From 6f8b8593d63bc9781435270a54b6f7d245eecd8e Mon Sep 17 00:00:00 2001 From: David Brownell Date: Tue, 16 Mar 2010 14:12:00 -0700 Subject: [PATCH] ADIv5 transport support moves to separate files Unclutter arm_adi_v5.c by moving most transport-specific code to a transport-specific files adi_v5_{jtag,swd}.c ... it's not a full cleanup, because of some issues which need to be addressed as part of SWD support (along with implementing the DAP operations on top of SWD transport): - The mess where mem_ap_read_buf_u32() is currently coded to know about JTAG scan chains, and thus needs rewriting before it will work with SWD; - Initialization is still JTAG-specific Also move JTAG_{DP,ACK}_* constants from adi_v5.h to the JTAG file; no other code should care about those values. Signed-off-by: David Brownell --- src/target/Makefile.am | 2 + src/target/adi_v5_jtag.c | 481 +++++++++++++++++++++++++++++++++++++++ src/target/adi_v5_swd.c | 92 ++++++++ src/target/arm_adi_v5.c | 434 +---------------------------------- src/target/arm_adi_v5.h | 10 +- 5 files changed, 589 insertions(+), 430 deletions(-) create mode 100644 src/target/adi_v5_jtag.c create mode 100644 src/target/adi_v5_swd.c diff --git a/src/target/Makefile.am b/src/target/Makefile.am index ad0ff7c0..ea6d88fc 100644 --- a/src/target/Makefile.am +++ b/src/target/Makefile.am @@ -83,6 +83,8 @@ ARM_DEBUG_SRC = \ arm_simulator.c \ arm_semihosting.c \ arm_adi_v5.c \ + adi_v5_jtag.c \ + adi_v5_swd.c \ embeddedice.c \ trace.c \ etb.c \ diff --git a/src/target/adi_v5_jtag.c b/src/target/adi_v5_jtag.c new file mode 100644 index 00000000..eac83b7b --- /dev/null +++ b/src/target/adi_v5_jtag.c @@ -0,0 +1,481 @@ +/*************************************************************************** + * Copyright (C) 2006 by Magnus Lundin + * lundin@mlu.mine.nu + * + * Copyright (C) 2008 by Spencer Oliver + * spen@spen-soft.co.uk + * + * Copyright (C) 2009 by Oyvind Harboe + * oyvind.harboe@zylin.com + * + * Copyright (C) 2009-2010 by David Brownell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + ***************************************************************************/ + +/** + * @file + * This file implements JTAG transport support for cores implementing + the ARM Debug Interface version 5 (ADIv5). + */ + +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + +#include "arm.h" +#include "arm_adi_v5.h" +#include + + +/* JTAG instructions/registers for JTAG-DP and SWJ-DP */ +#define JTAG_DP_ABORT 0x8 +#define JTAG_DP_DPACC 0xA +#define JTAG_DP_APACC 0xB +#define JTAG_DP_IDCODE 0xE + +/* three-bit ACK values for DPACC and APACC reads */ +#define JTAG_ACK_OK_FAULT 0x2 +#define JTAG_ACK_WAIT 0x1 + +/*************************************************************************** + * + * DPACC and APACC scanchain access through JTAG-DP (or SWJ-DP) + * +***************************************************************************/ + +/** + * Scan DPACC or APACC using target ordered uint8_t buffers. No endianness + * conversions are performed. See section 4.4.3 of the ADIv5 spec, which + * discusses operations which access these registers. + * + * Note that only one scan is performed. If RnW is set, a separate scan + * will be needed to collect the data which was read; the "invalue" collects + * the posted result of a preceding operation, not the current one. + * + * @param swjdp the DAP + * @param instr JTAG_DP_APACC (AP access) or JTAG_DP_DPACC (DP access) + * @param reg_addr two significant bits; A[3:2]; for APACC access, the + * SELECT register has more addressing bits. + * @param RnW false iff outvalue will be written to the DP or AP + * @param outvalue points to a 32-bit (little-endian) integer + * @param invalue NULL, or points to a 32-bit (little-endian) integer + * @param ack points to where the three bit JTAG_ACK_* code will be stored + */ + +/* FIXME don't export ... this is a temporary workaround for the + * mem_ap_read_buf_u32() mess, until it's no longer JTAG-specific. + */ +int adi_jtag_dp_scan(struct