ~31UL) { + if (~(tmp = *(p++))) + goto found_middle; + result += 32; + size -= 32; + } + if (!size) + return result; + tmp = *p; + + found_first: + tmp |= ~0UL >> size; + found_middle: + return result + ffz(tmp); +} + +/* + * ffs: find first bit set. This is defined the same way as + * the libc and compiler builtin ffs routines, therefore + * differs in spirit from the above ffz (man ffs). + */ + +#define ffs(x) generic_ffs(x) + +/* + * hweightN: returns the hamming weight (i.e. the number + * of bits set) of a N-bit word + */ + +#define hweight32(x) generic_hweight32(x) +#define hweight16(x) generic_hweight16(x) +#define hweight8(x) generic_hweight8(x) + +static __inline__ int ext2_set_bit(int nr, volatile void *addr) +{ + int mask, retval; + unsigned long flags; + volatile unsigned char *ADDR = (unsigned char *) addr; + + ADDR += nr >> 3; + mask = 1 << (nr & 0x07); + save_and_cli(flags); + retval = (mask & *ADDR) != 0; + *ADDR |= mask; + restore_flags(flags); + return retval; +} + +static __inline__ int ext2_clear_bit(int nr, volatile void *addr) +{ + int mask, retval; + unsigned long flags; + volatile unsigned char *ADDR = (unsigned char *) addr; + + ADDR += nr >> 3; + mask = 1 << (nr & 0x07); + save_and_cli(flags); + retval = (mask & *ADDR) != 0; + *ADDR &= ~mask; + restore_flags(flags); + return retval; +} + +static __inline__ int ext2_test_bit(int nr, const volatile void *addr) +{ + int mask; + const volatile unsigned char *ADDR = (const unsigned char *) addr; + + ADDR += nr >> 3; + mask = 1 << (nr & 0x07); + return ((mask & *ADDR) != 0); +} + +#define ext2_find_first_zero_bit(addr, size) \ + ext2_find_next_zero_bit((addr), (size), 0) + +static __inline__ unsigned long ext2_find_next_zero_bit(void *addr, + unsigned long size, + unsigned long + offset) +{ + unsigned long *p = ((unsigned long *) addr) + (offset >> 5); + unsigned long result = offset & ~31UL; + unsigned long tmp; + + if (offset >= size) + return size; + size -= result; + offset &= 31UL; + if (offset) { + tmp = *(p++); + tmp |= ~0UL >> (32 - offset); + if (size < 32) + goto found_first; + if (~tmp) + goto found_middle; + size -= 32; + result += 32; + } + while (size & ~31UL) { + if (~(tmp = *(p++))) + goto found_middle; + result += 32; + size -= 32; + } + if (!size) + return result; + tmp = *p; + + found_first: + tmp |= ~0UL >> size; + found_middle: + return result + ffz(tmp); +} + +/* Bitmap functions for the minix filesystem. */ +#define minix_test_and_set_bit(nr,addr) test_and_set_bit(nr,addr) +#define minix_set_bit(nr,addr) set_bit(nr,addr) +#define minix_test_and_clear_bit(nr,addr) test_and_clear_bit(nr,addr) +#define minix_test_bit(nr,addr) test_bit(nr,addr) +#define minix_find_first_zero_bit(addr,size) find_first_zero_bit(addr,size) + +#endif + +#endif diff --git a/include/asm-blackfin/blackfin.h b/include/asm-blackfin/blackfin.h new file mode 100644 index 0000000000..fbdbf30fa1 --- /dev/null +++ b/include/asm-blackfin/blackfin.h @@ -0,0 +1,46 @@ +/* + * U-boot - blackfin.h + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _BLACKFIN_H_ +#define _BLACKFIN_H_ + +#include +#include + +#ifndef __ASSEMBLY__ +#ifndef ASSEMBLY + +#ifdef SHARED_RESOURCES + #include +#endif +#include + +#endif +#endif + +#include +#include +#include + +#endif diff --git a/include/asm-blackfin/blackfin_defs.h b/include/asm-blackfin/blackfin_defs.h new file mode 100644 index 0000000000..2190215971 --- /dev/null +++ b/include/asm-blackfin/blackfin_defs.h @@ -0,0 +1,83 @@ +/* + * U-boot - blackfin_defs.h + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __BLACKFIN_DEFS_H__ +#define __BLACKFIN_DEFS_H__ + +#define TS_MAGICKEY 0x5a5a5a5a +#define TASK_STATE 0 +#define TASK_FLAGS 4 +#define TASK_PTRACE 24 +#define TASK_BLOCKED 636 +#define TASK_COUNTER 32 +#define TASK_SIGPENDING 8 +#define TASK_NEEDRESCHED 20 +#define TASK_THREAD 600 +#define TASK_MM 44 +#define TASK_ACTIVE_MM 80 +#define THREAD_KSP 0 +#define THREAD_USP 4 +#define THREAD_SR 8 +#define THREAD_ESP0 12 +#define THREAD_PC 16 +#define PT_ORIG_R0 208 +#define PT_R0 204 +#define PT_R1 200 +#define PT_R2 196 +#define PT_R3 192 +#define PT_R4 188 +#define PT_R5 184 +#define PT_R6 180 +#define PT_R7 176 +#define PT_P0 172 +#define PT_P1 168 +#define PT_P2 164 +#define PT_P3 160 +#define PT_P4 156 +#define PT_P5 152 +#define PT_A0w 72 +#define PT_A1w 64 +#define PT_A0x 76 +#define PT_A1x 68 +#define PT_RETS 28 +#define PT_RESERVED 32 +#define PT_ASTAT 36 +#define PT_SEQSTAT 8 +#define PT_PC 24 +#define PT_IPEND 0 +#define PT_USP 144 +#define PT_FP 148 +#define PT_SYSCFG 4 +#define IRQ_HANDLER 0 +#define IRQ_DEVID 8 +#define IRQ_NEXT 16 +#define STAT_IRQ 5148 +#define SIGSEGV 11 +#define SEGV_MAPERR 196609 +#define SIGTRAP 5 +#define PT_PTRACED 1 +#define PT_TRACESYS 2 +#define PT_DTRACE 4 + +#endif diff --git a/include/asm-blackfin/byteorder.h b/include/asm-blackfin/byteorder.h new file mode 100644 index 0000000000..3b4df4e134 --- /dev/null +++ b/include/asm-blackfin/byteorder.h @@ -0,0 +1,40 @@ +/* + * U-boot - byteorder.h + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _BLACKFIN_BYTEORDER_H +#define _BLACKFIN_BYTEORDER_H + +#include + +#if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__) +# define __BYTEORDER_HAS_U64__ +# define __SWAB_64_THRU_32__ +#endif + +#include + +#endif diff --git a/include/asm-blackfin/cplb.h b/include/asm-blackfin/cplb.h new file mode 100644 index 0000000000..7715f645de --- /dev/null +++ b/include/asm-blackfin/cplb.h @@ -0,0 +1,48 @@ +/************************************************************************ + * + * cplb.h + * + * (c) Copyright 2002-2003 Analog Devices, Inc. All rights reserved. + * + ************************************************************************/ + +/* Defines necessary for cplb initialisation routines. */ + +#ifndef _CPLB_H +#define _CPLB_H + +#define CPLB_ENABLE_ICACHE_P 0 +#define CPLB_ENABLE_DCACHE_P 1 +#define CPLB_ENABLE_DCACHE2_P 2 +#define CPLB_ENABLE_CPLBS_P 3 /* Deprecated!*/ +#define CPLB_ENABLE_ICPLBS_P 4 +#define CPLB_ENABLE_DCPLBS_P 5 + +#define CPLB_ENABLE_ICACHE (1< + +#ifndef __ARCH_BFINNOMMU_CPLBTAB_H +#define __ARCH_BFINNOMMU_CPLBTAB_H + +/************************************************************************* + * ICPLB TABLE + *************************************************************************/ + +.data + +/* This table is configurable */ + +.align 4; + +/* Data Attibutes*/ + +#define SDRAM_IGENERIC (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID) +#define SDRAM_IKERNEL (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_LOCK) +#define L1_IMEMORY (PAGE_SIZE_1MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_LOCK) +#define SDRAM_INON_CHBL (PAGE_SIZE_4MB | CPLB_USER_RD | CPLB_VALID) + +/*Use the menuconfig cache policy here - CONFIG_BLKFIN_WT/CONFIG_BLKFIN_WB*/ + +#define ANOMALY_05000158 0x200 +#ifdef CONFIG_BLKFIN_WB /*Write Back Policy */ + #define SDRAM_DGENERIC (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158) + #define SDRAM_DNON_CHBL (PAGE_SIZE_4MB | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_RD | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158) + #define SDRAM_DKERNEL (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_USER_WR | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_VALID | CPLB_LOCK | ANOMALY_05000158) + #define L1_DMEMORY (PAGE_SIZE_4KB | CPLB_L1_CHBL | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158) + #define SDRAM_EBIU (PAGE_SIZE_1MB | CPLB_DIRTY | CPLB_USER_RD | CPLB_USER_WR | CPLB_SUPV_WR | CPLB_VALID | ANOMALY_05000158) + +#else /*Write Through*/ + #define SDRAM_DGENERIC (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_SUPV_WR | CPLB_USER_RD | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158) + #define SDRAM_DNON_CHBL (PAGE_SIZE_4MB | CPLB_WT | CPLB_L1_AOW | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158) + #define SDRAM_DKERNEL (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_USER_RD | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_VALID | CPLB_LOCK | ANOMALY_05000158) + #define L1_DMEMORY (PAGE_SIZE_4KB | CPLB_L1_CHBL | CPLB_L1_AOW | CPLB_WT | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158) + #define SDRAM_EBIU (PAGE_SIZE_1MB | CPLB_WT | CPLB_L1_AOW | CPLB_USER_RD | CPLB_USER_WR | CPLB_SUPV_WR | CPLB_VALID | ANOMALY_05000158) +#endif + +.global icplb_table +icplb_table: +.byte4 0xFFA00000; +.byte4 (L1_IMEMORY); +.byte4 0x00000000; +.byte4 (SDRAM_IKERNEL); /*SDRAM_Page1*/ +.byte4 0x00400000; +.byte4 (SDRAM_IKERNEL); /*SDRAM_Page1*/ +.byte4 0x07C00000; +.byte4 (SDRAM_IKERNEL); /*SDRAM_Page14*/ +.byte4 0x00800000; +.byte4 (SDRAM_IGENERIC); /*SDRAM_Page2*/ +.byte4 0x00C00000; +.byte4 (SDRAM_IGENERIC); /*SDRAM_Page2*/ +.byte4 0x01000000; +.byte4 (SDRAM_IGENERIC); /*SDRAM_Page4*/ +.byte4 0x01400000; +.byte4 (SDRAM_IGENERIC); /*SDRAM_Page5*/ +.byte4 0x01800000; +.byte4 (SDRAM_IGENERIC); /*SDRAM_Page6*/ +.byte4 0x01C00000; +.byte4 (SDRAM_IGENERIC); /*SDRAM_Page7*/ +#ifndef CONFIG_EZKIT /*STAMP Memory regions*/ +.byte4 0x02000000; +.byte4 (SDRAM_IGENERIC); /*SDRAM_Page8*/ +.byte4 0x02400000; +.byte4 (SDRAM_IGENERIC); /*SDRAM_Page9*/ +.byte4 0x02800000; +.byte4 (SDRAM_IGENERIC); /*SDRAM_Page10*/ +.byte4 0x02C00000; +.byte4 (SDRAM_IGENERIC); /*SDRAM_Page11*/ +.byte4 0x03000000; +.byte4 (SDRAM_IGENERIC); /*SDRAM_Page12*/ +.byte4 0x03400000; +.byte4 (SDRAM_IGENERIC); /*SDRAM_Page13*/ +#endif +.byte4 0xffffffff; /* end of section - termination*/ + +.align 4; +.global ipdt_table +ipdt_table: +#ifdef CONFIG_CPLB_INFO +.byte4 0x00000000; +.byte4 (SDRAM_IKERNEL); /*SDRAM_Page0*/ +.byte4 0x00400000; +.byte4 (SDRAM_IKERNEL); /*SDRAM_Page1*/ +#endif +.byte4 0x00800000; +.byte4 (SDRAM_IGENERIC); /*SDRAM_Page2*/ +.byte4 0x00C00000; +.byte4 (SDRAM_IGENERIC); /*SDRAM_Page3*/ +.byte4 0x01000000; +.byte4 (SDRAM_IGENERIC); /*SDRAM_Page4*/ +.byte4 0x01400000; +.byte4 (SDRAM_IGENERIC); /*SDRAM_Page5*/ +.byte4 0x01800000; +.byte4 (SDRAM_IGENERIC); /*SDRAM_Page6*/ +.byte4 0x01C00000; +.byte4 (SDRAM_IGENERIC); /*SDRAM_Page7*/ +#ifndef CONFIG_EZKIT /*STAMP Memory regions*/ +.byte4 0x02000000; +.byte4 (SDRAM_IGENERIC); /*SDRAM_Page8*/ +.byte4 0x02400000; +.byte4 (SDRAM_IGENERIC); /*SDRAM_Page9*/ +.byte4 0x02800000; +.byte4 (SDRAM_IGENERIC); /*SDRAM_Page10*/ +.byte4 0x02C00000; +.byte4 (SDRAM_IGENERIC); /*SDRAM_Page11*/ +.byte4 0x03000000; +.byte4 (SDRAM_IGENERIC); /*SDRAM_Page12*/ +.byte4 0x03400000; +.byte4 (SDRAM_IGENERIC); /*SDRAM_Page13*/ +.byte4 0x03800000; +.byte4 (SDRAM_IGENERIC); /*SDRAM_Page14*/ +.byte4 0x03C00000; +.byte4 (SDRAM_IGENERIC); /*SDRAM_Page15*/ +#endif +.byte4 0x20200000; +.byte4 (SDRAM_EBIU); /* Async Memory Bank 2 (Secnd)*/ +.byte4 0x20100000; +.byte4 (SDRAM_EBIU); /* Async Memory Bank 1 (Prim B)*/ +.byte4 0x20000000; +.byte4 (SDRAM_EBIU); /* Async Memory Bank 0 (Prim A)*/ +.byte4 0x20300000; /*Fix for Network*/ +.byte4 (SDRAM_EBIU); /*Async Memory bank 3*/ + +#ifdef CONFIG_STAMP +.byte4 0x04000000; +.byte4 (SDRAM_IGENERIC); +.byte4 0x04400000; +.byte4 (SDRAM_IGENERIC); +.byte4 0x04800000; +.byte4 (SDRAM_IGENERIC); +.byte4 0x04C00000; +.byte4 (SDRAM_IGENERIC); +.byte4 0x05000000; +.byte4 (SDRAM_IGENERIC); +.byte4 0x05400000; +.byte4 (SDRAM_IGENERIC); +.byte4 0x05800000; +.byte4 (SDRAM_IGENERIC); +.byte4 0x05C00000; +.byte4 (SDRAM_IGENERIC); +.byte4 0x06000000; +.byte4 (SDRAM_IGENERIC); /*SDRAM_Page25*/ +.byte4 0x06400000; +.byte4 (SDRAM_IGENERIC); /*SDRAM_Page26*/ +.byte4 0x06800000; +.byte4 (SDRAM_IGENERIC); /*SDRAM_Page27*/ +.byte4 0x06C00000; +.byte4 (SDRAM_IGENERIC); /*SDRAM_Page28*/ +.byte4 0x07000000; +.byte4 (SDRAM_IGENERIC); /*SDRAM_Page29*/ +.byte4 0x07400000; +.byte4 (SDRAM_IGENERIC); /*SDRAM_Page30*/ +.byte4 0x07800000; +.byte4 (SDRAM_IGENERIC); /*SDRAM_Page31*/ +#ifdef CONFIG_CPLB_INFO +.byte4 0x07C00000; +.byte4 (SDRAM_IKERNEL); /*SDRAM_Page32*/ +#endif +#endif +.byte4 0xffffffff; /* end of section - termination*/ + +/********************************************************************* + * DCPLB TABLE + ********************************************************************/ + +.global dcplb_table +dcplb_table: +.byte4 0x00000000; +.byte4 (SDRAM_DKERNEL); /*SDRAM_Page1*/ +.byte4 0x00400000; +.byte4 (SDRAM_DKERNEL); /*SDRAM_Page1*/ +.byte4 0x07C00000; +.byte4 (SDRAM_DKERNEL); /*SDRAM_Page15*/ +.byte4 0x00800000; +.byte4 (SDRAM_DGENERIC); /*SDRAM_Page2*/ +.byte4 0x00C00000; +.byte4 (SDRAM_DGENERIC); /*SDRAM_Page3*/ +.byte4 0x01000000; +.byte4 (SDRAM_DGENERIC); /*SDRAM_Page4*/ +.byte4 0x01400000; +.byte4 (SDRAM_DGENERIC); /*SDRAM_Page5*/ +.byte4 0x01800000; +.byte4 (SDRAM_DGENERIC); /*SDRAM_Page6*/ +.byte4 0x01C00000; +.byte4 (SDRAM_DGENERIC); /*SDRAM_Page7*/ +#ifndef CONFIG_EZKIT +.byte4 0x02000000; +.byte4 (SDRAM_DGENERIC); /*SDRAM_Page8*/ +.byte4 0x02400000; +.byte4 (SDRAM_DGENERIC); /*SDRAM_Page9*/ +.byte4 0x02800000; +.byte4 (SDRAM_DGENERIC); /*SDRAM_Page10*/ +.byte4 0x02C00000; +.byte4 (SDRAM_DGENERIC); /*SDRAM_Page11*/ +.byte4 0x03000000; +.byte4 (SDRAM_DGENERIC); /*SDRAM_Page12*/ +.byte4 0x03400000; +.byte4 (SDRAM_DGENERIC); /*SDRAM_Page13*/ +.byte4 0x03800000; +.byte4 (SDRAM_DGENERIC); /*SDRAM_Page14*/ +#endif +.byte4 0xffffffff; /*end of section - termination*/ + +/********************************************************************** + * PAGE DESCRIPTOR TABLE + * + **********************************************************************/ + +/* Till here we are discussing about the static memory management model. + * However, the operating envoronments commonly define more CPLB + * descriptors to cover the entire addressable memory than will fit into + * the available on-chip 16 CPLB MMRs. When this happens, the below table + * will be used which will hold all the potentially required CPLB descriptors + * + * This is how Page descriptor Table is implemented in uClinux/Blackfin. + */ +.global dpdt_table +dpdt_table: +#ifdef CONFIG_CPLB_INFO +.byte4 0x00000000; +.byte4 (SDRAM_DKERNEL); /*SDRAM_Page0*/ +.byte4 0x00400000; +.byte4 (SDRAM_DKERNEL); /*SDRAM_Page1*/ +#endif +.byte4 0x00800000; +.byte4 (SDRAM_DGENERIC); /*SDRAM_Page2*/ +.byte4 0x00C00000; +.byte4 (SDRAM_DGENERIC); /*SDRAM_Page3*/ +.byte4 0x01000000; +.byte4 (SDRAM_DGENERIC); /*SDRAM_Page4*/ +.byte4 0x01400000; +.byte4 (SDRAM_DGENERIC); /*SDRAM_Page5*/ +.byte4 0x01800000; +.byte4 (SDRAM_DGENERIC); /*SDRAM_Page6*/ +.byte4 0x01C00000; +.byte4 (SDRAM_DGENERIC); /*SDRAM_Page7*/ + +#ifndef CONFIG_EZKIT +.byte4 0x02000000; +.byte4 (SDRAM_DGENERIC); /*SDRAM_Page8*/ +.byte4 0x02400000; +.byte4 (SDRAM_DGENERIC); /*SDRAM_Page9*/ +.byte4 0x02800000; +.byte4 (SDRAM_DGENERIC); /*SDRAM_Page10*/ +.byte4 0x02C00000; +.byte4 (SDRAM_DGENERIC); /*SDRAM_Page11*/ +.byte4 0x03000000; +.byte4 (SDRAM_DGENERIC); /*SDRAM_Page12*/ +.byte4 0x03400000; +.byte4 (SDRAM_DGENERIC); /*SDRAM_Page13*/ +.byte4 0x03800000; +.byte4 (SDRAM_DGENERIC); /*SDRAM_Page14*/ +.byte4 0x03C00000; +.byte4 (SDRAM_DGENERIC); /*SDRAM_Page15*/ +#endif +.byte4 0x20200000; +.byte4 (SDRAM_EBIU); /* Async Memory Bank 2 (Secnd)*/ +.byte4 0x20100000; +.byte4 (SDRAM_EBIU); /* Async Memory Bank 1 (Prim B)*/ +.byte4 0x20000000; +.byte4 (SDRAM_EBIU); /* Async Memory Bank 0 (Prim A)*/ +.byte4 0x20300000; /*Fix for Network*/ +.byte4 (SDRAM_EBIU); /*Async Memory bank 3*/ + +#ifdef CONFIG_STAMP +.byte4 0x04000000; +.byte4 (SDRAM_DGENERIC); +.byte4 0x04400000; +.byte4 (SDRAM_DGENERIC); +.byte4 0x04800000; +.byte4 (SDRAM_DGENERIC); +.byte4 0x04C00000; +.byte4 (SDRAM_DGENERIC); +.byte4 0x05000000; +.byte4 (SDRAM_DGENERIC); +.byte4 0x05400000; +.byte4 (SDRAM_DGENERIC); +.byte4 0x05800000; +.byte4 (SDRAM_DGENERIC); +.byte4 0x05C00000; +.byte4 (SDRAM_DGENERIC); +.byte4 0x06000000; +.byte4 (SDRAM_DGENERIC); /*SDRAM_Page25*/ +.byte4 0x06400000; +.byte4 (SDRAM_DGENERIC); /*SDRAM_Page26*/ +.byte4 0x06800000; +.byte4 (SDRAM_DGENERIC); /*SDRAM_Page27*/ +.byte4 0x06C00000; +.byte4 (SDRAM_DGENERIC); /*SDRAM_Page28*/ +.byte4 0x07000000; +.byte4 (SDRAM_DGENERIC); /*SDRAM_Page29*/ +.byte4 0x07400000; +.byte4 (SDRAM_DGENERIC); /*SDRAM_Page30*/ +.byte4 0x07800000; +.byte4 (SDRAM_DGENERIC); /*SDRAM_Page31*/ +#ifdef CONFIG_CPLB_INFO +.byte4 0x07C00000; +.byte4 (SDRAM_DKERNEL); /*SDRAM_Page32*/ +#endif +#endif + +.byte4 0xFF900000; +.byte4 (L1_DMEMORY); +.byte4 0xFF901000; +.byte4 (L1_DMEMORY); +.byte4 0xFF902000; +.byte4 (L1_DMEMORY); +.byte4 0xFF903000; +.byte4 (L1_DMEMORY); +.byte4 0xFF904000; +.byte4 (L1_DMEMORY); +.byte4 0xFF905000; +.byte4 (L1_DMEMORY); +.byte4 0xFF906000; +.byte4 (L1_DMEMORY); +.byte4 0xFF907000; +.byte4 (L1_DMEMORY); +.byte4 0xFF800000; +.byte4 (L1_DMEMORY); +.byte4 0xFF801000; +.byte4 (L1_DMEMORY); +.byte4 0xFF802000; +.byte4 (L1_DMEMORY); +.byte4 0xFF803000; +.byte4 (L1_DMEMORY); + +.byte4 0xffffffff; /*end of section - termination*/ + +#ifdef CONFIG_CPLB_INFO +.global ipdt_swapcount_table; /* swapin count first, then swapout count*/ +ipdt_swapcount_table: +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 10 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 20 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 30 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 40 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 50 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 60 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 70 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 80 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 90 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 100 */ + +.global dpdt_swapcount_table; /* swapin count first, then swapout count*/ +dpdt_swapcount_table: +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 10 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 20 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 30 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 40 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 50 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 60 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 70 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 80 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 80 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 100 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 110 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 120 */ + +#endif + +#endif /*__ARCH_BFINNOMMU_CPLBTAB_H*/ diff --git a/include/asm-blackfin/cpu/bf533_irq.h b/include/asm-blackfin/cpu/bf533_irq.h new file mode 100644 index 0000000000..902308a486 --- /dev/null +++ b/include/asm-blackfin/cpu/bf533_irq.h @@ -0,0 +1,137 @@ +/* + * U-boot bf533_irq.h + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * This file is based on + * linux/arch/$(ARCH)/platform/$(PLATFORM)/irq.c + * Changed by HuTao Apr18, 2003 + * + * Copyright was missing when I got the code so took from MIPS arch ...MaTed--- + * Copyright (C) 1994 by Waldorf GMBH, written by Ralf Baechle + * Copyright (C) 1995, 96, 97, 98, 99, 2000, 2001 by Ralf Baechle + * + * Adapted for BlackFin (ADI) by Ted Ma + * Copyright (c) 2002 Arcturus Networks Inc. (www.arcturusnetworks.com) + * Copyright (c) 2002 Lineo, Inc. + * + * Adapted for BlackFin BF533 by Bas Vermeulen + * Copyright (c) 2003 BuyWays B.V. (www.buyways.nl) + + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _BF533_IRQ_H_ +#define _BF533_IRQ_H_ + +/* + * Interrupt source definitions + * Event Source Core Event Name Number + * EMU 0 + * Reset RST 1 + * NMI NMI 2 + * Exception EVX 3 + * Reserved -- 4 + * Hardware Error IVHW 5 + * Core Timer IVTMR 6 + * PLL Wakeup Interrupt IVG7 7 + * DMA Error (generic) IVG7 8 + * PPI Error Interrupt IVG7 9 + * SPORT0 Error Interrupt IVG7 10 + * SPORT1 Error Interrupt IVG7 11 + * SPI Error Interrupt IVG7 12 + * UART Error Interrupt IVG7 13 + * RTC Interrupt IVG8 14 + * DMA0 Interrupt (PPI) IVG8 15 + * DMA1 (SPORT0 RX) IVG9 16 + * DMA2 (SPORT0 TX) IVG9 17 + * DMA3 (SPORT1 RX) IVG9 18 + * DMA4 (SPORT1 TX) IVG9 19 + * DMA5 (PPI) IVG10 20 + * DMA6 (UART RX) IVG10 21 + * DMA7 (UART TX) IVG10 22 + * Timer0 IVG11 23 + * Timer1 IVG11 24 + * Timer2 IVG11 25 + * PF Interrupt A IVG12 26 + * PF Interrupt B IVG12 27 + * DMA8/9 Interrupt IVG13 28 + * DMA10/11 Interrupt IVG13 29 + * Watchdog Timer IVG13 30 + * Software Interrupt 1 IVG14 31 + * Software Interrupt 2 -- + * (lowest priority) IVG15 32 + */ + +/* The ABSTRACT IRQ definitions */ + +/* The first seven of the following are fixed, + * the rest you change if you need to + */ + +#define IRQ_EMU 0 /* Emulation */ +#define IRQ_RST 1 /* reset */ +#define IRQ_NMI 2 /* Non Maskable */ +#define IRQ_EVX 3 /* Exception */ +#define IRQ_UNUSED 4 /* - unused interrupt */ +#define IRQ_HWERR 5 /* Hardware Error */ +#define IRQ_CORETMR 6 /* Core timer */ +#define IRQ_PLL_WAKEUP 7 /* PLL Wakeup Interrupt */ +#define IRQ_DMA_ERROR 8 /* DMA Error (general) */ +#define IRQ_PPI_ERROR 9 /* PPI Error Interrupt */ +#define IRQ_SPORT0_ERROR 10 /* SPORT0 Error Interrupt */ +#define IRQ_SPORT1_ERROR 11 /* SPORT1 Error Interrupt */ +#define IRQ_SPI_ERROR 12 /* SPI Error Interrupt */ +#define IRQ_UART_ERROR 13 /* UART Error Interrupt */ +#define IRQ_RTC 14 /* RTC Interrupt */ +#define IRQ_PPI 15 /* DMA0 Interrupt (PPI) */ +#define IRQ_SPORT0 16 /* DMA1 Interrupt (SPORT0 RX) */ +#define IRQ_SPARE1 17 /* DMA2 Interrupt (SPORT0 TX) */ +#define IRQ_SPORT1 18 /* DMA3 Interrupt (SPORT1 RX) */ +#define IRQ_SPARE2 19 /* DMA4 Interrupt (SPORT1 TX) */ +#define IRQ_SPI 20 /* DMA5 Interrupt (SPI) */ +#define IRQ_UART 21 /* DMA6 Interrupt (UART RX) */ +#define IRQ_SPARE3 22 /* DMA7 Interrupt (UART TX) */ +#define IRQ_TMR0 23 /* Timer 0 */ +#define IRQ_TMR1 24 /* Timer 1 */ +#define IRQ_TMR2 25 /* Timer 2 */ +#define IRQ_PROG_INTA 26 /* Programmable Flags A (8) */ +#define IRQ_PROG_INTB 27 /* Programmable Flags B (8) */ +#define IRQ_MEM_DMA0 28 /* DMA8/9 Interrupt (Memory DMA Stream 0) */ +#define IRQ_MEM_DMA1 29 /* DMA10/11 Interrupt (Memory DMA Stream 1) */ +#define IRQ_WATCH 30 /* Watch Dog Timer */ +#define IRQ_SW_INT1 31 /* Software Int 1 */ +#define IRQ_SW_INT2 32 /* Software Int 2 (reserved for SYSCALL) */ + +#define IRQ_UART_RX_BIT 0x4000 +#define IRQ_UART_TX_BIT 0x8000 +#define IRQ_UART_ERROR_BIT 0x40 + +#define IVG7 7 +#define IVG8 8 +#define IVG9 9 +#define IVG10 10 +#define IVG11 11 +#define IVG12 12 +#define IVG13 13 +#define IVG14 14 +#define IVG15 15 +#define SYS_IRQS 33 + +#endif diff --git a/include/asm-blackfin/cpu/bf533_rtc.h b/include/asm-blackfin/cpu/bf533_rtc.h new file mode 100644 index 0000000000..bc09922a5e --- /dev/null +++ b/include/asm-blackfin/cpu/bf533_rtc.h @@ -0,0 +1,46 @@ +/* + * U-boot - bf533_rtc.h + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _BF533_RTC_H_ +#define _BF533_RTC_H_ + +void rtc_init(void); +void wait_for_complete(void); +void rtc_reset(void); + +#define MIN_TO_SECS(_x_) (60 * _x_) +#define HRS_TO_SECS(_x_) (60 * 60 * _x_) +#define DAYS_TO_SECS(_x_) (24 * 60 * 60 * _x_) + +#define NUM_SECS_IN_DAY (24 * 3600) +#define NUM_SECS_IN_HOUR (3600) +#define NUM_SECS_IN_MIN (60) + +/* Shift values for RTC_STAT register */ +#define DAY_BITS_OFF 17 +#define HOUR_BITS_OFF 12 +#define MIN_BITS_OFF 6 +#define SEC_BITS_OFF 0 + +#endif diff --git a/include/asm-blackfin/cpu/bf533_serial.h b/include/asm-blackfin/cpu/bf533_serial.h new file mode 100644 index 0000000000..d5e162a8f9 --- /dev/null +++ b/include/asm-blackfin/cpu/bf533_serial.h @@ -0,0 +1,79 @@ +/* + * U-boot bf533_serial.h + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + +#ifndef _BF533_SERIAL_H_ +#define _BF533_SERIAL_H_ + +#define BYTE_REF(addr) (*((volatile char*)addr)) +#define HALFWORD_REF(addr) (*((volatile short*)addr)) +#define WORD_REF(addr) (*((volatile long*)addr)) + +#define UART_THR_LO HALFWORD_REF(UART_THR) +#define UART_RBR_LO HALFWORD_REF(UART_RBR) +#define UART_DLL_LO HALFWORD_REF(UART_DLL) +#define UART_IER_LO HALFWORD_REF(UART_IER) +#define UART_IER_ERBFI 0x01 +#define UART_IER_ETBEI 0x02 +#define UART_IER_ELSI 0x04 +#define UART_IER_EDDSI 0x08 + +#define UART_DLH_LO HALFWORD_REF(UART_DLH) +#define UART_IIR_LO HALFWORD_REF(UART_IIR) +#define UART_IIR_NOINT 0x01 +#define UART_IIR_STATUS 0x06 +#define UART_IIR_LSR 0x06 +#define UART_IIR_RBR 0x04 +#define UART_IIR_THR 0x02 +#define UART_IIR_MSR 0x00 + +#define UART_LCR_LO HALFWORD_REF(UART_LCR) +#define UART_LCR_WLS5 0 +#define UART_LCR_WLS6 0x01 +#define UART_LCR_WLS7 0x02 +#define UART_LCR_WLS8 0x03 +#define UART_LCR_STB 0x04 +#define UART_LCR_PEN 0x08 +#define UART_LCR_EPS 0x10 +#define UART_LCR_SP 0x20 +#define UART_LCR_SB 0x40 +#define UART_LCR_DLAB 0x80 + +#define UART_MCR_LO HALFWORD_REF(UART_MCR) + +#define UART_LSR_LO HALFWORD_REF(UART_LSR) +#define UART_LSR_DR 0x01 +#define UART_LSR_OE 0x02 +#define UART_LSR_PE 0x04 +#define UART_LSR_FE 0x08 +#define UART_LSR_BI 0x10 +#define UART_LSR_THRE 0x20 +#define UART_LSR_TEMT 0x40 + +#define UART_MSR_LO HALFWORD_REF(UART_MSR) +#define UART_SCR_LO HALFWORD_REF(UART_SCR) +#define UART_GCTL_LO HALFWORD_REF(UART_GCTL) +#define UART_GCTL_UCEN 0x01 + +#endif diff --git a/include/asm-blackfin/cpu/cdefBF531.h b/include/asm-blackfin/cpu/cdefBF531.h new file mode 100644 index 0000000000..68d841d185 --- /dev/null +++ b/include/asm-blackfin/cpu/cdefBF531.h @@ -0,0 +1,24 @@ +/* + * cdefBF531.h + * + * This file is subject to the terms and conditions of the GNU Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Non-GPL License also available as part of VisualDSP++ + * + * http://www.analog.com/processors/resources/crosscore/visualDspDevSoftware.html + * + * (c) Copyright 2001-2005 Analog Devices, Inc. All rights reserved + * + * This file under source code control, please send bugs or changes to: + * dsptools.support@analog.com + * + */ + +#ifndef _CDEFBF531_H +#define _CDEFBF531_H + +#include + +#endif /* _CDEFBF531_H */ diff --git a/include/asm-blackfin/cpu/cdefBF532.h b/include/asm-blackfin/cpu/cdefBF532.h new file mode 100644 index 0000000000..a4d422f765 --- /dev/null +++ b/include/asm-blackfin/cpu/cdefBF532.h @@ -0,0 +1,398 @@ +/* + * cdefBF532.h + * + * This file is subject to the terms and conditions of the GNU Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Non-GPL License also available as part of VisualDSP++ + * + * http://www.analog.com/processors/resources/crosscore/visualDspDevSoftware.html + * + * (c) Copyright 2001-2005 Analog Devices, Inc. All rights reserved + * + * This file under source code control, please send bugs or changes to: + * dsptools.support@analog.com + * + */ + +#ifndef _CDEF_BF532_H +#define _CDEF_BF532_H + +/* + * #if !defined(__ADSPLPBLACKFIN__) + * #warning cdefBF532.h should only be included for 532 compatible chips. + * #endif + */ + +/* include all Core registers and bit definitions */ +#include + +/* include core specific register pointer definitions */ +#include + +/* Clock and System Control (0xFFC0 0400-0xFFC0 07FF) */ +#define pPLL_CTL ((volatile unsigned short *)PLL_CTL) +#define pPLL_STAT ((volatile unsigned short *)PLL_STAT) +#define pPLL_LOCKCNT ((volatile unsigned short *)PLL_LOCKCNT) +#define pCHIPID ((volatile unsigned long *)CHIPID) +#define pSWRST ((volatile unsigned short *)SWRST) +#define pSYSCR ((volatile unsigned short *)SYSCR) +#define pPLL_DIV ((volatile unsigned short *)PLL_DIV) +#define pVR_CTL ((volatile unsigned short *)VR_CTL) + +/* System Interrupt Controller (0xFFC0 0C00-0xFFC0 0FFF) */ +#define pSIC_IAR0 ((volatile unsigned long *)SIC_IAR0) +#define pSIC_IAR1 ((volatile unsigned long *)SIC_IAR1) +#define pSIC_IAR2 ((volatile unsigned long *)SIC_IAR2) +#define pSIC_IAR3 ((volatile unsigned long *)SIC_IAR3) +#define pSIC_IMASK ((volatile unsigned long *)SIC_IMASK) +#define pSIC_ISR ((volatile unsigned long *)SIC_ISR) +#define pSIC_IWR ((volatile unsigned long *)SIC_IWR) + +/* Watchdog Timer (0xFFC0 1000-0xFFC0 13FF) */ +#define pWDOG_CTL ((volatile unsigned short *)WDOG_CTL) +#define pWDOG_CNT ((volatile unsigned long *)WDOG_CNT) +#define pWDOG_STAT ((volatile unsigned long *)WDOG_STAT) + +/* Real Time Clock (0xFFC0 1400-0xFFC0 17FF) */ +#define pRTC_STAT ((volatile unsigned long *)RTC_STAT) +#define pRTC_ICTL ((volatile unsigned short *)RTC_ICTL) +#define pRTC_ISTAT ((volatile unsigned short *)RTC_ISTAT) +#define pRTC_SWCNT ((volatile unsigned short *)RTC_SWCNT) +#define pRTC_ALARM ((volatile unsigned long *)RTC_ALARM) +#define pRTC_FAST ((volatile unsigned short *)RTC_FAST) +#define pRTC_PREN ((volatile unsigned short *)RTC_PREN) + +/* General Purpose IO (0xFFC0 2400-0xFFC0 27FF) */ +#define pFIO_DIR ((volatile unsigned short *)FIO_DIR) +#define pFIO_FLAG_C ((volatile unsigned short *)FIO_FLAG_C) +#define pFIO_FLAG_S ((volatile unsigned short *)FIO_FLAG_S) +#define pFIO_MASKA_C ((volatile unsigned short *)FIO_MASKA_C) +#define pFIO_MASKA_S ((volatile unsigned short *)FIO_MASKA_S) +#define pFIO_MASKB_C ((volatile unsigned short *)FIO_MASKB_C) +#define pFIO_MASKB_S ((volatile unsigned short *)FIO_MASKB_S) +#define pFIO_POLAR ((volatile unsigned short *)FIO_POLAR) +#define pFIO_EDGE ((volatile unsigned short *)FIO_EDGE) +#define pFIO_BOTH ((volatile unsigned short *)FIO_BOTH) +#define pFIO_INEN ((volatile unsigned short *)FIO_INEN) +#define pFIO_FLAG_D ((volatile unsigned short *)FIO_FLAG_D) +#define pFIO_FLAG_T ((volatile unsigned short *)FIO_FLAG_T) +#define pFIO_MASKA_D ((volatile unsigned short *)FIO_MASKA_D) +#define pFIO_MASKA_T ((volatile unsigned short *)FIO_MASKA_T) +#define pFIO_MASKB_D ((volatile unsigned short *)FIO_MASKB_D) +#define pFIO_MASKB_T ((volatile unsigned short *)FIO_MASKB_T) + +/* DMA Test Registers */ +#define pDMA_CCOMP ((volatile unsigned long *)DMA_CCOMP) +#define pDMA_ACOMP ((volatile unsigned long *)DMA_ACOMP) +#define pDMA_MISR ((volatile unsigned long *)DMA_MISR) +#define pDMA_TCPER ((volatile unsigned short *)DMA_TCPER) +#define pDMA_TCCNT ((volatile unsigned short *)DMA_TCCNT) +#define pDMA_TMODE ((volatile unsigned short *)DMA_TMODE) +#define pDMA_TMCHAN ((volatile unsigned short *)DMA_TMCHAN) +#define pDMA_TMSTAT ((volatile unsigned short *)DMA_TMSTAT) +#define pDMA_TMBD ((volatile unsigned short *)DMA_TMBD) +#define pDMA_TMM0D ((volatile unsigned short *)DMA_TMM0D) +#define pDMA_TMM1D ((volatile unsigned short *)DMA_TMM1D) +#define pDMA_TMMA ((volatile void **)DMA_TMMA) + +/* DMA Controller */ +#define pDMA0_CONFIG ((volatile unsigned short *)DMA0_CONFIG) +#define pDMA0_NEXT_DESC_PTR ((volatile void **)DMA0_NEXT_DESC_PTR) +#define pDMA0_START_ADDR ((volatile void **)DMA0_START_ADDR) +#define pDMA0_X_COUNT ((volatile unsigned short *)DMA0_X_COUNT) +#define pDMA0_Y_COUNT ((volatile unsigned short *)DMA0_Y_COUNT) +#define pDMA0_X_MODIFY ((volatile signed short *)DMA0_X_MODIFY) +#define pDMA0_Y_MODIFY ((volatile signed short *)DMA0_Y_MODIFY) +#define pDMA0_CURR_DESC_PTR ((volatile void **)DMA0_CURR_DESC_PTR) +#define pDMA0_CURR_ADDR ((volatile void **)DMA0_CURR_ADDR) +#define pDMA0_CURR_X_COUNT ((volatile unsigned short *)DMA0_CURR_X_COUNT) +#define pDMA0_CURR_Y_COUNT ((volatile unsigned short *)DMA0_CURR_Y_COUNT) +#define pDMA0_IRQ_STATUS ((volatile unsigned short *)DMA0_IRQ_STATUS) +#define pDMA0_PERIPHERAL_MAP ((volatile unsigned short *)DMA0_PERIPHERAL_MAP) + +#define pDMA1_CONFIG ((volatile unsigned short *)DMA1_CONFIG) +#define pDMA1_NEXT_DESC_PTR ((volatile void **)DMA1_NEXT_DESC_PTR) +#define pDMA1_START_ADDR ((volatile void **)DMA1_START_ADDR) +#define pDMA1_X_COUNT ((volatile unsigned short *)DMA1_X_COUNT) +#define pDMA1_Y_COUNT ((volatile unsigned short *)DMA1_Y_COUNT) +#define pDMA1_X_MODIFY ((volatile signed short *)DMA1_X_MODIFY) +#define pDMA1_Y_MODIFY ((volatile signed short *)DMA1_Y_MODIFY) +#define pDMA1_CURR_DESC_PTR ((volatile void **)DMA1_CURR_DESC_PTR) +#define pDMA1_CURR_ADDR ((volatile void **)DMA1_CURR_ADDR) +#define pDMA1_CURR_X_COUNT ((volatile unsigned short *)DMA1_CURR_X_COUNT) +#define pDMA1_CURR_Y_COUNT ((volatile unsigned short *)DMA1_CURR_Y_COUNT) +#define pDMA1_IRQ_STATUS ((volatile unsigned short *)DMA1_IRQ_STATUS) +#define pDMA1_PERIPHERAL_MAP ((volatile unsigned short *)DMA1_PERIPHERAL_MAP) + +#define pDMA2_CONFIG ((volatile unsigned short *)DMA2_CONFIG) +#define pDMA2_NEXT_DESC_PTR ((volatile void **)DMA2_NEXT_DESC_PTR) +#define pDMA2_START_ADDR ((volatile void **)DMA2_START_ADDR) +#define pDMA2_X_COUNT ((volatile unsigned short *)DMA2_X_COUNT) +#define pDMA2_Y_COUNT ((volatile unsigned short *)DMA2_Y_COUNT) +#define pDMA2_X_MODIFY ((volatile signed short *)DMA2_X_MODIFY) +#define pDMA2_Y_MODIFY ((volatile signed short *)DMA2_Y_MODIFY) +#define pDMA2_CURR_DESC_PTR ((volatile void **)DMA2_CURR_DESC_PTR) +#define pDMA2_CURR_ADDR ((volatile void **)DMA2_CURR_ADDR) +#define pDMA2_CURR_X_COUNT ((volatile unsigned short *)DMA2_CURR_X_COUNT) +#define pDMA2_CURR_Y_COUNT ((volatile unsigned short *)DMA2_CURR_Y_COUNT) +#define pDMA2_IRQ_STATUS ((volatile unsigned short *)DMA2_IRQ_STATUS) +#define pDMA2_PERIPHERAL_MAP ((volatile unsigned short *)DMA2_PERIPHERAL_MAP) + +#define pDMA3_CONFIG ((volatile unsigned short *)DMA3_CONFIG) +#define pDMA3_NEXT_DESC_PTR ((volatile void **)DMA3_NEXT_DESC_PTR) +#define pDMA3_START_ADDR ((volatile void **)DMA3_START_ADDR) +#define pDMA3_X_COUNT ((volatile unsigned short *)DMA3_X_COUNT) +#define pDMA3_Y_COUNT ((volatile unsigned short *)DMA3_Y_COUNT) +#define pDMA3_X_MODIFY ((volatile signed short *)DMA3_X_MODIFY) +#define pDMA3_Y_MODIFY ((volatile signed short *)DMA3_Y_MODIFY) +#define pDMA3_CURR_DESC_PTR ((volatile void **)DMA3_CURR_DESC_PTR) +#define pDMA3_CURR_ADDR ((volatile void **)DMA3_CURR_ADDR) +#define pDMA3_CURR_X_COUNT ((volatile unsigned short *)DMA3_CURR_X_COUNT) +#define pDMA3_CURR_Y_COUNT ((volatile unsigned short *)DMA3_CURR_Y_COUNT) +#define pDMA3_IRQ_STATUS ((volatile unsigned short *)DMA3_IRQ_STATUS) +#define pDMA3_PERIPHERAL_MAP ((volatile unsigned short *)DMA3_PERIPHERAL_MAP) + +#define pDMA4_CONFIG ((volatile unsigned short *)DMA4_CONFIG) +#define pDMA4_NEXT_DESC_PTR ((volatile void **)DMA4_NEXT_DESC_PTR) +#define pDMA4_START_ADDR ((volatile void **)DMA4_START_ADDR) +#define pDMA4_X_COUNT ((volatile unsigned short *)DMA4_X_COUNT) +#define pDMA4_Y_COUNT ((volatile unsigned short *)DMA4_Y_COUNT) +#define pDMA4_X_MODIFY ((volatile signed short *)DMA4_X_MODIFY) +#define pDMA4_Y_MODIFY ((volatile signed short *)DMA4_Y_MODIFY) +#define pDMA4_CURR_DESC_PTR ((volatile void **)DMA4_CURR_DESC_PTR) +#define pDMA4_CURR_ADDR ((volatile void **)DMA4_CURR_ADDR) +#define pDMA4_CURR_X_COUNT ((volatile unsigned short *)DMA4_CURR_X_COUNT) +#define pDMA4_CURR_Y_COUNT ((volatile unsigned short *)DMA4_CURR_Y_COUNT) +#define pDMA4_IRQ_STATUS ((volatile unsigned short *)DMA4_IRQ_STATUS) +#define pDMA4_PERIPHERAL_MAP ((volatile unsigned short *)DMA4_PERIPHERAL_MAP) + +#define pDMA5_CONFIG ((volatile unsigned short *)DMA5_CONFIG) +#define pDMA5_NEXT_DESC_PTR ((volatile void **)DMA5_NEXT_DESC_PTR) +#define pDMA5_START_ADDR ((volatile void **)DMA5_START_ADDR) +#define pDMA5_X_COUNT ((volatile unsigned short *)DMA5_X_COUNT) +#define pDMA5_Y_COUNT ((volatile unsigned short *)DMA5_Y_COUNT) +#define pDMA5_X_MODIFY ((volatile signed short *)DMA5_X_MODIFY) +#define pDMA5_Y_MODIFY ((volatile signed short *)DMA5_Y_MODIFY) +#define pDMA5_CURR_DESC_PTR ((volatile void **)DMA5_CURR_DESC_PTR) +#define pDMA5_CURR_ADDR ((volatile void **)DMA5_CURR_ADDR) +#define pDMA5_CURR_X_COUNT ((volatile unsigned short *)DMA5_CURR_X_COUNT) +#define pDMA5_CURR_Y_COUNT ((volatile unsigned short *)DMA5_CURR_Y_COUNT) +#define pDMA5_IRQ_STATUS ((volatile unsigned short *)DMA5_IRQ_STATUS) +#define pDMA5_PERIPHERAL_MAP ((volatile unsigned short *)DMA5_PERIPHERAL_MAP) + +#define pDMA6_CONFIG ((volatile unsigned short *)DMA6_CONFIG) +#define pDMA6_NEXT_DESC_PTR ((volatile void **)DMA6_NEXT_DESC_PTR) +#define pDMA6_START_ADDR ((volatile void **)DMA6_START_ADDR) +#define pDMA6_X_COUNT ((volatile unsigned short *)DMA6_X_COUNT) +#define pDMA6_Y_COUNT ((volatile unsigned short *)DMA6_Y_COUNT) +#define pDMA6_X_MODIFY ((volatile signed short *)DMA6_X_MODIFY) +#define pDMA6_Y_MODIFY ((volatile signed short *)DMA6_Y_MODIFY) +#define pDMA6_CURR_DESC_PTR ((volatile void **)DMA6_CURR_DESC_PTR) +#define pDMA6_CURR_ADDR ((volatile void **)DMA6_CURR_ADDR) +#define pDMA6_CURR_X_COUNT ((volatile unsigned short *)DMA6_CURR_X_COUNT) +#define pDMA6_CURR_Y_COUNT ((volatile unsigned short *)DMA6_CURR_Y_COUNT) +#define pDMA6_IRQ_STATUS ((volatile unsigned short *)DMA6_IRQ_STATUS) +#define pDMA6_PERIPHERAL_MAP ((volatile unsigned short *)DMA6_PERIPHERAL_MAP) + +#define pDMA7_CONFIG ((volatile unsigned short *)DMA7_CONFIG) +#define pDMA7_NEXT_DESC_PTR ((volatile void **)DMA7_NEXT_DESC_PTR) +#define pDMA7_START_ADDR ((volatile void **)DMA7_START_ADDR) +#define pDMA7_X_COUNT ((volatile unsigned short *)DMA7_X_COUNT) +#define pDMA7_Y_COUNT ((volatile unsigned short *)DMA7_Y_COUNT) +#define pDMA7_X_MODIFY ((volatile signed short *)DMA7_X_MODIFY) +#define pDMA7_Y_MODIFY ((volatile signed short *)DMA7_Y_MODIFY) +#define pDMA7_CURR_DESC_PTR ((volatile void **)DMA7_CURR_DESC_PTR) +#define pDMA7_CURR_ADDR ((volatile void **)DMA7_CURR_ADDR) +#define pDMA7_CURR_X_COUNT ((volatile unsigned short *)DMA7_CURR_X_COUNT) +#define pDMA7_CURR_Y_COUNT ((volatile unsigned short *)DMA7_CURR_Y_COUNT) +#define pDMA7_IRQ_STATUS ((volatile unsigned short *)DMA7_IRQ_STATUS) +#define pDMA7_PERIPHERAL_MAP ((volatile unsigned short *)DMA7_PERIPHERAL_MAP) + +#define pMDMA_D1_CONFIG ((volatile unsigned short *)MDMA_D1_CONFIG) +#define pMDMA_D1_NEXT_DESC_PTR ((volatile void **)MDMA_D1_NEXT_DESC_PTR) +#define pMDMA_D1_START_ADDR ((volatile void **)MDMA_D1_START_ADDR) +#define pMDMA_D1_X_COUNT ((volatile unsigned short *)MDMA_D1_X_COUNT) +#define pMDMA_D1_Y_COUNT ((volatile unsigned short *)MDMA_D1_Y_COUNT) +#define pMDMA_D1_X_MODIFY ((volatile signed short *)MDMA_D1_X_MODIFY) +#define pMDMA_D1_Y_MODIFY ((volatile signed short *)MDMA_D1_Y_MODIFY) +#define pMDMA_D1_CURR_DESC_PTR ((volatile void **)MDMA_D1_CURR_DESC_PTR) +#define pMDMA_D1_CURR_ADDR ((volatile void **)MDMA_D1_CURR_ADDR) +#define pMDMA_D1_CURR_X_COUNT ((volatile unsigned short *)MDMA_D1_CURR_X_COUNT) +#define pMDMA_D1_CURR_Y_COUNT ((volatile unsigned short *)MDMA_D1_CURR_Y_COUNT) +#define pMDMA_D1_IRQ_STATUS ((volatile unsigned short *)MDMA_D1_IRQ_STATUS) +#define pMDMA_D1_PERIPHERAL_MAP ((volatile unsigned short *)MDMA_D1_PERIPHERAL_MAP) + +#define pMDMA_S1_CONFIG ((volatile unsigned short *)MDMA_S1_CONFIG) +#define pMDMA_S1_NEXT_DESC_PTR ((volatile void **)MDMA_S1_NEXT_DESC_PTR) +#define pMDMA_S1_START_ADDR ((volatile void **)MDMA_S1_START_ADDR) +#define pMDMA_S1_X_COUNT ((volatile unsigned short *)MDMA_S1_X_COUNT) +#define pMDMA_S1_Y_COUNT ((volatile unsigned short *)MDMA_S1_Y_COUNT) +#define pMDMA_S1_X_MODIFY ((volatile signed short *)MDMA_S1_X_MODIFY) +#define pMDMA_S1_Y_MODIFY ((volatile signed short *)MDMA_S1_Y_MODIFY) +#define pMDMA_S1_CURR_DESC_PTR ((volatile void **)MDMA_S1_CURR_DESC_PTR) +#define pMDMA_S1_CURR_ADDR ((volatile void **)MDMA_S1_CURR_ADDR) +#define pMDMA_S1_CURR_X_COUNT ((volatile unsigned short *)MDMA_S1_CURR_X_COUNT) +#define pMDMA_S1_CURR_Y_COUNT ((volatile unsigned short *)MDMA_S1_CURR_Y_COUNT) +#define pMDMA_S1_IRQ_STATUS ((volatile unsigned short *)MDMA_S1_IRQ_STATUS) +#define pMDMA_S1_PERIPHERAL_MAP ((volatile unsigned short *)MDMA_S1_PERIPHERAL_MAP) + +#define pMDMA_D0_CONFIG ((volatile unsigned short *)MDMA_D0_CONFIG) +#define pMDMA_D0_NEXT_DESC_PTR ((volatile void **)MDMA_D0_NEXT_DESC_PTR) +#define pMDMA_D0_START_ADDR ((volatile void **)MDMA_D0_START_ADDR) +#define pMDMA_D0_X_COUNT ((volatile unsigned short *)MDMA_D0_X_COUNT) +#define pMDMA_D0_Y_COUNT ((volatile unsigned short *)MDMA_D0_Y_COUNT) +#define pMDMA_D0_X_MODIFY ((volatile signed short *)MDMA_D0_X_MODIFY) +#define pMDMA_D0_Y_MODIFY ((volatile signed short *)MDMA_D0_Y_MODIFY) +#define pMDMA_D0_CURR_DESC_PTR ((volatile void **)MDMA_D0_CURR_DESC_PTR) +#define pMDMA_D0_CURR_ADDR ((volatile void **)MDMA_D0_CURR_ADDR) +#define pMDMA_D0_CURR_X_COUNT ((volatile unsigned short *)MDMA_D0_CURR_X_COUNT) +#define pMDMA_D0_CURR_Y_COUNT ((volatile unsigned short *)MDMA_D0_CURR_Y_COUNT) +#define pMDMA_D0_IRQ_STATUS ((volatile unsigned short *)MDMA_D0_IRQ_STATUS) +#define pMDMA_D0_PERIPHERAL_MAP ((volatile unsigned short *)MDMA_D0_PERIPHERAL_MAP) + +#define pMDMA_S0_CONFIG ((volatile unsigned short *)MDMA_S0_CONFIG) +#define pMDMA_S0_NEXT_DESC_PTR ((volatile void **)MDMA_S0_NEXT_DESC_PTR) +#define pMDMA_S0_START_ADDR ((volatile void **)MDMA_S0_START_ADDR) +#define pMDMA_S0_X_COUNT ((volatile unsigned short *)MDMA_S0_X_COUNT) +#define pMDMA_S0_Y_COUNT ((volatile unsigned short *)MDMA_S0_Y_COUNT) +#define pMDMA_S0_X_MODIFY ((volatile signed short *)MDMA_S0_X_MODIFY) +#define pMDMA_S0_Y_MODIFY ((volatile signed short *)MDMA_S0_Y_MODIFY) +#define pMDMA_S0_CURR_DESC_PTR ((volatile void **)MDMA_S0_CURR_DESC_PTR) +#define pMDMA_S0_CURR_ADDR ((volatile void **)MDMA_S0_CURR_ADDR) +#define pMDMA_S0_CURR_X_COUNT ((volatile unsigned short *)MDMA_S0_CURR_X_COUNT) +#define pMDMA_S0_CURR_Y_COUNT ((volatile unsigned short *)MDMA_S0_CURR_Y_COUNT) +#define pMDMA_S0_IRQ_STATUS ((volatile unsigned short *)MDMA_S0_IRQ_STATUS) +#define pMDMA_S0_PERIPHERAL_MAP ((volatile unsigned short *)MDMA_S0_PERIPHERAL_MAP) + +/* Aysnchronous Memory Controller - External Bus Interface Unit (0xFFC0 3C00-0xFFC0 3FFF) */ +#define pEBIU_AMGCTL ((volatile unsigned short *)EBIU_AMGCTL) +#define pEBIU_AMBCTL0 ((volatile unsigned long *)EBIU_AMBCTL0) +#define pEBIU_AMBCTL1 ((volatile unsigned long *)EBIU_AMBCTL1) + +/* System Bus Interface Unit (0xFFC0 4800-0xFFC0 4FFF) */ +/* #define L1SBAR 0xFFC04840 */ /* L1 SRAM Base Address Register */ +/* #define L1CSR 0xFFC04844 */ /* L1 SRAM Control Initialization Register */ + +/* + * #define pDB_ACOMP ((volatile void **)DB_ACOMP) + * #define pDB_CCOMP ((volatile unsigned long *)DB_CCOMP) + */ + +/* SDRAM Controller External Bus Interface Unit (0xFFC0 4C00-0xFFC0 4FFF) */ +#define pEBIU_SDGCTL ((volatile unsigned long *)EBIU_SDGCTL) +#define pEBIU_SDRRC ((volatile unsigned short *)EBIU_SDRRC) +#define pEBIU_SDSTAT ((volatile unsigned short *)EBIU_SDSTAT) +#define pEBIU_SDBCTL ((volatile unsigned short *)EBIU_SDBCTL) + +/* UART Controller */ +#define pUART_THR ((volatile unsigned short *)UART_THR) +#define pUART_RBR ((volatile unsigned short *)UART_RBR) +#define pUART_DLL ((volatile unsigned short *)UART_DLL) +#define pUART_IER ((volatile unsigned short *)UART_IER) +#define pUART_DLH ((volatile unsigned short *)UART_DLH) +#define pUART_IIR ((volatile unsigned short *)UART_IIR) +#define pUART_LCR ((volatile unsigned short *)UART_LCR) +#define pUART_MCR ((volatile unsigned short *)UART_MCR) +#define pUART_LSR ((volatile unsigned short *)UART_LSR) + +/* + * #define UART_MSR + */ +#define pUART_SCR ((volatile unsigned short *)UART_SCR) +#define pUART_GCTL ((volatile unsigned short *)UART_GCTL) + +/* SPI Controller */ +#define pSPI_CTL ((volatile unsigned short *)SPI_CTL) +#define pSPI_FLG ((volatile unsigned short *)SPI_FLG) +#define pSPI_STAT ((volatile unsigned short *)SPI_STAT) +#define pSPI_TDBR ((volatile unsigned short *)SPI_TDBR) +#define pSPI_RDBR ((volatile unsigned short *)SPI_RDBR) +#define pSPI_BAUD ((volatile unsigned short *)SPI_BAUD) +#define pSPI_SHADOW ((volatile unsigned short *)SPI_SHADOW) + +/* TIMER 0, 1, 2 Registers */ +#define pTIMER0_CONFIG ((volatile unsigned short *)TIMER0_CONFIG) +#define pTIMER0_COUNTER ((volatile unsigned long *)TIMER0_COUNTER) +#define pTIMER0_PERIOD ((volatile unsigned long *)TIMER0_PERIOD) +#define pTIMER0_WIDTH ((volatile unsigned long *)TIMER0_WIDTH) + +#define pTIMER1_CONFIG ((volatile unsigned short *)TIMER1_CONFIG) +#define pTIMER1_COUNTER ((volatile unsigned long *)TIMER1_COUNTER) +#define pTIMER1_PERIOD ((volatile unsigned long *)TIMER1_PERIOD) +#define pTIMER1_WIDTH ((volatile unsigned long *)TIMER1_WIDTH) + +#define pTIMER2_CONFIG ((volatile unsigned short *)TIMER2_CONFIG) +#define pTIMER2_COUNTER ((volatile unsigned long *)TIMER2_COUNTER) +#define pTIMER2_PERIOD ((volatile unsigned long *)TIMER2_PERIOD) +#define pTIMER2_WIDTH ((volatile unsigned long *)TIMER2_WIDTH) + +#define pTIMER_ENABLE ((volatile unsigned short *)TIMER_ENABLE) +#define pTIMER_DISABLE ((volatile unsigned short *)TIMER_DISABLE) +#define pTIMER_STATUS ((volatile unsigned short *)TIMER_STATUS) + +/* SPORT0 Controller */ +#define pSPORT0_TCR1 ((volatile unsigned short *)SPORT0_TCR1) +#define pSPORT0_TCR2 ((volatile unsigned short *)SPORT0_TCR2) +#define pSPORT0_TCLKDIV ((volatile unsigned short *)SPORT0_TCLKDIV) +#define pSPORT0_TFSDIV ((volatile unsigned short *)SPORT0_TFSDIV) +#define pSPORT0_TX ((volatile long *)SPORT0_TX) +#define pSPORT0_RX ((volatile long *)SPORT0_RX) +#define pSPORT0_TX32 ((volatile long *)SPORT0_TX) +#define pSPORT0_RX32 ((volatile long *)SPORT0_RX) +#define pSPORT0_TX16 ((volatile unsigned short *)SPORT0_TX) +#define pSPORT0_RX16 ((volatile unsigned short *)SPORT0_RX) +#define pSPORT0_RCR1 ((volatile unsigned short *)SPORT0_RCR1) +#define pSPORT0_RCR2 ((volatile unsigned short *)SPORT0_RCR2) +#define pSPORT0_RCLKDIV ((volatile unsigned short *)SPORT0_RCLKDIV) +#define pSPORT0_RFSDIV ((volatile unsigned short *)SPORT0_RFSDIV) +#define pSPORT0_STAT ((volatile unsigned short *)SPORT0_STAT) +#define pSPORT0_CHNL ((volatile unsigned short *)SPORT0_CHNL) +#define pSPORT0_MCMC1 ((volatile unsigned short *)SPORT0_MCMC1) +#define pSPORT0_MCMC2 ((volatile unsigned short *)SPORT0_MCMC2) +#define pSPORT0_MTCS0 ((volatile unsigned long *)SPORT0_MTCS0) +#define pSPORT0_MTCS1 ((volatile unsigned long *)SPORT0_MTCS1) +#define pSPORT0_MTCS2 ((volatile unsigned long *)SPORT0_MTCS2) +#define pSPORT0_MTCS3 ((volatile unsigned long *)SPORT0_MTCS3) +#define pSPORT0_MRCS0 ((volatile unsigned long *)SPORT0_MRCS0) +#define pSPORT0_MRCS1 ((volatile unsigned long *)SPORT0_MRCS1) +#define pSPORT0_MRCS2 ((volatile unsigned long *)SPORT0_MRCS2) +#define pSPORT0_MRCS3 ((volatile unsigned long *)SPORT0_MRCS3) + +/* SPORT1 Controller */ +#define pSPORT1_TCR1 ((volatile unsigned short *)SPORT1_TCR1) +#define pSPORT1_TCR2 ((volatile unsigned short *)SPORT1_TCR2) +#define pSPORT1_TCLKDIV ((volatile unsigned short *)SPORT1_TCLKDIV) +#define pSPORT1_TFSDIV ((volatile unsigned short *)SPORT1_TFSDIV) +#define pSPORT1_TX ((volatile long *)SPORT1_TX) +#define pSPORT1_RX ((volatile long *)SPORT1_RX) +#define pSPORT1_TX32 ((volatile long *)SPORT1_TX) +#define pSPORT1_RX32 ((volatile long *)SPORT1_RX) +#define pSPORT1_TX16 ((volatile unsigned short *)SPORT1_TX) +#define pSPORT1_RX16 ((volatile unsigned short *)SPORT1_RX) +#define pSPORT1_RCR1 ((volatile unsigned short *)SPORT1_RCR1) +#define pSPORT1_RCR2 ((volatile unsigned short *)SPORT1_RCR2) +#define pSPORT1_RCLKDIV ((volatile unsigned short *)SPORT1_RCLKDIV) +#define pSPORT1_RFSDIV ((volatile unsigned short *)SPORT1_RFSDIV) +#define pSPORT1_STAT ((volatile unsigned short *)SPORT1_STAT) +#define pSPORT1_CHNL ((volatile unsigned short *)SPORT1_CHNL) +#define pSPORT1_MCMC1 ((volatile unsigned short *)SPORT1_MCMC1) +#define pSPORT1_MCMC2 ((volatile unsigned short *)SPORT1_MCMC2) +#define pSPORT1_MTCS0 ((volatile unsigned long *)SPORT1_MTCS0) +#define pSPORT1_MTCS1 ((volatile unsigned long *)SPORT1_MTCS1) +#define pSPORT1_MTCS2 ((volatile unsigned long *)SPORT1_MTCS2) +#define pSPORT1_MTCS3 ((volatile unsigned long *)SPORT1_MTCS3) +#define pSPORT1_MRCS0 ((volatile unsigned long *)SPORT1_MRCS0) +#define pSPORT1_MRCS1 ((volatile unsigned long *)SPORT1_MRCS1) +#define pSPORT1_MRCS2 ((volatile unsigned long *)SPORT1_MRCS2) +#define pSPORT1_MRCS3 ((volatile unsigned long *)SPORT1_MRCS3) + +/* Parallel Peripheral Interface (PPI) */ +#define pPPI_CONTROL ((volatile unsigned short *)PPI_CONTROL) +#define pPPI_STATUS ((volatile unsigned short *)PPI_STATUS) +#define pPPI_DELAY ((volatile unsigned short *)PPI_DELAY) +#define pPPI_COUNT ((volatile unsigned short *)PPI_COUNT) +#define pPPI_FRAME ((volatile unsigned short *)PPI_FRAME) + +#endif /* _CDEF_BF532_H */ diff --git a/include/asm-blackfin/cpu/cdefBF533.h b/include/asm-blackfin/cpu/cdefBF533.h new file mode 100644 index 0000000000..8c751e6073 --- /dev/null +++ b/include/asm-blackfin/cpu/cdefBF533.h @@ -0,0 +1,24 @@ +/* + * cdefBF533.h + * + * This file is subject to the terms and conditions of the GNU Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Non-GPL License also available as part of VisualDSP++ + * + * http://www.analog.com/processors/resources/crosscore/visualDspDevSoftware.html + * + * (c) Copyright 2001-2005 Analog Devices, Inc. All rights reserved + * + * This file under source code control, please send bugs or changes to: + * dsptools.support@analog.com + * + */ + +#ifndef _CDEFBF533_H +#define _CDEFBF533_H + +#include + +#endif /* _CDEFBF533_H */ diff --git a/include/asm-blackfin/cpu/cdefBF53x.h b/include/asm-blackfin/cpu/cdefBF53x.h new file mode 100644 index 0000000000..db4eaa9cf2 --- /dev/null +++ b/include/asm-blackfin/cpu/cdefBF53x.h @@ -0,0 +1,32 @@ +/************************************************************************ + * + * cdefBF53x.h + * + * (c) Copyright 2002-2003 Analog Devices, Inc. All rights reserved. + * + ************************************************************************/ + +#ifndef _CDEFBF53x_H +#define _CDEFBF53x_H + +#if defined(__ADSPBF531__) + #include +#elif defined(__ADSPBF532__) + #include +#elif defined(__ADSPBF533__) + #include +#elif defined(__ADSPBF561__) + #include +#elif defined(__ADSPBF535__) + #include +#elif defined(__AD6532__) + #include +#else + #if defined(__ADSPLPBLACKFIN__) + #include + #else + #include + #endif +#endif + +#endif /* _CDEFBF53x_H */ diff --git a/include/asm-blackfin/cpu/cdef_LPBlackfin.h b/include/asm-blackfin/cpu/cdef_LPBlackfin.h new file mode 100644 index 0000000000..e6471cbcb3 --- /dev/null +++ b/include/asm-blackfin/cpu/cdef_LPBlackfin.h @@ -0,0 +1,185 @@ +/* + * cdef_LPBlackfin.h + * + * This file is subject to the terms and conditions of the GNU Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Non-GPL License also available as part of VisualDSP++ + * + * http://www.analog.com/processors/resources/crosscore/visualDspDevSoftware.html + * + * (c) Copyright 2001-2005 Analog Devices, Inc. All rights reserved + * + * This file under source code control, please send bugs or changes to: + * dsptools.support@analog.com + * + */ + +#ifndef _CDEF_LPBLACKFIN_H +#define _CDEF_LPBLACKFIN_H + +/* + * #if !defined(__ADSPLPBLACKFIN__) + * #warning cdef_LPBlackfin.h should only be included for 532 compatible chips. + * #endif + */ +#include + +/* Cache & SRAM Memory */ +#define pSRAM_BASE_ADDRESS ((volatile void **)SRAM_BASE_ADDRESS) +#define pDMEM_CONTROL ((volatile unsigned long *)DMEM_CONTROL) +#define pDCPLB_STATUS ((volatile unsigned long *)DCPLB_STATUS) +#define pDCPLB_FAULT_ADDR ((volatile void **)DCPLB_FAULT_ADDR) + +/* #define MMR_TIMEOUT 0xFFE00010 */ /* Memory-Mapped Register Timeout Register */ +#define pDCPLB_ADDR0 ((volatile void **)DCPLB_ADDR0) +#define pDCPLB_ADDR1 ((volatile void **)DCPLB_ADDR1) +#define pDCPLB_ADDR2 ((volatile void **)DCPLB_ADDR2) +#define pDCPLB_ADDR3 ((volatile void **)DCPLB_ADDR3) +#define pDCPLB_ADDR4 ((volatile void **)DCPLB_ADDR4) +#define pDCPLB_ADDR5 ((volatile void **)DCPLB_ADDR5) +#define pDCPLB_ADDR6 ((volatile void **)DCPLB_ADDR6) +#define pDCPLB_ADDR7 ((volatile void **)DCPLB_ADDR7) +#define pDCPLB_ADDR8 ((volatile void **)DCPLB_ADDR8) +#define pDCPLB_ADDR9 ((volatile void **)DCPLB_ADDR9) +#define pDCPLB_ADDR10 ((volatile void **)DCPLB_ADDR10) +#define pDCPLB_ADDR11 ((volatile void **)DCPLB_ADDR11) +#define pDCPLB_ADDR12 ((volatile void **)DCPLB_ADDR12) +#define pDCPLB_ADDR13 ((volatile void **)DCPLB_ADDR13) +#define pDCPLB_ADDR14 ((volatile void **)DCPLB_ADDR14) +#define pDCPLB_ADDR15 ((volatile void **)DCPLB_ADDR15) +#define pDCPLB_DATA0 ((volatile unsigned long *)DCPLB_DATA0) +#define pDCPLB_DATA1 ((volatile unsigned long *)DCPLB_DATA1) +#define pDCPLB_DATA2 ((volatile unsigned long *)DCPLB_DATA2) +#define pDCPLB_DATA3 ((volatile unsigned long *)DCPLB_DATA3) +#define pDCPLB_DATA4 ((volatile unsigned long *)DCPLB_DATA4) +#define pDCPLB_DATA5 ((volatile unsigned long *)DCPLB_DATA5) +#define pDCPLB_DATA6 ((volatile unsigned long *)DCPLB_DATA6) +#define pDCPLB_DATA7 ((volatile unsigned long *)DCPLB_DATA7) +#define pDCPLB_DATA8 ((volatile unsigned long *)DCPLB_DATA8) +#define pDCPLB_DATA9 ((volatile unsigned long *)DCPLB_DATA9) +#define pDCPLB_DATA10 ((volatile unsigned long *)DCPLB_DATA10) +#define pDCPLB_DATA11 ((volatile unsigned long *)DCPLB_DATA11) +#define pDCPLB_DATA12 ((volatile unsigned long *)DCPLB_DATA12) +#define pDCPLB_DATA13 ((volatile unsigned long *)DCPLB_DATA13) +#define pDCPLB_DATA14 ((volatile unsigned long *)DCPLB_DATA14) +#define pDCPLB_DATA15 ((volatile unsigned long *)DCPLB_DATA15) +#define pDTEST_COMMAND ((volatile unsigned long *)DTEST_COMMAND) + +/* #define DTEST_INDEX 0xFFE00304 */ /* Data Test Index Register */ +#define pDTEST_DATA0 ((volatile unsigned long *)DTEST_DATA0) +#define pDTEST_DATA1 ((volatile unsigned long *)DTEST_DATA1) + +/* + * # define DTEST_DATA2 0xFFE00408 Data Test Data Register + * #define DTEST_DATA3 0xFFE0040C Data Test Data Register + */ +#define pIMEM_CONTROL ((volatile unsigned long *)IMEM_CONTROL) +#define pICPLB_STATUS ((volatile unsigned long *)ICPLB_STATUS) +#define pICPLB_FAULT_ADDR ((volatile void **)ICPLB_FAULT_ADDR) +#define pICPLB_ADDR0 ((volatile void **)ICPLB_ADDR0) +#define pICPLB_ADDR1 ((volatile void **)ICPLB_ADDR1) +#define pICPLB_ADDR2 ((volatile void **)ICPLB_ADDR2) +#define pICPLB_ADDR3 ((volatile void **)ICPLB_ADDR3) +#define pICPLB_ADDR4 ((volatile void **)ICPLB_ADDR4) +#define pICPLB_ADDR5 ((volatile void **)ICPLB_ADDR5) +#define pICPLB_ADDR6 ((volatile void **)ICPLB_ADDR6) +#define pICPLB_ADDR7 ((volatile void **)ICPLB_ADDR7) +#define pICPLB_ADDR8 ((volatile void **)ICPLB_ADDR8) +#define pICPLB_ADDR9 ((volatile void **)ICPLB_ADDR9) +#define pICPLB_ADDR10 ((volatile void **)ICPLB_ADDR10) +#define pICPLB_ADDR11 ((volatile void **)ICPLB_ADDR11) +#define pICPLB_ADDR12 ((volatile void **)ICPLB_ADDR12) +#define pICPLB_ADDR13 ((volatile void **)ICPLB_ADDR13) +#define pICPLB_ADDR14 ((volatile void **)ICPLB_ADDR14) +#define pICPLB_ADDR15 ((volatile void **)ICPLB_ADDR15) +#define pICPLB_DATA0 ((volatile unsigned long *)ICPLB_DATA0) +#define pICPLB_DATA1 ((volatile unsigned long *)ICPLB_DATA1) +#define pICPLB_DATA2 ((volatile unsigned long *)ICPLB_DATA2) +#define pICPLB_DATA3 ((volatile unsigned long *)ICPLB_DATA3) +#define pICPLB_DATA4 ((volatile unsigned long *)ICPLB_DATA4) +#define pICPLB_DATA5 ((volatile unsigned long *)ICPLB_DATA5) +#define pICPLB_DATA6 ((volatile unsigned long *)ICPLB_DATA6) +#define pICPLB_DATA7 ((volatile unsigned long *)ICPLB_DATA7) +#define pICPLB_DATA8 ((volatile unsigned long *)ICPLB_DATA8) +#define pICPLB_DATA9 ((volatile unsigned long *)ICPLB_DATA9) +#define pICPLB_DATA10 ((volatile unsigned long *)ICPLB_DATA10) +#define pICPLB_DATA11 ((volatile unsigned long *)ICPLB_DATA11) +#define pICPLB_DATA12 ((volatile unsigned long *)ICPLB_DATA12) +#define pICPLB_DATA13 ((volatile unsigned long *)ICPLB_DATA13) +#define pICPLB_DATA14 ((volatile unsigned long *)ICPLB_DATA14) +#define pICPLB_DATA15 ((volatile unsigned long *)ICPLB_DATA15) +#define pITEST_COMMAND ((volatile unsigned long *)ITEST_COMMAND) + +/* #define ITEST_INDEX 0xFFE01304 */ /* Instruction Test Index Register */ +#define pITEST_DATA0 ((volatile unsigned long *)ITEST_DATA0) +#define pITEST_DATA1 ((volatile unsigned long *)ITEST_DATA1) + +/* Event/Interrupt Registers */ +#define pEVT0 ((volatile void **)EVT0) +#define pEVT1 ((volatile void **)EVT1) +#define pEVT2 ((volatile void **)EVT2) +#define pEVT3 ((volatile void **)EVT3) +#define pEVT4 ((volatile void **)EVT4) +#define pEVT5 ((volatile void **)EVT5) +#define pEVT6 ((volatile void **)EVT6) +#define pEVT7 ((volatile void **)EVT7) +#define pEVT8 ((volatile void **)EVT8) +#define pEVT9 ((volatile void **)EVT9) +#define pEVT10 ((volatile void **)EVT10) +#define pEVT11 ((volatile void **)EVT11) +#define pEVT12 ((volatile void **)EVT12) +#define pEVT13 ((volatile void **)EVT13) +#define pEVT14 ((volatile void **)EVT14) +#define pEVT15 ((volatile void **)EVT15) +#define pIMASK ((volatile unsigned long *)IMASK) +#define pIPEND ((volatile unsigned long *)IPEND) +#define pILAT ((volatile unsigned long *)ILAT) + +/* Core Timer Registers */ +#define pTCNTL ((volatile unsigned long *)TCNTL) +#define pTPERIOD ((volatile unsigned long *)TPERIOD) +#define pTSCALE ((volatile unsigned long *)TSCALE) +#define pTCOUNT ((volatile unsigned long *)TCOUNT) + +/* Debug/MP/Emulation Registers */ +#define pDSPID ((volatile unsigned long *)DSPID) +#define pDBGCTL ((volatile unsigned long *)DBGCTL) +#define pDBGSTAT ((volatile unsigned long *)DBGSTAT) +#define pEMUDAT ((volatile unsigned long *)EMUDAT) + +/* Trace Buffer Registers */ +#define pTBUFCTL ((volatile unsigned long *)TBUFCTL) +#define pTBUFSTAT ((volatile unsigned long *)TBUFSTAT) +#define pTBUF ((volatile void **)TBUF) + +/* Watch Point Control Registers */ +#define pWPIACTL ((volatile unsigned long *)WPIACTL) +#define pWPIA0 ((volatile void **)WPIA0) +#define pWPIA1 ((volatile void **)WPIA1) +#define pWPIA2 ((volatile void **)WPIA2) +#define pWPIA3 ((volatile void **)WPIA3) +#define pWPIA4 ((volatile void **)WPIA4) +#define pWPIA5 ((volatile void **)WPIA5) +#define pWPIACNT0 ((volatile unsigned long *)WPIACNT0) +#define pWPIACNT1 ((volatile unsigned long *)WPIACNT1) +#define pWPIACNT2 ((volatile unsigned long *)WPIACNT2) +#define pWPIACNT3 ((volatile unsigned long *)WPIACNT3) +#define pWPIACNT4 ((volatile unsigned long *)WPIACNT4) +#define pWPIACNT5 ((volatile unsigned long *)WPIACNT5) +#define pWPDACTL ((volatile unsigned long *)WPDACTL) +#define pWPDA0 ((volatile void **)WPDA0) +#define pWPDA1 ((volatile void **)WPDA1) +#define pWPDACNT0 ((volatile unsigned long *)WPDACNT0) +#define pWPDACNT1 ((volatile unsigned long *)WPDACNT1) +#define pWPSTAT ((volatile unsigned long *)WPSTAT) + +/* Performance Monitor Registers */ +#define pPFCTL ((volatile unsigned long *)PFCTL) +#define pPFCNTR0 ((volatile unsigned long *)PFCNTR0) +#define pPFCNTR1 ((volatile unsigned long *)PFCNTR1) + +/* #define IPRIO 0xFFE02110 */ /* Core Interrupt Priority Register */ + +#endif /* _CDEF_LPBLACKFIN_H */ diff --git a/include/asm-blackfin/cpu/defBF531.h b/include/asm-blackfin/cpu/defBF531.h new file mode 100644 index 0000000000..6c7cd5a6db --- /dev/null +++ b/include/asm-blackfin/cpu/defBF531.h @@ -0,0 +1,24 @@ +/* + * defBF531.h + * + * This file is subject to the terms and conditions of the GNU Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Non-GPL License also available as part of VisualDSP++ + * + * http://www.analog.com/processors/resources/crosscore/visualDspDevSoftware.html + * + * (c) Copyright 2001-2005 Analog Devices, Inc. All rights reserved + * + * This file under source code control, please send bugs or changes to: + * dsptools.support@analog.com + * + */ + +#ifndef _DEFBF531_H +#define _DEFBF531_H + +#include + +#endif /* _DEFBF531_H */ diff --git a/include/asm-blackfin/cpu/defBF532.h b/include/asm-blackfin/cpu/defBF532.h