From 6f21347d49b1741e4b8247f5e2d3fa83ef169c25 Mon Sep 17 00:00:00 2001
From: wdenk <wdenk>
Date: Fri, 29 Aug 2003 22:00:43 +0000
Subject: [PATCH] * Patch by George G. Davis, 19 Aug 2003:   fix TI
 Innovator/OMAP1510 pin configs

* Patches by Kshitij, 18 Aug 2003
  - add support for arm926ejs cpu core
  - add support for TI OMAP 1610 Innovator Board
---
 CHANGELOG                              |   7 +
 MAINTAINERS                            |   1 +
 MAKEALL                                |   6 +-
 Makefile                               |   3 +
 README                                 |   7 +-
 board/omap1510inn/platform.S           |   7 +-
 board/omap1610inn/Makefile             |  47 +++
 board/omap1610inn/config.mk            |  26 ++
 board/omap1610inn/flash.c              | 482 +++++++++++++++++++++++++
 board/omap1610inn/omap1610innovator.c  | 270 ++++++++++++++
 board/omap1610inn/platform.S           | 385 ++++++++++++++++++++
 board/omap1610inn/u-boot.lds           |  51 +++
 cpu/arm926ejs/Makefile                 |  43 +++
 cpu/arm926ejs/config.mk                |  27 ++
 cpu/arm926ejs/cpu.c                    | 159 ++++++++
 cpu/arm926ejs/interrupts.c             | 293 +++++++++++++++
 cpu/arm926ejs/start.S                  | 426 ++++++++++++++++++++++
 drivers/ns16550.c                      |   5 +-
 drivers/serial.c                       |   6 +
 include/arm926ejs.h                    |   8 +
 include/asm-arm/arch-arm926ejs/sizes.h |  51 +++
 include/configs/omap1510.h             |  13 +
 include/configs/omap1610inn.h          | 169 +++++++++
 include/flash.h                        |   3 +
 include/ns16550.h                      |   4 +-
 25 files changed, 2490 insertions(+), 9 deletions(-)
 create mode 100644 board/omap1610inn/Makefile
 create mode 100644 board/omap1610inn/config.mk
 create mode 100644 board/omap1610inn/flash.c
 create mode 100644 board/omap1610inn/omap1610innovator.c
 create mode 100644 board/omap1610inn/platform.S
 create mode 100644 board/omap1610inn/u-boot.lds
 create mode 100644 cpu/arm926ejs/Makefile
 create mode 100644 cpu/arm926ejs/config.mk
 create mode 100644 cpu/arm926ejs/cpu.c
 create mode 100644 cpu/arm926ejs/interrupts.c
 create mode 100644 cpu/arm926ejs/start.S
 create mode 100644 include/arm926ejs.h
 create mode 100644 include/asm-arm/arch-arm926ejs/sizes.h
 create mode 100644 include/configs/omap1610inn.h

diff --git a/CHANGELOG b/CHANGELOG
index 1ca0573140..24a8169ccf 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,13 @@
 Changes for U-Boot 0.4.7:
 ======================================================================
 
+* Patch by George G. Davis, 19 Aug 2003:
+  fix TI Innovator/OMAP1510 pin configs
+
+* Patches by Kshitij, 18 Aug 2003
+  - add support for arm926ejs cpu core
+  - add support for TI OMAP 1610 Innovator Board
+
 * Patch by Yuli Barcohen, 14 Aug 2003:
   add support for bzip2 uncompression
 
diff --git a/MAINTAINERS b/MAINTAINERS
index 7f50738134..16240a8f34 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -278,6 +278,7 @@ Gary Jennejohn <gj@denx.de>
 
 Kshitij Gupta <kshitij@ti.com>
 	omap1510inn		ARM925T
+	omap1610inn		ARM926EJS
 
 David Müller <d.mueller@elsoft.ch>
 
diff --git a/MAKEALL b/MAKEALL
index af5af6af90..76aca98828 100644
--- a/MAKEALL
+++ b/MAKEALL
@@ -117,7 +117,11 @@ LIST_ARM7="ep7312 impa7"
 ## ARM9 Systems
 #########################################################################
 
-LIST_ARM9="at91rm9200dk omap1510inn smdk2400 smdk2410 trab VCMA9"
+LIST_ARM9="	\
+	at91rm9200dk	omap1510inn	omap1610inn			\
+	smdk2400	smdk2410	trab				\
+	VCMA9								\
+"
 
 #########################################################################
 ## Xscale Systems
diff --git a/Makefile b/Makefile
index ad0de2c781..060c1c065b 100644
--- a/Makefile
+++ b/Makefile
@@ -776,6 +776,9 @@ xtract_trab = $(subst _big_flash,,$(subst _config,,$1))
 omap1510inn_config :	unconfig
 	@./mkconfig $(@:_config=) arm arm925t omap1510inn
 
+omap1610inn_config :	unconfig
+	@./mkconfig $(@:_config=) arm arm926ejs omap1610inn
+
 smdk2400_config	:	unconfig
 	@./mkconfig $(@:_config=) arm arm920t smdk2400
 
diff --git a/README b/README
index f70ff47a2a..26127fa01e 100644
--- a/README
+++ b/README
@@ -141,6 +141,7 @@ Directory Hierarchy:
 
 - cpu/74xx_7xx	Files specific to Motorola MPC74xx and 7xx CPUs
 - cpu/arm925t	Files specific to ARM	   925	   CPUs
+- cpu/arm926ejs	Files specific to ARM	926	CPUs
 - cpu/mpc5xx	Files specific to Motorola MPC5xx  CPUs
 - cpu/mpc8xx	Files specific to Motorola MPC8xx  CPUs
 - cpu/mpc824x	Files specific to Motorola MPC824x CPUs
@@ -208,6 +209,8 @@ Directory Hierarchy:
 - board/oxc	Files specific to OXC        boards
 - board/omap1510inn
 		Files specific to OMAP 1510 Innovator boards
+- board/omap1610inn  
+		Files specific to OMAP 1610 Innovator boards
 - board/pcippc2	Files specific to PCIPPC2/PCIPPC6 boards
 - board/pm826	Files specific to PM826      boards
 - board/ppmc8260
@@ -357,7 +360,7 @@ The following options need to be configured:
 
 		CONFIG_HHP_CRADLE,  CONFIG_DNP1110,    CONFIG_EP7312,
 		CONFIG_IMPA7,       CONFIG_LART,       CONFIG_LUBBOCK,
-		CONFIG_INNOVATOROMAP1510,
+		CONFIG_INNOVATOROMAP1510,	CONFIG_INNOVATOROMAP1610
 		CONFIG_SHANNON,     CONFIG_SMDK2400,   CONFIG_SMDK2410,
 		CONFIG_TRAB,	    CONFIG_AT91RM9200DK
 
