From 70205e5a6ddc8528b11db9eb4d3fa0209d9fce2a Mon Sep 17 00:00:00 2001 From: Haiying Wang Date: Tue, 30 May 2006 08:51:19 -0500 Subject: [PATCH] Fix two SDRAM setup bugs. Fix ECC setup bug. Enable 1T/2T based on number of DIMMs present. Signed-off-by: Haiying Wang --- cpu/mpc86xx/spd_sdram.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/cpu/mpc86xx/spd_sdram.c b/cpu/mpc86xx/spd_sdram.c index 130c8fc396..f30bbbd7e2 100644 --- a/cpu/mpc86xx/spd_sdram.c +++ b/cpu/mpc86xx/spd_sdram.c @@ -1088,24 +1088,24 @@ unsigned int enable_ddr(unsigned int ddr_num) * If the user wanted ECC (enabled via sdram_cfg[2]) */ if (config == 0x02) { + ddr->err_disable = 0x00000000; + asm("sync;isync;"); + ddr->err_sbe = 0x00ff0000; + ddr->err_int_en = 0x0000000d; sdram_cfg_1 |= 0x20000000; /* ECC_EN */ } #endif /* - * REV1 uses 1T timing. - * REV2 may use 1T or 2T as configured by the user. + * Set 1T or 2T timing based on 1 or 2 modules */ { - uint pvr = get_pvr(); - - if (pvr != PVR_85xx_REV1) { -#if defined(CONFIG_DDR_2T_TIMING) + if (!(no_dimm1 || no_dimm2)) { /* + * 2T timing,because both DIMMS are present. * Enable 2T timing by setting sdram_cfg[16]. */ sdram_cfg_1 |= 0x8000; /* 2T_EN */ -#endif } } -- 2.39.5