From 70997d88c40b4d74c4eac80c85f3a2676aa15d82 Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Wed, 5 Apr 2017 16:23:36 -0600 Subject: [PATCH] arm: rpi: Add a file to handle messages The bcm283x chips provide a way for the ARM core to communicate with the graphics processor, which is in charge of many things. This is handled by way of a message prototcol. At present the code for sending message (and receiving a reply) is spread around U-Boot, primarily in the board file. This means that sending a message from a driver requires duplicating the code. Create a new message implementation with a function to support powering on a subsystem as a starting point. Signed-off-by: Simon Glass --- arch/arm/mach-bcm283x/Makefile | 2 +- arch/arm/mach-bcm283x/include/mach/msg.h | 18 +++++++++++ arch/arm/mach-bcm283x/msg.c | 39 ++++++++++++++++++++++++ board/raspberrypi/rpi/rpi.c | 35 ++------------------- 4 files changed, 61 insertions(+), 33 deletions(-) create mode 100644 arch/arm/mach-bcm283x/include/mach/msg.h create mode 100644 arch/arm/mach-bcm283x/msg.c diff --git a/arch/arm/mach-bcm283x/Makefile b/arch/arm/mach-bcm283x/Makefile index 5cb1b2fe94..b5f606ef0b 100644 --- a/arch/arm/mach-bcm283x/Makefile +++ b/arch/arm/mach-bcm283x/Makefile @@ -5,4 +5,4 @@ # obj-$(CONFIG_BCM2835) += lowlevel_init.o -obj-y += init.o reset.o mbox.o phys2bus.o +obj-y += init.o reset.o mbox.o msg.o phys2bus.o diff --git a/arch/arm/mach-bcm283x/include/mach/msg.h b/arch/arm/mach-bcm283x/include/mach/msg.h new file mode 100644 index 0000000000..3bcb5db3e6 --- /dev/null +++ b/arch/arm/mach-bcm283x/include/mach/msg.h @@ -0,0 +1,18 @@ +/* + * (C) Copyright 2012,2015 Stephen Warren + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _BCM2835_MSG_H +#define _BCM2835_MSG_H + +/** + * bcm2835_power_on_module() - power on an SoC module + * + * @module: ID of module to power on (BCM2835_MBOX_POWER_DEVID_...) + * @return 0 if OK, -EIO on error + */ +int bcm2835_power_on_module(u32 module); + +#endif diff --git a/arch/arm/mach-bcm283x/msg.c b/arch/arm/mach-bcm283x/msg.c new file mode 100644 index 0000000000..08b1beaa53 --- /dev/null +++ b/arch/arm/mach-bcm283x/msg.c @@ -0,0 +1,39 @@ +/* + * (C) Copyright 2012 Stephen Warren + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include + +struct msg_set_power_state { + struct bcm2835_mbox_hdr hdr; + struct bcm2835_mbox_tag_set_power_state set_power_state; + u32 end_tag; +}; + +int bcm2835_power_on_module(u32 module) +{ + ALLOC_CACHE_ALIGN_BUFFER(struct msg_set_power_state, msg_pwr, 1); + int ret; + + BCM2835_MBOX_INIT_HDR(msg_pwr); + BCM2835_MBOX_INIT_TAG(&msg_pwr->set_power_state, + SET_POWER_STATE); + msg_pwr->set_power_state.body.req.device_id = module; + msg_pwr->set_power_state.body.req.state = + BCM2835_MBOX_SET_POWER_STATE_REQ_ON | + BCM2835_MBOX_SET_POWER_STATE_REQ_WAIT; + + ret = bcm2835_mbox_call_prop(BCM2835_MBOX_PROP_CHAN, + &msg_pwr->hdr); + if (ret) { + printf("bcm2835: Could not set module %u power state\n", + module); + return -EIO; + } + + return 0; +} diff --git a/board/raspberrypi/rpi/rpi.c b/board/raspberrypi/rpi/rpi.c index 2146534b36..d0d9a9739d 100644 --- a/board/raspberrypi/rpi/rpi.c +++ b/board/raspberrypi/rpi/rpi.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include #include @@ -53,12 +54,6 @@ struct msg_get_mac_address { u32 end_tag; }; -struct msg_set_power_state { - struct bcm2835_mbox_hdr hdr; - struct bcm2835_mbox_tag_set_power_state set_power_state; - u32 end_tag; -}; - struct msg_get_clock_rate { struct bcm2835_mbox_hdr hdr; struct bcm2835_mbox_tag_get_clock_rate get_clock_rate; @@ -365,30 +360,6 @@ int misc_init_r(void) return 0; } -static int power_on_module(u32 module) -{ - ALLOC_CACHE_ALIGN_BUFFER(struct msg_set_power_state, msg_pwr, 1); - int ret; - - BCM2835_MBOX_INIT_HDR(msg_pwr); - BCM2835_MBOX_INIT_TAG(&msg_pwr->set_power_state, - SET_POWER_STATE); - msg_pwr->set_power_state.body.req.device_id = module; - msg_pwr->set_power_state.body.req.state = - BCM2835_MBOX_SET_POWER_STATE_REQ_ON | - BCM2835_MBOX_SET_POWER_STATE_REQ_WAIT; - - ret = bcm2835_mbox_call_prop(BCM2835_MBOX_PROP_CHAN, - &msg_pwr->hdr); - if (ret) { - printf("bcm2835: Could not set module %u power state\n", - module); - return -1; - } - - return 0; -} - static void get_board_rev(void) { ALLOC_CACHE_ALIGN_BUFFER(struct msg_get_board_rev, msg, 1); @@ -492,7 +463,7 @@ int board_init(void) gd->bd->bi_boot_params = 0x100; - return power_on_module(BCM2835_MBOX_POWER_DEVID_USB_HCD); + return bcm2835_power_on_module(BCM2835_MBOX_POWER_DEVID_USB_HCD); } int board_mmc_init(bd_t *bis) @@ -500,7 +471,7 @@ int board_mmc_init(bd_t *bis) ALLOC_CACHE_ALIGN_BUFFER(struct msg_get_clock_rate, msg_clk, 1); int ret; - power_on_module(BCM2835_MBOX_POWER_DEVID_SDHCI); + bcm2835_power_on_module(BCM2835_MBOX_POWER_DEVID_SDHCI); BCM2835_MBOX_INIT_HDR(msg_clk); BCM2835_MBOX_INIT_TAG(&msg_clk->get_clock_rate, GET_CLOCK_RATE); -- 2.39.5