@@ -1905,7 +1908,7 @@ configurations; the following names are supported:
     GEN860T_config	  EBONY_config		FPS860L_config
     ELPT860_config	  cmi_mpc5xx_config	NETVIA_config
     at91rm9200dk_config	  omap1510inn_config	MPC8260ADS_config
-
+    omap1610inn_config
 Note: for some board special configuration names may exist; check  if
       additional  information is available from the board vendor; for
       instance, the TQM8xxL systems run normally at 50 MHz and use  a
diff --git a/board/omap1510inn/platform.S b/board/omap1510inn/platform.S
index a1602d14c6..709fe04d2a 100644
--- a/board/omap1510inn/platform.S
+++ b/board/omap1510inn/platform.S
@@ -84,6 +84,9 @@ platformsetup:
 	ldr     r0, REG_FUNC_MUX_CTRL_C
 	ldr     r1, VAL_FUNC_MUX_CTRL_C
 	str     r1, [r0]
+	ldr     r0, REG_FUNC_MUX_CTRL_D
+	ldr     r1, VAL_FUNC_MUX_CTRL_D
+	str     r1, [r0]
 	ldr     r0, REG_VOLTAGE_CTRL_0
 	ldr     r1, VAL_VOLTAGE_CTRL_0
 	str     r1, [r0]
@@ -352,9 +355,9 @@ VAL_PULL_DWN_CTRL_0:
 VAL_PULL_DWN_CTRL_1:
 	.word 0x2e047fff
 VAL_PULL_DWN_CTRL_2:
-	.word 0xffd7d3e6
+	.word 0xffd603a6
 VAL_PULL_DWN_CTRL_3:
-	.word 0x00003f03
+	.word 0x00003e03
 VAL_VOLTAGE_CTRL_0:
 	.word 0x00000007
 VAL_TEST_DBG_CTRL_0:
diff --git a/board/omap1610inn/Makefile b/board/omap1610inn/Makefile
new file mode 100644
index 0000000000..4a96b8334b
--- /dev/null
+++ b/board/omap1610inn/Makefile
@@ -0,0 +1,47 @@
+#
+# (C) Copyright 2000, 2001, 2002
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS	:= omap1610innovator.o flash.o
+SOBJS	:= platform.o
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) crv $@ $^
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+-include .depend
+
+#########################################################################
diff --git a/board/omap1610inn/config.mk b/board/omap1610inn/config.mk
new file mode 100644
index 0000000000..241cb97d25
--- /dev/null
+++ b/board/omap1610inn/config.mk
@@ -0,0 +1,26 @@
+#
+# (C) Copyright 2002
+# Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+# David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
+#
+# (C) Copyright 2003
+# Texas Instruments, <www.ti.com>
+# Kshitij Gupta <Kshitij@ti.com>
+#
+# TI Innovator board with OMAP1610 (ARM925EJS) cpu
+# see http://www.ti.com/ for more information on Texas Instruments
+#
+# Innovator has 1 bank of 256 MB SDRAM
+# Physical Address:
+# 1000'0000 to 2000'0000
+#
+#
+# Linux-Kernel is expected to be at 1000'8000, entry 1000'8000
+# (mem base + reserved)
+#
+# we load ourself to 1100'0000
+#
+#
+
+
+TEXT_BASE = 0x11000000
diff --git a/board/omap1610inn/flash.c b/board/omap1610inn/flash.c
new file mode 100644
index 0000000000..59f5b68b38
--- /dev/null
+++ b/board/omap1610inn/flash.c
@@ -0,0 +1,482 @@
+/*
+ * (C) Copyright 2001
+ * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
+ *
+ * (C) Copyright 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2003
+ * Texas Instruments, <www.ti.com>
+ * Kshitij Gupta <Kshitij@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <linux/byteorder/swab.h>
+
+#define PHYS_FLASH_SECT_SIZE	0x00020000	/* 256 KB sectors (x2) */
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips    */
+
+/* Board support for 1 or 2 flash devices */
+#undef FLASH_PORT_WIDTH32
+#define FLASH_PORT_WIDTH16
+
+#ifdef FLASH_PORT_WIDTH16
+#define FLASH_PORT_WIDTH		ushort
+#define FLASH_PORT_WIDTHV		vu_short
+#define SWAP(x)			__swab16(x)
+#else
+#define FLASH_PORT_WIDTH		ulong
+#define FLASH_PORT_WIDTHV		vu_long
+#define SWAP(x)			__swab32(x)
+#endif
+
+#define FPW	FLASH_PORT_WIDTH
+#define FPWV	FLASH_PORT_WIDTHV
+
+#define mb() __asm__ __volatile__ ("" : : : "memory")
+
+
+
+/* Flash Organization Structure */
+typedef struct OrgDef {
+	unsigned int sector_number;
+	unsigned int sector_size;
+} OrgDef;
+
+
+/* Flash Organizations */
+OrgDef OrgIntel_28F256L18T[] = {
+	{4, 32 * 1024},				/* 4 * 32kBytes sectors */
+	{255, 128 * 1024},			/* 255 * 128kBytes sectors */
+};
+
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+unsigned long flash_init (void);
+static ulong flash_get_size (FPW * addr, flash_info_t * info);
+static int write_data (flash_info_t * info, ulong dest, FPW data);
+static void flash_get_offsets (ulong base, flash_info_t * info);
+void inline spin_wheel (void);
+void flash_print_info (flash_info_t * info);
+void flash_unprotect_sectors (FPWV * addr);
+int flash_erase (flash_info_t * info, int s_first, int s_last);
+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt);
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+	int i;
+	ulong size = 0;
+	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+		switch (i) {
+		case 0:
+			flash_get_size ((FPW *) PHYS_FLASH_1, &flash_info[i]);
+			flash_get_offsets (PHYS_FLASH_1, &flash_info[i]);
+			break;
+		default:
+			panic ("configured to many flash banks!\n");
+			break;
+		}
+		size += flash_info[i].size;
+	}
+
+	/* Protect monitor and environment sectors
+	 */
+	flash_protect (FLAG_PROTECT_SET,
+			CFG_FLASH_BASE,
+			CFG_FLASH_BASE + monitor_flash_len - 1, &flash_info[0]);
+
+	flash_protect (FLAG_PROTECT_SET,
+			CFG_ENV_ADDR,
+			CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]);
+
+	return size;
+}
+
+/*-----------------------------------------------------------------------
+ */
+static void flash_get_offsets (ulong base, flash_info_t * info)
+{
+	int i;
+	OrgDef *pOrgDef;
+
+	pOrgDef = OrgIntel_28F256L18T;
+	if (info->flash_id == FLASH_UNKNOWN) {
+		return;
+	}
+
+	if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
+		for (i = 0; i < info->sector_count; i++) {
+			if (i > 255) {
+				info->start[i] = base + (i * 0x8000);
+				info->protect[i] = 0;
+			} else {
+				info->start[i] = base +
+						(i * PHYS_FLASH_SECT_SIZE);
+				info->protect[i] = 0;
+			}
+		}
+	}
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info (flash_info_t * info)
+{
+	int i;
+
+	if (info->flash_id == FLASH_UNKNOWN) {
+		printf ("missing or unknown FLASH type\n");
+		return;
+	}
+
+	switch (info->flash_id & FLASH_VENDMASK) {
+	case FLASH_MAN_INTEL:
+		printf ("INTEL ");
+		break;
+	default:
+		printf ("Unknown Vendor ");
+		break;
+	}
+
+	switch (info->flash_id & FLASH_TYPEMASK) {
+	case FLASH_28F256L18T:
+		printf ("FLASH 28F256L18T\n");
+		break;
+	default:
+		printf ("Unknown Chip Type\n");
+		break;
+	}
+
+	printf ("  Size: %ld MB in %d Sectors\n",
+			info->size >> 20, info->sector_count);
+
+	printf ("  Sector Start Addresses:");
+	for (i = 0; i < info->sector_count; ++i) {
+		if ((i % 5) == 0)
+			printf ("\n   ");
+		printf (" %08lX%s",
+			info->start[i], info->protect[i] ? " (RO)" : "     ");
+	}
+	printf ("\n");
+	return;
+}
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+static ulong flash_get_size (FPW * addr, flash_info_t * info)
+{
+	volatile FPW value;
+
+	/* Write auto select command: read Manufacturer ID */
+	addr[0x5555] = (FPW) 0x00AA00AA;
+	addr[0x2AAA] = (FPW) 0x00550055;
+	addr[0x5555] = (FPW) 0x00900090;
+
+	mb ();
+	value = addr[0];
+
+	switch (value) {
+
+	case (FPW) INTEL_MANUFACT:
+		info->flash_id = FLASH_MAN_INTEL;
+		break;
+
+	default:
+		info->flash_id = FLASH_UNKNOWN;
+		info->sector_count = 0;
+		info->size = 0;
+		addr[0] = (FPW) 0x00FF00FF;	/* restore read mode */
+		return (0);		/* no or unknown flash  */
+	}
+
+	mb ();
+	value = addr[1];	/* device ID        */
+	switch (value) {
+
+	case (FPW) (INTEL_ID_28F256L18T):
+		info->flash_id += FLASH_28F256L18T;
+		info->sector_count = 259;
+		info->size = 0x02000000;
+		break;			/* => 32 MB     */
+
+	default:
+		info->flash_id = FLASH_UNKNOWN;
+		break;
+	}
+
+	if (info->sector_count > CFG_MAX_FLASH_SECT) {
+		printf ("** ERROR: sector count %d > max (%d) **\n",
+				info->sector_count, CFG_MAX_FLASH_SECT);
+		info->sector_count = CFG_MAX_FLASH_SECT;
+	}
+
+	addr[0] = (FPW) 0x00FF00FF;	/* restore read mode */
+
+	return (info->size);
+}
+
+
+
+
+/* unprotects a sector for write and erase
+ * on some intel parts, this unprotects the entire chip, but it
+ * wont hurt to call this additional times per sector...
+ */
+void flash_unprotect_sectors (FPWV * addr)
+{
+#define PD_FINTEL_WSMS_READY_MASK    0x0080
+
+	*addr = (FPW) 0x00500050;	/* clear status register */
+
+	/* this sends the clear lock bit command */
+	*addr = (FPW) 0x00600060;
+	*addr = (FPW) 0x00D000D0;
+}
+
+
+/*-----------------------------------------------------------------------
+ */
+
+int flash_erase (flash_info_t * info, int s_first, int s_last)
+{
+	int flag, prot, sect;
+	ulong type, start, last;
+	int rcode = 0;
+
+	if ((s_first < 0) || (s_first > s_last)) {
+		if (info->flash_id == FLASH_UNKNOWN) {
+			printf ("- missing\n");
+		} else {
+			printf ("- no sectors to erase\n");
+		}
+		return 1;
+	}
+
+	type = (info->flash_id & FLASH_VENDMASK);
+	if ((type != FLASH_MAN_INTEL)) {
+		printf ("Can't erase unknown flash type %08lx - aborted\n",
+				info->flash_id);
+		return 1;
+	}
+
+	prot = 0;
+	for (sect = s_first; sect <= s_last; ++sect) {
+		if (info->protect[sect]) {
+			prot++;
+		}
+	}
+
+	if (prot) {
+		printf ("- Warning: %d protected sectors will not be erased!\n",
+				prot);
+	} else {
+		printf ("\n");
+	}
+
+
+
+
+	start = get_timer (0);
+	last = start;
+
+	/* Disable interrupts which might cause a timeout here */
+	flag = disable_interrupts ();
+
+	/* Start erase on unprotected sectors */
+	for (sect = s_first; sect <= s_last; sect++) {
+		if (info->protect[sect] == 0) {	/* not protected */
+			FPWV *addr = (FPWV *) (info->start[sect]);
+			FPW status;
+
+			printf ("Erasing sector %2d ... ", sect);
+
+			flash_unprotect_sectors (addr);
+
+			/* arm simple, non interrupt dependent timer */
+			reset_timer_masked ();
+
+			*addr = (FPW) 0x00500050;/* clear status register */