adiv5_dap *swjdp, + uint8_t instr, uint8_t reg_addr, uint8_t RnW, + uint8_t *outvalue, uint8_t *invalue, uint8_t *ack) +{ + struct arm_jtag *jtag_info = swjdp->jtag_info; + struct scan_field fields[2]; + uint8_t out_addr_buf; + + jtag_set_end_state(TAP_IDLE); + arm_jtag_set_instr(jtag_info, instr, NULL); + + /* Scan out a read or write operation using some DP or AP register. + * For APACC access with any sticky error flag set, this is discarded. + */ + fields[0].num_bits = 3; + buf_set_u32(&out_addr_buf, 0, 3, ((reg_addr >> 1) & 0x6) | (RnW & 0x1)); + fields[0].out_value = &out_addr_buf; + fields[0].in_value = ack; + + /* NOTE: if we receive JTAG_ACK_WAIT, the previous operation did not + * complete; data we write is discarded, data we read is unpredictable. + * When overrun detect is active, STICKYORUN is set. + */ + + fields[1].num_bits = 32; + fields[1].out_value = outvalue; + fields[1].in_value = invalue; + + jtag_add_dr_scan(jtag_info->tap, 2, fields, jtag_get_end_state()); + + /* Add specified number of tck clocks after starting memory bus + * access, giving the hardware time to complete the access. + * They provide more time for the (MEM) AP to complete the read ... + * See "Minimum Response Time" for JTAG-DP, in the ADIv5 spec. + */ + if ((instr == JTAG_DP_APACC) + && ((reg_addr == AP_REG_DRW) + || ((reg_addr & 0xF0) == AP_REG_BD0)) + && (swjdp->memaccess_tck != 0)) + jtag_add_runtest(swjdp->memaccess_tck, + jtag_set_end_state(TAP_IDLE)); + + return jtag_get_error(); +} + +/** + * Scan DPACC or APACC out and in from host ordered uint32_t buffers. + * This is exactly like adi_jtag_dp_scan(), except that endianness + * conversions are performed (so the types of invalue and outvalue + * must be different). + */ +static int adi_jtag_dp_scan_u32(struct adiv5_dap *swjdp, + uint8_t instr, uint8_t reg_addr, uint8_t RnW, + uint32_t outvalue, uint32_t *invalue, uint8_t *ack) +{ + uint8_t out_value_buf[4]; + int retval; + + buf_set_u32(out_value_buf, 0, 32, outvalue); + + retval = adi_jtag_dp_scan(swjdp, instr, reg_addr, RnW, + out_value_buf, (uint8_t *)invalue, ack); + if (retval != ERROR_OK) + return retval; + + if (invalue) + jtag_add_callback(arm_le_to_h_u32, + (jtag_callback_data_t) invalue); + + return retval; +} + +/** + * Utility to write AP registers. + */ +static inline int adi_jtag_ap_write_check(struct adiv5_dap *dap, + uint8_t reg_addr, uint8_t *outvalue) +{ + return adi_jtag_dp_scan(dap, JTAG_DP_APACC, reg_addr, DPAP_WRITE, + outvalue, NULL, NULL); +} + +static int adi_jtag_scan_inout_check_u32(struct adiv5_dap *swjdp, + uint8_t instr, uint8_t reg_addr, uint8_t RnW, + uint32_t outvalue, uint32_t *invalue) +{ + int retval; + + /* Issue the read or write */ + retval = adi_jtag_dp_scan_u32(swjdp, instr, reg_addr, + RnW, outvalue, NULL, NULL); + if (retval != ERROR_OK) + return retval; + + /* For reads, collect posted value; RDBUFF has no other effect. + * Assumes read gets acked with OK/FAULT, and CTRL_STAT says "OK". + */ + if ((RnW == DPAP_READ) && (invalue != NULL)) + retval = adi_jtag_dp_scan_u32(swjdp, JTAG_DP_DPACC, + DP_RDBUFF, DPAP_READ, 0, invalue, &swjdp->ack); + return retval; +} + +static int jtagdp_transaction_endcheck(struct adiv5_dap *swjdp) +{ + int retval; + uint32_t ctrlstat; + + /* too expensive to call keep_alive() here */ + +#if 0 + /* Danger!!!! BROKEN!!!! */ + adi_jtag_scan_inout_check_u32(swjdp, JTAG_DP_DPACC, + DP_CTRL_STAT, DPAP_READ, 0, &ctrlstat); + /* Danger!!!! BROKEN!!!! Why will jtag_execute_queue() fail here???? + R956 introduced the check on return value here and now Michael Schwingen reports + that this code no longer works.... + + https://lists.berlios.de/pipermail/openocd-development/2008-September/003107.html + */ + if ((retval = jtag_execute_queue()) != ERROR_OK) + { + LOG_ERROR("BUG: Why does this fail the first time????"); + } + /* Why??? second time it works??? */ +#endif + + /* Post CTRL/STAT read; discard any previous posted read value + * but collect its ACK status. + */ + adi_jtag_scan_inout_check_u32(swjdp, JTAG_DP_DPACC, + DP_CTRL_STAT, DPAP_READ, 0, &ctrlstat); + if ((retval = jtag_execute_queue()) != ERROR_OK) + return retval; + + swjdp->ack = swjdp->ack & 0x7; + + /* common code path avoids calling timeval_ms() */ + if (swjdp->ack != JTAG_ACK_OK_FAULT) + { + long long then = timeval_ms(); + + while (swjdp->ack != JTAG_ACK_OK_FAULT) + { + if (swjdp->ack == JTAG_ACK_WAIT) + { + if ((timeval_ms()-then) > 1000) + { + /* NOTE: this would be a good spot + * to use JTAG_DP_ABORT. + */ + LOG_WARNING("Timeout (1000ms) waiting " + "for ACK=OK/FAULT " + "in JTAG-DP transaction"); + return ERROR_JTAG_DEVICE_ERROR; + } + } + else + { + LOG_WARNING("Invalid ACK %#x " + "in JTAG-DP transaction", + swjdp->ack); + return ERROR_JTAG_DEVICE_ERROR; + } + + adi_jtag_scan_inout_check_u32(swjdp, JTAG_DP_DPACC, + DP_CTRL_STAT, DPAP_READ, 0, &ctrlstat); + if ((retval = dap_run(swjdp)) != ERROR_OK) + return retval; + swjdp->ack = swjdp->ack & 0x7; + } + } + + /* REVISIT also STICKYCMP, for pushed comparisons (nyet used) */ + + /* Check for STICKYERR and STICKYORUN */ + if (ctrlstat & (SSTICKYORUN | SSTICKYERR)) + { + LOG_DEBUG("jtag-dp: CTRL/STAT error, 0x%" PRIx32, ctrlstat); + /* Check power to debug regions */ + if ((ctrlstat & 0xf0000000) != 0xf0000000) + ahbap_debugport_init(swjdp); + else + { + uint32_t mem_ap_csw, mem_ap_tar; + + /* Maybe print information about last intended + * MEM-AP access; but not if autoincrementing. + * *Real* CSW and TAR values are always shown. + */ + if (swjdp->ap_tar_value != (uint32_t) -1) + LOG_DEBUG("MEM-AP Cached values: " + "ap_bank 0x%" PRIx32 + ", ap_csw 0x%" PRIx32 + ", ap_tar 0x%" PRIx32, + swjdp->ap_bank_value, + swjdp->ap_csw_value, + swjdp->ap_tar_value); + + if (ctrlstat & SSTICKYORUN) + LOG_ERROR("JTAG-DP OVERRUN - check clock, " + "memaccess, or reduce jtag speed"); + + if (ctrlstat & SSTICKYERR) + LOG_ERROR("JTAG-DP STICKY ERROR"); + + /* Clear Sticky Error Bits */ + adi_jtag_scan_inout_check_u32(swjdp, JTAG_DP_DPACC, + DP_CTRL_STAT, DPAP_WRITE, + swjdp->dp_ctrl_stat | SSTICKYORUN + | SSTICKYERR, NULL); + adi_jtag_scan_inout_check_u32(swjdp, JTAG_DP_DPACC, + DP_CTRL_STAT, DPAP_READ, 0, &ctrlstat); + if ((retval = dap_run(swjdp)) != ERROR_OK) + return retval; + + LOG_DEBUG("jtag-dp: CTRL/STAT 0x%" PRIx32, ctrlstat); + + retval = dap_queue_ap_read(swjdp, + AP_REG_CSW, &mem_ap_csw); + if (retval != ERROR_OK) + return retval; + + retval = dap_queue_ap_read(swjdp, + AP_REG_TAR, &mem_ap_tar); + if (retval != ERROR_OK) + return retval; + + if ((retval = dap_run(swjdp)) != ERROR_OK) + return retval; + LOG_ERROR("MEM_AP_CSW 0x%" PRIx32 ", MEM_AP_TAR 0x%" + PRIx32, mem_ap_csw, mem_ap_tar); + + } + if ((retval = dap_run(swjdp)) != ERROR_OK) + return retval; + return ERROR_JTAG_DEVICE_ERROR; + } + + return ERROR_OK; +} + +/*--------------------------------------------------------------------------*/ + +static int jtag_idcode_q_read(struct adiv5_dap *dap, + uint8_t *ack, uint32_t *data) +{ + struct arm_jtag *jtag_info = dap->jtag_info; + int retval; + struct scan_field fields[1]; + + jtag_set_end_state(TAP_IDLE); + + /* This is a standard JTAG operation -- no DAP tweakage */ + retval = arm_jtag_set_instr(jtag_info, JTAG_DP_IDCODE, NULL); + if (retval != ERROR_OK) + return retval; + + fields[0].num_bits = 32; + fields[0].out_value = NULL; + fields[0].in_value = (void *) data; + + jtag_add_dr_scan(jtag_info->tap, 1, fields, jtag_get_end_state()); + retval = jtag_get_error(); + if (retval != ERROR_OK) + return retval; + + jtag_add_callback(arm_le_to_h_u32, + (jtag_callback_data_t) data); + + return retval; +} + +static int jtag_dp_q_read(struct adiv5_dap *dap, unsigned reg, + uint32_t *data) +{ + return adi_jtag_scan_inout_check_u32(dap, JTAG_DP_DPACC, + reg, DPAP_READ, 0, data); +} + +static int jtag_dp_q_write(struct adiv5_dap *dap, unsigned reg, + uint32_t data) +{ + return adi_jtag_scan_inout_check_u32(dap, JTAG_DP_DPACC, + reg, DPAP_WRITE, data, NULL); +} + +/** Select the AP