new file mode 100644 index 0000000000..c30d5cd7bc --- /dev/null +++ b/include/asm-blackfin/cpu/defBF532.h @@ -0,0 +1,1159 @@ +/* + * defBF532.h + * + * This file is subject to the terms and conditions of the GNU Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Non-GPL License also available as part of VisualDSP++ + * + * http://www.analog.com/processors/resources/crosscore/visualDspDevSoftware.html + * + * (c) Copyright 2001-2005 Analog Devices, Inc. All rights reserved + * + * This file under source code control, please send bugs or changes to: + * dsptools.support@analog.com + * + */ + +/* SYSTEM & MM REGISTER BIT & ADDRESS DEFINITIONS FOR ADSP-BF532 */ + +#ifndef _DEF_BF532_H +#define _DEF_BF532_H + +/* + * #if !defined(__ADSPLPBLACKFIN__) + * #warning defBF532.h should only be included for 532 compatible chips + * #endif + */ + +/* include all Core registers and bit definitions */ +#include + +/* Helper macros + * usage: + * P0.H = HI(UART_THR); + * P0.L = LO(UART_THR); + */ + +#define LO(con32) ((con32) & 0xFFFF) +#define lo(con32) ((con32) & 0xFFFF) +#define HI(con32) (((con32) >> 16) & 0xFFFF) +#define hi(con32) (((con32) >> 16) & 0xFFFF) + +/* + * System MMR Register Map + */ + +/* Clock and System Control (0xFFC00000 - 0xFFC000FF) */ +#define PLL_CTL 0xFFC00000 /* PLL Control register (16-bit) */ +#define PLL_DIV 0xFFC00004 /* PLL Divide Register (16-bit) */ +#define VR_CTL 0xFFC00008 /* Voltage Regulator Control Register (16-bit) */ +#define PLL_STAT 0xFFC0000C /* PLL Status register (16-bit) */ +#define PLL_LOCKCNT 0xFFC00010 /* PLL Lock Count register (16-bit) */ +#define CHIPID 0xFFC00014 /* Chip ID register (32-bit) */ +#define SWRST 0xFFC00100 /* Software Reset Register (16-bit) */ +#define SYSCR 0xFFC00104 /* System Configuration register */ + +/* System Interrupt Controller (0xFFC00100 - 0xFFC001FF) */ +#define SIC_RVECT 0xFFC00108 /* Interrupt Reset Vector Address Register */ +#define SIC_IMASK 0xFFC0010C /* Interrupt Mask Register */ +#define SIC_IAR0 0xFFC00110 /* Interrupt Assignment Register 0 */ +#define SIC_IAR1 0xFFC00114 /* Interrupt Assignment Register 1 */ +#define SIC_IAR2 0xFFC00118 /* Interrupt Assignment Register 2 */ +#define SIC_ISR 0xFFC00120 /* Interrupt Status Register */ +#define SIC_IWR 0xFFC00124 /* Interrupt Wakeup Register */ + +/* Watchdog Timer (0xFFC00200 - 0xFFC002FF) */ +#define WDOG_CTL 0xFFC00200 /* Watchdog Control Register */ +#define WDOG_CNT 0xFFC00204 /* Watchdog Count Register */ +#define WDOG_STAT 0xFFC00208 /* Watchdog Status Register */ + +/* Real Time Clock (0xFFC00300 - 0xFFC003FF) */ +#define RTC_STAT 0xFFC00300 /* RTC Status Register */ +#define RTC_ICTL 0xFFC00304 /* RTC Interrupt Control Register */ +#define RTC_ISTAT 0xFFC00308 /* RTC Interrupt Status Register */ +#define RTC_SWCNT 0xFFC0030C /* RTC Stopwatch Count Register */ +#define RTC_ALARM 0xFFC00310 /* RTC Alarm Time Register */ +#define RTC_FAST 0xFFC00314 /* RTC Prescaler Enable Register */ +#define RTC_PREN 0xFFC00314 /* RTC Prescaler Enable Register (alternate macro) */ + +/* UART Controller (0xFFC00400 - 0xFFC004FF) */ +#define UART_THR 0xFFC00400 /* Transmit Holding register */ +#define UART_RBR 0xFFC00400 /* Receive Buffer register */ +#define UART_DLL 0xFFC00400 /* Divisor Latch (Low-Byte) */ +#define UART_IER 0xFFC00404 /* Interrupt Enable Register */ +#define UART_DLH 0xFFC00404 /* Divisor Latch (High-Byte) */ +#define UART_IIR 0xFFC00408 /* Interrupt Identification Register */ +#define UART_LCR 0xFFC0040C /* Line Control Register */ +#define UART_MCR 0xFFC00410 /* Modem Control Register */ +#define UART_LSR 0xFFC00414 /* Line Status Register */ +/* #define UART_MSR 0xFFC00418 */ /* Modem Status Register (UNUSED in ADSP-BF532) */ +#define UART_SCR 0xFFC0041C /* SCR Scratch Register */ +#define UART_GCTL 0xFFC00424 /* Global Control Register */ + +/* SPI Controller (0xFFC00500 - 0xFFC005FF) */ +#define SPI_CTL 0xFFC00500 /* SPI Control Register */ +#define SPI_FLG 0xFFC00504 /* SPI Flag register */ +#define SPI_STAT 0xFFC00508 /* SPI Status register */ +#define SPI_TDBR 0xFFC0050C /* SPI Transmit Data Buffer Register */ +#define SPI_RDBR 0xFFC00510 /* SPI Receive Data Buffer Register */ +#define SPI_BAUD 0xFFC00514 /* SPI Baud rate Register */ +#define SPI_SHADOW 0xFFC00518 /* SPI_RDBR Shadow Register */ + +/* TIMER 0, 1, 2 Registers (0xFFC00600 - 0xFFC006FF) */ +#define TIMER0_CONFIG 0xFFC00600 /* Timer 0 Configuration Register */ +#define TIMER0_COUNTER 0xFFC00604 /* Timer 0 Counter Register */ +#define TIMER0_PERIOD 0xFFC00608 /* Timer 0 Period Register */ +#define TIMER0_WIDTH 0xFFC0060C /* Timer 0 Width Register */ + +#define TIMER1_CONFIG 0xFFC00610 /* Timer 1 Configuration Register */ +#define TIMER1_COUNTER 0xFFC00614 /* Timer 1 Counter Register */ +#define TIMER1_PERIOD 0xFFC00618 /* Timer 1 Period Register */ +#define TIMER1_WIDTH 0xFFC0061C /* Timer 1 Width Register */ + +#define TIMER2_CONFIG 0xFFC00620 /* Timer 2 Configuration Register */ +#define TIMER2_COUNTER 0xFFC00624 /* Timer 2 Counter Register */ +#define TIMER2_PERIOD 0xFFC00628 /* Timer 2 Period Register */ +#define TIMER2_WIDTH 0xFFC0062C /* Timer 2 Width Register */ + +#define TIMER_ENABLE 0xFFC00640 /* Timer Enable Register */ +#define TIMER_DISABLE 0xFFC00644 /* Timer Disable Register */ +#define TIMER_STATUS 0xFFC00648 /* Timer Status Register */ + +/* General Purpose IO (0xFFC00700 - 0xFFC007FF) */ +#define FIO_FLAG_D 0xFFC00700 /* Flag Mask to directly specify state of pins */ +#define FIO_FLAG_C 0xFFC00704 /* Peripheral Interrupt Flag Register (clear) */ +#define FIO_FLAG_S 0xFFC00708 /* Peripheral Interrupt Flag Register (set) */ +#define FIO_FLAG_T 0xFFC0070C /* Flag Mask to directly toggle state of pins */ +#define FIO_MASKA_D 0xFFC00710 /* Flag Mask Interrupt A Register (set directly) */ +#define FIO_MASKA_C 0xFFC00714 /* Flag Mask Interrupt A Register (clear) */ +#define FIO_MASKA_S 0xFFC00718 /* Flag Mask Interrupt A Register (set) */ +#define FIO_MASKA_T 0xFFC0071C /* Flag Mask Interrupt A Register (toggle) */ +#define FIO_MASKB_D 0xFFC00720 /* Flag Mask Interrupt B Register (set directly) */ +#define FIO_MASKB_C 0xFFC00724 /* Flag Mask Interrupt B Register (clear) */ +#define FIO_MASKB_S 0xFFC00728 /* Flag Mask Interrupt B Register (set) */ +#define FIO_MASKB_T 0xFFC0072C /* Flag Mask Interrupt B Register (toggle) */ +#define FIO_DIR 0xFFC00730 /* Peripheral Flag Direction Register */ +#define FIO_POLAR 0xFFC00734 /* Flag Source Polarity Register */ +#define FIO_EDGE 0xFFC00738 /* Flag Source Sensitivity Register */ +#define FIO_BOTH 0xFFC0073C /* Flag Set on BOTH Edges Register */ +#define FIO_INEN 0xFFC00740 /* Flag Input Enable Register */ + +/* SPORT0 Controller (0xFFC00800 - 0xFFC008FF) */ +#define SPORT0_TCR1 0xFFC00800 /* SPORT0 Transmit Configuration 1 Register */ +#define SPORT0_TCR2 0xFFC00804 /* SPORT0 Transmit Configuration 2 Register */ +#define SPORT0_TCLKDIV 0xFFC00808 /* SPORT0 Transmit Clock Divider */ +#define SPORT0_TFSDIV 0xFFC0080C /* SPORT0 Transmit Frame Sync Divider */ +#define SPORT0_TX 0xFFC00810 /* SPORT0 TX Data Register */ +#define SPORT0_RX 0xFFC00818 /* SPORT0 RX Data Register */ +#define SPORT0_RCR1 0xFFC00820 /* SPORT0 Transmit Configuration 1 Register */ +#define SPORT0_RCR2 0xFFC00824 /* SPORT0 Transmit Configuration 2 Register */ +#define SPORT0_RCLKDIV 0xFFC00828 /* SPORT0 Receive Clock Divider */ +#define SPORT0_RFSDIV 0xFFC0082C /* SPORT0 Receive Frame Sync Divider */ +#define SPORT0_STAT 0xFFC00830 /* SPORT0 Status Register */ +#define SPORT0_CHNL 0xFFC00834 /* SPORT0 Current Channel Register */ +#define SPORT0_MCMC1 0xFFC00838 /* SPORT0 Multi-Channel Configuration Register 1 */ +#define SPORT0_MCMC2 0xFFC0083C /* SPORT0 Multi-Channel Configuration Register 2 */ +#define SPORT0_MTCS0 0xFFC00840 /* SPORT0 Multi-Channel Transmit Select Register 0 */ +#define SPORT0_MTCS1 0xFFC00844 /* SPORT0 Multi-Channel Transmit Select Register 1 */ +#define SPORT0_MTCS2 0xFFC00848 /* SPORT0 Multi-Channel Transmit Select Register 2 */ +#define SPORT0_MTCS3 0xFFC0084C /* SPORT0 Multi-Channel Transmit Select Register 3 */ +#define SPORT0_MRCS0 0xFFC00850 /* SPORT0 Multi-Channel Receive Select Register 0 */ +#define SPORT0_MRCS1 0xFFC00854 /* SPORT0 Multi-Channel Receive Select Register 1 */ +#define SPORT0_MRCS2 0xFFC00858 /* SPORT0 Multi-Channel Receive Select Register 2 */ +#define SPORT0_MRCS3 0xFFC0085C /* SPORT0 Multi-Channel Receive Select Register 3 */ + +/* SPORT1 Controller (0xFFC00900 - 0xFFC009FF) */ +#define SPORT1_TCR1 0xFFC00900 /* SPORT1 Transmit Configuration 1 Register */ +#define SPORT1_TCR2 0xFFC00904 /* SPORT1 Transmit Configuration 2 Register */ +#define SPORT1_TCLKDIV 0xFFC00908 /* SPORT1 Transmit Clock Divider */ +#define SPORT1_TFSDIV 0xFFC0090C /* SPORT1 Transmit Frame Sync Divider */ +#define SPORT1_TX 0xFFC00910 /* SPORT1 TX Data Register */ +#define SPORT1_RX 0xFFC00918 /* SPORT1 RX Data Register */ +#define SPORT1_RCR1 0xFFC00920 /* SPORT1 Transmit Configuration 1 Register */ +#define SPORT1_RCR2 0xFFC00924 /* SPORT1 Transmit Configuration 2 Register */ +#define SPORT1_RCLKDIV 0xFFC00928 /* SPORT1 Receive Clock Divider */ +#define SPORT1_RFSDIV 0xFFC0092C /* SPORT1 Receive Frame Sync Divider */ +#define SPORT1_STAT 0xFFC00930 /* SPORT1 Status Register */ +#define SPORT1_CHNL 0xFFC00934 /* SPORT1 Current Channel Register */ +#define SPORT1_MCMC1 0xFFC00938 /* SPORT1 Multi-Channel Configuration Register 1 */ +#define SPORT1_MCMC2 0xFFC0093C /* SPORT1 Multi-Channel Configuration Register 2 */ +#define SPORT1_MTCS0 0xFFC00940 /* SPORT1 Multi-Channel Transmit Select Register 0 */ +#define SPORT1_MTCS1 0xFFC00944 /* SPORT1 Multi-Channel Transmit Select Register 1 */ +#define SPORT1_MTCS2 0xFFC00948 /* SPORT1 Multi-Channel Transmit Select Register 2 */ +#define SPORT1_MTCS3 0xFFC0094C /* SPORT1 Multi-Channel Transmit Select Register 3 */ +#define SPORT1_MRCS0 0xFFC00950 /* SPORT1 Multi-Channel Receive Select Register 0 */ +#define SPORT1_MRCS1 0xFFC00954 /* SPORT1 Multi-Channel Receive Select Register 1 */ +#define SPORT1_MRCS2 0xFFC00958 /* SPORT1 Multi-Channel Receive Select Register 2 */ +#define SPORT1_MRCS3 0xFFC0095C /* SPORT1 Multi-Channel Receive Select Register 3 */ + +/* Asynchronous Memory Controller - External Bus Interface Unit */ +#define EBIU_AMGCTL 0xFFC00A00 /* Asynchronous Memory Global Control Register */ +#define EBIU_AMBCTL0 0xFFC00A04 /* Asynchronous Memory Bank Control Register 0 */ +#define EBIU_AMBCTL1 0xFFC00A08 /* Asynchronous Memory Bank Control Register 1 */ + +/* SDRAM Controller External Bus Interface Unit (0xFFC00A00 - 0xFFC00AFF) */ +#define EBIU_SDGCTL 0xFFC00A10 /* SDRAM Global Control Register */ +#define EBIU_SDBCTL 0xFFC00A14 /* SDRAM Bank Control Register */ +#define EBIU_SDRRC 0xFFC00A18 /* SDRAM Refresh Rate Control Register */ +#define EBIU_SDSTAT 0xFFC00A1C /* SDRAM Status Register */ + +/* DMA Test Registers */ +#define DMA_CCOMP 0xFFC00B04 /* DMA Cycle Count Register */ +#define DMA_ACOMP 0xFFC00B00 /* Debug Compare Address Register */ +#define DMA_MISR 0xFFC00B08 /* MISR Register */ +#define DMA_TCPER 0xFFC00B0C /* Traffic Control Periods Register */ +#define DMA_TCCNT 0xFFC00B10 /* Traffic Control Current Counts Register */ +#define DMA_TMODE 0xFFC00B14 /* DMA Test Modes Register */ +#define DMA_TMCHAN 0xFFC00B18 /* DMA Testmode Selected Channel Register */ +#define DMA_TMSTAT 0xFFC00B1C /* DMA Testmode Channel Status Register */ +#define DMA_TMBD 0xFFC00B20 /* DMA Testmode DAB Bus Data Register */ +#define DMA_TMM0D 0xFFC00B24 /* DMA Testmode Mem0 Data Register */ +#define DMA_TMM1D 0xFFC00B28 /* DMA Testmode Mem1 Data Register */ +#define DMA_TMMA 0xFFC00B2C /* DMA Testmode Memory Address Register */ + +/* DMA Controller (0xFFC00C00 - 0xFFC00FFF) */ +#define DMA0_CONFIG 0xFFC00C08 /* DMA Channel 0 Configuration Register */ +#define DMA0_NEXT_DESC_PTR 0xFFC00C00 /* DMA Channel 0 Next Descriptor Pointer Register */ +#define DMA0_START_ADDR 0xFFC00C04 /* DMA Channel 0 Start Address Register */ +#define DMA0_X_COUNT 0xFFC00C10 /* DMA Channel 0 X Count Register */ +#define DMA0_Y_COUNT 0xFFC00C18 /* DMA Channel 0 Y Count Register */ +#define DMA0_X_MODIFY 0xFFC00C14 /* DMA Channel 0 X Modify Register */ +#define DMA0_Y_MODIFY 0xFFC00C1C /* DMA Channel 0 Y Modify Register */ +#define DMA0_CURR_DESC_PTR 0xFFC00C20 /* DMA Channel 0 Current Descriptor Pointer Register */ +#define DMA0_CURR_ADDR 0xFFC00C24 /* DMA Channel 0 Current Address Register */ +#define DMA0_CURR_X_COUNT 0xFFC00C30 /* DMA Channel 0 Current X Count Register */ +#define DMA0_CURR_Y_COUNT 0xFFC00C38 /* DMA Channel 0 Current Y Count Register */ +#define DMA0_IRQ_STATUS 0xFFC00C28 /* DMA Channel 0 Interrupt/Status Register */ +#define DMA0_PERIPHERAL_MAP 0xFFC00C2C /* DMA Channel 0 Peripheral Map Register */ + +#define DMA1_CONFIG 0xFFC00C48 /* DMA Channel 1 Configuration Register */ +#define DMA1_NEXT_DESC_PTR 0xFFC00C40 /* DMA Channel 1 Next Descriptor Pointer Register */ +#define DMA1_START_ADDR 0xFFC00C44 /* DMA Channel 1 Start Address Register */ +#define DMA1_X_COUNT 0xFFC00C50 /* DMA Channel 1 X Count Register */ +#define DMA1_Y_COUNT 0xFFC00C58 /* DMA Channel 1 Y Count Register */ +#define DMA1_X_MODIFY 0xFFC00C54 /* DMA Channel 1 X Modify Register */ +#define DMA1_Y_MODIFY 0xFFC00C5C /* DMA Channel 1 Y Modify Register */ +#define DMA1_CURR_DESC_PTR 0xFFC00C60 /* DMA Channel 1 Current Descriptor Pointer Register */ +#define DMA1_CURR_ADDR 0xFFC00C64 /* DMA Channel 1 Current Address Register */ +#define DMA1_CURR_X_COUNT 0xFFC00C70 /* DMA Channel 1 Current X Count Register */ +#define DMA1_CURR_Y_COUNT 0xFFC00C78 /* DMA Channel 1 Current Y Count Register */ +#define DMA1_IRQ_STATUS 0xFFC00C68 /* DMA Channel 1 Interrupt/Status Register */ +#define DMA1_PERIPHERAL_MAP 0xFFC00C6C /* DMA Channel 1 Peripheral Map Register */ + +#define DMA2_CONFIG 0xFFC00C88 /* DMA Channel 2 Configuration Register */ +#define DMA2_NEXT_DESC_PTR 0xFFC00C80 /* DMA Channel 2 Next Descriptor Pointer Register */ +#define DMA2_START_ADDR 0xFFC00C84 /* DMA Channel 2 Start Address Register */ +#define DMA2_X_COUNT 0xFFC00C90 /* DMA Channel 2 X Count Register */ +#define DMA2_Y_COUNT 0xFFC00C98 /* DMA Channel 2 Y Count Register */ +#define DMA2_X_MODIFY 0xFFC00C94 /* DMA Channel 2 X Modify Register */ +#define DMA2_Y_MODIFY 0xFFC00C9C /* DMA Channel 2 Y Modify Register */ +#define DMA2_CURR_DESC_PTR 0xFFC00CA0 /* DMA Channel 2 Current Descriptor Pointer Register */ +#define DMA2_CURR_ADDR 0xFFC00CA4 /* DMA Channel 2 Current Address Register */ +#define DMA2_CURR_X_COUNT 0xFFC00CB0 /* DMA Channel 2 Current X Count Register */ +#define DMA2_CURR_Y_COUNT 0xFFC00CB8 /* DMA Channel 2 Current Y Count Register */ +#define DMA2_IRQ_STATUS 0xFFC00CA8 /* DMA Channel 2 Interrupt/Status Register */ +#define DMA2_PERIPHERAL_MAP 0xFFC00CAC /* DMA Channel 2 Peripheral Map Register */ + +#define DMA3_CONFIG 0xFFC00CC8 /* DMA Channel 3 Configuration Register */ +#define DMA3_NEXT_DESC_PTR 0xFFC00CC0 /* DMA Channel 3 Next Descriptor Pointer Register */ +#define DMA3_START_ADDR 0xFFC00CC4 /* DMA Channel 3 Start Address Register */ +#define DMA3_X_COUNT 0xFFC00CD0 /* DMA Channel 3 X Count Register */ +#define DMA3_Y_COUNT 0xFFC00CD8 /* DMA Channel 3 Y Count Register */ +#define DMA3_X_MODIFY 0xFFC00CD4 /* DMA Channel 3 X Modify Register */ +#define DMA3_Y_MODIFY 0xFFC00CDC /* DMA Channel 3 Y Modify Register */ +#define DMA3_CURR_DESC_PTR 0xFFC00CE0 /* DMA Channel 3 Current Descriptor Pointer Register */ +#define DMA3_CURR_ADDR 0xFFC00CE4 /* DMA Channel 3 Current Address Register */ +#define DMA3_CURR_X_COUNT 0xFFC00CF0 /* DMA Channel 3 Current X Count Register */ +#define DMA3_CURR_Y_COUNT 0xFFC00CF8 /* DMA Channel 3 Current Y Count Register */ +#define DMA3_IRQ_STATUS 0xFFC00CE8 /* DMA Channel 3 Interrupt/Status Register */ +#define DMA3_PERIPHERAL_MAP 0xFFC00CEC /* DMA Channel 3 Peripheral Map Register */ + +#define DMA4_CONFIG 0xFFC00D08 /* DMA Channel 4 Configuration Register */ +#define DMA4_NEXT_DESC_PTR 0xFFC00D00 /* DMA Channel 4 Next Descriptor Pointer Register */ +#define DMA4_START_ADDR 0xFFC00D04 /* DMA Channel 4 Start Address Register */ +#define DMA4_X_COUNT 0xFFC00D10 /* DMA Channel 4 X Count Register */ +#define DMA4_Y_COUNT 0xFFC00D18 /* DMA Channel 4 Y Count Register */ +#define DMA4_X_MODIFY 0xFFC00D14 /* DMA Channel 4 X Modify Register */ +#define DMA4_Y_MODIFY 0xFFC00D1C /* DMA Channel 4 Y Modify Register */ +#define DMA4_CURR_DESC_PTR 0xFFC00D20 /* DMA Channel 4 Current Descriptor Pointer Register */ +#define DMA4_CURR_ADDR 0xFFC00D24 /* DMA Channel 4 Current Address Register */ +#define DMA4_CURR_X_COUNT 0xFFC00D30 /* DMA Channel 4 Current X Count Register */ +#define DMA4_CURR_Y_COUNT 0xFFC00D38 /* DMA Channel 4 Current Y Count Register */ +#define DMA4_IRQ_STATUS 0xFFC00D28 /* DMA Channel 4 Interrupt/Status Register */ +#define DMA4_PERIPHERAL_MAP 0xFFC00D2C /* DMA Channel 4 Peripheral Map Register */ + +#define DMA5_CONFIG 0xFFC00D48 /* DMA Channel 5 Configuration Register */ +#define DMA5_NEXT_DESC_PTR 0xFFC00D40 /* DMA Channel 5 Next Descriptor Pointer Register */ +#define DMA5_START_ADDR 0xFFC00D44 /* DMA Channel 5 Start Address Register */ +#define DMA5_X_COUNT 0xFFC00D50 /* DMA Channel 5 X Count Register */ +#define DMA5_Y_COUNT 0xFFC00D58 /* DMA Channel 5 Y Count Register */ +#define DMA5_X_MODIFY 0xFFC00D54 /* DMA Channel 5 X Modify Register */ +#define DMA5_Y_MODIFY 0xFFC00D5C /* DMA Channel 5 Y Modify Register */ +#define DMA5_CURR_DESC_PTR 0xFFC00D60 /* DMA Channel 5 Current Descriptor Pointer Register */ +#define DMA5_CURR_ADDR 0xFFC00D64 /* DMA Channel 5 Current Address Register */ +#define DMA5_CURR_X_COUNT 0xFFC00D70 /* DMA Channel 5 Current X Count Register */ +#define DMA5_CURR_Y_COUNT 0xFFC00D78 /* DMA Channel 5 Current Y Count Register */ +#define DMA5_IRQ_STATUS 0xFFC00D68 /* DMA Channel 5 Interrupt/Status Register */ +#define DMA5_PERIPHERAL_MAP 0xFFC00D6C /* DMA Channel 5 Peripheral Map Register */ + +#define DMA6_CONFIG 0xFFC00D88 /* DMA Channel 6 Configuration Register */ +#define DMA6_NEXT_DESC_PTR 0xFFC00D80 /* DMA Channel 6 Next Descriptor Pointer Register */ +#define DMA6_START_ADDR 0xFFC00D84 /* DMA Channel 6 Start Address Register */ +#define DMA6_X_COUNT 0xFFC00D90 /* DMA Channel 6 X Count Register */ +#define DMA6_Y_COUNT 0xFFC00D98 /* DMA Channel 6 Y Count Register */ +#define DMA6_X_MODIFY 0xFFC00D94 /* DMA Channel 6 X Modify Register */ +#define DMA6_Y_MODIFY 0xFFC00D9C /* DMA Channel 6 Y Modify Register */ +#define DMA6_CURR_DESC_PTR 0xFFC00DA0 /* DMA Channel 6 Current Descriptor Pointer Register */ +#define DMA6_CURR_ADDR 0xFFC00DA4 /* DMA Channel 6 Current Address Register */ +#define DMA6_CURR_X_COUNT 0xFFC00DB0 /* DMA Channel 6 Current X Count Register */ +#define DMA6_CURR_Y_COUNT 0xFFC00DB8 /* DMA Channel 6 Current Y Count Register */ +#define DMA6_IRQ_STATUS 0xFFC00DA8 /* DMA Channel 6 Interrupt/Status Register */ +#define DMA6_PERIPHERAL_MAP 0xFFC00DAC /* DMA Channel 6 Peripheral Map Register */ + +#define DMA7_CONFIG 0xFFC00DC8 /* DMA Channel 7 Configuration Register */ +#define DMA7_NEXT_DESC_PTR 0xFFC00DC0 /* DMA Channel 7 Next Descriptor Pointer Register */ +#define DMA7_START_ADDR 0xFFC00DC4 /* DMA Channel 7 Start Address Register */ +#define DMA7_X_COUNT 0xFFC00DD0 /* DMA Channel 7 X Count Register */ +#define DMA7_Y_COUNT 0xFFC00DD8 /* DMA Channel 7 Y Count Register */ +#define DMA7_X_MODIFY 0xFFC00DD4 /* DMA Channel 7 X Modify Register */ +#define DMA7_Y_MODIFY 0xFFC00DDC /* DMA Channel 7 Y Modify Register */ +#define DMA7_CURR_DESC_PTR 0xFFC00DE0 /* DMA Channel 7 Current Descriptor Pointer Register */ +#define DMA7_CURR_ADDR 0xFFC00DE4 /* DMA Channel 7 Current Address Register */ +#define DMA7_CURR_X_COUNT 0xFFC00DF0 /* DMA Channel 7 Current X Count Register */ +#define DMA7_CURR_Y_COUNT 0xFFC00DF8 /* DMA Channel 7 Current Y Count Register */ +#define DMA7_IRQ_STATUS 0xFFC00DE8 /* DMA Channel 7 Interrupt/Status Register */ +#define DMA7_PERIPHERAL_MAP 0xFFC00DEC /* DMA Channel 7 Peripheral Map Register */ + +#define MDMA_D1_CONFIG 0xFFC00E88 /* MemDMA Stream 1 Destination Configuration Register */ +#define MDMA_D1_NEXT_DESC_PTR 0xFFC00E80 /* MemDMA Stream 1 Destination Next Descriptor Pointer Register */ +#define MDMA_D1_START_ADDR 0xFFC00E84 /* MemDMA Stream 1 Destination Start Address Register */ +#define MDMA_D1_X_COUNT 0xFFC00E90 /* MemDMA Stream 1 Destination X Count Register */ +#define MDMA_D1_Y_COUNT 0xFFC00E98 /* MemDMA Stream 1 Destination Y Count Register */ +#define MDMA_D1_X_MODIFY 0xFFC00E94 /* MemDMA Stream 1 Destination X Modify Register */ +#define MDMA_D1_Y_MODIFY 0xFFC00E9C /* MemDMA Stream 1 Destination Y Modify Register */ +#define MDMA_D1_CURR_DESC_PTR 0xFFC00EA0 /* MemDMA Stream 1 Destination Current Descriptor Pointer Register */ +#define MDMA_D1_CURR_ADDR 0xFFC00EA4 /* MemDMA Stream 1 Destination Current Address Register */ +#define MDMA_D1_CURR_X_COUNT 0xFFC00EB0 /* MemDMA Stream 1 Destination Current X Count Register */ +#define MDMA_D1_CURR_Y_COUNT 0xFFC00EB8 /* MemDMA Stream 1 Destination Current Y Count Register */ +#define MDMA_D1_IRQ_STATUS 0xFFC00EA8 /* MemDMA Stream 1 Destination Interrupt/Status Register */ +#define MDMA_D1_PERIPHERAL_MAP 0xFFC00EAC /* MemDMA Stream 1 Destination Peripheral Map Register */ + +#define MDMA_S1_CONFIG 0xFFC00EC8 /* MemDMA Stream 1 Source Configuration Register */ +#define MDMA_S1_NEXT_DESC_PTR 0xFFC00EC0 /* MemDMA Stream 1 Source Next Descriptor Pointer Register */ +#define MDMA_S1_START_ADDR 0xFFC00EC4 /* MemDMA Stream 1 Source Start Address Register */ +#define MDMA_S1_X_COUNT 0xFFC00ED0 /* MemDMA Stream 1 Source X Count Register */ +#define MDMA_S1_Y_COUNT 0xFFC00ED8 /* MemDMA Stream 1 Source Y Count Register */ +#define MDMA_S1_X_MODIFY 0xFFC00ED4 /* MemDMA Stream 1 Source X Modify Register */ +#define MDMA_S1_Y_MODIFY 0xFFC00EDC /* MemDMA Stream 1 Source Y Modify Register */ +#define MDMA_S1_CURR_DESC_PTR 0xFFC00EE0 /* MemDMA Stream 1 Source Current Descriptor Pointer Register */ +#define MDMA_S1_CURR_ADDR 0xFFC00EE4 /* MemDMA Stream 1 Source Current Address Register */ +#define MDMA_S1_CURR_X_COUNT 0xFFC00EF0 /* MemDMA Stream 1 Source Current X Count Register */ +#define MDMA_S1_CURR_Y_COUNT 0xFFC00EF8 /* MemDMA Stream 1 Source Current Y Count Register */ +#define MDMA_S1_IRQ_STATUS 0xFFC00EE8 /* MemDMA Stream 1 Source Interrupt/Status Register */ +#define MDMA_S1_PERIPHERAL_MAP 0xFFC00EEC /* MemDMA Stream 1 Source Peripheral Map Register */ + +#define MDMA_D0_CONFIG 0xFFC00E08 /* MemDMA Stream 0 Destination Configuration Register */ +#define MDMA_D0_NEXT_DESC_PTR 0xFFC00E00 /* MemDMA Stream 0 Destination Next Descriptor Pointer Register */ +#define MDMA_D0_START_ADDR 0xFFC00E04 /* MemDMA Stream 0 Destination Start Address Register */ +#define MDMA_D0_X_COUNT 0xFFC00E10 /* MemDMA Stream 0 Destination X Count Register */ +#define MDMA_D0_Y_COUNT 0xFFC00E18 /* MemDMA Stream 0 Destination Y Count Register */ +#define MDMA_D0_X_MODIFY 0xFFC00E14 /* MemDMA Stream 0 Destination X Modify Register */ +#define MDMA_D0_Y_MODIFY 0xFFC00E1C /* MemDMA Stream 0 Destination Y Modify Register */ +#define MDMA_D0_CURR_DESC_PTR 0xFFC00E20 /* MemDMA Stream 0 Destination Current Descriptor Pointer Register */ +#define MDMA_D0_CURR_ADDR 0xFFC00E24 /* MemDMA Stream 0 Destination Current Address Register */ +#define MDMA_D0_CURR_X_COUNT 0xFFC00E30 /* MemDMA Stream 0 Destination Current X Count Register */ +#define MDMA_D0_CURR_Y_COUNT 0xFFC00E38 /* MemDMA Stream 0 Destination Current Y Count Register */ +#define MDMA_D0_IRQ_STATUS 0xFFC00E28 /* MemDMA Stream 0 Destination Interrupt/Status Register */ +#define MDMA_D0_PERIPHERAL_MAP 0xFFC00E2C /* MemDMA Stream 0 Destination Peripheral Map Register */ + +#define MDMA_S0_CONFIG 0xFFC00E48 /* MemDMA Stream 0 Source Configuration Register */ +#define MDMA_S0_NEXT_DESC_PTR 0xFFC00E40 /* MemDMA Stream 0 Source Next Descriptor Pointer Register */ +#define MDMA_S0_START_ADDR 0xFFC00E44 /* MemDMA Stream 0 Source Start Address Register */ +#define MDMA_S0_X_COUNT 0xFFC00E50 /* MemDMA Stream 0 Source X Count Register */ +#define MDMA_S0_Y_COUNT 0xFFC00E58 /* MemDMA Stream 0 Source Y Count Register */ +#define MDMA_S0_X_MODIFY 0xFFC00E54 /* MemDMA Stream 0 Source X Modify Register */ +#define MDMA_S0_Y_MODIFY 0xFFC00E5C /* MemDMA Stream 0 Source Y Modify Register */ +#define MDMA_S0_CURR_DESC_PTR 0xFFC00E60 /* MemDMA Stream 0 Source Current Descriptor Pointer Register */ +#define MDMA_S0_CURR_ADDR 0xFFC00E64 /* MemDMA Stream 0 Source Current Address Register */ +#define MDMA_S0_CURR_X_COUNT 0xFFC00E70 /* MemDMA Stream 0 Source Current X Count Register */ +#define MDMA_S0_CURR_Y_COUNT 0xFFC00E78 /* MemDMA Stream 0 Source Current Y Count Register */ +#define MDMA_S0_IRQ_STATUS 0xFFC00E68 /* MemDMA Stream 0 Source Interrupt/Status Register */ +#define MDMA_S0_PERIPHERAL_MAP 0xFFC00E6C /* MemDMA Stream 0 Source Peripheral Map Register */ + +/* Parallel Peripheral Interface (PPI) (0xFFC01000 - 0xFFC010FF) */ +#define PPI_CONTROL 0xFFC01000 /* PPI Control Register */ +#define PPI_STATUS 0xFFC01004 /* PPI Status Register */ +#define PPI_COUNT 0xFFC01008 /* PPI Transfer Count Register */ +#define PPI_DELAY 0xFFC0100C /* PPI Delay Count Register */ +#define PPI_FRAME 0xFFC01010 /* PPI Frame Length Register */ + +/* + * System MMR Register Bits + */ +/* + * PLL AND RESET MASKS + */ + +/* PLL_CTL Masks */ +#define PLL_CLKIN 0x00000000 /* Pass CLKIN to PLL */ +#define PLL_CLKIN_DIV2 0x00000001 /* Pass CLKIN/2 to PLL */ +#define PLL_OFF 0x00000002 /* Shut off PLL clocks */ +#define STOPCK_OFF 0x00000008 /* Core clock off */ +#define PDWN 0x00000020 /* Put the PLL in a Deep Sleep state */ +#define BYPASS 0x00000100 /* Bypass the PLL */ + +/* PLL_DIV Masks */ +#define SCLK_DIV(x) (x) /* SCLK = VCO / x */ + +#define CCLK_DIV1 0x00000000 /* CCLK = VCO / 1 */ +#define CCLK_DIV2 0x00000010 /* CCLK = VCO / 2 */ +#define CCLK_DIV4 0x00000020 /* CCLK = VCO / 4 */ +#define CCLK_DIV8 0x00000030 /* CCLK = VCO / 8 */ + +/* SWRST Mask */ +#define SYSTEM_RESET 0x00000007 /* Initiates a system software reset */ + +/* + * SYSTEM INTERRUPT CONTROLLER MASKS + */ + +/* SIC_IAR0 Masks */ +#define P0_IVG(x) ((x)-7) /* Peripheral #0 assigned IVG #x */ +#define P1_IVG(x) ((x)-7) << 0x4 /* Peripheral #1 assigned IVG #x */ +#define P2_IVG(x) ((x)-7) << 0x8 /* Peripheral #2 assigned IVG #x */ +#define P3_IVG(x) ((x)-7) << 0xC /* Peripheral #3 assigned IVG #x */ +#define P4_IVG(x) ((x)-7) << 0x10 /* Peripheral #4 assigned IVG #x */ +#define P5_IVG(x) ((x)-7) << 0x14 /* Peripheral #5 assigned IVG #x */ +#define P6_IVG(x) ((x)-7) << 0x18 /* Peripheral #6 assigned IVG #x */ +#define P7_IVG(x) ((x)-7) << 0x1C /* Peripheral #7 assigned IVG #x */ + +/* SIC_IAR1 Masks */ +#define P8_IVG(x) ((x)-7) /* Peripheral #8 assigned IVG #x */ +#define P9_IVG(x) ((x)-7) << 0x4 /* Peripheral #9 assigned IVG #x */ +#define P10_IVG(x) ((x)-7) << 0x8 /* Peripheral #10 assigned IVG #x */ +#define P11_IVG(x) ((x)-7) << 0xC /* Peripheral #11 assigned IVG #x */ +#define P12_IVG(x) ((x)-7) << 0x10 /* Peripheral #12 assigned IVG #x */ +#define P13_IVG(x) ((x)-7) << 0x14 /* Peripheral #13 assigned IVG #x */ +#define P14_IVG(x) ((x)-7) << 0x18 /* Peripheral #14 assigned IVG #x */ +#define P15_IVG(x) ((x)-7) << 0x1C /* Peripheral #15 assigned IVG #x */ + +/* SIC_IAR2 Masks */ +#define P16_IVG(x) ((x)-7) /* Peripheral #16 assigned IVG #x */ +#define P17_IVG(x) ((x)-7) << 0x4 /* Peripheral #17 assigned IVG #x */ +#define P18_IVG(x) ((x)-7) << 0x8 /* Peripheral #18 assigned IVG #x */ +#define P19_IVG(x) ((x)-7) << 0xC /* Peripheral #19 assigned IVG #x */ +#define P20_IVG(x) ((x)-7) << 0x10 /* Peripheral #20 assigned IVG #x */ +#define P21_IVG(x) ((x)-7) << 0x14 /* Peripheral #21 assigned IVG #x */ +#define P22_IVG(x) ((x)-7) << 0x18 /* Peripheral #22 assigned IVG #x */ +#define P23_IVG(x) ((x)-7) << 0x1C /* Peripheral #23 assigned IVG #x */ + +/* SIC_IMASK Masks */ +#define SIC_UNMASK_ALL 0x00000000 /* Unmask all peripheral interrupts */ +#define SIC_MASK_ALL 0xFFFFFFFF /* Mask all peripheral interrupts */ +#define SIC_MASK(x) (1 << (x)) /* Mask Peripheral #x interrupt */ +#define SIC_UNMASK(x) (0xFFFFFFFF ^ (1 << (x))) /* Unmask Peripheral #x interrupt */ + +/* SIC_IWR Masks */ +#define IWR_DISABLE_ALL 0x00000000 /* Wakeup Disable all peripherals */ +#define IWR_ENABLE_ALL 0xFFFFFFFF /* Wakeup Enable all peripherals */ +#define IWR_ENABLE(x) (1 << (x)) /* Wakeup Enable Peripheral #x */ +#define IWR_DISABLE(x) (0xFFFFFFFF ^ (1 << (x))) /* Wakeup Disable Peripheral #x */ + +/* + * WATCHDOG TIMER MASKS + */ +/* Watchdog Timer WDOG_CTL Register */ +#define ICTL(x) ((x<<1) & 0x0006) +#define ENABLE_RESET 0x00000000 /* Set Watchdog Timer to generate reset */ +#define ENABLE_NMI 0x00000002 /* Set Watchdog Timer to generate non-maskable interrupt */ +#define ENABLE_GPI 0x00000004 /* Set Watchdog Timer to generate general-purpose interrupt */ +#define DISABLE_EVT 0x00000006 /* Disable Watchdog Timer interrupts */ + +#define TMR_EN 0x0000 +#define TMR_DIS 0x0AD0 +#define TRO 0x8000 + +#define ICTL_P0 0x01 +#define ICTL_P1 0x02 +#define TRO_P 0x0F + +/* RTC_STAT and RTC_ALARM register */ +#define RTSEC 0x0000003F /* Real-Time Clock Seconds */ +#define RTMIN 0x00000FC0 /* Real-Time Clock Minutes */ +#define RTHR 0x0001F000 /* Real-Time Clock Hours */ +#define RTDAY 0xFFFE0000 /* Real-Time