+			*addr = (FPW) 0x00200020;/* erase setup */
+			*addr = (FPW) 0x00D000D0;/* erase confirm */
+
+			while (((status =
+				*addr) & (FPW) 0x00800080) !=
+				(FPW) 0x00800080) {
+					if (get_timer_masked () > 
+					CFG_FLASH_ERASE_TOUT) {
+					printf ("Timeout\n");
+					/* suspend erase     */
+					*addr = (FPW) 0x00B000B0;
+					/* reset to read mode */
+					*addr = (FPW) 0x00FF00FF;
+					rcode = 1;
+					break;
+				}
+			}
+
+			/* clear status register cmd.   */
+			*addr = (FPW) 0x00500050;
+			*addr = (FPW) 0x00FF00FF;/* resest to read mode */
+			printf (" done\n");
+		}
+	}
+	return rcode;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ * 4 - Flash not identified
+ */
+
+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
+{
+	ulong cp, wp;
+	FPW data;
+	int count, i, l, rc, port_width;
+
+	if (info->flash_id == FLASH_UNKNOWN) {
+		return 4;
+	}
+/* get lower word aligned address */
+#ifdef FLASH_PORT_WIDTH16
+	wp = (addr & ~1);
+	port_width = 2;
+#else
+	wp = (addr & ~3);
+	port_width = 4;
+#endif
+
+	/*
+	 * handle unaligned start bytes
+	 */
+	if ((l = addr - wp) != 0) {
+		data = 0;
+		for (i = 0, cp = wp; i < l; ++i, ++cp) {
+			data = (data << 8) | (*(uchar *) cp);
+		}
+		for (; i < port_width && cnt > 0; ++i) {
+			data = (data << 8) | *src++;
+			--cnt;
+			++cp;
+		}
+		for (; cnt == 0 && i < port_width; ++i, ++cp) {
+			data = (data << 8) | (*(uchar *) cp);
+		}
+
+		if ((rc = write_data (info, wp, SWAP (data))) != 0) {
+			return (rc);
+		}
+		wp += port_width;
+	}
+
+	/*
+	 * handle word aligned part
+	 */
+	count = 0;
+	while (cnt >= port_width) {
+		data = 0;
+		for (i = 0; i < port_width; ++i) {
+			data = (data << 8) | *src++;
+		}
+		if ((rc = write_data (info, wp, SWAP (data))) != 0) {
+			return (rc);
+		}
+		wp += port_width;
+		cnt -= port_width;
+		if (count++ > 0x800) {
+			spin_wheel ();
+			count = 0;
+		}
+	}
+
+	if (cnt == 0) {
+		return (0);
+	}
+
+	/*
+	 * handle unaligned tail bytes
+	 */
+	data = 0;
+	for (i = 0, cp = wp; i < port_width && cnt > 0; ++i, ++cp) {
+		data = (data << 8) | *src++;
+		--cnt;
+	}
+	for (; i < port_width; ++i, ++cp) {
+		data = (data << 8) | (*(uchar *) cp);
+	}
+
+	return (write_data (info, wp, SWAP (data)));
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word or halfword to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_data (flash_info_t * info, ulong dest, FPW data)
+{
+	FPWV *addr = (FPWV *) dest;
+	ulong status;
+	int flag;
+
+	/* Check if Flash is (sufficiently) erased */
+	if ((*addr & data) != data) {
+		printf ("not erased at %08lx (%x)\n", (ulong) addr, *addr);
+		return (2);
+	}
+	flash_unprotect_sectors (addr);
+	/* Disable interrupts which might cause a timeout here */
+	flag = disable_interrupts ();
+	*addr = (FPW) 0x00400040;	/* write setup */
+	*addr = data;
+
+	/* arm simple, non interrupt dependent timer */
+	reset_timer_masked ();
+
+	/* wait while polling the status register */
+	while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
+		if (get_timer_masked () > CFG_FLASH_WRITE_TOUT) {
+			*addr = (FPW) 0x00FF00FF;	/* restore read mode */
+			return (1);
+		}
+	}
+	*addr = (FPW) 0x00FF00FF;	/* restore read mode */
+	return (0);
+}
+
+void inline spin_wheel (void)
+{
+	static int p = 0;
+	static char w[] = "\\/-";
+
+	printf ("\010%c", w[p]);
+	(++p == 3) ? (p = 0) : 0;
+}
diff --git a/board/omap1610inn/omap1610innovator.c b/board/omap1610inn/omap1610innovator.c
new file mode 100644
index 0000000000..d737f1b330
--- /dev/null
+++ b/board/omap1610inn/omap1610innovator.c
@@ -0,0 +1,270 @@
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
+ *
+ * (C) Copyright 2003
+ * Texas Instruments, <www.ti.com>
+ * Kshitij Gupta <Kshitij@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#if defined(CONFIG_OMAP1610)
+#include <./configs/omap1510.h>
+#endif
+
+void flash__init (void);
+void ether__init (void);
+void set_muxconf_regs (void);
+void peripheral_power_enable (void);
+
+#define COMP_MODE_ENABLE ((unsigned int)0x0000EAEF)
+
+static inline void delay (unsigned long loops)
+{
+	__asm__ volatile ("1:\n"
+		"subs %0, %1, #1\n"
+		"bne 1b":"=r" (loops):"0" (loops));
+}
+
+/*
+ * Miscellaneous platform dependent initialisations
+ */
+
+int board_init (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	/* arch number of OMAP 1510-Board */
+	/* to be changed for OMAP 1610 Board */
+	gd->bd->bi_arch_number = 234;
+
+	/* adress of boot parameters */
+	gd->bd->bi_boot_params = 0x10000100;
+
+	/* Configure MUX settings */
+	set_muxconf_regs ();
+	peripheral_power_enable ();
+
+/* this speeds up your boot a quite a bit.  However to make it
+ *  work, you need make sure your kernel startup flush bug is fixed.
+ *  ... rkw ...
+ */
+	icache_enable ();
+
+	flash__init ();
+	ether__init ();
+	return 0;
+}
+
+
+int misc_init_r (void)
+{
+	/* currently empty */
+	return (0);
+}
+
+/******************************
+ Routine:
+ Description:
+******************************/
+void flash__init (void)
+{
+#define EMIFS_GlB_Config_REG 0xfffecc0c
+	unsigned int regval;
+	regval = *((volatile unsigned int *) EMIFS_GlB_Config_REG);
+	/* Turn off write protection for flash devices. */
+	regval = regval | 0x0001;
+	*((volatile unsigned int *) EMIFS_GlB_Config_REG) = regval;
+}
+/*************************************************************
+ Routine:ether__init
+ Description: take the Ethernet controller out of reset and wait
+	  		   for the EEPROM load to complete.
+*************************************************************/
+void ether__init (void)
+{
+#define ETH_CONTROL_REG 0x0400000b
+
+	*((volatile unsigned char *) ETH_CONTROL_REG) &= ~0x01;
+	udelay (3);
+}
+
+/******************************
+ Routine:
+ Description:
+******************************/
+int dram_init (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+
+	return 0;
+}
+
+/******************************************************
+ Routine: set_muxconf_regs
+ Description: Setting up the configuration Mux registers
+ 			  specific to the hardware
+*******************************************************/
+void set_muxconf_regs (void)
+{
+	volatile unsigned int *MuxConfReg;
+	/* set each registers to its reset value; */
+	MuxConfReg =
+		(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_0);
+	/* setup for UART1 */
+	*MuxConfReg &= ~(0x02000000);	/* bit 25 */
+	/* setup for UART2 */
+	*MuxConfReg &= ~(0x01000000);	/* bit 24 */
+	/* Disable Uwire CS Hi-Z */
+	*MuxConfReg |= 0x08000000;
+	MuxConfReg =
+		(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_3);
+	*MuxConfReg = 0x00000000;
+	MuxConfReg =
+		(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_4);
+	*MuxConfReg = 0x00000000;
+	MuxConfReg =
+		(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_5);
+	*MuxConfReg = 0x00000000;
+	MuxConfReg =
+		(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_6);
+	/*setup mux for UART3 */
+	*MuxConfReg |= 0x00000001;	/* bit3, 1, 0 (mux0 5,5,26) */
+	*MuxConfReg &= ~0x0000003e;
+	MuxConfReg =
+		(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_7);
+	*MuxConfReg = 0x00000000;
+	MuxConfReg =
+		(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_8);
+	/* Disable Uwire CS Hi-Z */
+	*MuxConfReg |= 0x00001200;	/*bit 9 for CS0 12 for CS3 */
+	MuxConfReg =
+		(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_9);
+	/*  Need to turn on bits 21 and 12 in FUNC_MUX_CTRL_9 so the  */
+	/*  hardware will actually use TX and RTS based on bit 25 in  */
+	/*  FUNC_MUX_CTRL_0.  I told you this thing was screwy!  */
+	*MuxConfReg |= 0x00201000;
+	MuxConfReg =
+		(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_A);
+	*MuxConfReg = 0x00000000;
+	MuxConfReg =
+		(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_B);
+	*MuxConfReg = 0x00000000;
+	MuxConfReg =
+		(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_C);
+	/* setup for UART2 */
+	/*  Need to turn on bits 27 and 24 in FUNC_MUX_CTRL_C so the  */
+	/*  hardware will actually use TX and RTS based on bit 24 in  */
+	/*  FUNC_MUX_CTRL_0. */
+	*MuxConfReg |= 0x09000000;
+	MuxConfReg =
+		(volatile unsigned int *) ((unsigned int) PULL_DWN_CTRL_0);
+	*MuxConfReg = 0x00000000;
+	MuxConfReg =
+		(volatile unsigned int *) ((unsigned int) PULL_DWN_CTRL_1);
+	*MuxConfReg = 0x00000000;
+	/* mux setup for SD/MMC driver */
+	MuxConfReg =
+		(volatile unsigned int *) ((unsigned int) PULL_DWN_CTRL_2);
+	*MuxConfReg &= 0xFFFE0FFF;
+	MuxConfReg =
+		(volatile unsigned int *) ((unsigned int) PULL_DWN_CTRL_3);
+	*MuxConfReg = 0x00000000;
+	MuxConfReg =
+		(volatile unsigned int *) ((unsigned int) MOD_CONF_CTRL_0);
+	/* bit 13 for MMC2 XOR_CLK */
+	*MuxConfReg &= ~(0x00002000);
+	/* bit 29 for UART 1 */
+	*MuxConfReg &= ~(0x00002000);
+	MuxConfReg =
+		(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_0);
+	/* Configure for USB. Turn on VBUS_CTRL and VBUS_MODE. */
+	*MuxConfReg |= 0x000C0000;
+	MuxConfReg =
+		(volatile unsigned int *) ((unsigned int)USB_TRANSCEIVER_CTRL);
+	*MuxConfReg &= ~(0x00000070);
+	*MuxConfReg &= ~(0x00000008);
+	*MuxConfReg |= 0x00000003;
+	*MuxConfReg |= 0x00000180;
+	MuxConfReg =
+		(volatile unsigned int *) ((unsigned int) MOD_CONF_CTRL_0);
+	/* bit 17, software controls VBUS */
+	*MuxConfReg &= ~(0x00020000);
+	/* Enable USB 48 and 12M clocks */
+	*MuxConfReg |= 0x00000200;
+	*MuxConfReg &= ~(0x00000180);
+	/*2.75V for MMCSDIO1 */
+	MuxConfReg =
+		(volatile unsigned int *) ((unsigned int) VOLTAGE_CTRL_0);
+	*MuxConfReg = 0x00001FE7;
+	MuxConfReg =
+		(volatile unsigned int *) ((unsigned int) PU_PD_SEL_0);
+	*MuxConfReg = 0x00000000;
+	MuxConfReg =
+		(volatile unsigned int *) ((unsigned int) PU_PD_SEL_1);
+	*MuxConfReg = 0x00000000;
+	MuxConfReg =