register bank matching bits 7:4 of reg. */ +static int jtag_ap_q_bankselect(struct adiv5_dap *dap, unsigned reg) +{ + uint32_t select = reg & 0x000000F0; + + if (select == dap->ap_bank_value) + return ERROR_OK; + dap->ap_bank_value = select; + + select |= dap->apsel; + + return jtag_dp_q_write(dap, DP_SELECT, select); +} + +static int jtag_ap_q_read(struct adiv5_dap *dap, unsigned reg, + uint32_t *data) +{ + int retval = jtag_ap_q_bankselect(dap, reg); + + if (retval != ERROR_OK) + return retval; + + return adi_jtag_scan_inout_check_u32(dap, JTAG_DP_APACC, reg, + DPAP_READ, 0, data); +} + +static int jtag_ap_q_write(struct adiv5_dap *dap, unsigned reg, + uint32_t data) +{ + uint8_t out_value_buf[4]; + + int retval = jtag_ap_q_bankselect(dap, reg); + if (retval != ERROR_OK) + return retval; + + buf_set_u32(out_value_buf, 0, 32, data); + + return adi_jtag_ap_write_check(dap, reg, out_value_buf); +} + +static int jtag_ap_q_abort(struct adiv5_dap *dap, uint8_t *ack) +{ + /* for JTAG, this is the only valid ABORT register operation */ + return adi_jtag_dp_scan_u32(dap, JTAG_DP_ABORT, + 0, DPAP_WRITE, 1, NULL, ack); +} + +static int jtag_dp_run(struct adiv5_dap *dap) +{ + return jtagdp_transaction_endcheck(dap); +} + +/* FIXME don't export ... just initialize as + * part of DAP setup +*/ +const struct dap_ops jtag_dp_ops = { + .queue_idcode_read = jtag_idcode_q_read, + .queue_dp_read = jtag_dp_q_read, + .queue_dp_write = jtag_dp_q_write, + .queue_ap_read = jtag_ap_q_read, + .queue_ap_write = jtag_ap_q_write, + .queue_ap_abort = jtag_ap_q_abort, + .run = jtag_dp_run, +}; + + +const uint8_t swd2jtag_bitseq[] = { + /* More than 50 TCK/SWCLK cycles with TMS/SWDIO high, + * putting both JTAG and SWD logic into reset state. + */ + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + /* Switching equence disables SWD and enables JTAG + * NOTE: bits in the DP's IDCODE can expose the need for + * the old/deprecated sequence (0xae 0xde). + */ + 0x3c, 0xe7, + /* At least 50 TCK/SWCLK cycles with TMS/SWDIO high, + * putting both JTAG and SWD logic into reset state. + * NOTE: some docs say "at least 5". + */ + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, +}; + +/** Put the debug link into JTAG mode, if the target supports it. + * The link's initial mode may be either SWD or JTAG. + * + * @param target Enters JTAG mode (if possible). + * + * Note that targets implemented with SW-DP do not support JTAG, and + * that some targets which could otherwise support it may have been + * configured to disable JTAG signaling + * + * @return ERROR_OK or else a fault code. + */ +int dap_to_jtag(struct target *target) +{ + int retval; + + LOG_DEBUG("Enter JTAG mode"); + + /* REVISIT it's nasty to need to make calls to a "jtag" + * subsystem if the link isn't in JTAG mode... + */ + + retval = jtag_add_tms_seq(8 * sizeof(swd2jtag_bitseq), + swd2jtag_bitseq, TAP_RESET); + if (retval == ERROR_OK) + retval = jtag_execute_queue(); + + /* REVISIT set up the DAP's ops vector for JTAG mode. */ + + return retval; +} diff --git a/src/target/adi_v5_swd.c b/src/target/adi_v5_swd.c new file mode 100644 index 00000000..f103e4b0 --- /dev/null +++ b/src/target/adi_v5_swd.c @@ -0,0 +1,92 @@ +/*************************************************************************** + * + * Copyright (C) 2010 by David Brownell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + ***************************************************************************/ + +/** + * @file + * This file implements SWD transport support for cores implementing + the ARM Debug Interface version 5 (ADIv5). + */ + +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + +#include "arm.h" +#include "arm_adi_v5.h" +#include + +/* + * This represents the bits which must be sent out on TMS/SWDIO to + * switch a DAP implemented using an SWJ-DP module into SWD mode. + * These bits are stored (and transmitted) LSB-first. + * + * See the DAP-Lite specification, section 2.2.5 for information + * about making the debug