From 712f99a5ddc404f8c6eac481cfe19f82ca2ecb4f Mon Sep 17 00:00:00 2001 From: Vikas Manocha Date: Sun, 12 Feb 2017 10:25:45 -0800 Subject: [PATCH] clk: stm32f7: add clock driver for stm32f7 family add basic clock driver support for stm32f7 to enable clocks required by the peripherals. Signed-off-by: Vikas Manocha Reviewed-by: Simon Glass --- arch/arm/mach-stm32/stm32f7/Makefile | 2 +- arch/arm/mach-stm32/stm32f7/soc.c | 2 - configs/stm32f746-disco_defconfig | 1 + .../clock/st,stm32-rcc.txt | 95 +++++++++++++++++++ drivers/clk/Makefile | 2 +- .../clock.c => drivers/clk/clk_stm32f7.c | 61 +++++++++++- 6 files changed, 157 insertions(+), 6 deletions(-) create mode 100644 doc/device-tree-bindings/clock/st,stm32-rcc.txt rename arch/arm/mach-stm32/stm32f7/clock.c => drivers/clk/clk_stm32f7.c (86%) diff --git a/arch/arm/mach-stm32/stm32f7/Makefile b/arch/arm/mach-stm32/stm32f7/Makefile index 643d4d919c..03269bd461 100644 --- a/arch/arm/mach-stm32/stm32f7/Makefile +++ b/arch/arm/mach-stm32/stm32f7/Makefile @@ -5,4 +5,4 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-y += timer.o clock.o soc.o +obj-y += timer.o soc.o diff --git a/arch/arm/mach-stm32/stm32f7/soc.c b/arch/arm/mach-stm32/stm32f7/soc.c index 8baee99a4f..06af631cc1 100644 --- a/arch/arm/mach-stm32/stm32f7/soc.c +++ b/arch/arm/mach-stm32/stm32f7/soc.c @@ -17,8 +17,6 @@ u32 get_cpu_rev(void) int arch_cpu_init(void) { - configure_clocks(); - /* * Configure the memory protection unit (MPU) * 0x00000000 - 0xffffffff: Strong-order, Shareable diff --git a/configs/stm32f746-disco_defconfig b/configs/stm32f746-disco_defconfig index f638ca0924..8fcab9db75 100644 --- a/configs/stm32f746-disco_defconfig +++ b/configs/stm32f746-disco_defconfig @@ -39,3 +39,4 @@ CONFIG_DM_SPI=y CONFIG_STM32_QSPI=y CONFIG_OF_LIBFDT_OVERLAY=y # CONFIG_EFI_LOADER is not set +CONFIG_CLK=y diff --git a/doc/device-tree-bindings/clock/st,stm32-rcc.txt b/doc/device-tree-bindings/clock/st,stm32-rcc.txt new file mode 100644 index 0000000000..0532d815da --- /dev/null +++ b/doc/device-tree-bindings/clock/st,stm32-rcc.txt @@ -0,0 +1,95 @@ +STMicroelectronics STM32 Reset and Clock Controller +=================================================== + +The RCC IP is both a reset and a clock controller. + +Please refer to clock-bindings.txt for common clock controller binding usage. +Please also refer to reset.txt for common reset controller binding usage. + +Required properties: +- compatible: Should be: + "st,stm32f42xx-rcc" + "st,stm32f469-rcc" +- reg: should be register base and length as documented in the + datasheet +- #reset-cells: 1, see below +- #clock-cells: 2, device nodes should specify the clock in their "clocks" + property, containing a phandle to the clock device node, an index selecting + between gated clocks and other clocks and an index specifying the clock to + use. + +Example: + + rcc: rcc@40023800 { + #reset-cells = <1>; + #clock-cells = <2> + compatible = "st,stm32f42xx-rcc", "st,stm32-rcc"; + reg = <0x40023800 0x400>; + }; + +Specifying gated clocks +======================= + +The primary index must be set to 0. + +The secondary index is the bit number within the RCC register bank, starting +from the first RCC clock enable register (RCC_AHB1ENR, address offset 0x30). + +It is calculated as: index = register_offset / 4 * 32 + bit_offset. +Where bit_offset is the bit offset within the register (LSB is 0, MSB is 31). + +To simplify the usage and to share bit definition with the reset and clock +drivers of the RCC IP, macros are available