+		(volatile unsigned int *) ((unsigned int) PU_PD_SEL_2);
+	*MuxConfReg = 0x00000000;
+	MuxConfReg =
+		(volatile unsigned int *) ((unsigned int) PU_PD_SEL_3);
+	*MuxConfReg = 0x00000000;
+	MuxConfReg =
+		(volatile unsigned int *) ((unsigned int) PU_PD_SEL_4);
+	*MuxConfReg = 0x00000000;
+	MuxConfReg =
+		(volatile unsigned int *) ((unsigned int) PULL_DWN_CTRL_4);
+	*MuxConfReg = 0x00000000;
+	/* Turn on UART2 48 MHZ clock */
+	MuxConfReg =
+		(volatile unsigned int *) ((unsigned int) MOD_CONF_CTRL_0);
+	*MuxConfReg |= 0x40000000;
+	MuxConfReg =
+		(volatile unsigned int *) ((unsigned int) USB_OTG_CTRL);
+	/* setup for USB VBus detection OMAP161x */
+	*MuxConfReg |= 0x00040000;	/* bit 18 */
+	MuxConfReg =
+		(volatile unsigned int *) ((unsigned int) PU_PD_SEL_2);
+	/* PullUps for SD/MMC driver */
+	*MuxConfReg |= ~(0xFFFE0FFF);
+	MuxConfReg =
+		(volatile unsigned int *) ((unsigned int)COMP_MODE_CTRL_0);
+	*MuxConfReg = COMP_MODE_ENABLE;
+}
+
+/******************************************************
+ Routine: peripheral_power_enable
+ Description: Enable the power for UART1
+*******************************************************/
+void peripheral_power_enable (void)
+{
+#define UART1_48MHZ_ENABLE	((unsigned short)0x0200)
+#define SW_CLOCK_REQUEST	((volatile unsigned short *)0xFFFE0834)
+
+	*SW_CLOCK_REQUEST |= UART1_48MHZ_ENABLE;
+}
diff --git a/board/omap1610inn/platform.S b/board/omap1610inn/platform.S
new file mode 100644
index 0000000000..9e3fc4f63d
--- /dev/null
+++ b/board/omap1610inn/platform.S
@@ -0,0 +1,385 @@
+/*
+ * Board specific setup info
+ *
+ * (C) Copyright 2003
+ * Texas Instruments, <www.ti.com>
+ * Kshitij Gupta <Kshitij@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+
+#if defined(CONFIG_OMAP1610)
+#include <./configs/omap1510.h>
+#endif
+
+
+_TEXT_BASE:
+	.word	TEXT_BASE	/* sdram load addr from config.mk */
+
+.globl platformsetup
+platformsetup:
+
+
+	/*------------------------------------------------------*
+	 * Set up ARM CLM registers (IDLECT1)                   *
+	 *------------------------------------------------------*/
+	ldr	r0,	REG_ARM_IDLECT1
+	ldr	r1,	VAL_ARM_IDLECT1
+	str	r1,	[r0]
+
+	/*------------------------------------------------------*
+	 * Set up ARM CLM registers (IDLECT2)  		        *
+	 *------------------------------------------------------*/
+	ldr	r0,	REG_ARM_IDLECT2
+	ldr	r1,	VAL_ARM_IDLECT2
+	str	r1,	[r0]
+
+	/*------------------------------------------------------*
+	 * Set up ARM CLM registers (IDLECT3)		        *
+	 *------------------------------------------------------*/
+	ldr	r0,	REG_ARM_IDLECT3
+	ldr	r1,	VAL_ARM_IDLECT3
+	str	r1,	[r0]
+
+
+	mov	r1,	#0x01		/* PER_EN bit */
+	ldr	r0,	REG_ARM_RSTCT2
+	strh	r1,	[r0]		/* CLKM; Peripheral reset. */
+
+	/* Set CLKM to Sync-Scalable	*/
+	/* I supposedly need to enable the dsp clock before switching */
+	mov	r1,	#0x0000
+	ldr	r0,	REG_ARM_SYSST
+	strh	r1,	[r0]
+	mov	r0,	#0x400
+1:
+	subs	r0,	r0,	#0x1	/* wait for any bubbles to finish */
+	bne	1b
+	ldr	r1,	VAL_ARM_CKCTL
+	ldr	r0,	REG_ARM_CKCTL
+	strh	r1,	[r0]
+
+	/* a few nops to let settle */
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+
+	/* setup DPLL 1 */
+	/* Ramp up the clock to 96Mhz */
+	ldr	r1,	VAL_DPLL1_CTL
+	ldr	r0,	REG_DPLL1_CTL
+	strh	r1,	[r0]
+	ands	r1,	r1,	#0x10	/* Check if PLL is enabled. */
+	beq	lock_end	/* Do not look for lock if BYPASS selected */
+2:
+	ldrh	r1,	[r0]
+	ands	r1,	r1,	#0x01	/*	Check the LOCK bit.*/
+	beq 2b			/*	loop until bit goes hi. */
+lock_end:
+
+
+	/*------------------------------------------------------*
+	 * Turn off the watchdog during init...			*
+ 	 *------------------------------------------------------*/
+	ldr	r0,	REG_WATCHDOG
+	ldr	r1,	WATCHDOG_VAL1
+	str	r1,	[r0]
+	ldr	r1,	WATCHDOG_VAL2
+	str	r1,	[r0]
+	ldr	r0,	REG_WSPRDOG
+	ldr	r1,	WSPRDOG_VAL1
+	str	r1,	[r0]
+	ldr	r0,	REG_WWPSDOG
+
+watch1Wait:
+	ldr	r1,	[r0]
+	tst	r1,	#0x10
+	bne	watch1Wait
+
+	ldr	r0,	REG_WSPRDOG
+	ldr	r1,	WSPRDOG_VAL2
+	str	r1,	[r0]
+	ldr	r0,	REG_WWPSDOG
+watch2Wait:
+	ldr	r1,	[r0]
+	tst	r1,	#0x10
+	bne	watch2Wait
+
+
+
+
+	/* Set memory timings corresponding to the new clock speed */
+
+	/* Check execution location to determine current execution location
+	 * and branch to appropriate initialization code.
+	 */
+	/* Load physical SDRAM base. */
+	mov 	r0, 	#0x10000000
+	/* Get current execution location. */
+	mov 	r1, 	pc
+	/* Compare. */
+	cmp 	r1, 	r0
+	/* Skip over EMIF-fast initialization if running from SDRAM. */
+	bge 	skip_sdram
+
+	/*
+	* Delay for SDRAM initialization.
+	*/
+	mov	r3,	#0x1800		/* value should be checked */
+3:
+	subs	r3,	r3,	#0x1	/* Decrement count */
+	bne 	3b
+
+
+	/*
+	 * Set SDRAM control values. Disable refresh before MRS command.
+	 */
+
+	/* mobile ddr operation */
+	ldr	r0,	REG_SDRAM_OPERATION
+	mov	r2,	#07
+	str	r2,	[r0]
+
+	/* config register */
+	ldr	r0,	REG_SDRAM_CONFIG
+	ldr	r1,	SDRAM_CONFIG_VAL
+	str	r1,	[r0]
+
+	/* manual command register */
+	ldr	r0,	REG_SDRAM_MANUAL_CMD
+	/* issue set cke high */
+	mov	r1,	#CMD_SDRAM_CKE_SET_HIGH
+	str	r1,	[r0]
+	/* issue nop */
+	mov	r1,	#CMD_SDRAM_NOP
+	str	r1,	[r0]
+
+	mov	r2,	#0x0100
+waitMDDR1:
+	subs	r2,	r2,	 #1
+	bne	waitMDDR1	/* delay loop */
+
+	/* issue precharge */
+	mov	r1,	#CMD_SDRAM_PRECHARGE
+	str	r1,	[r0]
+
+	/* issue autorefresh x 2 */
+	mov	r1,	#CMD_SDRAM_AUTOREFRESH
+	str	r1,	[r0]
+	str	r1,	[r0]
+
+	/* mrs register ddr mobile */
+	ldr	r0,	REG_SDRAM_MRS
+	mov	r1,	#0x33
+	str	r1,	[r0]
+
+	/* emrs1 low-power register */
+	ldr	r0,	REG_SDRAM_EMRS1
+	/* self refresh on all banks */
+	mov	r1,	#0
+	str	r1,	[r0]
+
+	ldr	r0,	REG_DLL_URD_CONTROL
+	ldr	r1,	DLL_URD_CONTROL_VAL
+	str	r1,	[r0]
+
+	ldr	r0,	REG_DLL_LRD_CONTROL
+	ldr	r1,	DLL_LRD_CONTROL_VAL
+	str	r1,	[r0]
+
+	ldr	r0,	REG_DLL_WRT_CONTROL
+	ldr	r1,	DLL_WRT_CONTROL_VAL
+	str	r1,	[r0]
+
+	/* delay loop */
+	mov	r2,	#0x0100
+waitMDDR2:
+	subs	r2,	r2,	#1
+	bne	waitMDDR2
+
+	/*
+	 * Delay for SDRAM initialization.
+	 */
+	mov	r3,	#0x1800
+4:
+	subs	r3,	r3,	#1	/* Decrement count. */
+	bne	4b
+	b	common_tc
+
+skip_sdram:
+
+	ldr	r0,	REG_SDRAM_CONFIG
+	ldr	r1,	SDRAM_CONFIG_VAL
+	str	r1,	[r0]
+
+common_tc:
+	/* slow interface */
+	ldr	r1,	VAL_TC_EMIFS_CS0_CONFIG
+	ldr	r0,	REG_TC_EMIFS_CS0_CONFIG
+	str	r1,	[r0] /* Chip Select 0 */
+
+	ldr	r1,	VAL_TC_EMIFS_CS1_CONFIG
+	ldr	r0,	REG_TC_EMIFS_CS1_CONFIG
+	str	r1,	[r0] /* Chip Select 1 */
+	ldr	r1,	VAL_TC_EMIFS_CS3_CONFIG
+	ldr	r0,	REG_TC_EMIFS_CS3_CONFIG
+	str	r1,	[r0] /* Chip Select 3 */
+	/* back to arch calling code */
+	mov	pc,	lr
+
+	/* the literal pools origin */
+	.ltorg
+
+
+REG_TC_EMIFS_CONFIG:		/* 32 bits */
+	.word 0xfffecc0c
+REG_TC_EMIFS_CS0_CONFIG:	/* 32 bits */
+	.word 0xfffecc10
+REG_TC_EMIFS_CS1_CONFIG:	/* 32 bits */
+	.word 0xfffecc14
+REG_TC_EMIFS_CS2_CONFIG:	/* 32 bits */
+	.word 0xfffecc18
+REG_TC_EMIFS_CS3_CONFIG:	/* 32 bits */
+	.word 0xfffecc1c
+
+/* MPU clock/reset/power mode control registers */
+REG_ARM_CKCTL:			/* 16 bits */
+	.word 0xfffece00
+
+REG_ARM_IDLECT3:		/* 16 bits */
+	.word 0xfffece24
+REG_ARM_IDLECT2:		/* 16 bits */
+	.word 0xfffece08        
+REG_ARM_IDLECT1:		/* 16 bits */
+	.word 0xfffece04
+
+REG_ARM_RSTCT2:			/* 16 bits */
+	.word 0xfffece14
+REG_ARM_SYSST:			/* 16 bits */
+	.word 0xfffece18
+/* DPLL control registers */
+REG_DPLL1_CTL:			/* 16 bits */
+	.word 0xfffecf00
+
+/* Watch Dog register */
+/* secure watchdog stop */
+REG_WSPRDOG:
+	.word 0xfffeb048
+/* watchdog write pending */
+REG_WWPSDOG:
+	.word 0xfffeb034 
+
+WSPRDOG_VAL1:
+	.word 0x0000aaaa
+WSPRDOG_VAL2:
+	.word 0x00005555
+
+/* SDRAM config is: auto refresh enabled, 16 bit 4 bank,
+ counter @8192 rows, 10 ns, 8 burst */
+REG_SDRAM_CONFIG:
+	.word 0xfffecc20
+
+/* Operation register */
+REG_SDRAM_OPERATION:
+	.word 0xfffecc80
+
+/* Manual command register */
+REG_SDRAM_MANUAL_CMD:
+	.word 0xfffecc84
+
+/* SDRAM MRS (New) config is: CAS latency is 2, burst length 8 */
+REG_SDRAM_MRS:
+	.word 0xfffecc70
+
+/* SDRAM MRS (New) config is: CAS latency is 2, burst length 8 */
+REG_SDRAM_EMRS1:
+	.word 0xfffecc78
+
+/* WRT DLL register */
+REG_DLL_WRT_CONTROL:
+	.word 0xfffecc68
+DLL_WRT_CONTROL_VAL:
+	.word 0x03f00002
+
+/* URD DLL register */
+REG_DLL_URD_CONTROL:
+	.word 0xfffeccc0
+DLL_URD_CONTROL_VAL:
+	.word 0x00800002
+
+/* LRD DLL register */
+REG_DLL_LRD_CONTROL:
+	.word 0xfffecccc
+
+REG_WATCHDOG:
+	.word 0xfffec808
+
+/* 96 MHz Samsung Mobile DDR */
+SDRAM_CONFIG_VAL:
+	.word 0x001200f4 
+
+DLL_LRD_CONTROL_VAL:
+	.word 0x00800002
+
+VAL_ARM_CKCTL:
+	.word 0x3000
+VAL_DPLL1_CTL:
+	.word 0x2830
+
+VAL_TC_EMIFS_CS0_CONFIG:
+	.word 0x002130b0
+VAL_TC_EMIFS_CS1_CONFIG:
+	.word 0x00001131
+VAL_TC_EMIFS_CS2_CONFIG:
+	.word 0x000055f0
+VAL_TC_EMIFS_CS3_CONFIG:
+	.word 0x88011131
+VAL_TC_EMIFF_SDRAM_CONFIG:
+	.word 0x010290fc
+VAL_TC_EMIFF_MRS:
+	.word 0x00000027
+
+VAL_ARM_IDLECT1:
+	.word 0x00000400
+
+VAL_ARM_IDLECT2:
+	.word 0x00000886
+VAL_ARM_IDLECT3:
+	.word 0x00000015
+
+WATCHDOG_VAL1:
+	.word 0x000000f5
+WATCHDOG_VAL2:
+	.word 0x000000a0
+
+/* command values */
+.equ CMD_SDRAM_NOP,		0x00000000
+.equ CMD_SDRAM_PRECHARGE,	0x00000001
+.equ CMD_SDRAM_AUTOREFRESH,	0x00000002
+.equ CMD_SDRAM_CKE_SET_HIGH,	0x00000007
diff --git a/board/omap1610inn/u-boot.lds b/board/omap1610inn/u-boot.lds
new file mode 100644
index 0000000000..0a4605412e
--- /dev/null
+++ b/board/omap1610inn/u-boot.lds
@@ -0,0 +1,51 @@
+/*
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+	. = 0x00000000;
+	. = ALIGN(4);
+	.text	:
+	{
+	  cpu/arm926ejs/start.o	(.text)
+	  *(.text)
+	}
+	. = ALIGN(4);
+	.rodata : { *(.rodata) }
+	. = ALIGN(4);
+	.data : { *(.data) }
+	. = ALIGN(4);
+	.got : { *(.got) }
+	
+	__u_boot_cmd_start = .;
+	.u_boot_cmd : { *(.u_boot_cmd) }
+	__u_boot_cmd_end = .;