Clock Days */ + +/* RTC_ICTL register */ +#define SWIE 0x0001 /* Stopwatch Interrupt Enable */ +#define AIE 0x0002 /* Alarm Interrupt Enable */ +#define SIE 0x0004 /* Seconds (1 Hz) Interrupt Enable */ +#define MIE 0x0008 /* Minutes Interrupt Enable */ +#define HIE 0x0010 /* Hours Interrupt Enable */ +#define DIE 0x0020 /* 24 Hours (Days) Interrupt Enable */ +#define DAIE 0x0040 /* Day Alarm (Day, Hour, Minute, Second) Interrupt Enable */ +#define WCIE 0x8000 /* Write Complete Interrupt Enable */ + +/* RTC_ISTAT register */ +#define SWEF 0x0001 /* Stopwatch Event Flag */ +#define AEF 0x0002 /* Alarm Event Flag */ +#define SEF 0x0004 /* Seconds (1 Hz) Event Flag */ +#define MEF 0x0008 /* Minutes Event Flag */ +#define HEF 0x0010 /* Hours Event Flag */ +#define DEF 0x0020 /* 24 Hours (Days) Event Flag */ +#define DAEF 0x0040 /* Day Alarm (Day, Hour, Minute, Second) Event Flag */ +#define WPS 0x4000 /* Write Pending Status (RO) */ +#define WCOM 0x8000 /* Write Complete */ + +/* RTC_FAST Mask (RTC_PREN Mask) */ +#define ENABLE_PRESCALE 0x00000001 /* Enable prescaler so RTC runs at 1 Hz */ +#define PREN 0x00000001 /* ** Must be set after power-up for proper operation of RTC */ + +/* + * UART CONTROLLER MASKS + */ + +/* UART_LCR Register */ +#define DLAB 0x80 +#define SB 0x40 +#define STP 0x20 +#define EPS 0x10 +#define PEN 0x08 +#define STB 0x04 +#define WLS(x) ((x-5) & 0x03) + +#define DLAB_P 0x07 +#define SB_P 0x06 +#define STP_P 0x05 +#define EPS_P 0x04 +#define PEN_P 0x03 +#define STB_P 0x02 +#define WLS_P1 0x01 +#define WLS_P0 0x00 + +/* UART_MCR Register */ +#define LOOP_ENA 0x10 +#define LOOP_ENA_P 0x04 + +/* UART_LSR Register */ +#define TEMT 0x40 +#define THRE 0x20 +#define BI 0x10 +#define FE 0x08 +#define PE 0x04 +#define OE 0x02 +#define DR 0x01 + +#define TEMP_P 0x06 +#define THRE_P 0x05 +#define BI_P 0x04 +#define FE_P 0x03 +#define PE_P 0x02 +#define OE_P 0x01 +#define DR_P 0x00 + +/* UART_IER Register */ +#define ELSI 0x04 +#define ETBEI 0x02 +#define ERBFI 0x01 + +#define ELSI_P 0x02 +#define ETBEI_P 0x01 +#define ERBFI_P 0x00 + +/* UART_IIR Register */ +#define STATUS(x) ((x << 1) & 0x06) +#define NINT 0x01 +#define STATUS_P1 0x02 +#define STATUS_P0 0x01 +#define NINT_P 0x00 + +/* UART_GCTL Register */ +#define FFE 0x20 +#define FPE 0x10 +#define RPOLC 0x08 +#define TPOLC 0x04 +#define IREN 0x02 +#define UCEN 0x01 + +#define FFE_P 0x05 +#define FPE_P 0x04 +#define RPOLC_P 0x03 +#define TPOLC_P 0x02 +#define IREN_P 0x01 +#define UCEN_P 0x00 + +/* + * SERIAL PORT MASKS + */ +/* SPORTx_TCR1 Masks */ +#define TSPEN 0x0001 /* TX enable */ +#define ITCLK 0x0002 /* Internal TX Clock Select */ +#define TDTYPE 0x000C /* TX Data Formatting Select */ +#define TLSBIT 0x0010 /* TX Bit Order */ +#define ITFS 0x0200 /* Internal TX Frame Sync Select */ +#define TFSR 0x0400 /* TX Frame Sync Required Select */ +#define DITFS 0x0800 /* Data Independent TX Frame Sync Select */ +#define LTFS 0x1000 /* Low TX Frame Sync Select */ +#define LATFS 0x2000 /* Late TX Frame Sync Select */ +#define TCKFE 0x4000 /* TX Clock Falling Edge Select */ + +/* SPORTx_TCR2 Masks */ +#define SLEN 0x001F /*TX Word Length */ +#define TXSE 0x0100 /*TX Secondary Enable */ +#define TSFSE 0x0200 /*TX Stereo Frame Sync Enable */ +#define TRFST 0x0400 /*TX Right-First Data Order */ + +/* SPORTx_RCR1 Masks */ +#define RSPEN 0x0001 /* RX enable */ +#define IRCLK 0x0002 /* Internal RX Clock Select */ +#define RDTYPE 0x000C /* RX Data Formatting Select */ +#define RULAW 0x0008 /* u-Law enable */ +#define RALAW 0x000C /* A-Law enable */ +#define RLSBIT 0x0010 /* RX Bit Order */ +#define IRFS 0x0200 /* Internal RX Frame Sync Select */ +#define RFSR 0x0400 /* RX Frame Sync Required Select */ +#define LRFS 0x1000 /* Low RX Frame Sync Select */ +#define LARFS 0x2000 /* Late RX Frame Sync Select */ +#define RCKFE 0x4000 /* RX Clock Falling Edge Select */ + +/* SPORTx_RCR2 Masks */ +#define SLEN 0x001F /* RX Word Length */ +#define RXSE 0x0100 /* RX Secondary Enable */ +#define RSFSE 0x0200 /* RX Stereo Frame Sync Enable */ +#define RRFST 0x0400 /* Right-First Data Order */ + +/* SPORTx_STAT Masks */ +#define RXNE 0x0001 /* RX FIFO Not Empty Status */ +#define RUVF 0x0002 /* RX Underflow Status */ +#define ROVF 0x0004 /* RX Overflow Status */ +#define TXF 0x0008 /* TX FIFO Full Status */ +#define TUVF 0x0010 /* TX Underflow Status */ +#define TOVF 0x0020 /* TX Overflow Status */ +#define TXHRE 0x0040 /* TX Hold Register Empty */ + +/* SPORTx_MCMC1 Masks */ +#define WSIZE 0x0000F000 /* Multichannel Window Size Field */ +#define WOFF 0x000003FF /* /Multichannel Window Offset Field */ + +/* SPORTx_MCMC2 Masks */ +#define MCCRM 0x00000003 /* Multichannel Clock Recovery Mode */ +#define MCDTXPE 0x00000004 /* Multichannel DMA Transmit Packing */ +#define MCDRXPE 0x00000008 /* Multichannel DMA Receive Packing */ +#define MCMEN 0x00000010 /* Multichannel Frame Mode Enable */ +#define FSDR 0x00000080 /* Multichannel Frame Sync to Data Relationship */ +#define MFD 0x0000F000 /* Multichannel Frame Delay */ + +/* + * PARALLEL PERIPHERAL INTERFACE (PPI) MASKS + */ + +/* PPI_CONTROL Masks */ +#define PORT_EN 0x00000001 /* PPI Port Enable */ +#define PORT_DIR 0x00000002 /* PPI Port Direction */ +#define XFR_TYPE 0x0000000C /* PPI Transfer Type */ +#define PORT_CFG 0x00000030 /* PPI Port Configuration */ +#define FLD_SEL 0x00000040 /* PPI Active Field Select */ +#define PACK_EN 0x00000080 /* PPI Packing Mode */ +#define DMA32 0x00000100 /* PPI 32-bit DMA Enable */ +#define SKIP_EN 0x00000200 /* PPI Skip Element Enable */ +#define SKIP_EO 0x00000400 /* PPI Skip Even/Odd Elements */ +#define DLENGTH 0x00003800 /* PPI Data Length */ +#define DLEN_8 0x0 /* PPI Data Length mask for DLEN=8 */ +#define DLEN(x) (((x-9) & 0x07) << 11) /* PPI Data Length (only works for x=10-->x=16) */ +#define POL 0x0000C000 /* PPI Signal Polarities */ + +/* PPI_STATUS Masks */ +#define FLD 0x00000400 /* Field Indicator */ +#define FT_ERR 0x00000800 /* Frame Track Error */ +#define OVR 0x00001000 /* FIFO Overflow Error */ +#define UNDR 0x00002000 /* FIFO Underrun Error */ +#define ERR_DET 0x00004000 /* Error Detected Indicator */ +#define ERR_NCOR 0x00008000 /* Error Not Corrected Indicator */ + +/* + * DMA CONTROLLER MASKS + */ + +/* DMAx_CONFIG, MDMA_yy_CONFIG Masks */ +#define DMAEN 0x00000001 /* Channel Enable */ +#define WNR 0x00000002 /* Channel Direction (W/R*) */ +#define WDSIZE_8 0x00000000 /* Word Size 8 bits */ +#define WDSIZE_16 0x00000004 /* Word Size 16 bits */ +#define WDSIZE_32 0x00000008 /* Word Size 32 bits */ +#define DMA2D 0x00000010 /* 2D/1D* Mode */ +#define RESTART 0x00000020 /* Restart */ +#define DI_SEL 0x00000040 /* Data Interrupt Select */ +#define DI_EN 0x00000080 /* Data Interrupt Enable */ +#define NDSIZE 0x00000900 /* Next Descriptor Size */ +#define FLOW 0x00007000 /* Flow Control */ + +#define DMAEN_P 0 /* Channel Enable */ +#define WNR_P 1 /* Channel Direction (W/R*) */ +#define DMA2D_P 4 /* 2D/1D* Mode */ +#define RESTART_P 5 /* Restart */ +#define DI_SEL_P 6 /* Data Interrupt Select */ +#define DI_EN_P 7 /* Data Interrupt Enable */ + +/* DMAx_IRQ_STATUS, MDMA_yy_IRQ_STATUS Masks */ +#define DMA_DONE 0x00000001 /* DMA Done Indicator */ +#define DMA_ERR 0x00000002 /* DMA Error Indicator */ +#define DFETCH 0x00000004 /* Descriptor Fetch Indicator */ +#define DMA_RUN 0x00000008 /* DMA Running Indicator */ + +#define DMA_DONE_P 0 /* DMA Done Indicator */ +#define DMA_ERR_P 1 /* DMA Error Indicator */ +#define DFETCH_P 2 /* Descriptor Fetch Indicator */ +#define DMA_RUN_P 3 /* DMA Running Indicator */ + +/* DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP Masks */ +#define CTYPE 0x00000040 /* DMA Channel Type Indicator */ +#define CTYPE_P 6 /* DMA Channel Type Indicator BIT POSITION */ +#define PCAP8 0x00000080 /* DMA 8-bit Operation Indicator */ +#define PCAP16 0x00000100 /* DMA 16-bit Operation Indicator */ +#define PCAP32 0x00000200 /* DMA 32-bit Operation Indicator */ +#define PCAPWR 0x00000400 /* DMA Write Operation Indicator */ +#define PCAPRD 0x00000800 /* DMA Read Operation Indicator */ +#define PMAP 0x00007000 /* DMA Peripheral Map Field */ + +/* + * GENERAL PURPOSE TIMER MASKS + */ + +/* PWM Timer bit definitions */ + +/* TIMER_ENABLE Register */ +#define TIMEN0 0x0001 +#define TIMEN1 0x0002 +#define TIMEN2 0x0004 + +#define TIMEN0_P 0x00 +#define TIMEN1_P 0x01 +#define TIMEN2_P 0x02 + +/* TIMER_DISABLE Register */ +#define TIMDIS0 0x0001 +#define TIMDIS1 0x0002 +#define TIMDIS2 0x0004 + +#define TIMDIS0_P 0x00 +#define TIMDIS1_P 0x01 +#define TIMDIS2_P 0x02 + +/* TIMER_STATUS Register */ +#define TIMIL0 0x0001 +#define TIMIL1 0x0002 +#define TIMIL2 0x0004 +#define TOVL_ERR0 0x0010 +#define TOVL_ERR1 0x0020 +#define TOVL_ERR2 0x0040 +#define TRUN0 0x1000 +#define TRUN1 0x2000 +#define TRUN2 0x4000 + +#define TIMIL0_P 0x00 +#define TIMIL1_P 0x01 +#define TIMIL2_P 0x02 +#define TOVL_ERR0_P 0x04 +#define TOVL_ERR1_P 0x05 +#define TOVL_ERR2_P 0x06 +#define TRUN0_P 0x0C +#define TRUN1_P 0x0D +#define TRUN2_P 0x0E + +/* TIMERx_CONFIG Registers */ +#define PWM_OUT 0x0001 +#define WDTH_CAP 0x0002 +#define EXT_CLK 0x0003 +#define PULSE_HI 0x0004 +#define PERIOD_CNT 0x0008 +#define IRQ_ENA 0x0010 +#define TIN_SEL 0x0020 +#define OUT_DIS 0x0040 +#define CLK_SEL 0x0080 +#define TOGGLE_HI 0x0100 +#define EMU_RUN 0x0200 +#define ERR_TYP(x) ((x & 0x03) << 14) + +#define TMODE_P0 0x00 +#define TMODE_P1 0x01 +#define PULSE_HI_P 0x02 +#define PERIOD_CNT_P 0x03 +#define IRQ_ENA_P 0x04 +#define TIN_SEL_P 0x05 +#define OUT_DIS_P 0x06 +#define CLK_SEL_P 0x07 +#define TOGGLE_HI_P 0x08 +#define EMU_RUN_P 0x09 +#define ERR_TYP_P0 0x0E +#define ERR_TYP_P1 0x0F + +/* + * PROGRAMMABLE FLAG MASKS + */ + +/* General Purpose IO (0xFFC00700 - 0xFFC007FF) Masks */ +#define PF0 0x0001 +#define PF1 0x0002 +#define PF2 0x0004 +#define PF3 0x0008 +#define PF4 0x0010 +#define PF5 0x0020 +#define PF6 0x0040 +#define PF7 0x0080 +#define PF8 0x0100 +#define PF9 0x0200 +#define PF10 0x0400 +#define PF11 0x0800 +#define PF12 0x1000 +#define PF13 0x2000 +#define PF14 0x4000 +#define PF15 0x8000 + +/* General Purpose IO (0xFFC00700 - 0xFFC007FF) BIT POSITIONS */ +#define PF0_P 0 +#define PF1_P 1 +#define PF2_P 2 +#define PF3_P 3 +#define PF4_P 4 +#define PF5_P 5 +#define PF6_P 6 +#define PF7_P 7 +#define PF8_P 8 +#define PF9_P 9 +#define PF10_P 10 +#define PF11_P 11 +#define PF12_P 12 +#define PF13_P 13 +#define PF14_P 14 +#define PF15_P 15 + +/* + * SERIAL PERIPHERAL INTERFACE (SPI) MASKS + */ + +/* SPI_CTL Masks */ +#define TIMOD 0x00000003 /* Transfer initiation mode and interrupt generation */ +#define SZ 0x00000004 /* Send Zero (=0) or last (=1) word when TDBR empty. */ +#define GM 0x00000008 /* When RDBR full, get more (=1) data or discard (=0) incoming Data */ +#define PSSE 0x00000010 /* Enable (=1) Slave-Select input for Master. */ +#define EMISO 0x00000020 /* Enable (=1) MISO pin as an output. */ +#define SIZE 0x00000100 /* Word length (0 => 8 bits, 1 => 16 bits) */ +#define LSBF 0x00000200 /* Data format (0 => MSB sent/received first 1 => LSB sent/received first) */ +#define CPHA 0x00000400 /* Clock phase (0 => SPICLK starts toggling in middle of xfer, 1 => SPICLK toggles at the beginning of xfer. */ +#define CPOL 0x00000800 /* Clock polarity (0 => active-high, 1 => active-low) */ +#define MSTR 0x00001000 /* Configures SPI as master (=1) or slave (=0) */ +#define WOM 0x00002000 /* Open drain (=1) data output enable (for MOSI and MISO) */ +#define SPE 0x00004000 /* SPI module enable (=1), disable (=0) */ + +/* SPI_FLG Masks */ +#define FLS1 0x00000002 /* Enables (=1) SPI_FLOUT1 as flag output for SPI Slave-select */ +#define FLS2 0x00000004 /* Enables (=1) SPI_FLOUT2 as flag output for SPI Slave-select */ +#define FLS3 0x00000008 /* Enables (=1) SPI_FLOUT3 as flag output for SPI Slave-select */ +#define FLS4 0x00000010 /* Enables (=1) SPI_FLOUT4 as flag output for SPI Slave-select */ +#define FLS5 0x00000020 /* Enables (=1) SPI_FLOUT5 as flag output for SPI Slave-select */ +#define FLS6 0x00000040 /* Enables (=1) SPI_FLOUT6 as flag output for SPI Slave-select */ +#define FLS7 0x00000080 /* Enables (=1) SPI_FLOUT7 as flag output for SPI Slave-select */ +#define FLG1 0x00000200 /* Activates (=0) SPI_FLOUT1 as flag output for SPI Slave-select */ +#define FLG2 0x00000400 /* Activates (=0) SPI_FLOUT2 as flag output for SPI Slave-select */ +#define FLG3 0x00000800 /* Activates (=0) SPI_FLOUT3 as flag output for SPI Slave-select */ +#define FLG4 0x00001000 /* Activates (=0) SPI_FLOUT4 as flag output for SPI Slave-select */ +#define FLG5 0x00002000 /* Activates (=0) SPI_FLOUT5 as flag output for SPI Slave-select */ +#define FLG6 0x00004000 /* Activates (=0) SPI_FLOUT6 as flag output for SPI Slave-select */ +#define FLG7 0x00008000 /* Activates (=0) SPI_FLOUT7 as flag output for SPI Slave-select */ + +/* SPI_FLG Bit Positions */ +#define FLS1_P 0x00000001 /* Enables (=1) SPI_FLOUT1 as flag output for SPI Slave-select */ +#define FLS2_P 0x00000002 /* Enables (=1) SPI_FLOUT2 as flag output for SPI Slave-select */ +#define FLS3_P 0x00000003 /* Enables (=1) SPI_FLOUT3 as flag output for SPI Slave-select */ +#define FLS4_P 0x00000004 /* Enables (=1) SPI_FLOUT4 as flag output for SPI Slave-select */ +#define FLS5_P 0x00000005 /* Enables (=1) SPI_FLOUT5 as flag output for SPI Slave-select */ +#define FLS6_P 0x00000006 /* Enables (=1) SPI_FLOUT6 as flag output for SPI Slave-select */ +#define FLS7_P 0x00000007 /* Enables (=1) SPI_FLOUT7 as flag output for SPI Slave-select */ +#define FLG1_P 0x00000009 /* Activates (=0) SPI_FLOUT1 as flag output for SPI Slave-select */ +#define FLG2_P 0x0000000A /* Activates (=0) SPI_FLOUT2 as flag output for SPI Slave-select */ +#define FLG3_P 0x0000000B /* Activates (=0) SPI_FLOUT3 as flag output for SPI Slave-select */ +#define FLG4_P 0x0000000C /* Activates (=0) SPI_FLOUT4 as flag output for SPI Slave-select */ +#define FLG5_P 0x0000000D /* Activates (=0) SPI_FLOUT5 as flag output for SPI Slave-select */ +#define FLG6_P 0x0000000E /* Activates (=0) SPI_FLOUT6 as flag output for SPI Slave-select */ +#define FLG7_P 0x0000000F /* Activates (=0) SPI_FLOUT7 as flag output for SPI Slave-select */ + +/* SPI_STAT Masks */ +#define SPIF 0x00000001 /* Set (=1) when SPI single-word transfer complete */ +#define MODF 0x00000002 /* Set(=1)in a master device when some other device tries to become master */ +#define TXE 0x00000004 /* Set (=1) when transmission occurs with no new data in SPI_TDBR */ +#define TXS 0x00000008 /* SPI_TDBR Data Buffer Status (0=Empty, 1=Full) */ +#define RBSY 0x00000010 /* Set (=1) when data is received with RDBR full */ +#define RXS 0x00000020 /* SPI_RDBR Data Buffer Status (0=Empty, 1=Full) */ +#define TXCOL 0x00000040 /* When set (=1), corrupt data may have been transmitted */ + +/* + * ASYNCHRONOUS MEMORY CONTROLLER MASKS + */ + +/* AMGCTL Masks */ +#define AMCKEN 0x00000001 /* Enable CLKOUT */ +#define AMBEN_B0 0x00000002 /* Enable Asynchronous Memory Bank 0 only */ +#define AMBEN_B0_B1 0x00000004 /* Enable Asynchronous Memory Banks 0 & 1 only */ +#define AMBEN_B0_B1_B2 0x00000006 /* Enable Asynchronous Memory Banks 0, 1, and 2 */ +#define AMBEN_ALL 0x00000008 /* Enable Asynchronous Memory Banks (all) 0, 1, 2, and 3 */ + +/* AMGCTL Bit Positions */ +#define AMCKEN_P 0x00000000 /* Enable CLKOUT */ +#define AMBEN_P0 0x00000001 /* Asynchronous Memory Enable, 000 - banks 0-3 disabled, 001 - Bank 0 enabled */ +#define AMBEN_P1 0x00000002 /* Asynchronous Memory Enable, 010 - banks 0&1 enabled, 011 - banks 0-3 enabled */ +#define AMBEN_P2 0x00000003 /* Asynchronous Memory Enable, 1xx - All banks (bank 0, 1, 2, and 3) enabled */ + +/* AMBCTL0 Masks */ +#define B0RDYEN 0x00000001 /* Bank 0 RDY Enable, 0=disable, 1=enable */ +#define B0RDYPOL 0x00000002 /* Bank 0 RDY Active high, 0=active low, 1=active high */ +#define B0TT_1 0x00000004 /* Bank 0 Transition Time from Read to Write = 1 cycle */ +#define B0TT_2 0x00000008 /* Bank 0 Transition Time from Read to Write = 2 cycles */ +#define B0TT_3 0x0000000C /* Bank 0 Transition Time from Read to Write = 3 cycles */ +#define B0TT_4 0x00000000 /* Bank 0 Transition Time from Read to Write = 4 cycles */ +#define B0ST_1 0x00000010 /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=1 cycle */ +#define B0ST_2 0x00000020 /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=2 cycles */ +#define B0ST_3 0x00000030 /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=3 cycles */ +#define B0ST_4 0x00000000 /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=4 cycles */ +#define B0HT_1 0x00000040 /* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 1 cycle */ +#define B0HT_2 0x00000080 /* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 2 cycles */ +#define B0HT_3 0x000000C0 /* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 3 cycles */ +#define B0HT_0 0x00000000 /* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 0 cycles */ +#define B0RAT_1 0x00000100 /* Bank 0 Read Access Time = 1 cycle */ +#define B0RAT_2 0x00000200 /* Bank 0 Read Access Time = 2 cycles */ +#define B0RAT_3 0x00000300 /* Bank 0 Read Access Time = 3 cycles */ +#define B0RAT_4 0x00000400 /* Bank 0 Read Access Time = 4 cycles */ +#define B0RAT_5 0x00000500 /* Bank 0 Read Access Time = 5 cycles */ +#define B0RAT_6 0x00000600 /* Bank 0 Read Access Time = 6 cycles */ +#define B0RAT_7 0x00000700 /* Bank 0 Read Access Time = 7 cycles */ +#define B0RAT_8 0x00000800 /* Bank 0 Read Access Time = 8 cycles */ +#define B0RAT_9 0x00000900 /* Bank 0 Read Access Time = 9 cycles */ +#define B0RAT_10 0x00000A00 /* Bank 0 Read Access Time = 10 cycles */ +#define B0RAT_11 0x00000B00 /* Bank 0 Read Access Time = 11 cycles */ +#define B0RAT_12 0x00000C00 /* Bank 0 Read Access Time = 12 cycles */ +#define B0RAT_13 0x00000D00 /* Bank 0 Read Access Time = 13 cycles */ +#define B0RAT_14 0x00000E00 /* Bank 0 Read Access Time = 14 cycles */ +#define B0RAT_15 0x00000F00 /* Bank 0 Read Access Time = 15 cycles */ +#define B0WAT_1 0x00001000 /* Bank 0 Write Access Time = 1 cycle */ +#define B0WAT_2 0x00002000 /* Bank 0 Write Access Time = 2 cycles */ +#define B0WAT_3 0x00003000 /* Bank 0 Write Access Time = 3 cycles */ +#define B0WAT_4 0x00004000 /* Bank 0 Write Access Time = 4 cycles */ +#define B0WAT_5 0x00005000 /* Bank 0 Write Access Time = 5 cycles */ +#define B0WAT_6 0x00006000 /* Bank 0 Write Access Time = 6 cycles */ +#define B0WAT_7 0x00007000 /* Bank 0 Write Access Time = 7 cycles */ +#define B0WAT_8 0x00008000 /* Bank 0 Write Access Time = 8 cycles */ +#define B0WAT_9 0x00009000 /* Bank 0 Write Access Time = 9 cycles */ +#define B0WAT_10 0x0000A000 /* Bank 0 Write Access Time = 10 cycles */ +#define B0WAT_11 0x0000B000 /* Bank 0 Write Access Time = 11 cycles */ +#define B0WAT_12 0x0000C000 /* Bank 0 Write Access Time = 12 cycles */ +#define B0WAT_13 0x0000D000 /* Bank 0 Write Access Time = 13 cycles */ +#define B0WAT_14 0x0000E000 /* Bank 0 Write Access Time = 14 cycles */ +#define B0WAT_15 0x0000F000 /* Bank 0 Write Access Time = 15 cycles */ +#define B1RDYEN 0x00010000 /* Bank 1 RDY enable, 0=disable, 1=enable */ +#define B1RDYPOL 0x00020000 /* Bank 1 RDY Active high, 0=active low, 1=active high */ +#define B1TT_1 0x00040000 /* Bank 1 Transition Time from Read to Write = 1 cycle */ +#define B1TT_2 0x00080000 /* Bank 1 Transition Time from Read to Write = 2 cycles */ +#define B1TT_3 0x000C0000 /* Bank 1 Transition Time from Read to Write = 3 cycles */ +#define B1TT_4 0x00000000 /* Bank 1 Transition Time from Read to Write = 4 cycles */ +#define B1ST_1 0x00100000 /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */ +#define B1ST_2 0x00200000 /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */ +#define B1ST_3 0x00300000 /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */ +#define B1ST_4 0x00000000 /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */ +#define B1HT_1 0x00400000 /* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */ +#define B1HT_2 0x00800000 /* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */ +#define B1HT_3 0x00C00000 /* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */ +#define B1HT_0 0x00000000 /* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */ +#define B1RAT_1 0x01000000 /* Bank 1 Read Access Time = 1 cycle */ +#define B1RAT_2 0x02000000 /* Bank 1 Read Access Time = 2 cycles */ +#define B1RAT_3 0x03000000 /* Bank 1 Read Access Time = 3 cycles */ +#define B1RAT_4 0x04000000 /* Bank 1 Read Access Time = 4 cycles */ +#define B1RAT_5 0x05000000 /* Bank 1 Read Access Time = 5 cycles */ +#define B1RAT_6 0x06000000 /* Bank 1 Read Access Time = 6 cycles */ +#define B1RAT_7 0x07000000 /* Bank 1 Read Access Time = 7 cycles */ +#define B1RAT_8 0x08000000 /* Bank 1 Read Access Time = 8 cycles */ +#define B1RAT_9 0x09000000 /* Bank 1 Read Access Time = 9 cycles */ +#define B1RAT_10 0x0A000000 /* Bank 1 Read Access Time = 10 cycles */ +#define B1RAT_11 0x0B000000 /* Bank 1 Read Access Time = 11 cycles */ +#define B1RAT_12 0x0C000000 /* Bank 1 Read Access Time = 12 cycles */ +#define B1RAT_13 0x0D000000 /* Bank 1 Read Access Time = 13 cycles */ +#define B1RAT_14 0x0E000000 /* Bank 1 Read Access Time = 14 cycles */ +#define B1RAT_15 0x0F000000 /* Bank 1 Read Access Time = 15 cycles */ +#define B1WAT_1 0x10000000 /* Bank 1 Write Access Time = 1 cycle */ +#define B1WAT_2 0x20000000 /* Bank 1 Write Access Time = 2 cycles */ +#define B1WAT_3 0x30000000 /* Bank 1 Write Access Time = 3 cycles */ +#define B1WAT_4 0x40000000 /* Bank 1 Write Access Time = 4 cycles */ +#define B1WAT_5 0x50000000 /* Bank 1 Write Access Time = 5 cycles */ +#define B1WAT_6 0x60000000 /* Bank 1 Write Access Time = 6 cycles */ +#define B1WAT_7 0x70000000 /* Bank 1 Write Access Time = 7 cycles */ +#define B1WAT_8 0x80000000 /* Bank 1 Write Access Time = 8 cycles */ +#define B1WAT_9 0x90000000 /* Bank 1 Write Access Time = 9 cycles */ +#define B1WAT_10 0xA0000000 /* Bank 1 Write Access Time = 10 cycles */ +#define B1WAT_11 0xB0000000 /* Bank 1 Write Access Time = 11 cycles */ +#define B1WAT_12 0xC0000000 /* Bank 1 Write Access Time = 12 cycles */ +#define B1WAT_13 0xD0000000 /* Bank 1 Write Access Time = 13 cycles */ +#define B1WAT_14 0xE0000000 /* Bank 1 Write Access Time = 14 cycles */ +#define B1WAT_15 0xF0000000 /* Bank 1 Write Access Time = 15 cycles */ + +/* AMBCTL1 Masks */ +#define B2RDYEN 0x00000001 /* Bank 2 RDY Enable, 0=disable, 1=enable */ +#define B2RDYPOL 0x00000002 /* Bank 2 RDY Active high, 0=active low, 1=active high */ +#define B2TT_1 0x00000004 /* Bank 2 Transition Time from Read to Write = 1 cycle */ +#define B2TT_2 0x00000008 /* Bank 2 Transition Time from Read to Write = 2 cycles */ +#define B2TT_3 0x0000000C /* Bank 2 Transition Time from Read to Write = 3 cycles */ +#define B2TT_4 0x00000000 /* Bank 2 Transition Time from Read to Write = 4 cycles */ +#define B2ST_1 0x00000010 /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */ +#define B2ST_2 0x00000020 /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */ +#define B2ST_3 0x00000030 /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */ +#define B2ST_4 0x00000000 /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */ +#define B2HT_1 0x00000040 /* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */ +#define B2HT_2 0x00000080 /* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */ +#define B2HT_3 0x000000C0 /* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */ +#define B2HT_0 0x00000000 /* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */ +#define B2RAT_1 0x00000100 /* Bank 2 Read Access Time = 1 cycle */ +#define B2RAT_2 0x00000200 /* Bank 2 Read Access Time = 2 cycles */ +#define B2RAT_3 0x00000300 /* Bank 2 Read Access Time = 3 cycles */ +#define B2RAT_4 0x00000400 /* Bank 2 Read Access Time = 4 cycles */ +#define B2RAT_5 0x00000500 /* Bank 2 Read Access Time = 5 cycles */ +#define B2RAT_6 0x00000600 /* Bank 2 Read Access Time = 6 cycles */ +#define B2RAT_7 0x00000700 /* Bank 2 Read Access Time = 7 cycles */ +#define B2RAT_8 0x00000800 /* Bank 2 Read Access Time = 8 cycles */ +#define B2RAT_9 0x00000900 /* Bank 2 Read Access Time = 9 cycles */ +#define B2RAT_10 0x00000A00 /* Bank 2 Read Access Time = 10 cycles */ +#define B2RAT_11 0x00000B00 /* Bank 2 Read Access Time = 11 cycles */ +#define B2RAT_12 0x00000C00 /* Bank 2 Read Access Time = 12 cycles */ +#define B2RAT_13 0x00000D00 /* Bank 2 Read Access Time = 13 cycles */ +#define B2RAT_14 0x00000E00 /* Bank 2 Read Access Time = 14 cycles */ +#define B2RAT_15 0x00000F00 /* Bank 2 Read Access Time = 15 cycles */ +#define B2WAT_1 0x00001000 /* Bank 2 Write Access Time = 1 cycle */ +#define B2WAT_2 0x00002000 /* Bank 2 Write Access Time = 2 cycles */ +#define B2WAT_3 0x00003000 /* Bank 2 Write Access Time = 3 cycles */ +#define B2WAT_4 0x00004000 /* Bank 2 Write Access Time = 4 cycles */ +#define B2WAT_5 0x00005000 /* Bank 2 Write Access Time = 5 cycles */ +#define B2WAT_6 0x00006000 /* Bank 2 Write Access Time = 6 cycles */ +#define B2WAT_7 0x00007000 /* Bank 2 Write Access Time = 7 cycles */ +#define B2WAT_8 0x00008000 /* Bank 2 Write Access Time = 8 cycles */ +#define B2WAT_9 0x00009000 /* Bank 2 Write Access Time = 9 cycles */ +#define B2WAT_10 0x0000A000 /* Bank 2 Write Access Time = 10 cycles */ +#define B2WAT_11 0x0000B000 /* Bank 2 Write Access Time = 11 cycles */ +#define B2WAT_12 0x0000C000 /* Bank 2 Write Access Time = 12 cycles */ +#define B2WAT_13 0x0000D000 /* Bank 2 Write Access Time = 13 cycles */ +#define B2WAT_14 0x0000E000 /* Bank 2 Write Access Time = 14 cycles */ +#define B2WAT_15 0x0000F000 /* Bank 2 Write Access Time = 15 cycles */ +#define B3RDYEN 0x00010000 /* Bank 3 RDY enable, 0=disable, 1=enable */ +#define B3RDYPOL 0x00020000 /* Bank 3 RDY Active high, 0=active low, 1=active high */ +#define B3TT_1 0x00040000 /* Bank 3 Transition Time from Read to Write = 1 cycle */ +#define B3TT_2 0x00080000 /* Bank 3 Transition Time from Read to Write = 2 cycles */ +#define B3TT_3 0x000C0000 /* Bank 3 Transition Time from Read to Write = 3 cycles */ +#define B3TT_4 0x00000000 /* Bank 3 Transition Time from Read to Write = 4 cycles */ +#define B3ST_1 0x00100000 /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */ +#define B3ST_2 0x00200000 /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */ +#define B3ST_3 0x00300000 /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */ +#define B3ST_4 0x00000000 /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */ +#define B3HT_1 0x00400000 /* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */ +#define B3HT_2 0x00800000 /* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */ +#define B3HT_3 0x00C00000 /* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */ +#define B3HT_0 0x00000000 /* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */ +#define B3RAT_1 0x01000000 /* Bank 3 Read Access Time = 1 cycle */ +#define B3RAT_2 0x02000000 /* Bank 3 Read Access Time = 2 cycles */ +#define B3RAT_3 0x03000000 /* Bank 3 Read Access Time = 3 cycles */ +#define B3RAT_4 0x04000000 /* Bank 3 Read Access Time = 4 cycles */ +#define B3RAT_5 0x05000000 /* Bank 3 Read Access Time = 5 cycles */ +#define B3RAT_6 0x06000000 /* Bank 3 Read Access Time = 6 cycles */ +#define B3RAT_7 0x07000000 /* Bank 3 Read Access Time = 7 cycles */ +#define B3RAT_8 0x08000000 /* Bank 3 Read Access Time = 8 cycles */ +#define B3RAT_9 0x09000000 /* Bank 3 Read Access Time = 9 cycles */ +#define B3RAT_10 0x0A000000 /* Bank 3 Read Access Time = 10 cycles */ +#define B3RAT_11 0x0B000000 /* Bank 3 Read Access Time = 11 cycles */ +#define B3RAT_12 0x0C000000 /* Bank 3 Read Access Time = 12 cycles */ +#define B3RAT_13 0x0D000000 /* Bank 3 Read Access Time = 13 cycles */ +#define B3RAT_14 0x0E000000 /* Bank 3 Read Access Time = 14 cycles */ +#define B3RAT_15 0x0F000000 /* Bank 3 Read Access Time = 15 cycles */ +#define B3WAT_1 0x10000000 /* Bank 3 Write Access Time = 1 cycle */ +#define B3WAT_2 0x20000000 /* Bank 3 Write Access Time = 2 cycles */ +#define B3WAT_3 0x30000000 /* Bank 3 Write Access Time = 3 cycles */ +#define B3WAT_4 0x40000000 /* Bank 3 Write Access Time = 4 cycles */ +#define B3WAT_5 0x50000000 /* Bank 3 Write Access Time = 5 cycles */ +#define B3WAT_6 0x60000000 /* Bank 3 Write Access Time = 6 cycles */ +#define B3WAT_7 0x70000000 /* Bank 3 Write Access Time = 7 cycles */ +#define B3WAT_8 0x80000000 /* Bank 3 Write Access Time = 8 cycles */ +#define B3WAT_9 0x90000000 /* Bank 3 Write Access Time = 9 cycles */ +#define B3WAT_10 0xA0000000 /* Bank 3 Write Access Time = 10 cycles */ +#define B3WAT_11 0xB0000000 /* Bank 3 Write Access Time = 11 cycles */ +#define B3WAT_12 0xC0000000 /* Bank 3 Write Access Time = 12 cycles */ +#define B3WAT_13 0xD0000000 /* Bank 3 Write Access Time = 13 cycles */ +#define B3WAT_14 0xE0000000 /* Bank 3 Write Access Time = 14 cycles */ +#define B3WAT_15 0xF0000000 /* Bank 3 Write Access Time = 15 cycles */ + +/* + * SDRAM CONTROLLER MASKS + */ + +/* SDGCTL Masks */ +#define SCTLE 0x00000001 /* Enable SCLK[0], /SRAS, /SCAS, /SWE, SDQM[3:0] */ +#define CL_2 0x00000008 /* SDRAM CAS latency = 2 cycles */ +#define CL_3 0x0000000C /* SDRAM CAS latency = 3 cycles */ +#define PFE 0x00000010 /* Enable SDRAM prefetch */ +#define PFP 0x00000020 /* Prefetch has priority over AMC requests */ +#define TRAS_1 0x00000040 /* SDRAM tRAS = 1 cycle */ +#define TRAS_2 0x00000080 /* SDRAM tRAS = 2 cycles */ +#define TRAS_3 