link select SWD or JTAG. (Similar info + * is in a few other ARM documents.) + */ +static const uint8_t jtag2swd_bitseq[] = { + /* More than 50 TCK/SWCLK cycles with TMS/SWDIO high, + * putting both JTAG and SWD logic into reset state. + */ + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + /* Switching sequence enables SWD and disables JTAG + * NOTE: bits in the DP's IDCODE may expose the need for + * an old/deprecated sequence (0xb6 0xed). + */ + 0x9e, 0xe7, + /* More than 50 TCK/SWCLK cycles with TMS/SWDIO high, + * putting both JTAG and SWD logic into reset state. + */ + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, +}; + +/** + * Put the debug link into SWD mode, if the target supports it. + * The link's initial mode may be either JTAG (for example, + * with SWJ-DP after reset) or SWD. + * + * @param target Enters SWD mode (if possible). + * + * Note that targets using the JTAG-DP do not support SWD, and that + * some targets which could otherwise support it may have have been + * configured to disable SWD signaling + * + * @return ERROR_OK or else a fault code. + */ +int dap_to_swd(struct target *target) +{ + int retval; + + LOG_DEBUG("Enter SWD mode"); + + /* REVISIT it's nasty to need to make calls to a "jtag" + * subsystem if the link isn't in JTAG mode... + */ + + retval = jtag_add_tms_seq(8 * sizeof(jtag2swd_bitseq), + jtag2swd_bitseq, TAP_INVALID); + if (retval == ERROR_OK) + retval = jtag_execute_queue(); + + /* REVISIT set up the DAP's ops vector for SWD mode. */ + + return retval; +} + diff --git a/src/target/arm_adi_v5.c b/src/target/arm_adi_v5.c index 61cf9892..dcad0fbc 100644 --- a/src/target/arm_adi_v5.c +++ b/src/target/arm_adi_v5.c @@ -85,272 +85,6 @@ static uint32_t max_tar_block_size(uint32_t tar_autoincr_block, uint32_t address return (tar_autoincr_block - ((tar_autoincr_block - 1) & address)) >> 2; } -/*************************************************************************** - * * - * DPACC and APACC scanchain access through JTAG-DP * - * * -***************************************************************************/ - -/** - * Scan DPACC or APACC using target ordered uint8_t buffers. No endianness - * conversions are performed. See section 4.4.3 of the ADIv5 spec, which - * discusses operations which access these registers. - * - * Note that only one scan is performed. If RnW is set, a separate scan - * will be needed to collect the data which was read; the "invalue" collects - * the posted result of a preceding operation, not the current one. - * - * @param swjdp the DAP - * @param instr JTAG_DP_APACC (AP access) or JTAG_DP_DPACC (DP access) - * @param reg_addr two significant bits; A[3:2]; for APACC access, the - * SELECT register has more addressing bits. - * @param RnW false iff outvalue will be written to the DP or AP - * @param outvalue points to a 32-bit (little-endian) integer - * @param invalue NULL, or points to a 32-bit (little-endian) integer - * @param ack points to where the three bit JTAG_ACK_* code will be stored - */ -static int adi_jtag_dp_scan(struct adiv5_dap *swjdp, - uint8_t instr, uint8_t reg_addr, uint8_t RnW, - uint8_t *outvalue, uint8_t *invalue, uint8_t *ack) -{ - struct arm_jtag *jtag_info = swjdp->jtag_info; - struct scan_field fields[2]; - uint8_t out_addr_buf; - - jtag_set_end_state(TAP_IDLE); - arm_jtag_set_instr(jtag_info, instr, NULL); - - /* Scan out a read or write operation using some DP or AP register. - * For APACC access with any sticky error flag set, this is discarded. - */ - fields[0].num_bits = 3; - buf_set_u32(&out_addr_buf, 0, 3, ((reg_addr >> 1) & 0x6) | (RnW & 0x1)); - fields[0].out_value = &out_addr_buf; - fields[0].in_value = ack; - - /* NOTE: if we receive JTAG_ACK_WAIT, the previous operation did not - * complete; data we write is discarded, data we read is unpredictable. - * When overrun detect is active, STICKYORUN is set. - */ - - fields[1].num_bits = 32; - fields[1].out_value = outvalue; - fields[1].in_value = invalue; - - jtag_add_dr_scan(jtag_info->tap, 