+	
+	armboot_end_data = .;
+	. = ALIGN(4);
+	.bss : { *(.bss) }
+	armboot_end = .;
+}
diff --git a/cpu/arm926ejs/Makefile b/cpu/arm926ejs/Makefile
new file mode 100644
index 0000000000..203278e9cf
--- /dev/null
+++ b/cpu/arm926ejs/Makefile
@@ -0,0 +1,43 @@
+#
+# (C) Copyright 2000-2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(CPU).a
+
+START	= start.o
+OBJS	= interrupts.o cpu.o
+
+all:	.depend $(START) $(LIB)
+
+$(LIB):	$(OBJS)
+	$(AR) crv $@ $(OBJS)
+
+#########################################################################
+
+.depend:	Makefile $(START:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
diff --git a/cpu/arm926ejs/config.mk b/cpu/arm926ejs/config.mk
new file mode 100644
index 0000000000..cef7d26f1c
--- /dev/null
+++ b/cpu/arm926ejs/config.mk
@@ -0,0 +1,27 @@
+#
+# (C) Copyright 2002
+# Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+PLATFORM_RELFLAGS += -fno-strict-aliasing  -fno-common -ffixed-r8 \
+	-mshort-load-bytes -msoft-float
+
+PLATFORM_CPPFLAGS += -mapcs-32 -march=armv4
diff --git a/cpu/arm926ejs/cpu.c b/cpu/arm926ejs/cpu.c
new file mode 100644
index 0000000000..a91aa37828
--- /dev/null
+++ b/cpu/arm926ejs/cpu.c
@@ -0,0 +1,159 @@
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * CPU specific code
+ */
+
+#include <common.h>
+#include <command.h>
+#include <arm926ejs.h>
+
+/* read co-processor 15, register #1 (control register) */
+static unsigned long read_p15_c1 (void)
+{
+	unsigned long value;
+
+	__asm__ __volatile__(
+		"mrc	p15, 0, %0, c1, c0, 0   @ read control reg\n"
+		: "=r" (value)
+		:
+		: "memory");
+
+#ifdef MMU_DEBUG
+	printf ("p15/c1 is = %08lx\n", value);
+#endif
+	return value;
+}
+
+/* write to co-processor 15, register #1 (control register) */
+static void write_p15_c1 (unsigned long value)
+{
+#ifdef MMU_DEBUG
+	printf ("write %08lx to p15/c1\n", value);
+#endif
+	__asm__ __volatile__(
+		"mcr	p15, 0, %0, c1, c0, 0   @ write it back\n"
+		:
+		: "r" (value)
+		: "memory");
+
+	read_p15_c1 ();
+}
+
+static void cp_delay (void)
+{
+	volatile int i;
+
+	/* Many OMAP regs need at least 2 nops  */
+	for (i = 0; i < 100; i++);
+}
+
+/* See also ARM Ref. Man. */
+#define C1_MMU		(1<<0)		/* mmu off/on */
+#define C1_ALIGN	(1<<1)		/* alignment faults off/on */
+#define C1_DC		(1<<2)		/* dcache off/on */
+#define C1_WB		(1<<3)		/* merging write buffer on/off */
+#define C1_BIG_ENDIAN	(1<<7)	/* big endian off/on */
+#define C1_SYS_PROT	(1<<8)		/* system protection */
+#define C1_ROM_PROT	(1<<9)		/* ROM protection */
+#define C1_IC		(1<<12)		/* icache off/on */
+#define C1_HIGH_VECTORS	(1<<13)	/* location of vectors: low/high addresses */
+#define RESERVED_1	(0xf << 3)	/* must be 111b for R/W */
+
+int cpu_init (void)
+{
+	/*
+	 * setup up stack if necessary
+	 */
+#ifdef CONFIG_USE_IRQ
+	IRQ_STACK_START = _armboot_end +
+			CONFIG_STACKSIZE + CONFIG_STACKSIZE_IRQ - 4;
+	FIQ_STACK_START = IRQ_STACK_START + CONFIG_STACKSIZE_FIQ;
+	_armboot_real_end = FIQ_STACK_START + 4;
+#else
+	_armboot_real_end = _armboot_end + CONFIG_STACKSIZE;
+#endif	/* CONFIG_USE_IRQ */
+	return (0);
+}
+
+int cleanup_before_linux (void)
+{
+	/*
+	 * this function is called just before we call linux
+	 * it prepares the processor for linux
+	 *
+	 * we turn off caches etc ...
+	 */
+
+	unsigned long i;
+
+	disable_interrupts ();
+
+	/* turn off I/D-cache */
+	asm ("mrc p15, 0, %0, c1, c0, 0":"=r" (i));
+	i &= ~(C1_DC | C1_IC);
+	asm ("mcr p15, 0, %0, c1, c0, 0": :"r" (i));
+
+	/* flush I/D-cache */
+	i = 0;
+	asm ("mcr p15, 0, %0, c7, c7, 0": :"r" (i));
+	return (0);
+}
+
+int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	extern void reset_cpu (ulong addr);
+
+	disable_interrupts ();
+	reset_cpu (0);
+	/*NOTREACHED*/
+	return (0);
+}
+
+void icache_enable (void)
+{
+	ulong reg;
+
+	reg = read_p15_c1 ();		/* get control reg. */
+	cp_delay ();
+	write_p15_c1 (reg | C1_IC);
+}
+
+void icache_disable (void)
+{
+	ulong reg;
+
+	reg = read_p15_c1 ();
+	cp_delay ();
+	write_p15_c1 (reg & ~C1_IC);
+}
+
+int icache_status (void)
+{
+	return (read_p15_c1 () & C1_IC) != 0;
+}
diff --git a/cpu/arm926ejs/interrupts.c b/cpu/arm926ejs/interrupts.c
new file mode 100644
index 0000000000..c0086dda9b
--- /dev/null
+++ b/cpu/arm926ejs/interrupts.c
@@ -0,0 +1,293 @@
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Alex Zuepke <azu@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <arm925t.h>
+#include <configs/omap1510.h>
+
+#include <asm/proc-armv/ptrace.h>
+
+extern void reset_cpu(ulong addr);
+#define TIMER_LOAD_VAL 0xffffffff
+
+/* macro to read the 32 bit timer */
+#define READ_TIMER (*(volatile ulong *)(CFG_TIMERBASE+8))
+
+#ifdef CONFIG_USE_IRQ
+/* enable IRQ interrupts */
+void enable_interrupts (void)
+{
+	unsigned long temp;
+	__asm__ __volatile__("mrs %0, cpsr\n"
+		"bic %0, %0, #0x80\n"
+		"msr cpsr_c, %0"
+		: "=r" (temp)
+		: "memory");
+}
+
+/*
+ * disable IRQ/FIQ interrupts
+ * returns true if interrupts had been enabled before we disabled them
+ */
+int disable_interrupts (void)
+{
+	unsigned long old,temp;
+	__asm__ __volatile__("mrs %0, cpsr\n"
+		"orr %1, %0, #0xc0\n"
+		"msr cpsr_c, %1"
+		: "=r" (old), "=r" (temp)
+		: "memory");
+	return (old & 0x80) == 0;
+}
+#else
+void enable_interrupts (void)
+{
+	return;
+}
+int disable_interrupts (void)
+{
+	return 0;
+}
+#endif
+
+
+
+void bad_mode (void)
+{
+	panic ("Resetting CPU ...\n");
+	reset_cpu (0);
+}
+
+void show_regs (struct pt_regs *regs)
+{
+	unsigned long flags;
+	const char *processor_modes[] = {
+	"USER_26",	"FIQ_26",	"IRQ_26",	"SVC_26",
+	"UK4_26",	"UK5_26",	"UK6_26",	"UK7_26",
+	"UK8_26",	"UK9_26",	"UK10_26",	"UK11_26",
+	"UK12_26",	"UK13_26",	"UK14_26",	"UK15_26",
+	"USER_32",	"FIQ_32",	"IRQ_32",	"SVC_32",
+	"UK4_32",	"UK5_32",	"UK6_32",	"ABT_32",
+	"UK8_32",	"UK9_32",	"UK10_32",	"UND_32",
+	"UK12_32",	"UK13_32",	"UK14_32",	"SYS_32",
+	};
+
+	flags = condition_codes (regs);
+
+	printf ("pc : [<%08lx>]    lr : [<%08lx>]\n"
+		"sp : %08lx  ip : %08lx  fp : %08lx\n",
+		instruction_pointer (regs),
+		regs->ARM_lr, regs->ARM_sp, regs->ARM_ip, regs->ARM_fp);
+	printf ("r10: %08lx  r9 : %08lx  r8 : %08lx\n",
+		regs->ARM_r10, regs->ARM_r9, regs->ARM_r8);
+	printf ("r7 : %08lx  r6 : %08lx  r5 : %08lx  r4 : %08lx\n",
+		regs->ARM_r7, regs->ARM_r6, regs->ARM_r5, regs->ARM_r4);
+	printf ("r3 : %08lx  r2 : %08lx  r1 : %08lx  r0 : %08lx\n",
+		regs->ARM_r3, regs->ARM_r2, regs->ARM_r1, regs->ARM_r0);
+	printf ("Flags: %c%c%c%c",
+		flags & CC_N_BIT ? 'N' : 'n',
+		flags & CC_Z_BIT ? 'Z' : 'z',
+		flags & CC_C_BIT ? 'C' : 'c', flags & CC_V_BIT ? 'V' : 'v');
+	printf ("  IRQs %s  FIQs %s  Mode %s%s\n",
+		interrupts_enabled (regs) ? "on" : "off",
+		fast_interrupts_enabled (regs) ? "on" : "off",
+		processor_modes[processor_mode (regs)],
+		thumb_mode (regs) ? " (T)" : "");
+}
+
+void do_undefined_instruction (struct pt_regs *pt_regs)
+{
+	printf ("undefined instruction\n");
+	show_regs (pt_regs);
+	bad_mode ();
+}
+
+void do_software_interrupt (struct pt_regs *pt_regs)
+{
+	printf ("software interrupt\n");
+	show_regs (pt_regs);
+	bad_mode ();
+}
+
+void do_prefetch_abort (struct pt_regs *pt_regs)
+{
+	printf ("prefetch abort\n");
+	show_regs (pt_regs);
+	bad_mode ();
+}
+
+void do_data_abort (struct pt_regs *pt_regs)
+{
+	printf ("data abort\n");
+	show_regs (pt_regs);
+	bad_mode ();
+}
+
+void do_not_used (struct pt_regs *pt_regs)
+{
+	printf ("not used\n");
+	show_regs (pt_regs);
+	bad_mode ();
+}
+
+void do_fiq (struct pt_regs *pt_regs)
+{
+	printf ("fast interrupt request\n");
+	show_regs (pt_regs);
+	bad_mode ();
+}
+
+void do_irq (struct pt_regs *pt_regs)
+{
+	printf ("interrupt request\n");
+	show_regs (pt_regs);
+	bad_mode ();
+}
+
+static ulong timestamp;
+static ulong lastdec;
+
+/* nothing really to do with interrupts, just starts up a counter. */
+int interrupt_init (void)
+{
+	int32_t val;
+
+	*((int32_t *) (CFG_TIMERBASE + LOAD_TIM)) = TIMER_LOAD_VAL;
+	val = MPUTIM_ST | MPUTIM_AR | MPUTIM_CLOCK_ENABLE |
+			(CFG_PVT << MPUTIM_PTV_BIT);
+	*((int32_t *) (CFG_TIMERBASE + CNTL_TIMER)) = val;
+	return (0);
+}
+
+/*
+ * timer without interrupts
+ */
+
+void reset_timer (void)
+{
+	reset_timer_masked ();
+}
+
+ulong get_timer (ulong base)
+{
+	return get_timer_masked () - base;
+}
+
+void set_timer (ulong t)
+{
+	timestamp = t;
+}
+
+/* very rough timer... */
+void udelay (unsigned long usec)
+{
+#ifdef CONFIG_INNOVATOROMAP1610
+#define LOOPS_PER_MSEC 100		/* tuned on omap1610 */
+	volatile int i, time_remaining = LOOPS_PER_MSEC * usec;
+
+	for (i = time_remaining; i > 0; i--) {
+	}
+#else
+
+	ulong tmo;
+	tmo = usec / 1000;
+	tmo *= CFG_HZ;
+	tmo /= 1000;
+	tmo += get_timer (0);
+	while (get_timer_masked () < tmo)
+		/*NOP*/;
+#endif
+}
+
+void reset_timer_masked (void)
+{
+	/* reset time */
+	lastdec = READ_TIMER;
+	timestamp = 0;
+}
+
+ulong get_timer_masked (void)
+{
+	ulong now = READ_TIMER;		/* current tick value */
+
+	if (lastdec >= now) {		/* did I roll (rem decrementer) */
+		/* normal mode */
+		/* record amount of time since last check */
+		timestamp += lastdec - now;
+	} else {
+		/* we have an overflow ... */
+		timestamp += lastdec + TIMER_LOAD_VAL - now;
+	}
+	lastdec = now;
+
+	return timestamp;
+}
+
+void udelay_masked (unsigned long usec)
+{
+#ifdef CONFIG_INNOVATOROMAP1610
+	#define LOOPS_PER_MSEC 100 /* tuned on omap1610 */
+	volatile int i, time_remaining = LOOPS_PER_MSEC*usec;
+	for (i=time_remaining; i>0; i--) { }
+#else
+
+	ulong tmo;
+
+	tmo = usec / 1000;
+	tmo *= CFG_HZ;
+	tmo /= 1000;
+
+	reset_timer_masked ();
+
+	while (get_timer_masked () < tmo)
+		/*NOP*/;
+#endif
+}
+
+/*
+ * This function is derived from PowerPC code (read timebase as long long).
+ * On ARM it just returns the timer value.