0x000000C0 /* SDRAM tRAS = 3 cycles */ +#define TRAS_4 0x00000100 /* SDRAM tRAS = 4 cycles */ +#define TRAS_5 0x00000140 /* SDRAM tRAS = 5 cycles */ +#define TRAS_6 0x00000180 /* SDRAM tRAS = 6 cycles */ +#define TRAS_7 0x000001C0 /* SDRAM tRAS = 7 cycles */ +#define TRAS_8 0x00000200 /* SDRAM tRAS = 8 cycles */ +#define TRAS_9 0x00000240 /* SDRAM tRAS = 9 cycles */ +#define TRAS_10 0x00000280 /* SDRAM tRAS = 10 cycles */ +#define TRAS_11 0x000002C0 /* SDRAM tRAS = 11 cycles */ +#define TRAS_12 0x00000300 /* SDRAM tRAS = 12 cycles */ +#define TRAS_13 0x00000340 /* SDRAM tRAS = 13 cycles */ +#define TRAS_14 0x00000380 /* SDRAM tRAS = 14 cycles */ +#define TRAS_15 0x000003C0 /* SDRAM tRAS = 15 cycles */ +#define TRP_1 0x00000800 /* SDRAM tRP = 1 cycle */ +#define TRP_2 0x00001000 /* SDRAM tRP = 2 cycles */ +#define TRP_3 0x00001800 /* SDRAM tRP = 3 cycles */ +#define TRP_4 0x00002000 /* SDRAM tRP = 4 cycles */ +#define TRP_5 0x00002800 /* SDRAM tRP = 5 cycles */ +#define TRP_6 0x00003000 /* SDRAM tRP = 6 cycles */ +#define TRP_7 0x00003800 /* SDRAM tRP = 7 cycles */ +#define TRCD_1 0x00008000 /* SDRAM tRCD = 1 cycle */ +#define TRCD_2 0x00010000 /* SDRAM tRCD = 2 cycles */ +#define TRCD_3 0x00018000 /* SDRAM tRCD = 3 cycles */ +#define TRCD_4 0x00020000 /* SDRAM tRCD = 4 cycles */ +#define TRCD_5 0x00028000 /* SDRAM tRCD = 5 cycles */ +#define TRCD_6 0x00030000 /* SDRAM tRCD = 6 cycles */ +#define TRCD_7 0x00038000 /* SDRAM tRCD = 7 cycles */ +#define TWR_1 0x00080000 /* SDRAM tWR = 1 cycle */ +#define TWR_2 0x00100000 /* SDRAM tWR = 2 cycles */ +#define TWR_3 0x00180000 /* SDRAM tWR = 3 cycles */ +#define PUPSD 0x00200000 /* Power-up start delay */ +#define PSM 0x00400000 /* SDRAM power-up sequence = Precharge, mode register set, 8 CBR refresh cycles */ +#define PSS 0x00800000 /* enable SDRAM power-up sequence on next SDRAM access */ +#define SRFS 0x01000000 /* Start SDRAM self-refresh mode */ +#define EBUFE 0x02000000 /* Enable external buffering timing */ +#define FBBRW 0x04000000 /* Fast back-to-back read write enable */ +#define EMREN 0x10000000 /* Extended mode register enable */ +#define TCSR 0x20000000 /* Temp compensated self refresh value 85 deg C */ +#define CDDBG 0x40000000 /* Tristate SDRAM controls during bus grant */ + +/* EBIU_SDBCTL Masks */ +#define EBE 0x00000001 /* Enable SDRAM external bank */ +#define EBSZ_16 0x00000000 /* SDRAM external bank size = 16MB */ +#define EBSZ_32 0x00000002 /* SDRAM external bank size = 32MB */ +#define EBSZ_64 0x00000004 /* SDRAM external bank size = 64MB */ +#define EBSZ_128 0x00000006 /* SDRAM external bank size = 128MB */ +#define EBCAW_8 0x00000000 /* SDRAM external bank column address width = 8 bits */ +#define EBCAW_9 0x00000010 /* SDRAM external bank column address width = 9 bits */ +#define EBCAW_10 0x00000020 /* SDRAM external bank column address width = 9 bits */ +#define EBCAW_11 0x00000030 /* SDRAM external bank column address width = 9 bits */ + +/* EBIU_SDSTAT Masks */ +#define SDCI 0x00000001 /* SDRAM controller is idle */ +#define SDSRA 0x00000002 /* SDRAM SDRAM self refresh is active */ +#define SDPUA 0x00000004 /* SDRAM power up active */ +#define SDRS 0x00000008 /* SDRAM is in reset state */ +#define SDEASE 0x00000010 /* SDRAM EAB sticky error status - W1C */ +#define BGSTAT 0x00000020 /* Bus granted */ + +#endif /* _DEF_BF532_H */ diff --git a/include/asm-blackfin/cpu/defBF533.h b/include/asm-blackfin/cpu/defBF533.h new file mode 100644 index 0000000000..90e50afa7f --- /dev/null +++ b/include/asm-blackfin/cpu/defBF533.h @@ -0,0 +1,24 @@ +/* + * defBF533.h + * + * This file is subject to the terms and conditions of the GNU Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Non-GPL License also available as part of VisualDSP++ + * + * http://www.analog.com/processors/resources/crosscore/visualDspDevSoftware.html + * + * (c) Copyright 2001-2005 Analog Devices, Inc. All rights reserved + * + * This file under source code control, please send bugs or changes to: + * dsptools.support@analog.com + * + */ + +#ifndef _DEFBF533_H +#define _DEFBF533_H + +#include + +#endif /* _DEFBF533_H */ diff --git a/include/asm-blackfin/cpu/defBF533_extn.h b/include/asm-blackfin/cpu/defBF533_extn.h new file mode 100644 index 0000000000..a9a1c7ccbd --- /dev/null +++ b/include/asm-blackfin/cpu/defBF533_extn.h @@ -0,0 +1,76 @@ +/* + * defBF533_extn.h + * + * This file is subject to the terms and conditions of the GNU Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Non-GPL License also available as part of VisualDSP++ + * + * http://www.analog.com/processors/resources/crosscore/visualDspDevSoftware.html + * + * (c) Copyright 2001-2005 Analog Devices, Inc. All rights reserved + * + * This file under source code control, please send bugs or changes to: + * dsptools.support@analog.com + * + */ + +#ifndef _DEF_BF533_EXTN_H +#define _DEF_BF533_EXTN_H + +#define OFFSET_( x ) ((x) & 0x0000FFFF) /* define macro for offset */ +/* Delay inserted for PLL transition */ +#define DELAY 0x1000 + +#define L1_ISRAM 0xFFA00000 +#define L1_ISRAM_END 0xFFA10000 +#define DATA_BANKA_SRAM 0xFF800000 +#define DATA_BANKA_SRAM_END 0xFF808000 +#define DATA_BANKB_SRAM 0xFF900000 +#define DATA_BANKB_SRAM_END 0xFF908000 +#define SYSMMR_BASE 0xFFC00000 +#define WDSIZE16 0x00000004 + +/* Event Vector Table Address */ +#define EVT_EMULATION_ADDR 0xffe02000 +#define EVT_RESET_ADDR 0xffe02004 +#define EVT_NMI_ADDR 0xffe02008 +#define EVT_EXCEPTION_ADDR 0xffe0200c +#define EVT_GLOBAL_INT_ENB_ADDR 0xffe02010 +#define EVT_HARDWARE_ERROR_ADDR 0xffe02014 +#define EVT_TIMER_ADDR 0xffe02018 +#define EVT_IVG7_ADDR 0xffe0201c +#define EVT_IVG8_ADDR 0xffe02020 +#define EVT_IVG9_ADDR 0xffe02024 +#define EVT_IVG10_ADDR 0xffe02028 +#define EVT_IVG11_ADDR 0xffe0202c +#define EVT_IVG12_ADDR 0xffe02030 +#define EVT_IVG13_ADDR 0xffe02034 +#define EVT_IVG14_ADDR 0xffe02038 +#define EVT_IVG15_ADDR 0xffe0203c +#define EVT_OVERRIDE_ADDR 0xffe02100 + +/* IMASK Bit values */ +#define IVG15_POS 0x00008000 +#define IVG14_POS 0x00004000 +#define IVG13_POS 0x00002000 +#define IVG12_POS 0x00001000 +#define IVG11_POS 0x00000800 +#define IVG10_POS 0x00000400 +#define IVG9_POS 0x00000200 +#define IVG8_POS 0x00000100 +#define IVG7_POS 0x00000080 +#define IVGTMR_POS 0x00000040 +#define IVGHW_POS 0x00000020 + +#define WDOG_TMR_DISABLE (0xAD << 4) +#define ICTL_RST 0x00000000 +#define ICTL_NMI 0x00000002 +#define ICTL_GP 0x00000004 +#define ICTL_DISABLE 0x00000003 + +/* Watch Dog timer values setup */ +#define WATCHDOG_DISABLE WDOG_TMR_DISABLE | ICTL_DISABLE + +#endif /* _DEF_BF533_EXTN_H */ diff --git a/include/asm-blackfin/cpu/def_LPBlackfin.h b/include/asm-blackfin/cpu/def_LPBlackfin.h new file mode 100644 index 0000000000..11a6504391 --- /dev/null +++ b/include/asm-blackfin/cpu/def_LPBlackfin.h @@ -0,0 +1,445 @@ +/* + * def_LPBlackfin.h + * + * This file is subject to the terms and conditions of the GNU Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Non-GPL License also available as part of VisualDSP++ + * + * http://www.analog.com/processors/resources/crosscore/visualDspDevSoftware.html + * + * (c) Copyright 2001-2005 Analog Devices, Inc. All rights reserved + * + * This file under source code control, please send bugs or changes to: + * dsptools.support@analog.com + * + */ + +/* LP Blackfin CORE REGISTER BIT & ADDRESS DEFINITIONS FOR ADSP-BF532 */ + +#ifndef _DEF_LPBLACKFIN_H +#define _DEF_LPBLACKFIN_H + +/* + * #if !defined(__ADSPLPBLACKFIN__) + * #warning def_LPBlackfin.h should only be included for 532 compatible chips. + * #endif + */ + +#define MK_BMSK_( x ) (1<31 */ +#define TEST_WAY0 0x00000000 /* Access Way0 */ +#define TEST_WAY1 0x04000000 /* Access Way1 */ + +/* ** ITEST_COMMAND only */ +#define TEST_WAY2 0x08000000 /* Access Way2 */ +#define TEST_WAY3 0x0C000000 /* Access Way3 */ + +/* ** DTEST_COMMAND only */ +#define TEST_BNKSELA 0x00000000 /* Access SuperBank A */ +#define TEST_BNKSELB 0x00800000 /* Access SuperBank B */ + +#endif /* _DEF_LPBLACKFIN_H */ diff --git a/include/asm-blackfin/current.h b/include/asm-blackfin/current.h new file mode 100644 index 0000000000..108c2792a0 --- /dev/null +++ b/include/asm-blackfin/current.h @@ -0,0 +1,40 @@ +/* + * U-boot - current.h + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _BLACKFIN_CURRENT_H +#define _BLACKFIN_CURRENT_H +/* + * current.h + * (C) Copyright 2000, Lineo, David McCullough + * + * rather than dedicate a register (as the m68k source does), we + * just keep a global, we should probably just change it all to be + * current and lose _current_task. + */ + +extern struct task_struct *_current_task; +#define get_current() _current_task +#define current _current_task + +#endif diff --git a/include/asm-blackfin/delay.h b/include/asm-blackfin/delay.h new file mode 100644 index 0000000000..dbb73887ef --- /dev/null +++ b/include/asm-blackfin/delay.h @@ -0,0 +1,55 @@ +/* + * U-boot - delay.h Routines for introducing delays + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _BLACKFIN_DELAY_H +#define _BLACKFIN_DELAY_H + +/* + * Changes made by akbar.hussain@Lineo.com, for BLACKFIN + * Copyright (C) 1994 Hamish Macdonald + * + * Delay routines, using a pre-computed "loops_per_second" value. + */ + +extern __inline__ void __delay(unsigned long loops) +{ + __asm__ __volatile__("1:\t%0 += -1;\n\t" + "cc = %0 == 0;\n\t" + "if ! cc jump 1b;\n":"=d"(loops) + :"0"(loops)); +} + +/* + * Use only for very small delays ( < 1 msec). Should probably use a + * lookup table, really, as the multiplications take much too long with + * short delays. This is a "reasonable" implementation, though (and the + * first constant multiplications gets optimized away if the delay is + * a constant) + */ +extern __inline__ void udelay(unsigned long usecs) +{ + __delay(usecs); +} + +#endif diff --git a/include/asm-blackfin/entry.h b/include/asm-blackfin/entry.h new file mode 100644 index 0000000000..607a5b8e98 --- /dev/null +++ b/include/asm-blackfin/entry.h @@ -0,0 +1,385 @@ +/* + * U-boot - entry.h Routines for context saving and restoring + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __BLACKFIN_ENTRY_H +#define __BLACKFIN_ENTRY_H + +#include +#include +#include + +/* + * Stack layout in 'ret_from_exception': + * + */ + +/* + * Register %p2 is now set to the current task throughout + * the whole kernel. + */ + +#ifdef __ASSEMBLY__ + +#define LFLUSH_I_AND_D 0x00000808 +#define LSIGTRAP 5 + +/* process bits for task_struct.flags */ +#define PF_TRACESYS_OFF 3 +#define PF_TRACESYS_BIT 5 +#define PF_PTRACED_OFF 3 +#define PF_PTRACED_BIT 4 +#define PF_DTRACE_OFF 1 +#define PF_DTRACE_BIT 5 + +#define NEW_PT_REGS + +#if defined(NEW_PT_REGS) + +#define SAVE_ALL_INT save_context_no_interrupts +#define SAVE_ALL_SYS save_context_no_interrupts +#define SAVE_CONTEXT save_context_with_interrupts + +#define RESTORE_ALL restore_context_no_interrupts +#define RESTORE_ALL_SYS restore_context_no_interrupts +#define RESTORE_CONTEXT restore_context_with_interrupts + +#else + +#define SAVE_ALL_INT save_all_int +#define SAVE_ALL_SYS save_all_sys +#define SAVE_CONTEXT save_context +#define RESTORE_ALL restore_context +#define RESTORE_CONTEXT restore_context + +#endif + +/* + * Code to save processor context. + * We even save the register which are preserved by a function call + * - r4, r5, r6, r7, p3, p4, p5 + */ +.macro save_context_with_interrupts + [--sp] = R0; + [--sp] = ( R7:0, P5:0 ); + [--sp] = fp; + [--sp] = usp; + + [--sp] = i0; + [--sp] = i1; + [--sp] = i2; + [--sp] = i3; + + [--sp] = m0; + [--sp] = m1; + [--sp] = m2; + [--sp] = m3; + + [--sp] = l0; + [--sp] = l1; + [--sp] = l2; + [--sp] = l3; + + [--sp] = b0; + [--sp] = b1; + [--sp] = b2; + [--sp] = b3; + [--sp] = a0.x; + [--sp] = a0.w; + [--sp] = a1.x; + [--sp] = a1.w; + + [--sp] = LC0; + [--sp] = LC1; + [--sp] = LT0; + [--sp] = LT1; + [--sp] = LB0; + [--sp] = LB1; + + [--sp] = ASTAT; + + [--sp] = r0; /* Skip reserved */ + [--sp] = RETS; + [--sp] = RETI; + [--sp] = RETX; + [--sp] = RETN; + [--sp] = RETE; + [--sp] = SEQSTAT; + [--sp] = SYSCFG; + [--sp] = r0; /* Skip IPEND as well. */ +.endm + +.macro save_context_no_interrupts + [--sp] = R0; + [--sp] = ( R7:0, P5:0 ); + [--sp] = fp; + [--sp] = usp; + + [--sp] = i0; + [--sp] = i1; + [--sp] = i2; + [--sp] = i3; + + [--sp] = m0; + [--sp] = m1; + [--sp] = m2; + [--sp] = m3; + + [--sp] = l0; + [--sp] = l1; + [--sp] = l2; + [--sp] = l3; + + [--sp] = b0; + [--sp] = b1; + [--sp] = b2; + [--sp] = b3; + [--sp] = a0.x; + [--sp] = a0.w; + [--sp] = a1.x; + [--sp] = a1.w; + + [--sp] = LC0; + [--sp] = LC1; + [--sp] = LT0; + [--sp] = LT1; + [--sp] = LB0; + [--sp] = LB1; + + [--sp] = ASTAT; + + [--sp] = r0; /* Skip reserved */ + [--sp] = RETS; + r0 = RETI; + [--sp] = r0; + [--sp] = RETX; + [--sp] = RETN; + [--sp] = RETE; + [--sp] = SEQSTAT; + [--sp] = SYSCFG; + [--sp] = r0; /* Skip IPEND as well. */ +.endm + +.macro restore_context_no_interrupts + sp += 4; + SYSCFG = [sp++]; + SEQSTAT = [sp++]; + RETE = [sp++]; + RETN = [sp++]; + RETX = [sp++]; + r0 = [sp++]; + RETI = r0; + RETS = [sp++]; + + sp += 4; + + ASTAT = [sp++]; + + LB1 = [sp++]; + LB0 = [sp++]; + LT1 = [sp++]; + LT0 = [sp++]; + LC1 = [sp++]; + LC0 = [sp++]; + + a1.w = [sp++]; + a1.x = [sp++]; + a0.w = [sp++]; + a0.x = [sp++]; + b3 = [sp++]; + b2 = [sp++]; + b1 = [sp++]; + b0 = [sp++]; + + l3 = [sp++]; + l2 = [sp++]; + l1 = [sp++]; + l0 = [sp++]; + + m3 = [sp++]; + m2 = [sp++]; + m1 = [sp++]; + m0 = [sp++]; + + i3 = [sp++]; + i2 = [sp++]; + i1 = [sp++]; + i0 = [sp++]; + + sp += 4; + fp = [sp++]; + + ( R7 : 0, P5 : 0) = [ SP ++ ]; + sp += 4; +.endm + +.macro restore_context_with_interrupts + sp += 4; + SYSCFG = [sp++]; + SEQSTAT = [sp++]; + RETE = [sp++]; + RETN = [sp++]; + RETX = [sp++]; + RETI = [sp++]; + RETS = [sp++]; + + sp += 4; + + ASTAT = [sp++]; + + LB1 = [sp++]; + LB0 = [sp++]; + LT1 = [sp++]; + LT0 = [sp++]; + LC1 = [sp++]; + LC0 = [sp++]; + + a1.w = [sp++]; + a1.x = [sp++]; + a0.w = [sp++]; + a0.x = [sp++]; + b3 = [sp++]; + b2 = [sp++]; + b1 = [sp++]; + b0 = [sp++]; + + l3 = [sp++]; + l2 = [sp++]; + l1 = [sp++]; + l0 = [sp++]; + + m3 = [sp++]; + m2 = [sp++]; + m1 = [sp++]; + m0 = [sp++]; + + i3 = [sp++]; + i2 = [sp++]; + i1 = [sp++]; + i0 = [sp++]; + + sp += 4; + fp = [sp++]; + + ( R7 : 0, P5 : 0) = [ SP ++ ]; + sp += 4; +.endm + +#if !defined(NEW_PT_REGS) +/* + * a -1 in the orig_r0 field signifies + * that the stack frame is NOT for syscall + */ +.macro save_all_int +/* reserved and disable the single step of SYSCFG, by Steven Chen 03/07/10 */ + [--sp] = r0; + r0.l = 0x30; /* Errata for BF533 */ + r0.h = 0x0; + syscfg = r0; /* disable single step flag in SYSCFG */ + r0 = [sp++]; + [--sp] = syscfg; /* store SYSCFG */ + + [--sp] = r0; /* Reserved for IPEND */ + [--sp] = fp; + [--sp] = usp; + [--sp] = r0; + + [--sp] = r0; + r0 = [sp + 8]; + [--sp] = a0.x; + [--sp] = a1.x; + [--sp] = a0.w; + [--sp] = a1.w; + [--sp] = rets; + [--sp] = astat; + [--sp] = seqstat; + [--sp] = retx; /* current pc when exception happens */ + [--sp] = ( r7:5, p5:0 ); + [--sp] = r1; + [--sp] = r2; + [--sp] = r4; + [--sp] = r3; +.endm + +.macro save_all_sys + [--sp] = r0; + [--sp] = r0; + [--sp] = a0.x; + [--sp] = a1.x; + [--sp] = a0.w; + [--sp] = a1.w; + [--sp] = rets; + [--sp] = astat; + [--sp] = seqstat; + [--sp] = retx; /* current pc when exception happens */ + [--sp] = ( r7:5, p5:0 ); + [--sp] = r1; + [--sp] = r2; + [--sp] = r4; + [--sp] = r3; +.endm + +.macro restore_all + r3 = [sp++]; + r4 = [sp++]; + r2 = [sp++]; + r1 = [sp++]; + ( r7:5, p5:0 ) = [sp++]; + retx = [sp++]; + seqstat = [sp++]; + astat = [sp++]; + rets = [sp++]; + a1.w = [sp++]; + a0.w = [sp++]; + a1.x = [sp++]; + a0.x = [sp++]; + sp += 4; /* orig r0 */ + r0 = [sp++]; + + sp += 4; + fp = [sp++]; + sp +=4; /* Skip the IPEND */ + + syscfg = [sp++]; + +.endm + +#endif + +#define STR(X) STR1(X) +#define STR1(X) #X + +#if defined(NEW_PT_REGS) + +#define PT_OFF_ORIG_R0 208 +#define PT_OFF_SR 8 + +#else + +#define PT_OFF_ORIG_R0 0x54 +#define PT_OFF_SR 0x38 /* seqstat in pt_regs */ + +#endif +#endif + +#endif diff --git a/include/asm-blackfin/errno.h b/include/asm-blackfin/errno.h new file mode 100644 index 0000000000..713bba0b22 --- /dev/null +++ b/include/asm-blackfin/errno.h @@ -0,0 +1,156 @@ +/* + * U-boot - errno.h Error number defines + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _BLACKFIN_ERRNO_H +#define _BLACKFIN_ERRNO_H + +#define EPERM 1 /* Operation not permitted */ +#define ENOENT 2 /* No such file or directory */ +#define ESRCH 3 /* No such process */ +#define EINTR 4 /* Interrupted system call */ +#define EIO 5 /* I/O error */ +#define ENXIO 6 /* No such device or address */ +#define E2BIG 7 /* Arg list too long */ +#define ENOEXEC 8 /* Exec format error */ +#define EBADF 9 /* Bad file number */ +#define ECHILD 10 /* No child processes */ +#define EAGAIN 11 /* Try again */ +#define ENOMEM 12 /* Out of memory */ +#define EACCES 13 /* Permission denied */ +#define EFAULT 14 /* Bad address */ +#define ENOTBLK 15 /* Block device required */ +#define EBUSY 16 /* Device or resource busy */ +#define EEXIST 17 /* File exists */ +#define EXDEV 18 /* Cross-device link */ +#define ENODEV 19 /* No such device */ +#define ENOTDIR 20 /* Not a directory */ +#define EISDIR 21 /* Is a directory */ +#define EINVAL 22 /* Invalid argument */ +#define ENFILE 23 /* File table overflow */ +#define EMFILE 24 /* Too many open files */ +#define ENOTTY 25 /* Not a typewriter */ +#define ETXTBSY 26 /* Text file busy */ +#define EFBIG 27 /* File too large */ +#define ENOSPC 28 /* No space left on device */ +#define ESPIPE 29 /* Illegal seek */ +#define EROFS 30 /* Read-only file system */ +#define EMLINK 31 /* Too many links */ +#define EPIPE 32 /* Broken pipe */ +#define EDOM 33 /* Math argument out of domain of func */ +#define ERANGE 34 /* Math result not representable */ +#define EDEADLK 35 /* Resource deadlock would occur */ +#define ENAMETOOLONG 36 /* File name too long */ +#define ENOLCK 37 /* No record locks available */ +#define ENOSYS 38 /* Function not implemented */ +#define ENOTEMPTY 39 /* Directory not empty */ +#define ELOOP 40 /* Too many symbolic links encountered */ +#define EWOULDBLOCK EAGAIN /* Operation would block */ +#define ENOMSG 42 /* No message of desired type */ +#define EIDRM 43 /* Identifier removed */ +#define ECHRNG 44 /* Channel number out of range */ +#define EL2NSYNC 45 /* Level 2 not synchronized */ +#define EL3HLT 46 /* Level 3 halted */ +#define EL3RST 47 /* Level 3 reset */ +#define ELNRNG 48 /* Link number out of range */ +#define EUNATCH 49 /* Protocol driver not attached */ +#define ENOCSI 50 /* No CSI structure available */ +#define EL2HLT 51 /* Level 2 halted */ +#define EBADE 52 /* Invalid exchange */ +#define EBADR 53 /* Invalid request descriptor */ +#define EXFULL 54 /* Exchange full */ +#define ENOANO 55 /* No anode */ +#define EBADRQC 56 /* Invalid request code */ +#define EBADSLT 57 /* Invalid slot */ + +#define EDEADLOCK EDEADLK + +#define EBFONT 59 /* Bad font file format */ +#define ENOSTR 60 /* Device not a stream */ +#define ENODATA 61 /* No data available */ +#define ETIME 62 /* Timer expired */ +#define ENOSR 63 /* Out of streams resources */ +#define ENONET 64 /* Machine is not on the network */ +#define ENOPKG 65 /* Package not installed */ +#define EREMOTE 66 /* Object is remote */ +#define ENOLINK 67 /* Link has been severed */ +#define EADV 68 /* Advertise error */ +#define ESRMNT 69 /* Srmount error */ +#define ECOMM 70 /* Communication error on send */ +#define EPROTO 71 /* Protocol error */ +#define EMULTIHOP 72 /* Multihop attempted */ +#define EDOTDOT 73 /* RFS specific error */ +#define EBADMSG 74 /* Not a data message */ +#define EOVERFLOW 75 /* Value too large for defined data type */ +#define ENOTUNIQ 76 /* Name not unique on network */ +#define EBADFD 77 /* File descriptor in bad state */ +#define EREMCHG 78 /* Remote address changed */ +#define ELIBACC 79 /* Can not access a needed shared library */ +#define ELIBBAD 80 /* Accessing a corrupted shared library */ +#define ELIBSCN 81 /* .lib section in a.out corrupted */ +#define ELIBMAX 82 /* Attempting to link in too many shared libraries */ +#define ELIBEXEC 83 /* Cannot exec a shared library directly */ +#define EILSEQ 84 /* Illegal byte sequence */ +#define ERESTART 85 /* Interrupted system call should be restarted */ +#define ESTRPIPE 86 /* Streams pipe error */ +#define EUSERS 87 /* Too many users */ +#define ENOTSOCK 88 /* Socket operation on non-socket */ +#define EDESTADDRREQ 89 /* Destination address required */ +#define EMSGSIZE 90 /* Message too long */ +#define EPROTOTYPE 91 /* Protocol wrong type for socket */ +#define ENOPROTOOPT 92 /* Protocol not available */ +#define EPROTONOSUPPORT 93 /* Protocol not supported */ +#define ESOCKTNOSUPPORT 94 /* Socket type not supported */ +#define EOPNOTSUPP 95 /* Operation not supported on transport endpoint */ +#define EPFNOSUPPORT 96 /* Protocol family not supported */ +#define EAFNOSUPPORT 97 /* Address family not supported by protocol */ +#define EADDRINUSE 98 /* Address already in use */ +#define EADDRNOTAVAIL 99 /* Cannot assign requested address */ +#define ENETDOWN 100 /* Network is down */ +#define ENETUNREACH 101 /* Network is unreachable */ +#define ENETRESET 102 /* Network dropped connection because of reset */ +#define ECONNABORTED 103 /* Software caused connection abort */ +#define ECONNRESET 104 /* Connection reset by peer */ +#define ENOBUFS 105 /* No buffer space available */ +#define EISCONN 106 /* Transport endpoint is already connected */ +#define ENOTCONN 107 /* Transport endpoint is not connected */ +#define ESHUTDOWN 108 /* Cannot send after transport endpoint shutdown */ +#define ETOOMANYREFS 109 /* Too many references: cannot splice */ +#define ETIMEDOUT 110 /* Connection timed out */ +#define ECONNREFUSED 111 /* Connection refused */ +#define EHOSTDOWN 112 /* Host is down */ +#define EHOSTUNREACH 113 /* No route to host */ +#define EALREADY 114 /* Operation already in progress */ +#define EINPROGRESS 115 /* Operation now in progress */ +#define ESTALE 116 /* Stale NFS file handle */ +#define EUCLEAN 117 /* Structure needs cleaning */ +#define ENOTNAM 118 /* Not a XENIX named type file */ +#define ENAVAIL 119 /* No XENIX semaphores available */ +#define EISNAM 120 /* Is a named type file */ +#define EREMOTEIO 121 /* Remote I/O error */ +#define EDQUOT 122 /* Quota exceeded */ + +#define ENOMEDIUM 123 /* No medium found */ +#define EMEDIUMTYPE 124 /* Wrong medium type */ + +#endif diff --git a/include/asm-blackfin/global_data.h b/include/asm-blackfin/global_data.h new file mode 100644 index 0000000000..56a12f07b3 --- /dev/null +++ b/include/asm-blackfin/global_data.h @@ -0,0 +1,64 @@ +/* + * U-boot - global_data.h Declarations for global data of u-boot + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __ASM_GBL_DATA_H +#define __ASM_GBL_DATA_H + +#include + +/* + * The following data structure is placed in some memory wich is + * available very early after boot (like DPRAM on MPC8xx/MPC82xx, or + * some locked parts of the data cache) to allow for a minimum set of + * global variables during system initialization (until we have set + * up the memory controller so that we can use RAM). + * + * Keep it *SMALL* and remember to set CFG_GBL_DATA_SIZE > sizeof(gd_t) + */ +typedef struct global_data { + bd_t *bd; + unsigned long flags; + unsigned long board_type; + unsigned long baudrate; + unsigned long have_console; /* serial_init() was called */ + unsigned long ram_size; /* RAM size */ + unsigned long reloc_off; /* Relocation Offset */ + unsigned long env_addr; /* Address of Environment struct */ + unsigned long env_valid; /* Checksum of Environment valid? */ + void **jt; /* jump table */ +} gd_t; + +/* + * Global Data Flags + */ +#define GD_FLG_RELOC 0x00001 /* Code was relocated to RAM */ +#define GD_FLG_DEVINIT 0x00002 /* Devices have been initialized */ +#define GD_FLG_SILENT 0x00004 /* Silent mode */ + +#define DECLARE_GLOBAL_DATA_PTR register volatile gd_t *gd asm ("P5") + +#endif diff --git a/include/asm-blackfin/hw_irq.h b/include/asm-blackfin/hw_irq.h new file mode 100644 index 0000000000..1ee050ec14 --- /dev/null +++ b/include/asm-blackfin/hw_irq.h @@ -0,0 +1,37 @@ +/* + * U-boot - hw_irq.h + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * This file is based on + * linux/arch/$(ARCH)/platform/$(PLATFORM)/hw_irq.h + * BlackFin (ADI) assembler restricted values by Ted Ma + * Copyright (c) 2002 Arcturus Networks Inc. (www.arcturusnetworks.com) + * Copyright (c) 2002 Lineo, Inc + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#ifdef CONFIG_EZKIT533 +#include +#endif +#ifdef CONFIG_STAMP +#include +#endif diff --git a/include/asm-blackfin/io-kernel.h b/include/asm-blackfin/io-kernel.h new file mode 100644 index 0000000000..0b0572ffa4 --- /dev/null +++ b/include/asm-blackfin/io-kernel.h @@ -0,0 +1,135 @@ +/* + * U-boot - io-kernel.h + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _BLACKFIN_IO_H +#define _BLACKFIN_IO_H + +#ifdef __KERNEL__ + +#include + +/* + * These are for ISA/PCI shared memory _only_ and should never be used + * on any other type of memory, including Zorro memory. They are meant to + * access the bus in the bus byte order which is little-endian!. + * + * readX/writeX() are used to access memory mapped devices. On some + * architectures the memory mapped IO stuff needs to be accessed + * differently. On the m68k architecture, we just read/write the + * memory location directly. + */ +/* ++roman: The assignments to temp. vars avoid that gcc sometimes generates + * two accesses to memory, which may be undesireable for some devices. + */ +#define readb(addr) ({ unsigned char __v = (*(volatile unsigned char *) (addr));asm("ssync;"); __v; }) +#define readw(addr) ({ unsigned short __v = (*(volatile unsigned short *) (addr)); asm("ssync;");__v; }) +#define readl(addr) ({ unsigned int __v = (*(volatile unsigned int *) (addr));asm("ssync;"); __v; }) +#define writeb(b,addr) (void)((*(volatile unsigned char *) (addr)) = (b)) +#define writew(b,addr) (void)((*(volatile unsigned short *) (addr)) = (b)) +#define writel(b,addr) (void)((*(volatile unsigned int *) (addr)) = (b)) +#define __raw_readb readb +#define __raw_readw readw +#define __raw_readl readl +#define __raw_writeb writeb +#define __raw_writew writew +#define __raw_writel writel +#define memset_io(a,b,c) memset((void *)(a),(b),(c)) +#define memcpy_fromio(a,b,c) memcpy((a),(void *)(b),(c)) +#define memcpy_toio(a,b,c) memcpy((void *)(a),(b),(c)) +#define inb(addr) cf_inb((volatile unsigned char*)(addr)) +#define inw(addr) readw(addr) +#define inl(addr) readl(addr) +#define outb(x,addr) cf_outb((unsigned char)(x), (volatile unsigned char*)(addr)) +#define outw(x,addr) ((void) writew(x,addr)) +#define outl(x,addr) ((void) writel(x,addr)) +#define inb_p(addr) inb(addr) +#define inw_p(addr) inw(addr) +#define inl_p(addr) inl(addr) +#define outb_p(x,addr) outb(x,addr) +#define outw_p(x,addr) outw(x,addr) +#define outl_p(x,addr) outl(x,addr) +#define insb(port, addr, count) memcpy((void*)addr, (void*)port, count) +#define insw(port, addr, count) cf_insw((unsigned short*)addr, (unsigned short*)(port), (count)) +#define insl(port, addr, count) memcpy((void*)addr, (void*)port, (4*count)) +#define outsb(port, addr, count) memcpy((void*)port, (void*)addr, count) +#define outsw(port,addr,count) cf_outsw((unsigned short*)(port), (unsigned short*)addr, (count)) +#define outsl(port, addr, count) memcpy((void*)port, (void*)addr, (4*count)) +#define IO_SPACE_LIMIT 0xffff + +/* Values for nocacheflag and cmode */ +#define IOMAP_FULL_CACHING 0 +#define IOMAP_NOCACHE_SER 1 +#define IOMAP_NOCACHE_NONSER 2 +#define IOMAP_WRITETHROUGH 3 + +#ifndef __ASSEMBLY__ +extern void *__ioremap(unsigned long physaddr, unsigned long size, int cacheflag); +extern void __iounmap(void *addr, unsigned long size); +extern inline void *ioremap(unsigned long physaddr, unsigned long size) +{ + return __ioremap(physaddr, size, IOMAP_NOCACHE_SER); +} +extern inline void *ioremap_nocache(unsigned long physaddr, unsigned long size) +{ + return __ioremap(physaddr, size, IOMAP_NOCACHE_SER); +} +extern inline void *ioremap_writethrough(unsigned long physaddr, unsigned long size) +{ + return __ioremap(physaddr, size, IOMAP_WRITETHROUGH); +} +extern inline void *ioremap_fullcache(unsigned long physaddr, unsigned long size) +{ + return __ioremap(physaddr, size, IOMAP_FULL_CACHING); +} + +extern void iounmap(void *addr); + +/* Nothing to do */ + +extern void blkfin_inv_cache_all(void); + +#endif + +#define dma_cache_inv(_start,_size) do { blkfin_inv_cache_all();} while (0) +#define dma_cache_wback(_start,_size) do { } while (0) +#define dma_cache_wback_inv(_start,_size) do { blkfin_inv_cache_all();} while (0) + +/* Pages to physical address... */ +#define page_to_phys(page) ((page - mem_map) << PAGE_SHIFT) +#define page_to_bus(page) ((page - mem_map) << PAGE_SHIFT) + +#define mm_ptov(vaddr) ((void *) (vaddr)) +#define mm_vtop(vaddr) ((unsigned long) (vaddr)) +#define phys_to_virt(vaddr) ((void *) (vaddr)) +#define virt_to_phys(vaddr) ((unsigned long) (vaddr)) + +#define virt_to_bus virt_to_phys +#define bus_to_virt phys_to_virt + +#endif + +#endif diff --git a/include/asm-blackfin/io.h b/include/asm-blackfin/io.h new file mode 100644 index 0000000000..e5b388e262 --- /dev/null +++ b/include/asm-blackfin/io.h @@ -0,0 +1,122 @@ +/* + * U-boot - io.h IO routines + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _BLACKFIN_IO_H +#define _BLACKFIN_IO_H + +#ifdef __KERNEL__ + +#include + +/* function prototypes for CF support */ +extern void cf_outsw(unsigned short *addr, unsigned short *sect_buf, int words); +extern void cf_insw(unsigned short *sect_buf, unsigned short *addr, int words); +extern unsigned char cf_inb(volatile unsigned char *addr); +extern void cf_outb(unsigned char val, volatile unsigned char* addr); + +/* + * These are for ISA/PCI shared memory _only_ and should never be used + * on any other type of memory, including Zorro memory. They are meant to + * access the bus in the bus byte order which is little-endian!. + * + * readX/writeX() are used to access memory mapped devices. On some + * architectures the memory mapped IO stuff needs to be accessed + * differently. On the m68k architecture, we just read/write the + * memory location directly. + */ + + +#define readb(addr) ({ unsigned char __v = (*(volatile unsigned char *) (addr));asm("ssync;"); __v; }) +#define readw(addr) ({ unsigned short __v = (*(volatile unsigned short *) (addr)); asm("ssync;");__v; }) +#define readl(addr) ({ unsigned int __v = (*(volatile unsigned int *) (addr));asm("ssync;"); __v; }) + +#define writeb(b,addr) {((*(volatile unsigned char *) (addr)) = (b)); asm("ssync;");} +#define writew(b,addr) {((*(volatile unsigned short *) (addr)) = (b)); asm("ssync;");} +#define writel(b,addr) {((*(volatile unsigned int *) (addr)) = (b)); asm("ssync;");} + +#define memset_io(a,b,c) memset((void *)(a),(b),(c)) +#define memcpy_fromio(a,b,c) memcpy((a),(void *)(b),(c)) +#define memcpy_toio(a,b,c) memcpy((void *)(a),(b),(c)) + +#define inb_p(addr) readb((addr) + BF533_PCIIO_BASE) +#define inb(addr) cf_inb((volatile unsigned char*)(addr)) + +#define outb(x,addr) cf_outb((unsigned char)(x), (volatile unsigned char*)(addr)) +#define outb_p(x,addr) outb(x, (addr) + BF533_PCIIO_BASE) + +#define inw(addr) readw((addr) + BF533_PCIIO_BASE) +#define inl(addr) readl((addr) + BF533_PCIIO_BASE) + +#define outw(x,addr) writew(x, (addr) + BF533_PCIIO_BASE) +#define outl(x,addr) writel(x, (addr) + BF533_PCIIO_BASE) + +#define insb(port, addr, count) memcpy((void*)addr, (void*)(BF533_PCIIO_BASE + port), count) +#define insw(port, addr, count) cf_insw((unsigned short*)addr, (unsigned short*)(port), (count)) +#define insl(port, addr, count) memcpy((void*)addr, (void*)(BF533_PCIIO_BASE + port), (4*count)) + +#define outsb(port,addr,count) memcpy((void*)(BF533_PCIIO_BASE + port), (void*)addr, count) +#define outsw(port,addr,count) cf_outsw((unsigned short*)(port), (unsigned short*)addr, (count)) +#define outsl(port,addr,count) memcpy((void*)(BF533_PCIIO_BASE + port), (void*)addr, (4*count)) + +#define IO_SPACE_LIMIT 0xffff + +/* Values for nocacheflag and cmode */ +#define IOMAP_FULL_CACHING 0 +#define IOMAP_NOCACHE_SER 1 +#define IOMAP_NOCACHE_NONSER 2 +#define IOMAP_WRITETHROUGH 3 + +extern void *__ioremap(unsigned long physaddr, unsigned long size, + int cacheflag); +extern void __iounmap(void *addr, unsigned long size); + +extern inline void *ioremap(unsigned long physaddr, unsigned long size) +{ + return __ioremap(physaddr, size, IOMAP_NOCACHE_SER); +} +extern inline void *ioremap_nocache(unsigned long physaddr, + unsigned long size) +{ + return __ioremap(physaddr, size, IOMAP_NOCACHE_SER); +} +extern inline void *ioremap_writethrough(unsigned long physaddr, + unsigned long size) +{ + return __ioremap(physaddr, size, IOMAP_WRITETHROUGH); +} +extern inline void *ioremap_fullcache(unsigned long physaddr, + unsigned long size) +{ + return __ioremap(physaddr, size, IOMAP_FULL_CACHING); +} + +extern void iounmap(void *addr); + +extern void blkfin_inv_cache_all(void); +#define dma_cache_inv(_start,_size) do { blkfin_inv_cache_all();} while (0) +#define dma_cache_wback(_start,_size) do { } while (0) +#define dma_cache_wback_inv(_start,_size) do { blkfin_inv_cache_all();} while (0) + +#endif +#endif diff --git a/include/asm-blackfin/irq.h b/include/asm-blackfin/irq.h new file mode 100644 index 0000000000..5fbc5a363b --- /dev/null +++ b/include/asm-blackfin/irq.h @@ -0,0 +1,142 @@ +/* + * U-boot - irq.h Interrupt related header file + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * This file was based on + * linux/arch/$(ARCH)/platform/$(PLATFORM)/irq.c + * + * Changed by HuTao Apr18, 2003 + * + * Copyright was missing when I got the code so took from MIPS arch ...MaTed--- + * Copyright (C) 1994 by Waldorf GMBH, written by Ralf Baechle + * Copyright (C) 1995, 96, 97, 98, 99, 2000, 2001 by Ralf Baechle + * + * Adapted for BlackFin (ADI) by Ted Ma + * Copyright (c) 2002 Arcturus Networks Inc. (www.arcturusnetworks.com) + * Copyright (c) 2002 Lineo, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _BLACKFIN_IRQ_H_ +#define _BLACKFIN_IRQ_H_ + +#include +#include + +/* + * On the Blackfin, the interrupt structure allows remmapping of the hardware + * levels. + * - I'm going to assume that the H/W level is going to stay at the default + * settings. If someone wants to go through and abstart this out, feel free + * to mod the interrupt numbering scheme. + * - I'm abstracting the interrupts so that uClinux does not know anything + * about the H/W levels. If you want to change the H/W AND keep the abstracted + * levels that uClinux sees, you should be able to do most of it here. + * - I've left the "abstract" numbering sparce in case someone wants to pull the + * interrupts apart (just the TX/RX for the various devices) + */ + +#define NR_IRQS SYS_IRQS +/* + * "Generic" interrupt sources + */ +#define IRQ_SCHED_TIMER (8) /* interrupt source for scheduling timer */ + +static __inline__ int irq_cannonicalize(int irq) +{ + return irq; +} + +/* + * Machine specific interrupt sources. + * + * Adding an interrupt service routine for a source with this bit + * set indicates a special machine specific interrupt source. + * The machine specific files define these sources. + * + * The IRQ_MACHSPEC bit is now gone - the only thing it did was to + * introduce unnecessary overhead. + * + * All interrupt handling is actually machine specific so it is better + * to use function pointers, as used by the Sparc port, and select the + * interrupt handling functions when initializing the kernel. This way + * we save some unnecessary overhead at run-time. + * 01/11/97 - Jes + */ + +extern void (*mach_enable_irq) (unsigned int); +extern void (*mach_disable_irq) (unsigned int); +extern int sys_request_irq(unsigned int, + void (*)(int, void *, struct pt_regs *), + unsigned long, const char *, void *); +extern void sys_free_irq(unsigned int, void *); + +/* + * various flags for request_irq() - the Amiga now uses the standard + * mechanism like all other architectures - SA_INTERRUPT and SA_SHIRQ + * are your friends. + */ +#define IRQ_FLG_LOCK (0x0001) /* handler is not replaceable */ +#define IRQ_FLG_REPLACE (0x0002) /* replace existing handler */ +#define IRQ_FLG_FAST (0x0004) +#define IRQ_FLG_SLOW (0x0008) +#define IRQ_FLG_STD (0x8000) /* internally used */ + +/* + * This structure is used to chain together the ISRs for a particular + * interrupt source (if it supports chaining). + */ +typedef struct irq_node { + void (*handler) (int, void *, struct pt_regs *); + unsigned long flags; + void *dev_id; + const char *devname; + struct irq_node *next; +} irq_node_t; + +/* + * This structure has only 4 elements for speed reasons + */ +typedef struct irq_handler { + void (*handler) (int, void *, struct pt_regs *); + unsigned long flags; + void *dev_id; + const char *devname; +} irq_handler_t; + +/* count of spurious interrupts */ +extern volatile unsigned int num_spurious; + +/* + * This function returns a new irq_node_t + */ +extern irq_node_t *new_irq_node(void); + +/* + * Some drivers want these entry points + */ +#define enable_irq(x) (mach_enable_irq ? (*mach_enable_irq)(x) : 0) +#define disable_irq(x) (mach_disable_irq ? (*mach_disable_irq)(x) : 0) + +#define enable_irq_nosync(x) enable_irq(x) +#define disable_irq_nosync(x) disable_irq(x) + +#endif diff --git a/include/asm-blackfin/linkage.h b/include/asm-blackfin/linkage.h new file mode 100644 index 0000000000..18f0c36d24 --- /dev/null +++ b/include/asm-blackfin/linkage.h @@ -0,0 +1,60 @@ +/* + * U-boot - linkage.h + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _LINUX_LINKAGE_H +#define _LINUX_LINKAGE_H + +#include + +#ifdef __cplusplus +#define CPP_ASMLINKAGE extern "C" +#else +#define CPP_ASMLINKAGE +#endif + +#define asmlinkage CPP_ASMLINKAGE + +#define SYMBOL_NAME_STR(X) #X +#define SYMBOL_NAME(X) X +#ifdef __STDC__ +#define SYMBOL_NAME_LABEL(X) X##: +#else +#define SYMBOL_NAME_LABEL(X) X: +#endif + +#define __ALIGN .align 4 +#define __ALIGN_STR ".align 4" + +#ifdef __ASSEMBLY__ + +#define ALIGN __ALIGN +#define ALIGN_STR __ALIGN_STR + +#define ENTRY(name) \ + .globl SYMBOL_NAME(name); \ + ALIGN; \ + SYMBOL_NAME_LABEL(name) +#endif + +#endif diff --git a/include/asm-blackfin/machdep.h b/include/asm-blackfin/machdep.h new file mode 100644 index 0000000000..0a43ba1c5a --- /dev/null +++ b/include/asm-blackfin/machdep.h @@ -0,0 +1,89 @@ +/* + * U-boot - machdep.h + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _BLACKFIN_MACHDEP_H +#define _BLACKFIN_MACHDEP_H + +/* Machine dependent initial routines: + * + * Based on include/asm-m68knommu/machdep.h + * For blackfin, just now we only have bfin, so they'd point to the default bfin + * + */ + +struct pt_regs; +struct kbd_repeat; +struct mktime; +struct hwclk_time; +struct gendisk; +struct buffer_head; + +extern void (*mach_sched_init) (void (*handler) (int, void *, struct pt_regs *)); + +/* machine dependent keyboard functions */ +extern int (*mach_keyb_init) (void); +extern int (*mach_kbdrate) (struct kbd_repeat *); +extern void (*mach_kbd_leds) (unsigned int); + +/* machine dependent irq functions */ +extern void (*mach_init_IRQ) (void); +extern void (*(*mach_default_handler)[]) (int, void *, struct pt_regs *); +extern int (*mach_request_irq) (unsigned int irq, + void (*handler) (int, void *, + struct pt_regs *), + unsigned long flags, const char *devname, + void *dev_id); +extern void (*mach_free_irq) (unsigned int irq, void *dev_id); +extern void (*mach_get_model) (char *model); +extern int (*mach_get_hardware_list) (char *buffer); +extern int (*mach_get_irq_list) (char *buf); +extern void (*mach_process_int) (int irq, struct pt_regs * fp); + +/* machine dependent timer functions */ +extern unsigned long (*mach_gettimeoffset) (void); +extern void (*mach_gettod) (int *year, int *mon, int *day, int *hour, + int *min, int *sec); +extern int (*mach_hwclk) (int, struct hwclk_time *); +extern int (*mach_set_clock_mmss) (unsigned long); +extern void (*mach_reset) (void); +extern void (*mach_halt) (void); +extern void (*mach_power_off) (void); +extern unsigned long (*mach_hd_init) (unsigned long, unsigned long); +extern void (*mach_hd_setup) (char *, int *); +extern long mach_max_dma_address; +extern void (*mach_floppy_setup) (char *, int *); +extern void (*mach_floppy_eject) (void); +extern void (*mach_heartbeat) (int); +extern void (*mach_l2_flush) (int); +extern int mach_sysrq_key; +extern int mach_sysrq_shift_state; +extern int mach_sysrq_shift_mask; +extern char *mach_sysrq_xlate; + +#ifdef CONFIG_UCLINUX +extern void config_BSP(char *command, int len); +extern void (*mach_tick) (void); +#endif + +#endif diff --git a/include/asm-blackfin/mem_init.h b/include/asm-blackfin/mem_init.h new file mode 100644 index 0000000000..1a13d908e0 --- /dev/null +++ b/include/asm-blackfin/mem_init.h @@ -0,0 +1,287 @@ +/* + * U-boot - mem_init.h Header file for memory initialization + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#if ( CONFIG_MEM_MT48LC16M16A2TG_75 || CONFIG_MEM_MT48LC64M4A2FB_7E ) + #if ( CONFIG_SCLK_HZ > 119402985 ) + #define SDRAM_tRP TRP_2 + #define SDRAM_tRP_num 2 + #define SDRAM_tRAS TRAS_7 + #define SDRAM_tRAS_num 7 + #define SDRAM_tRCD TRCD_2 + #define SDRAM_tWR TWR_2 + #endif + #if ( CONFIG_SCLK_HZ > 104477612 ) && ( CONFIG_SCLK_HZ <= 119402985 ) + #define SDRAM_tRP TRP_2 + #define SDRAM_tRP_num 2 + #define SDRAM_tRAS TRAS_6 + #define SDRAM_tRAS_num 6 + #define SDRAM_tRCD TRCD_2 + #define SDRAM_tWR TWR_2 + #endif + #if ( CONFIG_SCLK_HZ > 89552239 ) && ( CONFIG_SCLK_HZ <= 104477612 ) + #define SDRAM_tRP TRP_2 + #define SDRAM_tRP_num 2 + #define SDRAM_tRAS TRAS_5 + #define SDRAM_tRAS_num 5 + #define SDRAM_tRCD TRCD_2 + #define SDRAM_tWR TWR_2 + #endif + #if ( CONFIG_SCLK_HZ > 74626866 ) && ( CONFIG_SCLK_HZ <= 89552239 ) + #define SDRAM_tRP TRP_2 + #define SDRAM_tRP_num 2 + #define SDRAM_tRAS TRAS_4 + #define SDRAM_tRAS_num 4 + #define SDRAM_tRCD TRCD_2 + #define SDRAM_tWR TWR_2 + #endif + #if ( CONFIG_SCLK_HZ > 66666667 ) && ( CONFIG_SCLK_HZ <= 74626866 ) + #define SDRAM_tRP TRP_2 + #define SDRAM_tRP_num 2 + #define SDRAM_tRAS TRAS_3 + #define SDRAM_tRAS_num 3 + #define SDRAM_tRCD TRCD_2 + #define SDRAM_tWR TWR_2 + #endif + #if ( CONFIG_SCLK_HZ > 59701493 ) && ( CONFIG_SCLK_HZ <= 66666667 ) + #define SDRAM_tRP TRP_1 + #define SDRAM_tRP_num 1 + #define SDRAM_tRAS TRAS_4 + #define SDRAM_tRAS_num 3 + #define SDRAM_tRCD TRCD_1 + #define SDRAM_tWR TWR_2 + #endif + #if ( CONFIG_SCLK_HZ > 44776119 ) && ( CONFIG_SCLK_HZ <= 59701493 ) + #define SDRAM_tRP TRP_1 + #define SDRAM_tRP_num 1 + #define SDRAM_tRAS TRAS_3 + #define SDRAM_tRAS_num 3 + #define SDRAM_tRCD TRCD_1 + #define SDRAM_tWR TWR_2 + #endif + #if ( CONFIG_SCLK_HZ > 29850746 ) && ( CONFIG_SCLK_HZ <= 44776119 ) + #define SDRAM_tRP TRP_1 + #define SDRAM_tRP_num 1 + #define SDRAM_tRAS TRAS_2 + #define SDRAM_tRAS_num 2 + #define SDRAM_tRCD TRCD_1 + #define SDRAM_tWR TWR_2 + #endif + #if ( CONFIG_SCLK_HZ <= 29850746 ) + #define SDRAM_tRP TRP_1 + #define SDRAM_tRP_num 1 + #define SDRAM_tRAS TRAS_1 + #define SDRAM_tRAS_num 1 + #define SDRAM_tRCD TRCD_1 + #define SDRAM_tWR TWR_2 + #endif +#endif + +#if (CONFIG_MEM_MT48LC16M16A2TG_75) + /*SDRAM INFORMATION: */ + #define SDRAM_Tref 64 /* Refresh period in milliseconds */ + #define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */ + #define SDRAM_CL CL_3 +#endif + +#if (CONFIG_MEM_MT48LC64M4A2FB_7E) + /*SDRAM INFORMATION: */ + #define SDRAM_Tref 64 /* Refresh period in milliseconds */ + #define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */ + #define SDRAM_CL CL_2 +#endif + +#if ( CONFIG_MEM_SIZE == 128 ) + #define SDRAM_SIZE EBSZ_128 +#endif +#if ( CONFIG_MEM_SIZE == 64 ) + #define SDRAM_SIZE EBSZ_64 +#endif +#if ( CONFIG_MEM_SIZE == 32 ) + #define SDRAM_SIZE EBSZ_32 +#endif +#if ( CONFIG_MEM_SIZE == 16 ) + #define SDRAM_SIZE EBSZ_16 +#endif +#if ( CONFIG_MEM_ADD_WDTH == 11 ) + #define SDRAM_WIDTH EBCAW_11 +#endif +#if ( CONFIG_MEM_ADD_WDTH == 10 ) + #define SDRAM_WIDTH EBCAW_10 +#endif +#if ( CONFIG_MEM_ADD_WDTH == 9 ) + #define SDRAM_WIDTH EBCAW_9 +#endif +#if ( CONFIG_MEM_ADD_WDTH == 8 ) + #define SDRAM_WIDTH EBCAW_8 +#endif + +#define mem_SDBCTL SDRAM_WIDTH | SDRAM_SIZE | EBE + +/* Equation from section 17 (p17-46) of BF533 HRM */ +#define mem_SDRRC ((( CONFIG_SCLK_HZ / 1000) * SDRAM_Tref) / SDRAM_NRA) - (SDRAM_tRAS_num + SDRAM_tRP_num) + +/* Enable SCLK Out */ +#define mem_SDGCTL ( SCTLE | SDRAM_CL | SDRAM_tRAS | SDRAM_tRP | SDRAM_tRCD | SDRAM_tWR | PSS ) + +#define flash_EBIU_AMBCTL_WAT ( ( CONFIG_FLASH_SPEED_BWAT * 4 ) / ( 4000000000 / CONFIG_SCLK_HZ ) ) + 1 +#define flash_EBIU_AMBCTL_RAT ( ( CONFIG_FLASH_SPEED_BRAT * 4 ) / ( 4000000000 / CONFIG_SCLK_HZ ) ) + 1 +#define flash_EBIU_AMBCTL_HT ( ( CONFIG_FLASH_SPEED_BHT * 4 ) / ( 4000000000 / CONFIG_SCLK_HZ ) ) +#define flash_EBIU_AMBCTL_ST ( ( CONFIG_FLASH_SPEED_BST * 4 ) / ( 4000000000 / CONFIG_SCLK_HZ ) ) + 1 +#define flash_EBIU_AMBCTL_TT ( ( CONFIG_FLASH_SPEED_BTT * 4 ) / ( 4000000000 / CONFIG_SCLK_HZ ) ) + 1 + +#if (flash_EBIU_AMBCTL_TT > 3 ) + #define flash_EBIU_AMBCTL0_TT B0TT_4 +#endif +#if (flash_EBIU_AMBCTL_TT == 3 ) + #define flash_EBIU_AMBCTL0_TT B0TT_3 +#endif +#if (flash_EBIU_AMBCTL_TT == 2 ) + #define flash_EBIU_AMBCTL0_TT B0TT_2 +#endif +#if (flash_EBIU_AMBCTL_TT < 2 ) + #define flash_EBIU_AMBCTL0_TT B0TT_1 +#endif + +#if (flash_EBIU_AMBCTL_ST > 3 ) + #define flash_EBIU_AMBCTL0_ST B0ST_4 +#endif +#if (flash_EBIU_AMBCTL_ST == 3 ) + #define flash_EBIU_AMBCTL0_ST B0ST_3 +#endif +#if (flash_EBIU_AMBCTL_ST == 2 ) + #define flash_EBIU_AMBCTL0_ST B0ST_2 +#endif +#if (flash_EBIU_AMBCTL_ST < 2 ) + #define flash_EBIU_AMBCTL0_ST B0ST_1 +#endif + +#if (flash_EBIU_AMBCTL_HT > 2 ) + #define flash_EBIU_AMBCTL0_HT B0HT_3 +#endif +#if (flash_EBIU_AMBCTL_HT == 2 ) + #define flash_EBIU_AMBCTL0_HT B0HT_2 +#endif +#if (flash_EBIU_AMBCTL_HT == 1 ) + #define flash_EBIU_AMBCTL0_HT B0HT_1 +#endif +#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT == 0) + #define flash_EBIU_AMBCTL0_HT B0HT_0 +#endif +#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT != 0) + #define flash_EBIU_AMBCTL0_HT B0HT_1 +#endif + +#if (flash_EBIU_AMBCTL_WAT > 14) + #define flash_EBIU_AMBCTL0_WAT B0WAT_15 +#endif +#if (flash_EBIU_AMBCTL_WAT == 14) + #define flash_EBIU_AMBCTL0_WAT B0WAT_14 +#endif +#if (flash_EBIU_AMBCTL_WAT == 13) + #define flash_EBIU_AMBCTL0_WAT B0WAT_13 +#endif +#if (flash_EBIU_AMBCTL_WAT == 12) + #define flash_EBIU_AMBCTL0_WAT B0WAT_12 +#endif +#if (flash_EBIU_AMBCTL_WAT == 11) + #define flash_EBIU_AMBCTL0_WAT B0WAT_11 +#endif +#if (flash_EBIU_AMBCTL_WAT == 10) + #define flash_EBIU_AMBCTL0_WAT B0WAT_10 +#endif +#if (flash_EBIU_AMBCTL_WAT == 9) + #define flash_EBIU_AMBCTL0_WAT B0WAT_9 +#endif +#if (flash_EBIU_AMBCTL_WAT == 8) + #define flash_EBIU_AMBCTL0_WAT B0WAT_8 +#endif +#if (flash_EBIU_AMBCTL_WAT == 7) + #define flash_EBIU_AMBCTL0_WAT B0WAT_7 +#endif +#if (flash_EBIU_AMBCTL_WAT == 6) + #define flash_EBIU_AMBCTL0_WAT B0WAT_6 +#endif +#if (flash_EBIU_AMBCTL_WAT == 5) + #define flash_EBIU_AMBCTL0_WAT B0WAT_5 +#endif +#if (flash_EBIU_AMBCTL_WAT == 4) + #define flash_EBIU_AMBCTL0_WAT B0WAT_4 +#endif +#if (flash_EBIU_AMBCTL_WAT == 3) + #define flash_EBIU_AMBCTL0_WAT B0WAT_3 +#endif +#if (flash_EBIU_AMBCTL_WAT == 2) + #define flash_EBIU_AMBCTL0_WAT B0WAT_2 +#endif +#if (flash_EBIU_AMBCTL_WAT == 1) + #define flash_EBIU_AMBCTL0_WAT B0WAT_1 +#endif + +#if (flash_EBIU_AMBCTL_RAT > 14) + #define flash_EBIU_AMBCTL0_RAT B0RAT_15 +#endif +#if (flash_EBIU_AMBCTL_RAT == 14) + #define flash_EBIU_AMBCTL0_RAT B0RAT_14 +#endif +#if (flash_EBIU_AMBCTL_RAT == 13) + #define flash_EBIU_AMBCTL0_RAT B0RAT_13 +#endif +#if (flash_EBIU_AMBCTL_RAT == 12) + #define flash_EBIU_AMBCTL0_RAT B0RAT_12 +#endif +#if (flash_EBIU_AMBCTL_RAT == 11) + #define flash_EBIU_AMBCTL0_RAT B0RAT_11 +#endif +#if (flash_EBIU_AMBCTL_RAT == 10) + #define flash_EBIU_AMBCTL0_RAT B0RAT_10 +#endif +#if (flash_EBIU_AMBCTL_RAT == 9) + #define flash_EBIU_AMBCTL0_RAT B0RAT_9 +#endif +#if (flash_EBIU_AMBCTL_RAT == 8) + #define flash_EBIU_AMBCTL0_RAT B0RAT_8 +#endif +#if (flash_EBIU_AMBCTL_RAT == 7) + #define flash_EBIU_AMBCTL0_RAT B0RAT_7 +#endif +#if (flash_EBIU_AMBCTL_RAT == 6) + #define flash_EBIU_AMBCTL0_RAT B0RAT_6 +#endif +#if (flash_EBIU_AMBCTL_RAT == 5) + #define flash_EBIU_AMBCTL0_RAT B0RAT_5 +#endif +#if (flash_EBIU_AMBCTL_RAT == 4) + #define flash_EBIU_AMBCTL0_RAT B0RAT_4 +#endif +#if (flash_EBIU_AMBCTL_RAT == 3) + #define flash_EBIU_AMBCTL0_RAT B0RAT_3 +#endif +#if (flash_EBIU_AMBCTL_RAT == 2) + #define flash_EBIU_AMBCTL0_RAT B0RAT_2 +#endif +#if (flash_EBIU_AMBCTL_RAT == 1) + #define flash_EBIU_AMBCTL0_RAT B0RAT_1 +#endif + +#define flash_EBIU_AMBCTL0 flash_EBIU_AMBCTL0_WAT | flash_EBIU_AMBCTL0_RAT | flash_EBIU_AMBCTL0_HT | flash_EBIU_AMBCTL0_ST | flash_EBIU_AMBCTL0_TT | CONFIG_FLASH_SPEED_RDYEN diff --git a/include/asm-blackfin/page.h b/include/asm-blackfin/page.h new file mode 100644 index 0000000000..406ece5377 --- /dev/null +++ b/include/asm-blackfin/page.h @@ -0,0 +1,128 @@ +/* + * U-boot - page.h + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _BLACKFIN_PAGE_H +#define _BLACKFIN_PAGE_H + +#include + +/* PAGE_SHIFT determines the page size */ + +#define PAGE_SHIFT (12) +#define PAGE_SIZE (4096) +#define PAGE_MASK (~(PAGE_SIZE-1)) + +#ifdef __KERNEL__ + +#include + +#if PAGE_SHIFT < 13 +#define KTHREAD_SIZE (8192) +#else +#define KTHREAD_SIZE PAGE_SIZE +#endif + +#ifndef __ASSEMBLY__ + +#define get_user_page(vaddr) __get_free_page(GFP_KERNEL) +#define free_user_page(page, addr) free_page(addr) + +#define clear_page(page) memset((page), 0, PAGE_SIZE) +#define copy_page(to,from) memcpy((to), (from), PAGE_SIZE) + +#define clear_user_page(page, vaddr) clear_page(page) +#define copy_user_page(to, from, vaddr) copy_page(to, from) + +/* + * These are used to make use of C type-checking.. + */ +typedef struct { + unsigned long pte; +} pte_t; +typedef struct { + unsigned long pmd[16]; +} pmd_t; +typedef struct { + unsigned long pgd; +} pgd_t; +typedef struct { + unsigned long pgprot; +} pgprot_t; + +#define pte_val(x) ((x).pte) +#define pmd_val(x) ((&x)->pmd[0]) +#define pgd_val(x) ((x).pgd) +#define pgprot_val(x) ((x).pgprot) + +#define __pte(x) ((pte_t) { (x) } ) +#define __pmd(x) ((pmd_t) { (x) } ) +#define __pgd(x) ((pgd_t) { (x) } ) +#define __pgprot(x) ((pgprot_t) { (x) } ) + +/* to align the pointer to the (next) page boundary */ +#define PAGE_ALIGN(addr) (((addr)+PAGE_SIZE-1)&PAGE_MASK) + +/* Pure 2^n version of get_order */ +extern __inline__ int get_order(unsigned long size) +{ + int order; + + size = (size - 1) >> (PAGE_SHIFT - 1); + order = -1; + do { + size >>= 1; + order++; + } while (size); + return order; +} + +#endif /* !__ASSEMBLY__ */ + +#include + +#define PAGE_OFFSET (PAGE_OFFSET_RAW) + +#ifndef __ASSEMBLY__ + +#define __pa(vaddr) virt_to_phys((void *)vaddr) +#define __va(paddr) phys_to_virt((unsigned long)paddr) + +#define MAP_NR(addr) (((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT) +#define virt_to_page(addr) (mem_map + (((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT)) +#define VALID_PAGE(page) ((page - mem_map) < max_mapnr) + +#define BUG() do { \ + \ + while (1); /* dead-loop */ \ +} while (0) + +#define PAGE_BUG(page) do { \ + BUG(); \ +} while (0) + +#endif + +#endif + +#endif diff --git a/include/asm-blackfin/page_offset.h b/include/asm-blackfin/page_offset.h new file mode 100644 index 0000000000..45e34b5178 --- /dev/null +++ b/include/asm-blackfin/page_offset.h @@ -0,0 +1,35 @@ +/* + * U-boot - page_offset.h + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * Changes made by Akbar Hussain April 10, 2001 + */ + +#include + +/* This handles the memory map.. */ + +#ifdef CONFIG_BLACKFIN +#define PAGE_OFFSET_RAW 0x00000000 +#endif diff --git a/include/asm-blackfin/posix_types.h b/include/asm-blackfin/posix_types.h new file mode 100644 index 0000000000..f1f2b5ffc2 --- /dev/null +++ b/include/asm-blackfin/posix_types.h @@ -0,0 +1,90 @@ +/* + * U-boot - posix_types.h + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __ARCH_BLACKFIN_POSIX_TYPES_H +#define __ARCH_BLACKFIN_POSIX_TYPES_H + +/* + * This file is generally used by user-level software, so you need to + * be a little careful about namespace pollution etc. Also, we cannot + * assume GCC is being used. + */ + +typedef unsigned short __kernel_dev_t; +typedef unsigned long __kernel_ino_t; +typedef unsigned short __kernel_mode_t; +typedef unsigned short __kernel_nlink_t; +typedef long __kernel_off_t; +typedef int __kernel_pid_t; +typedef unsigned short __kernel_ipc_pid_t; +typedef unsigned short __kernel_uid_t; +typedef unsigned short __kernel_gid_t; +typedef unsigned int __kernel_size_t; +typedef int __kernel_ssize_t; +typedef int __kernel_ptrdiff_t; +typedef long __kernel_time_t; +typedef long __kernel_suseconds_t; +typedef long __kernel_clock_t; +typedef int __kernel_daddr_t; +typedef char *__kernel_caddr_t; +typedef unsigned short __kernel_uid16_t; +typedef unsigned short __kernel_gid16_t; +typedef unsigned int __kernel_uid32_t; +typedef unsigned int __kernel_gid32_t; + +typedef unsigned short __kernel_old_uid_t; +typedef unsigned short __kernel_old_gid_t; + +#ifdef __GNUC__ +typedef long long __kernel_loff_t; +#endif + +typedef struct { +#if defined(__KERNEL__) || defined(__USE_ALL) + int val[2]; +#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */ + int __val[2]; +#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */ +} __kernel_fsid_t; + +#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) + +#undef __FD_SET +#define __FD_SET(d, set) ((set)->fds_bits[__FDELT(d)] |= __FDMASK(d)) + +#undef __FD_CLR +#define __FD_CLR(d, set) ((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d)) + +#undef __FD_ISSET +#define __FD_ISSET(d, set) ((set)->fds_bits[__FDELT(d)] & __FDMASK(d)) + +#undef __FD_ZERO +#define __FD_ZERO(fdsetp) (memset (fdsetp, 0, sizeof(*(fd_set *)fdsetp))) + +#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */ + +#endif diff --git a/include/asm-blackfin/processor.h b/include/asm-blackfin/processor.h new file mode 100644 index 0000000000..19bd720106 --- /dev/null +++ b/include/asm-blackfin/processor.h @@ -0,0 +1,174 @@ +/* + * U-boot - processor.h + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * This file is based on + * include/asm-m68k/processor.h + * Changes made by Akbar Hussain Lineo, Inc, May 2001 for BLACKFIN + * Copyright (C) 1995 Hamish Macdonald + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __ASM_BLACKFIN_PROCESSOR_H +#define __ASM_BLACKFIN_PROCESSOR_H + +/* + * Default implementation of macro that returns current + * instruction pointer ("program counter"). + */ +#define current_text_addr() ({ __label__ _l; _l: &&_l;}) + +#include +#include +#include +#include + +extern inline unsigned long rdusp(void) +{ + unsigned long usp; + + __asm__ __volatile__("%0 = usp;\n\t":"=da"(usp)); + return usp; +} + +extern inline void wrusp(unsigned long usp) +{ + __asm__ __volatile__("usp = %0;\n\t"::"da"(usp)); +} + +/* + * User space process size: 3.75GB. This is hardcoded into a few places, + * so don't change it unless you know what you are doing. + */ +#define TASK_SIZE (0xF0000000UL) + +/* + * Bus types + */ +#define EISA_bus 0 +#define MCA_bus 0 + +/* There is no pc register avaliable for BLACKFIN, so we are going to get + * it indirectly + */ + +#if 0 +inline unsigned long obtain_pc_indirectly(void) +{ + unsigned long pc; + __asm__ __volatile__("%0 = rets;\n":"=d"(pc)); + return (pc - 4); /* call pcrel24 is 4 bytes long */ +} +#endif + +/* + * if you change this structure, you must change the code and offsets + * in m68k/machasm.S + */ + +struct thread_struct { + unsigned long ksp; /* kernel stack pointer */ + unsigned long usp; /* user stack pointer */ + unsigned short seqstat; /* saved status register */ + unsigned long esp0; /* points to SR of stack frame pt_regs */ + unsigned long pc; /* instruction pointer */ +}; + +#define INIT_MMAP { &init_mm, 0, 0x40000000, NULL, __pgprot(_PAGE_PRESENT|_PAGE_ACCESSED), VM_READ | VM_WRITE | VM_EXEC, 1, NULL, NULL } + +#define INIT_THREAD { \ + sizeof(init_stack) + (unsigned long) init_stack, 0, \ + PS_S, 0\ +} + +/* + * Do necessary setup to start up a newly executed thread. + * + * pass the data segment into user programs if it exists, + * it can't hurt anything as far as I can tell + */ +#define start_thread(_regs, _pc, _usp) \ +do { \ + set_fs(USER_DS); /* reads from user space */ \ + (_regs)->pc = (_pc); \ + if (current->mm) \ + (_regs)->r5 = current->mm->start_data; \ + (_regs)->seqstat &= ~0x0c00; \ + wrusp(_usp); \ + /* Adde by HuTao, May 26, 2003 3:39PM */\ + if ((_regs)->ipend & 0x8000) /* check whether system in supper mode - StChen */\ + (_regs)->ipend = 0x0;\ +} while(0) + +/* Forward declaration, a strange C thing */ +struct task_struct; + +/* Free all resources held by a thread. */ +static inline void release_thread(struct task_struct *dead_task) +{ +} + +extern int kernel_thread(int (*fn) (void *), void *arg, + unsigned long flags); + +#define copy_segments(tsk, mm) do { } while (0) +#define release_segments(mm) do { } while (0) +#define forget_segments() do { } while (0) + +/* + * Free current thread data structures etc.. + */ +static inline void exit_thread(void) +{ +} + +/* + * Return saved PC of a blocked thread. + */ +extern inline unsigned long thread_saved_pc(struct thread_struct *t) +{ + extern void scheduling_functions_start_here(void); + extern void scheduling_functions_end_here(void); + return 0; +} + +unsigned long get_wchan(struct task_struct *p); + +#define KSTK_EIP(tsk) \ + ({ \ + unsigned long eip = 0; \ + if ((tsk)->thread.esp0 > PAGE_SIZE && \ + MAP_NR((tsk)->thread.esp0) < max_mapnr) \ + eip = ((struct pt_regs *) (tsk)->thread.esp0)->pc; \ + eip; }) +#define KSTK_ESP(tsk) ((tsk) == current ? rdusp() : (tsk)->thread.usp) +#define THREAD_SIZE (2*PAGE_SIZE) + +/* Allocation and freeing of basic task resources. */ +#define alloc_task_struct() \ + ((struct task_struct *) __get_free_pages(GFP_KERNEL,1)) +#define free_task_struct(p) free_pages((unsigned long)(p),1) +#define get_task_struct(tsk) atomic_inc(&mem_map[MAP_NR(tsk)].count) + +#define init_task (init_task_union.task) +#define init_stack (init_task_union.stack) + +#endif diff --git a/include/asm-blackfin/ptrace.h b/include/asm-blackfin/ptrace.h new file mode 100644 index 0000000000..afd57773ac --- /dev/null +++ b/include/asm-blackfin/ptrace.h @@ -0,0 +1,269 @@ +/* + * U-boot - ptrace.h + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _BLACKFIN_PTRACE_H +#define _BLACKFIN_PTRACE_H + +#define NEW_PT_REGS + +/* + * GCC defines register number like this: + * ----------------------------- + * 0 - 7 are data registers R0-R7 + * 8 - 15 are address registers P0-P7 + * 16 - 31 dsp registers I/B/L0 -- I/B/L3 & M0--M3 + * 32 - 33 A registers A0 & A1 + * 34 - status register + * + * We follows above, except: + * 32-33 --- Low 32-bit of A0&1 + * 34-35 --- High 8-bit of A0&1 + */ + +#if defined(NEW_PT_REGS) + +#define PT_IPEND 0 +#define PT_SYSCFG (PT_IPEND+4) +#define PT_SEQSTAT (PT_SYSCFG+4) +#define PT_RETE (PT_SEQSTAT+4) +#define PT_RETN (PT_RETE+4) +#define PT_RETX (PT_RETN+4) +#define PT_RETI (PT_RETX+4) +#define PT_PC PT_RETI +#define PT_RETS (PT_RETI+4) +#define PT_RESERVED (PT_RETS+4) +#define PT_ASTAT (PT_RESERVED+4) +#define PT_LB1 (PT_ASTAT+4) +#define PT_LB0 (PT_LB1+4) +#define PT_LT1 (PT_LB0+4) +#define PT_LT0 (PT_LT1+4) +#define PT_LC1 (PT_LT0+4) +#define PT_LC0 (PT_LC1+4) +#define PT_A1W (PT_LC0+4) +#define PT_A1X (PT_A1W+4) +#define PT_A0W (PT_A1X+4) +#define PT_A0X (PT_A0W+4) +#define PT_B3 (PT_A0X+4) +#define PT_B2 (PT_B3+4) +#define PT_B1 (PT_B2+4) +#define PT_B0 (PT_B1+4) +#define PT_L3 (PT_B0+4) +#define PT_L2 (PT_L3+4) +#define PT_L1 (PT_L2+4) +#define PT_L0 (PT_L1+4) +#define PT_M3 (PT_L0+4) +#define PT_M2 (PT_M3+4) +#define PT_M1 (PT_M2+4) +#define PT_M0 (PT_M1+4) +#define PT_I3 (PT_M0+4) +#define PT_I2 (PT_I3+4) +#define PT_I1 (PT_I2+4) +#define PT_I0 (PT_I1+4) +#define PT_USP (PT_I0+4) +#define PT_FP (PT_USP+4) +#define PT_P5 (PT_FP+4) +#define PT_P4 (PT_P5+4) +#define PT_P3 (PT_P4+4) +#define PT_P2 (PT_P3+4) +#define PT_P1 (PT_P2+4) +#define PT_P0 (PT_P1+4) +#define PT_R7 (PT_P0+4) +#define PT_R6 (PT_R7+4) +#define PT_R5 (PT_R6+4) +#define PT_R4 (PT_R5+4) +#define PT_R3 (PT_R4+4) +#define PT_R2 (PT_R3+4) +#define PT_R1 (PT_R2+4) +#define PT_R0 (PT_R1+4) +#define PT_ORIG_R0 (PT_R0+4) +#define PT_SR PT_SEQSTAT + +#else +/* + * Here utilize blackfin : dpregs = [pregs + imm16s4] + * [pregs + imm16s4] = dpregs + * to access defferent saved reg in stack + */ +#define PT_R3 0 +#define PT_R4 4 +#define PT_R2 8 +#define PT_R1 12 +#define PT_P5 16 +#define PT_P4 20 +#define PT_P3 24 +#define PT_P2 28 +#define PT_P1 32 +#define PT_P0 36 +#define PT_R7 40 +#define PT_R6 44 +#define PT_R5 48 +#define PT_PC 52 +#define PT_SEQSTAT 56 /* so-called SR reg */ +#define PT_SR PT_SEQSTAT +#define PT_ASTAT 60 +#define PT_RETS 64 +#define PT_A1w 68 +#define PT_A0w 72 +#define PT_A1x 76 +#define PT_A0x 80 +#define PT_ORIG_R0 84 +#define PT_R0 88 +#define PT_USP 92 +#define PT_FP 96 +#define PT_SP 100 + +/* Added by HuTao, May26 2003 3:18PM */ +#define PT_IPEND 100 + +/* Add SYSCFG register for single stepping support */ +#define PT_SYSCFG 104 + +#endif + +#ifndef __ASSEMBLY__ + +#if defined(NEW_PT_REGS) +/* this struct defines the way the registers are stored on the + * stack during a system call. + */ +struct pt_regs { + long ipend; + long syscfg; + long seqstat; + long rete; + long retn; + long retx; + long pc; + long rets; + long reserved; + long astat; + long lb1; + long lb0; + long lt1; + long lt0; + long lc1; + long lc0; + long a1w; + long a1x; + long a0w; + long a0x; + long b3; + long b2; + long b1; + long b0; + long l3; + long l2; + long l1; + long l0; + long m3; + long m2; + long m1; + long m0; + long i3; + long i2; + long i1; + long i0; + long usp; + long fp; + long p5; + long p4; + long p3; + long p2; + long p1; + long p0; + long r7; + long r6; + long r5; + long r4; + long r3; + long r2; + long r1; + long r0; + long orig_r0; +}; + +#else +/* now we don't know what regs the system call will use */ +struct pt_regs { + long r3; + long r4; + long r2; + long r1; + long p5; + long p4; + long p3; + long p2; + long p1; + long p0; + long r7; + long r6; + long r5; + unsigned long pc; + unsigned long seqstat; + unsigned long astat; + unsigned long rets; + long a1w; + long a0w; + long a1x; + long a0x; + long orig_r0; + long r0; + long usp; + long fp; +/* + * Added for supervisor/user mode switch. + * + * HuTao May26 03 3:23PM + */ + long ipend; + long syscfg; +}; + +#endif + +/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */ +#define PTRACE_GETREGS 12 +#define PTRACE_SETREGS 13 /* ptrace signal */ + +#ifdef __KERNEL__ + +#ifndef PS_S +#define PS_S (0x0c00) + +/* Bit 11:10 of SEQSTAT defines user/supervisor/debug mode + * 00: user + * 01: supervisor + * 1x: debug + */ + +#define PS_M (0x1000) /* I am not sure why this is required here Akbar */ +#endif + +#define user_mode(regs) (!