2, fields, jtag_get_end_state()); - - /* Add specified number of tck clocks after starting memory bus - * access, giving the hardware time to complete the access. - * They provide more time for the (MEM) AP to complete the read ... - * See "Minimum Response Time" for JTAG-DP, in the ADIv5 spec. - */ - if ((instr == JTAG_DP_APACC) - && ((reg_addr == AP_REG_DRW) - || ((reg_addr & 0xF0) == AP_REG_BD0)) - && (swjdp->memaccess_tck != 0)) - jtag_add_runtest(swjdp->memaccess_tck, - jtag_set_end_state(TAP_IDLE)); - - return jtag_get_error(); -} - -/** - * Scan DPACC or APACC out and in from host ordered uint32_t buffers. - * This is exactly like adi_jtag_dp_scan(), except that endianness - * conversions are performed (so the types of invalue and outvalue - * must be different). - */ -static int adi_jtag_dp_scan_u32(struct adiv5_dap *swjdp, - uint8_t instr, uint8_t reg_addr, uint8_t RnW, - uint32_t outvalue, uint32_t *invalue, uint8_t *ack) -{ - uint8_t out_value_buf[4]; - int retval; - - buf_set_u32(out_value_buf, 0, 32, outvalue); - - retval = adi_jtag_dp_scan(swjdp, instr, reg_addr, RnW, - out_value_buf, (uint8_t *)invalue, ack); - if (retval != ERROR_OK) - return retval; - - if (invalue) - jtag_add_callback(arm_le_to_h_u32, - (jtag_callback_data_t) invalue); - - return retval; -} - -/** - * Utility to write AP registers. - */ -static inline int adi_jtag_ap_write_check(struct adiv5_dap *dap, - uint8_t reg_addr, uint8_t *outvalue) -{ - return adi_jtag_dp_scan(dap, JTAG_DP_APACC, reg_addr, DPAP_WRITE, - outvalue, NULL, NULL); -} - -static int adi_jtag_scan_inout_check_u32(struct adiv5_dap *swjdp, - uint8_t instr, uint8_t reg_addr, uint8_t RnW, - uint32_t outvalue, uint32_t *invalue) -{ - int retval; - - /* Issue the read or write */ - retval = adi_jtag_dp_scan_u32(swjdp, instr, reg_addr, - RnW, outvalue, NULL, NULL); - if (retval != ERROR_OK) - return retval; - - /* For reads, collect posted value; RDBUFF has no other effect. - * Assumes read gets acked with OK/FAULT, and CTRL_STAT says "OK". - */ - if ((RnW == DPAP_READ) && (invalue != NULL)) - retval = adi_jtag_dp_scan_u32(swjdp, JTAG_DP_DPACC, - DP_RDBUFF, DPAP_READ, 0, invalue, &swjdp->ack); - return retval; -} - -static int jtagdp_transaction_endcheck(struct adiv5_dap *swjdp) -{ - int retval; - uint32_t ctrlstat; - - /* too expensive to call keep_alive() here */ - -#if 0 - /* Danger!!!! BROKEN!!!! */ - adi_jtag_scan_inout_check_u32(swjdp, JTAG_DP_DPACC, - DP_CTRL_STAT, DPAP_READ, 0, &ctrlstat); - /* Danger!!!! BROKEN!!!! Why will jtag_execute_queue() fail here???? - R956 introduced the check on return value here and now Michael Schwingen reports - that this code no longer works.... - - https://lists.berlios.de/pipermail/openocd-development/2008-September/003107.html - */ - if ((retval = jtag_execute_queue()) != ERROR_OK) - { - LOG_ERROR("BUG: Why does this fail the first time????"); - } - /* Why??? second time it works??? */ -#endif - - /* Post CTRL/STAT read; discard any previous posted read value - * but collect its ACK status. - */ - adi_jtag_scan_inout_check_u32(swjdp, JTAG_DP_DPACC, - DP_CTRL_STAT, DPAP_READ, 0, &ctrlstat); - if ((retval = jtag_execute_queue()) != ERROR_OK) - return retval; - - swjdp->ack = swjdp->ack & 0x7; - - /* common code path avoids calling timeval_ms() */ - if (swjdp->ack != JTAG_ACK_OK_FAULT) - { - long long then = timeval_ms(); - - while (swjdp->ack != JTAG_ACK_OK_FAULT) - { - if (swjdp->ack == JTAG_ACK_WAIT) - { - if ((timeval_ms()-then) > 1000) - { - /* NOTE: this would be a good spot - * to use JTAG_DP_ABORT. - */ - LOG_WARNING("Timeout (1000ms) waiting " - "for ACK=OK/FAULT " - "in JTAG-DP transaction"); - return ERROR_JTAG_DEVICE_ERROR; - } - } - else - { - LOG_WARNING("Invalid ACK %#x " - "in JTAG-DP transaction", - swjdp->ack); - return ERROR_JTAG_DEVICE_ERROR; - } - - adi_jtag_scan_inout_check_u32(swjdp, JTAG_DP_DPACC, - DP_CTRL_STAT, DPAP_READ, 0, &ctrlstat); - if ((retval = dap_run(swjdp)) != ERROR_OK) - return