to generate the index in +human-readble format. + +For STM32F4 series, the macro are available here: + - include/dt-bindings/mfd/stm32f4-rcc.h + +Example: + + /* Gated clock, AHB1 bit 0 (GPIOA) */ + ... { + clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOA)> + }; + + /* Gated clock, AHB2 bit 4 (CRYP) */ + ... { + clocks = <&rcc 0 STM32F4_AHB2_CLOCK(CRYP)> + }; + +Specifying other clocks +======================= + +The primary index must be set to 1. + +The secondary index is bound with the following magic numbers: + + 0 SYSTICK + 1 FCLK + +Example: + + /* Misc clock, FCLK */ + ... { + clocks = <&rcc 1 STM32F4_APB1_CLOCK(TIM2)> + }; + + +Specifying softreset control of devices +======================================= + +Device nodes should specify the reset channel required in their "resets" +property, containing a phandle to the reset device node and an index specifying +which channel to use. +The index is the bit number within the RCC registers bank, starting from RCC +base address. +It is calculated as: index = register_offset / 4 * 32 + bit_offset. +Where bit_offset is the bit offset within the register. +For example, for CRC reset: + crc = AHB1RSTR_offset / 4 * 32 + CRCRST_bit_offset = 0x10 / 4 * 32 + 12 = 140 + +example: + + timer2 { + resets = <&rcc STM32F4_APB1_RESET(TIM2)>; + }; diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index 40df3cd8ba..01a8cd641e 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -18,5 +18,5 @@ obj-$(CONFIG_CLK_UNIPHIER) += uniphier/ obj-$(CONFIG_CLK_EXYNOS) += exynos/ obj-$(CONFIG_CLK_AT91) += at91/ obj-$(CONFIG_CLK_BOSTON) += clk_boston.o - obj-$(CONFIG_ARCH_ASPEED) += aspeed/ +obj-$(CONFIG_STM32F7) += clk_stm32f7.o diff --git a/arch/arm/mach-stm32/stm32f7/clock.c b/drivers/clk/clk_stm32f7.c similarity index 86% rename from arch/arm/mach-stm32/stm32f7/clock.c rename to drivers/clk/clk_stm32f7.c index e1ee1731f7..4c5388adab 100644 --- a/arch/arm/mach-stm32/stm32f7/clock.c +++ b/drivers/clk/clk_stm32f7.c @@ -1,11 +1,12 @@ /* - * (C) Copyright 2016 + * (C) Copyright 2017 * Vikas Manocha, * * SPDX-License-Identifier: GPL-2.0+ */ - #include +#include +#include #include #include #include @@ -212,6 +213,17 @@ unsigned long clock_get(enum clock clck) } } +static int stm32_clk_enable(struct clk *clk) +{ + u32 offset = clk->id / 32; + u32 bit_index = clk->id % 32; + + debug("%s: clkid = %ld, offset from AHB1ENR is %d, bit_index = %d\n", + __func__, clk->id, offset, bit_index); + setbits_le32(&STM32_RCC->ahb1enr + offset, BIT(bit_index)); + + return 0; +} void clock_setup(int peripheral) { @@ -273,3 +285,48 @@ void clock_setup(int peripheral) break; } } + +static int stm32_clk_probe(struct udevice *dev) +{ + debug("%s: stm32_clk_probe\n", __func__); + configure_clocks(); + + return 0; +} + +static int stm32_clk_of_xlate(struct clk *clk, + struct fdtdec_phandle_args *args) +{ + debug("%s(clk=%p)\n", __func__, clk); + + if (args->args_count != 2) { + debug("Invaild args_count: %d\n", args->args_count); + return -EINVAL; + } + + if (args->args_count) + clk->id = args->args[1]; + else + clk->id = 0; + + return 0; +} + +static struct clk_ops stm32_clk_ops = { + .of_xlate = stm32_clk_of_xlate, + .enable = stm32_clk_enable, +}; + +static const struct udevice_id stm32_clk_ids[] = { + { .compatible = "st,stm32f42xx-rcc"}, + {} +}; + +U_BOOT_DRIVER(stm32f7_clk) = { + .name = "stm32f7_clk", + .id = UCLASS_CLK, + .of_match = stm32_clk_ids, + .ops = &stm32_clk_ops, + .probe = stm32_clk_probe, + .flags = DM_FLAG_PRE_RELOC, +}; -- 2.39.5