((regs)->seqstat & PS_S)) +#define instruction_pointer(regs) ((regs)->pc) +extern void show_regs(struct pt_regs *); + +#endif +#endif +#endif diff --git a/include/asm-blackfin/segment.h b/include/asm-blackfin/segment.h new file mode 100644 index 0000000000..9e6d817fc7 --- /dev/null +++ b/include/asm-blackfin/segment.h @@ -0,0 +1,46 @@ +/* + * U-boot - segment.h + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _BLACKFIN_SEGMENT_H +#define _BLACKFIN_SEGMENT_H + +/* define constants */ +typedef unsigned long mm_segment_t; /* domain register */ + +#define KERNEL_CS 0x0 +#define KERNEL_DS 0x0 +#define __KERNEL_CS 0x0 +#define __KERNEL_DS 0x0 + +#define USER_CS 0x1 +#define USER_DS 0x1 +#define __USER_CS 0x1 +#define __USER_DS 0x1 + +#define get_ds() (KERNEL_DS) +#define get_fs() (__USER_DS) +#define segment_eq(a,b) ((a) == (b)) +#define set_fs(val) + +#endif diff --git a/include/asm-blackfin/setup.h b/include/asm-blackfin/setup.h new file mode 100644 index 0000000000..6ce96880ac --- /dev/null +++ b/include/asm-blackfin/setup.h @@ -0,0 +1,86 @@ +/* + * U-boot - setup.h + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * This file is based on + * asm/setup.h -- Definition of the Linux/Blackfin setup information + * Copyright Lineo, Inc 2001 Tony Kou + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _BLACKFIN_SETUP_H +#define _BLACKFIN_SETUP_H + +#include + +/* + * Linux/Blackfin Architectures + */ + +#define MACH_BFIN 1 + +#ifdef __KERNEL__ + +#ifndef __ASSEMBLY__ +extern unsigned long blackfin_machtype; +#endif + +#if defined(CONFIG_BFIN) +#define MACH_IS_BFIN (blackfin_machtype == MACH_BFIN) +#endif + +#ifndef MACH_TYPE +#define MACH_TYPE (blackfin_machtype) +#endif + +#endif + +/* + * CPU, FPU and MMU types + * + * Note: we don't need now: + * + */ + +#ifndef __ASSEMBLY__ +extern unsigned long blackfin_cputype; +#ifdef CONFIG_VME +extern unsigned long vme_brdtype; +#endif + +/* + * Miscellaneous + */ + +#define NUM_MEMINFO 4 +#define CL_SIZE 256 + +extern int blackfin_num_memory; /* # of memory blocks found (and used) */ +extern int blackfin_realnum_memory; /* real # of memory blocks found */ +extern struct mem_info blackfin_memory[NUM_MEMINFO]; /* memory description */ + +struct mem_info { + unsigned long addr; /* physical address of memory chunk */ + unsigned long size; /* length of memory chunk (in bytes) */ +}; +#endif + +#endif diff --git a/include/asm-blackfin/shared_resources.h b/include/asm-blackfin/shared_resources.h new file mode 100644 index 0000000000..fbef18618c --- /dev/null +++ b/include/asm-blackfin/shared_resources.h @@ -0,0 +1,33 @@ +/* + * U-boot - setup.h + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _SHARED_RESOURCES_H_ +#define _SHARED_RESOURCES_H_ + +void swap_to(int device_id); + +#define FLASH 0 +#define ETHERNET 1 + +#endif /* _SHARED_RESOURCES_H_ */ diff --git a/include/asm-blackfin/string.h b/include/asm-blackfin/string.h new file mode 100644 index 0000000000..ffd81d61a8 --- /dev/null +++ b/include/asm-blackfin/string.h @@ -0,0 +1,79 @@ +/* + * U-boot - string.h String functions + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* Changed by Lineo Inc. May 2001 */ + +#ifndef _BLACKFINNOMMU_STRING_H_ +#define _BLACKFINNOMMU_STRING_H_ + +#ifdef __KERNEL__ /* only set these up for kernel code */ + +#include +#include +#include + +#define __HAVE_ARCH_STRCPY +#define __HAVE_ARCH_STRNCPY +#define __HAVE_ARCH_STRCMP +#define __HAVE_ARCH_STRNCMP +#define __HAVE_ARCH_MEMCPY + +extern char *strcpy(char *dest, const char *src); +extern char *strncpy(char *dest, const char *src, size_t n); +extern int strcmp(const char *cs, const char *ct); +extern int strncmp(const char *cs, const char *ct, size_t count); +extern void * memcpy(void * dest,const void *src,size_t count); +extern void *memset(void *s, int c, size_t count); +extern int memcmp(const void *, const void *, __kernel_size_t); + +#else /* KERNEL */ + +/* + * let user libraries deal with these, + * IMHO the kernel has no place defining these functions for user apps + */ + +#define __HAVE_ARCH_STRCPY 1 +#define __HAVE_ARCH_STRNCPY 1 +#define __HAVE_ARCH_STRCAT 1 +#define __HAVE_ARCH_STRNCAT 1 +#define __HAVE_ARCH_STRCMP 1 +#define __HAVE_ARCH_STRNCMP 1 +#define __HAVE_ARCH_STRNICMP 1 +#define __HAVE_ARCH_STRCHR 1 +#define __HAVE_ARCH_STRRCHR 1 +#define __HAVE_ARCH_STRSTR 1 +#define __HAVE_ARCH_STRLEN 1 +#define __HAVE_ARCH_STRNLEN 1 +#define __HAVE_ARCH_MEMSET 1 +#define __HAVE_ARCH_MEMCPY 1 +#define __HAVE_ARCH_MEMMOVE 1 +#define __HAVE_ARCH_MEMSCAN 1 +#define __HAVE_ARCH_MEMCMP 1 +#define __HAVE_ARCH_MEMCHR 1 +#define __HAVE_ARCH_STRTOK 1 + +#endif /* KERNEL */ + +#endif /* _BLACKFIN_STRING_H_ */ diff --git a/include/asm-blackfin/system.h b/include/asm-blackfin/system.h new file mode 100644 index 0000000000..0e53adfe0f --- /dev/null +++ b/include/asm-blackfin/system.h @@ -0,0 +1,182 @@ +/* + * U-boot - system.h + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _BLACKFIN_SYSTEM_H +#define _BLACKFIN_SYSTEM_H + +#include /* get configuration macros */ +#include +#include +#include +#include + +#define prepare_to_switch() do { } while(0) + +/* + * switch_to(n) should switch tasks to task ptr, first checking that + * ptr isn't the current task, in which case it does nothing. This + * also clears the TS-flag if the task we switched to has used the + * math co-processor latest. + * + * 05/25/01 - Tony Kou (tonyko@lineo.ca) + * + * Adapted for BlackFin (ADI) by Ted Ma, Metrowerks, and Motorola GSG + * Copyright (c) 2002 Arcturus Networks Inc. (www.arcturusnetworks.com) + * Copyright (c) 2003 Metrowerks (www.metrowerks.com) + */ + +asmlinkage void resume(void); + +#define switch_to(prev,next,last) { \ + void *_last; \ + __asm__ __volatile__( \ + "r0 = %1;\n\t" \ + "r1 = %2;\n\t" \ + "call resume;\n\t" \ + "%0 = r0;\n\t" \ + : "=d" (_last) \ + : "d" (prev), \ + "d" (next) \ + : "CC", "R0", "R1", "R2", "R3", "R4", "R5", "P0", "P1");\ + (last) = _last; \ +} + +/* Force kerenl switch to user mode -- Steven Chen */ +#define switch_to_user_mode() { \ + __asm__ __volatile__( \ + "call kernel_to_user_mode;\n\t" \ + :: \ + : "CC", "R0", "R1", "R2", "R3", "R4", "R5", "P0", "P1");\ +} + +/* + * Interrupt configuring macros. + */ + +extern int irq_flags; + +#define __sti() { \ + __asm__ __volatile__ ( \ + "r3 = %0;" \ + "sti r3;" \ + ::"m"(irq_flags):"R3"); \ +} + +#define __cli() { \ + __asm__ __volatile__ ( \ + "cli r3;" \ + :::"R3"); \ +} + +#define __save_flags(x) { \ + __asm__ __volatile__ ( \ + "cli r3;" \ + "%0 = r3;" \ + "sti r3;" \ + ::"m"(x):"R3"); \ +} + +#define __save_and_cli(x) { \ + __asm__ __volatile__ ( \ + "cli r3;" \ + "%0 = r3;" \ + ::"m"(x):"R3"); \ +} + +#define __restore_flags(x) { \ + __asm__ __volatile__ ( \ + "r3 = %0;" \ + "sti r3;" \ + ::"m"(x):"R3"); \ +} + +/* For spinlocks etc */ +#define local_irq_save(x) __save_and_cli(x) +#define local_irq_restore(x) __restore_flags(x) +#define local_irq_disable() __cli() +#define local_irq_enable() __sti() + +#define cli() __cli() +#define sti() __sti() +#define save_flags(x) __save_flags(x) +#define restore_flags(x) __restore_flags(x) +#define save_and_cli(x) __save_and_cli(x) + +/* + * Force strict CPU ordering. + */ +#define nop() asm volatile ("nop;\n\t"::) +#define mb() asm volatile ("" : : :"memory") +#define rmb() asm volatile ("" : : :"memory") +#define wmb() asm volatile ("" : : :"memory") +#define set_rmb(var, value) do { xchg(&var, value); } while (0) +#define set_mb(var, value) set_rmb(var, value) +#define set_wmb(var, value) do { var = value; wmb(); } while (0) + +#ifdef CONFIG_SMP +#define smp_mb() mb() +#define smp_rmb() rmb() +#define smp_wmb() wmb() +#else +#define smp_mb() barrier() +#define smp_rmb() barrier() +#define smp_wmb() barrier() +#endif + +#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr)))) +#define tas(ptr) (xchg((ptr),1)) + +struct __xchg_dummy { + unsigned long a[100]; +}; +#define __xg(x) ((volatile struct __xchg_dummy *)(x)) + +static inline unsigned long __xchg(unsigned long x, volatile void *ptr, + int size) +{ + unsigned long tmp; + unsigned long flags = 0; + + save_and_cli(flags); + + switch (size) { + case 1: + __asm__ __volatile__("%0 = %2;\n\t" "%2 = %1;\n\t": "=&d"(tmp): "d"(x), "m"(*__xg(ptr)):"memory"); + break; + case 2: + __asm__ __volatile__("%0 = %2;\n\t" "%2 = %1;\n\t": "=&d"(tmp): "d"(x), "m"(*__xg(ptr)):"memory"); + break; + case 4: + __asm__ __volatile__("%0 = %2;\n\t" "%2 = %1;\n\t": "=&d"(tmp): "d"(x), "m"(*__xg(ptr)):"memory"); + break; + } + restore_flags(flags); + return tmp; +} + +/* Depend on whether Blackfin has hard reset function */ +/* YES it does, but it is tricky to implement - FIXME later ...MaTed--- */ +#define HARD_RESET_NOW() ({}) + +#endif /* _BLACKFIN_SYSTEM_H */ diff --git a/include/asm-blackfin/traps.h b/include/asm-blackfin/traps.h new file mode 100644 index 0000000000..29e6eba6fa --- /dev/null +++ b/include/asm-blackfin/traps.h @@ -0,0 +1,86 @@ +/* + * U-boot - traps.h + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * This file is based on + * linux/include/asm/traps.h + * Copyright (C) 1993 Hamish Macdonald + * Lineo, Inc Jul 2001 Tony Kou + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + */ + +#ifndef _BLACKFIN_TRAPS_H +#define _BLACKFIN_TRAPS_H + +#ifndef __ASSEMBLY__ +typedef void (*e_vector) (void); +extern e_vector vectors[]; +#endif + +#define VEC_SYS (0) +#define VEC_EXCPT01 (1) +#define VEC_EXCPT02 (2) +#define VEC_EXCPT03 (3) +#define VEC_EXCPT04 (4) +#define VEC_EXCPT05 (5) +#define VEC_EXCPT06 (6) +#define VEC_EXCPT07 (7) +#define VEC_EXCPT08 (8) +#define VEC_EXCPT09 (9) +#define VEC_EXCPT10 (10) +#define VEC_EXCPT11 (11) +#define VEC_EXCPT12 (12) +#define VEC_EXCPT13 (13) +#define VEC_EXCPT14 (14) +#define VEC_EXCPT15 (15) +#define VEC_STEP (16) +#define VEC_OVFLOW (17) +#define VEC_UNDEF_I (33) +#define VEC_ILGAL_I (34) +#define VEC_CPLB_VL (35) +#define VEC_MISALI_D (36) +#define VEC_UNCOV (37) +#define VEC_CPLB_M (38) +#define VEC_CPLB_MHIT (39) +#define VEC_WATCH (40) +#define VEC_ISTRU_VL (41) +#define VEC_MISALI_I (42) +#define VEC_CPLB_I_VL (43) +#define VEC_CPLB_I_M (44) +#define VEC_CPLB_I_MHIT (45) +#define VEC_ILL_RES (46) /* including unvalid supervisor mode insn */ + +#define VECOFF(vec) ((vec)<<2) + +#ifndef __ASSEMBLY__ + +/* Status register bits */ +#define PS_T (0x8000) +#define PS_S (0x0c00) /* Supervisor mode = 0b01 */ +#define PS_D (0x0c00) /* Debug mode = 0b1x */ +#define PS_M (0x1000) +#define PS_C (0x0001) + +#endif +#endif diff --git a/include/asm-blackfin/types.h b/include/asm-blackfin/types.h new file mode 100644 index 0000000000..942ed275af --- /dev/null +++ b/include/asm-blackfin/types.h @@ -0,0 +1,83 @@ +/* + * U-boot - types.h + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _BLACKFIN_TYPES_H +#define _BLACKFIN_TYPES_H + +/* + * This file is never included by application software unless + * explicitly requested (e.g., via linux/types.h) in which case the + * application is Linux specific so (user-) name space pollution is + * not a major issue. However, for interoperability, libraries still + * need to be careful to avoid a name clashes. + */ + +typedef unsigned short umode_t; + +/* + * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the + * header files exported to user space + */ + +typedef __signed__ char __s8; +typedef unsigned char __u8; + +typedef __signed__ short __s16; +typedef unsigned short __u16; + +typedef __signed__ int __s32; +typedef unsigned int __u32; + +/* HK0617 -- Changes to unsigned long temporarily */ +#if defined(__GNUC__) && !defined(__STRICT_ANSI__) +typedef __signed__ long long __s64; +typedef unsigned long long __u64; +#endif + +/* + * These aren't exported outside the kernel to avoid name space clashes + */ +#ifdef __KERNEL__ + +typedef signed char s8; +typedef unsigned char u8; + +typedef signed short s16; +typedef unsigned short u16; + +typedef signed int s32; +typedef unsigned int u32; + +typedef signed long long s64; +typedef unsigned long long u64; + +#define BITS_PER_LONG 32 + +/* Dma addresses are 32-bits wide. */ + +typedef u32 dma_addr_t; + +#endif + +#endif diff --git a/include/asm-blackfin/u-boot.h b/include/asm-blackfin/u-boot.h new file mode 100644 index 0000000000..ec39338039 --- /dev/null +++ b/include/asm-blackfin/u-boot.h @@ -0,0 +1,47 @@ +/* + * U-boot - u-boot.h Structure declarations for board specific data + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _U_BOOT_H_ +#define _U_BOOT_H_ 1 + +typedef struct bd_info { + int bi_baudrate; /* serial console baudrate */ + unsigned long bi_ip_addr; /* IP Address */ + unsigned char bi_enetaddr[6]; /* Ethernet adress */ + unsigned long bi_arch_number; /* unique id for this board */ + unsigned long bi_boot_params; /* where this board expects params */ + unsigned long bi_memstart; /* start of DRAM memory */ + unsigned long bi_memsize; /* size of DRAM memory in bytes */ + unsigned long bi_flashstart; /* start of FLASH memory */ + unsigned long bi_flashsize; /* size of FLASH memory */ + unsigned long bi_flashoffset; /* reserved area for startup monitor */ +} bd_t; + +#define bi_env_data bi_env->data +#define bi_env_crc bi_env->crc + +#endif /* _U_BOOT_H_ */ diff --git a/include/asm-blackfin/uaccess.h b/include/asm-blackfin/uaccess.h new file mode 100644 index 0000000000..84b4b4ead7 --- /dev/null +++ b/include/asm-blackfin/uaccess.h @@ -0,0 +1,207 @@ +/* + * U-boot - uaccess.h + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * This file is based on + * Based on: include/asm-m68knommu/uaccess.h + * Changes made by Lineo Inc. May 2001 + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __BLACKFIN_UACCESS_H +#define __BLACKFIN_UACCESS_H + +/* + * User space memory access functions + */ +#include +#include + +#define VERIFY_READ 0 +#define VERIFY_WRITE 1 + +/* We let the MMU do all checking */ +static inline int access_ok(int type, const void *addr, unsigned long size) +{ + return ((unsigned long) addr < 0x10f00000); /* need final decision - Tony */ +} + +static inline int verify_area(int type, const void *addr, + unsigned long size) +{ + return access_ok(type, addr, size) ? 0 : -EFAULT; +} + +/* + * The exception table consists of pairs of addresses: the first is the + * address of an instruction that is allowed to fault, and the second is + * the address at which the program should continue. No registers are + * modified, so it is entirely up to the continuation code to figure out + * what to do. + * + * All the routines below use bits of fixup code that are out of line + * with the main instruction path. This means when everything is well, + * we don't even have to jump over them. Further, they do not intrude + * on our cache or tlb entries. + */ + +struct exception_table_entry { + unsigned long insn, fixup; +}; + +/* Returns 0 if exception not found and fixup otherwise. */ +extern unsigned long search_exception_table(unsigned long); + +/* + * These are the main single-value transfer routines. They automatically + * use the right size if we just have the right pointer type. + */ + +#define put_user(x, ptr) \ +({ \ + int __pu_err = 0; \ + typeof(*(ptr)) __pu_val = (x); \ + switch (sizeof (*(ptr))) { \ + case 1: \ + __put_user_asm(__pu_err, __pu_val, ptr, B); \ + break; \ + case 2: \ + __put_user_asm(__pu_err, __pu_val, ptr, W); \ + break; \ + case 4: \ + __put_user_asm(__pu_err, __pu_val, ptr, ); \ + break; \ + default: \ + __pu_err = __put_user_bad(); \ + break; \ + } \ + __pu_err; \ +}) +/* + * [pregs] = dregs ==> 32bits + * H[pregs] = dregs ==> 16bits + * B[pregs] = dregs ==> 8 bits + */ + +#define __put_user(x, ptr) put_user(x, ptr) + +static inline int bad_user_access_length(void) +{ + panic("bad_user_access_length"); + return -1; +} + +#define __put_user_bad() (bad_user_access_length(), (-EFAULT)) + +/* + * Tell gcc we read from memory instead of writing: this is because + * we do not write to any memory gcc knows about, so there are no + * aliasing issues. + */ + +#define __ptr(x) ((unsigned long *)(x)) + +#define __put_user_asm(err,x,ptr,bhw) \ + __asm__ (#bhw"[%1] = %0;\n\t" \ + : /* no outputs */ \ + :"d" (x),"a" (__ptr(ptr)) : "memory") + +#define get_user(x, ptr) \ +({ \ + int __gu_err = 0; \ + typeof(*(ptr)) __gu_val = 0; \ + switch (sizeof(*(ptr))) { \ + case 1: \ + __get_user_asm(__gu_err, __gu_val, ptr, B, "=d",(Z)); \ + break; \ + case 2: \ + __get_user_asm(__gu_err, __gu_val, ptr, W, "=r",(Z)); \ + break; \ + case 4: \ + __get_user_asm(__gu_err, __gu_val, ptr, , "=r",); \ + break; \ + default: \ + __gu_val = 0; \ + __gu_err = __get_user_bad(); \ + break; \ + } \ + (x) = __gu_val; \ + __gu_err; \ +}) + +/* dregs = [pregs] ==> 32bits + * H[pregs] ==> 16bits + * B[pregs] ==> 8 bits + */ + +#define __get_user(x, ptr) get_user(x, ptr) +#define __get_user_bad() (bad_user_access_length(), (-EFAULT)) + +#define __get_user_asm(err,x,ptr,bhw,reg,option) \ + __asm__ ("%0 =" #bhw "[%1]"#option";\n\t" \ + : "=d" (x) \ + : "a" (__ptr(ptr))) + +#define copy_from_user(to, from, n) (memcpy(to, from, n), 0) +#define copy_to_user(to, from, n) (memcpy(to, from, n), 0) + +#define __copy_from_user(to, from, n) copy_from_user(to, from, n) +#define __copy_to_user(to, from, n) copy_to_user(to, from, n) + +#define copy_to_user_ret(to,from,n,retval) ({ if (copy_to_user(to,from,n)) return retval; }) +#define copy_from_user_ret(to,from,n,retval) ({ if (copy_from_user(to,from,n)) return retval; }) + +/* + * Copy a null terminated string from userspace. + */ + +static inline long strncpy_from_user(char *dst, const char *src, + long count) +{ + char *tmp; + strncpy(dst, src, count); + for (tmp = dst; *tmp && count > 0; tmp++, count--); + return (tmp - dst); /* DAVIDM should we count a NUL ? check getname */ +} + +/* + * Return the size of a string (including the ending 0) + * + * Return 0 on exception, a value greater than N if too long + */ +static inline long strnlen_user(const char *src, long n) +{ + return (strlen(src) + 1); /* DAVIDM make safer */ +} + +#define strlen_user(str) strnlen_user(str, 32767) + +/* + * Zero Userspace + */ + +static inline unsigned long clear_user(void *to, unsigned long n) +{ + memset(to, 0, n); + return (0); +} + +#endif diff --git a/include/asm-blackfin/virtconvert.h b/include/asm-blackfin/virtconvert.h new file mode 100644 index 0000000000..769f5a089c --- /dev/null +++ b/include/asm-blackfin/virtconvert.h @@ -0,0 +1,47 @@ +/* + * U-boot - virtconvert.h + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __BLACKFIN_VIRT_CONVERT__ +#define __BLACKFIN_VIRT_CONVERT__ + +/* + * Macros used for converting between virtual and physical mappings. + */ + +#ifdef __KERNEL__ + +#include +#include +#include + +#define mm_vtop(vaddr) ((unsigned long) vaddr) +#define mm_ptov(vaddr) ((unsigned long) vaddr) +#define phys_to_virt(vaddr) ((unsigned long) vaddr) +#define virt_to_phys(vaddr) ((unsigned long) vaddr) + +#define virt_to_bus virt_to_phys +#define bus_to_virt phys_to_virt + +#endif +#endif diff --git a/include/configs/ezkit533.h b/include/configs/ezkit533.h new file mode 100644 index 0000000000..a52af4eebe --- /dev/null +++ b/include/configs/ezkit533.h @@ -0,0 +1,188 @@ +#ifndef __CONFIG_EZKIT533_H__ +#define __CONFIG_EZKIT533_H__ + +#define CFG_LONGHELP 1 +#define CONFIG_BAUDRATE 57600 +#define CONFIG_STAMP 1 +#define CONFIG_BOOTDELAY 5 + +#define CONFIG_DRIVER_SMC91111 1 +#define CONFIG_SMC91111_BASE 0x20310300 +#if 0 +#define CONFIG_MII +#define CFG_DISCOVER_PHY +#endif + +#define CONFIG_RTC_BF533 1 +#define CONFIG_BOOT_RETRY_TIME -1 /* Enable this if bootretry required, currently its disabled */ + +/* CONFIG_CLKIN_HZ is any value in Hz */ +#define CONFIG_CLKIN_HZ 27000000 +/* CONFIG_CLKIN_HALF controls what is passed to PLL 0=CLKIN */ +/* 1=CLKIN/2 */ +#define CONFIG_CLKIN_HALF 0 +/* CONFIG_PLL_BYPASS controls if the PLL is used 0=don't bypass */ +/* 1=bypass PLL */ +#define CONFIG_PLL_BYPASS 0 +/* CONFIG_VCO_MULT controls what the multiplier of the PLL is. */ +/* Values can range from 1-64 */ +#define CONFIG_VCO_MULT 22 +/* CONFIG_CCLK_DIV controls what the core clock divider is */ +/* Values can be 1, 2, 4, or 8 ONLY */ +#define CONFIG_CCLK_DIV 1 +/* CONFIG_SCLK_DIV controls what the peripheral clock divider is */ +/* Values can range from 1-15 */ +#define CONFIG_SCLK_DIV 5 + +#if ( CONFIG_CLKIN_HALF == 0 ) +#define CONFIG_VCO_HZ ( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT ) +#else +#define CONFIG_VCO_HZ (( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT ) / 2 ) +#endif + +#if (CONFIG_PLL_BYPASS == 0) +#define CONFIG_CCLK_HZ ( CONFIG_VCO_HZ / CONFIG_CCLK_DIV ) +#define CONFIG_SCLK_HZ ( CONFIG_VCO_HZ / CONFIG_SCLK_DIV ) +#else +#define CONFIG_CCLK_HZ CONFIG_CLKIN_HZ +#define CONFIG_SCLK_HZ CONFIG_CLKIN_HZ +#endif + +#define CONFIG_MEM_SIZE 32 /* 128, 64, 32, 16 */ +#define CONFIG_MEM_ADD_WDTH 9 /* 8, 9, 10, 11 */ +#define CONFIG_MEM_MT48LC16M16A2TG_75 1 + +#define CONFIG_LOADS_ECHO 1 + + +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ + CFG_CMD_PING | \ + CFG_CMD_ELF | \ + CFG_CMD_I2C | \ + CFG_CMD_JFFS2 | \ + CFG_CMD_DATE) +#define CONFIG_BOOTARGS "root=/dev/mtdblock0 ip=192.168.0.15:192.168.0.2:192.168.0.1:255.255.255.0:ezkit:eth0:off" + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include + +#define CFG_PROMPT "ezkit> " /* Monitor Command Prompt */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_MEMTEST_START 0x00100000 /* memtest works on */ +#define CFG_MEMTEST_END 0x01F00000 /* 1 ... 