retval; - swjdp->ack = swjdp->ack & 0x7; - } - } - - /* REVISIT also STICKYCMP, for pushed comparisons (nyet used) */ - - /* Check for STICKYERR and STICKYORUN */ - if (ctrlstat & (SSTICKYORUN | SSTICKYERR)) - { - LOG_DEBUG("jtag-dp: CTRL/STAT error, 0x%" PRIx32, ctrlstat); - /* Check power to debug regions */ - if ((ctrlstat & 0xf0000000) != 0xf0000000) - ahbap_debugport_init(swjdp); - else - { - uint32_t mem_ap_csw, mem_ap_tar; - - /* Maybe print information about last intended - * MEM-AP access; but not if autoincrementing. - * *Real* CSW and TAR values are always shown. - */ - if (swjdp->ap_tar_value != (uint32_t) -1) - LOG_DEBUG("MEM-AP Cached values: " - "ap_bank 0x%" PRIx32 - ", ap_csw 0x%" PRIx32 - ", ap_tar 0x%" PRIx32, - swjdp->ap_bank_value, - swjdp->ap_csw_value, - swjdp->ap_tar_value); - - if (ctrlstat & SSTICKYORUN) - LOG_ERROR("JTAG-DP OVERRUN - check clock, " - "memaccess, or reduce jtag speed"); - - if (ctrlstat & SSTICKYERR) - LOG_ERROR("JTAG-DP STICKY ERROR"); - - /* Clear Sticky Error Bits */ - adi_jtag_scan_inout_check_u32(swjdp, JTAG_DP_DPACC, - DP_CTRL_STAT, DPAP_WRITE, - swjdp->dp_ctrl_stat | SSTICKYORUN - | SSTICKYERR, NULL); - adi_jtag_scan_inout_check_u32(swjdp, JTAG_DP_DPACC, - DP_CTRL_STAT, DPAP_READ, 0, &ctrlstat); - if ((retval = dap_run(swjdp)) != ERROR_OK) - return retval; - - LOG_DEBUG("jtag-dp: CTRL/STAT 0x%" PRIx32, ctrlstat); - - retval = dap_queue_ap_read(swjdp, - AP_REG_CSW, &mem_ap_csw); - if (retval != ERROR_OK) - return retval; - - retval = dap_queue_ap_read(swjdp, - AP_REG_TAR, &mem_ap_tar); - if (retval != ERROR_OK) - return retval; - - if ((retval = dap_run(swjdp)) != ERROR_OK) - return retval; - LOG_ERROR("MEM_AP_CSW 0x%" PRIx32 ", MEM_AP_TAR 0x%" - PRIx32, mem_ap_csw, mem_ap_tar); - - } - if ((retval = dap_run(swjdp)) != ERROR_OK) - return retval; - return ERROR_JTAG_DEVICE_ERROR; - } - - return ERROR_OK; -} - /*************************************************************************** * * * DP and MEM-AP register access through APACC and DPACC * @@ -818,6 +552,13 @@ int mem_ap_write_buf_u8(struct adiv5_dap *swjdp, uint8_t *buffer, int count, uin return retval; } +/* FIXME don't import ... this is a temporary workaround for the + * mem_ap_read_buf_u32() mess, until it's no longer JTAG-specific. + */ +extern int adi_jtag_dp_scan(struct adiv5_dap *swjdp, + uint8_t instr, uint8_t reg_addr, uint8_t RnW, + uint8_t *outvalue, uint8_t *invalue, uint8_t *ack); + /** * Synchronously read a block of 32-bit words into a buffer * @param swjdp The DAP connected to the MEM-AP. @@ -1116,110 +857,11 @@ int mem_ap_read_buf_u8(struct adiv5_dap *swjdp, uint8_t *buffer, /*--------------------------------------------------------------------------*/ -static int jtag_idcode_q_read(struct adiv5_dap *dap, - uint8_t *ack, uint32_t *data) -{ - struct arm_jtag *jtag_info = dap->jtag_info; - int retval; - struct scan_field fields[1]; - - jtag_set_end_state(TAP_IDLE); - - /* This is a standard JTAG operation -- no DAP tweakage */ - retval = arm_jtag_set_instr(jtag_info, JTAG_DP_IDCODE, NULL); - if (retval != ERROR_OK) - return retval; - - fields[0].num_bits = 32; - fields[0].out_value = NULL; - fields[0].in_value = (void *) data; - - jtag_add_dr_scan(jtag_info->tap, 1, fields, jtag_get_end_state()); - retval = jtag_get_error(); - if (retval != ERROR_OK) - return retval; - - jtag_add_callback(arm_le_to_h_u32, - (jtag_callback_data_t) data); - - return retval; -} - -static int jtag_dp_q_read(struct adiv5_dap *dap, unsigned reg, - uint32_t *data) -{ - return adi_jtag_scan_inout_check_u32(dap, JTAG_DP_DPACC, - reg, DPAP_READ, 0, data); -} - -static int jtag_dp_q_write(struct adiv5_dap *dap, unsigned reg, - uint32_t data) -{ - return adi_jtag_scan_inout_check_u32(dap, JTAG_DP_DPACC, - reg, DPAP_WRITE, data, NULL); -} - -/** Select the AP register bank matching bits 7:4 of reg. */ -static int jtag_ap_q_bankselect(struct adiv5_dap *dap, unsigned reg) -{ - uint32_t select = reg & 0x000000F0; - - if (select == dap->ap_bank_value) - return