+ */
+unsigned long long get_ticks(void)
+{
+	return get_timer(0);
+}
+
+/*
+ * This function is derived from PowerPC code (timebase clock frequency).
+ * On ARM it returns the number of timer ticks per second.
+ */
+ulong get_tbclk (void)
+{
+	ulong tbclk;
+	tbclk = CFG_HZ;
+	return tbclk;
+}
diff --git a/cpu/arm926ejs/start.S b/cpu/arm926ejs/start.S
new file mode 100644
index 0000000000..08b2bbcb21
--- /dev/null
+++ b/cpu/arm926ejs/start.S
@@ -0,0 +1,426 @@
+/*
+ *  armboot - Startup Code for ARM926EJS CPU-core
+ *
+ *  Copyright (c) 2003  Texas Instruments
+ *
+ *  ----- Adapted for OMAP1610 from ARM925t code ------
+ *
+ *  Copyright (c) 2001	Marius Gröger <mag@sysgo.de>
+ *  Copyright (c) 2002	Alex Züpke <azu@sysgo.de>
+ *  Copyright (c) 2002	Gary Jennejohn <gj@denx.de>
+ *  Copyright (c) 2003	Richard Woodruff <r-woodruff2@ti.com>
+ *  Copyright (c) 2003	Kshitij <kshitij@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+
+#include <config.h>
+#include <version.h>
+
+#if defined(CONFIG_OMAP1610)
+#include <./configs/omap1510.h>
+#endif
+
+/*
+ *************************************************************************
+ *
+ * Jump vector table as in table 3.1 in [1]
+ *
+ *************************************************************************
+ */
+
+
+.globl _start
+_start:
+	b	reset
+	ldr	pc, _undefined_instruction
+	ldr	pc, _software_interrupt
+	ldr	pc, _prefetch_abort
+	ldr	pc, _data_abort
+	ldr	pc, _not_used
+	ldr	pc, _irq
+	ldr	pc, _fiq
+
+_undefined_instruction:
+	.word undefined_instruction
+_software_interrupt:
+	.word software_interrupt
+_prefetch_abort:
+	.word prefetch_abort
+_data_abort:
+	.word data_abort
+_not_used:
+	.word not_used
+_irq:
+	.word irq
+_fiq:
+	.word fiq
+
+	.balignl 16,0xdeadbeef
+
+
+/*
+ *************************************************************************
+ *
+ * Startup Code (reset vector)
+ *
+ * do important init only if we don't start from memory!
+ * setup Memory and board specific bits prior to relocation.
+ * relocate armboot to ram
+ * setup stack
+ *
+ *************************************************************************
+ */
+
+/*
+ * CFG_MEM_END is in the board dependent config-file (configs/config_BOARD.h)
+ */
+_TEXT_BASE:
+	.word	TEXT_BASE
+
+.globl _armboot_start
+_armboot_start:
+	.word _start
+
+/*
+ * Note: _armboot_end_data and _armboot_end are defined
+ * by the (board-dependent) linker script.
+ * _armboot_end_data is the first usable FLASH address after armboot
+ */
+.globl _armboot_end_data
+_armboot_end_data:
+	.word armboot_end_data
+.globl _armboot_end
+_armboot_end:
+	.word armboot_end
+
+/*
+ * _armboot_real_end is the first usable RAM address behind armboot
+ * and the various stacks
+ */
+.globl _armboot_real_end
+_armboot_real_end:
+	.word 0x0badc0de
+
+#ifdef CONFIG_USE_IRQ
+/* IRQ stack memory (calculated at run-time) */
+.globl IRQ_STACK_START
+IRQ_STACK_START:
+	.word	0x0badc0de
+
+/* IRQ stack memory (calculated at run-time) */
+.globl FIQ_STACK_START
+FIQ_STACK_START:
+	.word 0x0badc0de
+#endif
+
+
+/*
+ * the actual reset code
+ */
+
+reset:
+	/*
+	 * set the cpu to SVC32 mode
+	 */
+	mrs	r0,cpsr
+	bic	r0,r0,#0x1f
+	orr	r0,r0,#0xd3
+	msr	cpsr,r0
+
+
+	/* 
+	 * turn off the watchdog, unlock/diable sequence
+	 */
+	mov	r1, #0xF5
+	ldr	r0, =WDTIM_MODE
+	strh	r1, [r0]
+	mov	r1, #0xA0
+	strh	r1, [r0]
+
+
+
+
+
+	/*
+	 * mask all IRQs by setting all bits in the INTMR - default
+	 */
+
+	mov	r1, #0xffffffff
+	ldr	r0, =REG_IHL1_MIR
+	str	r1, [r0]
+	ldr	r0, =REG_IHL2_MIR
+	str	r1, [r0]
+	bl	cpu_init_crit
+
+relocate:
+	/*
+	 * relocate armboot to RAM
+	 */
+	adr	r0, _start		/* r0 <- current position of code */
+	ldr	r2, _armboot_start
+	ldr	r3, _armboot_end
+	sub	r2, r3, r2		/* r2 <- size of armboot */
+	ldr	r1, _TEXT_BASE		/* r1 <- destination address */
+	add	r2, r0, r2		/* r2 <- source end address */
+
+	/*
+	 * r0 = source address
+	 * r1 = target address
+	 * r2 = source end address
+	 */
+copy_loop:
+	ldmia	r0!, {r3-r10}
+	stmia	r1!, {r3-r10}
+	cmp	r0, r2
+	ble	copy_loop
+
+	/* set up the stack */
+	ldr	r0, _armboot_end
+	add	r0, r0, #CONFIG_STACKSIZE
+	sub	sp, r0, #12		/* leave 3 words for abort-stack */
+
+	ldr	pc, _start_armboot
+
+_start_armboot:
+	.word start_armboot
+
+
+/*
+ *************************************************************************
+ *
+ * CPU_init_critical registers
+ *
+ * setup important registers
+ * setup memory timing
+ *
+ *************************************************************************
+ */
+
+
+cpu_init_crit:
+	/*
+	 * flush v4 I/D caches
+	 */
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c7, 0	/* flush v3/v4 cache */
+	mcr	p15, 0, r0, c8, c7, 0	/* flush v4 TLB */
+
+	/*
+	 * disable MMU stuff and caches
+	 */
+	mrc	p15, 0, r0, c1, c0, 0
+	bic	r0, r0, #0x00002300	/* clear bits 13, 9:8 (--V- --RS) */
+	bic	r0, r0, #0x00000087	/* clear bits 7, 2:0 (B--- -CAM) */
+	orr	r0, r0, #0x00000002	/* set bit 2 (A) Align */
+	orr	r0, r0, #0x00001000	/* set bit 12 (I) I-Cache */
+	mcr	p15, 0, r0, c1, c0, 0
+
+	/*
+	 * Go setup Memory and board specific bits prior to relocation.
+	 */
+	mov	ip, lr		/* perserve link reg across call */
+	bl	platformsetup	/* go setup pll,mux,memory */
+	mov	lr, ip		/* restore link */
+	mov	pc, lr		/* back to my caller */
+/*
+ *************************************************************************
+ *
+ * Interrupt handling
+ *
+ *************************************************************************
+ */
+
+@
+@ IRQ stack frame.
+@
+#define S_FRAME_SIZE	72
+
+#define S_OLD_R0	68
+#define S_PSR		64
+#define S_PC		60
+#define S_LR		56
+#define S_SP		52
+
+#define S_IP		48
+#define S_FP		44
+#define S_R10		40
+#define S_R9		36
+#define S_R8		32
+#define S_R7		28
+#define S_R6		24
+#define S_R5		20
+#define S_R4		16
+#define S_R3		12
+#define S_R2		8
+#define S_R1		4
+#define S_R0		0
+
+#define MODE_SVC 0x13
+#define I_BIT	 0x80
+
+/*
+ * use bad_save_user_regs for abort/prefetch/undef/swi ...
+ * use irq_save_user_regs / irq_restore_user_regs for IRQ/FIQ handling
+ */
+
+	.macro	bad_save_user_regs
+	@ carve out a frame on current user stack
+	sub	sp, sp, #S_FRAME_SIZE
+	stmia	sp, {r0 - r12}	@ Save user registers (now in svc mode) r0-r12
+	ldr	r2, _armboot_end	@ find top of stack
+	add	r2, r2, #CONFIG_STACKSIZE	@ find base of normal stack
+	sub	r2, r2, #8	@ set base 2 words into abort stack
+	@ get values for "aborted" pc and cpsr (into parm regs)
+	ldmia	r2, {r2 - r3}
+	add	r0, sp, #S_FRAME_SIZE		@ grab pointer to old stack
+	add	r5, sp, #S_SP
+	mov	r1, lr
+	stmia	r5, {r0 - r3}	@ save sp_SVC, lr_SVC, pc, cpsr
+	mov	r0, sp		@ save current stack into r0 (param register)
+	.endm
+
+	.macro	irq_save_user_regs
+	sub	sp, sp, #S_FRAME_SIZE
+	stmia	sp, {r0 - r12}			@ Calling r0-r12
+	@ !!!! R8 NEEDS to be saved !!!! a reserved stack spot would be good.
+	add	r8, sp, #S_PC
+	stmdb	r8, {sp, lr}^		@ Calling SP, LR
+	str	lr, [r8, #0]		@ Save calling PC
+	mrs	r6, spsr
+	str	r6, [r8, #4]		@ Save CPSR
+	str	r0, [r8, #8]		@ Save OLD_R0
+	mov	r0, sp
+	.endm
+
+	.macro	irq_restore_user_regs
+	ldmia	sp, {r0 - lr}^			@ Calling r0 - lr
+	mov	r0, r0
+	ldr	lr, [sp, #S_PC]			@ Get PC
+	add	sp, sp, #S_FRAME_SIZE
+	subs	pc, lr, #4		@ return & move spsr_svc into cpsr
+	.endm
+
+	.macro get_bad_stack
+	@ get bottom of stack (into sp by by user stack pointer).
+	ldr	r13, _armboot_end
+	@ head to reserved words at the top of the stack
+	add	r13, r13, #CONFIG_STACKSIZE
+	sub	r13, r13, #8	@ reserved a couple spots in abort stack
+
+	str	lr, [r13]	@ save caller lr in position 0 of saved stack
+	mrs	lr, spsr	@ get the spsr
+	str	lr, [r13, #4]	@ save spsr in position 1 of saved stack
+	mov	r13, #MODE_SVC	@ prepare SVC-Mode
+	@ msr	spsr_c, r13
+	msr	spsr, r13	@ switch modes, make sure moves will execute
+	mov	lr, pc		@ capture return pc
+	movs	pc, lr		@ jump to next instruction & switch modes.
+	.endm
+
+	.macro get_irq_stack			@ setup IRQ stack
+	ldr	sp, IRQ_STACK_START
+	.endm
+
+	.macro get_fiq_stack			@ setup FIQ stack
+	ldr	sp, FIQ_STACK_START
+	.endm
+
+/*
+ * exception handlers
+ */
+	.align  5
+undefined_instruction:
+	get_bad_stack
+	bad_save_user_regs
+	bl	do_undefined_instruction
+
+	.align	5
+software_interrupt:
+	get_bad_stack
+	bad_save_user_regs
+	bl	do_software_interrupt
+
+	.align	5
+prefetch_abort:
+	get_bad_stack
+	bad_save_user_regs
+	bl	do_prefetch_abort
+
+	.align	5
+data_abort:
+	get_bad_stack
+	bad_save_user_regs
+	bl	do_data_abort
+
+	.align	5
+not_used:
+	get_bad_stack
+	bad_save_user_regs
+	bl	do_not_used
+
+#ifdef CONFIG_USE_IRQ
+
+	.align	5
+irq:
+	get_irq_stack
+	irq_save_user_regs
+	bl 	do_irq
+	irq_restore_user_regs
+
+	.align	5
+fiq:
+	get_fiq_stack
+	/* someone ought to write a more effiction fiq_save_user_regs */
+	irq_save_user_regs
+	bl 	do_fiq
+	irq_restore_user_regs
+
+#else
+
+	.align	5
+irq:
+	get_bad_stack
+	bad_save_user_regs
+	bl	do_irq
+
+	.align	5
+fiq:
+	get_bad_stack
+	bad_save_user_regs
+	bl	do_fiq
+
+#endif
+
+	.align	5
+.globl reset_cpu
+reset_cpu:
+	ldr	r1, rstctl1	/* get clkm1 reset ctl */
+	mov	r3, #0x0	
+	strh	r3, [r1]	/* clear it */
+	mov	r3, #0x8
+	strh	r3, [r1]	/* force dsp+arm reset */
+_loop_forever:
+	b	_loop_forever
+
+
+rstctl1:
+	.word	0xfffece10
diff --git a/drivers/ns16550.c b/drivers/ns16550.c
index b20ae4b2d5..a7aa40ff32 100644
--- a/drivers/ns16550.c
+++ b/drivers/ns16550.c
@@ -26,10 +26,9 @@ void NS16550_init (NS16550_t com_port, int baud_divisor)
 	com_port->lcr = LCRVAL;
 	com_port->mcr = MCRVAL;
 	com_port->fcr = FCRVAL;
-#ifdef CONFIG_OMAP1510
-	com_port->mdr1 = 0; /* select uart mode */
+#if defined(CONFIG_OMAP1510) || defined(CONFIG_OMAP1610)
+	com_port->mdr1 = 0;	/* select uart mode */
 #endif
-
 }
 