31 MB in DRAM */ +#define CFG_LOAD_ADDR 0x01000000 /* default load address */ +#define CFG_HZ 1000 /* decrementer freq: 10 ms ticks */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_MAX_RAM_SIZE 0x02000000 +#define CFG_FLASH_BASE 0x20000000 + +#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +#define CFG_MONITOR_BASE (CFG_MAX_RAM_SIZE - CFG_MONITOR_LEN) +#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ +#define CFG_MALLOC_BASE (CFG_MONITOR_BASE - CFG_MALLOC_LEN) +#define CFG_GBL_DATA_SIZE 0x4000 +#define CFG_GBL_DATA_ADDR (CFG_MALLOC_BASE - CFG_GBL_DATA_SIZE) +#define CONFIG_STACKBASE (CFG_GBL_DATA_ADDR - 4) + +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ +#define CFG_FLASH0_BASE 0x20000000 +#define CFG_FLASH1_BASE 0x20200000 +#define CFG_FLASH2_BASE 0x20280000 +#define CFG_MAX_FLASH_BANKS 3 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 40 /* max number of sectors on one chip */ + +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_ADDR 0x20020000 +#define CFG_ENV_SECT_SIZE 0x10000 /* Total Size of Environment Sector */ + +/* JFFS Partition offset set */ +#define CFG_JFFS2_FIRST_BANK 0 +#define CFG_JFFS2_NUM_BANKS 1 +/* 512k reserved for u-boot */ +#define CFG_JFFS2_FIRST_SECTOR 11 + + +/* + * Stack sizes + */ +#define CONFIG_STACKSIZE (128*1024) /* regular stack */ + +#define POLL_MODE 1 +#define FLASH_TOT_SECT 40 +#define FLASH_SIZE 0x220000 +#define CFG_FLASH_SIZE 0x220000 + +/* + * Initialize PSD4256 registers for using I2C + */ +#define CONFIG_MISC_INIT_R + +/* + * I2C settings + * By default PF1 is used as SDA and PF0 as SCL on the Stamp board + */ +#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */ +/* + * Software (bit-bang) I2C driver configuration + */ +#define PF_SCL PF0 +#define PF_SDA PF1 + +#define I2C_INIT (*pFIO_DIR |= PF_SCL); asm("ssync;") +#define I2C_ACTIVE (*pFIO_DIR |= PF_SDA); *pFIO_INEN &= ~PF_SDA; asm("ssync;") +#define I2C_TRISTATE (*pFIO_DIR &= ~PF_SDA); *pFIO_INEN |= PF_SDA; asm("ssync;") +#define I2C_READ ((volatile)(*pFIO_FLAG_D & PF_SDA) != 0); asm("ssync;") +#define I2C_SDA(bit) if(bit) { \ + *pFIO_FLAG_S = PF_SDA; \ + asm("ssync;"); \ + } \ + else { \ + *pFIO_FLAG_C = PF_SDA; \ + asm("ssync;"); \ + } +#define I2C_SCL(bit) if(bit) { \ + *pFIO_FLAG_S = PF_SCL; \ + asm("ssync;"); \ + } \ + else { \ + *pFIO_FLAG_C = PF_SCL; \ + asm("ssync;"); \ + } +#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */ + +#define CFG_I2C_SPEED 50000 +#define CFG_I2C_SLAVE 0xFE + + +#define __ADSPLPBLACKFIN__ 1 +#define __ADSPBF533__ 1 + +/* 0xFF, 0x7BB07BB0, 0x22547BB0 */ +/* #define AMGCTLVAL (AMBEN_P0 | AMBEN_P1 | AMBEN_P2 | AMCKEN) +#define AMBCTL0VAL (B1WAT_7 | B1RAT_11 | B1HT_2 | B1ST_3 | B1TT_4 | ~B1RDYPOL | \ + ~B1RDYEN | B0WAT_7 | B0RAT_11 | B0HT_2 | B0ST_3 | B0TT_4 | ~B0RDYPOL | ~B0RDYEN) +#define AMBCTL1VAL (B3WAT_2 | B3RAT_2 | B3HT_1 | B3ST_1 | B3TT_4 | B3RDYPOL | ~B3RDYEN | \ + B2WAT_7 | B2RAT_11 | B2HT_2 | B2ST_3 | B2TT_4 | ~B2RDYPOL | ~B2RDYEN) +*/ +#define AMGCTLVAL 0xFF +#define AMBCTL0VAL 0x7BB07BB0 +#define AMBCTL1VAL 0xFFC27BB0 + +#define CONFIG_VDSP 1 + +#ifdef CONFIG_VDSP +#define ET_EXEC_VDSP 0x8 +#define SHT_STRTAB_VDSP 0x1 +#define ELFSHDRSIZE_VDSP 0x2C +#define VDSP_ENTRY_ADDR 0xFFA00000 +#endif + +#endif diff --git a/include/configs/stamp.h b/include/configs/stamp.h new file mode 100644 index 0000000000..1402a4131a --- /dev/null +++ b/include/configs/stamp.h @@ -0,0 +1,340 @@ +/* + * U-boot - stamp.h Configuration file for STAMP board + * having BF533 processor + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_STAMP_H__ +#define __CONFIG_STAMP_H__ + +/* + * Board settings + * + */ + +#define __ADSPLPBLACKFIN__ 1 +#define __ADSPBF533__ 1 +#define CONFIG_STAMP 1 +#define CONFIG_RTC_BF533 1 + +/* FLASH/ETHERNET uses the same address range */ +#define SHARED_RESOURCES 1 + +#define CONFIG_VDSP 1 + +/* + * Clock settings + * + */ + +/* CONFIG_CLKIN_HZ is any value in Hz */ +#define CONFIG_CLKIN_HZ 11059200 +/* CONFIG_CLKIN_HALF controls what is passed to PLL 0=CLKIN */ +/* 1=CLKIN/2 */ +#define CONFIG_CLKIN_HALF 0 +/* CONFIG_PLL_BYPASS controls if the PLL is used 0=don't bypass */ +/* 1=bypass PLL */ +#define CONFIG_PLL_BYPASS 0 +/* CONFIG_VCO_MULT controls what the multiplier of the PLL is. */ +/* Values can range from 1-64 */ +#define CONFIG_VCO_MULT 45 +/* CONFIG_CCLK_DIV controls what the core clock divider is */ +/* Values can be 1, 2, 4, or 8 ONLY */ +#define CONFIG_CCLK_DIV 1 +/* CONFIG_SCLK_DIV controls what the peripheral clock divider is */ +/* Values can range from 1-15 */ +#define CONFIG_SCLK_DIV 6 + +/* + * Network Settings + */ +/* network support */ +#define CONFIG_IPADDR 192.168.0.15 +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_GATEWAYIP 192.168.0.1 +#define CONFIG_SERVERIP 192.168.0.2 +#define CONFIG_HOSTNAME STAMP +#define CONFIG_ROOTPATH /checkout/uClinux-dist/romfs + +/* To remove hardcoding and enable MAC storage in EEPROM */ +/* #define CONFIG_ETHADDR 02:80:ad:20:31:b8 */ + +/* + * Command settings + * + */ + +#define CFG_LONGHELP 1 + +#define CONFIG_BOOTDELAY 5 +#define CONFIG_BOOT_RETRY_TIME -1 /* Enable this if bootretry required, currently its disabled */ +#define CONFIG_BOOTCOMMAND "run ramboot" +#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds\n" + +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ + CFG_CMD_PING | \ + CFG_CMD_ELF | \ + CFG_CMD_I2C | \ + CFG_CMD_CACHE | \ + CFG_CMD_JFFS2 | \ + CFG_CMD_DATE) +#define CONFIG_BOOTARGS "root=/dev/mtdblock0 rw" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "ramargs=setenv bootargs root=/dev/mtdblock0 rw\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$(serverip):$(rootpath)\0" \ + "addip=setenv bootargs $(bootargs) " \ + "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)" \ + ":$(hostname):eth0:off\0" \ + "ramboot=tftpboot 0x1000000 linux;" \ + "run ramargs;run addip;bootelf\0" \ + "nfsboot=tftpboot 0x1000000 linux;" \ + "run nfsargs;run addip;bootelf\0" \ + "flashboot=bootm 0x20100000\0" \ + "" + +/* This must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include + +/* + * Console settings + * + */ + +#define CONFIG_BAUDRATE 57600 +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +#define CFG_PROMPT "stamp>" /* Monitor Command Prompt */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CONFIG_LOADS_ECHO 1 + +/* + * Network settings + * + */ + +#define CONFIG_DRIVER_SMC91111 1 +#define CONFIG_SMC91111_BASE 0x20300300 +/* To remove hardcoding and enable MAC storage in EEPROM */ +/* #define HARDCODE_MAC 1 */ + +/* + * Flash settings + * + */ + +#define CFG_FLASH_CFI /* The flash is CFI compatible */ +#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */ +#define CFG_FLASH_CFI_AMD_RESET + +#define CFG_ENV_IS_IN_FLASH 1 + +#define CFG_FLASH_BASE 0x20000000 +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 67 /* max number of sectors on one chip */ + +#define CFG_ENV_ADDR 0x20020000 +#define CFG_ENV_SIZE 0x10000 +#define CFG_ENV_SECT_SIZE 0x10000 /* Total Size of Environment Sector */ + +#define CFG_FLASH_ERASE_TOUT 30000 /* Timeout for Chip Erase (in ms) */ +#define CFG_FLASH_ERASEBLOCK_TOUT 5000 /* Timeout for Block Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 1 /* Timeout for Flash Write (in ms) */ + +/* JFFS Partition offset set */ +#define CFG_JFFS2_FIRST_BANK 0 +#define CFG_JFFS2_NUM_BANKS 1 +/* 512k reserved for u-boot */ +#define CFG_JFFS2_FIRST_SECTOR 11 + +/* + * following timeouts shall be used once the + * Flash real protection is enabled + */ +#define CFG_FLASH_LOCK_TOUT 5 /* Timeout for Flash Set Lock Bit (in ms) */ +#define CFG_FLASH_UNLOCK_TOUT 10000 /* Timeout for Flash Clear Lock Bits (in ms) */ + +/* + * I2C settings + * By default PF2 is used as SDA and PF3 as SCL on the Stamp board + */ +#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */ +/* + * Software (bit-bang) I2C driver configuration + */ +#define PF_SCL PF3 +#define PF_SDA PF2 + +#define I2C_INIT (*pFIO_DIR |= PF_SCL); asm("ssync;") +#define I2C_ACTIVE (*pFIO_DIR |= PF_SDA); *pFIO_INEN &= ~PF_SDA; asm("ssync;") +#define I2C_TRISTATE (*pFIO_DIR &= ~PF_SDA); *pFIO_INEN |= PF_SDA; asm("ssync;") +#define I2C_READ ((volatile)(*pFIO_FLAG_D & PF_SDA) != 0); asm("ssync;") +#define I2C_SDA(bit) if(bit) { \ + *pFIO_FLAG_S = PF_SDA; \ + asm("ssync;"); \ + } \ + else { \ + *pFIO_FLAG_C = PF_SDA; \ + asm("ssync;"); \ + } +#define I2C_SCL(bit) if(bit) { \ + *pFIO_FLAG_S = PF_SCL; \ + asm("ssync;"); \ + } \ + else { \ + *pFIO_FLAG_C = PF_SCL; \ + asm("ssync;"); \ + } +#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */ + +#define CFG_I2C_SPEED 50000 +#define CFG_I2C_SLAVE 0xFE + +/* + * Compact Flash settings + */ + +/* Enabled below option for CF support */ +/* #define CONFIG_STAMP_CF 1 */ + +#if defined(CONFIG_STAMP_CF) && (CONFIG_COMMANDS & CFG_CMD_IDE) + +#define CONFIG_MISC_INIT_R 1 +#define CONFIG_DOS_PARTITION 1 + +/* + * IDE/ATA stuff + */ +#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */ +#undef CONFIG_IDE_LED /* no led for ide supported */ +#undef CONFIG_IDE_RESET /* no reset for ide supported */ + +#define CFG_IDE_MAXBUS 1 /* max. 1 IDE busses */ +#define CFG_IDE_MAXDEVICE (CFG_IDE_MAXBUS*1) /* max. 1 drives per IDE bus */ + +#define CFG_ATA_BASE_ADDR 0x20200000 +#define CFG_ATA_IDE0_OFFSET 0x0000 + +#define CFG_ATA_DATA_OFFSET 0x0020 /* Offset for data I/O */ +#define CFG_ATA_REG_OFFSET 0x0020 /* Offset for normal register accesses */ +#define CFG_ATA_ALT_OFFSET 0x0007 /* Offset for alternate registers */ + +#define CFG_ATA_STRIDE 2 +#endif + +/* + * SDRAM settings + * + */ + +#define CONFIG_MEM_SIZE 128 /* 128, 64, 32, 16 */ +#define CONFIG_MEM_ADD_WDTH 11 /* 8, 9, 10, 11 */ +#define CONFIG_MEM_MT48LC64M4A2FB_7E 1 + +#define CFG_MEMTEST_START 0x00100000 /* memtest works on */ +#define CFG_MEMTEST_END 0x07EFFFFF /* 1 ... 127 MB in DRAM */ +#define CFG_LOAD_ADDR 0x01000000 /* default load address */ + +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_MAX_RAM_SIZE 0x08000000 + +#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +#define CFG_MONITOR_BASE (CFG_MAX_RAM_SIZE - CFG_MONITOR_LEN) + + + + +#if ( CONFIG_CLKIN_HALF == 0 ) +#define CONFIG_VCO_HZ ( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT ) +#else +#define CONFIG_VCO_HZ (( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT ) / 2 ) +#endif + +#if (CONFIG_PLL_BYPASS == 0) +#define CONFIG_CCLK_HZ ( CONFIG_VCO_HZ / CONFIG_CCLK_DIV ) +#define CONFIG_SCLK_HZ ( CONFIG_VCO_HZ / CONFIG_SCLK_DIV ) +#else +#define CONFIG_CCLK_HZ CONFIG_CLKIN_HZ +#define CONFIG_SCLK_HZ CONFIG_CLKIN_HZ +#endif + + + +/* + * Miscellaneous configurable options + */ +#define CFG_HZ 1000 /* 1ms time tick */ + +#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ +#define CFG_MALLOC_BASE (CFG_MONITOR_BASE - CFG_MALLOC_LEN) +#define CFG_GBL_DATA_SIZE 0x4000 +#define CFG_GBL_DATA_ADDR (CFG_MALLOC_BASE - CFG_GBL_DATA_SIZE) +#define CONFIG_STACKBASE (CFG_GBL_DATA_ADDR - 4) + +#define CFG_LARGE_IMAGE_LEN 0x4000000 /* Large Image Length, set to 64 Meg */ + +#define CONFIG_SHOW_BOOT_PROGRESS 1 /* Show boot progress on LEDs */ + +/* + * Stack sizes + */ +#define CONFIG_STACKSIZE (128*1024) /* regular stack */ + + +/* + * FLASH organization and environment definitions + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/* 0xFF, 0xBBC3BBc3, 0x99B39983 */ +/*#define AMGCTLVAL (AMBEN_P0 | AMBEN_P1 | AMBEN_P2 | AMCKEN) +#define AMBCTL0VAL (B1WAT_11 | B1RAT_11 | B1HT_3 | B1ST_4 | B1TT_4 | B1RDYPOL | \ + B1RDYEN | B0WAT_11 | B0RAT_11 | B0HT_3 | B0ST_4 | B0TT_4 | B0RDYPOL | B0RDYEN) +#define AMBCTL1VAL (B3WAT_9 | B3RAT_9 | B3HT_2 | B3ST_3 | B3TT_4 | B3RDYPOL | \ + B3RDYEN | B2WAT_9 | B2RAT_9 | B2HT_2 | B2ST_4 | B2TT_4 | B2RDYPOL | B2RDYEN) +*/ +#define AMGCTLVAL 0xFF +#define AMBCTL0VAL 0xBBC3BBC3 +#define AMBCTL1VAL 0x99B39983 +#define CF_AMBCTL1VAL 0x99B3ffc2 + +#ifdef CONFIG_VDSP +#define ET_EXEC_VDSP 0x8 +#define SHT_STRTAB_VDSP 0x1 +#define ELFSHDRSIZE_VDSP 0x2C +#define VDSP_ENTRY_ADDR 0xFFA00000 +#endif + + +#endif diff --git a/lib_blackfin/Makefile b/lib_blackfin/Makefile new file mode 100644 index 0000000000..bc280d01f8 --- /dev/null +++ b/lib_blackfin/Makefile @@ -0,0 +1,47 @@ +# +# U-boot Makefile +# +# Copyright (c) 2005 blackfin.uclinux.org +# +# (C) Copyright 2000-2004 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = lib$(ARCH).a + +AOBJS = + +COBJS = board.o bf533_linux.o bf533_string.o cache.o muldi3.o +OBJS = $(AOBJS) $(COBJS) + +$(LIB): .depend $(OBJS) + $(AR) crv $@ $(OBJS) + +######################################################################### + +.depend: Makefile $(AOBJS:.o=.S) $(COBJS:.o=.c) + $(CC) -M $(CFLAGS) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@ + +sinclude .depend + +######################################################################### diff --git a/lib_blackfin/bf533_linux.c b/lib_blackfin/bf533_linux.c new file mode 100644 index 0000000000..6f29795f9d --- /dev/null +++ b/lib_blackfin/bf533_linux.c @@ -0,0 +1,91 @@ +/* + * U-boot - bf533_linux.c + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* Dummy functions, currently not in Use */ + +#include +#include +#include +#include +#include + +#define LINUX_MAX_ENVS 256 +#define LINUX_MAX_ARGS 256 + +#ifdef CONFIG_SHOW_BOOT_PROGRESS +#include +#define SHOW_BOOT_PROGRESS(arg) show_boot_progress(arg) +#else +#define SHOW_BOOT_PROGRESS(arg) +#endif + +#define CMD_LINE_ADDR 0xFF900000 /* L1 scratchpad */ + +#ifdef SHARED_RESOURCES + extern void swap_to(int device_id); +#endif + +static char *make_command_line(void); + +extern image_header_t header; +extern int do_reset(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]); +void do_bootm_linux(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[], + ulong addr, ulong * len_ptr, int verify) +{ + int (*appl)(char *cmdline); + char *cmdline; + +#ifdef SHARED_RESOURCES + swap_to(FLASH); +#endif + + appl = (int (*)(char *))ntohl(header.ih_ep); + printf("Starting Kernel at = %x\n", appl); + cmdline = make_command_line(); + if(icache_status()){ + flush_instruction_cache(); + icache_disable(); + } + if(dcache_status()){ + flush_data_cache(); + dcache_disable(); + } + (*appl)(cmdline); +} + +char *make_command_line(void) +{ + char *dest = (char *) CMD_LINE_ADDR; + char *bootargs; + + if ( (bootargs = getenv("bootargs")) == NULL ) + return NULL; + + strncpy(dest, bootargs, 0x1000); + dest[0xfff] = 0; + return dest; +} diff --git a/lib_blackfin/bf533_string.c b/lib_blackfin/bf533_string.c new file mode 100644 index 0000000000..cfa515a848 --- /dev/null +++ b/lib_blackfin/bf533_string.c @@ -0,0 +1,185 @@ +/* + * U-boot - bf533_string.c Contains library routines. + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include + +void *dma_memcpy(void *,const void *,size_t); + +char *strcpy(char *dest, const char *src) +{ + char *xdest = dest; + char temp = 0; + + __asm__ __volatile__ + ("1:\t%2 = B [%1++] (Z);\n\t" + "B [%0++] = %2;\n\t" + "CC = %2;\n\t" + "if cc jump 1b (bp);\n":"=a"(dest), "=a"(src), "=d"(temp) + :"0"(dest), "1"(src), "2"(temp):"memory"); + + return xdest; +} + +char *strncpy(char *dest, const char *src, size_t n) +{ + char *xdest = dest; + char temp = 0; + + if (n == 0) + return xdest; + + __asm__ __volatile__ + ("1:\t%3 = B [%1++] (Z);\n\t" + "B [%0++] = %3;\n\t" + "CC = %3;\n\t" + "if ! cc jump 2f;\n\t" + "%2 += -1;\n\t" + "CC = %2 == 0;\n\t" + "if ! cc jump 1b (bp);\n" + "2:\n":"=a"(dest), "=a"(src), "=da"(n), "=d"(temp) + :"0"(dest), "1"(src), "2"(n), "3"(temp) + :"memory"); + + return xdest; +} + +int strcmp(const char *cs, const char *ct) +{ + char __res1, __res2; + + __asm__ + ("1:\t%2 = B[%0++] (Z);\n\t" /* get *cs */ + "%3 = B[%1++] (Z);\n\t" /* get *ct */ + "CC = %2 == %3;\n\t" /* compare a byte */ + "if ! cc jump 2f;\n\t" /* not equal, break out */ + "CC = %2;\n\t" /* at end of cs? */ + "if cc jump 1b (bp);\n\t" /* no, keep going */ + "jump.s 3f;\n" /* strings are equal */ + "2:\t%2 = %2 - %3;\n" /* *cs - *ct */ + "3:\n": "=a"(cs), "=a"(ct), "=d"(__res1), + "=d"(__res2) + : "0"(cs), "1"(ct)); + + return __res1; +} + +int strncmp(const char *cs, const char *ct, size_t count) +{ + char __res1, __res2; + + if (!count) + return 0; + + __asm__ + ("1:\t%3 = B[%0++] (Z);\n\t" /* get *cs */ + "%4 = B[%1++] (Z);\n\t" /* get *ct */ + "CC = %3 == %4;\n\t" /* compare a byte */ + "if ! cc jump 3f;\n\t" /* not equal, break out */ + "CC = %3;\n\t" /* at end of cs? */ + "if ! cc jump 4f;\n\t" /* yes, all done */ + "%2 += -1;\n\t" /* no, adjust count */ + "CC = %2 == 0;\n\t" "if ! cc jump 1b;\n" /* more to do, keep going */ + "2:\t%3 = 0;\n\t" /* strings are equal */ + "jump.s 4f;\n" "3:\t%3 = %3 - %4;\n" /* *cs - *ct */ + "4:": "=a"(cs), "=a"(ct), "=da"(count), "=d"(__res1), + "=d"(__res2) + : "0"(cs), "1"(ct), "2"(count)); + + return __res1; +} + +/* + * memcpy - Copy one area of memory to another + * @dest: Where to copy to + * @src: Where to copy from + * @count: The size of the area. + * + * You should not use this function to access IO space, use memcpy_toio() + * or memcpy_fromio() instead. + */ +void * memcpy(void * dest,const void *src,size_t count) +{ + char *tmp = (char *) dest, *s = (char *) src; + +/* Turn off the cache, if destination in the L1 memory */ + if ( (tmp >= (char *)L1_ISRAM) && (tmp < (char *)L1_ISRAM_END) + || (tmp >= (char *)DATA_BANKA_SRAM) && (tmp < DATA_BANKA_SRAM_END) + || (tmp >= (char *)DATA_BANKB_SRAM) && (tmp < DATA_BANKB_SRAM_END) ){ + if(icache_status()){ + blackfin_icache_flush_range(src, src+count); + icache_disable(); + } + if(dcache_status()){ + blackfin_dcache_flush_range(src, src+count); + dcache_disable(); + } + dma_memcpy(dest,src,count); + }else{ + while(count--) + *tmp++ = *s++; + } + return dest; +} + +void *dma_memcpy(void * dest,const void *src,size_t count) +{ + + *pMDMA_D0_IRQ_STATUS = DMA_DONE | DMA_ERR; + + /* Copy sram functions from sdram to sram */ + /* Setup destination start address */ + *pMDMA_D0_START_ADDR = (volatile void **)dest; + /* Setup destination xcount */ + *pMDMA_D0_X_COUNT = count ; + /* Setup destination xmodify */ + *pMDMA_D0_X_MODIFY = 1; + + /* Setup Source start address */ + *pMDMA_S0_START_ADDR = (volatile void **)src; + /* Setup Source xcount */ + *pMDMA_S0_X_COUNT = count; + /* Setup Source xmodify */ + *pMDMA_S0_X_MODIFY = 1; + + /* Enable source DMA */ + *pMDMA_S0_CONFIG = (DMAEN); + asm("ssync;"); + + *pMDMA_D0_CONFIG = ( WNR | DMAEN); + + while(*pMDMA_D0_IRQ_STATUS & DMA_RUN){ + *pMDMA_D0_IRQ_STATUS |= (DMA_DONE | DMA_ERR); + } + *pMDMA_D0_IRQ_STATUS |= (DMA_DONE | DMA_ERR); + + dest += count; + src += count; + return dest; +} diff --git a/lib_blackfin/blackfin_board.h b/lib_blackfin/blackfin_board.h new file mode 100644 index 0000000000..35a513fbac --- /dev/null +++ b/lib_blackfin/blackfin_board.h @@ -0,0 +1,62 @@ +/* + * U-boot - blackfin_board.h + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __BLACKFIN_BOARD_H__ +#define __BLACKFIN_BOARD_H__ + +extern void timer_init(void); +extern void init_IRQ(void); +extern void rtc_init(void); + +extern ulong uboot_end_data; +extern ulong uboot_end; + +ulong monitor_flash_len; + + +#define VERSION_STRING_SIZE 150 /* including 40 bytes buffer to change any string */ +#define VERSION_STRING_FORMAT "%s (%s - %s)\n" +#define VERSION_STRING U_BOOT_VERSION, __DATE__, __TIME__ + +char version_string[VERSION_STRING_SIZE]; + +int *g_addr; +static ulong mem_malloc_start; +static ulong mem_malloc_end; +static ulong mem_malloc_brk; +extern char _sram_in_sdram_start[]; +extern char _sram_inst_size[]; +#ifdef DEBUG +static void display_global_data(void); +#endif + +/* definitions used to check the SMC card availability */ +#define SMC_BASE_ADDRESS CONFIG_SMC91111_BASE +#define UPPER_BYTE_MASK 0xFF00 +#define SMC_IDENT 0x3300 + +#endif diff --git a/lib_blackfin/board.c b/lib_blackfin/board.c new file mode 100644 index 0000000000..7bf63eb0af --- /dev/null +++ b/lib_blackfin/board.c @@ -0,0 +1,282 @@ +/* + * U-boot - board.c First C file to be called contains init routines + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include "blackfin_board.h" +#include "../drivers/smc91111.h" + +extern flash_info_t flash_info[]; + + +static void mem_malloc_init(void) +{ + mem_malloc_start = CFG_MALLOC_BASE; + mem_malloc_end = (CFG_MALLOC_BASE + CFG_MALLOC_LEN); + mem_malloc_brk = mem_malloc_start; + memset((void *) mem_malloc_start, 0, + mem_malloc_end - mem_malloc_start); +} + +void *sbrk(ptrdiff_t increment) +{ + ulong old = mem_malloc_brk; + ulong new = old + increment; + + if ((new < mem_malloc_start) || (new > mem_malloc_end)) { + return (NULL); + } + mem_malloc_brk = new; + + return ((void *) old); +} + +static int display_banner(void) +{ + sprintf(version_string, VERSION_STRING_FORMAT, VERSION_STRING); + printf("%s\n", version_string); + return (0); +} + +static void display_flash_config(ulong size) +{ + puts("FLASH: "); + print_size(size, "\n"); + return; +} + +static int init_baudrate(void) +{ + DECLARE_GLOBAL_DATA_PTR; + + uchar tmp[64]; + int i = getenv_r("baudrate", tmp, sizeof(tmp)); + gd->bd->bi_baudrate = gd->baudrate = (i > 0) + ? (int) simple_strtoul(tmp, NULL, 10) + : CONFIG_BAUDRATE; + return (0); +} + +#ifdef DEBUG +static void display_global_data(void) +{ + DECLARE_GLOBAL_DATA_PTR; + bd_t *bd; + bd = gd->bd; + printf("--flags:%x\n", gd->flags); + printf("--board_type:%x\n", gd->board_type); + printf("--baudrate:%x\n", gd->baudrate); + printf("--have_console:%x\n", gd->have_console); + printf("--ram_size:%x\n", gd->ram_size); + printf("--reloc_off:%x\n", gd->reloc_off); + printf("--env_addr:%x\n", gd->env_addr); + printf("--env_valid:%x\n", gd->env_valid); + printf("--bd:%x %x\n", gd->bd, bd); + printf("---bi_baudrate:%x\n", bd->bi_baudrate); + printf("---bi_ip_addr:%x\n", bd->bi_ip_addr); + printf("---bi_enetaddr:%x %x %x %x %x %x\n", + bd->bi_enetaddr[0], + bd->bi_enetaddr[1], + bd->bi_enetaddr[2], + bd->bi_enetaddr[3], + bd->bi_enetaddr[4], + bd->bi_enetaddr[5]); + printf("---bi_arch_number:%x\n", bd->bi_arch_number); + printf("---bi_boot_params:%x\n", bd->bi_boot_params); + printf("---bi_memstart:%x\n", bd->bi_memstart); + printf("---bi_memsize:%x\n", bd->bi_memsize); + printf("---bi_flashstart:%x\n", bd->bi_flashstart); + printf("---bi_flashsize:%x\n", bd->bi_flashsize); + printf("---bi_flashoffset:%x\n", bd->bi_flashoffset); + printf("--jt:%x *:%x\n", gd->jt, *(gd->jt)); +} +#endif + +/* + * All attempts to come up with a "common" initialization sequence + * that works for all boards and architectures failed: some of the + * requirements are just _too_ different. To get rid of the resulting + * mess of board dependend #ifdef'ed code we now make the whole + * initialization sequence configurable to the user. + * + * The requirements for any new initalization function is simple: it + * receives a pointer to the "global data" structure as it's only + * argument, and returns an integer return code, where 0 means + * "continue" and != 0 means "fatal error, hang the system". + */ + +void board_init_f(ulong bootflag) +{ + DECLARE_GLOBAL_DATA_PTR; + ulong addr; + bd_t *bd; + + gd = (gd_t *) (CFG_GBL_DATA_ADDR); + memset((void *) gd, 0, sizeof(gd_t)); + + /* Board data initialization */ + addr = (CFG_GBL_DATA_ADDR + sizeof(gd_t)); + + /* Align to 4 byte boundary */ + addr &= ~(4 - 1); + bd = (bd_t*)addr; + gd->bd = bd; + memset((void *) bd, 0, sizeof(bd_t)); + + /* Initialize */ + init_IRQ(); + env_init(); /* initialize environment */ + init_baudrate(); /* initialze baudrate settings */ + serial_init(); /* serial communications setup */ + console_init_f(); + display_banner(); /* say that we are here */ + checkboard(); +#if defined(CONFIG_RTC_BF533) && (CONFIG_COMMANDS & CFG_CMD_DATE) + rtc_init(); +#endif + timer_init(); + printf("Clock: VCO: %lu MHz, Core: %lu MHz, System: %lu MHz\n", \ + CONFIG_VCO_HZ/1000000, CONFIG_CCLK_HZ/1000000, CONFIG_SCLK_HZ/1000000); + printf("SDRAM: "); + print_size(initdram(0), "\n"); + board_init_r((gd_t *) gd, 0x20000010); +} + +void board_init_r(gd_t * id, ulong dest_addr) +{ + DECLARE_GLOBAL_DATA_PTR; + ulong size; + extern void malloc_bin_reloc(void); + char *s, *e; + bd_t *bd; + int i; + gd = id; + gd->flags |= GD_FLG_RELOC; /* tell others: relocation done */ + bd = gd->bd; + +#if CONFIG_STAMP + /* There are some other pointer constants we must deal with */ + /* configure available FLASH banks */ + size = flash_init(); + display_flash_config(size); + flash_protect(FLAG_PROTECT_SET, CFG_FLASH_BASE, CFG_FLASH_BASE + 0x1ffff, &flash_info[0]); + bd->bi_flashstart = CFG_FLASH_BASE; + bd->bi_flashsize = size; + bd->bi_flashoffset = 0; +#else + bd->bi_flashstart = 0; + bd->bi_flashsize = 0; + bd->bi_flashoffset = 0; +#endif + /* initialize malloc() area */ + mem_malloc_init(); + malloc_bin_reloc(); + + /* relocate environment function pointers etc. */ + env_relocate(); + + /* board MAC address */ + s = getenv("ethaddr"); + for (i = 0; i < 6; ++i) { + bd->bi_enetaddr[i] = s ? simple_strtoul(s, &e, 16) : 0; + if (s) + s = (*e) ? e + 1 : e; + } + + /* IP Address */ + bd->bi_ip_addr = getenv_IPaddr("ipaddr"); + + /* Initialize devices */ + devices_init(); + jumptable_init(); + + /* Initialize the console (after the relocation and devices init) */ + console_init_r(); + + /* Initialize from environment */ + if ((s = getenv("loadaddr")) != NULL) { + load_addr = simple_strtoul(s, NULL, 16); + } +#if (CONFIG_COMMANDS & CFG_CMD_NET) + if ((s = getenv("bootfile")) != NULL) { + copy_filename(BootFile, s, sizeof(BootFile)); + } +#endif +#if defined(CONFIG_MISC_INIT_R) + /* miscellaneous platform dependent initialisations */ + misc_init_r(); +#endif + +#ifdef CONFIG_DRIVER_SMC91111 +#ifdef SHARED_RESOURCES + /* Switch to Ethernet */ + swap_to(ETHERNET); +#endif + if ( (SMC_inw(BANK_SELECT) & UPPER_BYTE_MASK) != SMC_IDENT ) { + printf("ERROR: Can't find SMC91111 at address %x\n", SMC_BASE_ADDRESS); + } else { + printf("Net: SMC91111 at 0x%08X\n", SMC_BASE_ADDRESS); + } + +#ifdef SHARED_RESOURCES + swap_to(FLASH); +#endif +#endif +#ifdef CONFIG_SOFT_I2C + init_func_i2c(); +#endif + +#ifdef DEBUG + display_global_data(void); +#endif + + /* main_loop() can return to retry autoboot, if so just run it again. */ + for (;;) { + main_loop(); + } +} + +#ifdef CONFIG_SOFT_I2C +static int init_func_i2c (void) +{ + puts ("I2C: "); + i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE); + puts ("ready\n"); + return (0); +} +#endif + +void hang(void) +{ + puts("### ERROR ### Please RESET the board ###\n"); + for (;;); +} diff --git a/lib_blackfin/cache.c b/lib_blackfin/cache.c new file mode 100644 index 0000000000..4213b861e4 --- /dev/null +++ b/lib_blackfin/cache.c @@ -0,0 +1,41 @@ +/* + * U-boot - cache.c + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* for now: just dummy functions to satisfy the linker */ +extern void blackfin_icache_range(unsigned long *,unsigned long *); +extern void blackfin_dcache_range(unsigned long *,unsigned long *); +void flush_cache(unsigned long dummy1, unsigned long dummy2) +{ + if(icache_status()){ + blackfin_icache_flush_range(dummy1,dummy1+dummy2); + } + if(dcache_status()){ + blackfin_dcache_flush_range(dummy1,dummy1+dummy2); + } + return; +} + diff --git a/lib_blackfin/muldi3.c b/lib_blackfin/muldi3.c new file mode 100644 index 0000000000..a5622424fd --- /dev/null +++ b/lib_blackfin/muldi3.c @@ -0,0 +1,92 @@ +/* + * U-boot - muldi3.c contains routines for mult and div + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* Generic function got from GNU gcc package, libgcc2.c */ +#ifndef SI_TYPE_SIZE +#define SI_TYPE_SIZE 32 +#endif +#define __ll_B (1L << (SI_TYPE_SIZE / 2)) +#define __ll_lowpart(t) ((USItype) (t) % __ll_B) +#define __ll_highpart(t) ((USItype) (t) / __ll_B) +#define BITS_PER_UNIT 8 + +#if !defined (umul_ppmm) +#define umul_ppmm(w1, w0, u, v) \ +do { \ + USItype __x0, __x1, __x2, __x3; \ + USItype __ul, __vl, __uh, __vh; \ + \ + __ul = __ll_lowpart (u); \ + __uh = __ll_highpart (u); \ + __vl = __ll_lowpart (v); \ + __vh = __ll_highpart (v); \ + \ + __x0 = (USItype) __ul * __vl; \ + __x1 = (USItype) __ul * __vh; \ + __x2 = (USItype) __uh * __vl; \ + __x3 = (USItype) __uh * __vh; \ + \ + __x1 += __ll_highpart (__x0);/* this can't give carry */ \ + __x1 += __x2; /* but this indeed can */ \ + if (__x1 < __x2) /* did we get it? */ \ + __x3 += __ll_B; /* yes, add it in the proper pos. */ \ + \ + (w1) = __x3 + __ll_highpart (__x1); \ + (w0) = __ll_lowpart (__x1) * __ll_B + __ll_lowpart (__x0); \ +} while (0) +#endif + +#if !defined (__umulsidi3) +#define __umulsidi3(u, v) \ + ({DIunion __w; \ + umul_ppmm (__w.s.high, __w.s.low, u, v); \ + __w.ll; }) +#endif + +typedef unsigned int USItype __attribute__ ((mode (SI))); +typedef int SItype __attribute__ ((mode (SI))); +typedef int DItype __attribute__ ((mode (DI))); +typedef int word_type __attribute__ ((mode (__word__))); + +struct DIstruct {SItype low, high;}; +typedef union +{ + struct DIstruct s; + DItype ll; +} DIunion; + +DItype __muldi3 (DItype u, DItype v) +{ + DIunion w; + DIunion uu, vv; + + uu.ll = u, + vv.ll = v; + /* panic("kernel panic for __muldi3"); */ + w.ll = __umulsidi3 (uu.s.low, vv.s.low); + w.s.high += ((USItype) uu.s.low * (USItype) vv.s.high + + (USItype) uu.s.high * (USItype) vv.s.low); + + return w.ll; +} diff --git a/rtc/bf533_rtc.c b/rtc/bf533_rtc.c new file mode 100644 index 0000000000..09b8f2157d --- /dev/null +++ b/rtc/bf533_rtc.c @@ -0,0 +1,143 @@ +/* + * (C) Copyright 2001 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * Real Time Clock interface of ADI21535 (Blackfin) for uCLinux + * + * Copyright (C) 2003 Motorola Corporation. All rights reserved. + * Richard Xiao (A2590C@email.mot.com) + * + * Copyright (C) 1996 Paul Gortmaker + * + * + * Based on other minimal char device drivers, like Alan's + * watchdog, Ted's random, etc. etc. + * + * 1.07 Paul Gortmaker. + * 1.08 Miquel van Smoorenburg: disallow certain things on the + * DEC Alpha as the CMOS clock is also used for other things. + * 1.09 Nikita Schmidt: epoch support and some Alpha cleanup. + * 1.09a Pete Zaitcev: Sun SPARC + * 1.09b Jeff Garzik: Modularize, init cleanup + * 1.09c Jeff Garzik: SMP cleanup + * 1.10 Paul Barton-Davis: add support for async I/O + * 1.10a Andrea Arcangeli: Alpha updates + * 1.10b Andrew Morton: SMP lock fix + * 1.10c Cesar Barros: SMP locking fixes and cleanup + * 1.10d Paul Gortmaker: delete paranoia check in rtc_exit + * 1.10e LG Soft India: Register access is different in BF533. + */ + +#include +#include +#include + +#if defined(CONFIG_RTC_BF533) && (CONFIG_COMMANDS & CFG_CMD_DATE) + +#include +#include + +void rtc_reset(void) +{ + return; /* nothing to do */ +} + +/* Wait for pending writes to complete */ +void wait_for_complete(void) +{ + while (!(*(volatile unsigned short *) RTC_ISTAT & 0x8000)) { + printf(""); + } + *(volatile unsigned short *) RTC_ISTAT = 0x8000; +} + +/* Enable the RTC prescaler enable register */ +void rtc_init() +{ + *(volatile unsigned short *) RTC_PREN = 0x1; + wait_for_complete(); +} + +/* Set the time. Get the time_in_secs which is the number of seconds since Jan 1970 and set the RTC registers + * based on this value. + */ +void rtc_set (struct rtc_time *tmp) +{ + unsigned long n_days_1970 = 0; + unsigned long n_secs_rem = 0; + unsigned long n_hrs = 0; + unsigned long n_mins = 0; + unsigned long n_secs = 0; + unsigned long time_in_secs; + + if(tmp == NULL) { + printf("Error setting the date/time \n"); + return; + } + + time_in_secs = mktime(tmp->tm_year, tmp->tm_mon, tmp->tm_mday,tmp->tm_hour, tmp->tm_min, tmp->tm_sec); + + /* Compute no. of days since 1970 */ + n_days_1970 = (unsigned long) (time_in_secs / (NUM_SECS_IN_DAY)); + + /* From the remining secs, compute the hrs(0-23), mins(0-59) and secs(0-59) */ + n_secs_rem = (unsigned long)(time_in_secs % (NUM_SECS_IN_DAY)); + n_hrs = n_secs_rem / (NUM_SECS_IN_HOUR); + n_secs_rem = n_secs_rem % (NUM_SECS_IN_HOUR); + n_mins = n_secs_rem / (NUM_SECS_IN_MIN); + n_secs = n_secs_rem % (NUM_SECS_IN_MIN); + + /* Store the new time in the RTC_STAT register */ + *(volatile unsigned long *) RTC_STAT = + ((n_days_1970 << DAY_BITS_OFF) | (n_hrs << HOUR_BITS_OFF) | + (n_mins << MIN_BITS_OFF) | (n_secs << SEC_BITS_OFF)); + + wait_for_complete(); +} + +/* Read the time from the RTC_STAT. time_in_seconds is seconds since Jan 1970 */ +void rtc_get (struct rtc_time *tmp) +{ + unsigned long cur_rtc_stat = 0; + unsigned long time_in_sec; + unsigned long tm_sec = 0, tm_min = 0, tm_hour = 0, tm_day = 0; + + if(tmp == NULL) { + printf("Error getting the date/time \n"); + return; + } + + /* Read the RTC_STAT register */ + cur_rtc_stat = *(volatile unsigned long *) RTC_STAT; + + /* Get the secs (0-59), mins (0-59), hrs (0-23) and the days since Jan 1970 */ + tm_sec = (cur_rtc_stat >> SEC_BITS_OFF) & 0x3f; + tm_min = (cur_rtc_stat >> MIN_BITS_OFF) & 0x3f; + tm_hour = (cur_rtc_stat >> HOUR_BITS_OFF) & 0x1f; + tm_day = (cur_rtc_stat >> DAY_BITS_OFF) & 0x7fff; + + /* Calculate the total number of seconds since Jan 1970 */ + time_in_sec = (tm_sec) + + MIN_TO_SECS(tm_min) + + HRS_TO_SECS(tm_hour) + + DAYS_TO_SECS(tm_day); + to_tm(time_in_sec,tmp); +} +#endif /* CONFIG_RTC_BF533 && CFG_CMD_DATE */ -- 2.39.5