ERROR_OK; - dap->ap_bank_value = select; - - select |= dap->apsel; - - return jtag_dp_q_write(dap, DP_SELECT, select); -} - -static int jtag_ap_q_read(struct adiv5_dap *dap, unsigned reg, - uint32_t *data) -{ - int retval = jtag_ap_q_bankselect(dap, reg); - - if (retval != ERROR_OK) - return retval; - - return adi_jtag_scan_inout_check_u32(dap, JTAG_DP_APACC, reg, - DPAP_READ, 0, data); -} - -static int jtag_ap_q_write(struct adiv5_dap *dap, unsigned reg, - uint32_t data) -{ - uint8_t out_value_buf[4]; - - int retval = jtag_ap_q_bankselect(dap, reg); - if (retval != ERROR_OK) - return retval; - buf_set_u32(out_value_buf, 0, 32, data); - - return adi_jtag_ap_write_check(dap, reg, out_value_buf); -} - -static int jtag_ap_q_abort(struct adiv5_dap *dap, uint8_t *ack) -{ - /* for JTAG, this is the only valid ABORT register operation */ - return adi_jtag_dp_scan_u32(dap, JTAG_DP_ABORT, - 0, DPAP_WRITE, 1, NULL, ack); -} - -static int jtag_dp_run(struct adiv5_dap *dap) -{ - return jtagdp_transaction_endcheck(dap); -} - -static const struct dap_ops jtag_dp_ops = { - .queue_idcode_read = jtag_idcode_q_read, - .queue_dp_read = jtag_dp_q_read, - .queue_dp_write = jtag_dp_q_write, - .queue_ap_read = jtag_ap_q_read, - .queue_ap_write = jtag_ap_q_write, - .queue_ap_abort = jtag_ap_q_abort, - .run = jtag_dp_run, -}; +/* FIXME don't import ... just initialize as + * part of DAP transport setup +*/ +extern const struct dap_ops jtag_dp_ops; /*--------------------------------------------------------------------------*/ @@ -1988,57 +1630,3 @@ int dap_to_swd(struct target *target) return retval; } -/** - * This represents the bits which must be sent out on TMS/SWDIO to - * switch a DAP implemented using an SWJ-DP module into JTAG mode. - * These bits are stored (and transmitted) LSB-first. - * - * These bits are stored (and transmitted) LSB-first. - */ -static const uint8_t swd2jtag_bitseq[] = { - /* More than 50 TCK/SWCLK cycles with TMS/SWDIO high, - * putting both JTAG and SWD logic into reset state. - */ - 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, - /* Switching equence disables SWD and enables JTAG - * NOTE: bits in the DP's IDCODE can expose the need for - * the old/deprecated sequence (0xae 0xde). - */ - 0x3c, 0xe7, - /* At least 50 TCK/SWCLK cycles with TMS/SWDIO high, - * putting both JTAG and SWD logic into reset state. - * NOTE: some docs say "at least 5". - */ - 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, -}; - -/** Put the debug link into JTAG mode, if the target supports it. - * The link's initial mode may be either SWD or JTAG. - * - * @param target Enters JTAG mode (if possible). - * - * Note that targets implemented with SW-DP do not support JTAG, and - * that some targets which could otherwise support it may have been - * configured to disable JTAG signaling - * - * @return ERROR_OK or else a fault code. - */ -int dap_to_jtag(struct target *target) -{ - int retval; - - LOG_DEBUG("Enter JTAG mode"); - - /* REVISIT it's nasty to need to make calls to a "jtag" - * subsystem if the link isn't in JTAG mode... - */ - - retval = jtag_add_tms_seq(8 * sizeof(swd2jtag_bitseq), - swd2jtag_bitseq, TAP_RESET); - if (retval == ERROR_OK) - retval = jtag_execute_queue(); - - /* REVISIT set up the DAP's ops vector for JTAG mode. */ - - return retval; -} diff --git a/src/target/arm_adi_v5.h b/src/target/arm_adi_v5.h index d207fd9c..4ee36ff1 100644 --- a/src/target/arm_adi_v5.h +++ b/src/target/arm_adi_v5.h @@ -32,15 +32,11 @@ #include "arm_jtag.h" -/* JTAG instructions/registers for JTAG-DP and SWJ-DP */ -#define JTAG_DP_ABORT 0x8 +/* FIXME remove these JTAG-specific decls when mem_ap_read_buf_u32() + * is no longer JTAG-specific + */ #define JTAG_DP_DPACC 0xA #define JTAG_DP_APACC 0xB -#define JTAG_DP_IDCODE 0xE - -/* three-bit ACK values for DPACC and APACC reads */ -#define JTAG_ACK_OK_FAULT 0x2 -#define JTAG_ACK_WAIT 0x1 /* three-bit ACK values for SWD access (sent LSB first) */ #define SWD_ACK_OK 0x4 -- 2.39.5