 void NS16550_reinit (NS16550_t com_port, int baud_divisor)
diff --git a/drivers/serial.c b/drivers/serial.c
index 44875e5ae1..f5b51d6b7c 100644
--- a/drivers/serial.c
+++ b/drivers/serial.c
@@ -52,6 +52,12 @@ static int calc_divisor (void)
 		return (1);				/* return 1 for base divisor */
 	}
 	console->osc_12m_sel = 0;			/* clear if previsouly set */
+#endif
+#ifdef CONFIG_OMAP1610
+	/* If can't cleanly clock 115200 set div to 1 */
+	if ((CFG_NS16550_CLK == 48000000) && (gd->baudrate == 115200)) {
+		return (26);		/* return 26 for base divisor */
+	}
 #endif
 	return (CFG_NS16550_CLK / 16 / gd->baudrate);
 }
diff --git a/include/arm926ejs.h b/include/arm926ejs.h
new file mode 100644
index 0000000000..c660265b7a
--- /dev/null
+++ b/include/arm926ejs.h
@@ -0,0 +1,8 @@
+/************************************************
+ * NAME                 arm926ejs.h             *
+ * Version      :       23 June 2003            *
+ ************************************************/
+/* Currently empty */
+#ifndef __ARM926EJS_H__
+#define __ARM926EJS_H__
+#endif /*__ARM926EJS_H__*/
diff --git a/include/asm-arm/arch-arm926ejs/sizes.h b/include/asm-arm/arch-arm926ejs/sizes.h
new file mode 100644
index 0000000000..ef0b99b946
--- /dev/null
+++ b/include/asm-arm/arch-arm926ejs/sizes.h
@@ -0,0 +1,51 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA0 2111-1307
+ * USA
+ */
+/* DO NOT EDIT!! - this file automatically generated
+ *		   from .s file by awk -f s2h.awk
+ */
+/*  Size defintions
+ *  Copyright (C) ARM Limited 1998. All rights reserved.
+ */
+
+#ifndef __sizes_h
+#define __sizes_h			1
+
+/* handy sizes */
+#define SZ_1K		0x00000400
+#define SZ_4K		0x00001000
+#define SZ_8K		0x00002000
+#define SZ_16K		0x00004000
+#define SZ_64K		0x00010000
+#define SZ_128K	0x00020000
+#define SZ_256K	0x00040000
+#define SZ_512K	0x00080000
+
+#define SZ_1M		0x00100000
+#define SZ_2M		0x00200000
+#define SZ_4M		0x00400000
+#define SZ_8M		0x00800000
+#define SZ_16M		0x01000000
+#define SZ_32M		0x02000000
+#define SZ_64M		0x04000000
+#define SZ_128M	0x08000000
+#define SZ_256M	0x10000000
+#define SZ_512M	0x20000000
+
+#define SZ_1G		0x40000000
+#define SZ_2G		0x80000000
+
+#endif	/* __sizes_h */
diff --git a/include/configs/omap1510.h b/include/configs/omap1510.h
index 540630b593..dfcb3672f2 100644
--- a/include/configs/omap1510.h
+++ b/include/configs/omap1510.h
@@ -175,6 +175,18 @@
 
 #define MOD_CONF_CTRL_0		0xfffe1080
 
+#ifdef CONFIG_OMAP1610 /* 1610 Configuration Register */
+
+#define USB_OTG_CTRL			0xFFFB040C
+#define USB_TRANSCEIVER_CTRL	0xFFFE1064
+#define PULL_DWN_CTRL_4	0xFFFE10AC
+#define PU_PD_SEL_0		0xFFFE10B4
+#define PU_PD_SEL_1		0xFFFE10B8
+#define PU_PD_SEL_2		0xFFFE10BC
+#define PU_PD_SEL_3		0xFFFE10C0
+#define PU_PD_SEL_4		0xFFFE10C4
+
+#endif
 /*
  * Traffic Controller Memory Interface Registers
  */
@@ -521,6 +533,7 @@ typedef struct {
 #define WDTIM_CONTROL_ST	BIT7
 
 
+
 /* ---------------------------------------------------------------------------
  *  Differentiating processor versions for those who care.
  * ---------------------------------------------------------------------------
diff --git a/include/configs/omap1610inn.h b/include/configs/omap1610inn.h
new file mode 100644
index 0000000000..55fad43a44
--- /dev/null
+++ b/include/configs/omap1610inn.h
@@ -0,0 +1,169 @@
+/*
+ * (C) Copyright 2003
+ * Texas Instruments.
+ * Kshitij Gupta <kshitij@ti.com>
+ * Configuation settings for the TI OMAP Innovator board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#define CONFIG_ARM926EJS	1	/* This is an arm926ejs CPU core  */
+#define CONFIG_OMAP	1			/* in a TI OMAP core    */
+#define CONFIG_OMAP1610	1		/* which is in a 1610  */
+#define CONFIG_INNOVATOROMAP1610	1	/*  a Innovator Board  */
+
+/* input clock of PLL */
+/* the OMAP1610 Innovator has 12MHz input clock */
+#define CONFIG_SYS_CLK_FREQ	12000000
+
+#undef CONFIG_USE_IRQ	/* we don't need IRQ/FIQ stuff */
+
+#define CONFIG_MISC_INIT_R
+
+#define CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs  */
+#define CONFIG_SETUP_MEMORY_TAGS	1
+
+/*
+ * Size of malloc() pool
+ */
+#define CFG_MALLOC_LEN	(CFG_ENV_SIZE + 128*1024)
+
+/*
+ * Hardware drivers
+ */
+/*
+*/
+#define CONFIG_DRIVER_LAN91C96
+#define CONFIG_LAN91C96_BASE 0x04000300
+#define CONFIG_LAN91C96_EXT_PHY
+
+/*
+ * NS16550 Configuration
+ */
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE	(-4)
+#define CFG_NS16550_CLK	(48000000)	/* can be 12M/32Khz or 48Mhz */
+#define CFG_NS16550_COM1	0xfffb0000	/* uart1, bluetooth uart 
+						on helen */
+
+/*
+ * select serial console configuration
+ */
+#define CONFIG_SERIAL1	1	/* we use SERIAL 1 on OMAP1610 Innovator */
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_CONS_INDEX	1
+#define CONFIG_BAUDRATE	115200
+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+
+#define CONFIG_COMMANDS	(CONFIG_CMD_DFL | CFG_CMD_DHCP)
+#define CONFIG_BOOTP_MASK	CONFIG_BOOTP_DEFAULT
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+#include <configs/omap1510.h>
+
+#define CONFIG_BOOTDELAY	3
+#define CONFIG_BOOTARGS	"mem=32M console=ttyS0,115200n8 noinitrd \
+				root=/dev/nfs rw nfsroot=157.87.82.48:\
+				/home/a0875451/mwd/myfs/target ip=dhcp"
+#define CONFIG_NETMASK	255.255.254.0	/* talk on MY local net */
+#define CONFIG_IPADDR	156.117.97.156	/* static IP I currently own */
+#define CONFIG_SERVERIP	156.117.97.139	/* current IP of my dev pc */
+#define CONFIG_BOOTFILE	"uImage"	/* file to load */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE	115200	/* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX	1	/* which serial port to use */
+#endif
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP	/* undef to save memory     */
+#define CFG_PROMPT	"OMAP1610 Innovator # "	/* Monitor Command Prompt   */
+#define CFG_CBSIZE	256		/* Console I/O Buffer Size  */
+/* Print Buffer Size */
+#define CFG_PBSIZE	(CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
+#define CFG_MAXARGS	16		/* max number of command args   */
+#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size    */
+
+#define CFG_MEMTEST_START	0x10000000	/* memtest works on */
+#define CFG_MEMTEST_END	0x12000000	/* 32 MB in DRAM    */
+
+#undef	CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
+
+#define CFG_LOAD_ADDR	0x10000000	/* default load address */
+
+/* The 1610 has 6 timers, they can be driven by the RefClk (12Mhz) or by 
+ * DPLL1. This time is further subdivided by a local divisor.
+ */
+#define CFG_TIMERBASE	0xFFFEC500	/* use timer 1 */
+#define CFG_PVT	7	/* 2^(pvt+1), divide by 256 */
+#define CFG_HZ	((CONFIG_SYS_CLK_FREQ)/(2 << CFG_PVT))
+
+/*-----------------------------------------------------------------------
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE	(128*1024)	/* regular stack */
+#ifdef CONFIG_USE_IRQ
+#define CONFIG_STACKSIZE_IRQ	(4*1024)	/* IRQ stack */
+#define CONFIG_STACKSIZE_FIQ	(4*1024)	/* FIQ stack */
+#endif
+
+/*-----------------------------------------------------------------------
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS	1	/* we have 1 bank of DRAM */
+#define PHYS_SDRAM_1	0x10000000	/* SDRAM Bank #1 */
+#define PHYS_SDRAM_1_SIZE	0x02000000	/* 32 MB */
+
+#define PHYS_FLASH_1	0x00000000	/* Flash Bank #1 */
+
+#define CFG_FLASH_BASE	PHYS_FLASH_1
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
+#define PHYS_FLASH_SIZE	0x02000000	/* 32MB */
+#define CFG_MAX_FLASH_SECT	(259)	/* max number of sectors on one chip */
+/* addr of environment */
+#define CFG_ENV_ADDR	(CFG_FLASH_BASE + 0x020000)
+
+/* timeout values are in ticks */
+#define CFG_FLASH_ERASE_TOUT	(20*CFG_HZ)	/* Timeout for Flash Erase */
+#define CFG_FLASH_WRITE_TOUT	(20*CFG_HZ)	/* Timeout for Flash Write */
+
+#define CFG_ENV_IS_IN_FLASH	1
+#define CFG_ENV_SIZE	0x20000	/* Total Size of Environment Sector */
+#define CFG_ENV_OFFSET	0x20000	/* environment starts here  */
+
+#endif							/* __CONFIG_H */
diff --git a/include/flash.h b/include/flash.h
index 4cd467aaa3..e93b86ec21 100644
--- a/include/flash.h
+++ b/include/flash.h
@@ -213,6 +213,7 @@ extern int flash_real_protect(flash_info_t *info, long sector, int prot);
 #define INTEL_ID_28F320J3A  0x00160016	/*  32M = 128K x  32	*/
 #define INTEL_ID_28F640J3A  0x00170017	/*  64M = 128K x  64	*/
 #define INTEL_ID_28F128J3A  0x00180018	/* 128M = 128K x 128	*/
+#define INTEL_ID_28F256L18T 0x880D880D	/* 256M = 128K x 255 + 32k x 4 */
 
 #define INTEL_ID_28F160S3   0x00D000D0	/*  16M = 512K x  32 (64kB x 32)	*/
 #define INTEL_ID_28F320S3   0x00D400D4	/*  32M = 512K x  64 (64kB x 64)	*/
@@ -319,6 +320,8 @@ extern int flash_real_protect(flash_info_t *info, long sector, int prot);
 #define FLASH_AMLV320U	0x00A2		/* AMD 29LV128M    ( 128M = 8M x 16 )	*/
 #define FLASH_AMLV640U	0x00A4		/* AMD 29LV640M    ( 64M = 4M x 16 )	*/
 #define FLASH_AMLV128U	0x00A6		/* AMD 29LV128M	   ( 128M = 8M x 16 )	*/
+/* Intel 28F256L18T 256M = 128K x 255 + 32k x 4	*/
+#define FLASH_28F256L18T 0x00A8
 
 #define FLASH_UNKNOWN	0xFFFF		/* unknown flash type			*/
 
diff --git a/include/ns16550.h b/include/ns16550.h
index dff4165e87..4dd39fee32 100644
--- a/include/ns16550.h
+++ b/include/ns16550.h
@@ -60,8 +60,10 @@ struct NS16550 {
 	int pad7:24;
 	unsigned char scr;		/* 7 */
 	int pad8:24;
-#ifdef CONFIG_OMAP1510
+#if defined(CONFIG_OMAP1510) || defined(CONFIG_OMAP1610)
 	unsigned char mdr1;		/* mode select reset TL16C750*/
+#endif
+#ifdef CONFIG_OMAP1510
 	int pad9:24;
 	unsigned long pad[10];
 	unsigned char osc_12m_sel;
-- 
2.39.5